Search Results

Search found 3312 results on 133 pages for 'freebsd ports'.

Page 39/133 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Recommendation for Ethernet switches that allow arbitrary network topologies

  - by sblair

  We have the following requirements for three Ethernet switches that will be connected together: Allow the switches to connect together to form dynamic, arbitrary topologies, i.e., support for the RSTP is essential. Allow the physical topology (which ports are connected together) to be gleaned from the switches, e.g., using SNMP traps. This is optional, but would be very useful. At least 5 ports on each switch, but only 3 will be used for connecting the switches together. Be as compact as possible. Ideally be in stock, in the UK. Only 100Mb/s is required. (This question is the result of the lack of RSTP support from 3Com NJ225 devices, as described in my previous question.)

  Read the article

• Looking for a manual/how-to for installing a Canon iRunner 210s network printer

  - by Ssvarc

  A client has a Canon iRunner210S and is complaining about slow print speeds. I've searched for a install manual online but came up empty. A call to Canon technical referred me to their dealer network for service, as as informing me that there isn't a manual available on their website. Anyone know how to install these and/or have a link to a manual? The current setup has the printers on a LAN Manager printer port instead of on straight IP ports. Is this normal for this printer? And what exactly are Lan Manager ports (based on my research, they appear to be a way to authenticate a connection)?

  Read the article

• How to install a Canon iRunner 210s

  - by Ssvarc

  A client has a Canon iRunner210S and is complaining about slow print speeds. I've searched for a install manual online but came up empty. A call to Canon technical referred me to their dealer network for service, as as informing me that there isn't a manual available on their website. Anyone know how to install these and/or have a link to a manual? The current setup has the printers on a LAN Manager printer port instead of on straight IP ports. Is this normal for this printer? And what exactly are Lan Manager ports (based on my research, they appear to be a way to authenticate a connection)?

  Read the article

• Basic proxy with OpenSSH, Cygwin, Putty

  - by clang1234

  I know this is probably a common question, but after looking around for a few hours (on this site and others), I can't find a solution. I'm trying to set up a simple proxy. I already have a server running Windows Server 2008. I've installed Cygwin and have OpenSSH installed. I also have sshd (the openssh daemon) running. Port 22 is forwarded correctly. On my client side I have Putty on a Windows 7 machine. I can successfully open a connection to my server and log in to access the shell. So what do I do next? Do I just name the ports I want tunneled in Putty or do I need to tell my SSH server what to do with those ports? Thanks for the help. Let me know if I left anything out.

  Read the article

• Specify IPSEC port range using ipsec-tools

  - by Sandman4

  Is it possible to require IPSEC on a port range ? I want to require IPSEC for all incoming connections except a few public ports like 80 and 443, but don't want to restrict outgoing connections. My SPD rules would look like: spdadd 0.0.0.0/0 0.0.0.0/0[80] tcp -P in none; spdadd 0.0.0.0/0 0.0.0.0/0[443] tcp -P in none; spdadd 0.0.0.0/0 0.0.0.0/0[0....32767] tcp -P in esp/require/transport; In setkey manpage I see IP ranges, but no mention of port ranges. (The idea is to use IPSEC as a sort of VPN to protect internal communications between multiple servers. Instead of configuring permissions basing on source IPs, or configuring specific ports, I want to demand IPSEC on anything which is not meant to be public - I feel it's less error-prone this way.)

  Read the article

• Setting up a transparent SSL proxy

  - by badunk

  I've got a linux box set up with 2 network cards to inspect traffic going through port 80. One card is used to go out to the internet, the other one is hooked up to a networking switch. The point is to be able to inspect all HTTP and HTTPS traffic on devices hooked up to that switch for debugging purposes. I've written the following rules for iptables: nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.2.1:1337 -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 1337 -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On 192.168.2.1:1337, I've got a transparent http proxy using Charles (http://www.charlesproxy.com/) for recording. Everything's fine for port 80, but when I add similar rules for port 443 (SSL) pointing to port 1337, I get an error about invalid message through Charles. I've used SSL proxying on the same computer before with Charles (http://www.charlesproxy.com/documentation/proxying/ssl-proxying/), but have been unsuccessful with doing it transparently for some reason. Some resources I've googled say its not possible - I'm willing to accept that as an answer if someone can explain why. As a note, I have full access to the described set up including all the clients hooked up to the subnet - so I can accept self-signed certs by Charles. The solution doesn't have to be Charles-specific since in theory, any transparent proxy will do. Thanks! Edit: After playing with it a little, I was able to get it working for a specific host. When I modify my iptables to the following (and open 1338 in charles for reverse proxy): nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.2.1:1337 -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 1337 -A PREROUTING -i eth1 -p tcp -m tcp --dport 443 -j DNAT --to-destination 192.168.2.1:1338 -A PREROUTING -i eth1 -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 1338 -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE I am able to get a response, but with no destination host. In the reverse proxy, if I just specify that everything from 1338 goes to a specific host that I wanted to hit, it performs the hand shake properly and I can turn on SSL proxying to inspect the communication. The setup is less than ideal because I don't want to assume everything from 1338 goes to that host - any idea why the destination host is being stripped? Thanks again

  Read the article

• Route specific HTTP requests through pfSense OpenVPN

  - by DennisQ

  Hi, to start, I have very little knowledge on routes, iptables, etc. That said, here's what I'm trying to accomplish and where I think I'm stumped: Problem: We have an external website which we recently firewalled so it only accepts traffic from our office IP addresses. This works well at the office, but doesn't work for remote access through VPN as we don't route all traffic through OpenVPN. I would rather avoid forcing everyone to route all traffic through just to accommodate this one site. Environment: Main router box is running pfSense. Em0 is internal IP, Em1 is external. Internal net is 10.23.x and VPN is 10.0.8.0/24 I believe what I need to do is add a route to the VPN server config to send all traffic to that IP over the VPN tunnel. I think that part's working, but I don't get a response back, so I'm assuming that I need some NAT config on the VPN server to route the response back over the tunnel? What I've found so far is to try the following, but since this is a pfSense box on FreeBSD, I can't run iptables, etc. Make sure ip forwarding is enabled: echo 1 /proc/sys/net/ipv4/ip_forward Setup NAT back out: iptables -t nat -A POSTROUTING -s 10.0.8.0/24 -o em0 -j MASQUERADE Am I on the right path, and if so how do I accomplish this through pfSense UI or FreeBSD CLI? Thanks!

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• HP ProCurve GVRP Setup

  - by Matt

  I'm trying to setup GVRP on my 4 ProCurve switches. Currently I have a Layer 3 3500yl-24G (J8692A) which is connected to 3 Layer 2 2510G-48 (J9280A). I have three trunk ports setup on the 3500 connected to the 3 switches and currently everything seems to be working, the devices are talking to eachother and GVRP is pushing its configurations from the 3500 to the 3 other switches. My question is, once GVRP is setup, how exactly do I configure the ports on the 3 L2 switches to use the correct VLAN? I'm new to ProCurve network equipment and this is much easier to setup on Cisco equipment.

  Read the article

• Using the Juniper EX3300 Switch as a router?

  - by Richard Whitman

  I have a Juniper EX3300 switch in a data center. And I have connected one of the uplink ports (ge-0/1/0) to my ISP's router. I want to configure it so that all the devices connected to ports in the same VLAN as ge-0/1/0 can access the Internet. I have done some research, and I haven't gotten anywhere really. I have configured the interface as follows: ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family inet { address xx.xx.xx.xx/32; } } } where xx.xx.xx.xx is the "Customer Router Port IP" assigned by my ISP. When I try to commit, I get the following error: Interface ge-0/1/0.0 not enabled for switching Can some one tell me what is the right way to configure it?

  Read the article

• DSL Modem with Wireless Router

  - by David

  I have a D-Link WBR-1310 wireless router and a TP-Link TD-8616 DSL modem. My old DSL modem died recently and I got the TP-Link as a replacement. With my old DSL modem, I plugged it into the WAN port on my D-Link and I could reach the internet through wireless and through the network. However, when I plugged the new TP-Link into the WAN port, I was not able to get any internet connectivity (either on the network ports or through wireless). So I plugged my labtop directly into the TP-Link DSL modem and I was able to get internet connectivity. I'm trying to figure out why my labtop can see the internet connection, but not the D-Link router. I think that the problem is due to the IP networking. My D-Link was originally set to have IP address 192.168.1.1. According to the documentation for the TP-Link DSL modem, it uses 192.168.1.1 as its IP address. I do not believe that my old DSL modem had an IP address. I logged into my D-Link router and changed its IP address to 192.168.1.2 and restarted it. Unfortunately, I still could not see the internet from my wireless devices. I've read a few forum postings which implied that I needed to setup a "bridge" between the two networks. Does that sound correct? Why didn't my old DSL modem require a bridge? I read pg. 12-13 of my D-Link's manual and they suggest that I need to disable UPnP, DHCP, and then plug the DSL modem into one of the LAN ports on my router. I'm concerned about doing this since I don't think that the firewall will work if I plug my DSL modem into one of the LAN ports. I also have a home NAS on my network and I wouldn't want that to be available over the internet. Does anyone have any advice about how I can get my TPLink DSL modem to work with my D-Link router? Thanks!

  Read the article

• vagrant up command very slow on OS X Lion

  - by Andy Hume

  When I run vagrant up to provision a new VM on Lion it takes an extremely long time, during which the entire Mac is very laggy and unresponsive. The output is as follows, the key point being the "notice: Finished catalog run in 754.28 seconds" > vagrant up [default] Importing base box 'lucid64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.1.0 VirtualBox Version: 4.1.6 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- ssh: 22 => 2222 (adapter 1) [default] -- web: 80 => 4567 (adapter 1) [default] Creating shared folders metadata... [default] Running any VM customizations... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant [default] -- v-data: /var/www [default] -- manifests: /tmp/vagrant-puppet/manifests [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: /Stage[main]/Lucid64/Package[apache2]/ensure: ensure changed 'purged' to 'present' [default] [default] notice: /Stage[main]/Lucid64/File[/etc/motd]/ensure: defined content as '{md5}a25e31ba9b8489da9cd5751c447a1741' [default] [default] notice: Finished catalog run in 754.28 seconds [default] [default] err: /File[/var/lib/puppet/rrd]/ensure: change from absent to directory failed: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: change from absent to directory failed: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 2.05 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 1.36 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] >

  Read the article

• Windows 7 port Forwarding Issue

  - by Elliot

  I can't get port forwarding to work now that I am using windows 7 (64-bit). I am using a wireless connection (no wired connection available). I have the ports forwarded (IP has been double checked, router settings are confirmed), there is an exception for all of the programs in question in windows firewall, and in the resource monitor windows lists the ports as available, not restricted, and yet when I either use a specific program (ie utorrent, DC++, Command & Conquer 3) or check using firefox, the port reads as closed. How do I get the port forwarding to work?

  Read the article

• Good HDMI splitter/switch solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter/switch do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

• No communication on my VLAN?

  - by Donovan

  I am using a Netgear FSM7328S switch and have designated ports 19-24 as being part of VLAN # 3. I designated them all as untagged because I do not want them to switch traffic to any other port on the switch. I also removed them from the default, untagged, VLAN 1. My issue is that none of the ports 19-24 will communicate with eachother. My laptop plugged in with wireshark shows no switched traffic what so ever. Have I configured it wrong? Thanks, D

  Read the article

• Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

  - by GregC

  I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

  Read the article

• Windows 2008R2 blocks outbound LDAP for non-admins?

  - by Jon Bailey

  I've got a Windows 2008R2 terminal server with ~30 users on it. It's joined to a Samba-based domain. During the login script, we connect directly to the LDAP server to pull out certain profile information. This used to work just fine. Now, it doesn't, but only for non-local-admin accounts. Local admins work fine. As a non-local-admin: Connection to ports 389 or 636 just terminate (wireshark on the LDAP server reveals no connection attempt) Connection to other ports on the same server work fine Same thing on multiple LDAP servers Windows firewall is disabled Can't find any other rules/policies that may block this I suspect since this used to work, it came down during an update, but for the life of me, I can't find what. EDIT: I just ran Wireshark on the machine and didn't see anything when connecting to the LDAP server in question (or any LDAP server for that matter). I can, however, see traffic when I connect to that server on another port.

  Read the article

• ESXi and Networking Devices

  - by EsxiUser

  I have two intel pro 1000 pt nics. One quad and one dual port. I want to assign all nic ports to a VM. I enabled PCI passthrough on all devices but ESXi will only allow me to add two nic ports until it tells me the maximum number of pci devices have been added. I have also tried setting up a virtual switch but it didn't seem like this would give full access to the nics. What is the best way to setup the nics to the VM has direct access to them? This is for a firewall VM.

  Read the article

• ICMP - TTL - Trace Route

  - by dbasnett

  I asked this question at Stack Overflow and then thought this may be the better place to ask. Given the following situation: PC --- |aa RTR1 bb| --- |aa RTR2 bb| --- |aa RTR3 bb| etc Each of the |aa rtr bb| is meant to be a router with two ports aa and bb. My question is this. When you do a trace route from PC which router port address should respond with time to live exceeded in transit message? I seem to remember being taught to think of the router as being in as many parts as ports, so that in my scenario when aa is forwarding the packet to bb and decrements the ttl to 0, it will be the address of the aa port in the failure message. I am trying to find the definitive answer. Thanks.

  Read the article

• Good HDMI splitter solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

• Issue with Netgear GS108T Managed Switch and Jumbo Frames

  - by Richie086

  I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

  Read the article

• How to determine if a device is SATA driven and will be affect by the Sandy Bridge Intel Issue?

  - by joelhaus

  Looking to buy a higher-end Windows 7 laptop, but I'm concerned about the issue with the Intel Sandy Bridge chipset. Otherwise, my price range covers laptops within the latest (Sandy Bridge) generation of the Core i7 family. I understand that there is an issue with SATA ports 2-5 and I use a Windows Home Server over a WiFi connection to share files and backup my PC. The other storage devices that I will use (less frequently) are the built-in DVD-RW disc drive and various devices hooked up to the USB ports (i.e. Android devices, iPod, etc.). The question: Will this setup be negatively impacted by the problem Intel reported about Sandy Bridge? Given this information, is it unwise to purchase a laptop that has this flaw? I really don't know how to determine whether a device is SATA driven or not, so hoping someone can shed some light on this too. Thanks!

  Read the article

• Virtual COM for Mac OS

  - by TimothyP

  Hi, IS there a way to create virtual COM ports in Mac OS and connect them to eachother?

  Read the article

• Spanning-tree setup with incompatible switches

  - by wfaulk

  I have a set of eight HP ProCurve 2910al-48G Ethernet switches at my datacenter that are set up in a star topology with no physical loops. I want to partially mesh the switches for redundancy and manage the loops with a spanning-tree protocol. However, our connection to the datacenter is provided by two uplinks, each to a Cisco 3750. The datacenter's switches are handling the redundant connection using PVST spanning-tree, which is a Cisco-proprietary spanning-tree implementation that my HP switches do not support. It appears that my switches are not participating in the datacenter's spanning-tree domain, but are blindly passing the BPDUs between the two switchports on my side, which enables the datacenter's switches to recognize the loop and put one of the uplinks into the Blocking state. This is somewhat supposition, but I can confirm that, while my switches say that both of the uplink ports are forwarding, only one is passing any real quantity of data. (I am assuming that I cannot get the datacenter to move away from PVST. I don't know that I'd want them to make that significant of a change anyway.) The datacenter has also sent me this output from their switches (which I have expurgated of any identifiable info): 3750G-1#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 5 (GigabitEthernet1/0/5) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 0018.73d3.yyyy Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/5 Root FWD 4 128.5 P2p Gi1/0/6 Altn BLK 4 128.6 P2p Gi1/0/8 Altn BLK 4 128.8 P2p and: 3750G-2#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 6 (GigabitEthernet1/0/6) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 000f.f71e.zzzz Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/1 Desg FWD 4 128.1 P2p Gi1/0/5 Altn BLK 4 128.5 P2p Gi1/0/6 Root FWD 4 128.6 P2p Gi1/0/8 Desg FWD 4 128.8 P2p The uplinks to my switches are on Gi1/0/8 on both of their switches. The uplink ports are configured with a single tagged VLAN. I am also using a number of other tagged VLANs in my switch infrastructure. And, to be clear, I am passing the tagged VLAN I'm receiving from the datacenter to other ports on other switches in my infrastructure. My question is: how do I configure my switches so that I can use a spanning tree protocol inside my switch infrastructure without breaking the datacenter's spanning tree that I cannot participate in?

  Read the article

• Development Server Blocked Only from Home

  - by theonlylos

  Recently I've been having an issue with my CentOS 6 test server running Apache and Webmin running on port 10000 where when I try accessing any part of the server - SSH/FTP and even my domains (I have two - both keep getting timeout errors) when I try accessing from any computer on my home network. However when I access via tethering or via my office networks everything loads fine. While the firewall is the first issue at mind, my router never was set to block any special ports, and even after adding port 10000 as a specific exception I'm having no luck. Also, I doubt this is an IP blacklisting issue because I have websites on other servers using CloudFlare for security and I haven't gotten any warnings. Any assistance is greatly apprecaiated. UPDATE: Just some extra details about the issue: My ISP to my knowledge only blocks off ports 25 and 80 for residential users to prevent them from running web servers - however this issue has only come up a day or two ago, before that I was using the server successfully for months. Also the server is not physically located in any of my workspaces - it's a VPS housed in a datacenter

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >