Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 291/778 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

  • Access VirtualBox-ed server from behind the router

    - by migajek
    I'm having the following configuration: Windows 7 hosting VirtualBox and it's guest: Ubuntu The machine (physical) which runs VirtualBox is behind the router and has the address of 192.168.0.110 VirtualBox runs the Bridged network, and the IP of VirtualBox-ed Ubuntu (eth0) is 192.168.0.200 Host (Win7) is running HTTP service on port 80, while guest (Ubuntu) is running it's service on port 9000 I can access both services from inside the network by typing the ip_address:port and this works fine. Both ports are forwarded on the router to their's respective IPs: 80 -> 192.168.0.110:80 9000 -> 192.168.0.200:9000 Unfortunately, accessing the router's external IP doesn't work as expected. While external_ip:80 works correctly, external_ip:9000 - doesn't I believe the problem is VBox - related, since the same network is running also other physical machine with Ubuntu and http service on 8000 and this one is forwarded correctly.

    Read the article

  • SSL Certificate for local web server

    - by Firefly
    Is it at all possible to create a self-signed certificate for use on multiple machines on a local network which would stop the browser complaining it is not a trusted site? We have a product which is basically a computer running lighttpd to serve a web interface for configuring the computer (sort of how a router has a web interface). There can also be many of these machines running on the same network with dynamic IP's. What I basically want to do is enable SSL for extra security but I don't want people who are on the local network to be given a browser warning about the certificate not being trusted. Is this at all possible?

    Read the article

  • How do I set my router up to authenticate with my service provider?

    - by João Lourenço
    Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

    Read the article

  • Can't ping IPs for devices not part of Windows Domain

    - by GiddyUpHorsey
    I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

    Read the article

  • Ubuntu based VPN server behind NAT router?

    - by maartenn88
    I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

    Read the article

  • Make BIND use DHCP DNS as backup

    - by cainmi
    I run BIND locally on my OS X machine, to enable wildcard Apache vhosts, which requires setting the DNS server for all network interfaces to 127.0.0.1. This works great, but means when I am on a network which uses an internal DNS server to route special (i.e. .companyname) URLs to a server on the network, the lookup fails. I tried adding both 127.0.0.1 and the DHCP provided DNS server, but this doesn't work either. Is there a way to make BIND use the DHCP DNS server for requests it cannot resolve locally?

    Read the article

  • How to diagnose usb issue

    - by alexpotato
    Hey, So my kern.log and syslog files filled up with tons of the below messages: [514971.000109] phy0 - rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x30c4 with error -108. I was curious as to the steps to take, commands to run, places to look to help diagnose this issue (and curious as to what caused it)? I'm guessing it's something usb elated. I had some issues with my printer earlier today so this might be related. Thanks, Alex

    Read the article

  • No Other User In Task Manager Users Tab Windows 7

    - by Samuel Adam
    I want to ask why there is only me on Task Manager's Users tab. Originally I wanted to be able to chat with other clients on my local network using msg command, but I can't found any other user. How to see other users on the same network? I use Work Network, and all of the users is using wifi to connect. I googled about it, but no information is close enough. As much as a newbie question it sounded, I really appreciate any help. Thank you ! :)

    Read the article

  • switch duplicates packets and forward in two route

    - by sami
    there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

    Read the article

  • Taking stock of an existing ASA Firewall

    - by Nate
    Imagine you are given an existing network using an ASA firewall. The network works, but you aren't sure of anything else. The firewall may be completely improperly configured, with "outside" actually being inside and "inside" actually being outside, for all you know. My question is this: what are the commands to take stock of an existing ASA firewall setup? With only CLI access, how do I figure out: What interfaces are available The names of the interfaces The security levels attached to the interfaces The access-lists attached to the interfaces, including rules and directions I know how to set these things (interface, nameif, security-level, and access-list/access-group), but I don't know how to figure them out given an existing system. On a related note, is there anything else that I should worry about checking to make sure that the network isn't wide open? Thanks!

    Read the article

  • PDAnet on Android IP on PC is not public IP. Where does the NAT take place, PDAnet or Verizon?

    - by lcbrevard
    When using PDAnet on a PC (Win7 ultimate) to USB tether a Motorola Droid on Verizon 3G the IP address of the PC appears to be public - 64.245.171.115 (64-245-171-115.pools.spcsdns.net) - but connections show as coming from another public IP - 97.14.69.212 (212-sub-97.14.69.myvzw.com). Someone is performing Network Address Translation - either PDAnet or within the Verizon 3G network. Can someone tell me who is doing the NAT? Is it PDAnet or is it at Verizon? Is there any possibility of setting up port forwarding, such that connections to the public IP 97.14.69.212 (212-sub-97.14.69.myvzw.com) are forward to the PC? We are testing a network protocol that requires either a true public IP or forwarding a range of ports from the public Internet to the system on which the software runs (actually Linux hosted by VMware Player or Workstation on a PC running Windows).

    Read the article

  • How cloudfront works?

    - by Dharmik Bhandari
    I'm planning to Implement CDN(Content Delivery Network) of Amazon which is known as CloudFront in ASP.NET MVC3 with c#. I've googled about it but little bit confuse about few things mentions below. Is it compulsory that we have to uploads all static resources to CDN Network first and then we can use or Is it manageable by Amazon to crawl site static resources which is predefine folder or directory of sites? Is Amazon automatic update its copies when we anything change in static resources or every time we have to upload updated resources to CDN network.

    Read the article

  • ISA Proxy server

    - by user59931
    Have a proxy at work that runs Microsoft ISA. i used to be able to connect using 11.10 with firefox no problem at all. i could either put the settings in firefox or the settings in ubuntu network proxy settings. this would give me a connection no problem ( slow due to the work network being really lame) since i upgraded with 12.10 firefox just crashes if i have any proxy settings (manual added the proxy settings). if i connect to a diffrent network without the proxy settings it works fine and doesn't crash i tried chrome to see if that would work... simular problem. chrome doesn't crash but is so slow it just times out all the time and can take 10min for a page to load.... not really sure where to go with this? i have tried a clean install of 12.04 on 2 diffrent computers and also both tried just upgrading from 11.10. Only answer i can see at the moment is role back to 11.10 :( i have tried all sorts like turning of IPv6 to see if that would make any diffrence but no joy... really am lost now. whats weird is the repositys are also really really slow through 12.04. 50 megs took an hour to download (ISA server has Ubuntu rep servers enables without authenication). really am lost

    Read the article

  • osx 10.6 dhcp client-id option

    - by Clustermagnet
    Trying to join a osx machine on a dhcp network which forces certain client IDs. Even if I was to modify the client-id via the network properties, the DHCP server is not accepting this request, since Windows and Apple send this via different options You can set the ClassID in the Network Control Panel in the DHCP Client ID box. The trick lies in setting up your DHCP server to recognize it. Windows XP sends the DHCP class ID via DHCP option 77, and OS X sends it via option 61. You'll have to set your DHCP server to check for option 61, +with an offset of 1 and a length of 9+. That's the tricky bit. So, without modifying the DHCP server... (which does not belong to me), is there anything that can be done on OSX to modify the client-id option to be 77?

    Read the article

  • Is the BCM4306 wireless card ipv6 capable?

    - by horroricane
    I've been trying to connect with ipv6 enabled networks with my Broadcom Wireless card under Ubuntu 12.04. The wireless card model is BCM4306. $lspci $Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) $Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) I have been unsuccesful to connect through an ipv6 address, but I can still connect to a network when assigned an ipv4 address. While searching for an answer or a solution, I know the kernel can handle dealing with ipv6. So, what's left to question should be the hardware handling the connection. Unfortunately nothing comes up when I specifically try to search for information on BCM4306 ipv6 capabilities. I just tried using a wired connection to establish an ipv6 only connection to the network I'm on right now, but I got the same behavior of constant disconnections. Maybe it's not the hardware? I don't know.. I don't want to disable ipv6 on my machine as relevant networks I'll be connecting to will be using it exclusively, but I'm not sure what is wrong and which parts should I replace/fix to get this working.. Could someone please point me in a fruitful direction to get ipv6 working under Ubuntu 12.04?

    Read the article

  • wifi connection turns off oll the time

    - by er-v
    Hello! I realy need help with one strange problem. I have a wifi network in my appartment with wireless N home router Trendnet tew-652BRP. Everething work fine for three of my laptops, but I have one PC with D-Link DWA-140 adapter. It looses connection 2-3 times in 5 minutes. There is following messages in my system log when it does so: The browser has forced an election on network \Device\NetBT_Tcpip_{9537A5C1-3B43-4C56-B94C-CE69A257C3AD} because a master browser was stopped. The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] Comment: None The TCP/IP NetBIOS Helper service entered the stopped state. in order of appearence. How can I stop it? I have the latest driver installed.

    Read the article

  • Set Valid IP On Vmware Vm's Help Please

    - by Shahin At
    I Have a VPS.And i on my vps installed vmware workstation version 9.now i have 3 valid ip's: XXX.152.193.66 XXX.152.193.101 XXX.152.193.103 Gateway: XXX.152.193.65 now tow ip's set in host and i want to 1 ip set on vm. network vm is bridge and set ip on vm but this ip from out of internal network not ping and in vm not ping to gateway. What can I do to solve this problem? my ip is unassigned and only set on vm and use bridge network mode.and gw,mask,dns is set.but not ping. i set this ip on host and without problems is worked, But I do not know why on vm not worked. my host OS Is Windows Server 2003 and firewall is off and RRAs(routing and remote access) For VPN service is Enable. Do not host or virtual machines to create a IP route?

    Read the article

  • Wireless connection disconnects and reconnects with a Netgear WNA1000

    - by William Berkenkamp
    Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

    Read the article

  • What to do if people can't ping me?

    - by slayerIQ
    Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can I solve this?

    Read the article

  • Key Features of the Samsung SCX 5835FN

    The SCX 5835FN is just one in a long line of exceptional multifunction printers from Samung. Featuring some of the most advanced technology you';ll find on any modern printer, this all-inclusive devic... [Author: Derek Rogers - Computers and Internet - May 23, 2010]

    Read the article

  • Wireless only connects to Google

    - by dmanxiii
    I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

    Read the article

  • No blocked ports on internal interface of ASA

    - by blsub6
    I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

    Read the article

  • Setting up the metasploitable in virtualbox

    - by SetSlapShot
    I'm supposed to try and use kali to do exploits on metasploitable, but I'll burn that bridge when I get there. My question right now is: How do I set up a host only network on virtualbox? I heard that it was unsafe to run metasploitable in bridged networking mode, that host only or NAT is better. When I run metasploitable on NAT, the kali box (attacker) has the same ip address as the metasploitable box, and nmap doesn't really return anything except what I can only assume would be a scan of its own ports? I tried to create a host only network in virtual box. I left the adapter settings at the default, and unchecked DHCP server. now when I run ifconfig on the metasploitable box, there is no ip address listed. Am I setting up/connecting to/not configuring the host only network correctly?

    Read the article

  • VM clients can not access WAN

    - by Saariko
    I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

    Read the article

  • Windows VPN - NO internet access

    - by sharru
    I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

    Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >