Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 3/1221 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• Home networking problem between power line communication and Ethernet

  - by pixeline

  My network runs through the electrical wiring of the house and is organised as such: Groundfloor: an ADSL+network switch, using DHCP (address : 172.19.3.1) (Mac) PCs connected via an electrical adapter (model: D-Link DHP-200) (1 per PC) First Floor: 1 switch (8 ports) connected via an electrical adapter (model: D-Link DHP-200) (address unknown) 2 Mac PCs connected (via RJ45 network wires) to that router using DHCP The Problem On the first floor, file tranfers between PCs are fast and perfect. But if I try to transfer files from or to a computer on the ground floor, the speed is slow and eventually the transfer dies out. The Question So I suspect the 1st floor switch is creating some kind of barrier (firewall?) preventing external PCs from accessing the PCs it is connected to? Am I right and if so, how could I disable that barrier?

  Read the article

• networking with ssh thru wireless

  - by nkvnkv

  I am using Ubuntu 12.04 64bit on my desktop and my laptop. Have install openssh client and server on both of them. My desktop is connected to ADSL2+ Router TD-8840 with wired connection and has 192.168.1.1 IP address. My laptop is connected to 150Mbps Wireless N Router TL-WR741ND with wireless connection and has 192.168.0.1 IP address. ADSL2+ Router TD-8840 and 150Mbps Wireless N Router TL-WR741ND are connected with a wired cable by useing blue port for on wlan on TL-WR741ND. ifconfig from desktop desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:92:37:1f:3d inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:92ff:fe37:1f3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57508 errors:0 dropped:0 overruns:0 frame:0 TX packets:44508 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:51547633 (51.5 MB) TX bytes:6371374 (6.3 MB) Interrupt:43 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 00:23:cd:b1:ff:e4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:22 Base address:0x8400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:109 errors:0 dropped:0 overruns:0 frame:0 TX packets:109 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12044 (12.0 KB) TX bytes:12044 (12.0 KB) ifconfig from laptop laptop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:a0:d1:65:2a:42 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:31244 (31.2 KB) TX bytes:31244 (31.2 KB) wlan0 Link encap:Ethernet HWaddr 00:19:d2:1b:19:81 inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::219:d2ff:fe1b:1981/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1590 errors:0 dropped:0 overruns:0 frame:0 TX packets:1276 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:874763 (874.7 KB) TX bytes:315401 (315.4 KB) I can connect to desktop from laptop via ssh with no problem, internet connection on laptop and desktop is working fine, but when I want to connect to laptop from desktop via ssh in terminal I type ssh [email protected] and get ssh: connect to host 192.168.0.101 port 22: Connection timed out If anyone is able to point out whats wrong?

  Read the article

• win xp wifi networking

  - by user3485532

  I have 2 pcs with win xp and a wifi router ( without outgoing internet connection )...my job was to connect them over wifi to share some files. router was properly configured, both computers connected to wifi without problems, but when I tried to network them I could not see them in workgroup...i changed their names and added them to same workgroup but i couldn't connect pc1 to pc2 ( i could ping router from each pc but pinging other computer resulted in ping timeout) ..now i cant figure out why this is not working since I've done this before on more complex networks and it should work but...( maybe I have gremlins hiding somewhere..) edit1: Firewall is down on both machines( I disengaged it in both control panel and in services) and folder sharing and permissions are ok.. edit2: I know about Ad Hoc network ( wlan-to-wlan, without router/switch ) but that's not what I am trying to accomplish here :)

  Read the article

• Networking Logs for MAC Addresses

  - by NetworkGuy

  I wanted to ask a multi-part question. Does Comcast Cable Internet services record MAC Addresses of the Router behind the cable modem. I know they record it for the modem itself. But is there a way for the Modem/Comcast to relay and keep logs of the MAC ID of the Router itself? Then does a windows operating system Log the MAC ID of the Router when its connected to it? If so where do I locate and purge this? Please let me know all areas where it is Logged within the operating system. Thank you!

  Read the article

• System can't sleep, can't shutdown (might be networking related)

  - by Kevin Q

  I speculate it's networking related since I could only shut down my system if I do /etc/init.d/networking stop first. If I tried to put the system to sleep, it disconnect the network then reconnect it automatically, never goes to sleep. I uninstalled the network manager, then /etc/init.d/networking stop will not help shutdown the system anymore. When I boot into the OS, there were some warning about Unknown job:S20acpid,S20network-interface, S20network-manager . I got some advices to do update-rc.d -f to remove all those script, which I am not certain if it's right thing to do. The messages are gone but the problem remains. When I tried to restart, I used to get this message It doesn't seem to be the modem manager since I later removed it. Once upon a time, the fronze shutting down/restarting can be restarted when I presses Ctrl+Alt+Delete, and it says something like networking is stopped externally. If I log in single user mode, and shutdown or reboot, it show this screen I also tried GRUB_CMDLINE_LINUX_DEFAULT = "acpi=force" This is a Ubuntu 12.04 running on Thinkpad T520, not new installation, no such problems occurred before.

  Read the article

• Racing MMO for Linux - 2D or 3D - Massively Multiplayer Online Racing Games for Linux

  - by Paulocoghi

  I really like multiplayer racing games, like Need for Speed World or similar. I wonder if there is any MMO racing game for Linux (2D or 3D). Browser-based games are also accepted. Note: I tried this question in the Gaming Q&A of StackExchange (see link below), but one user said that my question was off-topic. http://gaming.stackexchange.com/questions/16329/racing-mmo-for-linux-2d-or-3d-massively-multiplayer-online-racing-games

  Read the article

• Oracle Linux Forum

  - by rickramsey

  This forum includes live chat so you can tell Wim, Lenz, and the gang what you really think. Linux Forum - Tuesday March 27 Since Oracle recently made Release 2 of its Unbreakable Enterprise Kernel available (see Lenz's blog), we're following up with an online forum with Oracle's Linux executives and engineers. Topics will be: 9:30 - 9:45 am PT Oracle's Linux Strategy Edward Screven, Oracle's Chief Corporate Architect and Wim Coekaerts, Senior VP of Linux and Virtualization Engineering, will explain Oracle's Linux strategy, the benefits of Oracle Linux, Oracle's role in the Linux community, and the Oracle Linux roadmap. 9:45 - 10:00 am PT Why Progressive Insurance Chose Oracle Linux John Dome, Lead Systems Engineer at Progressive Insurance, outlines why they selected Oracle Linux with the Unbreakable Enterprise Kernel to reduce cost and increase the performance of database applications. 10:00 - 11:00 am PT What's New in Oracle Linux Oracle engineers walk you through new features in Oracle Linux, including zero-downtime updates with Ksplice, Btrfs and OCFS2, DTrace for Linux, Linux Containers, vSwitch and T-Mem. 11:00 am - 12:00 pm PT Get More Value from your Linux Vendor Why Oracle Linux delivers more value than Red Hat Enterprise Linux, including better support at lower cost, best practices for deployments, extreme performance for cloud deployments and engineered systems, and more. Date: Tuesday, March 27, 2012 Time: 9:30 AM PT / 12:30 PM ET Duration: 2.5 hours Register here. - Rick

  Read the article

• Oracle Linux Delivers Top CPU Benchmark Results on Sun Blades

  - by sergio.leunissen

  From the Performance and Best Practices blog: Fresh SPEC CPU2006 results for Sun Blade X6275 M2 Server Modules running Oracle Linux 5.5. The highlights: The dual-node Sun Blade X6275 M2 server module, equipped with two Intel Xeon X5670 2.93 GHz processors per node and running the Oracle Enterprise Linux 5.5 operating system delivered the best SPECint_rate2006 and SPECfp_rate2006 benchmark results for all systems with Intel Xeon processor 5000 sequence. With a SPECint_rate2006 benchmark result of 679, the Sun Blade X6275 M2 server module, with two compute nodes per blade, delivers maximum performance for space constrained environments. Comparing Oracle's dual-node blade to HP's dual-node blade server, based on their single node performance, the Sun Blade X6275 M2 server module SPECfp_rate2006 score of 241 outperforms the best published HP ProLiant BL2X220c G5 server score by 3.2x. A single node of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 37% improvement in SPECint_rate2006 benchmark results and 22% improvement in SPECfp_rate2006 benchmark results compared to the previous generation Sun Blade X6275 server module. Both nodes of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 59% improvement on the SPECint_rate2006 benchmark and 40% improvement on the SPECfp_rate2006 benchmark compared to the previous generation Sun Blade X6275 server module.

  Read the article

• Simple Java networking game engine [on hold]

  - by Florian Peschka

  I want to create a simple java networking game and search a networking engine that eases use of sockets etc. I have already read some questions on here and the internet about java networking for games, but many of them were over 10 years old or not really answered. I have no idea whatsoever about what exactly I need to send in terms of messages, but I figured simple strings or integers will be enough for my purposes. It's basically a peer to peer game, so I don't need a centralized server structure. Messaging doesn't have to have an extremely low ping, yet of course all players need to have a synchronized view. What are the possibilities I have here?

  Read the article

• KVM virtual machine networking, NAT and bridge together

  - by stoqlt

  I have two running KVM guests on an Ubuntu (Lucid) host. One of them uses the simplest NAT method, and DHCP inside. The other uses the bridge method and static IP inside. Both work fine. Can I mix the networking methods? I'd like to create some set of scripts which used the local 192.168.122.x address, no matter if the guest has or not has an additional bridged LAN interface. Having eth0 and eth1 interfaces inside would be fine. Thanks for your interest.

  Read the article

• KVM/Libvirt bridged/routed networking not working on newer guest kernels

  - by SharkWipf

  I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

  Read the article

• CentOS networking BNX2

  - by james moore

  Having some trouble with my NICs. The server starts fine and I can wget/ping etc. However, when I /etc/init.d/networking restart I then receive the following error: Bringing up interface eth0: bnx2: fw sync timeout, reset code = 1030009 SIOCSIFFLAGS: Device or resource busy Consequently, the task fails. I have searched around on google users suggesting to disable PNP in the BIOS but I see no option. Here is some system information: $ ethtool -i eth0 driver: bnx2 version: 2.0.8-rh firmware-version: bc 2.9.1 $ uname -a Linux host 2.6.18-238.9.1.el5 #1 SMP Tue Apr 12 18:10:13 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux $/sbin/lspci | grep Broadcom 04:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) 08:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) $ lsmod | grep bnx2 bnx2i 81704 0 cnic 109512 1 bnx2i libiscsi2 77765 6 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi_tcp scsi_transport_iscsi2 73945 8 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2 bnx2 224780 0 scsi_mod 199001 15 mpt2sas,scsi_transport_sas,mptctl,be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sg,libata,megaraid_sas,sd_mod $ rmmod bnx2; modprobe bnx2 PCI: Enabling device 0000:05:00.0 (0158 -> 015a) PCI: Enabling device 0000:09:00.0 (0158 -> 015a) bnx2: fw sync timeout, reset code = 10300003 Any help would be appreciated as I am at a loss.

  Read the article

• Networking middleware

  - by Howie

  I'm looking for a networking middleware that may be suitable for a medium-sized MMO. I don't care in which language it's written, just that it's high-level, stable and has many of the features that can ease my development. I am making a 2D real-time action game. Come to think of it... I'd be happy with "just" a high-level networking framework that has a few handy features to ease the development of a general networked game.

  Read the article

• Connect android to linux laptop

  - by Claudio Ferraro

  I've a laptop with linux and wanna to connect an android device to the linux machine. On linux i have an mpd server installed. wanna to be able to connect from an android mpd client to the server which resides on the laptop. I tryed to create an Ad-hoc Wifi network on linux but the Android cannot find the Wifi network..How can I proceed..Should I buy a wifi access point or something like that ? I've a wifi router , it could help me somehow ?

  Read the article

• Oracle Linux at Oracle Openworld 2011

  - by Zeynep Koch

  In the Oracle Linux track, you'll learn how organizations of all sizes, in all industries, worldwide, are realizing the true benefits of complete and integrated solutions with Oracle Linux and Oracle's world-class Linux support program. Find out what Oracle is doing to simplify the development, deployment, and management of Linux solutions via significant testing initiatives including the Oracle Validated Configurations program. Also discover how Oracle is driving the enterprise Linux technology roadmap with new features and enhancements, making Linux a faster, better operating system for all. Meet Oracle's Linux engineers, experts, customers, and partners, and get answers to all your Linux questions. Here are the Linux sessions and demos that you don't want to miss. · Oracle Linux Strategy and Roadmap · New Features in Oracle Linux · End-to-End Data Integrity Solution for Linux · Debugging and Configuration Best Practices for Oracle Linux · Demos · Hands-on-Labs Register by July 29 and get a $500 discount.http://bit.ly/kSjDMD

  Read the article

• Hyper-V 2008 R2 synthetic networking stops working with linux 2.6.32.15

  - by luxifer

  Hi there, so I thought I'd give Hyper-V on Windows Server 2008 R2 Enterprise a try on my Homeserver (yes, it's legit... got it from msdnaa). First thing to throw at it was my firewall which runs IPFire. This distribution currently uses the kernel version 2.6.32.15 and comes with the Hyper-V drivers. So I enabled them and at first they work just fine but after a few minutes they just fail. There are no packages going in or out anymore until I reboot the VM but sometimes even that won't work so the VM just keeps "Stopping" like forever. Emulated networking works fine but it slow and uses more CPU. That way my firewall routes slower than when running under virtualbox on an atom N270. My server has an E6750; VM is limited to 25%, but that should still outperform this atom CPU especially since it's never going anywhere near 100% CPU load, so give me a break! A quick google search led me to people having the same problem (even with other distributions and kernel versions that include those drivers) but no solution yet... I already found this but I can't quite follow the author on the part where he solved the issue - especially since I need two virtual nics for my firewall distro to work (obviously one internal and one external) What am I missing here?

  Read the article

• Wireless disabled after connecting ethernet cable

  - by user1716672

  Im using Linux Mint 13. Wireless has always worked fine but stopped yesterday after I connected to the internet via an ethernet cable. I ran: sudo rfkill list gives me: 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no sudo rfkill unblock 0 sudo rfkill list gives me 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no sudo service networking start results in: networking stop/waiting The contents of /etc/network/interfaces is auto lo iface lo inet loopback Any ideas what I can do?

  Read the article

• The Oracle Linux Advantage

  - by Monica Kumar

  It has been a while since we've summed up the Oracle Linux advantage over other Linux products. Wim Coekaerts' new blog entries prompted me to write this article. Here are some highlights. Best enterprise Linux - Since launching UEK almost 18 months ago, Oracle Linux has leap-frogged the competition in terms of the latest innovations, better performance, reliability, and scalability. Complete enterprise Linux solution: Not only do we offer an enterprise Linux OS but it comes with management and HA tools that are integrated and included for free. In addition, we offer the entire "apps to disk" solution for Linux if a customer wants a single source. Comprehensive testing with enterprise workloads: Within Oracle, 1000s of servers run incredible amount of QA on Oracle Linux amounting to100,000 hours everyday. This helps in making Oracle Linux even better for running enterprise workloads. Free binaries and errata: Oracle Linux is free to download including patches and updates. Highest quality enterprise support: Available 24/7 in 145 countries, Oracle has been offering affordable Linux support since 2006. The support team is a large group of dedicated professionals globally that are trained to support serious mission critical environments; not only do they know their products, they also understand the inter-dependencies with database, apps, storage, etc. Best practices to accelerate database and apps deployment: With pre-installed, pre-configured Oracle VM Templates, we offer virtual machine images of Oracle's enterprise software so you can easily deploy them on Oracle Linux. In addition, Oracle Validated Configurations offer documented tips for configuring Linux systems to run Oracle database. We take the guesswork out and help you get to market faster. More information on all of the above is available on the Oracle Linux Home Page. Wim Coekaerts did a great job of detailing these advantages in two recent blog posts he published last week. Blog article: Oracle Linux components http://bit.ly/JufeCD Blog article: More Oracle Linux options: http://bit.ly/LhY0fU These are must reads!

  Read the article

• how to compute differences between two binaries (i.e., two executables) in linux

  - by Indranil

  In Linux is there any way to compute the differences between two binaries (i.e., two executables)? Let me be more specific: I want to know how to compute the delta (delta difference) between two versions of an executable or application or software in Linux. For example if I have to download and install only the updated part (the delta difference between the latest version and the old version) of an existing application or binary how do I do that in Linux.

  Read the article

• IASA Sessions on Social Networking Note Influence of Millennial Generation on Insurance Technology

  - by [email protected]

  Helen Pitts, senior product marketing manager for Oracle Insurance is blogging from the 2010 IASA Annual Conference and Business Show this week. Social networking continues to be a buzzword for many in the industry. Erin Esurance, the Geico Gecko and even Nationwide's "The World's Greatest Spokesperson in the World" all have a prominent presence in the social media world. Sessions at the 2010 IASA Annual Conference and Business Show this week in Grapevine, Texas, highlighted how the millennial generation's exploding use of social media is spurring more carriers to leverage tools like Facebook, LinkedIn and other social networks to engage prospect and customers. While panelists encouraged carriers to leverage social networking tools for marketing and communications, they expressed the need for caution and corporate governance when it comes to using the tools as a part of claims, underwriting, and human resources recruitment business practices, and interactions with producers. (A previous Oracle Insurance blog entry by my colleague Susan Keuer noted that social networking and its impact on the underwriting process was also a hot topic at the recent AHOU conference.) Speaking of the millennial generation, IASA announced a new scholarship program and awarded three scholarships during the association's conference this week. The IASA Insurance Industry Collegiate Scholarship Program awards $2,000 scholarships to students in their second or third year of college who are studying an insurance-related field at a four-year college or university. The IASA scholarship committee is co-chaired by Wendy Gibson, vice president of business development for Oracle Insurance. Gibson, a long time IASA volunteer, is completing her second term on IASA's volunteer management team as vice president of industry relations. Helen Pitts is senior product marketing manager for Oracle Insurance.

  Read the article

• VirtualBox host-only networking fails on Ubuntu 11.10 host

  - by Jeremy Kendall

  I've installed Ubuntu 11.10 on a new Lenovo Thinkpad 420s and I'm trying to get some VirtualBox VMs up and running (using Vagrant). Everything works fine until I try to add host-only networking. This is the failure I get in the terminal: I set logging to debug and tried again. Here's a paste of the relevant portion of the log. When I try to add host-only networks with the VirtualBox gui (File-Preferences-Networking-Add host-only networking), I get the following error message: This error is occurring with three different virtual boxes, all Ubuntu 11.10 64bit guests, one of which I've run without issue on a Windows host and an OSX host. Here is the Vagrantfile for the box I've successfully run on Windows and OSX: Vagrant::Config.run do |config| config.vm.box = "ubuntu-11.10" config.vm.box_url = "http://timhuegdon.com/vagrant-boxes/ubuntu-11.10.box" config.vm.network :hostonly, "192.168.33.10" config.vm.customize ["modifyvm", :id, "--memory", "512"] config.vm.customize ["modifyvm", :id, "--natnet1", "10.0.28.0/24"] config.vm.forward_port 80, 4567 end I've tried two other boxes as well, one of which I built last night with veewee, all of which are getting the exact same error. I've used rvm to install ruby 1.9.3-p125 [ x86_64 ], and I've got Vagrant running in its own gemset. I've Googled quite a lot and haven't been able to find any resolution. Suggestions?

  Read the article

• Linux does not communicate to Windows subinterface

  - by artaxerxe

  I set my NIC on Windows so that I have two interfaces: one (the first one) has IP 192.168.0.5 the other one has IP 10.10.10.1. On a Linux machine I set an interface to 10.10.10.2. On another Linux machine I set the interface to 10.10.10.3. And tried to ping those machines. Here is the result. Linux to Linux is ok. Windows to Linux also is ok. But Linux to Windows does not work. Can you help me on getting the communication between Linux and Windows? What should I do for this? I have to mention that those machines are connected through a switch. If you need any details, ask me please! Thanks in advance!

  Read the article

• New to Linux Kernel/Driver development...

  - by CVS-2600Hertz-wordpress-com

  Recently, i began developing a driver of an embedded device running linux. Until now i have only read about linux internals. Having no prior experience in driver devlopment, i am finding it a tad difficult to land my first step. I have downloaded the kernel source-code (v2.6.32). I have read (skimped) Linux Device Drivers (3e) I read a few related posts here on StackOverflow. I understand that linux has a "monolithic" approach. I have built kernel (included existing driver in menuconfig etc.) I know the basics of kconfig and makefile files so that should not be a problem. Can someone describe the structure (i.e. the inter-links) of the various folders in the kernel-source code. In other words given a source-code file, which other files would it refer to for related code (The "#include"-s provide a partial idea) Could someone please help me in getting a better idea? Any help will be greatly appreciated Thank You.

  Read the article

• Game Networking Help Jmonkey SpiderMonkey

  - by user185812

  I have decided I think Jmonkey Engine will be best for my project, (an online RTS), but I have one question. If my game were to be successful (Yes I understand how slim the chances are, and how difficult this can be) I don't quite understand an aspect of networking. Do games like this require multiple servers, or only a single server? If multiple servers, I was unable to find anything regarding if Jmonkey's SpirderMonkey Networking supports this. (Something to allow equal distribution of traffic to multiple servers). UPDATE: I plan on using Jmonkey for my project. My Project is an online RTS, but with somewhat of an FPS twist. I am currently trying to figure out if the game has heavy traffic if having multiple servers to host the game is recommended. In addition to this, if using multiple hosting servers is supported in Jmonkey as I can't seem to find any documentation regarding it.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >