Search Results

Search found 8897 results on 356 pages for 'hit detect'.

Page 326/356 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

  - by LDelgado

  Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

  Read the article

• How do I reset/update my BIOS for Optiplex GX280?

  - by Sam Langlhey

  So far this has been a nightmare for me, which has been frustrating me constantly. I am using Dell Optiplex GX280 with Windows XP home edition, which is running a BIOS version A04. Recently, i've rebooted the pc to find out that its not booting. It will get to the Windows boot up screen with the progress bar but only to restart to the same process again, over and over. Frustrated that I am, i've inserted the Windows recovery CD to at least either repair of reinstall the operating system to find out that was not possible. I hit F8 to have the boot options, each of the boot option that I've selected gave me an error saying: "Selected boot device is not available." Right after that, I went to the BIOS setting and did a diagnostic test, which recognized all the Boot devices onboard. Now, I cannot even repair of reinstall Windows XP, because the system is not booting from none of the boot devices. The surprise is when I removed the hard-drive from the computer and loaded it on into another computer successfully; that's right, there is nothing wrong with the hard drive. After that I was totally puzzled. I found a few pointers online saying that the BIOS start-up block might be corrupted itself and I might need to flash/update the BIOS. I found the detailed instruction on how to create a Boot up disk by downloading the BIOS firmware from the manufacture's website. I did exactly as instructed below: Download the latest version or your choose version of BIOS file for your computer or motherboard from the manufacturer’s support site. Rename the downloaded file to AMIBOOT.ROM. Copy the file to a floppy disk. Insert the floppy disk to the floppy drive. Turn on the system. After I did that and powered on the PC to boot from the floppy drive, it gave me this error message: "Non-System Disk or Disk Error. Replace and Strike any key when ready." I did all that, and I kept on pressing [Ctrl]+[Home] to force it, but it did not did any satisfying result. Desperate as I am, my next attempt is to try the instruction below. Since I want to be ready, in the event it does not work, do you have any solution that you can provide? Please keep in mind that I cannot boot from any of the devices at this moment. My only hope now is to come on with a solution that will work through the Floppy drive, since that's the only drive that affected. Thank you very much for your advice and support in advance. To create a Windows startup disk, insert a floppy disk into the drive of a similarly configured, working Windows XP system, launch My Computer, right-click the floppy disk icon, and select the Format command from the context menu. When you see the Format dialog box, leave all the default settings as they are and click the Start button. Once the format operation is complete, close the Format dialog box to return to My Computer, double-click the drive C icon to access the root directory, and copy the following three files to the floppy disk: Boot.ini NTLDR Ntdetect.com

  Read the article

• Apache URL rewriting in reverse proxy

  - by Jeremy Gooch

  I'm deploying Apache in front of a Karaf-hosted application (Apache and Karaf are on separate servers). I want Apache to operate as a reverse proxy and also to hide part of the URL. The URL to get the log-in page of the application directly from the app server is http://app-server:8181/jellyfish. Pages are served by the Jetty instance running within Karaf. Of course, this behaviour would usually be blocked by the firewall for everything except the reverse proxy server. With the firewall off, if you hit this URL then Jetty loads the log-in page. The browser's address bar correctly changes to http://app-server:8181/jellyfish/login?0 and everything works. What I want is for http://web-server (i.e. from the root) to map to Jetty on the app server with the name of the app (jellyfish) suppressed. e.g. The browser would change to show http://web-server/login?0 in the address bar and all subsequent URLs and content would be served with the web-server's domain and without the jellyfish clutter. I can get Apache to operate as a simple reverse proxy, using the following config (snippet):- ProxyPass /jellyfish http://app-server:8181/jellyfish ProxyPassReverse / http://app-server:8181/ ...but this requires the browser's URL to contain jellyfish and going to the root URL (http://web-server) gives a 404 Not Found. I've spent a lot of time trying to use mod_rewrite with and without its [P] flag to get around this, but without success. I then tried the ProxyPassMatch directive, but I can't seem to get that quite correct either. Here's the current config, as is loaded into /etc/apache2/sites-available/ on the web server. Note that there is a locally-hosted images directory. I've also kept the mod_rewrite proxy exploit protection and am suppressing a couple of mod_security rules that were giving false positives. <VirtualHost *:80> ServerAdmin admin@drummer-server ServerName drummer-server ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /images/ "/var/www/images/" RewriteEngine On RewriteCond %{REQUEST_URI} !^$ RewriteCond %{REQUEST_URI} !^/ RewriteRule .* - [R=400,L] ProxyPass /images ! ProxyPassMatch ^/(.*) http://granny-server:8181/jellyfish/$1 ProxyPassReverse / http://granny-server:8181/jellyfish ProxyPreserveHost On SecRuleRemoveById 981059 981060 <Directory "/var/www/images"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> </VirtualHost> If I go to http://web-server, I get redirected to http://web-server/jellyfish/home but this gives a 404, with a complaint about trying to access /jellyfish/jellyfish/home - NB the browser's address bar does not contain the double /jellyfish. HTTP ERROR 404 Problem accessing /jellyfish/jellyfish/home. Reason: Not Found And, if I go to http://web-server/login, I get redirected to http://web-server/jellyfish/login?0 but this gives a 404, with a complaint about trying to access /jellyfish/jellyfish/login. HTTP ERROR 404 Problem accessing /jellyfish/jellyfish/login. Reason: Not Found So, I'm guessing I'm somehow passing through the rules twice. I am also slightly bemused as to where the home bit of the URL comes from in the first example. Can someone point me in the right direction, please? Thanks, J.

  Read the article

• Parallel processing slower than sequential?

  - by zebediah49

  EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

  Read the article

• Issues Converting Plain Text Into Microsoft Word Bulleted Lists

  - by user787832

  I'm a programmer. I hate status reports. I found a way to live with it. While I am working in my IDE ( Visual Slickedit ) I keep a plain text file open in one of the file/buffer tabs. As I finish things I just jot down a quick note into that file. At the end of the week that becomes my weekly status report. Example entries: The Datatables.net plugin runs very slowly in IE 8 with more than 2,000 records. I changed the way I did the server side code to process the data to make less work for the plugin to get decent performance for the IE 8 users. I made a class to wrap data from the new data collection objects into the legacy data holder objects. This will let the new database code be backward compatible with the legacy code until we can replace it. I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site At the end of the month I go back to each weekly *.txt file and paste all of the entries into a MS Word file for a monthly report. I give the monthly report to a liason to the contracting company who has to compile everyone's monthly reports into a single MS Word 2007 document. His problem, soon to be my problem, comes when he highlights my paragraphs like the ones above to put bullets in front of my paragraphs. When he highlights my notes to put bullets in front of them with MS Word 2007, Word rearranges the text a bit and the new line chars/carriage returns stagger the text so the text is no longer in neat chunks. This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site Becomes This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site I tried turning word wrap on in my IDE for the text files I put my status notes in. It just puts some kind of newline character in anyway. Searching/Replacing those chars in the text files has the result of destroying the paragraphs. Once my notes are pasted into MS Word, Word automatically translates them into paragraph breaks. Searching/Replacing them there has similar results. Blank lines separating the notes disappears. One big mess. What I would like is to be able to keep adding my status notes to a text file as I am now, but do something different when I paste the notes into MS Word such that my liason can select the text, hit the bulleting command and NOT have the staggered text as shown above. Any ideas? Thanks much in advance Steve

  Read the article

• Capistrano + Nginx + Passenger = 403

  - by slimchrisp

  I asked this over at stackoverflow as well, but still haven't received any answers that have helped me to solve this problem. I have spent almost a week at this point trying to solve the issue, and I'm just not making any headway. It seems that this issue is pretty common, but none of the solutions I found online work for me. A buddy of mine is actually creating the same setup, and he is having the same issue. After a few days stuck with the 403 error I started over using this tutorial: http://blog.ninjahideout.com/posts/a-guide-to-a-nginx-passenger-and-rvm-server I had hoped starting from scratch using this tutorial would work, but no dice. Either way, if you view the tutorial you can see what steps I have taken. Here is essentially what I have going on. I have a VPS account on linode.com Server OS is Ubuntu 10.04 Local OS (shouldn't matter, but just so you know) used to deploy with Capistrano is Snow Leopard 10.6.6 I use RVM on the server. Version is 1.2.2 I was previously on ruby-1.9.2-p0 [ i386 ], but per the tutorial listed above I switched to ree-1.8.7-2010.02 [ i386 ]. Running 'which ruby' from the command line verifies that I am using 1.8.7 with the following output: /usr/local/rvm/rubies/ree-1.8.7-2010.02/bin/ruby passenger -v prints the following: Phusion Passenger version 3.0.2 Running 'nginx -v' gives me a message that the command nginx could not be found. The server is definitely there and running as I can use nginx to serve static files, but this could have something to do with my problem. I have two users dealing with the install. root which I used to install everything, and deployer which is a user I created specifically to for deploying my applications My web app directory is in the deployer user's home directory as follows: /home/deployer/webapps/mysite.com/public Per Capistrano default deploy, a symbolic link called current is created in the public folder, and points to /home/deployer/webapps/mysite.com/public/releases/most_current_release I have chmodded the deployer directory recursively to 777 /opt/nginx permissions: rwxr-xr-x /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2 permissions: rwxrwsrwx My nginx config file has gone through just short of eternity variations, but currently looks like this: ================================================================================== worker_processes 1; events { worker_connections 1024; } http { passenger_root /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2; passenger_ruby /usr/local/rvm/bin/passenger_ruby; include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { # listen *:80; server_name mysite.com www.mysite.com; root /home/deployer/webapps/mysite.com/public/current; passenger_enabled on; passenger_friendly_error_pages on; access_log logs/mysite.com/server.log; error_log logs/mysite.com/error.log info; error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } } ================================================================================== I bounce nginx, hit the site, and boom. 403, and logs say directory index of /home/deployer... is forbidden As others with a similar problem have said, you can drop an index.html into the public/releases/current_release and it will render. But rails no worky. That's basically it. At this point I have just about completely exhausted every possible solution attempt I can think of. I am a programmer and definitely not a sysadmin, so I am 99% sure this has something to do with permissions that I have hosed, but for the life of me I just can't figure out where. If anyone can help I would really really appreciate it. If there's any specific permission things you want me to check (ie groups/permissions), can you please include the commands to do so as well. Hopefully this will help others in the future who read this post. Let me know if there is any other information I can provide, and thanks in advance!!!

  Read the article

• What *exactly* gets screwed when I kill -9 or pull the power?

  - by Mike

  Set-Up I've been a programmer for quite some time now but I'm still a bit fuzzy on deep, internal stuff. Now. I am well aware that it's not a good idea to either: kill -9 a process (bad) spontaneously pull the power plug on a running computer or server (worse) However, sometimes you just plain have to. Sometimes a process just won't respond no matter what you do, and sometimes a computer just won't respond, no matter what you do. Let's assume a system running Apache 2, MySQL 5, PHP 5, and Python 2.6.5 through mod_wsgi. Note: I'm most interested about Mac OS X here, but an answer that pertains to any UNIX system would help me out. My Concern Each time I have to do either one of these, especially the second, I'm very worried for a period of time that something has been broken. Some file somewhere could be corrupt -- who knows which file? There are over 1,000,000 files on the computer. I'm often using OS X, so I'll run a "Verify Disk" operation through the Disk Utility. It will report no problems, but I'm still concerned about this. What if some configuration file somewhere got screwed up. Or even worse, what if a binary file somewhere is corrupt. Or a script file somewhere is corrupt now. What if some hardware is damaged? What if I don't find out about it until next month, in a critical scenario, when the corruption or damage causes a catastrophe? Or, what if valuable data is already lost? My Hope My hope is that these concerns and worries are unfounded. After all, after doing this many times before, nothing truly bad has happened yet. The worst is I've had to repair some MySQL tables, but I don't seem to have lost any data. But, if my worries are not unfounded, and real damage could happen in either situation 1 or 2, then my hope is that there is a way to detect it and prevent against it. My Question(s) Could this be because modern operating systems are designed to ensure that nothing is lost in these scenarios? Could this be because modern software is designed to ensure that nothing lost? What about modern hardware design? What measures are in place when you pull the power plug? My question is, for both of these scenarios, what exactly can go wrong, and what steps should be taken to fix it? I'm under the impression that one thing that can go wrong is some programs might not have flushed their data to the disk, so any highly recent data that was supposed to be written to the disk (say, a few seconds before the power pull) might be lost. But what about beyond that? And can this very issue of 5-second data loss screw up a system? What about corruption of random files hiding somewhere in the huge forest of files on my hard drives? What about hardware damage? What Would Help Me Most Detailed descriptions about what goes on internally when you either kill -9 a process or pull the power on the whole system. (it seems instant, but can someone slow it down for me?) Explanations of all things that could go wrong in these scenarios, along with (rough of course) probabilities (i.e., this is very unlikely, but this is likely)... Descriptions of measures in place in modern hardware, operating systems, and software, to prevent damage or corruption when these scenarios occur. (to comfort me) Instructions for what to do after a kill -9 or a power pull, beyond "verifying the disk", in order to truly make sure nothing is corrupt or damaged somewhere on the drive. Measures that can be taken to fortify a computer setup so that if something has to be killed or the power has to be pulled, any potential damage is mitigated. Thanks so much!

  Read the article

• duplicate cache pages: Varnish

  - by Sukhjinder Singh

  Recently we have configured Varnish on our server, it was successfully setup but we noticed that if we open any page in multiple browsers, the Varnish send request to Apache not matter page is cached or not. If we refresh twice on each browser it creates duplicate copies of the same page. What exactly should happen: If any page is cached by Varnish, the subsequent request should be served from Varnish itself when we are opening the same page in browser OR we are opening that page from different IP address. Following is my default.vcl file backend default { .host = "127.0.0.1"; .port = "80"; } sub vcl_recv { if( req.url ~ "^/search/.*$") { }else { set req.url = regsub(req.url, "\?.*", ""); } if (req.restarts == 0) { if (req.http.x-forwarded-for) { set req.http.X-Forwarded-For = req.http.X-Forwarded-For + ", " + client.ip; } else { set req.http.X-Forwarded-For = client.ip; } } if (!req.backend.healthy) { unset req.http.Cookie; } set req.grace = 6h; if (req.url ~ "^/status\.php$" || req.url ~ "^/update\.php$" || req.url ~ "^/admin$" || req.url ~ "^/admin/.*$" || req.url ~ "^/flag/.*$" || req.url ~ "^.*/ajax/.*$" || req.url ~ "^.*/ahah/.*$") { return (pass); } if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset req.http.Cookie; } if (req.http.Cookie) { set req.http.Cookie = ";" + req.http.Cookie; set req.http.Cookie = regsuball(req.http.Cookie, "; +", ";"); set req.http.Cookie = regsuball(req.http.Cookie, ";(SESS[a-z0-9]+|SSESS[a-z0-9]+|NO_CACHE)=", "; \1="); set req.http.Cookie = regsuball(req.http.Cookie, ";[^ ][^;]*", ""); set req.http.Cookie = regsuball(req.http.Cookie, "^[; ]+|[; ]+$", ""); if (req.http.Cookie == "") { unset req.http.Cookie; } else { return (pass); } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") {return(pipe);} /* Non-RFC2616 or CONNECT which is weird. */ if (req.request != "GET" && req.request != "HEAD") { return (pass); } if (req.http.Accept-Encoding) { if (req.url ~ "\.(jpg|png|gif|gz|tgz|bz2|tbz|mp3|ogg)$") { # No point in compressing these remove req.http.Accept-Encoding; } else if (req.http.Accept-Encoding ~ "gzip") { set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { set req.http.Accept-Encoding = "deflate"; } else { # unknown algorithm remove req.http.Accept-Encoding; } } return (lookup); } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Varnish-Cache = "HIT"; } else { set resp.http.X-Varnish-Cache = "MISS"; } } sub vcl_fetch { if (beresp.status == 404 || beresp.status == 301 || beresp.status == 500) { set beresp.ttl = 10m; } if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset beresp.http.set-cookie; } set beresp.grace = 6h; } sub vcl_hash { hash_data(req.url); if (req.http.host) { hash_data(req.http.host); } else { hash_data(server.ip); } return (hash); } sub vcl_pipe { set req.http.connection = "close"; } sub vcl_hit { if (req.request == "PURGE") {ban_url(req.url); error 200 "Purged";} if (!obj.ttl > 0s) {return(pass);} } sub vcl_miss { if (req.request == "PURGE") {error 200 "Not in cache";} }

  Read the article

• MySQL reserves too much RAM

  - by Buddy

  I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

  Read the article

• How do you re-mount an ext3 fs readwrite after it gets mounted readonly from a disk error?

  - by cagenut

  Its a relatively common problem when something goes wrong in a SAN for ext3 to detect the disk write errors and remount the filesystem read-only. Thats all well and good, only when the SAN is fixed I can't figure out how to re-re-mount the filesystem read-write without rebooting. Behold: [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] [root@localhost ~]# mount /dev/mapper/mpath0 /mnt/foo [root@localhost ~]# touch /mnt/foo/blah All good, now I yank the LUN out from under it. [root@localhost ~]# touch /mnt/foo/blah [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system [root@localhost ~]# tail /var/log/messages Mar 18 13:17:33 localhost multipathd: sdb: tur checker reports path is down Mar 18 13:17:34 localhost multipathd: sdc: tur checker reports path is down Mar 18 13:17:35 localhost kernel: Aborting journal on device dm-2. Mar 18 13:17:35 localhost kernel: Buffer I/O error on device dm-2, logical block 1545 Mar 18 13:17:35 localhost kernel: lost page write due to I/O error on dm-2 Mar 18 13:17:36 localhost kernel: ext3_abort called. Mar 18 13:17:36 localhost kernel: EXT3-fs error (device dm-2): ext3_journal_start_sb: Detected aborted journal Mar 18 13:17:36 localhost kernel: Remounting filesystem read-only It only thinks its read-only, in reality its not even there. [root@localhost ~]# multipath -ll sdb: checker msg is "tur checker reports path is down" sdc: checker msg is "tur checker reports path is down" mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdb 8:16 [failed][faulty] \_ 2:0:0:1 sdc 8:32 [failed][faulty] [root@localhost ~]# ll /mnt/foo/ ls: reading directory /mnt/foo/: Input/output error total 20 -rw-r--r-- 1 root root 0 Mar 18 13:11 bar How it still remembers that 'bar' file being there... mystery, but not important right now. Now I re-present the LUN: [root@localhost ~]# tail /var/log/messages Mar 18 13:23:58 localhost multipathd: sdb: tur checker reports path is up Mar 18 13:23:58 localhost multipathd: 8:16: reinstated Mar 18 13:23:58 localhost multipathd: mpath0: queue_if_no_path enabled Mar 18 13:23:58 localhost multipathd: mpath0: Recovered to normal mode Mar 18 13:23:58 localhost multipathd: mpath0: remaining active paths: 1 Mar 18 13:23:58 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:58 localhost multipathd: dm-2: devmap already registered Mar 18 13:23:59 localhost multipathd: sdc: tur checker reports path is up Mar 18 13:23:59 localhost multipathd: 8:32: reinstated Mar 18 13:23:59 localhost multipathd: mpath0: remaining active paths: 2 Mar 18 13:23:59 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:59 localhost multipathd: dm-2: devmap already registered [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][enabled] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] Great right? It says [rw] right there. Not so fast: [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system OK, doesn't do it automatically, I'll just give it a little push: [root@localhost ~]# mount -o remount /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only The hell you are: [root@localhost ~]# mount -o remount,rw /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only Noooooooooo. I have tried all sorts of different mount/tune2fs/dmsetup commands and I cannot figure out how to get it to un-flag the block device as write-protected. Rebooting will fix it, but I'd much rather do it on-line. An hour of googling has gotten me nowhere either. Save me ServerFault.

  Read the article

• Windows 8.1 Update 1 Disk Usage 100%

  - by Gookjin Jeong

  Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

  Read the article

• Mysqld not starting due to apparent db corruption

  - by pitosalas

  I am very new at admining mysql, and bad for me, something caused the db to get clobbered. There are many error messages in the log that I am not sure how to safely proceed. Can you give some tips? Here's the log: 110107 15:07:15 mysqld started 110107 15:07:15 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 110107 15:07:15 InnoDB: Starting log scan based on checkpoint at InnoDB: log sequence number 35 515914826. InnoDB: Doing recovery: scanned up to log sequence number 35 515915839 InnoDB: 1 transaction(s) which must be rolled back or cleaned up InnoDB: in total 1 row operations to undo InnoDB: Trx id counter is 0 1697553664 110107 15:07:15 InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percents: 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 InnoDB: Apply batch completed InnoDB: Starting rollback of uncommitted transactions InnoDB: Rolling back trx with id 0 1697553198, 1 rows to undoInnoDB: Error: trying to access page number 3522914176 in space 0, InnoDB: space name ./ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10 110107 15:07:15InnoDB: Assertion failure in thread 3086403264 in file fil0fil.c line 3922 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/mysql/en/Forcing_recovery.html InnoDB: about forcing recovery. mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=0 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 217599 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffc55ac, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x8139eec 0x83721d5 0x833d897 0x833db71 0x832aa38 0x835f025 0x835f7a3 0x830a77e 0x8326b57 0x831c825 0x8317b8d 0x82a9e66 0x8315732 0x834fc9a 0x828d7c3 0x81c29dd 0x81b5620 0x813d9fe 0x40fdf3 0x80d5ff1 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://dev.mysql.com/doc/mysql/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. 110107 15:07:15 mysqld ended

  Read the article

• Hosed Windows 7 permissons

  - by Anthony

  Here is the most interesting thing I've noticed since the problems started: If I go into a control panel/system module (in this case the Resource Monitor) that has a "Check Online" type option, Firefox (my default browser) opens right up without a problem. But if I just start Firefox from any shortcuts (start menu, desktop, etc), the Firefox process starts up (and the start menu icon starts glowing) only to end without notice a few seconds later. Possibly related: If I start up in Safe-Mode (w/o Networking, but haven't tried with yet), I can start up FF or Chrome just fine, but if I attempt to open Chrome normally, I get a permissions error. Opera and Safari seem to be okay (mostly). Safari crashes when I try to download any files. All of the above leads me to believe that some (but clearly not all) core files have messed up permissions. Or rather, that I no longer have permission. System still does, based on Firefox opening without fail when the system initiates it. I've run MS Forefront once in normal mode, Malwarebytes twice in normal mode and once in safe-mode. One trojan found and deleted, but the problem persists. Two other things worth mentioning: I accidentally duplicated my library... I thought I'd try to add the "Internet" folder to my start menu, next to music and downloads. The first advanced thing I tried was "create new library". I clearly misunderstood what this means. I thought it was a way to add virtual folders to the library (which I thought, in turn, would allow me to choose it as a link on the start menu), but instead it recreated my already existing user folder, AppData and all. I didn't notice this until today. Then I tried setting permissions for my User folder to full control, recursively... Confused but not giving up,I thought I could maybe create a shortcut to the NetHood folder manually, but instead got hit with an access denied error. So I tried to change the permission levels for all sub-folders to my user folder so that I had full control. I got several access denied errors along the way. At this point I gave up, went out, ended up caught in the rain and stuck on a friend's couch and showing up late for work the next day. Thanks for nothing, Microsoft. When I finally got home today (20 hours later), I noticed that Firefox was acting really strange. I tried opening Chrome to see if the problem was client side or server side, and instead got the above-mentioned "you don't have permission to open this program" alert. And I think that's the whole story. Oh, I also did a system restore, but not chose a point from this morning (an auto update), and it worked but the problem wasn't fixed. And then all the earlier restore points were gone. So the questions are: a) is there a way to set the admin and user privs back to "default"? b) would this, in anyone's expert opinion, fix the problems I'm having? c) how come being logged in as an admin isn't the same as being logged in with admin privs? It seems that half the time I have to do run as admin for fairy standard things because i'm being treated as me-theuser and not me-theadmin. Thanks for reading.

  Read the article

• Issue in nginx proxying to apache

  - by Luis Masuelli

  My current nginx configuration is as follows: specific configuration for (currently two) domains: server { listen 443 ssl; server_name studiotv.service.tebusco.lan phpmyadmin.service.tebusco.lan; ssl_certificate /home/administrador/nginx-confs/ssl/service.tebusco.lan.crt; ssl_certificate_key /home/administrador/nginx-confs/ssl/service.tebusco.lan.key; location / { proxy_pass http://127.0.0.1:8180; proxy_set_header Host $http_host:8180; } } default configuration for unmatched ssl connections: server { listen 443 default ssl; ssl_certificate /home/administrador/nginx-confs/ssl/service.tebusco.lan.crt; ssl_certificate_key /home/administrador/nginx-confs/ssl/service.tebusco.lan.key; location / { return 403; } } http configuration: server { listen 80; rewrite ^ https://$host$request_uri? permanent; } The intention is clear: Redirect http traffic to https. Proxy each https:// call from phpmyadmin.service.tebusco.lan and studiotv.service.tebusco.lan to apache2. This includes passing a host header, which is detected. Each unmatched ssl connection must return a 403 in nginx. Does not even reach apache2. In the apache2 side of the life, I have a default site, and a non-default site which will match studiotv.service.tebusco.lan: 000-default.conf file (available and enabled): <VirtualHost 127.0.0.1:8180> # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. ServerName localhost ServerAdmin webmaster@localhost DocumentRoot /var/www/html <Directory /var/www/html> Order deny,allow Require all granted </Directory> </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet studiotv.conf file (available and enabled): <VirtualHost *:8180> ServerName studiotv.service.tebusco.lan ServerAdmin [email protected] DocumentRoot /var/www/studiotv <Directory /var/www/studiotv/> Options -Indexes +FollowSymLinks AllowOverride None Order deny,allow Allow from all Require all granted </Directory> # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn # No usamos ${APACHE_LOG_DIR} sino en su lugar /var/log/<host> ErrorLog /var/log/apache2/studiotv/error.log CustomLog /var/log/apache2/studiotv/access.log combined </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet However, when I hit the browser with http://studiotv.service.tebusco.lan, the default php page is shown instead. Question: What am I missing? (apache 2.4.7, nginx 1.6.0, ubuntu server 14.04).

  Read the article

• Network update solutions for a company of ~20 (5 local, 15 remote)?

  - by Margaret

  Hi all This is probably going to be a bit up in the air, because we're still in the "reaching towards solutions" phase, but I figured I'd see what you guys had to say. Plus I honestly know very little about systems and what is good and bad pratice. My organisation has always more or less worked on the concept of local machines; since it primarily employed contractors who were working from home, each of those people was largely responsible for their own machine and backup procedures and the like. We're now expanding, though we're still reasonably small (we're up to about 20 staff members). Most people still work remotely, but we have a central office where about five people are working. But we're getting large enough that we're starting to think it would be a good idea to have a central file server, and things like that - if someone gets hit by a bus, we want someone else to know where to look for the files to continue their work. A lot of the people who work for us remotely work on projects for other companies as well, so I don't want to force them to log in to our server whenever they're on a network. But I do want to make connection to be as painless as possible to do so, to improve utilisation. The other thing is that we're getting more people who would like to remote into the office server and do their work there. Our current remote connection application is an SSH install that allows people access to the network; the problem is, it's a black box to me, and I've never understood how to even connect to it (despite supposedly being de facto sysadmin). Thus far I've been able to bounce questions about how to get it working to the guy who does know it well, but he's leaving the company soon. So we probably need a solution for this that I actually understand. We were knocking around the idea of implementing a VPN with some form of remote desktop, and someone mentioned that this was largely a matter of purchasing a router capable of it; I'm not sure of the truth of that statement. This is what we have in the office: Two shiny new i7 servers, each running Windows Server 2008. Precise eventual layout is still being debated, a little, but the current suggestion is that one is primary database crunching, while the other is a warm backup of the databases, along with running Reporting Services. They currently have SQL Server 2008 installed on them, which is being connected to via the 'sa' account. We're hoping to make each person use their own account (preferably one tied to the 'central' password we set up, so we can use Windows Authentication). An older server, running XP Pro, that we are currently using as a test bed for a project that requires access to older versions of software. This machine is also being used to take backups, but I'm thinking of moving that functionality elsewhere. A spare desktop from a guy who left the company (XP Pro). We're thinking of bumping up the hard disk space and using it as the magical file server that's going to solve one particular everything. Assorted desktops, laptops, etc, at least one for each person in the office (mix of Win XP and Win 7; occasionally a person who normally works remotely might drop in to the office and bring a laptop bearing Vista, but it's pretty rare). All are set up as local user accounts at the moment; I don't know if it's the best arrangement. Purchasing more hardware is not a big problem, but we figure we might as well make use of what we've got first. Is Active Directory a big magic wand that's going to solve all the world's problems? Is there some other arrangement we should be looking to instead?

  Read the article

• Distributed and/or Parallel SSIS processing

  - by Jeff

  Background: Our company hosts SaaS DSS applications, where clients provide us data Daily and/or Weekly, which we process & merge into their existing database. During business hours, load in the servers are pretty minimal as it's mostly users running simple pre-defined queries via the website, or running drill-through reports that mostly hit the SSAS OLAP cube. I manage the IT Operations Team, and so far this has presented an interesting "scaling" issue for us. For our daily-refreshed clients, the server is only "busy" for about 4-6 hrs at night. For our weekly-refresh clients, the server is only "busy" for maybe 8-10 hrs per week! We've done our best to use some simple methods of distributing the load by spreading the daily clients evenly among the servers such that we're not trying to process daily clients back-to-back over night. But long-term this scaling strategy creates two notable issues. First, it's going to consume a pretty immense amount of hardware that sits idle for large periods of time. Second, it takes significant Production Support over-head to basically "schedule" the ETL such that they don't over-lap, and move clients/schedules around if they out-grow the resources on a particular server or allocated time-slot. As the title would imply, one option we've tried is running multiple SSIS packages in parallel, but in most cases this has yielded VERY inconsistent results. The most common failures are DTExec, SQL, and SSAS fighting for physical memory and throwing out-of-memory errors, and ETLs running 3,4,5x longer than expected. So from my practical experience thus far, it seems like running multiple ETL packages on the same hardware isn't a good idea, but I can't be the first person that doesn't want to scale multiple ETLs around manual scheduling, and sequential processing. One option we've considered is virtualizing the servers, which obviously doesn't give you any additional resources, but moves the resource contention onto the hypervisor, which (from my experience) seems to manage simultaneous CPU/RAM/Disk I/O a little more gracefully than letting DTExec, SQL, and SSAS battle it out within Windows. Question to the forum: So my question to the forum is, are we missing something obvious here? Are there tools out there that can help manage running multiple SSIS packages on the same hardware? Would it be more "efficient" in terms of parallel execution if instead of running DTExec, SQL, and SSAS same machine (with every machine running that configuration), we run in pairs of three machines with SSIS running on one machine, SQL on another, and SSAS on a third? Obviously that would only make sense if we could process more than the three ETL we were able to process on the machine independently. Another option we've considered is completely re-architecting our SSIS package to have one "master" package for all clients that attempts to intelligently chose a server based off how "busy" it already is in terms of CPU/Memory/Disk utilization, but that would be a herculean effort, and seems like we're trying to reinvent something that you would think someone would sell (although I haven't had any luck finding it). So in summary, are we missing an obvious solution for this, and does anyone know if any tools (for free or for purchase, doesn't matter) that facilitate running multiple SSIS ETL packages in parallel and on multiple servers? (What I would call a "queue & node based" system, but that's not an official term). Ultimately VMWare's Distributed Resource Scheduler addresses this as you simply run a consistent number of clients per VM that you know will never conflict scheduleing-wise, then leave it up to VMWare to move the VMs around to balance out hardware usage. I'm definitely not against using VMWare to do this, but since we're a 100% Microsoft app stack, it seems like -someone- out there would have solved this problem at the application layer instead of the hypervisor layer by checking on resource utilization at the OS, SQL, SSAS levels. I'm open to ANY discussion on this, and remember no suggestion is too crazy or radical! :-) Right now, VMWare is the only option we've found to get away from "manually" balancing our resources, so any suggestions that leave us on a pure Microsoft stack would be great. Thanks guys, Jeff

  Read the article

• Log transport and aggregation at scale

  - by markdrayton

  How're you analysing log files from UNIX/Linux machines? We run several hundred servers which all generate their own log files, either directly or through syslog. I'm looking for a decent solution to aggregate these and pick out important events. This problem breaks down into 3 components: 1) Message transport The classic way is to use syslog to log messages to a remote host. This works fine for applications that log into syslog but less useful for apps that write to a local file. Solutions for this might include having the application log into a FIFO connected to a program to send the message using syslog, or by writing something that will grep the local files and send the output to the central syslog host. However, if we go to the trouble of writing tools to get messages into syslog would we be better replacing the whole lot with something like Facebook's Scribe which offers more flexibility and reliability than syslog? 2) Message aggregation Log entries seem to fall into one of two types: per-host and per-service. Per-host messages are those which occur on one machine; think disk failures or suspicious logins. Per-service messages occur on most or all of the hosts running a service. For instance, we want to know when Apache finds an SSI error but we don't want the same error from 100 machines. In all cases we only want to see one of each type of message: we don't want 10 messages saying the same disk has failed, and we don't want a message each time a broken SSI is hit. One approach to solving this is to aggregate multiple messages of the same type into one on each host, send the messages to a central server and then aggregate messages of the same kind into one overall event. SER can do this but it's awkward to use. Even after a couple of days of fiddling I had only rudimentary aggregations working and had to constantly look up the logic SER uses to correlate events. It's powerful but tricky stuff: I need something which my colleagues can pick up and use in the shortest possible time. SER rules don't meet that requirement. 3) Generating alerts How do we tell our admins when something interesting happens? Mail the group inbox? Inject into Nagios? So, how're you solving this problem? I don't expect an answer on a plate; I can work out the details myself but some high-level discussion on what is surely a common problem would be great. At the moment we're using a mishmash of cron jobs, syslog and who knows what else to find events. This isn't extensible, maintainable or flexible and as such we miss a lot of stuff we shouldn't. Updated: we're already using Nagios for monitoring which is great for detected down hosts/testing services/etc but less useful for scraping log files. I know there are log plugins for Nagios but I'm interested in something more scalable and hierarchical than per-host alerts.

  Read the article

• MySQL crash. Unknown cause. Signal 11

  - by fortmac

  This is a database that I installed ~6 months ago and had been running fine. This is currently running in Ubuntu 12.04. Attempting to connect to MySQL causes this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) Then theres: $ sudo mysqld which returns: 130702 15:38:54 [Note] Plugin 'FEDERATED' is disabled. 130702 15:38:54 InnoDB: The InnoDB memory heap is disabled 130702 15:38:54 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130702 15:38:54 InnoDB: Compressed tables use zlib 1.2.3.4 130702 15:38:54 InnoDB: Initializing buffer pool, size = 128.0M 130702 15:38:54 InnoDB: Completed initialization of buffer pool 130702 15:38:54 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 130702 15:38:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 130702 15:38:55 InnoDB: Waiting for the background threads to start 130702 15:38:56 InnoDB: 1.1.8 started; log sequence number 5201901917 130702 15:38:56 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130702 15:38:56 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130702 15:38:56 [Note] Server socket created on IP: '127.0.0.1'. 130702 15:38:56 [Note] Event Scheduler: Loaded 0 events 130702 15:38:56 [Note] mysqld: ready for connections. Version: '5.5.28-0ubuntu0.12.04.3' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 19:39:02 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346681 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f9509e51530 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f94f1d3de60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f95083427b9] mysqld(handle_fatal_signal+0x483)[0x7f9508209b43] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f9506f5bcb0] mysqld(+0x320e1c)[0x7f9508113e1c] mysqld(_ZN4JOIN15alloc_func_listEv+0x9c)[0x7f950812391c] mysqld(_ZN4JOIN7prepareEPPP4ItemP10TABLE_LISTjS1_jP8st_orderS7_S1_S7_P13st_select_lexP18st_select_lex_unit+0x918)[0x7f9508124658] mysqld(_Z12mysql_selectP3THDPPP4ItemP10TABLE_LISTjR4ListIS1_ES2_jP8st_orderSB_S2_SB_yP13select_resultP18st_select_lex_unitP13st_select_lex+0x130)[0x7f950812d060] mysqld(_Z13handle_selectP3THDP3LEXP13select_resultm+0x17c)[0x7f9508132fbc] mysqld(+0x2f6714)[0x7f95080e9714] mysqld(_Z21mysql_execute_commandP3THD+0x16d8)[0x7f95080f1178] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f95080f5e0f] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1380)[0x7f95080f7260] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f950819b80d] mysqld(handle_one_connection+0x50)[0x7f950819b870] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f9506f53e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f9506684cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f94e0004b80): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. I'm at a loss. What other reports would be useful in diagnosing this? /var/log/mysql.err & /var/log/mysql.log are empty.

  Read the article

• What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

  - by Tegeril

  Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

  Read the article

• WPF: Setting DataContext of a UserControl with Binding not working in XAML

  - by Grant Crofton

  Hi, I'm trying to get my first WPF app working using MVVM, and I've hit a little binding problem. The setup is that I have a view & viewModel which holds User details (the parent), and to try and keep things simple I've put a section of that view into a separate view & viewModel (the child). The child view is defined as a UserControl. The issue I'm having is how to set the DataContext of the child view (the UserControl). My parent ViewModel has a property which exposes the child ViewModel, like so: class ParentViewModel: INotifyPropertyChanged { public ChildViewModel childViewModel { get; set; } //... } In the XAML for my parent view (which has it's DataContext set to the ParentViewModel), I try to set the DataContext of the child view as follows: <views:ChildView x:Name="ChildView" DataContext="{Binding childViewModel}"/> However, this doesn't work. The DataContext of the child view is set to the same DataContext as the parent view (i.e. the ParentViewModel), as if I wasn't setting it at all. I also tried setting the DataContext in the child view itself, which also doesn't work: <UserControl x:Class="DietRecorder.Client.View.ChildView" DataContext="childViewModel" I have found a couple of ways around this. In the child view, I can bind everything by including the ChildViewModel in the path: <SomeControl Visibility="{Binding Path=childViewModel.IsVisible}"> but I don't want the child view to have this level of awareness of the hierarchy. Setting the DataContext in code also works - however, I have to do this after showing the parent view, otherwise the DataContext just gets overwritten when I call Show(): parentView.Show(); parentView.ChildView.DataContext = parentViewModel.childViewModel; This code also makes me feel uneasy, what with the LOD violation and all. It's just the DataContext that seems to be the problem - I can bind other things in the child, for example I tried binding the FontSize to an int property just to test it: <views:ChildView x:Name="ChildView" FontSize="{Binding Path=someVal}"/> And that works fine. But I'm sure binding the DataContext should work - I've seen similar examples of this kind of thing. Have I missed something obvious here? Is there a reason this won't work? Is there a spelling mistake somewhere? (I renamed things for your benefit so you won't be able to help me there anyway). Any thoughts welcome. Thanks, Grant

  Read the article

• WPF - ListView within listView Scrollbar problem

  - by Josh

  So I currently have a ListView "List A" who's items each have an expander control which contains another ListView "List B". The problem I am having is that sometimes List B grows so big that it extends beyond the range of List A's view area. List A's scroll bars do not pick up the fact that parts of List B are not being displayed. Is there a way to setup my xaml so that the scroll bars for List A will detect when the list inside the expander is longer then the viewing area of List A. Here is the section of code I need to modify: <TabItem Header="Finished"> <TabItem.Resources> <ResourceDictionary> <DataTemplate x:Key="EpisodeItem"> <DockPanel Margin="30,3"> <TextBlock Text="{Binding Title}" DockPanel.Dock="Left" /> <WrapPanel Margin="10,0" DockPanel.Dock="Right"> <TextBlock Text="Finished at: " /> <TextBlock Text="{Binding TimeAdded}" /> </WrapPanel> </DockPanel> </DataTemplate> <DataTemplate x:Key="AnimeItem"> <DockPanel Margin="5,10"> <Image Height="75" Width="Auto" Source="{Binding ImagePath}" DockPanel.Dock="Left" VerticalAlignment="Top"/> <Expander Template="{StaticResource AnimeExpanderControlTemplate}" > <Expander.Header> <TextBlock FontWeight="Bold" Text="{Binding AnimeTitle}" /> </Expander.Header> <ListView ItemsSource="{Binding Episodes}" ItemTemplate="{StaticResource EpisodeItem}" BorderThickness="0,0,0,0" /> </Expander> </DockPanel> </DataTemplate> </ResourceDictionary> </TabItem.Resources> <ListView Name="finishedView" ItemsSource="{Binding UploadedAnime, diagnostics:PresentationTraceSources.TraceLevel=High}" ItemTemplate="{StaticResource AnimeItem}" /> </TabItem> List A is the ListView with name "finishedView" and List B is the ListView with ItemSource "Episodes"

  Read the article

• Json.Net Issues: StackOverflowException is thrown when serialising circular dependent ISerializable object with ReferenceLoopHandling.Ignore

  - by keyr

  I have a legacy application that used binary serialisation to persist the data. Now we wanted to use Json.net 4.5 to serialise the data without much changes to the existing classes. Things were working nice till we hit a circular dependent class. Is there any workaround to solve this problem? Sample code as shown below [Serializable] class Department : ISerializable { public Employee Manager { get; set; } public string Name { get; set; } public Department() { } public Department( SerializationInfo info, StreamingContext context ) { Manager = ( Employee )info.GetValue( "Manager", typeof( Employee ) ); Name = ( string )info.GetValue( "Name", typeof( string ) ); } public void GetObjectData( SerializationInfo info, StreamingContext context ) { info.AddValue( "Manager", Manager ); info.AddValue( "Name", Name ); } } [Serializable] class Employee : ISerializable { [NonSerialized] //This does not work [XmlIgnore]//This does not work private Department mDepartment; public Department Department { get { return mDepartment; } set { mDepartment = value; } } public string Name { get; set; } public Employee() { } public Employee( SerializationInfo info, StreamingContext context ) { Department = ( Department )info.GetValue( "Department", typeof( Department ) ); Name = ( string )info.GetValue( "Name", typeof( string ) ); } public void GetObjectData( SerializationInfo info, StreamingContext context ) { info.AddValue( "Department", Department ); info.AddValue( "Name", Name ); } } And the test code Department department = new Department(); department.Name = "Dept1"; Employee emp1 = new Employee { Name = "Emp1", Department = department }; department.Manager = emp1; Employee emp2 = new Employee() { Name = "Emp2", Department = department }; IList<Employee> employees = new List<Employee>(); employees.Add( emp1 ); employees.Add( emp2 ); var memoryStream = new MemoryStream(); var formatter = new BinaryFormatter(); formatter.Serialize( memoryStream, employees ); memoryStream.Seek( 0, SeekOrigin.Begin ); IList<Employee> deserialisedEmployees = formatter.Deserialize( memoryStream ) as IList<Employee>; //Works nicely JsonSerializerSettings jsonSS= new JsonSerializerSettings(); jsonSS.TypeNameHandling = TypeNameHandling.Objects; jsonSS.TypeNameAssemblyFormat = FormatterAssemblyStyle.Full; jsonSS.Formatting = Formatting.Indented; jsonSS.ReferenceLoopHandling = ReferenceLoopHandling.Ignore; //This is not working!! //jsonSS.ReferenceLoopHandling = ReferenceLoopHandling.Serialize; //This is also not working!! jsonSS.PreserveReferencesHandling = PreserveReferencesHandling.All; string jsonAll = JsonConvert.SerializeObject( employees, jsonSS ); //Throws stackoverflow exception Edit1: The issue has been reported to Json (http://json.codeplex.com/workitem/23668)

  Read the article

• Oauth for Google API example using Python / Django

  - by DrDee

  Hi, I am trying to get Oauth working with the Google API using Python. I have tried different oauth libraries such as oauth, oauth2 and djanog-oauth but I cannot get it to work (including the provided examples). For debugging Oauth I use Google's Oauth Playground and I have studied the API and the Oauth documentation With some libraries I am struggling with getting a right signature, with other libraries I am struggling with converting the request token to an authorized token. What would really help me if someone can show me a working example for the Google API using one of the above-mentioned libraries. EDIT: My initial question did not lead to any answers so I have added my code. There are two possible causes of this code not working: 1) Google does not authorize my request token, but not quite sure how to detect this 2) THe signature for the access token is invalid but then I would like to know which oauth parameters Google is expecting as I am able to generate a proper signature in the first phase. This is written using oauth2.py and for Django hence the HttpResponseRedirect. REQUEST_TOKEN_URL = 'https://www.google.com/accounts/OAuthGetRequestToken' AUTHORIZATION_URL = 'https://www.google.com/accounts/OAuthAuthorizeToken' ACCESS_TOKEN_URL = 'https://www.google.com/accounts/OAuthGetAccessToken' CALLBACK = 'http://localhost:8000/mappr/mappr/oauth/' #will become real server when deployed OAUTH_CONSUMER_KEY = 'anonymous' OAUTH_CONSUMER_SECRET = 'anonymous' signature_method = oauth.SignatureMethod_HMAC_SHA1() consumer = oauth.Consumer(key=OAUTH_CONSUMER_KEY, secret=OAUTH_CONSUMER_SECRET) client = oauth.Client(consumer) request_token = oauth.Token('','') #hackish way to be able to access the token in different functions, I know this is bad, but I just want it to get working in the first place :) def authorize(request): if request.GET == {}: tokens = OAuthGetRequestToken() return HttpResponseRedirect(AUTHORIZATION_URL + '?' + tokens) elif request.GET['oauth_verifier'] != '': oauth_token = request.GET['oauth_token'] oauth_verifier = request.GET['oauth_verifier'] OAuthAuthorizeToken(oauth_token) OAuthGetAccessToken(oauth_token, oauth_verifier) #I need to add a Django return object but I am still debugging other phases. def OAuthGetRequestToken(): print '*** OUTPUT OAuthGetRequestToken ***' params = { 'oauth_consumer_key': OAUTH_CONSUMER_KEY, 'oauth_nonce': oauth.generate_nonce(), 'oauth_signature_method': 'HMAC-SHA1', 'oauth_timestamp': int(time.time()), #The timestamp should be expressed in number of seconds after January 1, 1970 00:00:00 GMT. 'scope': 'https://www.google.com/analytics/feeds/', 'oauth_callback': CALLBACK, 'oauth_version': '1.0' } # Sign the request. req = oauth.Request(method="GET", url=REQUEST_TOKEN_URL, parameters=params) req.sign_request(signature_method, consumer, None) tokens =client.request(req.to_url())[1] params = ConvertURLParamstoDictionary(tokens) request_token.key = params['oauth_token'] request_token.secret = params['oauth_token_secret'] return tokens def OAuthAuthorizeToken(oauth_token): print '*** OUTPUT OAuthAuthorizeToken ***' params ={ 'oauth_token' :oauth_token, 'hd': 'default' } req = oauth.Request(method="GET", url=AUTHORIZATION_URL, parameters=params) req.sign_request(signature_method, consumer, request_token) response =client.request(req.to_url()) print response #for debugging purposes def OAuthGetAccessToken(oauth_token, oauth_verifier): print '*** OUTPUT OAuthGetAccessToken ***' params = { 'oauth_consumer_key': OAUTH_CONSUMER_KEY, 'oauth_token': oauth_token, 'oauth_verifier': oauth_verifier, 'oauth_token_secret': request_token.secret, 'oauth_signature_method': 'HMAC-SHA1', 'oauth_timestamp': int(time.time()), 'oauth_nonce': oauth.generate_nonce(), 'oauth_version': '1.0', } req = oauth.Request(method="GET", url=ACCESS_TOKEN_URL, parameters=params) req.sign_request(signature_method, consumer, request_token) response =client.request(req.to_url()) print response return req def ConvertURLParamstoDictionary(tokens): params = {} tokens = tokens.split('&') for token in tokens: token = token.split('=') params[token[0]] = token[1] return params

  Read the article

• No mapping found for HTTP request with URI: in a Spring MVC app

  - by Ravi

  Hello All, I'm getting this error. my web.xml has this <servlet> <servlet-name>springweb</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <init-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/web-application-config.xml</param-value> </init-param> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>springweb</servlet-name> <url-pattern>/app/*</url-pattern> </servlet-mapping> I have this in my web-application-config.xml <bean id="viewResolver" class="org.springframework.web.servlet.view.UrlBasedViewResolver"> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView"/> </bean> <bean name="/Scheduling.htm" class="com.web.SchedulingController"/> my com.web.SchedulingController looks like this /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package com.web; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import org.springframework.web.servlet.ModelAndView; import org.springframework.web.servlet.mvc.Controller; public class SchedulingController implements Controller{ public ModelAndView handleRequest(HttpServletRequest request, HttpServletResponse response) throws Exception { ModelAndView modelAndView = new ModelAndView("/jsp/Scheduling_main.jsp"); modelAndView.addObject("message","Hello World MVC!!"); return modelAndView; } } When I hit this controller with the URL http://localhost:8080/project1/app/Scheduling.htm The Scheduling_main.jsp gets displayed but the images are not displayed properly. Also the js and css file are not getting rendered. I'm accessing the images like this <img src="jquerylib/images/save_32x32.png" title="Save Appointment"> If I change the URL mapping in the servlet definition to *.htm, the images get displayed fine. Can you point out where I'm missing out. Here is complete error message WARN [PageNotFound] No mapping found for HTTP request with URI [/mavenproject1/app/jquerylib/images/save_32x32.png] in DispatcherServlet with name 'springweb' Thanks a lot. Ravi

  Read the article

• WPF CommandParameter is NULL first time CanExecute is called

  - by Jonas Follesø

  I have run into an issue with WPF and Commands that are bound to a Button inside the DataTemplate of an ItemsControl. The scenario is quite straight forward. The ItemsControl is bound to a list of objects, and I want to be able to remove each object in the list by clicking a Button. The Button executes a Command, and the Command takes care of the deletion. The CommandParameter is bound to the Object I want to delete. That way I know what the user clicked. A user should only be able to delete their "own" objects - so I need to do some checks in the "CanExecute" call of the Command to verify that the user has the right permissions. The problem is that the parameter passed to CanExecute is NULL the first time it's called - so I can't run the logic to enable/disable the command. However, if I make it allways enabled, and then click the button to execute the command, the CommandParameter is passed in correctly. So that means that the binding against the CommandParameter is working. The XAML for the ItemsControl and the DataTemplate looks like this: <ItemsControl x:Name="commentsList" ItemsSource="{Binding Path=SharedDataItemPM.Comments}" Width="Auto" Height="Auto"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <Button Content="Delete" FontSize="10" Command="{Binding Path=DataContext.DeleteCommentCommand, ElementName=commentsList}" CommandParameter="{Binding}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> So as you can see I have a list of Comments objects. I want the CommandParameter of the DeleteCommentCommand to be bound to the Command object. So I guess my question is: have anyone experienced this problem before? CanExecute gets called on my Command, but the parameter is always NULL the first time - why is that? Update: I was able to narrow the problem down a little. I added an empty Debug ValueConverter so that I could output a message when the CommandParameter is data bound. Turns out the problem is that the CanExecute method is executed before the CommandParameter is bound to the button. I have tried to set the CommandParameter before the Command (like suggested) - but it still doesn't work. Any tips on how to control it. Update2: Is there any way to detect when the binding is "done", so that I can force re-evaluation of the command? Also - is it a problem that I have multiple Buttons (one for each item in the ItemsControl) that bind to the same instance of a Command-object? Update3: I have uploaded a reproduction of the bug to my SkyDrive: http://cid-1a08c11c407c0d8e.skydrive.live.com/self.aspx/Code%20samples/CommandParameterBinding.zip

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >