Search Results

Search found 2130 results on 86 pages for 'swap'.

Page 49/86 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Disaster Recovery Plan&ndash;Rebuild System Disk (Dell Server 2900 with PERC RAID controller)

    - by Jim Lahman
    Goal: Since the system disk is a RAID 1 mirrored set, we can rebuild the shadow set by replacing one of the good sets with a blank disk Steps Shutdown and power down server Remove the disk from bay 9, which is part of the system shadow set. Put this disk on the shelf Insert blank/old disk into the empty bay     Label the new disk before inserting it into the empty bay       Power up server During the booting process, the following message appears: “Some configured disks have been removed from your system…”       Press ‘C’ to Load Configuration utility             Press 'Y' to confirm to load the foreign configuration       In this example, the system shadow set is Disk Group 2.  (Before proceeding, confirm this is the disk group in your case).  Expanding the physical disks shows a disk in bay 8 and a missing disk in bay 9.  This is correct.   Now, we have to include the new inserted disk in this group       RAID controller reporting bay 9 is empty       There may be times when the new disk is seen as a foreign disk.  In this case, do the following:     Foreign disk is reported in bay 9 CTRL-N (Next Page) to Foreign Mgt All the disk groups will be displayed.  Typically, the disk group containing the foreign disk will be grey.  To remove the foreign disk Highlight Controller Press F2 Select Foreign Select Clear (do NOT import the configuration!)       Clear the foreign configuration Now the disk can be brought into the system shadow set disk group as a hot spare   To include the newly inserted disk into the system shadowset disk group, it must be brought in as a hot spare Highlight Disk Group 2 (VD Management) Hit F2 Select 'Manage Ded. HS'     Manage dedicated hot swap Select the disk in bay 9 (Hit space bar to select) Tab to 'OK'.  Hit the return key     Select hot spare to bring into RAID 1 mirror set   Rebuild automatically commences     Rebuild in process   Restart now or restart after rebuild is completed

    Read the article

  • Optimizing Solaris 11 SHA-1 on Intel Processors

    - by danx
    SHA-1 is a "hash" or "digest" operation that produces a 160 bit (20 byte) checksum value on arbitrary data, such as a file. It is intended to uniquely identify text and to verify it hasn't been modified. Max Locktyukhin and others at Intel have improved the performance of the SHA-1 digest algorithm using multiple techniques. This code has been incorporated into Solaris 11 and is available in the Solaris Crypto Framework via the libmd(3LIB), the industry-standard libpkcs11(3LIB) library, and Solaris kernel module sha1. The optimized code is used automatically on systems with a x86 CPU supporting SSSE3 (Intel Supplemental SSSE3). Intel microprocessor architectures that support SSSE3 include Nehalem, Westmere, Sandy Bridge microprocessor families. Further optimizations are available for microprocessors that support AVX (such as Sandy Bridge). Although SHA-1 is considered obsolete because of weaknesses found in the SHA-1 algorithm—NIST recommends using at least SHA-256, SHA-1 is still widely used and will be with us for awhile more. Collisions (the same SHA-1 result for two different inputs) can be found with moderate effort. SHA-1 is used heavily though in SSL/TLS, for example. And SHA-1 is stronger than the older MD5 digest algorithm, another digest option defined in SSL/TLS. Optimizations Review SHA-1 operates by reading an arbitrary amount of data. The data is read in 512 bit (64 byte) blocks (the last block is padded in a specific way to ensure it's a full 64 bytes). Each 64 byte block has 80 "rounds" of calculations (consisting of a mixture of "ROTATE-LEFT", "AND", and "XOR") applied to the block. Each round produces a 32-bit intermediate result, called W[i]. Here's what each round operates: The first 16 rounds, rounds 0 to 15, read the 512 bit block 32 bits at-a-time. These 32 bits is used as input to the round. The remaining rounds, rounds 16 to 79, use the results from the previous rounds as input. Specifically for round i it XORs the results of rounds i-3, i-8, i-14, and i-16 and rotates the result left 1 bit. The remaining calculations for the round is a series of AND, XOR, and ROTATE-LEFT operators on the 32-bit input and some constants. The 32-bit result is saved as W[i] for round i. The 32-bit result of the final round, W[79], is the SHA-1 checksum. Optimization: Vectorization The first 16 rounds can be vectorized (computed in parallel) because they don't depend on the output of a previous round. As for the remaining rounds, because of step 2 above, computing round i depends on the results of round i-3, W[i-3], one can vectorize 3 rounds at-a-time. Max Locktyukhin found through simple factoring, explained in detail in his article referenced below, that the dependencies of round i on the results of rounds i-3, i-8, i-14, and i-16 can be replaced instead with dependencies on the results of rounds i-6, i-16, i-28, and i-32. That is, instead of initializing intermediate result W[i] with: W[i] = (W[i-3] XOR W[i-8] XOR W[i-14] XOR W[i-16]) ROTATE-LEFT 1 Initialize W[i] as follows: W[i] = (W[i-6] XOR W[i-16] XOR W[i-28] XOR W[i-32]) ROTATE-LEFT 2 That means that 6 rounds could be vectorized at once, with no additional calculations, instead of just 3! This optimization is independent of Intel or any other microprocessor architecture, although the microprocessor has to support vectorization to use it, and exploits one of the weaknesses of SHA-1. Optimization: SSSE3 Intel SSSE3 makes use of 16 %xmm registers, each 128 bits wide. The 4 32-bit inputs to a round, W[i-6], W[i-16], W[i-28], W[i-32], all fit in one %xmm register. The following code snippet, from Max Locktyukhin's article, converted to ATT assembly syntax, computes 4 rounds in parallel with just a dozen or so SSSE3 instructions: movdqa W_minus_04, W_TMP pxor W_minus_28, W // W equals W[i-32:i-29] before XOR // W = W[i-32:i-29] ^ W[i-28:i-25] palignr $8, W_minus_08, W_TMP // W_TMP = W[i-6:i-3], combined from // W[i-4:i-1] and W[i-8:i-5] vectors pxor W_minus_16, W // W = (W[i-32:i-29] ^ W[i-28:i-25]) ^ W[i-16:i-13] pxor W_TMP, W // W = (W[i-32:i-29] ^ W[i-28:i-25] ^ W[i-16:i-13]) ^ W[i-6:i-3]) movdqa W, W_TMP // 4 dwords in W are rotated left by 2 psrld $30, W // rotate left by 2 W = (W >> 30) | (W << 2) pslld $2, W_TMP por W, W_TMP movdqa W_TMP, W // four new W values W[i:i+3] are now calculated paddd (K_XMM), W_TMP // adding 4 current round's values of K movdqa W_TMP, (WK(i)) // storing for downstream GPR instructions to read A window of the 32 previous results, W[i-1] to W[i-32] is saved in memory on the stack. This is best illustrated with a chart. Without vectorization, computing the rounds is like this (each "R" represents 1 round of SHA-1 computation): RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR With vectorization, 4 rounds can be computed in parallel: RRRRRRRRRRRRRRRRRRRR RRRRRRRRRRRRRRRRRRRR RRRRRRRRRRRRRRRRRRRR RRRRRRRRRRRRRRRRRRRR Optimization: AVX The new "Sandy Bridge" microprocessor architecture, which supports AVX, allows another interesting optimization. SSSE3 instructions have two operands, a input and an output. AVX allows three operands, two inputs and an output. In many cases two SSSE3 instructions can be combined into one AVX instruction. The difference is best illustrated with an example. Consider these two instructions from the snippet above: pxor W_minus_16, W // W = (W[i-32:i-29] ^ W[i-28:i-25]) ^ W[i-16:i-13] pxor W_TMP, W // W = (W[i-32:i-29] ^ W[i-28:i-25] ^ W[i-16:i-13]) ^ W[i-6:i-3]) With AVX they can be combined in one instruction: vpxor W_minus_16, W, W_TMP // W = (W[i-32:i-29] ^ W[i-28:i-25] ^ W[i-16:i-13]) ^ W[i-6:i-3]) This optimization is also in Solaris, although Sandy Bridge-based systems aren't widely available yet. As an exercise for the reader, AVX also has 256-bit media registers, %ymm0 - %ymm15 (a superset of 128-bit %xmm0 - %xmm15). Can %ymm registers be used to parallelize the code even more? Optimization: Solaris-specific In addition to using the Intel code described above, I performed other minor optimizations to the Solaris SHA-1 code: Increased the digest(1) and mac(1) command's buffer size from 4K to 64K, as previously done for decrypt(1) and encrypt(1). This size is well suited for ZFS file systems, but helps for other file systems as well. Optimized encode functions, which byte swap the input and output data, to copy/byte-swap 4 or 8 bytes at-a-time instead of 1 byte-at-a-time. Enhanced the Solaris mdb(1) and kmdb(1) debuggers to display all 16 %xmm and %ymm registers (mdb "$x" command). Previously they only displayed the first 8 that are available in 32-bit mode. Can't optimize if you can't debug :-). Changed the SHA-1 code to allow processing in "chunks" greater than 2 Gigabytes (64-bits) Performance I measured performance on a Sun Ultra 27 (which has a Nehalem-class Xeon 5500 Intel W3570 microprocessor @3.2GHz). Turbo mode is disabled for consistent performance measurement. Graphs are better than words and numbers, so here they are: The first graph shows the Solaris digest(1) command before and after the optimizations discussed here, contained in libmd(3LIB). I ran the digest command on a half GByte file in swapfs (/tmp) and execution time decreased from 1.35 seconds to 0.98 seconds. The second graph shows the the results of an internal microbenchmark that uses the Solaris libpkcs11(3LIB) library. The operations are on a 128 byte buffer with 10,000 iterations. The results show operations increased from 320,000 to 416,000 operations per second. Finally the third graph shows the results of an internal kernel microbenchmark that uses the Solaris /kernel/crypto/amd64/sha1 module. The operations are on a 64Kbyte buffer with 100 iterations. third graph shows the results of an internal kernel microbenchmark that uses the Solaris /kernel/crypto/amd64/sha1 module. The operations are on a 64Kbyte buffer with 100 iterations. The results show for 1 kernel thread, operations increased from 410 to 600 MBytes/second. For 8 kernel threads, operations increase from 1540 to 1940 MBytes/second. Availability This code is in Solaris 11 FCS. It is available in the 64-bit libmd(3LIB) library for 64-bit programs and is in the Solaris kernel. You must be running hardware that supports Intel's SSSE3 instructions (for example, Intel Nehalem, Westmere, or Sandy Bridge microprocessor architectures). The easiest way to determine if SSSE3 is available is with the isainfo(1) command. For example, nehalem $ isainfo -v $ isainfo -v 64-bit amd64 applications sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu 32-bit i386 applications sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov sep cx8 tsc fpu If the output also shows "avx", the Solaris executes the even-more optimized 3-operand AVX instructions for SHA-1 mentioned above: sandybridge $ isainfo -v 64-bit amd64 applications avx xsave pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu 32-bit i386 applications avx xsave pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov sep cx8 tsc fpu No special configuration or setup is needed to take advantage of this code. Solaris libraries and kernel automatically determine if it's running on SSSE3 or AVX-capable machines and execute the correctly-tuned code for that microprocessor. Summary The Solaris 11 Crypto Framework, via the sha1 kernel module and libmd(3LIB) and libpkcs11(3LIB) libraries, incorporated a useful SHA-1 optimization from Intel for SSSE3-capable microprocessors. As with other Solaris optimizations, they come automatically "under the hood" with the current Solaris release. References "Improving the Performance of the Secure Hash Algorithm (SHA-1)" by Max Locktyukhin (Intel, March 2010). The source for these SHA-1 optimizations used in Solaris "SHA-1", Wikipedia Good overview of SHA-1 FIPS 180-1 SHA-1 standard (FIPS, 1995) NIST Comments on Cryptanalytic Attacks on SHA-1 (2005, revised 2006)

    Read the article

  • How to Change the Default Application for Android Tasks

    - by Jason Fitzpatrick
    When it comes time to switch from using one application to another on your Android device it isn’t immediately clear how to do so. Follow along as we walk you through swapping the default application for any Android task. Initially changing the default application in Android is a snap. After you install the new application (new web browser, new messaging tool, new whatever) Android prompts you to pick which application (the new or the old) you wish to use for that task the first time you attempt to open a web page, check your text message, or otherwise trigger the event. Easy! What about when it comes time to uninstall the app or just change back to your old app? There’s no helpful pop-up dialog box for that. Read on as we show you how to swap out any default application for any other with a minimum of fuss. Latest Features How-To Geek ETC How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally Now Together and Complete – McBain: The Movie [Simpsons Video] Be Creative by Using Hex and RGB Codes for Crayola Crayon Colors on Your Next Web or Art Project [Geek Fun] Flash Updates; Finally Supports Full Screen Video on Multiple Monitors 22 Ways to Recycle an Altoids Mint Tin Make Your Desktop Go Native with the Tribal Arts Theme for Windows 7 A History of Vintage Transformers: Decepticons Edition [Infographic]

    Read the article

  • How to set Alpha value from pixel shader in SlimDX Direct3d9

    - by Yashwinder
    I am trying to set alpha value of color as color.a = 0.5f in my pixel shader but all the time it is giving an exception. I can set color.r, color.g, color.b but it is not allowing me to set color.a and throwing an exception D3DERR_INVALIDCALL: Invalid call (-2005530516). I have just created a direct3d9 device and assigned my pixel shader to it. My pixel shader code is as below sampler2D ourImage : register(s0); float4 main(float2 locationInSource : TEXCOORD) : COLOR { float4 color = tex2D( ourImage , locationInSource.xy); color.a = 0.2; return color; } I am creating my pixel shader as byte[] byteCode = GiveFxFile(transitionEffect.PixelShaderFileName); var shaderBytecode = ShaderBytecode.Compile(byteCode, "main", "ps_2_0", ShaderFlags.None); var pixelShader = new PixelShader(device, ShaderBytecode); _device.PixelShader=pixelShader; I have initialized my device as var _presentParams = new PresentParameters { Windowed = _isWindowedMode, BackBufferWidth = (int)SystemParameters.PrimaryScreenWidth, BackBufferHeight = (int)SystemParameters.PrimaryScreenHeight, // Enable Z-Buffer // This is not really needed in this sample but real applications generaly use it EnableAutoDepthStencil = true, AutoDepthStencilFormat = Format.D16, // How to swap backbuffer in front and how many per screen refresh BackBufferCount = 1, SwapEffect = SwapEffect.Copy, BackBufferFormat = _direct3D.Adapters[0].CurrentDisplayMode.Format, PresentationInterval = PresentInterval.Immediate, DeviceWindowHandle = _windowHandle }; _device = new Device(_direct3D, 0, DeviceType.Hardware, _windowHandle, deviceFlags | CreateFlags.Multithreaded, _presentParams);

    Read the article

  • UEFI/GPT Win 7 Load Failure in Dual Boot and no GRUB2 [Ubuntu 12.04]

    - by cristian_jordache
    Configuration: MBB: ASRock X79 Extreme6 Win 7 installed on a INTEL 40GB SSD (GPT partitioned) Ubuntu 14.04 on a CORSAIR 30GB SSD (Ext4 and SWAP) I had Windows 7 installed previously in UEFI mode, using 3 partitions (GPT) and works fine if left alone. In UEFI BIOS settings I can see sometimes a "Windows Boot Manager" and other times (?) a "UEFI Intel" entry for INTEL HDD and Windows will boot properly selecting the one available at that time. I installed Ubuntu 14.04 after Win 7 w/o changing any UEFI BIOS settings and it works fine only if the BIOS is set w/ the Ubuntu partition as the first drive to boot, in AHCI mode. If both SSD drives are connected, the Win7 Intel boot drive can be chosen as first boot device but only as an "AHCI Intel drive" (No "Windows Boot Manager" nor "UEFI Intel device" options available in BIOS Boot menu) and Win7 will not load properly as long as the Ubuntu Crucial SSD is NOT PHYSICALLY DISCONNECTED. Windows will try, start booting for few seconds but will fail replacing Win7 logo and that startup animation with w/ the "old" white progress bar and then and will notify that there is a issue and prompt the user to try to Load Win 7 in Normal Mode again or try a Recovery Mode to fix it. If I let Windows INTEL HDD boot via BIOS/UEFI - Windows Boot manager selection, I may see the purple screen of Grub2 loaded for a while, but there's no selection for Ubuntu or Windows and/or then machine is not booting, showing a black screen and a small command prompt cursor blinking on top. So far the only option I see to have Ubuntu boot side by side w/ Win 7 is to reformat the Win7 SDD and set it boot in legacy BIOS mode with a MBR instead of GPT. Per my understanding this is a quite complex issue to fix (Rod Smith's answer was pretty helpful: UEFI boot on my Asus k52f) but any other suggestions are welcome. I find a bit odd that I can boot properly Windows7 SSD or an Ubuntu DVD using a DVD drive set in UEFI-BIOS in "AHCI mode" and w/ using "UEFI/Windows Boot Manager" booting option but I cannot boot a secondary SSD-HDD w/ Ubuntu having the same BIOS/UEFI Boot configuration. Looks like plugging the second SSD [the Ubuntu partition] is interfering with boot options in UEFI-BIOS.

    Read the article

  • How to stop Cairo Dock minimizing Conky on Show Desktop?

    - by César
    Every time I use Cairo Dock Show Desktop add-on Conky minimizes: I've read about the own_window_type override option on .conkyrc and it seems to work for some people but it doesn't work for me. Conky won't show up if I use this option (it is currently set to own_window_type normal). Any suggestions? .conkyrc # Conky settings # background no update_interval 1 cpu_avg_samples 2 net_avg_samples 2 override_utf8_locale yes double_buffer yes no_buffers yes text_buffer_size 2048 #imlib_cache_size 0 temperature_unit fahrenheit # Window specifications # own_window yes own_window_type normal own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 minimum_size 200 250 maximum_width 200 alignment tr gap_x 35 gap_y 55 # Graphics settings # draw_shades no draw_outline no draw_borders no draw_graph_borders no # Text settings # use_xft yes override_utf8_locale yes xftfont Neuropolitical:size=8 xftalpha 0.8 uppercase no temperature_unit celsius default_color FFFFFF # Lua Load # lua_load ~/.lua/scripts/clock_rings.lua lua_draw_hook_pre clock_rings TEXT ${font Neuropolitical:size=42}${time %e} ${goto 100}${font Neuropolitical:size=18}${color FF3300}${voffset -75}${time %b} ${font Neuropolitical:size=10}${color FF3300}${voffset 15}${time %A}${color FF3300}${hr} ${goto 100}${font Neuropolitical:size=15}${color FFFFFF}${voffset -35}${time %Y} ${font Neuropolitical:size=30}${voffset 40}${alignc}${time %H}:${time %M} ${goto 175}${voffset -30}${font Neuropolitical:size=10}${time %S} ${voffset 10}${font Neuropolitical:size=11}${color FF3300}${alignr}HOME${font} ${font Neuropolitical:size=13}${color FFFFFF}${alignr}temp: ${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LQBK temperature temperature 30} °C${font} ${hr} ${image ~/.conky/logo.png -p 165,10 -s 35x35} ${color FFFFFF}${font Neuropolitical:size=8}Uptime: ${uptime_short} ${color FFFFFF}${font Neuropolitical:size=8}Processes: ${processes} ${color FFFFFF}${font Neuropolitical:size=8}Running: ${running_processes} ${color FF3300}${goto 125}${voffset 27}CPU ${color FFFFFF}${goto 125}${cpu cpu0}% ${color FF3300}${goto 125}${voffset 55}RAM ${color FFFFFF}${goto 125}${memperc}% ${color FF3300}${goto 125}${voffset 56}Swap ${color FFFFFF}${goto 125}${swapperc}% ${color FF3300}${goto 125}${voffset 57}Disk ${color FFFFFF}${goto 125}${fs_used_perc /}% ${color FF3300}${goto 130}${voffset 55}Net ${color FFFFFF}${goto 130}${downspeed eth0} ${color FFFFFF}${goto 130}${upspeed eth0} ${color FF3300}${font Neuropolitical:size=8}${alignr}${nodename} ${color FF3300}${font Neuropolitical:size=8}${alignr}${pre_exec cat /etc/issue.net} $machine ${color FF3300}${font Neuropolitical:size=8}${alignr}Kernel: ${kernel} ${hr}

    Read the article

  • Is 1GB RAM with integrated graphics sufficient for Unity 3D on 12.04?

    - by Anwar Shah
    I have been using Ubuntu since Hardy Heron (8.04). I used Natty, Oneiric with Unity. But When I recently (more than 1 month now) upgraded My Ubuntu to Precise (12.04), the performance of my laptop is not satisfactory. It is too unresponsive compared to older releases. For example, the Unity in 12.04 is very unresponsive. Sometimes, it requires 2 seconds to show up the dash (which was not the case with Natty, though people always saying that Natty's version of Unity is buggiest). I am assuming that, May be my 1GB RAM now becomes too low to run Unity of Precise. But I also think, Since Unity is improved in Precise, It may not be the case. So, I am not sure. Do you have any ideas? Will upgrading RAM fix it? How much I need if upgrade is required? Laptop model: "Lenovo 3000 Y410" Graphic : "Intel GMA X3100" on Intel 965GM Chipset. RAM/Memory : "1 GB DDR2" (1 slot empty). Swap space : 1.1GB Resolution: 1280x800 widescreen Shared RAM for Graphics: 256 MB as below output suggests $ dmesg | grep AGP [ 0.825548] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000

    Read the article

  • Poor System performance on my machine running Ubuntu 12.04(Beta 2 updated to the present moment)

    - by Mohammad Kamil Nadeem
    Why is it that my system dies when multitasking(it is happening from 11.10) on Ubuntu11.10(Unity), Kubuntu 11.10(KDE) and Deepin Linux which is based on 11.10(Gnome-Shell) The thing is that I thought with 12.04 I would get performance like I used to get on 11.04 on which everything used to run fine without any lag or hiccups. The same lagging(Browser starts to stutter, increased delay in the launching of dash and applications)is happening on 12.04 http://i.imgur.com/YChKB.png and http://i.imgur.com/uyXLA.png . I believe that my system configuration is sufficient for running Ubuntu as you can check here http://paste.ubuntu.com/929734/ . I had the Google voice and chat plugin installed on 12.04 so someone suggested that I should remove that and see if the performance improves but no such respite(I am having this on multiple operating system based on Ubuntu 11.10 as I have mentioned above). On a friends suggestion Ran Memory Test through Partition Magic and my system passed that fine. One thing more that I would like to know is that why when I have 2Gb Ram and 2.1GB swap does my system starts lag and run poorly when Ram consumption goes 500+. If you require anymore information I will gladly provide it.

    Read the article

  • Diagnosing xmodmap errors

    - by intuited
    I'm getting this error when trying to use xmodmap to get rid of caps lock: $ xmodmap -e 'clear Lock' X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 118 (X_SetModifierMapping) Value in failed request: 0x17 Serial number of failed request: 8 Current serial number in output stream: 8 I'm running xfce on Maverick "10.10" Meercat. This problem did not occur before I added the Keyboard Layouts applet to a panel; before doing that, I was able to run my xmodmap script to swap Esc and CapsLock: !Remap Caps_Lock as Escape remove Lock = Caps_Lock keysym Caps_Lock = Escape It may be relevant that I chose alt-capslock as the keyboard switch combo in the Keyboard Layouts preferences. I've had a similar problem before, on a different machine, running openbox. On that machine, this problem started when I upgraded to Lucid, and has persisted in Maverick (release 10.10). I reported a bug in xorg. However, it remains unclear whether it's really a problem with xorg, or if I'm just doing something wrong with my configuration. Have other people experienced this problem? Can someone shed some light on what's going on here? It seems there are quite a few layers involved, and I don't understand any of them particularly well, so any information would be helpful. update I've discovered that the problem is specifically triggered by adding the Canada layout variant "Multilingual" (ca-multix). If I instead add the variant "Multilingual (first part)", the problem does not occur. I think this will probably end up being a usable workaround, but I don't yet know what the difference between these variants is. I've filed a freedesktop issue, and am commenting on a related ubuntu issue.

    Read the article

  • Fix corrupt NTFS partition without Windows

    - by Capt.Nemo
    MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

    Read the article

  • How to format FAT32 filesystem infected with windows virus and that is write protected

    - by explorex
    Hi, I have a pendrive with FAT32 filesystem. it is infected with virus dont know which but has autorun.inf and create exe file within folder. I tried to format it with various filesystems and even try to delete it with GParted but couldn't because it says it is write protected i can't even delete files. How to format it? user@explorerx:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbd04bd04 Device Boot Start End Blocks Id System /dev/sda1 * 1 498 3998720 82 Linux swap / Solaris Partition 1 does not end on cylinder boundary. /dev/sda2 499 19457 152287585+ f W95 Ext'd (LBA) /dev/sda5 5100 10198 40957686 7 HPFS/NTFS /dev/sda6 10199 14787 36861111 7 HPFS/NTFS /dev/sda7 14788 19457 37511743+ 7 HPFS/NTFS /dev/sda8 499 5099 36956160 83 Linux Partition table entries are not in disk order Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc13bc13b Device Boot Start End Blocks Id System /dev/sdc1 1 9729 78143488 7 HPFS/NTFS /dev/sdc2 9729 19457 78143488 7 HPFS/NTFS Disk /dev/sdb: 4194 MB, 4194304000 bytes 112 heads, 47 sectors/track, 1556 cylinders Units = cylinders of 5264 * 512 = 2695168 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 2 1557 4091904 b W95 FAT32

    Read the article

  • Trying to format drive fails

    - by david
    since I will be doing an internship for which i need to use Windows software, I have decided to ruin my day trying to remove my Ubuntu 12.04, install Win XP SP3 (since the DualBoot theme from ubuntu suggests to first install Windows and then Ubuntu, for problems with the bootloader if you do it the other way around) and then reinstall Ubuntu 12.04 since I would like to keep using it as my primary operating system, using WinXP exclusively for the internship. Other than that, I would like to have a partition for the data, which can be used by both Ubuntu and Windows. So now, I have used the disk utility run from an ubuntu-live cd to format my drive with Master Boot Record (being conscious of the fact that this way I will lose all my data, which I have saved on an external drive before, and that my Ubuntu won't work anymore afterwards), creating partitions for Windows (NTFS), personal data (FAT, since as far as I know both Ubuntu and Windows can deal with this), a Swap partition for Linux, and one partition for Ubuntu (ext4); trying to install Win XP from cd gives me a blue screen, which stops the setup and telling me to remove all recently installed drives and to run CHKDSK. So I thought, that maybe Windows doesn't like pre-partitioned drives for its installation and thus I need to re-format my hard drive in order to have a completely "new" drive, which I can then, during the Windows-installation, partition in order to create the partitions I need. Trying to do this, though, the disk-utility run from the live-CD gives me this warning: Error creating partition table: helper exited with exit code 1: In part_create_partition_table: device_file=/dev/sda, scheme=0 got it got disk committed to disk BLKRRPART ioctl failed for /dev/sda: Device or resource busy I do not understand why it tells me that the hard-drive is busy, because, as stated above, I am doing all this from a live-CD. Thus, my questions are: How can I resolve the error given by the disk utility? Does it make sense to use four partitions in the way mentioned above? And if not so, which partitions should I create? Can I, theoretically, partition my drive from an Ubuntu live-cd in order to create the partitions I want and to install first Windows and then Ubuntu? Thanks for any help, David

    Read the article

  • Which Ubuntu version to use on a MAXDATA laptop Eco 3100X ? with this system info

    - by Erjet Malaj
    i am speaking as new ubuntu user, i just have installed ubuntu 10.04 on my laptop, but is running very slow... So i am here to ask you a question: WHich ubuntu version can fit for my laptop MAXDATA Eco 3100x, . My Laptop System Information are: SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 10.04 (lucid) release. GNOME: 2.30.2 (Ubuntu 2010-06-25) Kernel version: 2.6.32-40-generic (#87-Ubuntu SMP Mon Mar 5 20:26:31 UTC 2012) GCC: 4.4.3 (i486-linux-gnu) Xorg: unknown (25 February 2012 06:59:39AM) (25 February 2012 06:59:39AM) Hostname: lotus-laptop Uptime: 0 days 1 h 6 min CPU INFORMATION GenuineIntel, Intel(R) Pentium(R) 4 CPU 2.40GHz Number of CPUs: 1 CPU clock currently at 2390.561 MHz with 512 KB cache Numbering: family(15) model(2) stepping(7) Bogomips: 4781.12 Flags: fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid MEMORY INFORMATION Total memory: 228 MB Total swap: 455 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: IBM-DJSA-210 SCSI device - scsi1 Vendor: TOSHIBA Model: DVD-ROM SD-C2502 HARDWARE INFORMATION MOTHERBOARD Host bridge Silicon Integrated Systems [SiS] 650/M650 Host (rev 11) PCI bridge(s) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) USB controller(s) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) ISA bridge Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04) IDE interface Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Silicon Integrated Systems [SiS] 5513 [IDE] GRAPHIC CARD VGA controller Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter Subsystem: Uniwill Computer Corp Device 5103 SOUND CARD Multimedia controller Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) Subsystem: Uniwill Computer Corp Device 5203 NETWORK Ethernet controller Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Uniwill Computer Corp Device 5002 Modem Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) Subsystem: Uniwill Computer Corp Device 4003 Thanks you asap. :-) E

    Read the article

  • How can I make fsck run non-interactively at boot time?

    - by Nelson
    I have a headless Ubuntu 12.04 server in a datacenter 1500 miles away. Twice now on reboot the system decided it had to fsck. Unfortunately Ubuntu ran fsck in interactive mode, so I had to ask someone at my datacenter to go over, plug in a console, and press the Y key. How do I set it up so that fsck runs in non-interactive mode at boot time with the -y or -p (aka -a) flag? If I understand Ubuntu's boot process correctly, init invokes mountall which in turn invokes fsck. However I don't see any way to configure how fsck is invoked. Is this possible? (To head off one suggestion; I'm aware I can use tune2fs -i 0 -c 0 to prevent periodic fscks. That may help a little but I need the system to try to come back up even if it had a real reason to fsck, say after a power failure.) In response to followup questions, here's the pertinent details of my /etc/fstab. I don't believe I've edited this at all from what Ubuntu put there. UUID=3515461e-d425-4525-a07d-da986d2d7e04 / ext4 errors=remount-ro 0 1 UUID=90908358-b147-42e2-8235-38c8119f15a6 /boot ext4 defaults 0 2 UUID=01f67147-9117-4229-9b98-e97fa526bfc0 none swap sw 0 0

    Read the article

  • How should I configure TRIM Support for LVM logical volumes?

    - by Zack Perry
    I am setting up a notebook for software demo purpose. The machine has a Intel Core i7 CPU, 8GB RAM, a 128GB SSD, and runs Ubuntu 12.04 LTS 64bit desktop. As it is, the SSD is configured to have a single volume group, with /boot, /swap, and / all in their respective logical volumes. They collectively consume 30GB space. I plan to use the remaining for logical volumes for KVM guests, all run Ubuntu 12.04 Server I would like to ensure that the SSD is utilized optimally. Although on this site, there are some great info about setting up TRIM support for file system setups that do not involve LVM, I have not found explicit guide regarding my planned setup. I did found this page which talks about adding issue_discards in /etc/lvm/lvm.conf. But in said file on my machine, I didn't find the cited content. I double-checked man lvm.conf(5), didn't see any mentioning of this option either. Thus, I'm not sure what to do. Furthermore, even say adding the option is the right thing to do, should I in my machine's /etc/fstab still add mount options such as noatime etc? Any tips, pointers, and/or further guidance are greatly appreciated.

    Read the article

  • Disk space suddenly 100% used?

    - by dannymcc
    I'm trying to identify why, suddenly, 100% of our disk space is in use. I have already rebooted but the issue persists. Here are the outputs of some commands that are showing some strange (for me) results: danny@hydrogen:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p1 130G 122G 949M 100% / none 1.9G 196K 1.9G 1% /dev none 2.0G 0 2.0G 0% /dev/shm none 2.0G 40K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw danny@hydrogen:/$ sudo du -chs / du: cannot access `/proc/1662/task/1662/fd/4': No such file or directory du: cannot access `/proc/1662/task/1662/fdinfo/4': No such file or directory du: cannot access `/proc/1662/fd/4': No such file or directory du: cannot access `/proc/1662/fdinfo/4': No such file or directory danny@hydrogen:/$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/cciss/c0d0p1 135342296 128144108 323104 100% / none 1991336 196 1991140 1% /dev none 1995788 0 1995788 0% /dev/shm none 1995788 40 1995748 1% /var/run none 1995788 0 1995788 0% /var/lock none 1995788 0 1995788 0% /lib/init/rw danny@hydrogen:/$ mount /dev/cciss/c0d0p1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) danny@hydrogen:/$ sudo du -h --max-depth=1 634M ./premvet_sync 5.6M ./etc 4.0K ./opt 16K ./lost+found 7.4M ./bin 623M ./lib 196K ./dev 0 ./sys 4.0K ./srv 4.0K ./cdrom 8.0K ./media 52K ./tmp ... it hangs for ages here..... The server is running Ubuntu 10.04.4 LTS. System load: 2.85 Temperature: 8 C Usage of /: 94.7% of 129.07GB Processes: 132 Memory usage: 39% Users logged in: 0 Swap usage: 0% IP address for eth0: 192.168.1.124 => / is using 94.7% of 129.07GB I'm struggling to comprehend why this is happening! Any pointers would be appreciated.

    Read the article

  • Juju Openstack bundle: Can't launch an instance

    - by user281985
    Deployed bundle:~makyo/openstack/2/openstack, on top of 7 physical boxes and 3 virtual ones. After changing vip_iface strings to point to right devices, e.g., br0 instead of eth0, and defining "/mnt/loopback|30G", in Cinder's block-device string, am able to navigate through openstack dashboard, error free. Following http://docs.openstack.org/grizzly/openstack-compute/install/apt/content/running-an-instance.html instructions, attempted to launch cirros 0.3.1 image; however, novalist shows the instance in error state. ubuntu@node7:~$ nova --debug boot --flavor 1 --image 28bed1bc-bc1c-4533-beee-8e0428ad40dd --key_name key2 --security_group default cirros REQ: curl -i http://keyStone.IP:5000/v2.0/tokens -X POST -H "Content-Type: application/json" -H "Accept: application/json" -H "User-Agent: python-novaclient" -d '{"auth": {"tenantName": "admin", "passwordCredentials": {"username": "admin", "password": "openstack"}}}' INFO (connectionpool:191) Starting new HTTP connection (1): keyStone.IP DEBUG (connectionpool:283) "POST /v2.0/tokens HTTP/1.1" 200 None RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:02 GMT', 'transfer-encoding': 'chunked', 'vary': 'X-Auth-Token', 'content-type': 'application/json'} RESP BODY: {"access": {"token": {"expires": "2014-06-11T00:01:02Z", "id": "3eefa1837d984426a633fe09259a1534", "tenant": {"description": "Created by Juju", "enabled": true, "id": "08cff06d13b74492b780d9ceed699239", "name": "admin"}}, "serviceCatalog": [{"endpoints": [{"adminURL": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239", "publicURL": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239"}], "endpoints_links": [], "type": "compute", "name": "nova"}, {"endpoints": [{"adminURL": "http://nova.cloud.controller:9696", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:9696", "publicURL": "http://nova.cloud.controller:9696"}], "endpoints_links": [], "type": "network", "name": "quantum"}, {"endpoints": [{"adminURL": "http://nova.cloud.controller:3333", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:3333", "publicURL": "http://nova.cloud.controller:3333"}], "endpoints_links": [], "type": "s3", "name": "s3"}, {"endpoints": [{"adminURL": "http://i.p.s.36:9292", "region": "RegionOne", "internalURL": "http://i.p.s.36:9292", "publicURL": "http://i.p.s.36:9292"}], "endpoints_links": [], "type": "image", "name": "glance"}, {"endpoints": [{"adminURL": "http://i.p.s.39:8776/v1/08cff06d13b74492b780d9ceed699239", "region": "RegionOne", "internalURL": "http://i.p.s.39:8776/v1/08cff06d13b74492b780d9ceed699239", "publicURL": "http://i.p.s.39:8776/v1/08cff06d13b74492b780d9ceed699239"}], "endpoints_links": [], "type": "volume", "name": "cinder"}, {"endpoints": [{"adminURL": "http://nova.cloud.controller:8773/services/Cloud", "region": "RegionOne", "internalURL": "http://nova.cloud.controller:8773/services/Cloud", "publicURL": "http://nova.cloud.controller:8773/services/Cloud"}], "endpoints_links": [], "type": "ec2", "name": "ec2"}, {"endpoints": [{"adminURL": "http://keyStone.IP:35357/v2.0", "region": "RegionOne", "internalURL": "http://keyStone.IP:5000/v2.0", "publicURL": "http://i.p.s.44:5000/v2.0"}], "endpoints_links": [], "type": "identity", "name": "keystone"}], "user": {"username": "admin", "roles_links": [], "id": "b3730a52a32e40f0a9500440d1ef1c7d", "roles": [{"id": "e020001eb9a049f4a16540238ab158aa", "name": "Admin"}, {"id": "b84fbff4d5554d53bbbffdaad66b56cb", "name": "KeystoneServiceAdmin"}, {"id": "129c8b49d42b4f0796109aaef2069aa9", "name": "KeystoneAdmin"}], "name": "admin"}}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd HTTP/1.1" 200 719 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:03 GMT', 'x-compute-request-id': 'req-7f3459f8-d3d5-47f1-97a3-8407a4419a69', 'content-type': 'application/json', 'content-length': '719'} RESP BODY: {"image": {"status": "ACTIVE", "updated": "2014-06-09T22:17:54Z", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "bookmark"}, {"href": "http://External.Public.Port:9292/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "type": "application/vnd.openstack.image", "rel": "alternate"}], "id": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "OS-EXT-IMG-SIZE:size": 13147648, "name": "Cirros 0.3.1", "created": "2014-06-09T22:17:54Z", "minDisk": 0, "progress": 100, "minRam": 0, "metadata": {}}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 HTTP/1.1" 200 418 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:04 GMT', 'x-compute-request-id': 'req-2c153110-6969-4f3a-b51c-8f1a6ce75bee', 'content-type': 'application/json', 'content-length': '418'} RESP BODY: {"flavor": {"name": "m1.tiny", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "bookmark"}], "ram": 512, "OS-FLV-DISABLED:disabled": false, "vcpus": 1, "swap": "", "os-flavor-access:is_public": true, "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 0, "disk": 0, "id": "1"}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers -X POST -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Content-Type: application/json" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" -d '{"server": {"name": "cirros", "imageRef": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "key_name": "key2", "flavorRef": "1", "max_count": 1, "min_count": 1, "security_groups": [{"name": "default"}]}}' INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "POST /v1.1/08cff06d13b74492b780d9ceed699239/servers HTTP/1.1" 202 436 RESP: [202] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-41e53086-6454-4efb-bb35-a30dc2c780be', 'content-type': 'application/json', 'location': 'http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43', 'content-length': '436'} RESP BODY: {"server": {"security_groups": [{"name": "default"}], "OS-DCF:diskConfig": "MANUAL", "id": "2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "bookmark"}], "adminPass": "oFRbvRqif2C8"}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43 -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43 HTTP/1.1" 200 1349 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-d91d0858-7030-469d-8e55-40e05e4d00fd', 'content-type': 'application/json', 'content-length': '1349'} RESP BODY: {"server": {"status": "BUILD", "updated": "2014-06-10T00:01:05Z", "hostId": "", "OS-EXT-SRV-ATTR:host": null, "addresses": {}, "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/servers/2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "rel": "bookmark"}], "key_name": "key2", "image": {"id": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "links": [{"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "bookmark"}]}, "OS-EXT-STS:task_state": "scheduling", "OS-EXT-STS:vm_state": "building", "OS-EXT-SRV-ATTR:instance_name": "instance-00000004", "OS-EXT-SRV-ATTR:hypervisor_hostname": null, "flavor": {"id": "1", "links": [{"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "bookmark"}]}, "id": "2eb5e3ad-3044-41c1-bbb7-10f398f83e43", "security_groups": [{"name": "default"}], "OS-EXT-AZ:availability_zone": "nova", "user_id": "b3730a52a32e40f0a9500440d1ef1c7d", "name": "cirros", "created": "2014-06-10T00:01:04Z", "tenant_id": "08cff06d13b74492b780d9ceed699239", "OS-DCF:diskConfig": "MANUAL", "accessIPv4": "", "accessIPv6": "", "progress": 0, "OS-EXT-STS:power_state": 0, "config_drive": "", "metadata": {}}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/flavors/1 HTTP/1.1" 200 418 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-896c0120-1102-4408-9e09-cd628f2dd699', 'content-type': 'application/json', 'content-length': '418'} RESP BODY: {"flavor": {"name": "m1.tiny", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/flavors/1", "rel": "bookmark"}], "ram": 512, "OS-FLV-DISABLED:disabled": false, "vcpus": 1, "swap": "", "os-flavor-access:is_public": true, "rxtx_factor": 1.0, "OS-FLV-EXT-DATA:ephemeral": 0, "disk": 0, "id": "1"}} REQ: curl -i http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd -X GET -H "X-Auth-Project-Id: admin" -H "User-Agent: python-novaclient" -H "Accept: application/json" -H "X-Auth-Token: 3eefa1837d984426a633fe09259a1534" INFO (connectionpool:191) Starting new HTTP connection (1): nova.cloud.controller DEBUG (connectionpool:283) "GET /v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd HTTP/1.1" 200 719 RESP: [200] {'date': 'Tue, 10 Jun 2014 00:01:05 GMT', 'x-compute-request-id': 'req-454e9651-c247-4d31-8049-6b254de050ae', 'content-type': 'application/json', 'content-length': '719'} RESP BODY: {"image": {"status": "ACTIVE", "updated": "2014-06-09T22:17:54Z", "links": [{"href": "http://nova.cloud.controller:8774/v1.1/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "self"}, {"href": "http://nova.cloud.controller:8774/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "rel": "bookmark"}, {"href": "http://External.Public.Port:9292/08cff06d13b74492b780d9ceed699239/images/28bed1bc-bc1c-4533-beee-8e0428ad40dd", "type": "application/vnd.openstack.image", "rel": "alternate"}], "id": "28bed1bc-bc1c-4533-beee-8e0428ad40dd", "OS-EXT-IMG-SIZE:size": 13147648, "name": "Cirros 0.3.1", "created": "2014-06-09T22:17:54Z", "minDisk": 0, "progress": 100, "minRam": 0, "metadata": {}}} +-------------------------------------+--------------------------------------+ | Property | Value | +-------------------------------------+--------------------------------------+ | OS-EXT-STS:task_state | scheduling | | image | Cirros 0.3.1 | | OS-EXT-STS:vm_state | building | | OS-EXT-SRV-ATTR:instance_name | instance-00000004 | | flavor | m1.tiny | | id | 2eb5e3ad-3044-41c1-bbb7-10f398f83e43 | | security_groups | [{u'name': u'default'}] | | user_id | b3730a52a32e40f0a9500440d1ef1c7d | | OS-DCF:diskConfig | MANUAL | | accessIPv4 | | | accessIPv6 | | | progress | 0 | | OS-EXT-STS:power_state | 0 | | OS-EXT-AZ:availability_zone | nova | | config_drive | | | status | BUILD | | updated | 2014-06-10T00:01:05Z | | hostId | | | OS-EXT-SRV-ATTR:host | None | | key_name | key2 | | OS-EXT-SRV-ATTR:hypervisor_hostname | None | | name | cirros | | adminPass | oFRbvRqif2C8 | | tenant_id | 08cff06d13b74492b780d9ceed699239 | | created | 2014-06-10T00:01:04Z | | metadata | {} | +-------------------------------------+--------------------------------------+ ubuntu@node7:~$ ubuntu@node7:~$ nova list +--------------------------------------+--------+--------+----------+ | ID | Name | Status | Networks | +--------------------------------------+--------+--------+----------+ | 2eb5e3ad-3044-41c1-bbb7-10f398f83e43 | cirros | ERROR | | +--------------------------------------+--------+--------+----------+ ubuntu@node7:~$ var/log/nova/nova-compute.log shows the following error: ... 2014-06-10 00:01:06.048 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Attempting claim: memory 512 MB, disk 0 GB, VCPUs 1 2014-06-10 00:01:06.049 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Total Memory: 3885 MB, used: 512 MB 2014-06-10 00:01:06.049 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Memory limit: 5827 MB, free: 5315 MB 2014-06-10 00:01:06.049 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Total Disk: 146 GB, used: 0 GB 2014-06-10 00:01:06.050 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Disk limit not specified, defaulting to unlimited 2014-06-10 00:01:06.050 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Total CPU: 2 VCPUs, used: 0 VCPUs 2014-06-10 00:01:06.050 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] CPU limit not specified, defaulting to unlimited 2014-06-10 00:01:06.051 AUDIT nova.compute.claims [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Claim successful 2014-06-10 00:01:06.963 WARNING nova.network.quantumv2.api [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] No network configured! 2014-06-10 00:01:08.347 ERROR nova.compute.manager [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Instance failed to spawn 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Traceback (most recent call last): 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 1118, in _spawn 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] self._legacy_nw_info(network_info), 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 703, in _legacy_nw_info 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] network_info = network_info.legacy() 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] AttributeError: 'list' object has no attribute 'legacy' 2014-06-10 00:01:08.347 32223 TRACE nova.compute.manager [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] 2014-06-10 00:01:08.919 AUDIT nova.compute.manager [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Terminating instance 2014-06-10 00:01:09.712 32223 ERROR nova.virt.libvirt.driver [-] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] During wait destroy, instance disappeared. 2014-06-10 00:01:09.718 INFO nova.virt.libvirt.firewall [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Attempted to unfilter instance which is not filtered 2014-06-10 00:01:09.719 INFO nova.virt.libvirt.driver [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Deleting instance files /var/lib/nova/instances/2eb5e3ad-3044-41c1-bbb7-10f398f83e43 2014-06-10 00:01:10.044 ERROR nova.compute.manager [req-41e53086-6454-4efb-bb35-a30dc2c780be b3730a52a32e40f0a9500440d1ef1c7d 08cff06d13b74492b780d9ceed699239] [instance: 2eb5e3ad-3044-41c1-bbb7-10f398f83e43] Error: ['Traceback (most recent call last):\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 864, in _run_instance\n set_access_ip=set_access_ip)\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 1123, in _spawn\n LOG.exception(_(\'Instance failed to spawn\'), instance=instance)\n', ' File "/usr/lib/python2.7/contextlib.py", line 24, in __exit__\n self.gen.next()\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 1118, in _spawn\n self._legacy_nw_info(network_info),\n', ' File "/usr/lib/python2.7/dist-packages/nova/compute/manager.py", line 703, in _legacy_nw_info\n network_info = network_info.legacy()\n', "AttributeError: 'list' object has no attribute 'legacy'\n"] 2014-06-10 00:01:40.951 32223 AUDIT nova.compute.resource_tracker [-] Auditing locally available compute resources 2014-06-10 00:01:41.072 32223 AUDIT nova.compute.resource_tracker [-] Free ram (MB): 2861 2014-06-10 00:01:41.072 32223 AUDIT nova.compute.resource_tracker [-] Free disk (GB): 146 2014-06-10 00:01:41.073 32223 AUDIT nova.compute.resource_tracker [-] Free VCPUS: 1 2014-06-10 00:01:41.262 32223 INFO nova.compute.resource_tracker [-] Compute_service record updated for node5:node5.maas ... Can't seem to find any entries in quantum.conf related to "legacy". Any help would be appreciated. Cheers,

    Read the article

  • Attempting to dual boot Ubuntu and Windows 7 on Sony Vaio with Insyde H2O BIOS

    - by zach
    My situation is the same that is addressed here Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI and here http://www.hackourlife.com/sony-vaio-with-insyde-h2o-efi-bios-ubuntu-12-04-dual-boot I tried to install Ubuntu 12.04 from the Live CD alongside my current Windows 7. I have to switch my BIOS to legacy mode in order to boot from CD. If I were to do a normal installation and remain in legacy mode, the BIOS will display "operating system not found". If I switch back then the BIOS just boots to windows. To solve the problem, I tried following the steps in the previous two articles. My drive is partitioned as: sda1 FAT32 Location of Windows EFI files (flagged as boot in Ubuntu install) sda2 unknown sda3 NFTS Windows C: sda4 ext4 Ubuntu root sda5 swap sda6 ext4 Ubuntu home I was a little confused by the requirement in the second article to "be careful to install Grub bootloader in /dev/sda3" In my case, the relevant partition is sda1. I have tried three things: setting the sda1 mount point as /boot, as /boot/efi, and as the special reserved grub partition. In each install I indicated that grub should be installed in sda1. After each install I reboot to the live CD and look in the sda1. I see EFI/Boot and EFI/Windows, but no EFI/Ubuntu and consequently no grubx64.efi. I understand the recommended procedure of moving grubx64.efi into the EFI/Boot directory and replacing the present bootx64.efi file, but I see no grubx64.efi and I don't know where it should be.

    Read the article

  • Questions about Mac Book Pro Keyboard and shortcuts

    - by SimonSolnes
    I have been researching a lot about this and I cannot seem to find any useful information about this topic, what so ever. I have now been using Ubuntu in one week, and have gotten pretty confident with almost everything. Except keyboard layout and shortcuts. If you know a tutorial or a documents explaining keyboard shortcuts in Ubuntu or linux in general, can you please list it? I use a Mac Book Pro with a Norwegian keyboard, and I have several questions about this: Is there a program for having a consise list of absolutely all keyboard shortcuts, and be able to change them? How do I use my fn keys? (fn button doesnt do the job for some reason) How can I use my alt+letter-key-or-number-key or alt+shift+letter-key-or-number-key to get fancy characters. (Like I do on Mac OS X) How can I swap cmd and ctrl key system wide? Also I really want to be oriented around this subject, since this is the only thing holding me back on Ubuntu, so if there exists some in-depth material on this, it would be great. Also, if there exists some programs or material out there making it easier with Mac hardware I would enjoy that. Sorry if my questions seems vague. Thank you very much Simon

    Read the article

  • Google-Chrome 10 stable crash on every page

    - by Achu
    I installed google-chrome today, when i open any page including askubuntu i got this error message. i see my memory usage is normal(Memory 56% and swap 4.8%) also I reload and i go to another page same problem What is the problem? the last dmesg output [26612.341865] lo: Disabled Privacy Extensions [29651.852476] chrome[15472] general protection ip:1528e26 sp:7fff514a9dc0 error:0 in chrome[400000+3082000] [31447.190586] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=15939 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31451.250190] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16180 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31454.260150] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16322 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31458.648164] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16513 PROTO=UDP SPT=4243 DPT=161 LEN=49 [33124.300112] lo: Disabled Privacy Extensions [33601.021406] Skipping EDID probe due to cached edid [34594.043501] chrome[15746]: segfault at 0 ip 0000000000d5cdd0 sp 00007fff5149ec20 error 6 in chrome[400000+3082000] [34597.395334] chrome[18112] general protection ip:17c85bf sp:7fff514aa4f0 error:0 in chrome[400000+3082000] [34616.786643] chrome[18124]: segfault at 1007 ip 00000000017c849f sp 00007fff514aabd0 error 4 in chrome[400000+3082000] [37277.436207] lo: Disabled Privacy Extensions [38549.501390] e1000e: eth1 NIC Link is Down [38551.122253] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [38551.122263] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO

    Read the article

  • no disk space, cant use internet

    - by James
    after trying to install drivers using sudo apt-get update && sudo apt-get upgrade, im faced with a message saying no space left on device, i ran disk usage analyzer as root and there was three folders namely, main volume, home folder, and my 116gb hard drive (which is practically empty) yet both other folders are full, which is stopping me installing drivers because of space, how do i get ubuntu to use this space on my hard drive? its causing problems because i cant gain access to the internet as i cant download drivers when i havnt got enough space, this happens every time i try it sudo fdisk -l Disk /dev/sda: 120.0GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003eeed Device Boot Start End Blocks Id System /dev/sda1 * 2048 231315455 115656704 83 Linux /dev/sda2 231317502 234440703 1561601 5 Extended /dev/sda5 231317504 234440703 1561600 82 Linux swap / solaris Output of df -h df: '/media/ubuntu/FB18-ED76': No such file or directory Filesysytem Size Used Avail Use% Mounted on /cow 751M 751M 0 100% / udev 740M 12K 740M 1% /dev tmpfs 151M 792K 150M 1% /run /dev/sr0 794M 794M 0 100% /cdrom /dev/loop0 758M 758M 0 100% /rofs none 4.0K 0 4.0K 0% /sys/fs/cgroup tmpfs 751M 1.4M 749M 1% /tmp none 5.0M 4.0K 5.0M 1% /run/lock none 751M 276K 751M 1% /run/shm none 100M 40K 100M 1% /run/user

    Read the article

  • Error mounting: mount exited with exit code 13

    - by Mike Williamson
    I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

    Read the article

  • Ethernet card not detected on Ubuntu Server 12.04

    - by Dana
    My onboard ethernet isn't detected after a re-install of Server 12.04. For reasons I won't get into here, I had to put the server's drive into another machine to install Ubuntu, then swap back into the server. So the server starts up fine, except for the "Waiting for network configuration". I read in another article that Server, by default, doesn't handle new mac addresses for hardware changes dynamically, unlike Ubuntu Desktop, but a look at /etc/udev/rules.d/70-persistent-net.rules shows only one ethernet interface. Shouldn't it show both the old, and the new? lspci -vv shows an ethernet interface, so what the heck is going on? I should mention that the onboard LAN is enabled in the BIOS. And I know this isn't important, but all this started when I changed some network configuration settings in webmin before the re-install. It couldn't download any updates, so I tinkered a little. Broke, it, installed FreeNAS, which worked, but I didn't like it, then went back to Ubuntu Server, and now I'm in this pickle. Thanks for any advice!

    Read the article

  • Facilitating XNA game deployments for non programmers

    - by Sal
    I'm currently working on an RPG, using the RPG starter kit from XNA as a base. (http://xbox.create.msdn.com/en-US/education/catalog/sample/roleplaying_game) I'm working with a small team (two designers and one music/sound artist), but I'm the only programmer. Currently, we're working with the following (unsustainable) system: the team creates new pics/sounds to add to the game, or they modify existing sounds/pics, then they commit their work to a repository, where we keep a current build of everything. (Code, images, sound, etc.) Every day or so, I create a new installer, reflecting the new images, code changes, and sound, and everyone installs it. My issue is this: I want to create a system where the rest of the team can replace the combat sounds, for instance, and they can immediately see the changes, without having to wait for me to build. The way XNA's setup, if I publish, it encodes all of the image and sound files, so the team can't "hot swap." I can set up Microsoft VS on everyone's machine and show them how to quickly publish, but I wanted to know if there was a simpler way of doing this. Has anyone come up against this when working with teams using XNA?

    Read the article

  • Select tool to minimize JavaScript and CSS size

    - by Michael Freidgeim
    There are multiple ways and techniques how to combine and minify JS and CSS files.The good number of links can be found in http://stackoverflow.com/questions/882937/asp-net-script-and-css-compression and in http://www.hanselman.com/blog/TheImportanceAndEaseOfMinifyingYourCSSAndJavaScriptAndOptimizingPNGsForYourBlogOrWebsite.aspx There are 2 major approaches- do it during build or at run-time.In our application there are multiple user-controls, each of them required different JS or CSS files, and they loaded dynamically in the different combinations. We decided that loading all JS or CSS files for each page is not a good idea, but for each page we need to load different set of files.Based on this combining files on the build stage does not looks feasible.After Reviewing  different links I’ve decided that squishit should fit to our needs. http://www.codethinked.com/squishit-the-friendly-aspnet-javascript-and-css-squisherDifferent limitations of using SquishIt.We had some browser specific CSS files, that loaded conditionally depending of browser type(i.e IE and all other browsers). We had to put them in separate bundles,For Resources and AXD files we decide to use HttpModule and HttpHandler created by Mads KristensenTo GZIP html we are using wwWebUtils.GZipEncodePage() http://www.west-wind.com/weblog/posts/2007/Feb/05/More-on-GZip-compression-with-ASPNET-Content Just swap the order of which encoding you apply to start by asking for deflate support and then GZip afterwards.Additional tips about SquishIt.Use CDN: https://groups.google.com/group/squishit/browse_thread/thread/99f3b61444da9ad1Support intellisense and generate bundle in codebehind http://tech.kipusoep.nl/2010/07/23/umbraco-45-visual-studio-2010-dotless-jquery-vsdoc-squishit-masterpages/Links about other Libraries that were consideredA few links from http://stackoverflow.com/questions/5288656/which-one-has-better-minification-between-squishit-and-combres2.Net 4.5 will have out-of-the-box tools for JS/CSS combining.http://weblogs.asp.net/scottgu/archive/2011/11/27/new-bundling-and-minification-support-asp-net-4-5-series.aspx . It suggests default bundle of subfolder, but also seems supporting similar to squishit explicitly specified files.http://www.codeproject.com/KB/aspnet/combres2.aspx  config XML file can specify expiry etchttps://github.com/andrewdavey/cassette http://stackoverflow.com/questions/7026029/alternatives-to-cassetteDynamically loaded JS files requireJS http://requirejs.org/docs/start.html  http://www.west-wind.com/weblog/posts/2008/Jul/07/Inclusion-of-JavaScript-FilesPack and minimize your JavaScript code sizeYUI Compressor (from Yahoo)JSMin (by Douglas Crockford)ShrinkSafe (from Dojo library)Packer (by Dean Edwards)RadScriptManager  & RadStyleSheetManager -fromTeleric(not free)Tools to optimize performance:PageSpeed tools family http://code.google.com/intl/ru/speed/page-speed/download.htmlv

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >