Search Results

Search found 1298 results on 52 pages for 'ssd'.

Page 38/52 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • NVRAM for journals on Linux?

    - by symcbean
    I've been thinking about ways of speeding up disk I/O, and one of the bottlenecks I keep coming back to is the journal. There's an obvious benefit to using an SSD for the journal - over and above just write caching unless of course I just disable the journal with the write cache (after all devicemapper doesn't seem to support barriers). In order to get the benefits from using a BB write cache on the controller, then I'd need to disable journalling - but then the OS should try to fsck the system after an outage. Of course if the OS knows what's in the batter-backed memory then it could use it as the journal - but that means it must be exposed as a block device and only be under the control of the operating system. However I've not been able to find a suitable low-cost device (no, write-levelling for Flash is not adequate for a journal, at least one which uses Smartmedia). While there's no end of flash devices, disk/array controllers with BB write caches, so far I've not found anything which just gives me non-volatile memory addressable as a block storage device.

    Read the article

  • Prevent Ultrabay HDD from ejecting on sleep

    - by Bryce Evans
    I have a lenovo T430s thinkpad with a small SSD primary drive and 500gb ultrabay drive. When I put the computer to sleep and then return, I get the message titled "problem ejecting < drive name " "Windows can't stop your 'Generic volume' device because a program is still using it." This pop up is very annoying every time every time I use the computer. I don't want to disable write caching [D:Hardware[drive]policiesquick removal] because I want best performance and never remove the drive. Any ways to avoid this pop up?

    Read the article

  • Disable or sleep secondary hard drive in Macbook

    - by cpak
    I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original hard drive to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the hard drive is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the hard drive when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it.

    Read the article

  • Eclipse: would more CPU cores with HyperThreading help increase speed?

    - by Dylan
    I'm programming a very large project in Eclipse. Right now I use a dual core machine with 2GB RAM, but Eclipse is sometimes busy for minutes (refreshing/indexing/building), so I'm upgrading to a new machine (with 16GB RAM and an SSD). Now I must choose between an Intel 2500K or an Intel 2600K that has HyperThreading. The price difference is about $100. Would that be worth it, for Eclipse, or is more memory/faster drive much more important for Eclipse ? Can Eclipse make use of the HyperThreading at all?

    Read the article

  • Click sound from computer when shut down

    - by user32569
    Hi, I build my new computer yesterday and I noticed, when computer is shut down, I mean the exact time its looses power from PSU, relativelly loud CLICK sound occurs. Please does anyone knows from where? I think MB, SSD, VGA, CPU nor coolers are not cousing this. I would guess maybe Samsung 1TB HDD (maybe when heads go back to LZ) or some hard safety switch or relay in PSU? Or just the MB speaker? (Yes, its actually installed). Do you have any experience with this? Thanks.

    Read the article

  • Suggestions for Troubleshooting WIndows 7 lockups

    - by Craig L
    I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

    Read the article

  • Hypertransport sync flood error

    - by Carl B
    What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

    Read the article

  • Can't double click files to open them in inDesign (CS5)

    - by Matt
    I cannot open a file unless I open inDesign (the program) and then do File-Open If I double click, it starts to open, then just hangs forever. AFTER I close it, and look in the directory where they're saved, I see a (temporary?) "lock" file. Now I can double click the original file and it opens just fine. However, now when I close iD it deletes the file and the whole process starts again... I have tried updating the software, uninstalled COMPLETELY and reinstalled, tried a brand new Win7 install. These files are all saved on a network drive, the computer is a new quad-core Dell with 12GB of RAM and a fresh x64 Win7 install on the SSD. Does not happen with other programs.

    Read the article

  • Intel Rapid Storage Technology service always crashes

    - by Massimo
    I'm running Windows 7 x64 on a system based on an Asus Z87-Deluxe motherboard; the storage is configured for RAID mode; there is a single SSD drive for the O.S. and two 4-TB disks in a RAID 1 setup for the data. I've installed the latest version of Intel's Rapid Storage Technology drivers, 12.8.0.1016. The program complains about its service not being running, and the service is actually stopped; if I try to start it, it crashes. I've already tried reinstalling the package, but nothing changed. All the disks work correctly, but the RST program is unusable. How can I fix this?

    Read the article

  • Clicking hyperlinks in Email messages becomes painfully slow

    - by Joel Spolsky
    Running Windows 7 (RC, 64 bit). Suddenly, today, after months without a problem, clicking on links has become extremely slow. I've noticed this in two places. (1) clicking hyperlinks in Outlook email messages, which launches Firefox, takes around a minute. Launching Firefox by itself is instantaneous - I have an SSD drive and a very fast CPU. (2) opening Word documents attached to Outlook email messages also takes a surprisingly long time. The only thing these two might have in common is that they use the DDE mechanism, if I'm not mistaken, to send a DDE open command to the application. Under Windows XP this problem could sometimes be fixed by unchecking the "Use DDE" checkbox in the file type mapping, however, I can't find any equivalent under Windows 7. See here for someone else having what I believe is the same problem. See here for more evidence that it's DDE being super-super-slow.

    Read the article

  • How to install Windows7 on Hitachi HTS545050a7e380 harddrive?

    - by wurlog
    I have a Samsung NP530U3B with a Hitachi HTS545050a7e380 Harddrive. In the Bios it shows as one drive Hitachi hts545050a7e380 When I try to install Windows 7 it show 2 drives in the setup Drive 0 with 15 GB Drive 1 with 460 GB Guess it is a hybrid of SSD and normal harddrive, right? I tried to install it on the second drive, but after restarting it goes back into the beginning of the Windows 7 installation. The installation routine automatically activated a 100 MB partition on Drive 0. I guess for the bootmanager. Second try: Installation on the 15GB drive. The same. After reboot it wants to install win7 all over again. If I remove the USB Stick I get the message "Missing operation system" Any ideas?

    Read the article

  • Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

    - by Lloyd Watkin
    I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

    Read the article

  • CentOS default installation gave 60% disk space to tmpfs partition

    - by garconcn
    I installed a CentOS server which will be used for xen hypervisor. The server has two Intel(R) Xeon(R) CPU E5620 and 148G memory. The OS was installed on a 120G SSD drive. After the installation, I found that the tmpfs partition occupied about 60% of the drive. Even though I don't need much space for the OS, will there be any problem with 71G tmp partition? Thanks for any comment. [root@cloud ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 55G 1.1G 51G 3% / /dev/sda1 99M 13M 82M 14% /boot tmpfs 71G 0 71G 0% /dev/shm

    Read the article

  • Seasgate GoFlex NAS + Horrible Speed = Bad Experience

    - by Jon H
    I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

    Read the article

  • Is it safe to run an operating system from an USB flash drive?

    - by Georg
    I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

    Read the article

  • "This file can't be previewed because of an error in the Microsoft Word previewer."

    - by danielson
    The issue is: Outlook 2013 simply will not give a preview of Word (nor Excel) docs in attachments. Never had the issue with Outlook 2010. Using Outlook 2013 on Windows 7 64bit SSD with Word 2010. I did notice that "Microsoft Word" is not listed specifically in Trust Center attachment handling, could that be part of the problem? Excel, Visio, RTF and many more are there. Update: strange, search can be performed in Word attachments... but can't preview Word file. So, Outlook can 'see' Word docs but won't let us have that preview. For reference, here is a similar question I posted in the Microsoft Answers forum.

    Read the article

  • Software/FakeRAID: Windows 8 Disk Mirroring vs Intel Onboard

    - by Johnny W
    So Windows 8 is out and I have a new motherboard. I wish to create a RAID 1 coupling between two HDDs -- for storage purposes only (my OS is on an SSD) -- but I don't know which is the best route to take. My motherboard (Z77 chipset) comes with the age old Intel Fake RAID, but since I only wish to use my RAID for storage, I wondered if I might be better to use Windows 8 Disk Mirroring. Can anyone advise which is better? Or perhaps the pros and cons of each, if that's too contentious? I just can't see the benefit of FakeRAID. You can see my current setup here, if that might change things(?): Thanks!

    Read the article

  • HDD situation - what would be best - data and backup

    - by Sam Johnson
    I just installed W8 on an Intel 330 180 GB SSD. I have 3 1TB HDDs. 1 HDD will be external for backup. 2 HDDs are then available for my PC. I do not need 2 TB of storage, so I thought I'd set these up to be exact clones of one another, so that if one dies I have a backup in the computer to go along with my external. Is this a good set up? How best would this be accomplished? I've heard people suggest RAID but I've never done RAID, have no idea what it is, and have no idea how to set it up in my BIOS. Thanks in advance

    Read the article

  • Significant OS X Finder lag when listing directories/files

    - by Jack Sleight
    I'm experiencing some significant OS X finder lag, that seems to be purely an issue with Finder itself, and not the HD or any other part of OS X (I'll explain below). The lag only appears to be when listing directories/files, where I'm seeing up to twelve or so seconds of lag (the folder opens with a blank list and the spinner going in the bottom right). This happens with both the local SSD and network drives (connected via ethernet or wifi) Browsing both local and network drives in terminal and listing directories is instant I can actually browse files on my NAS from my phone over a 3G connection from the other side of the country faster than Finder can when connected to the local network (madness!) Can anyone help? Thanks.

    Read the article

  • Cannot boot from a hard drive

    - by Martin Melka
    I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

    Read the article

  • Can Windows 7 restore itself from image to a smaller HDD than original?

    - by Borek
    I've created a full system image using the built-in Win7 utility, it was from a 300GB drive but there is only about 50GB of data. I then swapped disks in my notebook, the new one being 80GB SSD and now when I boot to the system restore applet, go through all of the settings (finding the backed up image on a network share, confirming that I'm willing to repartition my disk etc.), I get this: The system image restore failed. No disk that can be used for recovering the system disk can be found. [Details] Is this because I'm trying to restore to a smaller disk? (Even though the data should fit without any problems, there being only 50GB of it.)

    Read the article

  • Disable or sleep secondary HDD in Macbook

    - by cpak
    I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

    Read the article

  • What kind of SATA interface is on a Thinkpad X120E?

    - by Jorge Castro
    I recently ordered a Thinkpad X120E with an AMD Fusion (Zacate) chipset. I am eyeballing an SSD for it, however newer SSDs are coming out with 6Gbps SATA interfaces. I doubt such a cheap laptop has 6Gbps SATA, but I'm debating waiting the a bit longer until the Intel 510 series come out, if anything to future proof myself by putting it in this laptop and then later on when I do upgrade to a laptop with 6Gbps SATA I'll be good to go. The hardware manual mentions that the motherboard is for a "AMD Fusion E-350" but the specifications of each hardware part isn't part of the manual. Does anyone have any information on the kind of SATA controllers in Fusion laptops so I can make a better purchasing decision?

    Read the article

  • What happens to a Windows Dynamic Drive

    - by GruffTech
    In my windows (Windows 7) I have two primary logical volumns, One is on a SSD harddrive for my operating system and installed software, and my other is a Dynamic volume for my stored media. (I do alot of work with HD footage) I have all my media on the original DV tapes for backup purposes, just having them all available on my harddrive at all times is a major convience for me, well worth the few hundred dollar investment those 2TB drives were. Anyway, Long story short is my windows install has become problematic and I want to reformat windows. Does this, or will this effect my dynamic drive in any way? I've got almost 3 TB of video on there and i really dont want to re-import all my DV tapes.

    Read the article

  • What do I need to connect a hard disk to my laptop via non powered eSata?

    - by Ludo
    Hi there. I'm looking at getting a hard disk for my laptop (OCZ Vertex 2 SSD) which I would like to connect via eSata. My laptop has an eSata port, but it's not powered (Thinkpad T410). I presume this means I need more than just an eSata to eSata cable as it needs power, so does this mean I need a caddy for the hard disk as well which will provide power to the drive, or do I need one of them eSata cables that has a USB attachment too? I don't think the drive will come with a power supply. I realise this seems simple but I can't find an obvious answer online. Thanks for any assistance! Ludo.

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >