Search Results

Search found 2130 results on 86 pages for 'swap'.

Page 44/86 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • Restoring the exact state of a linux install to a different laptop with different sized drives and other hardware

    - by user259774
    I have an IBM running a Manjaro install that has already been used and settled into, with packages installed, browser profiles, etc, etc. The drive is 60gb, and it has a swap partition and an ext4 root partition. I need to move this profile to a Toshiba computer with a 320gb drive. How should I go about this? My inclination would be to shut down the toshiba, boot a live linux system, dd the whole 60gb drive to a file, boot the toshiba to a live system, then dd the file to its 320gb drive. Would this work? I know that it wouldn't with windows, but I believe this is an artificially imposed limitation from Microsoft. Is this correct, or is Linux similarly limited? If not, how could I go about this? Would clonezilla work, or would the hardware disparities prevent it from working?

    Read the article

  • nginx+php-fpm help optimize configs

    - by Dmitro
    I have 3 servers. First server (CPU - model name: 06/17, 2.66GHz, 4 cores, 8GB RAM) have nginx as load balancer with next config upstream lb_mydomain { server mydomain.ru:81 weight=2; server 66.0.0.18 weight=6; } server { listen 80; server_name ~(?!mydomain.ru)(.*); client_max_body_size 20m; location / { proxy_pass http://lb_mydomain; proxy_redirect off; proxy_set_header Connection close; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass_header Set-Cookie; proxy_pass_header P3P; proxy_pass_header Content-Type; proxy_pass_header Content-Disposition; proxy_pass_header Content-Length; } } And configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 80 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 pm.status_path = /status ping.path = /ping ;ping.response = pong request_terminate_timeout = 30s request_slowlog_timeout = 10s slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 20 php-fpm processes which use from 1% - 15% CPU. So it's have high load averadge: top - 15:36:22 up 34 days, 20:54, 1 user, load average: 5.98, 7.75, 8.78 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 34.1%us, 3.2%sy, 0.0%ni, 37.0%id, 24.8%wa, 0.0%hi, 0.9%si, 0.0%st Mem: 8183228k total, 7538584k used, 644644k free, 351136k buffers Swap: 9936892k total, 14636k used, 9922256k free, 990540k cached Second server(CPU - model name: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz, 8 cores, 8GB RAM). Nginx configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config of php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 50 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 ;pm.status_path = /status ;ping.path = /ping ;ping.response = pong ;request_terminate_timeout = 0 ;request_slowlog_timeout = 0 ;slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 50 php-fpm processes which use from 10% - 25% CPU. So it's have high load averadge: top - 15:53:05 up 33 days, 1:15, 1 user, load average: 41.35, 40.28, 39.61 Tasks: 239 total, 40 running, 199 sleeping, 0 stopped, 0 zombie Cpu(s): 96.5%us, 3.1%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.4%si, 0.0%st Mem: 8185560k total, 7804224k used, 381336k free, 161648k buffers Swap: 19802108k total, 16k used, 19802092k free, 5068112k cached Third server is server with database postgresql. Also i try ab -n 50 -c 5 http://www.mydomain.ru/ And I get next info: Complete requests: 50 Failed requests: 48 (Connect: 0, Receive: 0, Length: 48, Exceptions: 0) Write errors: 0 Total transferred: 9271367 bytes HTML transferred: 9247767 bytes Requests per second: 1.02 [#/sec] (mean) Time per request: 4882.427 [ms] (mean) Time per request: 976.486 [ms] (mean, across all concurrent requests) Transfer rate: 185.44 [Kbytes/sec] received Please advise how can I make lower level of load average?

    Read the article

  • Why does the Java VM process eat up more RAM then specified in -Xmx parameter?

    - by evilpenguin
    I have multiple servers running CentOS 5.4 and only one application running on Java VM. I've configured the Java VM with the following arguments: java -Xmx4500M -server -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:NewSize=1024m -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true The machines I'm running the VM on has 6 GB RAM and no other applications running. After a while, the java process starts to hit the swap space really hard, I get this info out of the top command: 7658 root 25 0 11.7g 3.9g 4796 S 39.4 67.3 543:54.17 java On the other hand, if I connect via JConsole, it reports the Java VM has 2.6 GB used, 4.6 GB commited and 4.6 Gb max. java -version returns: java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode) Why is the Java VM expanding so much past it's allocated heap size? And where does that memory go, if it's not reported in JConsole?

    Read the article

  • Can someone explain the "use-cases" for the default munin graphs?

    - by exhuma
    When installing munin, it activates a default set of plugins (at least on ubuntu). Alternatively, you can simply run munin-node-configure to figure out which plugins are supported on your system. Most of these plugins plot straight-forward data. My question is not to explain the nature of the data (well... maybe for some) but what is it that you look for in these graphs? It is easy to install munin and see fancy graphs. But having the graphs and not being able to "read" them renders them totally useless. I am going to list standard plugins which are enabled by default on my system. So it's going to be a long list. For completeness, I am also going to list plugins which I think to understand and give a short explanation as to what I think it's used for. Pleas correct if I am wrong with any of them. So let me split this questions in three parts: Plugins where I don't even understand the data Plugins where I understand the data but don't know what I should look out for Plugins which I think to understand Plugins where I don't even understand the data These may contain questions that are not necessarily aimed at munin alone. Not understanding the data usually mean a gap in fundamental knowledge on operating systems/hardware.... ;) Feel free to respond with a "giyf" answer. These are plugins where I can only guess what's going on... I hardly want to look at these "guessing"... Disk IOs per device (IOs/second)What's an IO. I know it stands for input/output. But that's as far as it goes. Disk latency per device (Average IO wait)Not a clue what an "IO wait" is... IO Service TimeThis one is a huge mess, and it's near impossible to see something in the graph at all. Plugins where I understand the data but don't know what I should look out for IOStat (blocks/second read/written)I assume, the thing to look out for in here are spikes? Which would mean that the device is in heavy use? Available entropy (bytes)I assume that this is important for random number generation? Why would I graph this? So far the value has always been near constant. VMStat (running/I/O sleep processes)What's the difference between this one and the "processes" graph? Both show running/sleeping processes, whereas the "Processes" graph seems to have more details. Disk throughput per device (bytes/second read/written) What's thedifference between this one and the "IOStat" graph? inode table usageWhat should I look for in this graph? Plugins which I think to understand I'll be guessing some things here... correct me if I am wrong. Disk usage in percent (percent)How much disk space is used/remaining. As this is approaching 100%, you should consider cleaning up or extend the partition. This is extremely important for the root partition. Firewall Throughput (packets/second)The number of packets passing through the firewall. If this is spiking for a longer period of time, it could be a sign of a DOS attack (or we are simply recieving a large file). It can also give you an idea about your firewall performance. If it's levelling out and you need more "power" you should consider load balancing. If it's levelling out and see a correlation with your CPU load, it could also mean that your hardware is not fast enough. Correlations with disk usage could point to excessive LOG targets in you FW config. eth0 errors (packets in/out)Network errors. If this value is increasing, it could be a sign of faulty hardware. eth0 traffic (bits/second in/out)Raw network traffic. This should correlate with Firewall throughput. number of threadsAn ever-increasing value might point to a process not properly closing threads. Investigate! processesBreakdown of active processes (including sleeping). A quick spike in here might point to a fork-bomb. A slowly, but ever-increasing value might point to an application spawning sub-processes but not properly closing them. Investigate using ps faux. process priorityThis shows the distribution of process priorities. Having only high-priority processes is not of much use. Consider de-prioritizing some. cpu usageFairly straight-forward. If this is spiking, you may have an attack going on, or a process is hogging the CPU. Idf it's slowly increasing and approaching max in normal operations, you should consider upgrading your hardware (or load-balancing). file table usageNumber of actively open files. If this is reaching max, you may have a process opening, but not properly releasing files. load averageShows an summarized value for the system load. Should correlate with CPU usage. Increasing values can come from a number of sources. Look for correlations with other graphs. memory usageA graphical representation of you memory. As long as you have a lot of unused+cache+buffers you are fine. swap in/outShows the activity on your swap partition. This should always be 0. If you see activity on this, you should add more memory to your machine!

    Read the article

  • CentOS Insufficient space in download directory /var/cache/yum/base/packages

    - by Joao Heleno
    Hello! I was trying to yum install libpcap when I got Error Downloading Packages: 14:libpcap-0.9.4-15.el5.i386: Insufficient space in download directory /var/cache/yum/base/packages * free 0 * needed 108 k Here's output from df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda1 20G 19G 0 100% / /dev/sda3 202G 38G 154G 20% /home tmpfs 1.5G 0 1.5G 0% /dev/shm And fdisk -l: Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux I have launched yum clean all with no success clearing up space. Please advise. Thanks.

    Read the article

  • fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

    - by d0nd
    Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

    Read the article

  • Best SQL Server Configuration with this hardware.

    - by DavidStein
    I just received my new SQL Server from Dell. The server will be serve approximately 15 OLTP databases which average 10GB in size. Here are the basic specs: Dell PowerEdge R510 with up to 12 Hot Swap HDDs,LED Intel Xeon E5649 2.53GHz, 12M Cache, 5.86 GT/s QPI, 6 core (Quantity of 2) 48GB Memory (6x8GB), 1333MHz Dual Ranked RDIMMs for 2 Processors, Optimized PERC H700 Integrated RAID Controller, 1GB NV Cache 300GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 4) 600GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 6) My first thought was to use 3 arrays. OS - Raid 1 - (2)300GB T-Log - Raid 1 (2)300GB DB - Raid 5 (5) 600GB Backup - (1) 600GB - non-raided. However, I could also do the following after purchasing one more drive for backup. OS and T-Log - Raid 10 - (4)300GB DB - Raid 10 (6)600GB The hard drive space is not an issue as the databases are not that large. I'm just trying to optimize the speed of the applications using these databases. So, what would you guys recommend?

    Read the article

  • MacBook: Can't boot into Linux partition after installation.

    - by Otto
    Hello I just installed Ubuntu. I created a partition in MacOSx using Disk utility, then deleted the partition and installed Ubuntu on the free space created. After the installation, Ubuntu said it would reboot. I hang on shutdown (which is normal, as google told me), so I used the power button to turn the MacBook off. Now I want to boot into Ubuntu. Pressing option/alt on startup only shows me the MacOSx and Windows partition. Also, the Linux partition isn't showing up on my MacOSx desktop. And in Disk Utility, I can see 3 grayed out partitions: "disk0s4", "disk0s5" and "Linux Swap". What can I do to boot into Ubuntu without losing my other partitions? Thank you for your help.

    Read the article

  • Toshiba monitor not displaying anything

    - by MirroredFate
    Alright, so I agreed to fix a friends computer, thinking it was a software problem, not hardware. I was going to use an XP disc and valid code to swap her from Vista to XP, as apparently Vista had some driver issues. I found out, however, that the real problem was her heat sink was completely clogged, causing the computer to overheat and shut down. So, I took the computer apart and cleaned the heat sink. However, after putting it all back together, and turning it on, nothing at all shows up. I plugged in an external monitor, and nothing shows up on that either. I have double, triple, decuply checked all the connections and everything appears to be plugged in, attached, and in the right place. I am out of ideas. So, my question is, does anyone have any clue what is going on, and have suggestions I could try?

    Read the article

  • my webserver with 16GB ram shows all RAM as used, but is it really, see the 'top'

    - by Alex
    I have some questions about my web server. Its a LAMP web server running centos 5.5 and php5, mysql5. The server gets hundreds (maybe thousand) of concurrent users during peak hours. I'm trying to optimize a little and understand "top". From what I can see: all 16GB of my ram have been used up? does that mean that my server needs more memory? My swap is only 2GB, should it be increased? usually during peak hours my server load average first number is about 2.5-3. What could I do to optimize the server so that the load average even during peak doesn't go above 1? In the past I was told a good working server should stay under 1 load, is this still true? Although even during load of 2.5-3, server pages and applications seem to load with pretty good speed. what should the memory size in php.ini be set to? top - 14:30:18 up 2 days, 12:41, 5 users, load average: 1.25, 1.74, 2.92 Tasks: 305 total, 2 running, 302 sleeping, 0 stopped, 1 zombie Cpu(s): 6.3%us, 0.9%sy, 0.0%ni, 92.5%id, 0.2%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 16427200k total, 16111472k used, 315728k free, 3120316k buffers Swap: 2104496k total, 268k used, 2104228k free, 6216756k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 29080 apache 15 0 358m 36m 5192 S 20.2 0.2 2:08.40 httpd 29093 apache 18 0 357m 36m 5192 S 18.2 0.2 2:02.52 httpd 29079 apache 15 0 370m 49m 5832 S 10.0 0.3 2:32.14 httpd 1812 apache 15 0 370m 49m 5196 S 7.3 0.3 2:25.30 httpd 5204 apache 15 0 358m 36m 5168 S 5.3 0.2 0:59.28 httpd 29075 apache 15 0 370m 48m 5184 S 3.3 0.3 2:15.93 httpd 9712 apache 15 0 360m 38m 5180 S 3.0 0.2 0:54.81 httpd 29072 apache 16 0 358m 36m 5192 S 2.7 0.2 2:24.43 httpd 6310 apache 17 0 388m 67m 5180 S 2.3 0.4 0:58.85 httpd 8674 apache 15 0 343m 21m 4980 S 2.0 0.1 0:07.91 httpd 29085 apache 15 0 371m 49m 5224 S 2.0 0.3 2:16.86 httpd 29083 apache 15 0 370m 48m 5196 S 1.7 0.3 2:10.64 httpd 5575 apache 15 0 357m 36m 5228 S 1.3 0.2 0:53.78 httpd 29066 apache 15 0 379m 59m 5860 R 1.3 0.4 2:11.93 httpd 29078 apache 15 0 370m 48m 5188 S 1.3 0.3 2:14.52 httpd 29084 apache 15 0 370m 48m 5208 S 1.0 0.3 2:02.49 httpd 29089 apache 15 0 370m 48m 5188 S 1.0 0.3 2:27.61 httpd 29082 apache 15 0 390m 68m 5188 S 0.7 0.4 2:32.48 httpd 29984 apache 15 0 358m 36m 5228 S 0.7 0.2 2:08.32 httpd 3571 root 16 0 13400 1792 848 S 0.3 0.0 2:37.89 top 4419 mysql 15 0 668m 175m 7204 S 0.3 1.1 3:32.25 mysqld 28181 root 15 0 90460 3624 2680 S 0.3 0.0 0:17.60 sshd 29091 apache 15 0 390m 69m 5196 S 0.3 0.4 2:29.99 httpd 32476 root 15 0 12900 1320 848 R 0.3 0.0 0:06.46 top 1 root 15 0 10372 680 572 S 0.0 0.0 0:02.01 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.51 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:01.45 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.22 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root RT -5 0 0 0 S 0.0 0.0 0:00.19 migration/8 27 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/8 28 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/8 29 root RT -5 0 0 0 S 0.0 0.0 0:00.34 migration/9 30 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/9 31 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/9 32 root RT -5 0 0 0 S 0.0 0.0 0:00.16 migration/10 33 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/10 34 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/10 35 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/11 36 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/11 37 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/11 38 root RT -5 0 0 0 S 0.0 0.0 0:00.35 migration/12

    Read the article

  • I need a server or service that reroutes DNS requests

    - by Relentim
    We have two external servers, Dev and Prod. We are a software house and in the code we have a subdomain metrics.company.com that points to Prod. Development is continuous and our internal and external developers and testers will need to switch from Dev to Prod and back again. It is not an option to have a different sub domain in the code during development and change this for production. The way we wish to switch between Dev and Prod is to use DNS. We need a public DNS server that behaves normally apart from routing metrics.company.com to Dev. The users will be able to swap their DNS back and forward to hit the different servers. What is the easiest way to do this? Is there a company that hosts this service or am I going to have to rent a server and set it up myself? Any help would be much appreciated.

    Read the article

  • High Load - Low IO - Low CPU usage

    - by devup
    I have a system whose load is rather high. As you can see from the top output below, CPU usage and I/O is negligible: top - 17:31:59 up 4 days, 2:34, 2 users, load average: 1.00, 0.99, 1.00 Tasks: 71 total, 1 running, 70 sleeping, 0 stopped, 0 zombie Cpu(s): 2.0%us, 2.0%sy, 0.0%ni, 95.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 960720k total, 707288k used, 253432k free, 67328k buffers Swap: 2811896k total, 2644k used, 2809252k free, 528928k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15310 root 20 0 2512 1128 888 R 2.1 0.1 0:00.05 top I would appreciate any assistance with isolating the cause(s) of high load for when I/O and CPU are not factors.

    Read the article

  • iMac invalid memory access and then crash?

    - by Sam McAfee
    My iMac G5 from a few years ago (the square white one) dies now, with a message about an invalid memory access. It goes straight to an Open Firmware prompt and doesn't even load the Mac OS at all. Am I correct in guessing that the memory is probably the issue, and that if I replace it, we may be able to boot again as normal? That's my gut feeling anyway, so I ordered some more memory and plan to swap it today. Any thoughts? Ideas?

    Read the article

  • newbie hard drive upgrade question

    - by musoNic80
    I have an Acer Aspire 3500WLMi laptop. It currently has a 40gb hard drive which I would like to upgrade. Could someone talk me through the process? I've listed my concerns/queries... Can I buy and install any 2.5" SATA or IDE hard drive into this machine? Should I buy somesort of USB caddy and clone my existing drive onto the new one via USB then physically swap the drives over? My current disk is partitioned to include a small amount of space for a Ubuntu install. Will a clone keep the current partition sizes or is it best for me to repartition once I've cloned? Many thanks.

    Read the article

  • If I exchange the CPU, must I reinstall the OSes? (swapping cpus from one *nix-like to another)

    - by dag729
    Hi, as suggested by the title, I want to change CPU: actually I have two computers, one with Ubuntu running on an AMD Athlon 64 dual core 5200+ and the other with FreeBSD running on an AMD Sempron single core LE-1250. I would like to swap (I am not sure that this is the correct term...) the CPUs from one computer to the other one, that is take the dual core from the ubuntu pc and put it inside the freebsd pc and viceversa. The mobo is the same. Do you think I will encounter problems?

    Read the article

  • virtual machines and cryptography

    - by Unknown
    I suspect I'm a bit offtopic with the site mission, but it seems me more fitting for the question than stackoverflow i'm in preparing to create a vm with sensible data (personal use, it will be a web+mail+... appliance of sorts), i'd like to protect the data even with cryptography; the final choice have to be cross-platform for the host basically, I have to choose between guest system-level cryptography (say, dm-crypt or similar) or host level cryptography with truecrypt. do you think that the "truecrypt-volume contained virtualized disks" approach will hit the i/o performance of the vm badly (and therefore dm-crypt like approaches into the vm would be better), or is it doable? I'd like to protect all the guest data, not only my personal data, to be able to suspend the vm freely without worrying for the swap partition, etc

    Read the article

  • Server hung with "blocked for more than 120 seconds", diskless

    - by alterpub
    I have server which hung every 2-5 days. dmesg show following situation: kernel: [490894.231753] INFO: task munin-html:10187 blocked for more than 120 seconds. kernel: [490894.231799] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [490894.231843] munin-html D 0000000000000000 0 10187 9796 0x00000000 kernel: [490894.231878] ffff88063174b968 0000000000000082 ffff88063174b8d8 0000000000015b80 kernel: [490894.231930] ffff88063174bfd8 0000000000015b80 ffff88063174bfd8 ffff88062fe644d0 kernel: [490894.231982] 0000000000015b80 0000000000015b80 ffff88063174bfd8 0000000000015b80 kernel: [490894.232033] Call Trace: kernel: [490894.232059] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232089] [<ffffffff815a1f13>] io_schedule+0x73/0xc0 kernel: [490894.232115] [<ffffffff8117fd25>] sync_buffer+0x45/0x50 kernel: [490894.232143] [<ffffffff815a258f>] __wait_on_bit+0x5f/0x90 kernel: [490894.232170] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232197] [<ffffffff815a2638>] out_of_line_wait_on_bit+0x78/0x90 kernel: [490894.232227] [<ffffffff81080250>] ? wake_bit_function+0x0/0x40 kernel: [490894.232255] [<ffffffff8117fcd6>] __wait_on_buffer+0x26/0x30 kernel: [490894.232288] [<ffffffffa00131be>] squashfs_read_data+0x1be/0x520 [squashfs] kernel: [490894.232320] [<ffffffff8114f0f1>] ? __mem_cgroup_try_charge+0x71/0x450 kernel: [490894.232350] [<ffffffffa0013963>] squashfs_cache_get+0x1c3/0x320 [squashfs] kernel: [490894.232381] [<ffffffffa00136eb>] ? squashfs_copy_data+0x10b/0x130 [squashfs] kernel: [490894.232426] [<ffffffff815a3dbe>] ? _raw_spin_lock+0xe/0x20 kernel: [490894.232454] [<ffffffffa0013b68>] ? squashfs_read_metadata+0x48/0xf0 [squashfs] kernel: [490894.232499] [<ffffffffa0013ae1>] squashfs_get_datablock+0x21/0x30 [squashfs] kernel: [490894.232544] [<ffffffffa0015026>] squashfs_readpage+0x436/0x4a0 [squashfs] kernel: [490894.232575] [<ffffffff8111a375>] ? __inc_zone_page_state+0x35/0x40 kernel: [490894.232606] [<ffffffff8110d072>] __do_page_cache_readahead+0x172/0x210 kernel: [490894.232636] [<ffffffff8110d131>] ra_submit+0x21/0x30 kernel: [490894.232662] [<ffffffff811045f3>] filemap_fault+0x3f3/0x450 kernel: [490894.232691] [<ffffffff812bd156>] ? prio_tree_insert+0x256/0x2b0 kernel: [490894.232726] [<ffffffffa009225d>] aufs_fault+0x11d/0x170 [aufs] kernel: [490894.232755] [<ffffffff8111f6d4>] __do_fault+0x54/0x560 kernel: [490894.232782] [<ffffffff81122f39>] handle_mm_fault+0x1b9/0x440 kernel: [490894.232811] [<ffffffff811286f5>] ? do_mmap_pgoff+0x335/0x380 kernel: [490894.232840] [<ffffffff815a7af5>] do_page_fault+0x125/0x350 kernel: [490894.232867] [<ffffffff815a4675>] page_fault+0x25/0x30 Os info cat /etc/issue.net Ubuntu 10.04.2 LTS uname -a Linux Shard1Host3 2.6.35-32-server #68~lucid1-Ubuntu SMP Wed Mar 28 18:33:00 UTC 2012 x86_64 GNU/Linux This system load via ltsp and hasn't harddrives also it has a lot of memory 24Gb. free -m total used free shared buffers cached Mem: 24152 17090 7061 0 50 494 -/+ buffers/cache: 16545 7607 Swap: 0 0 0 I put vmstat info here but I think it won't give results after reboot vmstat 1 30 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 7231156 52196 506400 0 0 0 0 172 143 7 0 92 0 1 0 0 7231024 52196 506400 0 0 0 0 7859 16233 5 0 94 0 0 0 0 7231024 52196 506400 0 0 0 0 7870 16446 2 0 98 0 0 0 0 7230900 52196 506400 0 0 0 0 7308 15661 5 0 95 0 0 0 0 7231100 52196 506400 0 0 0 0 7960 16543 6 0 94 0 0 0 0 7231100 52196 506400 0 0 0 0 7542 16047 5 1 94 0 3 0 0 7231100 52196 506400 0 0 0 0 7709 16621 3 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7857 16552 4 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7192 15491 6 0 94 0 0 0 0 7231220 52196 506400 0 0 0 0 7423 15792 5 1 94 0 1 0 0 7231260 52196 506404 0 0 0 0 7686 16296 2 0 98 0 0 0 0 7231260 52196 506404 0 0 0 0 6976 15183 5 0 95 0 0 0 0 7231260 52196 506404 0 0 0 0 7303 15600 4 0 95 0 0 0 0 7231320 52196 506404 0 0 0 0 7967 16241 1 0 98 0 0 0 0 7231444 52196 506404 0 0 0 0 6948 15113 6 0 94 0 0 0 0 7231444 52196 506404 0 0 0 0 7931 16181 6 0 94 0 1 0 0 7231516 52196 506404 0 0 0 0 7715 15829 6 0 94 0 0 0 0 7231516 52196 506404 0 0 0 0 7771 16036 2 0 97 0 0 0 0 7231268 52196 506404 0 0 0 0 7782 16202 6 0 94 0 1 0 0 7231212 52196 506404 0 0 0 0 7457 15622 4 0 96 0 0 0 0 7231212 52196 506404 0 0 0 0 7573 16045 2 0 98 0 2 0 0 7231216 52196 506404 0 0 0 0 7689 16076 6 0 94 0 0 0 0 7231424 52196 506404 0 0 0 0 7429 15650 4 0 95 0 3 0 0 7231424 52196 506404 0 0 0 0 7534 16168 3 0 97 0 1 0 0 7230548 52196 506404 0 0 0 0 8559 15926 7 1 92 0 0 0 0 7230672 52196 506404 0 0 0 0 7720 15905 2 0 98 0 0 0 0 7230548 52196 506404 0 0 0 0 7677 16313 5 0 95 0 1 0 0 7230676 52196 506404 0 0 0 0 7209 15432 5 0 95 0 0 0 0 7230800 52196 506404 0 0 0 0 7522 15861 2 0 98 0 0 0 0 7230552 52196 506404 0 0 0 0 7760 16661 5 0 95 0 In the munin(monitoring system) graphs I see(before server hung): Disk(nbd0) IOs per device: read: 289m but avg by week 2.09m Disk(nbd0) throughput per device: read: 4.73k but avg by week 108.76 Disk(nbd0) utilization per device: 100% but avg by week 1.2% Eth0 traffic was low: in/out only 2Mbps Number of threads increased to 566 usually 392 Fork rate 1.08 but usually 2.82 VMStat(processes state) Increased to 17.77(from 0 as far as I could see in the graph) CPU usage iowait 880.46% when usually 6.67% It'll be great if somebody help me to understand what's up.

    Read the article

  • Outlook rules not working together

    - by JBurace
    I have multiple Outlook (2010) rules and these 2 are having issues together: Rule 1: Apply this rule after the message arrives with blahname in the sender's address and move it to the BlahBox folder. Rule 2: Apply this rule after the message arrives from [email protected] move it to the NoReply folder. If I have rule 1 above rule 2, only rule 1 works (noreply emails stay in the Inbox folder). If I swap and have rule 2 above rule 1, only rule 2 works (blahname emails stay in the Inbox folder). What am I doing wrong; how can I fix this so it applies both rules on incoming email? I'm fairly certain the two rules should never intersect (blahname != domain.com). Also I do not have "this computer only" checked on any rules, I avoid client-only rules.

    Read the article

  • Does disable log error for MySQL increasing it's performance ? How disable it?

    - by adnan
    Does disable log error for MySQL increasing it's performance ? How disable it ? This is my service status Server load 0.63 (8 CPUs) Memory Used 23.38% (957,600 of 4,096,000) Swap Used 0% (0 of 1) And this is print screen for process manager http://elnhrda.com/promgr.jpg This is my.cnf [mysqld] query_cache_size=64M skip-name-resolve #innodb_file_per_table=1 query_cache_limit=2M read_buffer_size = 2M read_rnd_buffer_size = 16M sort_buffer_size = 8M join_buffer_size = 8M thread_cache_size = 8 thread_concurrency = 8 innodb_buffer_pool_size = 2G Iam looking for doing any thing to increase my website speed I have VPS 4G.B RAM CENTOS 6 X86_64 Note please : this statics taken now which no any queries executed & site have not any visitors in the same time

    Read the article

  • Clear / Flush cached memory

    - by TheDave
    I have a small VPS with 6GB RAM hosting a couple of websites. Recently I have noticed that my cached memory size is quite high - see below: Cpu(s): 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.0%wa, 0.2%hi, 0.4%si, 0.0%st Mem: 6113256k total, 5949620k used, 163636k free, 398584k buffers Swap: 1048564k total, 104k used, 1048460k free, 3586468k cached After investigating if there is some method to have this flushed or cleared I stumbled upon a command which is: sync; echo 3 > /proc/sys/vm/drop_caches I read it could be useful to add this to a chron-task/job. Is this method recommended or could this lead to potential problems? The only concern I have is that I use one Magento installation on Memcached - could this have any negative effects on it? I am certainly not a pro therefore I would very much appreciate some expert advise. PS: My VPS runs on CentOS 5 x64 and I have WHM + NGINX installed.

    Read the article

  • Root partition full? CentOS

    - by Joao Heleno
    Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

    Read the article

  • which drive do I mount

    - by Crash893
    I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

    Read the article

  • HP DL380 G5 Predictive Drive Failure on a new drive

    - by CharlieJ
    Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

    Read the article

  • Is it safe to run an operating system from an USB flash drive?

    - by Georg
    I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

    Read the article

  • How do I backup my Ubuntu 9.10 system and then restore it to a new machine with different hardware?

    - by EricJLN
    I have a nicely configured Ubuntu 9.10 machine, with crossover linux (from Codeweavers) installed. I have the Nvidia drivers installed. Everything is just as I want it. Now I want to move to a new machine with different hardware: different sized hard drive, different size RAM, different video card, etc. I tried the technique suggested on Ubuntu forums, "Howto: Backup and restore your system!". The results: New system complains about swap not being found New system complains about not finding Nvidia hardware, and I can't open the System-Administration-Hardware Drivers application (i.e., /usr/bin/jockey-gtk) to fix the problem. As result of nvidia, X-Windows is throwing errors, and the on screen process for fixing X-Windows isn't working. How do I restore a backup of my old system, including my Crossover Linux installation, to a new machine with different hardware installed?

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >