Search Results

Search found 24641 results on 986 pages for 'content provider'.

Page 446/986 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

  • REST API error return good practices

    - by Remus Rusanu
    I'm looking for guidance on good practices when it comes to return errors from a REST API. I'm working on a new API so I can take it any direction right now. My content type is XML at the moment, but I plan to support JSON in future. I am now adding some error cases, like for instance a client attempts to add a new resource but has exceeded his storage quota. I am already handling certain error cases with HTTP status codes (401 for authentication, 403 for authorization and 404 for plain bad request URIs). I looked over the blessed HTTP error codes but none of the 400-417 range seems right to report application specific errors. So at first I was tempted to return my application error with 200 OK and a specific XML payload (ie. Pay us more and you'll get the storage you need!) but I stopped to think about it and it seems to soapy (/shrug in horror). Besides it feels like I'm splitting the error responses into distinct cases, as some are http status code driven and other are content driven. So what is the SO crowd recommendation? Good practices (please explain why!) and also, from a client pov, what kind of error handling in the REST API makes life easier for the client code?

    Read the article

  • My NetGear router suddenly started showing limited access for all wifi connected laptops

    - by Yasser
    I have netgear n300 router which I had installed about 6 months back. Here is how the setup is, I have a local internet provider by the name of "Hathway" they have this modem which is in turn connected to the router and a wire from router is connected to my desktop. As shown in this pic below, except for the laptop I use a desktop rest all the connection is same So with this connection and the below configuration, every thing worked fine. The desktop would work also all my laptops and mobile devices would connect and be able to access the internet without any problem. Now suddenly since yesterday (with no changes made whatsoever to this config) all my laptops start showing the limited connection message and cannot connect to the internet. However the desktop which is connected can access the internet. Can someone please guide me on this.

    Read the article

  • What are some programming techniques for converting SD images to HD images

    - by Dr Dork
    I'm taking programming class and instructor loves to work with images so most of our assignments involve manipulating raw RGB image data. One of our assignments is to implement a standard image converter that converts SD images to HD images and vice versa. I always take advantage of these types of assignments to go a little beyond what we were asked to do, so I added a basic anti-aliasing process that uses the average pixel color of the 3x3 surrounding pixels to improve the converted image. While it helps a bit, the resulting image still doesn't look good, which is ok because it's not expected to for the assignment. I've learned that converting an SD to HD images has shown to be much harder than down sampling to SD from HD just because SD to HD effectively involves increasing resolution when it is not there. Obviously, it is hard to create pixels from nothing, but I'd like enhance my anti-aliasing to something that provides better results when upscaling an image. Most of the techniques I find and read on the internet are far beyond my level of image processing and programming. Can anybody suggest any better methods or processes to create good HD content from SD content that may be within my programming skill level? I know that's a difficult thing to gauge since you don't know me, but perhaps knowing that I can write c++ code to read in raw RGB data and upscale/downscale it with simple average-anti-aliasing will give you an idea. Thanks in advance for all your help!

    Read the article

  • UIView: how to do non-destructive drawing?

    - by Caffeine Coma
    My original question: I'm creating a simple drawing application and need to be able to draw over existing, previously drawn content in my drawRect. What is the proper way to draw on top of existing content without entirely replacing it? Based on answers received here and elsewhere, here is the deal. You should be prepared to redraw the entire rectangle whenever drawRect is called. You cannot prevent the contents from being erased by doing the following: [self setClearsContextBeforeDrawing: NO]; This is merely a hint to the graphics engine that there is no point in having it pre-clear the view for you, since you will likely need to re-draw the whole area anyway. It may prevent your view from being automatically erased, but you cannot depend on it. To draw on top of your view without erasing, do your drawing to an off-screen bitmap context (which is never cleared by the system.) Then in your drawRect, copy from this off-screen buffer to the view. Example: - (id) initWithCoder: (NSCoder*) coder { if (self = [super initWithCoder: coder]) { self.backgroundColor = [UIColor clearColor]; CGSize size = self.frame.size; drawingContext = [self createDrawingBufferContext: size]; } return self; } - (CGContextRef) createOffscreenContext: (CGSize) size { CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); CGContextRef context = CGBitmapContextCreate(NULL, size.width, size.height, 8, size.width*4, colorSpace, kCGImageAlphaPremultipliedLast); CGColorSpaceRelease(colorSpace); CGContextTranslateCTM(context, 0, size.height); CGContextScaleCTM(context, 1.0, -1.0); return context; } - (void)drawRect:(CGRect) rect { UIGraphicsPushContext(drawingContext); CGImageRef cgImage = CGBitmapContextCreateImage(drawingContext); UIImage *uiImage = [[UIImage alloc] initWithCGImage:cgImage]; UIGraphicsPopContext(); CGImageRelease(cgImage); [uiImage drawInRect: rect]; [uiImage release]; } TODO: can anyone optimize the drawRect so that only the (usually tiny) modified rectangle region is used for the copy?

    Read the article

  • Simplepie - fetch feeds from database

    - by krike
    I want to fetch multiple feeds from the database and in so doing fetch all new content from those feeds it works but there is a problem and I have no idea what's causing it, this is the code: $feed_sql = mysqli_query($link, "SELECT feed from tutorial_feed WHERE approved=1"); $feeds = array(); $i = 0; while($feed_r = mysqli_fetch_object($feed_sql)): $feeds[$i] .= $feed_r->feed; $i++; endwhile; $feed = new SimplePie($feeds); $feed-handle_content_type(); foreach($feed-get_items(0, 100) as $item) : echo $item-get_permalink().""; endforeach; I first get Notice: Undefined offset: 0 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 1 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 2 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 3 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 4 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 5 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 6 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 7 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 8 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 9 in I:\wamp\www\cmstut\includes\cron.php on line 22 Notice: Undefined offset: 10 in I:\wamp\www\cmstut\includes\cron.php on line 22 and then it will start printing the permalinks to the new content based on the imported feeds, I know undefined offset means it does not exist but I don't get it, any help would be appreciated

    Read the article

  • webcam refreshing image in iframe not working IE

    - by Nix
    I'm trying to show images from this webcam http://regacam.usz.ch/cgi-bin/guestimage.html on an html page by putting an iframe in pointing to another page that has an image tag in it. But it isn't working in IE (I just see a little cross where the image should be), Firefox is ok. Here the page with the image in: <html> <head> <meta http-euqiv="refresh" content="5"> </head> <body> <img src="http://regacam.usz.ch/cgi-bin/faststream.jpg?stream=full&fps=0.01667&rand=295543" width="200" height="150"/> </body> <html> and the iframe: <div id="rightcontainer"> <iframe id="rightframe" src="zurich.html" name="content" frameborder="0"></iframe> </div> I tried a different webcam elsewhere and that works ok in both browsers. Is there something odd about the one in my example? I got the link in src by right-clicking and copying the image location - is that the right way to go about it?

    Read the article

  • Linux server cannot be pinged

    - by misamisa
    I have set up a Linux server in DMZ. There is another Windows server running in same DMZ. These two servers can be pinged via internet using my home PC. However, the another Linux server rented from a hosting service provider can only be pinged from the Windows Server and not from the Linux server (accessed via internet). So the situation is: Windows server (DMZ) ---ping--- Rented Server.....Successful Linux server (DMZ) ---ping--- Rented Server.......Unreachable Home PC ---ping--- Linux server (DMZ).......Successful Home PC ---ping--- Windows server (DMZ).....Successful When I ran tcpdump on my Linux Server(DMZ) and started ping from Rented Server, it showed that the Linux Server(DMZ) is receiving ping and replying. There is no restriction defined in hosts.deny and hosts.allow file that might cause this problem. What else should I check to get this working?

    Read the article

  • how to tile 3D mesh with image brush in XAML

    - by MC9000
    I have a 2D square in a ViewPort3D that I want to do a tiling of an image (like a checkerboard or flooring with "tiles" effect). I've created an image brush (the image is 50x50 pixels, the surface 250x550 pixels) and a viewport (trying to follow MS's site - though their example is for 2D), but only 1 of the colors in the "tile" image shows up and no tiling is seen. I can't find a single example on the Internet and MS's site has no info (that I can find) on 3D XAML anywhere, so I'm stumped as how to actually do this. <Viewport3D> <Viewport3D.Camera> <PerspectiveCamera Position="125,790,120" LookDirection="0,-.7,-0.25" UpDirection="0,0,1" /> </Viewport3D.Camera> <ModelVisual3D> <ModelVisual3D.Content> <Model3DGroup> <AmbientLight Color="white" /> <GeometryModel3D> <GeometryModel3D.Geometry> <MeshGeometry3D Positions="0,0,0 250,0,0 250,550,0 0,550,0 " TriangleIndices="0 1 3 1 2 3 "/> </GeometryModel3D.Geometry> <GeometryModel3D.Material> <DiffuseMaterial> <DiffuseMaterial.Brush> <ImageBrush ViewportUnits="Absolute" TileMode="Tile" ImageSource="testsquare.gif" Viewport="0,0,50,50" Stretch="None" ViewboxUnits="Absolute" /> </DiffuseMaterial.Brush> </DiffuseMaterial> </GeometryModel3D.Material> </GeometryModel3D> </Model3DGroup> </ModelVisual3D.Content> </ModelVisual3D> </Viewport3D>

    Read the article

  • Insane Graphics.lineStyle behavior

    - by Simon
    Hi all, I'd like some help with a little project of mine. Background: i have a little hierarchy of Sprite derived classes (5 levels starting from the one, that is the root application class in Flex Builder). Width and Height properties are overriden so that my class always remembers it's requested size (not just bounding size around content) and also those properties explicitly set scaleX and scaleY to 1, so that no scaling would ever be involved. After storing those values, draw() method is called to redraw content. Drawing: Drawing is very straight forward. Only the deepest object (at 1-indexed level 5) draws something into this.graphics object like this: var gr:Graphics = this.graphics; gr.clear(); gr.lineStyle(0, this.borderColor, 1, true, LineScaleMode.NONE); gr.beginFill(0x0000CC); gr.drawRoundRectComplex(0, 0, this.width, this.height, 10, 10, 0, 0); gr.endFill(); Further on: There is also MouseEvent.MOUSE_WHEEL event attached to the parent of the object that draws. What handler does is simply resizes that drawing object. Problem: Screenshot When resizing sometimes that hairline border line with LineScaleMode.NONE set gains thickness (quite often even 10 px) + it quite often leaves a trail of itself (as seen in the picture above and below blue box (notice that box itself has one px black border)). When i set lineStile thickness to NaN or alpha to 0, that trail is no more happening. I've been coming back to this problem and dropping it for some other stuff for over a week now. Any ideas anyone? P.S. Grey background is that of Flash Player itself, not my own choise.. :D

    Read the article

  • Absolute positioning in IE6, using left: 0; and right: 0; simultaneously

    - by Zane
    Here is my website: http://dagwaging.110mb.com/ View it in any good browser, then in IE6. It dies in IE6. It seems that in IE6, one can't do this: div { position: absolute; left: 0px; right: 0px; } or this: div { position: absolute; top: 0px; bottom: 0px; } Absolute positions cannot be set for left and right or top and bottom at the same time. This is terrible, because that is pretty much the basis of my site design. The HTML can be viewed on the site, and the CSS is in /style.css. I'd like to fix this without invalidating my CSS or HTML. Can this be done? Another problem is that my content uses min-width and max-width to avoid over-stretching or compressing the content within. IE6 can't do min-width, so how can I replicate this behavior?

    Read the article

  • ASP.MVC 2 RTM + ModelState Error at Id property

    - by Zote
    I have this classes: public class GroupMetadata { [HiddenInput(DisplayValue = false)] public int Id { get; set; } [Required] public string Name { get; set; } } [MetadataType(typeof(GrupoMetadata))] public partial class Group { public virtual int Id { get; set; } public virtual string Name { get; set; } } And this action: [HttpPost] public ActionResult Edit(Group group) { if (ModelState.IsValid) { // Logic to save return RedirectToAction("Index"); } return View(group); } That's my view: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<Group>" %> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <% using (Html.BeginForm()) {%> <fieldset> <%= Html.EditorForModel() %> <p> <input type="submit" value="Save" /> </p> </fieldset> <% } %> <div> <%=Html.ActionLink("Back", "Index") %> </div> </asp:Content> But ModelState is always invalid! As I can see, for MVC validation 0 is invalid, but for me is valid. How can I fix it since, I didn't put any kind of validation in Id property? UPDATE: I don't know how or why, but renaming Id, in my case to PK, solves this problem. Do you know if this an issue in my logic/configuration or is an bug or expected behavior? Thank you

    Read the article

  • Free tools/libraries to compare tables with filtering for SQL Server 2008 and visualize/sync diffs t

    - by MicMit
    I am building certain GUI in C# for a content manager and looking for the tools or code snippets or open libraries ( code ideally in C# ) which allow me the following : 1. For table A in database X (test ) and table A in database Y (production) and for a simple filter ( e.g. listname = "XYZ" ) I need to show additions/deletions/updates in some way. which might be side-by-side or just html report 2 record added html table with some fields 2 record deleted html table with some fields Considering that this task is very common, I guess, certain components should exist ? Components either return some collections from parameters given for further visualizing or just produce reports mentioned above. 2. I need to push changes for the filter I mentioned in 1 and update table in production database for this filter only ( ie for the particular list approved by content person). Again probably there are certain SQL code generators - components in addition to diffs or standalone. 3. The key thing tools/libraries - should be suitable for integration with the existing application in C#.

    Read the article

  • forcing a child component to resize itself larger than its container

    - by Josh
    I am creating a component that displays a variable amount of "gauges" (square tiles of content if you will), that is laid out like so: <HDividedBox id="container"> <VBox id="myComponent"> <HBox id="header"> ...header content... </HBox> <Tile id="body"> ...gauges are added to the body... </Tile> </Vbox> </HDividedBox> The body Tile has a horizontal direction. When I drag the HDividedBox to make myComponent smaller, the body component will get smaller as well, and eventually if there are too many gauges to fit horizontally, they will be bumped to the next row, and thus the smaller I make myComponent, the number of vertically stacked gauges grows. This is all well and good. The problem is, no matter what combination of settings I use, I absolutely cannot get the body (a Tile) to size itself beyond the size of myComponent, which would ideally cause myComponent to scroll vertically. Even setting the maxHeight of the body to some huge value, it will never size itself larger than it's container. Any ideas on how to accomplish this? Thanks

    Read the article

  • How to set up an SSL Cert with Subject Alternative Name

    - by Darren Oster
    To test a specific embedded client, I need to set up a web server serving a couple of SSL (HTTPS) sites, say "main.mysite.com" and "alternate.mysite.com". These should be handled by the same certificate, with a Subject Name of "main.mysite.com" and a Subject Alternative Name of "alternate.mysite.com". This certificate needs to be in an authority chain back to a 'proper' CA (such as GoDaddy, to keep the cost down). My question is, are there any good tutorials on how to do this, or can someone explain the process? What sort of parent certificate do I need to purchase from the CA provider? My understanding of SSL certificates is limited, but as Manuel said in Fawlty Towers, "I learn...". I'm happy to work in Windows (IIS) or Linux (Apache) (or even OSX, for that matter). Thanks in advance.

    Read the article

  • Troubleshooting FORM POST problems

    - by brettr
    I'm using the following code to submit to a WCF service. I keep getting an error that the key is invalid. I have a webpage on the same server that I submit the same data (but different key) using a FORM POST. It works fine that way. I put the URL below all in a URL (including valid key from server webpage) and get the key is invalid error. I'm thinking the data I'm submitting through the iPhone isn't really going across as a FORM POST but rather as a URL. Is there anything I may be doing wrong in the following code or any other suggestions? NSString *stringForURL = @"https://abc.com/someservice.aspx"; NSURL *URL=[[NSURL alloc] initWithString:stringForURL]; NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:URL]; NSString *request_body = [NSString stringWithFormat:@"prop1=value1&key=%@", [@"r2xHEuzgDTQEWA5Xe6+k9BSVrgsMX2mWQBW/39nqT4s=" stringByAddingPercentEscapesUsingEncoding:NSUTF8StringEncoding]]; NSData *postData = [request_body dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:YES]; NSString *postLength = [NSString stringWithFormat:@"%d", [postData length]]; [request setValue:postLength forHTTPHeaderField:@"Content-Length"]; [request setHTTPMethod:@"POST"]; [request setValue:@"application/x-www-form-urlencoded" forHTTPHeaderField:@"Content-Type"]; [request setHTTPBody:postData]; NSURLConnection *connection = [[NSURLConnection alloc] initWithRequest:request delegate:self]; [NSThread sleepForTimeInterval:1]; self.receivedData = [[NSMutableData data] retain];

    Read the article

  • Remote host: can tracert, can telnet, can*not* browse: what gives?

    - by MacThePenguin
    One of my customers of the company I work for has made a change to their Internet connection, and now we can't connect to them any more from our LAN. To help me troubleshoot this issue, the network guy on the customer's site has configured their firewall so that a HTTPS connection to their public IP address is open to any IP. I should put https://<customer's IP> in my browser and get a web page. Well, it works from any network I've tried (even from my smartphone), just not from my company's LAN. I thought it may be an issue with our firewall (though I checked its rules and it allows outbound TCP port 443 to anywhere), so I just connected a PC directly to the network connection of our provider, bypassing out firewall completely, and still it didn't work (everything else worked). So I asked for help to our Internet provider's customer service, and they asked me to do a tracert to our customer's IP. The tracert is successful, as the final hop shown in the output is the host I want to reach. So they said there's no problem. :( I also tried telnet <customer's IP> 443 and that works as well: I get a blank page with the cursor blinking (I've tried using another random port and that gives me an error message, as it should). Still, from any browser of any PC in my LAN I can't open that URL. I tried checking the network traffic with Wireshark: I see the packages going through and answers coming back, thought the packets I see passing are far less than they are if I successfully connect to another HTTPS website. See the attached screenshot: I had to blur the IPs, anyway the longer string is my PC's local IP address, the shorter one is the customer's public IP. I don't know what else to try. This is the only IP doing this... Any idea what could I try to find a solution to this issue? Thanks, let me know if you need further details. Edit: when I say "it doesn't work" I mean: the page doesn't open, the browser keeps loading for a long time and eventually shows an error saying that the page cannot be opened. I'm not in my office now so I can't paste the exact message, but it's the usual message you get when the browser reaches its timeout. When I say "it works", I mean the browser loads and shows a webpage (it's the logon page for the customers' firewall admin interface: so there's the firewall brand's logo and there are fields to enter a user id and a password). Update 13/09/2012: tried again to connect to the customer's network through our Internet connection without a firewall. This is what I did: Run a Kubuntu 12.04 live distro on a spare laptop; Updated all the packages I could and installed WireShark; Attached it to my LAN and verified that I couldn't open https://<customer's IP>. Verified that the Wireshark trace for this attempt was the same as the one I've already posted; Verified that I could connect to another customer's host using rdesktop (it worked); Tried to rdesktop to <customer's IP>, here's the output: kubuntu@kubuntu:/etc$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: recv: Connection reset by peer Disconnected the laptop from the LAN; Disconnected the firewall from the Extranet connection, connected the laptop instead. Set its network configuration so that I could access the Internet; Verified that I could connect to other websites in http and https and in RDP to other customers' hosts - it all worked as expected; Verified that I could still traceroute to <customer's IP>: I could; Verified that I still couldn't open https://<customer's IP> (same exact result as before); Checked the WireShark trace for this attempt and noticed a different behaviour: I could see packets going out to the customer's IP, but no replies at all; Tried to run rdesktop again, with a slightly different result: kubuntu@kubuntu:/etc/network$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: <customer's IP>: unable to connect Finally gave up, put everything back as it was before, turned off the laptop and lost the WireShark traces I had saved. :( I still remember them very well though. :) Can you get anything out of it? Thank you very much. Update 12/09/2012 n.2: I followed the suggestion by MadHatter in the comments. From inside the firewall, this is what I get: user@ubuntu-mantis:~$ openssl s_client -connect <customer's IP>:443 CONNECTED(00000003) If I now type GET / the output pauses for several seconds and then I get: write:errno=104 I'm going to try the same, but bypassing the firewall, as soon as I can. Thanks. Update 12/09/2012 n.3: So, I think ISA Server is altering the results of my tests... I tried installing Wireshark directly on the firewall and monitoring the packets on the Extranet network card. When the destination is the customer's IP, whatever service I try to connect to (HTTPS, RDP or SAProuter), I can only see outbound packets and no response packets whatsoever from their side. It looks like ISA Server is "faking" the remote server's replies, that's why I get a connection using telnet or the openSSL client. This is the wireshark trace from inside our LAN: But this is the trace on the Extranet network card: This makes a bit more sense... I'll send this info to the customer's tech and see if he can make anything out of it. Thanks to all that took the time to read my question and post suggestions. I'll update this post again.

    Read the article

  • Object doesn't support property or method 'transformNode' in Internet Explorer 10 (Windows 8)

    - by John Chapman
    I am having some JavaScript issues that seem to only occur in Internet Explorer 10 on Windows 8 (IE 7, 8, and 9 all work fine). The basic jist of what I am doing is getting XML and XSL from a web service and then transforming them in JavaScript to render on the page using the Sys.Net.XMLDOM object. XMLDOM = Sys.Net.XMLDOM; var xsl = // XSL gotten from somewhere else var xmlString = // XML gotten from somewhere else as a string... var xml = new XMLDOM(xmlString); var content = xml.transformNode(xsl); When I use the above code in IE 10, I get: Object doesn't support property or method 'transformNode' Any ideas on why Internet Explorer 10 is doing this? EDIT I have also tried this: xmldoc = new ActiveXObject("Msxml2.DOMDocument"); xmldoc.async = false; xmldoc.load(xml); xsldoc = new ActiveXObject("Msxml2.DOMDocument"); xsldoc.async = false; xsldoc.load(xsl); var content = xmldoc.transformNode(xsldoc); Which works in all previous versions of IE, but in IE 10 I get: Reference to undeclared namespace prefix: 'atom'.

    Read the article

  • UITableView madness

    - by kesrut
    Hello, I'm new to iPhone application development. I'm trying to understand how to use UITableView. I'm wrote simple code: - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return 1 ; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *MyIdentifier = @"MyIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:MyIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:MyIdentifier] autorelease]; } cell.textLabel.text = @"Hello"; return cell; } UITable shows content, but if i'm drag table contents my application terminates. You can see video: http://www.youtube.com/watch?v=TucTVJVhSD0 I tried to everything with array: - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1 ; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [hello count] ; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *MyIdentifier = @"MyIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:MyIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:MyIdentifier] autorelease]; } cell.textLabel.text = [hello objectAtIndex:indexPath.row]; return cell; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { [tableView deselectRowAtIndexPath:indexPath animated:NO]; NSLog(@"Selected") ; } - (void) awakeFromNib { hello = [[NSArray alloc] initWithObjects:@"hello", @"world", @"end", nil]; } // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; } Content is shown and if I'm selecting item i'm getting: [Session started at 2010-03-16 19:21:48 +0200.] 2010-03-16 19:21:52.295 ViewTest[1775:207] * -[ViewTestViewController respondsToSelector:]: message sent to deallocated instance 0x3911ec0 I'm total new to iPhone programming. And as i see everything i do - i'm just getting application terminated ..

    Read the article

  • problem with mysql character set & GWT

    - by Ehsan Khodarahmi
    Hi I've a SmartGWT application which interacts with a mysql database using rpc services. Suppose it as a simple form with a textbox & two save & load buttons. My database & tables & all fields collation is utf8_persian_ci. All java source files & module html & xml files have saved with utf8 character set. & also I've a meta tag in module html file which contains my form : <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> my application works correctly in eclipse develpment mode & also in my local tomcat server. Then i put it on remote server (I compress it using jar.exe into a war file with -cvf flag & then upload it using my server's plesk control panel). In this mode, when I load data from a mysql table (load a record from any table), data will load into my form with no problem, but when I want to save some data (in persian language), mysql just writes some ? (question sign) in characteristic table fields. Any idea ?

    Read the article

  • How to unit test this simple ASP.NET MVC controller

    - by Frank Schwieterman
    Lets say I have a simple controller for ASP.NET MVC I want to test. I want to test that a controller action (Foo, in this case) simply returns a link to another action (Bar, in this case). How would you test this? (either the first or second link) My implementation has the same link twice. One passes the url throw ViewData[]. This seems more testable to me, as I can check the ViewData collection returned from Foo(). Even this way though, I don't know how to validate the url itself without making dependencies on routing. The controller: public class TestController : Controller { public ActionResult Foo() { ViewData["Link2"] = Url.Action("Bar"); return View("Foo"); } public ActionResult Bar() { return View("Bar"); } } the "Foo" view: <%@ Page Title="" Language="C#" Inherits="System.Web.Mvc.ViewPage" MasterPageFile="~/Views/Shared/Site.Master"%> <asp:Content ContentPlaceHolderID="MainContent" runat="server"> <%= Html.ActionLink("link 1", "Bar") %> <a href="<%= ViewData["Link2"]%>">link 2</a> </asp:Content>

    Read the article

  • Asp.net mvc - trying to display images pulled from db \

    - by Trey Carroll
    //Inherits="System.Web.Mvc.ViewPage<FilmFestWeb.Models.ListVideosViewModel>" <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>ListVideos</h2> <% foreach(BusinessObjects.Video vid in Model.VideoList){%> <div class="videoBox"> <%= Html.Encode(vid.Name) %> <img src="<%= vid.ThumbnailImage %>" /> </div> <%} %> </asp:Content> //ListVideosViewModel public class ListVideosViewModel { public IList<Video> VideoList { get; set; } } //Video public class Video { public long VideoId { get; set; } public long TeamId { get; set; } public string Name { get; set; } public string Tags { get; set; } public string TeamMembers { get; set; } public string TranscriptFileName { get; set; } public string VideoFileName { get; set; } public int TotalNumRatings { get; set; } public int CumulativeTotalScore { get; set; } public string VideoUri { get; set; } public Image ThumbnailImage { get; set; } } I am getting the "red x" that I usually associate with image file not found. I have verified that my database table shows after the stored proc that uploads the image executes. Any insight or advice would be greatly appreciated.

    Read the article

  • How do I display a Wicket Datatable, sorted by a specific column by default?

    - by David
    Hello everyone! I have a question regarding Wicket's Datatable. I am currently using DataTable to display a few columns of data. My table is set up as follows: DataTable<Column> dataTable = new DataTable<Column>("columnsTable", columns, provider, maxRowsPerPage) { @Override protected Item<Column> newRowItem(String id, int index, IModel<Column> model) { return new OddEvenItem<Column>(id, index, model); } }; The columns look like so: columns[0] = new PropertyColumn<Column>(new Model<String>("Description"), "description", "description"); columns[1] = new PropertyColumn<Column>(new Model<String>("Logic"), "columnLogic"); columns[2] = new PropertyColumn<Column>(new Model<String>("Type"), "dataType", "dataType"); Here is my column data provider: public class ColumnSortableDataProvider extends SortableDataProvider<Column> { private static final long serialVersionUID = 1L; private List<Column> list = null; public ColumnSortableDataProvider(Table table) { this.list = Arrays.asList(table.getColumns().toArray(new Column[0])); } public ColumnSortableDataProvider(List<Column> list) { this.list = list; } @Override public Iterator<? extends Column> iterator(int first, int count) { /* first - first row of data count - minimum number of elements to retrieve So this method returns an iterator capable of iterating over {first, first+count} items */ Iterator<Column> iterator = null; try { if(getSort() != null) { Collections.sort(list, new Comparator<Column>() { private static final long serialVersionUID = 1L; @Override public int compare(Column c1, Column c2) { int result=1; PropertyModel<Comparable> model1= new PropertyModel<Comparable>(c1, getSort().getProperty()); PropertyModel<Comparable> model2= new PropertyModel<Comparable>(c2, getSort().getProperty()); if(model1.getObject() == null && model2.getObject() == null) result = 0; else if(model1.getObject() == null) result = 1; else if(model2.getObject() == null) result = -1; else result = ((Comparable)model1.getObject()).compareTo(model2.getObject()); result = getSort().isAscending() ? result : -result; return result; } }); } if (list.size() > (first+count)) iterator = list.subList(first, first+count).iterator(); else iterator = list.iterator(); } catch (Exception e) { e.printStackTrace(); } return iterator; } Sorting by clicking a column works perfectly, but I would like the table to initially be sorted, by default, by the Description column. I am at a loss to do this. If you need to see some other code, please let me know. Thank you in advance!!! - D

    Read the article

  • Objects in JavaScript defined and undefined at the same time (in a FireFox extension)

    - by Alexey Romanov
    I am chasing down a bug in a FireFox extension. I've finally managed to see it for myself (I've only had reports before) and I can't understand how what I saw is possible. One error message from my extension in the Error Console is "gBrowser is not defined". This by itself would be surprising enough, since the overlay is over browser.xul and navigator.xul, and I expect gBrowser to be available from both. Even worse is the actual place where it happens: line 101 of nextplease.js. That is, inside the function isTopLevelDocument, which is only called from onContentLoaded, which is only called from onLoad here: gBrowser.addEventListener(this.loadType, function (event) { nextplease.loadListener.onContentLoaded(event); }, true); So gBrowser is defined in onLoad, but somehow undefined in isTopLevelDocument. When I tried to actually use the extension, I got another error: "nextplease is not defined". The interesting thing is that it happened on lines 853 and 857. That is, inside the functions nextplease.getNextLink = function () { nextplease.getLink(window.content, nextplease.NextPhrasesMap, nextplease.NextImagesMap, nextplease.isNextRegExp, nextplease.NEXT_SEARCH_TYPE); } nextplease.getPrevLink = function () { nextplease.getLink(window.content, nextplease.PrevPhrasesMap, nextplease.PrevImagesMap, nextplease.isPrevRegExp, nextplease.PREV_SEARCH_TYPE); } So nextplease is somehow defined enough to call these functions, but isn't defined inside them. Finally, executing typeof(nextplease) in Execute JS returns "object". Same for gBrowser. How can this happen? Any ideas?

    Read the article

  • Error data: line 2 column 1 when using pycurl with gzip stream

    - by Sagar Hatekar
    Thanks for reading. Background: I am trying to read a streaming API feed that returns data in JSON format, and then storing this data to a pymongo collection. The streaming API requires a "Accept-Encoding" : "Gzip" header. What's happening: Code fails on json.loads and outputs - Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) (Refer Error Log below) This does NOT happen while parsing every JSON object - it happens at random. My guess is I am encountering some weird JSON object after every "x" proper JSON objects. I did reference how to use pycurl if requested data is sometimes gzipped, sometimes not? and Encoding error while deserializing a json object from Google but so far have been unsuccessful at resolving this error. Could someone please help me out here? Error Log: Note: The raw dump of the JSON object below is basically using the repr() method. '{"id":"tag:search.twitter.com,2005:207958320747782146","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:493653150","link":"http://www.twitter.com/Deathnews_7_24","displayName":"Death News 7/24","postedTime":"2012-02-16T01:30:12.000Z","image":"http://a0.twimg.com/profile_images/1834408513/deathnewstwittersquare_normal.jpg","summary":"Crashes, Murders, Suicides, Accidents, Crime and Naturals Death News From All Around World","links":[{"href":"http://www.facebook.com/DeathNews724","rel":"me"}],"friendsCount":56,"followersCount":14,"listedCount":1,"statusesCount":1029,"twitterTimeZone":null,"utcOffset":null,"preferredUsername":"Deathnews_7_24","languages":["tr"]},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"web","link":"http://twitter.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","body":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958320747782146","summary":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nytimes.com/2012/05/30/boo\xe2\x80\xa6","indices":[52,72],"expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html","url":"http://t.co/WBsNlNtA"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":11,"urls":[{"url":"http://t.co/WBsNlNtA","expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html?_r=1"}]}}\r\n{"id":"tag:search.twitter.com,2005:207958321003638785","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:178760897","link":"http://www.twitter.com/Mobanu","displayName":"Donald Ochs","postedTime":"2010-08-15T16:33:56.000Z","image":"http://a0.twimg.com/profile_images/1493224811/small_mobany_Logo_normal.jpg","summary":"","links":[{"href":"http://www.mobanuweightloss.com","rel":"me"}],"friendsCount":10272,"followersCount":9698,"listedCount":30,"statusesCount":725,"twitterTimeZone":"Mountain Time (US & Canada)","utcOffset":"-25200","preferredUsername":"Mobanu","languages":["en"],"location":{"objectType":"place","displayName":"Crested Butte, Colorado"}},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"twitterfeed","link":"http://twitterfeed.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Mobanu/statuses/207958321003638785","body":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958321003638785","summary":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","link":"http://twitter.com/Mobanu/statuses/207958321003638785","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nyti.ms/KUmmMa","indices":[116,136],"expanded_url":"http://nyti.ms/KUmmMa","url":"http://t.co/mTsQlNQO"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":12,"urls":[{"url":"http://t.co/mTsQlNQO","expanded_url":"http://well.blogs.nytimes.com/2012/05/30/can-exercise-be-bad-for-you/?utm_medium=twitter&utm_source=twitterfeed"}]}}\r\n' json exception: Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) Header Output: HTTP/1.1 200 OK Content-Type: application/json; charset=UTF-8 Vary: Accept-Encoding Date: Wed, 30 May 2012 22:14:48 UTC Connection: close Transfer-Encoding: chunked Content-Encoding: gzip get_stream.py: #!/usr/bin/env python import sys import pycurl import json import pymongo STREAM_URL = "https://stream.test.com:443/accounts/publishers/twitter/streams/track/Dev.json" AUTH = "userid:passwd" DB_HOST = "127.0.0.1" DB_NAME = "stream_test" class StreamReader: def __init__(self): try: self.count = 0 self.buff = "" self.mongo = pymongo.Connection(DB_HOST) self.db = self.mongo[DB_NAME] self.raw_tweets = self.db["raw_tweets_gnip"] self.conn = pycurl.Curl() self.conn.setopt(pycurl.ENCODING, 'gzip') self.conn.setopt(pycurl.URL, STREAM_URL) self.conn.setopt(pycurl.USERPWD, AUTH) self.conn.setopt(pycurl.WRITEFUNCTION, self.on_receive) self.conn.setopt(pycurl.HEADERFUNCTION, self.header_rcvd) while True: self.conn.perform() except Exception as ex: print "error ocurred : %s" % str(ex) def header_rcvd(self, header_data): print header_data def on_receive(self, data): temp_data = data self.buff += data if data.endswith("\r\n") and self.buff.strip(): try: tweet = json.loads(self.buff, encoding = 'UTF-8') self.buff = "" if tweet: try: self.raw_tweets.insert(tweet) except Exception as insert_ex: print "Error inserting tweet: %s" % str(insert_ex) self.count += 1 if self.count % 10 == 0: print "inserted "+str(self.count)+" tweets" except Exception as json_ex: print "json exception: %s" % str(json_ex) print repr(temp_data) stream = StreamReader()

    Read the article

  • Weird internet connection behavior

    - by ShadowBroker
    I'm having a strange problem with my internet connection. At the moment my ISP is Fastweb (an italian provider) and i noticed that sometimes i can't load some sites, then all i have to do is wait 5 minutes and then i can load the site again. Some other times, instead, images won't load on certains sites (this always happens with 500px.com or Facebook rarely). I noticed that if i use VPN software like Privitize VPN or Spotflux everything works like a charm. Is something wrong with my internet configuration? Thank you.

    Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >