Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 4/729 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• circumstances where software change leads to device damage

  - by nerorevenge

  Recently I changed a friend's OS from a really virus filled windows 7 to Ubuntu ..but kept changing os's because lsusb wouldn't detect the camera.But after coming back to windows, the camera wasn't detected, though I must point out the device driver for the camera was never found. The Sony 'technician' told me that that since the dev-manager of windows 7 couldn't detect the camera , irregardless of whether the device driver was installed, the software change must have damaged the hardware. I was wondering if there is any truth to it.

  Read the article

• Proper method to update and draw from game loop?

  - by Lost_Soul

  Recently I've took up the challenge for myself to create a basic 2d side scrolling monster truck game for my little brother. Which seems easy enough in theory. After working with XNA it seems strange jumping into Java (which is what I plan to program it in). Inside my game class I created a private class called GameLoop that extends from Runnable, then in the overridden run() method I made a while loop that handles time and such and I implemented a targetFPS for drawing as well. The loop looks like this: @Override public void run() { long fpsTime = 0; gameStart = System.currentTimeMillis(); lastTime = System.currentTimeMillis(); while(game.isGameRunning()) { currentTime = System.currentTimeMillis(); long ellapsedTime = currentTime - lastTime; if(mouseState.leftIsDown) { que.add(new Dot(mouseState.getPosition())); } entities.addAll(que); game.updateGame(ellapsedTime); fpsTime += ellapsedTime; if(fpsTime >= (1000 / targetedFPS)) { game.drawGame(ellapsedTime); } lastTime = currentTime; } The problem I've ran into is adding of entities after a click. I made a class that has another private class that extends MouseListener and MouseMotionListener then on changes I have it set a few booleans to tell me if the mouse is pressed or not which seems to work great but when I add the entity it throws a CME (Concurrent Modification Exception) sometimes. I have all the entities stored in a LinkedList so later I tried adding a que linkedlist where I later add the que to the normal list in the update loop. I think this would work fine if it was just the update method in the gameloop but with the repaint() method (called inside game.drawGame() method) it throws the CME. The only other thing is that I'm currently drawing directly from the overridden paintComponent() method in a custom class that extends JPanel. Maybe there is a better way to go about this? As well as fix my CME? Thanks in advance!!!

  Read the article

• question about select() and range of for loop to read sockets

  - by Fantastic Fourier

  Just a quick question about using select(). I'm using select() to read from multiple sockets. When I looked up examples on how to use select(), a lot of tutorials showed going through for loops and checking for FD_ISSET. The problem I have with those tutorials is that the for loop starts from i = 0. and checks if the bit has been set for the file descriptor i using FD_ISSET. Couldn't the for loop start from say your minfd (just like how you would keep track of maxfd)?? Or am I missing something?? Following link is an example of such for loop (look at the fourth example that he gives) http://www.developerweb.net/forum/showthread.php?t=2933 If that was the only example out there that used such for loop, I might understand it was a mistake or bad coding but I've seen several examples of such for loop of uselessly going through literally thousands of sockets and I'm convinced I'm missing something. Any comments or inputs are appreciated.

  Read the article

• In languages which create a new scope each time in a loop block, a new local copy of the local loop

  - by Jian Lin

  It seems that in language like C, Java, and Ruby (as opposed to Javascript), a new scope is created for each iteration of a loop block, and the local variable defined for the loop is actually made into a local variable every single time and recorded in this new scope? For example, in Ruby: p RUBY_VERSION $foo = [] (1..5).each do |i| $foo[i] = lambda { p i } end (1..5).each do |j| $foo[j].call() end the print out is: [MacBook01:~] $ ruby scope.rb "1.8.6" 1 2 3 4 5 [MacBook01:~] $ So, it looks like when a new scope is created, a new local copy of i is also created and recorded in this new scope, so that when the function is executed at a later time, the "i" is found in those scope chains as 1, 2, 3, 4, 5 respectively. Is this true? (It sounds like a heavy operation). Contrast that with p RUBY_VERSION $foo = [] i = 0 (1..5).each do |i| $foo[i] = lambda { p i } end (1..5).each do |j| $foo[j].call() end This time, the i is defined before entering the loop, so Ruby 1.8.6 will not put this i in the new scope created for the loop block, and therefore when the i is looked up in the scope chain, it always refer to the i that was in the outside scope, and give 5 every time: [MacBook01:~] $ ruby scope2.rb "1.8.6" 5 5 5 5 5 [MacBook01:~] $ I heard that in Ruby 1.9, i will be treated as a local defined for the loop even when there is an i defined earlier? The operation of creating a new scope, creating a new local copy of i each time through the loop seems heavy, as it seems it wouldn't have matter if we are not invoking the functions at a later time. So when the functions don't need to be invoked at a later time, could the interpreter and the compiler to C / Java try to optimize it so that there is not local copy of i each time?

  Read the article

• CMD For Loop does not hold set /a value

  - by Bob Hope

  Didn't know how to explain this well, so here is the code @echo off set test=0 for /f %%a in (textfile.txt) do ( rem loops five times(5 lines in textfile.txt) set /a test=test+1 rem Adds 1 to Test echo %%a rem Echo's correct line in file echo %test% rem Echo's whatever X was before the loop ) echo %test% rem Displays the correct value of X pause this is just an example of where I am finding the problem, txtfile.txt has 5 lines, so the for loop goes 5 times, each time, test gets +1 to it, and the /a displays the correct value of X, but the last echo on the for loop displays 0, which is what test is set to before the loop. The value of test is not changing until the loop is finished... is there any way to fix this? Here is what I want to accomplish, as there may be an easier way: I want to run a for loop that findstr's all rtf's in a series of sub folders, and copies them all to a all directory with a new name, 1.rtf,2.rtf,3.rtf, etc. The reason I need to rename them on the transfer is they all have the same name.

  Read the article

• How to disable Device mapper package from kickstart?

  - by MA1

  Can anyone tell me how to disable/exclude Device mapper package from kickstart file.

  Read the article

• distributed, fault-tolerant network block device

  - by gucki

  I'm looking for a distributed, fault-tolerant network storage system which exposes block devices (not filesystems) on the clients. A client's block device should write simultaneously to several storage nodes A client's block device should not fail as long as not all storage nodes backing it went down The master should automatically redistribute storages' data when a storage node fails or gets added/ removed A single master (which is for metadata only) is fine So ideally the architecture would be very similar to moosefs (http://www.moosefs.org/) but instead of exposing a real filesystem mounted using a fuse client it'd expose block devices on the clients. I know of iscsi and drbd but both don't seem to offer what I'm looking for. Or am I missing something?

  Read the article

• Unable to enumerate USB device

  - by takeshin

  Hello, My syslog is constantly filled with messages like this: Oct 16 11:48:35 my-laptop kernel: [61470.980078] hub 1-0:1.0: unable to enumerate USB device on port 2 Oct 16 11:48:35 my-laptop kernel: [61471.192079] hub 3-0:1.0: unable to enumerate USB device on port 2 The only USB device I use is Microsoft Natural Wireless Laser Mouse 7000. The laptop model is HP dv9500, Ubuntu 10.10, but the same was in the versions before. How can I fix this? Edit: Here's the output of sudo lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 045e:071d Microsoft Corp. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub All USB devices seems to be working fine. I have some problems with DVD-R and sound card, but they are not USB.

  Read the article

• One True Event Loop

  - by CyberShadow

  Simple programs that collect data from only one system need only one event loop. For example, Windows applications have the message loop, POSIX network programs usually have a select/epoll/etc. loop at their core, pure SDL games use SDL's event loop. But what if you need to collect events from several subsystems? Such as an SDL game which doesn't use SDL_net for networking. I can think of several solutions: Polling (ugh) Put each event loop in its own thread, and: Send messages to the main thread, which collects and processes the events, or Place the event-processing code of each thread in a critical section, so that the threads can wait for events asynchronously but process them synchronously Choose one subsystem for the main event loop, and pass events from other subsystems via that subsystem as custom messages (for example, the Windows message loop and custom messages, or a socket select() loop and passing events via a loopback connection). Option 2.1 is more interesting on platforms where message-passing is a well-developed threading primitive (e.g. in the D programming language), but 2.2 looks like the best option to me.

  Read the article

• Bash loop to move directories on a remote host via ssh

  - by I Forgot

  I'm trying to figure out a way to perform the following loop on a remote host via ssh. Basically it renames a series of directories to create a rotating backup. But it's local. I want it to work against directories on a remote host. while [ $n -gt 0 ]; do { src=$(($n-1)) dst=$n if [ -d /backup/$src ]; then { mv /backup/$src /backup/$dst; } fi; } ((n--)) done;

  Read the article

• How to help FGLRX detect a device

  - by user113416

  I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

  Read the article

• export block device over network without root

  - by dschatz

  I'm trying to export a file as a block device over the network. I do not have root access on the machine where the file exists. I do have root access on the machine(s) where I will mount the block device. I've seen ATA-Over-Ethernet and ISCSI but there don't seem to be any implementations which allow me to export the block without root at least (some even require kernel modules). Is there an implementation of either of these or some other protocol that doesn't require root? Perhaps I can tunnel ethernet over IP to do this?

  Read the article

• Why is an inverse loop faster than a normal loop (test included)

  - by Saif Bechan

  I have been running some small tests in PHP on loops. I do not know if my method is good. I have found that a inverse loop is faster than a normal loop. I have also found that a while-loop is faster than a for-loop. Setup <?php $counter = 10000000; $w=0;$x=0;$y=0;$z=0; $wstart=0;$xstart=0;$ystart=0;$zstart=0; $wend=0;$xend=0;$yend=0;$zend=0; $wstart = microtime(true); for($w=0; $w<$counter; $w++){ echo ''; } $wend = microtime(true); echo "normal for: " . ($wend - $wstart) . "<br />"; $xstart = microtime(true); for($x=$counter; $x>0; $x--){ echo ''; } $xend = microtime(true); echo "inverse for: " . ($xend - $xstart) . "<br />"; echo "<hr> normal - inverse: " . (($wend - $wstart) - ($xend - $xstart)) . "<hr>"; $ystart = microtime(true); $y=0; while($y<$counter){ echo ''; $y++; } $yend = microtime(true); echo "normal while: " . ($yend - $ystart) . "<br />"; $zstart = microtime(true); $z=$counter; while($z>0){ echo ''; $z--; } $zend = microtime(true); echo "inverse while: " . ($zend - $zstart) . "<br />"; echo "<hr> normal - inverse: " . (($yend - $ystart) - ($zend - $zstart)) . "<hr>"; echo "<hr> inverse for - inverse while: " . (($xend - $xstart) - ($zend - $zstart)) . "<hr>"; ?> Average Results The difference in for-loop normal for: 1.0908501148224 inverse for: 1.0212800502777 normal - inverse: 0.069570064544678 The difference in while-loop normal while: 1.0395669937134 inverse while: 0.99321985244751 normal - inverse: 0.046347141265869 The difference in for-loop and while-loop inverse for - inverse while: 0.0280601978302 Questions My question is can someone explain these differences in results? And is my method of benchmarking been correct?

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• retrieving detailed usb midi device information on windows xp

  - by user557353

  The function midiOutGetDevCaps returns a structure MIDIOUTCAPS. I'd need more specific information when querying a usb midi device on windows xp, in particular I'd need the information displayed under "Location" when opening the respective device using the Device Manager. I need this information in order to programmatically distinguish between several MIDI Interfaces connected to a computer. Using midiOutGetDevCaps, I uniformly get "USB Audio Device" for every midi usb interface connected to the computer, so distinguishing between the interfaces is impossible.

  Read the article

• Computer loop restarts on Windows loading

  - by Robinson G.

  My computer restarts, just after or during Windows loading (4 squares getting together), or after some time on the desktop IF I'm idle. In order to start the computer I either have to swap my RAM (24Go) in differents DIMM slots, for example (I have 4 slots) : 1-2-4 or 2-3-4 or 1-3-4, not the same position each boot or it restarts in a loop... I can also change the ram timing from 1.5 to 1.6V and it starts, at the next reboot I have to change it again to 1.5 or it won't boot... And If after all, I succeed to boot, I have to use the computer for about 10 minutes, and it's ok, if I don't, it restarts by itself after some minutes. If I stay on the BIOS, It's all OK, I can stay for a whole year without restarting. I have check my RAM on Memtest (4*8G SDRAM DDR3) : OK I have check without graphic card : Still the same. I tried to reset the bios stack by getting it off and on : Still the same. I tried to reset my BIOS, and many settings about the RAM in the menu : Still the same. CPU temps are just fine (around 35°C) I was thinking ofc about the motherboard but I want to be sure. Motherboard : MSI zh77a-g43 RAM : 4*8G Dual Mode or not (depends on the number I put ofc.) PSU : 600W (enough to run all the config) CPU : i7 3770 non K

  Read the article

• Device Emulator not recognized in windows when I press cradle

  - by JasperT

  Hi Experts, Who can help me with this: I am working on Win7 x64, with VS.net 2008. I am developping for pocketpc. When my application is deployed to the device emulator it can't connect to my computer / db server. Both de emulator as well the mobile device center are configured to use DMA. When I cradle the device using device manager, nothing happens. What can I try? Greets, Jasper

  Read the article

• WinXP: Error 1167 -- Device (LPT1) not connected

  - by Thomas Matthews

  I am writing a program that opens LPT1 and writes a value to it. The WriteFile function is returning an error code of 1167, "The device is not connected". The Device Manager shows that LPT1 is present. I have a cable connected between a development board and the PC. The cable converts JTAG pin signals to signals on the parallel port. Power is applied and the cable is connected between the development board and the PC. The development board is powered on. I am using: Windows XP MS Visual Studio 2008, C language, console application, debug environment. Here is the relevant code fragments: HANDLE parallel_port_handle; void initializePort(void) { TCHAR * port_name = TEXT("LPT1:"); parallel_port_handle = CreateFile( port_name, GENERIC_READ | GENERIC_WRITE, 0, // must be opened with exclusive-access NULL, // default security attributes OPEN_EXISTING, // must use OPEN_EXISTING 0, // not overlapped I/O NULL // hTemplate must be NULL for comm devices ); if (parallel_port_handle == INVALID_HANDLE_VALUE) { // Handle the error. printf ("CreateFile failed with error %d.\n", GetLastError()); Pause(); exit(1); } return; } void writePort( unsigned char a_ucPins, unsigned char a_ucValue ) { DWORD dwResult; if ( a_ucValue ) { g_siIspPins = (unsigned char) (a_ucPins | g_siIspPins); } else { g_siIspPins = (unsigned char) (~a_ucPins & g_siIspPins); } /* This is a sample code for Windows/DOS without Windows Driver. */ // _outp( g_usOutPort, g_siIspPins ); //---------------------------------------------------------------------- // For Windows XP and later //---------------------------------------------------------------------- if(!WriteFile (parallel_port_handle, &g_siIspPins, 1, &dwResult, NULL)) { printf("Could not write to LPT1 (error %d)\n", GetLastError()); Pause(); return; } } If you believe this should be posted on Stack Overflow, please migrate it over (thanks).

  Read the article

• Android Device Chooser -- device not showing up

  - by mportiz08

  I'm using the android plugin for eclipse, and when I try to run my program using a real device through the android device chooser, my phone is not listed as a device. I have updated eclipse and all of the android packages, but it still isn't showing up. My phone is running 1.6, which is also the target version listed in the eclipse project. Also, the reason I decided to try testing on a real device is because the emulator doesn't seem to be working right anymore when I run my project. The emulator launches, but the program never does. Any ideas? (using windows 7/t-mobile mytouch 3g)

  Read the article

• How to fix the endless printing loop bug in Nevrona Rave

  - by Sean B. Durkin

  Nevrona Designs' Rave Reports is a Report Engine for use by Embarcadero's Delphi IDE. This is what I call the Rave Endless Loop bug. In Rave Reports version 6.5.0 (VCL10) that comes bundled with Delphi 2006, there is a nortorious bug that plagues many Rave report developers. If you have a non-empty dataset, and the data rows for this dataset fit exactly into a page (that is to say there are zero widow rows), then upon PrintPreview, Rave will get stuck in an infinite loop generating pages. This problem has been previously reported in this newsgroup under the following headings: "error: generating infinite pages"; Hugo Hiram 20/9/2006 8:44PM "Rave loop bug. Please help"; Tomas Lazar 11/07/2006 7:35PM "Loop on full page of data?"; Tony Chistiansen 23/12/2004 3:41PM reply to (3) by another complainant; Oliver Piche "Endless lopp print bug"; Richso 9/11/2004 4:44PM In each of these postings, there was no response from Nevrona, and no solution was reported. Possibly, the problem has also been reported on an allied newsgroup (nevrona.public.rave.reports.general), to wit: 6. "Continuously generating report"; Jobard 20/11/2005 Although it is not clear to me if (6) is the Rave Endless loop bug or another problem. This posting did get a reply from Nevrona, but it was more in relation to multiple regions ("There is a problem when using multiple regions that go over a page-break.") than the problem of zero widows.

  Read the article

• Is "map" a loop?

  - by DVK

  While answering this question, I came to realize that I was not sure whether Perl's map can be considered a loop or not? On one hand, it quacks/walks like a loop (does O(n) work, can be easily re-written by an equivalent loop, and sort of fits the common definition = "a sequence of instructions that is continually repeated"). On the other hand, map is not usually listed among Perl's control structures, of which loops are a subset of. E.g. http://en.wikipedia.org/wiki/Perl_control_structures#Loops So, what i'm looking for is a formal reason to be convinced of one side vs. the other. So far, the former (it is a loop) sounds a lot more convincing to me, but I'm bothered by the fact that I never saw "map" mentioned in a list of Perl loops.

  Read the article

• Asynchronous Request make for-Loop waiting for didFinishLoading

  - by rdesign

  Hey guys, I have a asynchronous url request within a for loop. This loop is called 20 times, each time one parameter of the webaddress is changed. Everytime the didFinishLoading method is called I want to hand over the data of this specific webadress. The problem now is that when I run the for loop, the didFinishLoading method is not called, only at the end. Any suggenstions on how to make the loop wait for complete loading the data for the specific URL? Thanks a lot.

  Read the article

• For loop with a non-integer increment in VB.NET

  - by Dan Tao

  Can a VB.NET For loop be constructed that mimics this C# code? TimeSpan oneDay = TimeSpan.FromDays(1.0); for (DateTime d = startDate; d < endDate; d += oneDay) { // some code } Obviously you could do it without a For loop (i.e., with a While); I'm just curious if there's a certain syntax to construct a VB.NET For loop with a non-integer increment that I'm not aware of.

  Read the article

• writing to a dataframe from a for-loop in R

  - by CCID

  I'm trying to write from a loop to a data frame in R, for example a loop like this for (i in 1:20) { print(c(i+i,i*i,i/1))} and to write each line of 3 values to a data frame with three columns, so that each iteration takes on a new row. I've tried using matrix, with ncol=3 and filled by rows, but only get the last item from the loop. Thanks.

  Read the article

• How to use Device Emulator to debug my WinCE application

  - by ame

  I am working with an MFC application built on a WinCE platform in Visual Studio. I need to debug this application and I cannot do it using KITL and the hardware. I tried to use Device Emulator for this: I started a new Platform Builder Project (PDA Device, enterprise webpad). I built it after ensureing that KITL was enabled and so was kernel debugger. Once built, i set the target connectivity options as ce device, download and transport set to Device Emulator and Debugger is KdStub. Once I hit Attach to Device, the doload to target window pops up and then the RelDir window also does. However nothing happens after this and in the output window it says: PB Debugger The Kernel Debugger is waiting to connect with target. Please guide me on what I need to do to debug my application. Thankyou!

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >