Search Results

Search found 2130 results on 86 pages for 'swap'.

Page 45/86 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• VMWare Server :: VM set to 2gb RAM but vmware process shows 100mb physical, 1900mb virtual

  - by brad

  I've set up a VMWare instance to run CastIron Integration Appliance. I allocated 2gb of memory to the instance, assuming it would take this as physical memory (my server has 8gb total). When I view top however on the server, the vmware-vmx process has about 100m Resident memory and 1900m Virtual. Running CastIron it reports that the appliance often hits 50% memory usage. Does this mean I'm using 900mb of harddrive space as memory? I wanted VMWare to use 2gb of physical memory, no swap. Can anyone tell me how to achieve this? Setup Debian Lenny 5.0.3 VMWare Server 2.0.2

  Read the article

• Apache: Use Specific Applicaion for CGI scripts

  - by RandomInsano

  I have two servers, one in production and one for development. The production server is Solaris, dev is FreeBSD. Because of this, python is installed in different directories. I'm using Python right now for making CGI scripts, and needing to remember to swap my hashbangs when I copy from dev to production is a little annoying (Same issue for SVN updates depending on which server I'm comitting from). Is there a way to configure apache so that I no longer need to hashbangs? Like, if it would lauch python and supply the CGI script for it? Might be a bit of a stretch, but no harm in asking

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• How to force my laptop to use the discrete GPU?

  - by Anton Roth

  My laptop (Asus X7BSV) is stuck using only the integrated GPU. It has a nVidia GT540M as well, but I cannot get it to work. I am using a Windows 7 x64 with latest drivers. This occurred after I attached an external USB monitor I need for work, and since then I cannot swap back to the nVidia GPU (dxdiag for example says that the primary GPU is the Intel integrated one). Asus support asked me to completely reinstall the system, but that is something I do not want to do. I checked the BIOS, there is no option as to what GPU to use. The nVidia card itself is working, since I can use CUDA on it, and it worked with a Ubuntu Live CD. In the nVidia software management I tried setting it to global setting, high performance GPU (nVidia), but that had no impact. What am I missing here? I did uninstall/delete all drivers and software related to the external monitor, but that did not help.

  Read the article

• Need help in making my new laptop dual boot with ubuntu 9.10

  - by michael

  Hi, I have a new laptop which comes with window 7. I want to dual-boot it with ubuntu 9.10. I have burned the install disk of 9.10. But during the install process, I am stuck in 'setup my partition'. It has 2 options: wipe out my whole hard disk' or 'manually configure' I don't want it to wipe out my whole hard disk (i want to keep my window 7). But how can I manually configure the partition to use the free space and create a partition so that I can install ubuntu 9.10 and swap space? Thank you.

  Read the article

• Can't boot into Linux partition after installation

  - by Otto

  I just installed Ubuntu. I created a partition in MacOSx using Disk utility, then deleted the partition and installed Ubuntu on the free space created. After the installation, Ubuntu said it would reboot. I hang on shutdown (which is normal, as google told me), so I used the power button to turn the MacBook off. Now I want to boot into Ubuntu. Pressing option/alt on startup only shows me the MacOSx and Windows partition. Also, the Linux partition isn't showing up on my MacOSx desktop. And in Disk Utility, I can see 3 grayed out partitions: "disk0s4", "disk0s5" and "Linux Swap". What can I do to boot into Ubuntu without losing my other partitions? Thank you for your help.

  Read the article

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

• How do I tell if my firewire connection is running as 400 or 800?

  - by Tom

  I have a MacBook Pro with FireWire 800 and a freecom external harddrive that has USB3, FireWire 400 and 800. I am using a Nikkai FireWire 800 cable that has 800 connector on one end and a 400 connector on the other end. The 800 connector is attached to the MacBook pro and the 400 connector is attached to the freecom drive. Is there any way to tell what connection has been established? I looked at disk utility and it simply said 'FireWire'. Is there a command-line tool that would give more information? If it's 400, I plan to swap the cable for 800 connector at both ends.

  Read the article

• Nagios: Which services should I monitor on different roles of servers?

  - by Itai Ganot

  I've started working in a new workplace and my first task is to build a Nagios server and configure it to monitor the servers in the network. Since I'm starting from scratch I wanted to hear from you, experienced users, which checks should I configure for each role? For example, there are some basic checks which I run on each Linux machine I monitor: SSH, Ping, Load, Current Users, Swap Usage, etc... Now my question is, which specific checks should I run for a DataBase server, for a Networking Switch, for Httpd servers? (I currently monitor how many httpd processes are running) Thanks in advance

  Read the article

• httpd service keep restarting. after 15-20 mins

  - by niraj

  I have recently purchased Dedicated Server which has 16bg ram and 1TB Harddisk. It has Cpanel and for firewall CSF Installd. I am mainly going to install it for File hosting service. Now the day i moved my httpd service keep restarting every 15-20 mins. It becomes unresponsive after that so have to manually restart it. My httpd settings are Start Servers = 5 Minimum Spare Servers = 5 Maximum Spare Servers = 10 Server Limit = 20000 Max Clients = 10000 Max Requests Per Child = 10000 Keep-Alive = On Keep-Alive Timeout = 5 Max Keep-Alive Requests = Unlimited Timeout 300 TOP is top - 14:53:41 up 1 day, 23:39, 2 users, load average: 0.10, 0.14, 0.09 Tasks: 1563 total, 1 running, 1562 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.6%sy, 0.0%ni, 98.1%id, 0.2%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 16303780k total, 16142048k used, 161732k free, 135264k buffers Swap: 8224760k total, 868k used, 8223892k free, 14136616k cached Please help me in this its keep happning.

  Read the article

• Alternatives to amavis for RAM-bound server

  - by rsuarez

  I'm running a small VPS server that works as web and mail server. It has only 256MB of RAM, and it's sucking 100MB of swap constantly. I've found that one of the culprits is amavis, taking about 30MB of resident memory, and would like to ditch it and use some alternative. I don't have much mail daily, so it being a bit slower wouldn't be a problem. I'd like to avoid Spamassassin altogether, if possible, because it's quite big even if used in offline mode. I'm already using RBLs and a few small blacklists, and used greylisting for a while but abandoned it because it gave me a few problems (don't remember which; I think it was related to not configuring properly white lists for several big ISPs). So, is there some alternative to amavis that I could use without much RAM (and if possible, CPU) usage? Thanks in advance.

  Read the article

• Installing linux mint in one partition

  - by sha404

  So, I have a disk with a MBR setup(image below). I've managed to have 50 GB unallocated space for intalling Linux Mint 14. And I want to keep the current windows OS too(but don't want the Mint inside windows). Now I've seen in some tutorials that Linux Mint needs several partitions for bootloader, swap, & home. I don't like to have so many partitions & maybe MBR stuff won't let me create more than one now. So, is it possible to install Linux Mint in one partition only? If it is really impossible than what's the minimum number? & how can I accomplish that? Thanks in advance.

  Read the article

• need advice for storing data setup hardware for client with 80TB per year of data footprint increase

  - by dasko

  hi everyone, i currently have a client that will be adding replicated data from satellite locations in the number of approximately 80TB per year. with this said in year 2 we will have 160TB and so on year after year. i want to do some sort of raid 10 or raid 6 setup. i want to keep the servers to approximately 4u high and rack mounted. all suggestions welcome on a replication strategy. we will be wanting to have one instance of the data in house and the other to be co-located (any suggestions on co-locate sites too?). the obvious hardware will be something like a rack mount server with hot swap trays and dual xeon based type processors. the use of the data is for archives of information, files will be made up of small file sizes. i can add or expand to this question if it is too vague. thanks for looking.

  Read the article

• Ubuntu dual boot and grub error 18

  - by srboisvert

  I've attempted to install 9.04 on an older toshiba laptop with a new 300GB drive and am getting the dreaded Grub error 18 that indicates that grub is looking beyond the bios readable area of the HD and failing. I just let ubuntu roll with its default selections when installing and ended up with this: Drive layout /dev/sda1 -ntfs 128GB -boot /dev/sda2 -extended 170GB -lba /dev/sda5 -ntfs 167.59GB /dev/sda6 -ext3 2.33GB /dev/sda7 -linux-swap 172MB I'd like make the system dual bootable without having to reinstall windows (real pain since I would have to go through an obstructionist IT dept). I know I can make windows bootable with a rescue disk and fixmbr but is there something I can do to make it dual bootable using the ubuntu livecd? Alternately, what should I have done at the partition stage of ubuntu installation to avoid this?

  Read the article

• How should I capture Linux kernel panic stack traces?

  - by Alnitak

  What's current best practice to capture full kernel stack traces on a Linux system (RHEL 5.x, kernel 2.6.18) that occasionally panics in a device driver? I'm used to the "old" SunOS way of doing things - crash dumps get written to swap, and on reboot the dump gets retrieved in the local file system. man 8 crash refers to diskdump, but that appears to be unsupported. and/or deprecated. I've played with kdump, but it's unclear whether I can get a stack trace from that. Triggering a panic via Magic SysRq didn't create one. It also seems wasteful to reserve so much memory (128MB) just for a kexec crash recovery kernel.

  Read the article

• linux migration/N high cpu consumption

  - by Alexander

  on my linux appliance based on 3.0.0-14 kernel I got: RPN:/tmp# ps axuf | grep migration root 6 92.9 0.0 0 0 ? S Apr23 2788:33 \_ [migration/0] root 7 99.7 0.0 0 0 ? S Apr23 2993:20 \_ [migration/1] my top is RPN:/tmp# top -b -n1 top - 12:03:41 up 2 days, 2:18, 5 users, load average: 25.76, 25.26, 24.73 Tasks: 171 total, 1 running, 168 sleeping, 0 stopped, 2 zombie Cpu(s): 14.0%us, 12.6%sy, 0.8%ni, 72.0%id, 0.3%wa, 0.0%hi, 0.3%si, 0.0%st Mem: 1543032k total, 1264728k used, 278304k free, 25308k buffers Swap: 0k total, 0k used, 0k free, 183168k cached My question: why processes "migration/N" take so much CPU?

  Read the article

• Running out of LowMem with Ubuntu PAE Kernel and 32GB of RAM

  - by magneticMonster

  I'm running a Java data import process on a 32-bit Ubuntu 10 PAE kernel machine. After running the process for a while, the oom-killer zaps my Java process. After some Googling and digging through docs, it looks like the system is running out of LowMem. I started the process for the third time and am watching free -lm show me Low: 464 386 77 with the free value (77MB) slowly decreasing. Why am I running out of lowmem and how do I increase it? Some details: $ cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 $ free -lm total used free shared buffers cached Mem: 32086 24611 7475 0 0 24012 Low: 464 407 57 High: 31621 24204 7417 -/+ buffers/cache: 598 31487 Swap: 2047 0 2047

  Read the article

• How do I replace a harddrive that is in a two-way mirror storage space on Windows 8?

  - by Jon

  I have a storage space in Windows 8 doing a two-way mirror on three harddrives. The sizes are 297GB, 189GB, and 70GB. I would like to replace the 70GB HD with a larger one. My thought was to remove that drive from the space via the Storage Space control panel, shutdown, replace HD with bigger drive, reboot, add new HD to the storage space. I can't find any options to remove a HD from a storage space in the control panel. Should I just shutdown and swap out the small drive or is there another process for safely replacing the old HD? (By the way, the old HD is still operational.)

  Read the article

• What is a good partitioning design/scheme for a multi-boot *nix system?

  - by static

  I'm planning to install Debian on my server. I would like to design the partitioning scheme in such a way, that I could install one or more other *nix distributives on that. So, reading many articles I think this scheme could be a good one for the initial idea of multi-boot: /grub /swap /LVM VG1 (for OS1) -> /boot (LV1) / (LV2) /tmp (LV3) /var ... /var/log /home /LVM VG2 (for OS2) -> /boot / /tmp /var /var/log /home ... (other distros) /LVM VG0 (for data) -> /data (LV1) But I'm confused a little bit now: what should be the labels for these partitions (unique or not) and what should be the mounting points looking as (/home (OS1) mounted to /home as well as /home (OS2)...)?

  Read the article

• Dell PowerEdge 6850 Degraded HDD

  - by Matt

  Good Morning, We have a dell power edge 6850 with a degraded drive in the RAID array. I have never had to recover such an issue, so any help or advice would be welcome. Basically it hasn't affected the server at an operating system level, but has slowed down performance, I have a replacement drive in hand but as this is our main database server I want to proceed with extreme caution. My options as I see them are - Can I just hot swap the degraded drive with the new one and the data will automatically re-sync and we are all back to normal presumably this is dependant on the current raid configuration? reading various comments on-line I may need to re-configure the RAID array and re-build the broken drive? This screams disaster to me with the main worry being that I wipe any other data. Option 1 would of course make my day. Thanks in advance

  Read the article

• Dell Power Edge R515 - Replacing a Bad Hard Drive in a RAID

  - by LonnieBest

  I've ordered a new hard drive to replace a bad one in a Dell Power Edge R515. The manual covers obvious topics regarding physical replacing of hard drives, but I've never done this before on a production server where RAID is involved. I've heard people talk about this topic, and I've heard that some servers have RAID controllers that are smart enough to allow you to just put in the new drive (hot swap), and then the server will know automatically how to rebuild that drive to be what the old one was to the system. Where do I find the proper procedure for replacing a failed hard drive on a live production Dell Power Edge R515? Can someone with experience tell me how easy or hard this usually is?

  Read the article

• Cannot install Oracle Application server

  - by ziftech

  After succesfull installation of database 10g server, I cannot run install file for application server - it closed unexpectly. How can be problem investigated? Log file contains: Checking installer requirements... Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 5.2 Passed Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed Checking swap space: must be greater than 1535 MB. Actual 4092MB Passed Checking Temp space: must be greater than 150 MB. Actual 5083 MB Passed All installer requirements met.

  Read the article

• misaligned raid partition in Ubuntu 10.04

  - by Linux Jedi

  I attached two identical hard drives to my linux machine. Then using gparted I formated the first 1024 mb at the beginning of each drive as linux swap space. Then I went into system-administration-disk utility. In there I went to file-create-RAID array. I selected the remaining space in each of the two identical hard drives and created a striped raid array. After the array was created, a warning message appeared. It said "The partition is misaligned by 522240 bytes. This may result in very poor performance. Repartitioning is suggested." What do I do now? As far as I can tell, the partitions are identical.

  Read the article

• Compilation of Etherpad fails in an OpenVZ VE

  - by ulf

  Hi everyone. I’m almost giving up, this will be my last try: I try to compile Etherpad on my OpenVZ server. It’s running a Debian 5.0 as the host system, in the VE I’ve got Ubuntu 10.04. I installed Etherpad in this VE with the instructions from the official Ubuntu Wiki: https://wiki.ubuntu.com/Etherpad. Everything runs fine until it comes to compilation. After calling bin/build.sh as described in the wiki the first steps are running fine. But then I’m running into a memory error: java.io.IOException: Cannot run program "cp": java.io.IOException: error=12, Cannot allocate memory Well, I understand the error message but don’t see the cause. The command free tells me that there’s plenty memory left in this VE: total used free shared buffers cached Mem: 2415236 1140872 1274364 0 0 0 -/+ buffers/cache: 1140872 1274364 Swap: 0 0 0 Beautiful. But even repeating the compilation process doesn’t bring me any further. Any help would be appreciated.

  Read the article

• How to have a soft-real-time process in presense of heavily swapping IO-intensive background load?

  - by Vi

  schedtool: PID 32301: PRIO 4, POLICY R: SCHED_RR , NICE -20, AFFINITY 0xf ionice: realtime: prio 4 But the music is stumbling anyway. Background load is low prio (SCHED_IDLEPRIO, idle ionice), but uses a lot of memory (more than is physically available) and does a lot of IO and calculations. Latencytop shows about 1500ms for: Following symlink Writing buffer to disk (sync) Page fault Writing a page to disk both for the bg load and for unrelated processes. Load average is 10 and counting. Why cannot it allocate, for example, 200MHZ of one of the cores and 32M of memory and not less than once per second opportunity for IO for mplayer to make it happy while continuing calculations on the background? Or: why it cannot leave background task and swap loving each other but keeping the rest of the system as if there were no background load? How to have RT processes AND heavy bg load simultaneously (without of virtual machines)?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >