Search Results

Search found 14131 results on 566 pages for 'note'.

Page 445/566 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• How do I efficiently parse a CSV file in Perl?

  - by Mike

  I'm working on a project that involves parsing a large csv formatted file in Perl and am looking to make things more efficient. My approach has been to split() the file by lines first, and then split() each line again by commas to get the fields. But this suboptimal since at least two passes on the data are required. (once to split by lines, then once again for each line). This is a very large file, so cutting processing in half would be a significant improvement to the entire application. My question is, what is the most time efficient means of parsing a large CSV file using only built in tools? note: Each line has a varying number of tokens, so we can't just ignore lines and split by commas only. Also we can assume fields will contain only alphanumeric ascii data (no special characters or other tricks). Also, i don't want to get into parallel processing, although it might work effectively. edit It can only involve built-in tools that ship with Perl 5.8. For bureaucratic reasons, I cannot use any third party modules (even if hosted on cpan) another edit Let's assume that our solution is only allowed to deal with the file data once it is entirely loaded into memory. yet another edit I just grasped how stupid this question is. Sorry for wasting your time. Voting to close.

  Read the article

• Which CSS identifier is used for the selected tab in tabbed tables in browsers other than IE?

  - by David Navarre

  When you have a table on a form in Notes, you can choose to display only one row at a time (via the Special Table Row Display parameter on the Table Rows tab of the Table properties). In a Notes document displayed using Internet Explorer that contains such a table, a row is displayed with a cell for each "tab". The TD that serves as the tab for the selected "Notes table row" is assigned <td class="dominoSelTopTab">, while the other tabs get <td class="dominoTopTab">. However, when using other browsers, it's not nearly as simple. In Firefox, each "tab" ends up as a single-celled-single-row-table within the table with very little to identify it. <td><table border="1" cellpadding="2"> <tr><td><div align="center"><b>Tab 2</b></div></td></tr> </table></td> A non-selected tab would show as follows: <td><table border="1" cellpadding="2"> <tr><td><div align="center"><a name="1." href="/Projects/MyCSS.nsf/0c3b9489476440c085257a62006d97d6/d482a1767a4af77f85257a62006db064?OpenDocument&amp;TableRow=1.0#1." target="_self">Tab 1</a></div></td></tr> </table></td> So, the question is, how do I identify the selected tabs and the non-selected tabs when not using IE? Note: For those who are not Notes developers, the HTML is auto-generated from the visual design as laid out in the Notes designer client. I would replace it all with manual HTML, except there is so much of it that doing so would consume far too much time.

  Read the article

• How do I find the highest level TR that contains a specific ID nested in a table

  - by Mykroft

  I have some HTML that looks like this (NOTE: I know this code isn't great but I didn't design it originally and some of it is auto generated): <table id="tab1"> <tr> <td><span>Some text</span></td> <td><span>more text</span></td> <td><input type="text" id="inp1" onclick="DoSomething(this);" /></td> </tr> <tr> <td><span>Some text</span></td> <td><span>more text</span></td> <td><table id="tab2"> <tr><td><input type="radio" id="inp2" onclick="DoSomething(this);" /><span>item</span></td></tr> </table></td> </tr> </table> All of that is embedded in a table which is also embedded in a table and so on. In the DoSomething(this) function I want to retrieve the TR underneath the table tab1. I'm having trouble figuring out the jquery necessary for this. Currently I'm doing something like this: function DoSomething(control) { var parentTab = '<%=tab1.ClientID %>'; var tr = $('#' + parentTab + ' > tbody > tr').has('#' + $(control).attr('id')).get(0); } This seems really messy but works. Is there a cleaner way to do this? If it helps the input inside the table will always be a radio button and a radio button will never appear outside of a sub table. Ideally I'd like to do this without having to know the id of tab1 but that seems impossible.

  Read the article

• How do I set an og:type for the first time without losing likes?

  - by Travis

  When I first created my site, I neglected to add the Open Graph tags that Facebook recommends (http://developers.facebook.com/docs/opengraph/), and the site now has about 1200 Facebook likes through a fb:comments widget. http://graph.facebook.com/http://feedtheanimalssamples.com/ shows this: { "id": "http://feedtheanimalssamples.com/", "shares": 1204 } Recently, I've added added the following OG tags: <meta property="fb:app_id" content="59193243341" /> <meta property="og:title" content="Girl Talk - Feed The Animals Samples (old)" /> <meta property="og:image" content="http://feedtheanimalssamples.com/fta_small.png" /> <meta property="og:url" content="http://feedtheanimalssamples.com" /> But when I add the og:type tag: <meta property="og:type" content="website" /> and Lint the site, I lose all my likes. http://graph.facebook.com/http://feedtheanimalssamples.com/ starts showing this: { "id": "170545342993850", "name": "Girl Talk - Feed The Animals Samples", "picture": "http://profile.ak.fbcdn.net/hprofile-ak-snc4/188039_170545342993850_3277642_s.jpg", "link": "http://www.facebook.com/pages/Girl-Talk-Feed-The-Animals-Samples/170545342993850", "category": "Website", "website": "http://feedtheanimalssamples.com/", "description": "Interactively identifies the samples in the 2008 album 'Feed The Animals' by mashup artist Girl Talk.", "likes": 1 } (Note the "likes": 1.) So: How do I set the og:type without losing my likes? I'm trying to let my likers know that I've created a new and improved site. I'm following the instuctions at http://developers.facebook.com/blog/post/397 under "Publishing to Connected Users via Graph API", but using that API apparently requires specifying an og:type. Thanks!

  Read the article

• Purpose of singletons in programming

  - by thecoshman

  This is admittedly a rather loose question. My current understanding of singletons is that they are a class that you set up in such a way that only one instance is ever created. This sounds a lot like a static class to me. The main differnce being that with a static class you don't / can't instance it, you just use it such as Math.pi(). With a singletong class, you would still need to do something like singleton mySingleton = new singleton(); mysingleton.set_name("foo"); singleton otherSingleton = new singleton(); // correct me if i am wrong, but mysingleton == othersingleton right now, yes? // this the following should happen? otherSingleston.set_name("bar"); mysingleton.report_name(); // will output "bar" won't it? Please note, I am asking this language independently, more about the concept. So I am not so worried about actually how to coed such a class, but more why you would wan't to and what thing you would need to consider.

  Read the article

• Accessing variables with different scope in C++

  - by Portablejim

  With #include <iostream> using namespace std; int a = 1; int main() { int a = 2; if(true) { int a = 3; cout << a << " " << ::a // Can I access a = 2 here? << " " << ::a << endl; } cout << a << " " << ::a << endl; } having the output 3 1 1 2 1 Is there a way to access the 'a' equal to 2 inside the if statement where there is the 'a' equal to 3, with the output 3 2 1 2 1 Note: I know this should not be done (and the code should not get to the point where I need to ask). This question is more "can it be done".

  Read the article

• ASP.NET or PHP: Is Memcached useful for storing user-state information?

  - by hamlin11

  This question may expose my ignorance as a web developer, but that wouldn't exactly be a bad thing for me now would it? I have the need to store user-state information. Examples of information that I need to store per user. (define user: unauthenticated visitor) User arrived to the site from google/bing/yahoo User utilized the search feature (true/false) List of previous visited product pages on current visit It is my understanding that I could store this in the view state, but that causes a problem with page load from the end-users' perspective because a significant amount of non-viewable information is being transferred to and from the end-users even though the server is the only side that needs the info. On a similar note, it is my understanding that the session state can be used to store such information, but does not this also result in the same information being transferred to the user and stored in their cookie? (Not quite as bad as viewstate, but it does not feel ideal). This leaves me with either a server-only-session storage system or a mem-caching solution. Is memcached the only good option here?

  Read the article

• std::map keys in C++

  - by Soumava

  I have a requirement to create two different maps in C++. The Key is of type CHAR * and the Value is a pointer to a struct. I am filling 2 maps with these pairs, in separate iterations. After creating both maps I need find all such instances in which the value of the string referenced by the CHAR * are same. For this i am using the following code : typedef struct _STRUCTTYPE { .. } STRUCTTYPE, *PSTRUCTTYPE; typedef pair {CHAR *,PSTRUCTTYPE} kvpair; .. CHAR *xyz; PSTRUCTTYPE abc; after filling the information; Map.insert (kvpair(xyz,abc)); the above is repeated x times for the first map, and y times for the second map. after both are filled out; std::map {CHAR *, PSTRUCTTYPE} :: iterator Iter,findIter; for (Iter=iteratedMap-begin();Iter!=iteratedMap-end();mapIterator++) { char *key = Iter-first; printf("%s\n",key); findIter=otherMap-find(key); //printf("%u",findIter-second); if (findIter!=otherMap-end()) { printf("Match!\n"); } } The above code does not show any match, although the list of keys in both maps show obvious matches. My understanding is that the equals operator for CHAR * just equates the memory address of the pointers. My question is, what should i do to alter the equals operator for this type of key or could I use a different datatype for the string? *note : {} has been used instead of angle brackets as the content inside angle brackets was not showing up in the post.

  Read the article

• JSON onFailure issue

  - by Mikey1980

  I’m having trouble getting a AJAX/JSON function to work correctly. I had this function grabbing value from a drop down box but now I want to use an anchor tag to set it's value. I thought it would be easy to just use the onClick event to pass string to the function I was using for the drop down box but I get the alert in JSON onFailure event even though data gets added to MySQL. I tried removing the alert from onFailure event but then it doesn't add the data. The drop down still continues work work fine, no alerts. (I should note that removing the alert also broke my drop down box) 1st I add an onClick event… <a href="<?php echo Settings::get('app.webroot'); ?>?view=schedule&action=questions" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('bre','','template/images/schedule/bre_f2.gif',1)" onclick="assignCallType('testing')";> 2nd I check main.js.php function assignCallType(type) { alert(type); new Request.JSON({ url: "ajax.php", onSuccess: function(rtndata,txt){ if (rtndata['STATUS'] != 'OK') alert('Status was not okay'); }, onFailure : function () { alert("onFailure") } }).get({ 'action': 'assignCallType', 'call_type': type }); } 3rd Ajax.php: the variable is back in PHP and values get added to MySQL but I get the Alert in the JSON onFailure event if ($_GET['action'] == "assignCallType") { if ($USER->isInsideSales()) { $call_type = $_GET['call_type']; $_SESSION['callinfo']->setCallType($call_type); $_SESSION['callinfo']->save($callid); echo json_encode(array('STATUS'=>'OK')); } else { echo json_encode(array('STATUS'=>'DENIED')); } } Any idea where I am going wrong. The only difference between this and the working drop down is how the function was called, I used onchange="assignCallType(this.value)".

  Read the article

• How can I create a rules engine without using eval() or exec()?

  - by Angela

  I have a simple rules/conditions table in my database which is used to generate alerts for one of our systems. I want to create a rules engine or a domain specific language. A simple rule stored in this table would be..(omitting the relationships here) if temp > 40 send email Please note there would be many more such rules. A script runs once daily to evaluate these rules and perform the necessary actions. At the beginning, there was only one rule, so we had the script in place to only support that rule. However we now need to make it more scalable to support different conditions/rules. I have looked into rules engines , but I hope to achieve this in some simple pythonic way. At the moment, I have only come up with eval/exec and I know that is not the most recommended approach. So, what would be the best way to accomplish this?? ( The rules are stored as data in database so each object like "temperature", condition like "/=..etc" , value like "40,50..etc" and action like "email, sms, etc.." are stored in the database, i retrieve this to form the condition...if temp 50 send email, that was my idea to then use exec or eval on them to make it live code..but not sure if this is the right approach )

  Read the article

• Sequence Point and Evaluation Order( Preincrement)

  - by Josh

  There was a debate today among some of my colleagues and I wanted to clarify it. It is about the evaluation order and the sequence point in an expression. It is clearly stated in the standard that C/C++ does not have a left-to-right evaluation in an expression unlike languages like Java which is guaranteed to have a sequencial left-to-right order. So, in the below expression, the evaluation of the leftmost operand(B) in the binary operation is sequenced before the evaluation of the rightmost operand(C): A = B B_OP C The following expression according, to CPPReference under the subsection Sequenced-before rules(Undefined Behaviour) and Bjarne's TCPPL 3rd ed, is an UB x = x++ + 1; It could be interpreted as the compilers like BUT the expression below is said to be clearly a well defined behaviour in C++11 x = ++x + 1; So, if the above expression is well defined, what is the "fate" of this? array[x] = ++x; It seems the evaluation of a post-increment and post-decrement is not defined but the pre-increment and the pre-decrement is defined. NOTE: This is not used in a real-life code. Clang 3.4 and GCC 4.8 clearly warns about both the pre- and post-increment sequence point.

  Read the article

• Exchange Server 2010: move mailboxes from recoveded and mounted edb to user's mailbox [closed]

  - by Cook

  One of our exchange servers crashed, and I am trying to recover the mailboxes. We had 1 exchange 2003 server named "apex" and 1 exchange 2010 server named "2008Enterprise. the exchange 2010 server named "2008Enterprise" crashed. I created a new exchange 2010 server named "Providence". I ran the command on Providence: New-MailboxDatabase -Recovery -Name JBCMail -Server Providence -EdbFilePath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147\Mailbox Database 0579285147.edb" -LogFolderPath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147" this command executed and finished without error I then ran the command: eseutil /p E00 this command was executed from the below directory: c:\data\Exchange\Mailbox\Mailbox Database 0579285147 I then mounted the JBCMail with the mount command note: I do not have my full typed command. Inside my Exchange Management Console (EMC) I can view the new mailbox database named JBCMail. The JBCMail database is show as mounted on the exchange server named Providence. I can see the crashed Exchange server named 2008Exchange. In the EMC the crashed exchange server states the Copy Status under ServerConfiguration-Mailbox is ServiceDown. From here I need to recover three mailboxes The mail boxes are on the apex server. How do I move the mailboxs from apex to Providence? How do I restore the mailboxes from JBCmail mounted database to the user's mailbox? I do not fully understand how to use the Restore-Mailbox command because when I use this command it tries to restore the mailbox to the dead apex server. Restore-Mailbox -ID 'Jason Young' -RecoveryDatabase JBCMail

  Read the article

• How can I automate new system provisioning with scripts under Mac OS X 10.6?

  - by deeviate

  I've been working on this for days but simply cannot find the correct references to make it work. The idea is to have a script that will baseline newly purchased Macs that comes into the company with basic stuffs like set autologin to off, create a new admin user (for remote admins to access for support, set password to unlock screensaver and etc) . Sample list for baseline that admins have to do on each new machine: Click the Login Options button Set Automatic Login: OFF Check: Show the Restart, Sleep, and Shutdown buttons Uncheck: Show input menu in login window Uncheck: Show password hints Uncheck: Use voice over in the login window Check: Show fast user switching menu as Short Name (note: this is only part of a long list to do on each machine) I've managed to find some references to make some parts work. Like autologin can be unset with: defaults write /Library/Preferences/.GlobalPreferences com.apple.userspref.DisableAutoLogin -bool TRUE and I've kinda found ways to muscle in a new user creation (including prompts) with AppleScript and shell commands. But generally its tough finding ways to do somewhat simple things like turn on password to get out of screensaver or to allow fast user switching. References are either too limited or just no where to be seen (e.g. I can unset autologin via cli but the very next setting on the system preference "show restart, sleep and shutdown buttons" is somewhere else and I can't find any command line to make it set) Does anyone have any ideas on a list, document, reference or anything of where each setting on the system resides so that I can be pointed to make it work? or maybe sample scripts for the above example... My thanks for reading thus far—a huge thank you for whoever that has any info on the above.

  Read the article

• A question of long-running and disruptive branches

  - by Matt Enright

  We are about to begin prototyping a new application that will share some existing infrastructure assemblies with an existing application, and also involve a significant subset of the existing domain model. Parts of the domain model will likely undergo some serious changes for this new application, and the endgame for all of this, once the new application has been fully specified and is launch-ready is that we would like to re-unify the models of the two applications (as well as share a database, link functionality, etc.), but for the duration of development, prototyping, etc, we will be using a separate database so that we can change things without worrying about impact to development or use of the existing application. Since it is a prototype, there will be a pretty long window during which serious changes or rearchitecturing can occur as product management experiments with different workflows, different customer bases are surveyed, and we try and keep up. We have already made a Subversion branch, so as to not impact concurrent development on the mature application, and are toying with 2 potential ways of moving forward with this: Use the svn branch as the sole mechanism of separation. Make our changes to the existing domain models, and evaluate their impact on the existing application (and make requisite changes to ProjectA) when we have established that our long-running side branch is stable enough for re-entry to trunk. "Fork" the shared code (temporarily): Copy ProjectA.Entities to NewProject.Entities, and treat all of the NewProject code as self-contained. When all of the perturbations around the model have died down and we feel satisfied, manually re-integrate the changes (as granular or sweeping as warranted) back into ProjectA.Entities, updating ProjectA to use the improved models at each step (this can take place either before or after the subversion merge has occurred). The subversion merge will then not handle recombination of any of the heavy changes here. Note: the "fork" method only applies to the code we see significant changes in store for, and whose modification will break ProjectA - shared infrastructure stuff for example, we would just modify in place (on our branch) and let the merge sort out. Development is hard, go shopping. Naturally, after not coming to an agreement, we're turning it over to the oracle of power that is SO. Any experience with any of these methods, pain points to watch out for, something new entirely?

  Read the article

• PHP/Javascript: Restart Form Button Isn't Working, Code Insde

  - by Josh K

  Basically I want a confirmation box to pop up when they click the button asking if they sure they want to restart, if yes, then it destroys session and takes them to the first page. Heres what i got... echo "<form id=\"form\" name=\"form\" method=\"post\" action=\"nextpage.php\">\n"; echo " <input type=\"button\" name='restart' value='Restart' id='restart' onclick='restartForm()' />"; and for the script... <script type=\"text/javascript\"> <!-- function restartForm() { var answer = confirm('Are you sure you want to start over?'); if (answer) { form.action=\"firstpage.php\"; session_destroy(); form.submit(); } else alert ('Restart Cancelled'); } // -- </script>"; EDIT: Note that pressing the button brings up the confirm box, but if you click okay nothing happens sometimes. Sometimes if u click cancel it still submits the form (To the original action)

  Read the article

• implementation musical instrument using audio unit

  - by Develop.Kim

  post same question at apple developer forum ,too hi first sorry that my english is poor.. i want develop iphone application that playing musical instrument like 'ocarina' but don't need blow mic features. so first i tried to find that how implementation 'virtual musical instrument ' in iphone development. the during the decide implementation using 'Audio Unit' to report this article (link) so i want two kind of questions. i recognize that the 'musical instrument' can be divided into three sound that 'attack', 'sustain' , 'release'. 'decay' maybe included (link) . How implementation when audio unit base 'AUInstrumentBase' each sound ? i download sample 'SinSynth' (link) . i want play note this instrument unit for analyze source and study. Is there way to using AULab? expected the way using MIDI input . but i don't have MIDI. in addition, i wonder that i would think it right the way. to ask the advice... thank for reading poor english my article.

  Read the article

• How to defer execution of an Event on each item in a collection until iteration of collection is com

  - by Metro Smurf

  Of Note: This is more of a curiosity question than anything else. Given a List<Window> where each window has an event attached to the Close Event which removes the window from the collection, how could you use delegates / events to defer the execution of the Close Event until the collection has been iterated? For example: public class Foo { private List<Window> OpenedWindows { get; set; } public Foo() { OpenedWindows = new List<Window>(); } public void AddWindow( Window win ) { win.Closed += OnWindowClosed; OpenedWindows.Add( win ); } void OnWindowClosed( object sender, EventArgs e ) { var win = sender as Window; if( win != null ) { OpenedWindows.Remove( win ); } } void CloseAllWindows() { // obviously will not work because we can't // remove items as we iterate the collection // (the close event removes the window from the collection) OpenedWindows.ForEach( x => x.Close() ); // works fine, but would like to know how to do // this with delegates / events. while( OpenedWindows.Any() ) { OpenedWindows[0].Close(); } } } Specifically, within the CloseAllWindows() method, how could you iterate the collection to call the close event, but defer the event being raised until the collection has been completely iterated?

  Read the article

• Striped table rows in ASP.NET MVC (without using jQuery or equivalent)

  - by Richard Ev

  When using an ASP.NET WebForms ListView control to display data in an HTML table I use the following technique in to "stripe" the table rows: <ItemTemplate> <tr class="<%# Container.DisplayIndex % 2 == 0 ? "" : "alternate" %>"> <!-- table cells in here --> </tr> </ItemTemplate> With the following CSS: tr.alternate { background-color: #EFF5FB; } I have just gone through the ASP.NET MVC Movie Database Application tutorial and learnt that in MVC-land table rows can be (must be?) constructed as follows: <% foreach (var item in Model) { %> <tr> <td> <%= Html.Encode(item.Title) %> </td> <!-- and so on for the rest of the table cells... --> </tr> <% } %> What can I add to this code to stripe the rows of my table? Note: I know that this can be done using jQuery, I want to know if it can be done another way. Edit If jQuery (or equivalent) is in your opinion the best or most appropriate post, I'd be interested in knowing why.

  Read the article

• Prevent jQuery Tabs to bind to <ul> elements below the main <ul> element.

  - by Shiki

  Hi, I have this HTML: <div id="mytabs"> <ul id="main-tabs"> <li><a href="">Link</a></li> <li><a href="">Link</a></li> <li class="filter"> <ul id="filter-controls"> <li><a href="">Filter by something</a></li> <li><a href="">Filter by something</a></li> <li><a href="">Filter by something</a></li> </ul> </li> </ul> </div> And I set it to a tabbed control: $('#mytabs').tabs(); My problem is jQuery UI also converts the <li> elements in <ul id="filter-controls"> into tabs. Is there a way to instruct jQuery UI to only set the <li> children of <ul id="main-tabs"> as the tabs? Note: I am currently in no position to change <ul id="filter-controls" into a non-ul element.

  Read the article

• Job queueing and execute Mechanism

  - by Calm Storm

  In my webservice all method calls submits jobs to a queue. Basically these operations take long time to execute, so all these operations submit a Job to a queue and return a status saying "Submitted". Then the client keeps polling using another service method to check for the status of the job. Presently, what I do is create my own Queue, Job classes that are Serializable and persist these jobs (i.e, their serialized byte stream format) into the database. So an UpdateLogistics operation just queues up a "UpdateLogisticsJob" to the queue and returns. I have written my own JobExecutor which wakes up every N seconds, scans the database table for any existing jobs, and executes them. Note the jobs have to persisted because these jobs have to survive app-server crashes. This was done a long time ago, and I used bespoke classes for my Queues, Jobs, Executors etc. But now, I would like to know has someone done something similar before? In particular, Are there frameworks available for this ? Something in Spring/Apache etc Any framework that is easy to adapt/debug and plays well along with libraries like Spring will be great.

  Read the article

• Selenium - Wait for network traffic

  - by Joel

  We're using Selenium with the Java API and some Javascript user extensions. We use a lot of AJAX calls in our app. A lot of our tests fail randomly because sometimes the AJAX calls finish slower than other times so the page isn't fully loaded. We fix that by waiting for specific elements or Thread.sleep. I was trying to find a way to instead just wait for the network traffic to finish. So that we could do this: selenium.click("some JS button"); selenium.waitForNetwork(); assertTrue(something); That way we can get rid of the thread sleep and have tests pass faster when the server responds faster and not have so many tests fail due to timing issues. I haven't been able to find a way to do this searching Google. Does anyone have any ideas how we can accomplish this? (Preferably either through Javascript or the Java API but all suggestions are welcome). Note: the other variations of "waitFor" are not what I'm looking for. We're already using those in clicks and other things. I'm looking for something that waits for the NETWORK TRAFFIC. Thanks for all the feedback, I'll be trying out a couple of the suggestions, but I'm still open to other ideas. Thanks.

  Read the article

• datagridviewcomboboxcolumn with datasource issue?

  - by Sarrrva

  i have some propblem in datagridviewcombobocolumn with custom datasource property in vb.net. when i add datasource it does not populate in datagridview combobox column it giving nothing.. any one please help me out from this problem... code comboboxcell: Public Overrides Sub InitializeEditingControl(ByVal rowIndex As Integer, ByVal initialFormattedValue As Object, ByVal dataGridViewCellStyle As DataGridViewCellStyle) ' Set the value of the editing control to the current cell value. MyBase.InitializeEditingControl(rowIndex, initialFormattedValue, dataGridViewCellStyle) Dim ctl As ComboEditingControl = CType(DataGridView.EditingControl, ComboEditingControl) ctl.DropDownStyle = ComboBoxStyle.DropDown ctl.AutoCompleteSource = AutoCompleteSource.ListItems ctl.AutoCompleteMode = System.Windows.Forms.AutoCompleteMode.Suggest If (Me.DataGridView.Rows(rowIndex).Cells(0).Value <> Nothing) Then Dim GetValueFromRowToUseForBuildingCombo As String = Me.DataGridView.Rows(rowIndex).Cells(0).Value.ToString() ctl.Items.Clear() Dim dt As New DataTable() Try dt = TryCast(DirectCast(Me.DataGridView.Columns(ColumnIndex), ComboColumn).DataSource, DataTable) Catch ex As Exception MsgBox("error") End Try If (dt Is Nothing) Then ctl.Items.Add("") Else Dim thing As DataRow For Each thing In dt.Rows ctl.Items.Add(thing(0).ToString) Next End If If Me.Value Is Nothing Then ctl.SelectedIndex = -1 Else ctl.SelectedItem = Me.Value End If ctl.EditingControlDataGridView = Me.DataGridView End If End Sub from code: Dim widgets As New WidgetDataHandler Dim obj = widgets.GetAllWigetTypes() Dim dt As New DataTable Dim ListofmyObjects As New List(Of widget_types)(obj) Dim objList As New cObjectToTable(Of widget_types)(ListofmyObjects) dt = objList.GetTable() Dim obj1 For Each obj1 In obj blPersons.Add(obj1) Next Dim col1 As New DataGridViewTextBoxColumn col1.DisplayIndex = 0 col1.DataPropertyName = "Id" col1.HeaderText = "Id" dgvi00.Columns.Add(col1) Dim col2 As New ComboColumn col2.DisplayIndex = 1 col2.SortMode = DataGridViewColumnSortMode.Automatic col2.HeaderText = "Name" col2.DataPropertyName = "Name" col2.ToolTipText = "Select something from my combo" Dim dst As New DataSet 'Dim dt1 As New DataTable 'dt1.Columns.Add(col2.HeaderText) 'For Each thing In dt.Rows ' MsgBox(thing(1).ToString) ' dt1.Rows.Add(thing(1).ToString) 'Next dst.Tables.Add(dt) col2.DataSource = dst.Tables(0) col2.DisplayMember = "Name" Me.dgvi00.Columns.AddRange(col2) dgvi00.DataSource = blPersons.BindingSource 'setup the bindings for the binding navigator Dim bn As New _365_Media_Library.BindingNavigatorWithFilter bn.Dock = DockStyle.Bottom bn.GripStyle = ToolStripGripStyle.Hidden Me.Controls.Add(bn) bn.BindingSource = blPersons.BindingSource note : its working good in standalone application regards and thanks sarva

  Read the article

• Storing large numbers of varying size objects on disk

  - by Foredecker

  I need to develop a system for storing large numbers (10's to 100's of thousands) of objects. Each object is email-like - there is a main text body, and several ancillary text fields of limited size. A body will be from a few bytes, to several KB in size. Each item will have a single unique ID (probably a GUID) that identifies it. The store will only be written to when an object is added to it. It will be read often. Deletions will be rare. The data is almost all human readable text so it will be readily compressible. A system that lets me issue the I/Os and mange the memory and caching would be ideal. I'm going to keep the indexes in memory, using it to map indexes to the single (and primary) key for the objects. Once I have the key, then I'll load it from disk, or the cache. The data management system needs to be part of my application - I do not want to depend on OS services. Or separately installed packages. Native (C++) would be best, but a manged (C#) thing would be ok. I believe that a database is an obvious choice, but this needs to be super-fast for look up and loading into memory of an object. I am not experienced with data base tech and I'm concerned that general relational systems will not handle all this variable sized data efficiently. (Note, this has nothing to do with my job - its a personal project.) In your experience, what are the viable alternatives to a traditional relational DB? Or would a DB work well for this?

  Read the article

• The HTTP verb POST used to access path '[my path]' is not allowed.

  - by Jed

  I am receiving an error that states: "The HTTP verb POST used to access path '[my path]' is not allowed.". The error is being caused by the fact that I am implementing an HTML form element that uses the POST method and does not explicitly define an .aspx page in its ACTION parameter. For example: <form action="" method="post"> <input type="submit" /> </form> The HTML above is on a file at "/foo/default.aspx". Now, if the user points the URL to the root directory "foo" without specifying the aspx file (i.e. "http://localhost/foo") and then submits the form, the error "The HTTP verb POST used to access path '/foo' is not allowed." will be thrown. However, if the user goes to "http://localhost/foo/default.aspx" and then submits the form, all goes well (even if the ACTION parameter is left empty). Note: If I explicitly add the name of the .aspx (default.aspx) page to the ACTION parameter, no errors are thrown. So the example below works fine regardless if the user defines the name of the file in the URL or not. <form action="default.aspx" method="post"> <input type="submit" /> </form> I was curious as to why the error was being thrown, so I read a Microsoft KB that states This problem occurs because a client makes an HTTP request by sending the POST method to a static HTML page. Static HTML pages do not support the POST method. I suppose the core of the explanation makes sense, however in my case, my form is not being sent to a static html page - it's being sent to the same page that the html form lives on (default.aspx)... this is implicit to an ACTION param that is left empty. Is it possible to configure IIS (or otherwise) that will allow us to do form POSTing and keep the ACTION param empty?

  Read the article

• How to animate button text? (loading type of animation) - jquery?

  - by AL

  I got something that I want to do and want to see what you guys think and how can it be implemented. I got a form in a page and the form will submit to itself to perform some process (run functions) in a class. Upon clicking the submit button, I want to animate the button text to “SUBMIT .” -> “SUBMIT ..” -> “SUBMIT …” -> “SUBMIT ….” -> “SUBMIT ….” and then back again. Sort of “animate” the button text. Once the whole process is done, the button text will goes back to be “SUBMIT” text again. Please note that I am not looking for image button solution, meaning that I do not want to implement gif animated button image. Anyone done this before or know how this can be done? I have google but seems nothing of this kind to be found. Thanks! AL

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >