Search Results

Search found 32114 results on 1285 pages for 'general development'.

Page 412/1285 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

  • How to improve batching performance

    - by user4241
    Hello, I am developing a sprite based 2D game for mobile platform(s) and I'm using OpenGL (well, actually Irrlicht) to render graphics. First I implemented sprite rendering in a simple way: every game object is rendered as a quad with its own GPU draw call, meaning that if I had 200 game objects, I made 200 draw calls per frame. Of course this was a bad choice and my game was completely CPU bound because there is a little CPU overhead assosiacted in every GPU draw call. GPU stayed idle most of the time. Now, I thought I could improve performance by collecting objects into large batches and rendering these batches with only a few draw calls. I implemented batching (so that every game object sharing the same texture is rendered in same batch) and thought that my problems are gone... only to find out that my frame rate was even lower than before. Why? Well, I have 200 (or more) game objects, and they are updated 60 times per second. Every frame I have to recalculate new position (translation and rotation) for vertices in CPU (GPU on mobile platforms does not support instancing so I can't do it there), and doing this calculation 48000 per second (200*60*4 since every sprite has 4 vertices) simply seems to be too slow. What I could do to improve performance? All game objects are moving/rotating (almost) every frame so I really have to recalculate vertex positions. Only optimization that I could think of is a look-up table for rotations so that I wouldn't have to calculate them. Would point sprites help? Any nasty hacks? Anything else? Thanks.

    Read the article

  • Character progression through leveling, skills or items?

    - by Anton
    I'm working on a design for an RPG game, and I'm having some doubts about the skill and level system. I'm going for a more casual, explorative gaming experience and so thought about lowering the game complexity by simplifying character progression. But I'm having trouble deciding between the following: Progression through leveling, no complex skill progression, leveling increases base stats. Progression through skills, no leveling or base stat changes, skills progress through usage. Progression through items, more focus on stat-changing items, items confer skills, no leveling. However, I'm uncertain what the effects on gameplay might be in the end. So, my question is this: What would be the effects of choosing one of the above alternatives over the others? (Particularly with regards to the style and feel of the gameplay) My take on it is that the first sacrifices more frequent rewards and customization in favor of a simpler gameplay; the second sacrifices explicit customization and player control in favor of more frequent rewards and a somewhat simpler gameplay; while the third sacrifices inventory simplicity and a player metric in favor of player control, customization and progression simplicity. Addendum: I'm not really limiting myself to the above three, they are just the ones I liked most and am primarily interested in.

    Read the article

  • Affect movieclip scale from a .as doc to another

    - by Madcowe
    I've been working on a game following a tutorial on the internet, the game is an avoider where you have the Avatar, that has to avoid the objects that fall. The way it is made is: I have a DocumentClass which addChild's the screen you should be seeing and removeChild's the screen that you were. For example: first it loads the menuScreen, then when you press play unloads menu and loads playscreen. When you die it loads the gameoverScreen and loads the playscreen. And from the gameOverScreen you can press the SHOP button to go to the shop. From here on I'm on my own and not following any tutorials. The shop has a button that is supposed to alter the Avatar's X and Y scale to 0.5, but the problem is: how do I make that work? I tried creating a sharedObject.data.avatarSize, on the store's size button the code would be something like: sharedObject.data.avatarSize *= 0.5; And on the AvoiderGame.as, which is the most of the actual game, on the part where the avatar is created I tried putting this after it's creation: scaleX.avatar = sharedObject.data.avatarSize; scaleY.avatar = sharedObject.data.avatarSize; This did not work since it gives me the error 1009 saying can't access something that is null. I tried this before "using" the sharedObject: if( sharedObject.data.avatarSize == null ) { sharedObject.data.avatarSize = 1; } But it did not work... So now I'm not sure on what to do. I know we should reduce global variables as much as we can but how do I do it? Also, if it helps, I'm using Flash CS5 and working with AS3.0

    Read the article

  • Trade offs of linking versus skinning geometry

    - by Jeff
    What are the trade offs between inherent in linking geometry to a node versus using skinned geometry? Specifically: What capabilities do you gain / lose from using each method? What are the performance impacts of doing one over the other? What are the specific situations where you would want to do one over the other? In addition, do the answers to these questions tend to be engine specific? If so, how much?

    Read the article

  • Need help understanding XNA 4.0 BoundingBox vs BoundingSphere Intersection

    - by nerdherd
    I am new to both game programming and XNA, so I apologize if I'm missing a simple concept or something. I have created a simple 3D game with a player and a crate and I'm working on getting my collision detection working properly. Right now I am using a BoundingSphere for my player, and a BoundingBox for the crate. For some reason, XNA only detects a collision when my player's sphere touches the front face of the crate. I'm rendering all the BoundingSpheres and BoundingBoxes as wire frames so I can see what's going on, and everything visually appears to be correct, but I can't figure out this behavior. I have tried these checks: playerSphere.Intersects(crate.getBoundingBox()) playerSphere.Contains(crate.getBoundingBox(), ContainmentType.Intersects) playerSphere.Contains(crate.getBoundingBox()) != ContainmentType.Disjoint But they all seem to produce the same behavior (in other words, they are only true when I hit the front face of the crate). The interesting thing is that when I use a BoundingSphere for my crate the collision is detected as I would expect, but of course this makes the edges less accurate. Any thoughts or ideas? Have I missed something about how BoundingSpheres and BoundingBoxes compute their intersections? I'd be happy to post more code or screenshots to clarify if needed. Thanks!

    Read the article

  • Alchemy like game for the web, open source. Any ideas for element combinations?

    - by JohnDel
    I created a web game like the Android game Alchemy. It's open source and in the back-end you can create your own elements / your own game. I was wondering what elements - ideas would be good to implement as a prototype / demo? Some ideas are: Colors Programming languages Chemical Compounds Same as the original alchemy Evolution of biological organisms What do you think? Any specific combination ideas?

    Read the article

  • How do I draw a scene with 2 nested frames

    - by Guido Granobles
    I have been trying for long time to figure out this: I have loaded a model from a directx file (I am using opengl and Java) the model have a hierarchical system of nested reference frames (there are not bones). There are just 2 frames, one of them is called x3ds_Torso and it has a child frame called x3ds_Arm_01. Each one of them has a mesh. The thing is that I can't draw the arm connected to the body. Sometimes the body is in the center of the screen and the arm is at the top. Sometimes they are both in the center. I know that I have to multiply the matrix transformation of every frame by its parent frame starting from the top to the bottom and after that I have to multiply every vertex of every mesh by its final transformation matrix. So I have this: public void calculeFinalMatrixPosition(Bone boneParent, Bone bone) { System.out.println("-->" + bone.name); if (boneParent != null) { bone.matrixCombined = bone.matrixTransform.multiply(boneParent.matrixCombined); } else { bone.matrixCombined = bone.matrixTransform; } bone.matrixFinal = bone.matrixCombined; for (Bone childBone : bone.boneChilds) { calculeFinalMatrixPosition(bone, childBone); } } Then I have to multiply every vertex of the mesh: public void transformVertex(Bone bone) { for (Iterator<Mesh> iterator = meshes.iterator(); iterator.hasNext();) { Mesh mesh = iterator.next(); if (mesh.boneName.equals(bone.name)) { float[] vertex = new float[4]; double[] newVertex = new double[3]; if (mesh.skinnedVertexBuffer == null) { mesh.skinnedVertexBuffer = new FloatDataBuffer( mesh.numVertices, 3); } mesh.vertexBuffer.buffer.rewind(); while (mesh.vertexBuffer.buffer.hasRemaining()) { vertex[0] = mesh.vertexBuffer.buffer.get(); vertex[1] = mesh.vertexBuffer.buffer.get(); vertex[2] = mesh.vertexBuffer.buffer.get(); vertex[3] = 1; newVertex = bone.matrixFinal.transpose().multiply(vertex); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[0])); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[1])); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[2])); } mesh.vertexBuffer = new FloatDataBuffer( mesh.numVertices, 3); mesh.skinnedVertexBuffer.buffer.rewind(); mesh.vertexBuffer.buffer.put(mesh.skinnedVertexBuffer.buffer); } } for (Bone childBone : bone.boneChilds) { transformVertex(childBone); } } I know this is not the more efficient code but by now I just want to understand exactly how a hierarchical model is organized and how I can draw it on the screen. Thanks in advance for your help.

    Read the article

  • How do you author HDR content?

    - by Nathan Reed
    How do you make it easy for your artists to author content for an HDR renderer? What kinds of tools should you provide, and what workflows need to change, in going from LDR to HDR? Note that I'm not asking about the technical aspects of implementing an HDR renderer, but about best practices for creating materials and lighting in HDR. I've googled around a bit, but there doesn't seem to be much about this topic on the web. Can anyone point me to some good resources on this, or share their own experiences? Some specific points: Lighting - how can lighting artists pick HDR light colors? Do they have a standard LDR color picker and then a multiplier? Is the multiplier in gamma or linear space? Maybe instead of a multiplier it's a log-luminance? Or a physical brightness level, like the number of lumens? How will they know what multiplier/luminance/brightness is "correct" for a given light? Materials - how can texture artists make emissive color maps, such as neon signs, TV screens, skyboxes, etc? Can you paint one as a regular LDR (8-bit-per-channel) image and apply a multiplier (or log-luminance, etc.)? Are there cases where it's necessary to actually paint HDR images? If so, how do you go about this in Photoshop (or other software)?

    Read the article

  • Transform between two 3d cartesian coordinate systems

    - by Pris
    I'd like to know how to get the rotation matrix for the transformation from one cartesian coordinate system (X,Y,Z) to another one (X',Y',Z'). Both systems are defined with three orthogonal vectors as one would expect. No scaling or translation occurs. I'm using OpenSceneGraph and it offers a Matrix convenience class, if it makes finding the matrix easier: http://www.openscenegraph.org/documentation/OpenSceneGraphReferenceDocs/a00403.html.

    Read the article

  • Arbitrary Rotation about a Sphere

    - by Der
    I'm coding a mechanic which allows a user to move around the surface of a sphere. The position on the sphere is currently stored as theta and phi, where theta is the angle between the z-axis and the xz projection of the current position (i.e. rotation about the y axis), and phi is the angle from the y-axis to the position. I explained that poorly, but it is essentially theta = yaw, phi = pitch Vector3 position = new Vector3(0,0,1); position.X = (float)Math.Sin(phi) * (float)Math.Sin(theta); position.Y = (float)Math.Sin(phi) * (float)Math.Cos(theta); position.Z = (float)Math.Cos(phi); position *= r; I believe this is accurate, however I could be wrong. I need to be able to move in an arbitrary pseudo two dimensional direction around the surface of a sphere at the origin of world space with radius r. For example, holding W should move around the sphere in an upwards direction relative to the orientation of the player. I believe I should be using a Quaternion to represent the position/orientation on the sphere, but I can't think of the correct way of doing it. Spherical geometry is not my strong suit. Essentially, I need to fill the following block: public void Move(Direction dir) { switch (dir) { case Direction.Left: // update quaternion to rotate left break; case Direction.Right: // update quaternion to rotate right break; case Direction.Up: // update quaternion to rotate upward break; case Direction.Down: // update quaternion to rotate downward break; } }

    Read the article

  • Using idle time in turn-based (RPG) games for updating

    - by The Communist Duck
    If you take any turn based RPG game there will be large periods of time when nothing is happening because the game is looping over 'wait_for_player_input'. Naturally it seems sensible to use this time to update things. However, this immediately seems to suggest that it would need to be threaded. Is this sort of design possible in a single thread? loop: if not check_something_pressed: update_a_very_small_amount else keep going But if we says 'a_very_small_amount' is only updating a single object each loop, it's going to be very slow at updating. How would you go about this, preferably in a single thread? EDIT: I've tagged this language-agnostic as that seems the sensible thing, though anything more specific to Python would be great. ;-)

    Read the article

  • Alternative ways to make a battle system in a mobile indie game more fun and engaging

    - by Matt Beckman
    I'm developing an indie game for mobile platforms, and part of the game involves a PvP battle system (where the target player is passive). My vision is simple: the active player can select a weapon/item, then attack/use, and display the calculated outcome. I have a concept for battle modifiers that affect stats to make it more interesting, but I'm not convinced this by itself will add enough of a fun factor. I've received some inspiration from the game engine that powers Modern War/Kingdom Age/Crime City, but I want more control to make it more fun. In those games, you don't have the option to select weapons or use items, and the "battling" screen is simply 3D eye candy. Since this will be an indie game, I won't be spending $$$ on a team of professional 3D artists/animators, so my edge needs to be different. What are some alternatives to expensive eye candy that you or others have used to make a non-3D PvP game more fun and engaging? Did the alternative concepts survive the release?

    Read the article

  • 2D non-tile based map editor

    - by Jonesy
    I am currently developing a relatively simple 2D, topdown oriented adventure game for the iPhone and was wondering what would be the easiest way to create the maps for my game. I figured I would need some kind of visual editor that would give me immediate feedback and would allow me to place all objects in the world exactly where I want them. I could then load the saved representation of the world I create in the editor in my game. So, I am looking for a simple map editor that allows me to do this. All the objects in my game are simply textured rectangles build up from two triangles. All I need to be able to do is position different rectangles/objects in the map, and give them a texture. I am using texture atlases, so it would be useful to be able to assign portions of textures to the objects. I then need to be able to extract all the objects from the saved representation of my maps, together with the name/identifier of the texture(atlas) they use, and the area of the texture atlas. I have looked at some tile-based map editors like Tiled and Ogmo, but they don't seem to be able to do what I want. Any suggestions? EDIT: a more concrete example: something like the GameMaker level editor, but then with added export functionality in a handy format.

    Read the article

  • Programmer friendly non-voxel art styles?

    - by Overv
    Like many other programmers I've always wanted to make a game, but simply lack the skills to do any production quality graphics. I am however sure that I want to do the models and textures myself, because I need a lot of different objects and I am sure I wouldn't be able to find good matching models on 3D sites. That means I'll have to pick an art style that is "simple", programmer friendly. An extreme example of this is of course Minecraft, but I don't want to go that basic. I'm absolutely against creating a voxel game. What kind of art styles are out there that are relatively simple, i.e. things made out of basic shapes and textures, but are still good enough to form a believable and detailed world? An example of what I mean is wind waker. The objects are formed of relatively simples shapes, but still provide enough detail to create a nice, living world. The environment my game is set in is a city environment. What I'm really asking for here are good examples of "simple" art styles applied in practice, so I can choose one that fits my skills.

    Read the article

  • How to attach a sprite to a TMXTiledMap at a particular coordinate, in AndEngine?

    - by shailenTJ
    I am trying to add a sprite at a "grid" location on the tiled map. The TMX tiled Map is like a grid, and you can access the size of the grid by calling mTMXtiledMap.getTileRows() and mTMXtiledMap.getTileColumns(). I want to add an object at grid location, say (2, 5). My tileMap is of size (10,10). How can I do that? There is no function like mTMXTiledMap.addChild(int x, int y, Entity mEntity). I would appreciate any suggestions!

    Read the article

  • How can I draw an arrow at the edge of the screen pointing to an object that is off screen?

    - by Adam Henderson
    I am wishing to do what is described in this topic: http://www.allegro.cc/forums/print-thread/283220 I have attempted a variety of the methods mentioned here. First I tried to use the method described by Carrus85: Just take the ratio of the two triangle hypontenuses (doesn't matter which triagle you use for the other, I suggest point 1 and point 2 as the distance you calculate). This will give you the aspect ratio percentage of the triangle in the corner from the larger triangle. Then you simply multiply deltax by that value to get the x-coordinate offset, and deltay by that value to get the y-coordinate offset. But I could not find a way to calculate how far the object is away from the edge of the screen. I then tried using ray casting (which I have never done before) suggested by 23yrold3yrold: Fire a ray from the center of the screen to the offscreen object. Calculate where on the rectangle the ray intersects. There's your coordinates. I first calculated the hypotenuse of the triangle formed by the difference in x and y positions of the two points. I used this to create a unit vector along that line. I looped through that vector until either the x coordinate or the y coordinate was off the screen. The two current x and y values then form the x and y of the arrow. Here is the code for my ray casting method (written in C++ and Allegro 5) void renderArrows(Object* i) { float x1 = i->getX() + (i->getWidth() / 2); float y1 = i->getY() + (i->getHeight() / 2); float x2 = screenCentreX; float y2 = ScreenCentreY; float dx = x2 - x1; float dy = y2 - y1; float hypotSquared = (dx * dx) + (dy * dy); float hypot = sqrt(hypotSquared); float unitX = dx / hypot; float unitY = dy / hypot; float rayX = x2 - view->getViewportX(); float rayY = y2 - view->getViewportY(); float arrowX = 0; float arrowY = 0; bool posFound = false; while(posFound == false) { rayX += unitX; rayY += unitY; if(rayX <= 0 || rayX >= screenWidth || rayY <= 0 || rayY >= screenHeight) { arrowX = rayX; arrowY = rayY; posFound = true; } } al_draw_bitmap(sprite, arrowX - spriteWidth, arrowY - spriteHeight, 0); } This was relatively successful. Arrows are displayed in the bottom right section of the screen when objects are located above and left of the screen as if the locations of the where the arrows are drawn have been rotated 180 degrees around the center of the screen. I assumed this was due to the fact that when I was calculating the hypotenuse of the triangle, it would always be positive regardless of whether or not the difference in x or difference in y is negative. Thinking about it, ray casting does not seem like a good way of solving the problem (due to the fact that it involves using sqrt() and a large for loop). Any help finding a suitable solution would be greatly appreciated, Thanks Adam

    Read the article

  • Facilitating XNA game deployments for non programmers

    - by Sal
    I'm currently working on an RPG, using the RPG starter kit from XNA as a base. (http://xbox.create.msdn.com/en-US/education/catalog/sample/roleplaying_game) I'm working with a small team (two designers and one music/sound artist), but I'm the only programmer. Currently, we're working with the following (unsustainable) system: the team creates new pics/sounds to add to the game, or they modify existing sounds/pics, then they commit their work to a repository, where we keep a current build of everything. (Code, images, sound, etc.) Every day or so, I create a new installer, reflecting the new images, code changes, and sound, and everyone installs it. My issue is this: I want to create a system where the rest of the team can replace the combat sounds, for instance, and they can immediately see the changes, without having to wait for me to build. The way XNA's setup, if I publish, it encodes all of the image and sound files, so the team can't "hot swap." I can set up Microsoft VS on everyone's machine and show them how to quickly publish, but I wanted to know if there was a simpler way of doing this. Has anyone come up against this when working with teams using XNA?

    Read the article

  • Loading a new instance of a class through XML not working quite right

    - by Thegluestickman
    I'm having trouble with XML and XNA. I want to be able to load weapon settings through XML to make my weapons easier to make and to have less code in the actual project file. So I started out making a basic XML document, something to just assign variables with. But no matter what I changed it gave me a new error every time. The code below gives me a "XML element 'Tag' not found", I added and it started to say the variables weren't found. What I wanted to do in the XML file as well, was load a texture for the file too. So I created a static class to hold my texture values, then in the Texture tag of my XML document I would set it to that instance too. I think that's were the problems are occuring because that's where the "XML element 'Tag' not found" error is pointing me too. My XML document: <XnaContent> <Asset Type="ConversationEngine.Weapon"> <weaponStrength>0</weaponStrength> <damageModifiers>0</damageModifiers> <speed>0</speed> <magicDefense>0</magicDefense> <description>0</description> <identifier>0</identifier> <weaponTexture>LoadWeaponTextures.ironSword</weaponTexture> </Asset> </XnaContent> My Class to load the weapon XML: public static class LoadWeaponXML { static Weapon Weapons; public static Weapon WeaponLoad(ContentManager content, int id) { Weapons = content.Load<Weapon>(@"Weapons/" + id); return Weapons; } } public static class LoadWeaponTextures { public static Texture2D ironSword; public static void TextureLoad(ContentManager content) { ironSword = content.Load<Texture2D>("Sword"); } } I'm not entirely sure if you can load textures through XML, but any help would be greatly appreciated.

    Read the article

  • Resources for game networking in Java

    - by pudelhund
    I am currently working on a Java multiplayer game. The game itself (single player) already works perfectly fine and so does the chat. The only thing that is really missing is the multiplayer part. Sadly I am absolutely clueless on where to start with that. I roughly know that I will have to work with packages, and I also know many things about streaming etc (chat is already working). Oh and it should - according to this article - be a UDP server. My problem is that I can't find any resources on how to do this. A tutorial (book or website) would be perfect, alternatively a good example of an open source client/server (in Java of course) would be fine as well. If you feel like doing something helpful I'd also really appreciate someone "privately" teaching me via email or some chat program :) Thank you!

    Read the article

  • How to properly render a Frame Buffer to the BackBuffer in Stage3D / AGAL

    - by bigp
    After doing a render pass with RenderToTarget (RTT), how do you properly render that texture buffer to the screen while maintaining original scale / proportions so it doesn't stretch or lose quality? Can an AGAL VertexShader & FragmentShader be written so it's adaptable to any Texture size and Viewport dimensions? I find I'm getting some "blocky" effects in some of my first attempts at "ping-ponging" between two Texture buffers (to create trailing effects). Perhaps I'm not using the UVs correctly between the rendering-to-target and/or the backbuffer? Is there a simpler way just to "splash" the texture on the backbuffer, or is a Quad absolutely necessary (4 vertices, 2 triangles)? If it needs the Quad, should the Texture buffer be fully drawn (0.0 to 1.0 for vertical and horizontal UVs), or only a percentage of it should, like the example below? Texture Buffer U: 0.0 to viewport.width/texturebuffer.width; Texture Buffer V: 0.0 to viewport.height/texturebuffer.height; Thanks!

    Read the article

  • Traffic estimation for a multiplayer flash game

    - by Steve Addington
    hey, i want to know if my rough traffic estimations are right, it would be for a pretty simple realtime flashgame in the style of haxball (but not as a soccer game) heres a video of it http://www.youtube.com/watch?v=z_xBdFg1RcI So here comes my estimation, i dont know if they are realistic! i hope someone can help me. consider the packet attached as a typical one sent every 200ms, its 148bytes + 64 bytes of header will make around a 200bytes packet. The server will receive 200bytes x 6 players x 5 times a sec=6000bytes/s=5.85Kbytes/s=46.9kbit/s plus he has to send all back to the players, so at this point are 94Kbit/s.The server received all the information, perform the definitive calculation and send the new position to all players, in a bigger packet of around 900bytes that have to be delivered to the others 6, which makes 900bytes x 6 players x 5 times a sec=27000bytes/s=26Kbytes/s=210kbit/s. overall that would be 26kbyte per second. thats like 130mb traffic per hour for a 6player room. but somehow i think the numbers are too high? that would be really much traffic for such a simple game. did i calculate something wrong?

    Read the article

  • Approaches to timed puzzle elements

    - by ndg
    I'm working on a side scrolling game that has a number of timed puzzle elements. As a simple example: I have a number of moving platforms that have been setup to transition in a pattern. Ideally I'd like to ensure that as the player first approaches them, they are in an ideal state -- whereby the player can witness the full transition and more experienced players (i.e: speedrunners) can complete the puzzle immediately without having to wait for the current transition to complete. The issue here, in a nutshell, is that because these platforms begin transitioning at the start of the level, it's impossible to correctly calculate when the player is likely to stumble upon them. I've done a fair bit of Googling but haven't managed to turn up any decent resources with regards to solving a problem like this. The obvious solution is to only begin updating the objects when the player (or more likely: the camera) first encounters them. But this becomes difficult when you consider more complicated situations. It seems like potentially the easiest way of handling this is to have an invisible trigger volume that will tell any puzzle elements located inside of it that the player has 'arrived' upon first colliding with the player. But this would mean I'd have to logically group puzzle elements, which could become fairly messy in a hurry. Take, for instance, a puzzle that appears to the right of the screen. It may take the player a number of seconds to reach it. It would look strange if the elements involved were to remain stationary. But by the time the player arrives, it's likely things will be 'out of sync'. I wanted to post here in the hopes that others know of, or have implemented, a decent solution to this problem?

    Read the article

  • VBO and shaders confusion, what's their connection?

    - by Jeffrey
    Considering OpenGL 2.1 VBOs and 1.20 GLSL shaders: When creating an entity like "Zombie", is it good to initialize just the VBO buffer with the data once and do N glDrawArrays() calls per each N zombies? Is there a more efficient way? (With a single call we cannot pass different uniforms to the shader to calculate an offset, see point 3) When dealing with logical object (player, tree, cube etc), should I always use the same shader or should I customize (or be able to customize) the shaders per each object? Considering an entity class, should I create and define the shader at object initialization? When having a movable object such as a human, is there any more powerful way to deal with its coordinates than to initialize its VBO object at 0,0 and define an uniform offset to pass to the shader to calculate its real position? Could you make an example of the Data Oriented Design on creating a generic zombie class? Is the following good? Zombielist class: class ZombieList { GLuint vbo; // generic zombie vertex model std::vector<color>; // object default color std::vector<texture>; // objects textures std::vector<vector3D>; // objects positions public: unsigned int create(); // return object id void move(unsigned int objId, vector3D offset); void rotate(unsigned int objId, float angle); void setColor(unsigned int objId, color c); void setPosition(unsigned int objId, color c); void setTexture(unsigned int, unsigned int); ... void update(Player*); // move towards player, attack if near } Example: Player p; Zombielist zl; unsigned int first = zl.create(); zl.setPosition(first, vector3D(50, 50)); zl.setTexture(first, texture("zombie1.png")); ... while (running) { // main loop ... zl.update(&p); zl.draw(); // draw every zombie }

    Read the article

  • How to create array with unique sprites? in cocos2d iphone

    - by prakash s
    I write the code like this. This displays only one sprite (red colour bubble) with number of times and moving down, but actually I want to display different sprites (different colour bubble) every time and moving down. I also add no of .png images in resource folder of my project. Here I used only 3.png, but I need to display all *.png images (different colour bubbles) in my project but I don't know how to get this. Please help me Thank you. Here is the code: -(void)addTarget { CCSprite *target = [CCSprite spriteWithFile:@"3.png" rect:CGRectMake(0, 0, 256, 256)]; CGSize winSize = [[CCDirector sharedDirector] winSize]; int minY = target.contentSize.height/2; int maxY = winSize.height - target.contentSize.height/2; int rangeY = maxY - minY; int actualY = (arc4random() % rangeY) + minY; // Create the target slightly off-screen along the right edge, // and along a random position along the Y axis as calculated above target.position = ccp(winSize.width + (target.contentSize.width/2), actualY); [self addChild:target]; // Determine speed of the target int minDuration = 4.0; int maxDuration = 12.0; int rangeDuration = maxDuration - minDuration; int actualDuration = (arc4random() % rangeDuration) + minDuration; // Create the actions id actionMove = [CCMoveTo actionWithDuration:actualDuration position:ccp(-target.contentSize.width/2,actualY)]; id actionMoveDone = [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)]; [target runAction:[CCSequence actions:actionMove, actionMoveDone, nil]]; // Add to targets array target.tag = 2; [_targets addObject:target]; } -(void)gameLogic:(ccTime)dt { [self addTarget]; } -(id) init { if( (self=[super initWithColor:ccc4(255,255,255,255)] )) { // Enable touch events self.isTouchEnabled = YES; // Initialize arrays _targets = [[NSMutableArray alloc] init]; _projectiles = [[NSMutableArray alloc] init]; // Get the dimensions of the window for calculation purposes CGSize winSize = [[CCDirector sharedDirector] winSize]; [self schedule:@selector(gameLogic:) interval:1.0]; [self schedule:@selector(update:)]; } return self; } - (void)update:(ccTime)dt { NSMutableArray *projectilesToDelete = [[NSMutableArray alloc] init]; for (CCSprite *projectile in _projectiles) { CGRect projectileRect = CGRectMake(projectile.position.x - (projectile.contentSize.width/2), projectile.position.y - (projectile.contentSize.height/2), projectile.contentSize.width, projectile.contentSize.height); NSMutableArray *targetsToDelete = [[NSMutableArray alloc] init]; for (CCSprite *target in _targets) { CGRect targetRect = CGRectMake(target.position.x - (target.contentSize.width/2), target.position.y - (target.contentSize.height/2), target.contentSize.width, target.contentSize.height); if (CGRectIntersectsRect(projectileRect, targetRect)) { [targetsToDelete addObject:target]; } } for (CCSprite *target in targetsToDelete) { [_targets removeObject:target]; [self removeChild:target cleanup:YES]; _projectilesDestroyed++; if (_projectilesDestroyed > 30) { //GameOverScene *gameOverScene = [GameOverScene node]; // [gameOverScene.layer.label setString:@"You Win!"]; // [[CCDirector sharedDirector] replaceScene:gameOverScene]; } } if (targetsToDelete.count > 0) { [projectilesToDelete addObject:projectile]; } [targetsToDelete release]; } for (CCSprite *projectile in projectilesToDelete) { [_projectiles removeObject:projectile]; [self removeChild:projectile cleanup:YES]; } [projectilesToDelete release]; }

    Read the article

  • What are the valid DepthBuffer Texture formats in DirectX 11? And which are also valid for a staging resource?

    - by sebf
    I am trying to read the contents of the depth buffer into main memory so that my CPU side code can do Some Stuff™ with it. I am attempting to do this by creating a staging resource which can be read by the CPU, which I will copy the contents of the depth buffer into before reading it. I keep encountering errors however, because of, I believe, incompatibilities between the resource format and the view formats. Threads like these lead me to believe it is possible in DX11 to access the depth buffer as a resource, and that I can create a resource with a typeless format and have it interpreted in the view as another, but I cannot get it to work. What are the valid formats for the resource to be used as the depth buffer? Which of these are also valid for a CPU accessible staging resource?

    Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >