Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 285/778 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• How do I built a DIY NAS?

  - by Kaushik Gopal

  I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

  Read the article

• Lexmark's Linux Secret

  <b>Phoronix:</b> "There is one printer manufacturer though that as of last year has begun supporting Linux from top to bottom with their entire line-up of printers. Not only are they providing CUPS drivers, but also they are even printing Tux in the corner of every box they ship right besides the Windows and Apple logos."

  Read the article

• Win7 to Win7 Remote Desktop Not working, Xp to 7 working fine

  - by vlad b.

  Hello, I have a small home network and recently i tried to enable remote desktop for one of the pc's. I have a mix of Windows 7, Windows Vista and Xp runing alongside ubuntu, centos and others (some virtual, some real). I have a few Windows 7 pc`s that can be connected to using remote desktop from inside and outside the network (port redirects on routers, etc, etc) and some Xp ones. The trouble is when i tried to do the same thing to a Win7 laptop i discovered i can't connect to it from another win7 pc inside the home network. To sum it up Working: xp -- win7 not working: win7 -- win7 What i tried - disable and enable remote desktop (my computer - remote settings) - removing and adding users to the remote settings window - adding a new user to the machine, administrator or 'normal' user - checking the firewall settings on the machine and set 'allow' to remote desktop for both 'home/work' and 'public'networks Any tips on what should i do next? It displays ' .. secure connection' and after that the window with 'Your security credentials did not work' and it lets me try again with another user/password..

  Read the article

• Missing eth0 configuration file

  - by Godric Seer

  I have two servers both running Scientific Linux 6 on the same network. Since I want SSH access to both of them, I want to give them both static IPs so I can setup port forwarding and not worry how my router assigns local IPs. I found that I need to edit the configuration file /etc/network-scripts/ifcng-eth0, however that file does not exist. The network card works fine, and I am able to ssh as long as I access the router and find the local ip. Can I simply make my own configuration file, or did I miss some step in configuring the system that I need to complete?

  Read the article

• Asus Eee PC 1000HE wireless woes

  - by Vladimir Noobokov

  Ever since I have upgraded my Asus Eee PC 1000HE from Lucid 10.04 to Precise 12.04 I have been having issues with my wireless connections. At first I had wireless dropouts: I would be able to start using wireless, but then after a few minutes the wireless would stop working even though I was still connected to the network. Lately things turned worse: while I connect to my wireless network, it just never works. I tried all sorts of solutions on offer here and in other forums but none worked. At best I got the wireless to work up until I rebooted, at which point I would get the same symptoms again: the wireless network is there, but it's not really working. By now I tried so many different "solutions" I don't know where to start describing them; I have also reinstalled 12.04 several times, enough to make me lose faith in Ubuntu. Help here looks like my last resort. For the record, my Asus Eee PC 1000HE is equipped with an Atheros wireless card. I have reinstalled 12.04, ran all the suggested updates, and receive the following response when I type iwconfig in the terminal: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Arsenal" Mode:Managed Frequency:2.452 GHz Access Point: 00:04:ED:48:67:89 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-29 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:27 Invalid misc:57 Missed beacon:0 eth0 no wireless extensions. Thanks in advance for any help that might be offered.

  Read the article

• Windows Storage Server 2003 R2 RDP Disconnection

  - by Antitribu

  I am unable to remote desktop to our Windows Storage Server 2003 R2 machine. There are a few people about with similar issues but no answers around. Symantec End Point is installed but no network protection. Using rdesktop in Linux I receive: ERROR: send: Connection reset by peer NOT IMPLEMENTED: PDU 12 ERROR: Connection closed Where the "PDU XX" number changes on each connection. In windows using the latest mstsc I receive: The connection was lost due to a network error. Try connecting again. If the problem persists, contact your network Administrator. Any ideas?

  Read the article

• What type of VPS stats should I look for?

  - by Dave

  I have a few websites that average a total of 10,000 uniques a day across my network. I also have a few mobile apps that pull xml data maybe 5,000 calls a day. My sites aren't anything major just a few wallpaper websites and few other small sites, nothing real database intensive. I currently own a dedicated server and I feel like it's overkill for my network. I'm looking into getting a Virtual Private Server (VPS). I was just wondering what kind of stats I should be looking for to support my network of sites. Thanks

  Read the article

• cPanel's Web Disk - Security issues?

  - by Tim Sparks

  I'm thinking of using Web Disk (built into the later versions of cPanel) to allow a Windows or Mac computer to map a network drive that is actually a folder on our website (above the public_html folder). We currently use an antiquated local server to store information, but it is only accessible from one location - we would like to be able to access it from other locations as well. I understand that folders above public_html are not accessible via http, but I want to know how secure is the access to these folders as a network drive? There is potentially sensitive information that we need to decide whether it is appropriate to store here. The map network drive option seems to work well as it behaves as if the files are on your own computer (i.e. you can open and save files without then having to upload them - as it happens automatically). We have used Dropbox for similar purposes, but space is a issue with them, as is accountability and so we haven't used it for sensitive information. Are there any notable security concerns with using Web Disk as a secure file server?

  Read the article

• Configuring a Genius GW-7200 Access Point

  - by alex

  I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

  Read the article

• Internet not working on a VirtualBox Linux machine

  - by mtahmed

  I installed VirtualBox on a Windows 7 PC and installed Xubuntu (Ubuntu with XFCE) on it. Now on the Windows, I am connected to the internet through a LAN which automatically authenticates to connect to the network(because its my work computer). I have also installed the guest additions on this virtual machine (Xubuntu). I tried both NAT and bridging to set up internet connection but I still cannot connect to the internet. For NAT: The browser doesn't say website not found but it keeps trying to load it forever and the network status monitor (the one provided by VirtualBox) doesn't show any green light (no incoming packets). For Bridging: Same as for NAT but the network status monitor shows incoming packets and outgoing packets. But internet still doesn't work. I tried a lot of different things but none worked.

  Read the article

• Can't get bridged networking to work between linux guest virtual machine and Mac host

  - by tgoneil

  I'm trying to establish bridged networking from linux mint vsn 12 in virtualbox to a Mac Lion host. Mac config: Network setting: en3 configured by DHCP Sharing setting: Internet Sharing selected, Share connection from en3 to computers using en3 Virtualbox Linux setting: Network setting: Bridged Adapter, Name: en3 I can ping from host (192.168.2.1) to guest (192.168.2.2) and guest to host, but I Cannot ping from the Linux guest to the outside world. Connection in host is up, because I can ping from the Mac host to the outside world. Something else that's seems weird to me, in the Mac Network setting, the IP Address generated by DHCP says 169.254.243.185. What the heck is that?? When I open a terminal up in the Mac, however, ifconfig shows its en3 inet address as 192.168.2.1.

  Read the article

• Podcast Show Notes: Architect Day Panel Highlights

  - by Bob Rhubart

  The 2010 series of Oracle Technology Network Architect Day events kicked off in May with events in Dallas, Texas, Redwood Shores, California, and Anaheim, California. The centerpiece of each Architect Day event is a panel discussion that brings together the day's various presenters along with experts drawn from the local Oracle community. This week’s ArchBeat program presents highlights from the panel discussion from the event held in Anaheim. Listen The voices you’ll hear in these highlights belong to (listed in order of appearance): Ralf Dossmann: Director of SOA and Middleware in Oracle’s Enterprise Solutions Group LinkedIn | Oracle Mix Floyd Teter: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Basheer Khan: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Jeff Savit:  Oracle virtualization expert, former Sun Microsystems principal engineer Blog | LinkedIn | Oracle Mix Geri Born: Oracle security analyst LinkedIn | A 10-minute podcast can't really do justice to the hour-long panel discussion at each Architect Day event, let alone the discussion that is characteristic of each session throughout each Architect Day. But at least you’ll get a taste of what you’ll find at the live events. You’ll find slide decks and more from this first series of 2010 events in the Architect Day Artifacts post on this blog. More dates/cities will be added soon to the Architect Day schedule.  Coming Soon Next week’s ArchBeat program kicks off a three-part series featuring Cameron Purdy,  Oracle ACE Director Aleksander Seovic, and Oracle ACE John Stouffer in a conversation about data grid technology and Oracle Coherence. Stay tuned: RSS Technorati Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day del.icio.us Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day

  Read the article

• Why does eth0 show an IP if I'm booting into runlevel 1?

  - by banjer

  I'm having some issues with networking on a new Linux server I'm building. The OS is SLES 11. When booting into runlevel 1, I see that eth0 is showing an IP. Physically, there is a network cable plugged into the card associated with eth1, and then there is a network cable plugged into a QLogic iSCSI card (eth4, not shown). I've been troubleshooting this for awhile, and it seems like eth0 is somehow getting assigned an IP, even though it isn't configured in Linux or even plugged into the network for that matter. Thoughts? ifconfig -a Here is the ifconfig output (Sorry, I need more rep before I can post images on SF...)

  Read the article

• Troubles uploading big pics to Picassa when pics are on NAS

  - by Bascy

  Hi all, I'm working from Vista a laptop on a WLAN, my pictures are all on a shared (samba) network drive on a FreeNAS system, which has a wired network connection to the WLAN router (DLink 655). I'v noticed that when i try to upload pics to picassa, and select files from the network share the pics won't upload successfully. If i first copy them locally (on the laptop) and then upload them to picassa, everything works fine. If i try to copy smaller pics (<500kB) it doesnt go wrong Anybody know what is going wrong here?

  Read the article

• RemoteApp cannot connect to webapp

  - by user58505

  I have just set up a Server 2008 R2 machine with Remote Desktop Services. It's all running on the one server, just for a single application, which works fine locally and when using Remote Desktop Web Access on the local network. However, when accessing it over the Internet, you can log on to RD Web Access fine, but when running the RemoteApp you get the message: RemoteApp Disconnected The remote computer could not be found. Please contact your helpdesk about this error. The application and all Remote Desktop services are on a single machine. I have purchased and installed a GoDaddy Cert. It works like a charm in the local network, but I get the above message when trying to access through rdweb How can I enable the RemoteApp to function outside the local network? I think there is one or 2 steps I left out??.. Please help...

  Read the article

• auto-summarization: classful vs classless routing protocols

  - by yorble

  Suppose a router R1 is directly connected to the following subnets: 10.1.0.0/24 10.1.1.0/24 10.1.2.0/24 10.1.3.0/24 If it is running RIPv1, it will advertise: "i have the network 10.0.0.0" (implicitly understood by receiving RIPv1 routers as 10.0.0.0/8 because the protocol is classful) but suppose we changed the routing protocol to RIPv2 and turned ON auto-summarization. Would it behave in the same way? Would it advertise: "i have the network 10.0.0.0" (advertised WITHOUT subnet mask, and implicitly understood by other routers as 10.0.0.0/8) OR would it auto-summarize in a non classful way like: "i have 10.1.0.0/22" (advertised as network id and subnet mask pair) In other words, does turning on auto-summarization in RIPv2 (or other classless routing protocols) cause it to auto-summarize in a classful manner or simply auto-summarize classlessly to the best of its ability?

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• Need assistance setting up Linux Router with 2 public lans

  - by user195407

  I was assigned a.b.c.10/30 (Public IP) for my router and given a.b.c.9 as the gateway. I was also assigned x.y.z.128/25 (Public IP block) for my use. I want to setup a Linux router to handle this situation. My Linux box has 3 NICs, eth0 is a.b.c.10, eth1 I have assigned x.y.z.254, eth2 is unused at present. I have eth1 connected to a network switch, and several devices connected. Let's say box A is x.y.z.129 with a gateway of x.y.z.254. I have not connected to the network yet, as it is not live. What settings do I need to make, beyond adding the 2 network definitions to the cards and having "route add default gw a.b.c.9 eth0"? I may add a private 192.168.100.0/24 lan to eth2 later.

  Read the article

• acessing a subnetwork from within a vm

  - by yan bellavance

  I have a pc running windows 7. I have vmwareplayer running RHEL5 I have 1 physical ethernet connection. this ethernet connection is wired to a hub. there is another device on that hub that needs to be in a certain subnetwork (192.168.0.xxx)(lets call him device X) but the general network is 192.168.1.xxx How can I configure the network adapters so that I can ping device X from RHEL5 in the vm. Originally I could ping google from both windows and rhel (I was in the .1 network) but not device X since he is on a different subnetwork address. Now that I have put it on the .0 I can ping device X from windows but not from rhel5 and cannot access the web. I did this by manually setting the IP address.

  Read the article

• Cannot Access a Shared Folder Using Windows 2008

  - by peter

  Hi All, I have a NAS drive, and this is sharing some folders. I cannot access those folders from a windows 2008 machine which is on the network. The are both connected to the same network switch. e.g. if I go like this, \\server\ or \\server\folder I get the message 'windows cannot access \\server check the spelling, click diagnose' etc. Error code: 0x80004005 The thing is that I can connect to this shared drive from a windows 7 laptop connected wirelessly to the same network. I can ping the server from windows 2008, but only if I use the IP address, not the server name.

  Read the article

• Shared Folders in VirtualBox on Windows 7

  In my adventures with VirtualBox, my latest victory was in figuring out how to share folders between my host OS (Windows 7) and my virtual OS (Windows Server 2008).  Im familiar with VirtualPC and other such products, which allow you to share local folders with the VM.  When you do, they just show up in Windows Explorer and all is good.  However, after configuring shared folders in VirtualBox like so:   I couldnt see them anywhere within the machine. Where are Shared Folders in a VirtualBox VM? Fortunately a bit of searching yielded this article, which describes the problem nicely.  It turns out that there is a magic word you have to know, and that is the share name for the host OS: \\vboxsrv Once you know this, mapping shared folders is straightforward.  From Windows Explorer, click on the Map network drive option, and then map a drive to \\vboxsrv\YOURSHAREDFOLDER Like so: With that, its easy to share folders between the client and host OS using VirtualBox.  The reason I didnt simply use a standard network share to my host OS machine name is that both guest and host are in a VPN, and the VPN is over the Internet and in a different country, so when I went that route my files were (apparently) traveling from host to guest by way of the remote VPN network, rather than locally.  Using the Shared Folders feature dramatically sped up my ability to transfer files between Host and Guest machines. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Rip authedicatation from LDAP to Local

  - by oxinabox

  We are taking a small portion of out network offline, and running a separate network using that portion. (By small portion I mean 2 servers, that will be connected to 30 odd boxs that aren't usually part of our network, and don't need to authenicate) I intend to create a VM on one of the servers to provide general user services, and IRC server, remote shell etc. And I would like the users to be able to use there usual server log in details. Problem is the LDAP server that normally checks those details is not one of the severs. So I need to be able to some how take their details off LDAP and put them on the the server that is coming. One suggestion I had was to set a LDAP server on the VM locally, and clone the LDAP database onto it (using something called slapcat) is this the best way? Or can I I change the LDAP data into local authentication data?

  Read the article

• Apache server in raspberry PI not visible from outside( public IP)

  - by Kronos

  I have made a fresh install of Arch Linux ARM into a Raspberry PI and I mounted there a LAMP, all fresh. I have another Arch(x86) in my laptop with Apache also there, and as far as I know, two web servers cannot run in the same network segment so, the problem is as follows. I my laptop, having Apache running, if I enter via the public ip of my network everything turns ok and I can see my website but, (obviously turning this server down) if I enter from the public IP with the Apache running in the raspberry pi( yes, only that Apache running) i cannot see my website in there. Also, if I access via local network it is a normal success, I can see my website. So, I can enter my raspberry website only via local but in my other web server i can enter it via local and public. I have the same conf files in both of them so what is the difference? I was planning in making the rpi as a development server. Thanks in advance

  Read the article

• iptables forward rule not working in openwrt

  - by Udit Gupta

  I am trying to apply some iptables forwarding rules in openwrt. Here is my scenario - My server has two cards ath0 and br-lan. br-lan is connected to internet and ath0 to private network. The other m/c in n/w also has ath0 that connects with this server's ath0 and they are able to ping each other. Now, I want other m/c in network to use internet using br-lan of server so I thought of using iptables forwarding rule- Here is what I tried - Server : $ ping 1.1.1.6 // <ath0-ip of client> works fine $ iptables -A FORWARD -i ath0 -o br-lan -j ACCEPT $ /etc/init.d/firewall restart Client : $ ping 1.1.1.5 // <ath0-ip of server> works fine $ ping 132.245.244.60 // <br-lan ip of server> (not working) I am new to iptables stuff and openwrt. What I am doing wrong here ?? Any other help if anyone could suggest for my scenario Edit- m/c - machine n/w - network

  Read the article

• Can't the NetworkManager applet to appear in the Gnome panel in Ubuntu

  - by Nate

  I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >