Search Results

Search found 2130 results on 86 pages for 'swap'.

Page 47/86 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• HP DL380 G5 Predictive failure of a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• Encrypt backups with GPG to multiple tapes

  - by Dan

  Currently, I use tar to write my backups (ntbackup files) to a tape drive fed by an autoloader. Ex: tar -F /root/advancetape -cvf /dev/st0 *.bkf (/root/advancetape just has the logic to advance to the next tape if there is one available or notify to swap the tapes out) I was recently handed the requirement to encrypt our tape backups. I can easily encrypt the data with no problems using GPG. The problem I'm having is how do I write this to multiple tapes with the same logic that tar uses to advance the tapes once the current one is filled? I cannot write the encrypted file to disk first (2+TB). As far as I can tell, tar will not accept binary input from stdin (it's looking for file names). Any ideas? :(

  Read the article

• RAID setup for maximizing data retention and read speed

  - by cat pants

  My goals are simple: maximize data retention safety, and maximize read speeds. My first instinct is to do a a three drive software RAID 1. I have only used fakeraid RAID 1 in the past and it was terrible (would have led to data loss actually if it weren't for backups) Would you say software raid 1 or a cheap actual hardware raid card? OS will be linux. Could I start with a two drive raid 1 and add a third drive on the fly? Can I hot swap? Can I pull one of the drives and throw it into a new machine and be able to read all the data? I do not want a situation where I have a raid card fail and have to try and find the same chipset in order to read my data (which i am assuming can happen) Please clarify any points on which it sounds like I have no idea what I am talking about, as I am admittedly inexperienced here. (My hardest lesson was fakeraid lol) Thanks!

  Read the article

• Swappable hard-drives for laptop

  - by lacqui

  I am bringing my old laptop for recycling, and removed my hard drive beforehand. The drive is a 320GB SATA drive, which is the same as my current laptop's drive. I would like to be able to easily swap between the two drives, in order to dual-boot that way. My laptop (Toshiba Satellite A500) needs a tiny Philip's screwdriver to get at the hard drive bay. I would like to replace that with something that is more easily changed, while still allowing the hard drive to rest on the desk. It can stick out a bit due to the laptop's feet, but not too far.

  Read the article

• Windows Media Player functionality for Ubuntu

  - by Xeoncross

  I have way to many music files to bother with setting up playlists. Especially since my files locations keeps changing as I move stuff around and swap between different computers, different mount points, and even different Operating Systems! So managing my media with any application is doomed to failure. However, since I still want to listen to the music I usually just select all the files I want to play at a time and then right-click to open them in a media player. Works great in windows media player and places all the tracks in a temp playlist on the sidebar. Fails in ubuntu using Rhythmbox since it doesn't understand "temp" playlists and just keeps adding files to your FULL listing of all sings on your whole computer. I have over three copies of some tracks now in my audio collection - and all of them are now invalid because the location of the files has changed. So what media player (for Ubuntu) works well with just temporary playlists and will allow me to open up my files without adding them to a collection?

  Read the article

• Load on Ubuntu 8.04 LTS high

  - by Paddington

  My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

  Read the article

• What is the best way to configure the number of workers in Apache?

  - by rbm

  My site receives a lot of traffic for 2 hours during the day (2000 hits per minute). The rest of the day receives less traffic(500e hits per minute). I have been experimenting with the MaxClients and MaxSpareServers values but I still get some downtime during peek hours. How can I calculate the best values for my configuration based on the amount of ram that I have ? Each process is like 36-40 M of Memory total used free shared buffers cached Mem: 3096 793 2302 0 0 0 -/+ buffers/cache: 793 2302 Swap: 0 0 0 Values that I am using now <IfModule prefork.c> StartServers 10 MinSpareServers 22 MaxSpareServers 60 ServerLimit 90 MaxClients 90 MaxRequestsPerChild 400 </IfModule>

  Read the article

• VPS stops responding every now and again

  - by Or W

  I have a Linode vps that I use to host some of my websites on. It's Ubuntu based and it's up to date in terms of all packages. I don't have any cron jobs scheduled or any automatic processes. I host a few (up to date) wordpress blogs there that have very little traffic altogether. Every day (at a different time) my server stops responding, I can't SSH to it, web access is getting timed out and it just dies until I reboot it through the Linode manager. On the linode dashboard I can see that the CPU is not very high (2-3%) Incoming/Outgoing traffic is on 0 and the IO count has a spike just before the server stops responding (SWAP IO is at 2k and IO Rate is at 5k). When I reboot the server everything is just fine. I'm trying to figure out a way to analyze what's going on at these random times where the server freezes up. How can I determine the problem?

  Read the article

• EC2 Amazon Linux AMI MySQL CPU @ 62% When Idle?

  - by Jeff

  I am running MySQL on an Amazon Linux AMI. There is nothing connected to it. There are no connections and no other applications running that use MySQL. It is completely idle, but yet, top is reporting that mysql is using 62% of the CPU? Why is this happening and how do I fix it? Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 97.8%id, 0.0%wa, 0.0%hi, 0.0%si, 1.7%st Mem: 1738504k total, 390708k used, 1347796k free, 56888k buffers Swap: 917500k total, 0k used, 917500k free, 229804k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2959 mysql 20 0 466m 39m 5244 S 62.2 2.3 4:00.67 mysqld 1 root 20 0 19252 1504 1212 S 0.0 0.1 0:00.20 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd There are no connections... mysql> show processlist; +----+------+-----------+------+---------+------+-------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+------+-----------+------+---------+------+-------+------------------+ | 5 | root | localhost | NULL | Query | 0 | NULL | show processlist | +----+------+-----------+------+---------+------+-------+------------------+

  Read the article

• ionice idle is ignored

  - by Ferran Basora

  I have been testing the ionice command for a while and the idle (3) mode seems to be ignored in most cases. My test is to run both command at the same time: du <big folder> ionice -c 3 du <another big folder> If I check both process in iotop I see no difference in the percentage of io utilization for each process. To provide more information about the CFQ scheduler I'm using a 3.5.0 linux kernel. I started doing this test because I'm experimenting a system lag each time a daily cron job updatedb.mlocate is executed in my Ubuntu 12.10 machine. If you check the /etc/cron.daily/mlocate file you realize that the command is executed like: /usr/bin/ionice -c3 /usr/bin/updatedb.mlocate Also, the funny thing is that whenever my system for some reason starts using swap memory, the updatedb.mlocate io process is been scheduled faster than kswapd0 process, and then my system gets stuck. Some suggestion? References: http://ubuntuforums.org/showthread.php?t=1243951&page=2 https://bugs.launchpad.net/ubuntu/+source/findutils/+bug/332790

  Read the article

• scsi and ata entries for same hard drive under /dev/disk/by-id

  - by John Dibling

  I am trying to set up a ZFS pool using 4 bare drives which I have attached to my Ubuntu system via a SATA hot swap backplane. These are Hitachi SATA drives. When I list the contents of /dev/disk/by-id, I see two entries for each drive: root@scorpius:/dev/disk/by-id# ls | grep Hitachi ata-Hitachi_HDS5C3030ALA630_MJ1323YNG0ZJ7C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1064C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG190AC ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1DGPC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG0ZJ7C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1064C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG190AC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1DGPC I know these are the same drives because I wrote down the serial numbers, and all the other drives in this system are either Seagate or WD. The serial number for the first one, for example, is YNG0ZJ7C. Why are there two entries here for each drive? More to the point, when I create my ZFS pool which one should I use; the scsi- one or the ata- one?

  Read the article

• RAID 5 heavy IO hard freezes Ubuntu: Why?

  - by Luke has no name

  I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the computer locked up. Did an identical dd to a JBOD partition on the same machine, and it didn't crash. Assuming a clean RAID5 partition, tri-core processor 2GB of ram, 6GB swap, what could be causing this?

  Read the article

• Applications getting killed automatically

  - by nebi

  I am running httperf client on my m/c and after few seconds it is getting killed. dmesg shows: The command is: httperf --hog --client=0/1 --server=39.0.0.2 --port=80 --uri=/50kb --rate=20000 --send-buffer=4096 --recv-buffer=16384 --num-conns=6000000 --num-calls=1 Although I had done this test no. of times but never faced this error any time. From last two days I am observing this. My Ubuntu version is ubuntu 10.04. and httperf version is httperf-0.9.0 [ 2997.180620] Out of memory: kill process 7977 (apache2) score 70532 or a child [ 2997.180632] Killed process 7977 (apache2) [ 2997.184837] Out of memory: kill process 7971 (rsyslogd) score 8702 or a child [ 2997.184844] Killed process 7971 (rsyslogd) [ 2997.188823] Out of memory: kill process 7978 (apache2) score 1354 or a child [ 2997.188829] Killed process 7978 (apache2) [ 2997.192817] Out of memory: kill process 7973 (atd) score 561 or a child [ 2997.192822] Killed process 7973 (atd) [ 2997.196805] Out of memory: kill process 8102 (httperf) score 471 or a child [ 2997.196811] Killed process 8102 (httperf) Output of free command: total used free shared buffers cached Mem: 3862768 163000 3699768 0 2384 13068 -/+ buffers/cache: 147548 3715220 Swap: 3905528 0 3905528

  Read the article

• Moving Windows 7 OEM from one hard disk to another but retaining the rest of the hardware

  - by Dane

  I think this should be very easy but it doesn't seem like there's a whole lot of info out there. I've personally never done this exact maneuver because I've never needed to retain the OEM licence before. I have a laptop and I wish to simply swap out the hard disk with a bigger one but keep the Windows installation and files intact. Do I use Windows Backup and Restore and burn DVDs or do I just Acronis or something similar. Or is there an even easier way of doing this involving a third party desktop? Any help much appreciated.

  Read the article

• Survive a Software Audit

  - by rosepost1150

  I received a letter from Autodesk asking for a "License Assessment". I understand it as a software audit. They plan to do it remotely. The thing is, I'm a freelancer, I don't use any Software Asset Mangment software, and I just recently swap out my hard drive for a new one, and did a complete clean install, and then I received this request from Autodesk. There is almost nothing on my hard drive now. What do software auditors do when they experience this? Will they (are they allowed) to contact my clients (that info is all over the web..) to get information since they found nothing here?

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• Disk controller speed responsible for slow write speeds?

  - by vizvayu

  I have question. I'm using ESXi 4.0U1 in an IBM x3200M2 with an integrated LSI 1064e RAID controller, without any kind of cache. I have 3 250GB HOT-SWAP SATA HDs configured in RAID1E (IME). ESXi works fine, read speed are quite OK, but write speeds are incredible slow, never more than 8MB/s, and this is the best case scenario, benchmarking with iozone streaming writes, using a VMWare Paravirtual controller and with only this VM active, no swapping of any kind (total vm memory reserved). Already wrote to IBM but I don't have any kind of pay support so they didn't even answered, so I'm just wondering... anybody has any experience with a similar setup? I just want to be sure this is hardware related and can't be fixed with some kind of config option, because I'm thinking on buying a new RAID controller (Adaptec 2405 looks nice). Thanks again!

  Read the article

• How to repair Windows XP Installation HDD from another PC?

  - by Matt

  My friend gave me his HDD that has Windows XP Pro installed on it to try and fix it. I don't have the XP CD to repair it, but I do have the ISO. I suppose I could always burn it.. but that's a lot of trouble because I don't have any blank CD's. I plugged it into my PC's hot-swap drive bay, and I have Daemon tools. Is there anyway I can try to repair the XP installation on this HDD from my PC without booting from it and burning my ISO?

  Read the article

• How should oracle vbox look like in terms of Memory, CPU and Performance? [duplicate]

  - by Nicholas DiPiazza

  This question already has an answer here: Can you help me with my capacity planning? 2 answers I've got a need for a ton of VMs to simulate some realistic load testing scenarios. I've got a bunch of different host machines that differ in ram, cpu's, etc. What should my resource manager look like? Is there a standard way to know what the CPU, Memory and Disk Utilization should be given your CPUs + Memory available + Disks available? For example, I have a box: MemTotal: 50 Gb CPUs: 8 CPUs are pretty much 100% all day long. Memory is at about 60%. Swap not getting hit. Little bewildered by why the VMs, while doing the exact same test script, are showing different virtual memory consumption. Huh.

  Read the article

• Virtualbox: Raw linux partition not booting

  - by abalter

  I have a dual-boot laptop with Windows 7 and Ubuntu 12.04. I am trying to boot the ubuntu partition from windows using Virtualbox. I have successfully created the .vmdk, and created the virtual machine. However, I can't get it to boot (in Virtualbox). All I get is a black screen with the cursor in the top left. I wonder if I'm specifying the partitions correctly. My Ubuntu install has 3 partitions: \, \boot, \home. No swap partition. These are all in Disk 0, partitions 3,4,5 respectively. The command I used to create the .vmdk is: VBoxManage internalcommands createrawvmdk -filename C:\Users\abalter\.virtualbox\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 3,4,5 Then I create a virtual machine based on that .vmdk. Why won't it boot?

  Read the article

• SDcard /dev/sdb2 is apparently in use by the system; will not make a filesystem here

  - by user171223

  I divided my sdcard into 2 partitions, but It got an error and couldn't create a new partition. Error: /dev/sdb2 is apparently in use by the system; will not make a filesystem here! My /dev/sdb was not mounted, and the output of command lsblk was: cxphong@cxphong:~/Desktop$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sr0 11:0 1 1024M 0 rom sda 8:0 0 465.8G 0 disk +-sda1 8:1 0 118.8G 0 part +-sda2 8:2 0 147.7G 0 part /media/DATA +-sda3 8:3 0 137.1G 0 part +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 1023M 0 part [SWAP] +-sda6 8:6 0 61.2G 0 part / sdb 8:16 1 3.7G 0 disk +-sdb1 8:17 1 70.6M 0 part +-sdb2 8:18 1 3.6G 0 part +-sdb1 (dm-0) 252:0 0 70.6M 0 part +-sdb2 (dm-1) 252:1 0 3.6G 0 part I couldn't delete /dev/sdb1 (dm-0) & /dev/sdb2 (dm-1). What are they?

  Read the article

• How do I reduce RAM usage on my server?

  - by Abs

  I have recently launched a site that is very popular but I am having trouble with scalability. My site makes heavy use of FFmpeg and at peak times RAM usage hits the 2 GB point quickly and the swap file starts getting used. CPU usage starts rising too. Users complain that the site is slow. They say this because all FFmpeg instances run very slow because of the number running at the same time. Users make use of FFmpeg on my server in real time. Is there anything I can consider or do to ease down the usage of the server and RAM just shooting up? Maybe there is something better than FFmpeg (!). Is the only solution "throwing some cash" at a more powerful server? I have given little information, please ask for more, so this problem can be solved.

  Read the article

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• Which OS should I boot into for virtualization?

  - by acidzombie24

  This might be a silly question. I use windows 7 99% of the time. I run linux 10% of the time and XP 5% of the time. I am thinking about getting a Intel® Core™ i7-2600 Processor which has hardware support for virtualization. I dont think i want more than one partition. May have a swap partition. Which OS should I make my primary (and only) partition? I suspect windows7 if i am always using it as going through a linux layer would slow it down. Does it matter much which OS i use if i have hardware support for virtualization? At the moment I am using VMWare player. I suspect software doesnt effect performance?

  Read the article

• Cloned Windows 7 to new HDD and want to change the drive letter to C

  - by Hoppe

  I used Clonezilla to clone my existing hard drive to a new one I bought. I then changed the BIOS to set the new drive as the first in the boot sequence. I'm pretty sure that I'm still running Windows 7 on the old drive. My old drive is marked as C. Now that I don't have a disk drive any more, how I do I swap the drive letter from J: to C:? I tried to change it in the disk management section of "Manage", but it reports: "the parameter is incorrect".

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >