Search Results

Search found 11482 results on 460 pages for 'portable device'.

Page 317/460 | < Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >

  • boot failure trying to install linux distro from a cd

    - by jdamae
    Hoping someone can help me get this installation from a cd going. I'm using an older pc: hp pavillion 2.66Ghz, 512RAM with a BIOS revision of 6/30/2003. I reclaimed some an older drive (Seagate ST340810A) that seems to be working as its recognized in the bios (auto-detected) I downloaded a mini.iso of ubuntu 10.10 that I want to install and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM] and I disabled devices 2-4 so I can just force it to read first from the CDROM. This old pc also has a separate CD writer which is a Sec.Slave, so the Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned cd with the linux distro. So, with these settings I cannot get it to boot. I get the "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". Where do I go from here? Thanks.

    Read the article

  • 10 System LAN latency with ADSL modem as gateway

    - by itsoft3g
    Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

    Read the article

  • Cloning a linux system from sdx to cciss

    - by churnd
    I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

    Read the article

  • Problems with webcam

    - by Murtaza
    My friend is using Windows 8.1, and he has a webcam. He says it is working very well even without installing drivers. Webcam is A4tech - PK-331F. I asked for this webcam for use. I plugged in the webcam, and Windows detected it and installed drivers automatically. Then I opened Skype to check the webcam. I got a message from Skype that said, "Your webcam has microphone." When I clicked over it, it directed me to sound settings where it showed that the webcam microphone was working. I went to video settings, but the webcam wasn't listed there. As you can see in the image, the webcam is not listed. It is listed in Device Manager but isn't listed in Skype. I am using Windows 7 Professional. Any idea why this is happening?

    Read the article

  • Wireless dropouts that only affect subset of devices

    - by jwaddell
    When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

    Read the article

  • How to add addtional disks to a Windows 2008 KVM based Guest?

    - by taazaa
    I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

    Read the article

  • How to create direct RS232 (PPP) connection from Windows 7

    - by Jonny Wright
    I'm trying to create a direct connection to a hardware device via RS232 serial connection. Am using a USB to Serial adapter and works fine in WinXP but the option seems to have disappeared in Win7. This is the only connection option available for this piece of hardware so I have no choice. Currently have a netbook with WinXP installed purely for interfacing with this hardware. In XP it was just a matter of creating an "Advanced connection" and then "Directly to another computer" etc, I can find no such options in Win7.

    Read the article

  • Cisco redundancy modes

    - by user974896
    I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

    Read the article

  • Anybody know how to get podcasts sorted correctly on a Zune?

    - by Will
    If I could understand the logic behind it I could actually manage to get my stuff sorted correctly on the device. It doesn't matter how things are sorted on disk, or in the software itself. As items are added to the sync list they end up sorted in some weird manner which, quite frankly, brings out an anger in me that scares me. A primitive, misshapen and unthinking anger. Kind of like the lumpy guy in Altered States. Frankly, I'm afraid one day its going to burst forth and I will track down the entire Zune team and make them pay for their failures. Help me prevent this from happening. Help me understand what I need to do to ensure my podcasts end up in the order I wish them to be in, not some obscure random order that makes no sense.

    Read the article

  • Logitech bluetooth audio receiver quality

    - by lietus
    I bought a Logitech Bluetooth Audio receiver, and have run into a problem: When playing audio, it contains short hisses/clicks on higher tones or vocal+heavy instrumental music (Sound quality appears to be unclean). I'm not sure what could be the reason, but this only happens when I play from certain devices. My laptops (a Dell XPS Win7, and an Asus Eee seashell Win7) and my phone (Samsung Player 5) both have the problem. However, when I tried using a Samsung S2 phone, the audio was crystal clear. Seems that this could be something with Bluetooth transiting device.. Has anyone encountered a similar problem?

    Read the article

  • How to create a filesystem mountable by windows in linux?

    - by wcoenen
    I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this: created a single partition with fdisk /dev/sdc (and some more commands in the interactive session that follows) formatted the partition with mkfs.msdos /dev/sdc1 If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized. How do I create a FAT32 file system which can actually be used in windows? edit: I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.

    Read the article

  • USB forwarding from dom0 to domU

    - by Karolis T.
    What are my options to forward two USB connected phones to xen guest? I've read about PCI-passthrough http://www.wlug.org.nz/XenPciPassthrough, but I'm sure usb controller in the server isn't a pci card. There's device level forwarding, but I need to forward two devices, this here doesn't say how to do it: http://www.olivetalks.com/2008/02/03/usb-forwarding-on-xen-it-just-does-not-work/ Would something as simple as: usbdevice = [ 'host:xxx', 'host:yyy', ] work? EDIT: I'm now starting a bounty. This is really important for me and for other people also, hoping someone who have this resolved will be able to help.

    Read the article

  • Problems with webcame

    - by Murtaza
    My friends is using windows 8.1 and he has a webcam. He says it is working very well even without installing drivers. Webcam is A4tech - PK-331F. I asked for this webcam for use. I plugged that that webcam and windows detected it and installed drivers automatically. Then I opened Skype for checking webcam. I got massage on top of Skype that "your webcam has microphone" when I clicked over it, it directed me to sound settings where I microphone of webcam was working. I went to videos settings but webcam wasn't listed their. As you can see in image. Webcam is listed in device manager but isn't listed in Skype. I am also using windows 7 professional. Any idea why it is happening?

    Read the article

  • ASA5500 series logging for management interface in transparent mode

    - by ANervousTwitch
    i have a cisco asa5520 in transparent mode. the interface is on the same subnet as some windows machines, which are generating a lot of broadcast traffic that is filling up the logs. is there any way to have it not log that its blocking those packets? its a bunch of these messages: "through-the-device packet to from management-only network is denied: udp src..." im also seeing some of those zeroconf requests that id like to drop logging for. i tried to just put a rule on the management interface, but apparently thats not allowed.

    Read the article

  • Possible to use DRBD on two ESXi virtualized servers?

    - by chen
    I have two servers (attached disks have been set up as hardware RAID1 for disk device level failure resilience). Here is the setup in my mind: 1) Install ESXi on each of the physical server, M1, M2; 2) Start one VM on each of the ESXi virtualized physical server V1, V2; 3) Install the DRDB drivers within V1 and V2. Essentially, this is a "virtualizing machine running DRBD in the VM's instead of bare metal hardware" idea. My question is whether the above setup can achieve the same "networked RAID1" goal that DRDB can achieve in the bare-metal physical machines (http://www.drbd.org/). Thanks. [EDIT] I found this (http://serverfault.com/questions/49305/drbd-experimentation-and-virtualization) is a similar question, but the answer does not seem to be firmative enough for me to follow.

    Read the article

  • Which is better for multi-use auth, MySQL, PostgreSQL, or LDAP?

    - by Fearless
    I want to set up an Oracle Linux 6 server that gives users secure IMAP email (with dovecot), Jabber IM, FTP (with vsftpd), and calDav. However, I want each user logon to be able to authenticate all services (e.g. Joe Smith signs up once for a username and password that he can use for email, ftp, and his calendar). My question is, which database service will be best suited for that application? Also, is there a way to link the database with the preexisting server shell logins (e.g. so I can read the root account's LogCheck emails on a different device)?

    Read the article

  • Finding spoofed IP address on network

    - by Jared
    I have a few IP spoof dropped messages coming out of my Sonicwall firewall, we'll call them Source A and Source B. Both of these sources have the same mac address indicating they're coming from the layer 3 switch behind my firewall. Source A has an ip within a valid subnet on my network and it shows up in the ARP table of my layer 3 switch. I was able to trace the exact location and fix the issue. Source B's ip however, is not within valid subnet on my network and it's not showing up in my layer 3 switches arp table. Any idea how I can trace the location of this device within my network? Thanks in advance.

    Read the article

  • Rollback driver in Windows via command line

    - by ultrasawblade
    I have a remote system in which I've updated the Nvidia graphics driver, but now RDPDD.dll, which I'm guessing stands for RDP Display Driver, will not load (found this out via Event Viewer). I can use Sysinternal's Psexec to execute commands though. I'm sure something has gone very wrong and the user of this system (a CAD engineer) won't be able to use his system normally. I've tried two remote reboots and that has not resolved the issue. So I would like to use the "Roll Back" option for the Nvidia driver in the device manager. Is there a command-line way of doing this?

    Read the article

  • some keyboard keys not working properly

    - by surfmadpig
    I'm using Windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

    Read the article

  • Jumbo Frames, ISCSI and ESXi

    - by vlannoob
    I have enabled Jumbo Frames (9000) in ESXi for all my vmNICs, vmKernels, vSwitches, iSCSI Bindings etc - basically anywhere in ESXi where it has an MTU settings I have put 9000 in it. The ports on the switches (Dell PowerConnects) are all set for Jumbo Frames. I have a Dell MD3200i with 2 controllers, each with 4 ports for iSCSI. Each of these ports is set to Jumbo Frames (9000) as well. So now the questions: Do I need to log into each Windows Server VM I am running and delve into the NIC properties and manually set it to Jumbo Frames in the NIC properties in the device Manager as well? Whats the best way of testing that Jumbo Frames are indeed working as intended?

    Read the article

  • Virtual Network Printer

    - by user113720
    I'm pretty new to Microsoft Servers so don't blame me if the question isn't that smart [I'm a Unix guy]. I need to install a Virtual Printer of a Microsoft Server 2008 r2. The requirements are: The printer must print on a file {whatever file... txt or pdf } The printer must run on a server The printer must accept plaintext from a specific IP:port The connection between the device that prints and the server is a local network I've tried to install a virtual printer, but I cannot specify the constraint about the socket from which receive data to print. Thank you so much

    Read the article

  • Google Analytics unexplained spike

    - by Dianne
    My client's Google Analytics has had a spike everyday from May 6th (from 0 - 100.) This is in a city that he is not optimized for and does very little business in. The hits are coming in direct to the website. My client is concerned that it has something to do with competition using his site as a price shopping device. I can't view the ip to see where they are coming from and his site is not built in PHP so the work around doesn't work here. Any thoughts? Could it be a "referring site" situation and if so is there a way for me to find out what the referring site is?

    Read the article

  • LPR command won't recognize CUPS printer

    - by Datapimp23
    I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

    Read the article

  • Windows (7 & Vista) laptop monitor does not come back after closing lid

    - by Scott Vercuski
    I'm experiencing an issue with Windows Vista (and now Windows 7) with my laptop. When I close the laptop lid the monitor goes blank but will not come back on after I re-open the laptop. The screen stays blank and nothing that I do will get it to come back. The laptop is an HP DV9000 series. Has anyone else ran into this issue? One of the solutions I've seen online is to go into the device manager and replace the lid driver with something nonsensical (the website suggested pointing the driver at the sound recorder). This does solve the problem by disabling the lid but doesn't really resolve the root issue. I'm asking if anyone has any method I can use to debug what's going on. How do I tell if it is an operating system issue vs. a malfunction within the lid itself. I'd actually like the lid to function as it's meant to. Thank you!

    Read the article

  • harddrive problem (usb external)

    - by masfenix
    Hey guys I am using a Maxtor One Touch 3 given to my by my uncle. It is connected through USB2.0 When I plug it in, XP installs it and says "the device is ready to use". But it dosnt show up on my computer. It dosn't even show up in disk mangement. I then install Acronis Disk Director (which detects it) but marks it as offline. if i try to change it to online, nothing happens. (actually the lights on the HD blink - meaning communication and goes back into offline mode). The lights on the HD return to a solid which mean "working properly". Here is a screenshot: Is there any way to extract the data off the drive? is the drive corrupt? sitll useable? edit: DISKPART screenshot: edit2: I ran Seagate diagnostic tool and this came up: Long Generic - Started 9/10/2010 6:44:36 PM Bad LBA: 0 Unable to repair Long Generic - FAIL 9/10/2010 6:46:41 PM SeaTools Test Code: 4

    Read the article

< Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >