Search Results

Search found 26043 results on 1042 pages for 'development trunk'.

Page 455/1042 | < Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >

  • Optimal sprite size for rotations

    - by Panda Pajama
    I am making a sprite based game, and I have a bunch of images that I get in a ridiculously large resolution and I scale them to the desired sprite size (for example 64x64 pixels) before converting them to a game resource, so when draw my sprite inside the game, I don't have to scale it. However, if I rotate this small sprite inside the game (engine agnostically), some destination pixels will get interpolated, and the sprite will look smudged. This is of course dependent on the rotation angle as well as the interpolation algorithm, but regardless, there is not enough data to correctly sample a specific destination pixel. So there are two solutions I can think of. The first is to use the original huge image, rotate it to the desired angles, and then downscale all the reaulting variations, and put them in an atlas, which has the advantage of being quite simple to implement, but naively consumes twice as much sprite space for each rotation (each rotation must be inscribed in a circle whose diameter is the diagonal of the original sprite's rectangle, whose area is twice of that original rectangle, supposing square sprites). It also has the disadvantage of only having a predefined set of rotations available, which may be okay or not depending on the game. So the other choice would be to store a larger image, and rotate and downscale while rendering, which leads to my question. What is the optimal size for this sprite? Optimal meaning that a larger image will have no effect in the resulting image. This is definitely dependent on the image size, the amount of desired rotations without data loss down to 1/256, which is the minimum representable color difference. I am looking for a theoretical general answer to this problem, because trying a bunch of sizes may be okay, but is far from optimal.

    Read the article

  • ConsumeStructuredBuffer, what am I doing wrong?

    - by John
    I'm trying to implement the 3rd exercise in chapter 12 of Introduction to 3D Game Programming with DirectX 11, that is: Implement a Compute Shader to calculate the length of 64 vectors. Previous exercises ask you to do the same with typed buffers and regular structured buffers and I had no problems with them. For what I've read, [Consume|Append]StructuredBuffers are bound to the pipeline using UnorderedAccessViews (as long as they use the D3D11_BUFFER_UAV_FLAG_APPEND, and the buffers have both D3D11_BIND_SHADER_RESOURCE and D3D11_BIND_UNORDERED_ACCESS bind flags). Problem is: my AppendStructuredBuffer works, since I can append data to it and retrieve it from the application to write to a results file, but the ConsumeStructuredBuffer always returns zeroed data. Data is in the buffer, since if I change the UAV to a ShaderResourceView and to a StructuredBuffer in the HLSL side it works. I don't know what I am missing: Should I initialize the ConsumeStructuredBuffer on the GPU, or can I do it when I create the buffer (as I amb currently doing). Is it OK to bind the buffer with a UAV as described above? Do I need to bind it as a ShaderResourceView somehow? Maybe I am missing some step? This is the declaration of buffers in the Compute Shader: struct Data { float3 v; }; struct Result { float l; }; ConsumeStructuredBuffer<Data> gInput; AppendStructuredBuffer<Result> gOutput; And here the creation of the buffer and UAV for input data: D3D11_BUFFER_DESC inputDesc; inputDesc.Usage = D3D11_USAGE_DEFAULT; inputDesc.ByteWidth = sizeof(Data) * mNumElements; inputDesc.BindFlags = D3D11_BIND_SHADER_RESOURCE | D3D11_BIND_UNORDERED_ACCESS; inputDesc.CPUAccessFlags = 0; inputDesc.StructureByteStride = sizeof(Data); inputDesc.MiscFlags = D3D11_RESOURCE_MISC_BUFFER_STRUCTURED; D3D11_SUBRESOURCE_DATA vinitData; vinitData.pSysMem = &data[0]; HR(md3dDevice->CreateBuffer(&inputDesc, &vinitData, &mInputBuffer)); D3D11_UNORDERED_ACCESS_VIEW_DESC uavDesc; uavDesc.Format = DXGI_FORMAT_UNKNOWN; uavDesc.ViewDimension = D3D11_UAV_DIMENSION_BUFFER; uavDesc.Buffer.FirstElement = 0; uavDesc.Buffer.Flags = D3D11_BUFFER_UAV_FLAG_APPEND; uavDesc.Buffer.NumElements = mNumElements; md3dDevice->CreateUnorderedAccessView(mInputBuffer, &uavDesc, &mInputUAV); Initial data is an array of Data structs, which contain a XMFLOAT3 with random data. I bind the UAV to the shader using the Effects framework: ID3DX11EffectUnorderedAccessViewVariable* Input = mFX->GetVariableByName("gInput")->AsUnorderedAccessView(); Input->SetUnorderedAccessView(uav); // uav is mInputUAV Any ideas? Thank you.

    Read the article

  • List of Open Source Java Games for Android

    - by BluFire
    I'm wondering if there are any more opensource games than the ones that you can plainly see when you search a list of open source games for android on google. Such as, is there a good website that has compiled open source games? I don't want an answer of "go google it" or "en.wikipedia.org/wiki/List_of_open_source_Android_applications" it gets really annoying on posts when people just give lazy answers.

    Read the article

  • XNA 4.0 2D sidescroller variable terrain heightmap for walking/collision

    - by JiminyCricket
    I've been fooling around with moving on sloped tiles in XNA and it is semi-working but not completely satisfactory. I also have been thinking that having sets of predetermined slopes might not give me terrain that looks "organic" enough. There is also the problem of having to construct several different types of tile for each slope when they're chained together (only 45 degree tiles will chain perfectly as I understand it). I had thought of somehow scanning for connected chains of sloped tiles and treating it as a new large triangle, as I was having trouble with glitching at the edges where sloped tiles connect. But, this leads back to the problem of limiting the curvature of the terrain. So...what I'd like to do now is create a simple image or texture of the terrain of a level (or section of the level) and generate a simple heightmap (of the Y's for each X) for the terrain. The player's Y position would then just be updated based on their X position. Is there a simple way of doing this (or a better way of solving this problem)? The main problem I can see with this method is the case where there are areas above the ground that can be walked on. Maybe there is a way to just map all walkable ground areas? I've been looking at this helpful bit of code: http://thirdpartyninjas.com/blog/2010/07/28/sloped-platform-collision/ but need a way to generate the actual points/vectors.

    Read the article

  • Dynamic body implementation

    - by ArturoVM
    I am writing a 2D game where one of the characters has some very particular requirements. This character is a body with no particular shape (similar to a fluid, but not so much), it has to be able to grow and shrink (as in actually growing, not just scaling), and it has to have collision detection (even if it's basic). Because of this requirements, it obviously can't be based on a sprite, so direct rendering of the shape should be the logical thing to do. I assume this is no easy task, but I just couldn't find a good physics engine that covers these requirements (or at least no tutorial on how to do it; I particularly searched for Box2D tutorials). Is there a way of doing this with Box2D, SDL, or any other physics or game engine out there? If not, what's a good place to start? I am really clueless as far as soft-body physics are concerned.

    Read the article

  • XNA frame rate spikes in full screen mode

    - by ProgrammerAtWork
    I'm loading a simple texture and rotating it in XNA, and this works. But when I run it in full screen 1920x1080 mode I see spikes while my texture is rotating. If I run it windowed with 1920x1080 resolution, I don't get the spikes. The size of the texture does not seem to matter, I tried 512 texture size and 2048 texture size, same thing happens. Spikes in full screen, no spikes in windowed, resolution does not seem to matter, Debug or Release does not seem to do anything either. Anyone got ideas of what could be the problem? Edit: I think this problem has something to do with the vertical retrace. Set this property: _graphicsDeviceManager.SynchronizeWithVerticalRetrace = false; you'll lose vsync but it will not stutter.

    Read the article

  • How to implement a game launch counter in LibGDX

    - by Vishal Kumar
    I'm writing a game using LibGDX in which I want to save the number of launches of a game in a text file. So, In the create() of my starter class, I have the following code ..but it's not working public class MainStarter extends Game { private int count; @Override public void create() { // Set up the application AppSettings.setUp(); if(SettingsManager.isFirstLaunch()){ SettingsManager.createTextFileInLocalStorage("gamedata"); SettingsManager.writeLine("gamedata", "Launched:"+count ,FileType.LOCAL_FILE ); } else{ SettingsManager.writeLine("gamedata", "Not First launch :"+count++ ,FileType.LOCAL_FILE ); } // // Load assets before setting the screen // ##################################### Assets.loadAll(); // Set the tests screen setScreen(new MainMenuScreen(this, "Main Menu")); } } What is the proper way to do this?

    Read the article

  • Checking whether a specific key was pressed in enchantJS

    - by MxyL
    I am using enchantJS and would like to use the letters and numbers as well as numpad on a keyboard to do different things (eg: hotkeys). From this page http://users.csc.calpoly.edu/~foaad/enchant/guide/playerInput.html By default, enchant.js provides input listeners for six buttons: UP, DOWN, LEFT, RIGHT, A, and B. By default, the directions are bound to the arrow keys. Any of the six buttons may also be bound to any key with an ASCII value. We’ll address that later. So enchant provides the ability to bind keys to different input such as up, down, left, right...but how can I simply check whether the D or X key was pressed, and if so, perform certain actions based on that event?

    Read the article

  • Generating grammatically correct MUD-style attack descriptions

    - by Extrakun
    I am currently working on a text based game, where the outcome of a combat round goes something like this %attacker% inflicts a serious wound (12 points damage) on %defender% Right now, I just swap %attacker% with the name of the attacker, and %defender% for the name of the defender. However, the description works, but don't read correctly. Since the game is just all text, I don't want to resort to generic descriptions (Such as "You use Attack on Goblin for 5 damage", which arguably solve the problem) How do I generate correct descriptions for cases where %attacker% refers to "You", the player? "You inflicts..." is wrong "Bees", or other plural? I need somehow to know I should prefix the name with a "The " If %attacker% is a generic noun, such as "Goblin", it will read weird as opposed to %attacker% being a name. Compare "Goblin inflicts..." vs. "Aldraic Swordbringer inflicts...." How does text-based games usually resolve such issues?

    Read the article

  • Normal map lighting bug in bottom right quadrant

    - by Ryan Capote
    I am currently working on getting normal maps working in my project, and have run into a problem with lighting. As you can see, the normals in the bottom right quadrant of the lighting isn't calculating the correct direction to the light or something. Best seen by the red light If I use flat normals (z normal = 1.0), it seems to be working fine: normals for the tile sheet: Shader: #version 330 uniform sampler2D uDiffuseTexture; uniform sampler2D uNormalsTexture; uniform sampler2D uSpecularTexture; uniform sampler2D uEmissiveTexture; uniform sampler2D uWorldNormals; uniform sampler2D uShadowMap; uniform vec4 uLightColor; uniform float uConstAtten; uniform float uLinearAtten; uniform float uQuadradicAtten; uniform float uColorIntensity; in vec2 TexCoords; in vec2 GeomSize; out vec4 FragColor; float sample(vec2 coord, float r) { return step(r, texture2D(uShadowMap, coord).r); } float occluded() { float PI = 3.14; vec2 normalized = TexCoords.st * 2.0 - 1.0; float theta = atan(normalized.y, normalized.x); float r = length(normalized); float coord = (theta + PI) / (2.0 * PI); vec2 tc = vec2(coord, 0.0); float center = sample(tc, r); float sum = 0.0; float blur = (1.0 / GeomSize.x) * smoothstep(0.0, 1.0, r); sum += sample(vec2(tc.x - 4.0*blur, tc.y), r) * 0.05; sum += sample(vec2(tc.x - 3.0*blur, tc.y), r) * 0.09; sum += sample(vec2(tc.x - 2.0*blur, tc.y), r) * 0.12; sum += sample(vec2(tc.x - 1.0*blur, tc.y), r) * 0.15; sum += center * 0.16; sum += sample(vec2(tc.x + 1.0*blur, tc.y), r) * 0.15; sum += sample(vec2(tc.x + 2.0*blur, tc.y), r) * 0.12; sum += sample(vec2(tc.x + 3.0*blur, tc.y), r) * 0.09; sum += sample(vec2(tc.x + 4.0*blur, tc.y), r) * 0.05; return sum * smoothstep(1.0, 0.0, r); } float calcAttenuation(float distance) { float linearAtten = uLinearAtten * distance; float quadAtten = uQuadradicAtten * distance * distance; float attenuation = 1.0 / (uConstAtten + linearAtten + quadAtten); return attenuation; } vec3 calcFragPosition(void) { return vec3(TexCoords*GeomSize, 0.0); } vec3 calcLightPosition(void) { return vec3(GeomSize/2.0, 0.0); } float calcDistance(vec3 fragPos, vec3 lightPos) { return length(fragPos - lightPos); } vec3 calcLightDirection(vec3 fragPos, vec3 lightPos) { return normalize(lightPos - fragPos); } vec4 calcFinalLight(vec2 worldUV, vec3 lightDir, float attenuation) { float diffuseFactor = dot(normalize(texture2D(uNormalsTexture, worldUV).rgb), lightDir); vec4 diffuse = vec4(0.0); vec4 lightColor = uLightColor * uColorIntensity; if(diffuseFactor > 0.0) { diffuse = vec4(texture2D(uDiffuseTexture, worldUV.xy).rgb, 1.0); diffuse *= diffuseFactor; lightColor *= diffuseFactor; } else { discard; } vec4 final = (diffuse + lightColor); if(texture2D(uWorldNormals, worldUV).g > 0.0) { return final * attenuation; } else { return final * occluded(); } } void main(void) { vec3 fragPosition = calcFragPosition(); vec3 lightPosition = calcLightPosition(); float distance = calcDistance(fragPosition, lightPosition); float attenuation = calcAttenuation(distance); vec2 worldPos = gl_FragCoord.xy / vec2(1024, 768); vec3 lightDir = calcLightDirection(fragPosition, lightPosition); lightDir = (lightDir*0.5)+0.5; float atten = calcAttenuation(distance); vec4 emissive = texture2D(uEmissiveTexture, worldPos); FragColor = calcFinalLight(worldPos, lightDir, atten) + emissive; }

    Read the article

  • Getting FEATURE_LEVEL_9_3 to work in DX11

    - by Dominic
    Currently I'm going through some tutorials and learning DX11 on a DX10 machine (though I just ordered a new DX11 compatible computer) by means of setting the D3D_FEATURE_LEVEL_ setting to 10_0 and switching the vertex and pixel shader versions in D3DX11CompileFromFile to "vs_4_0" and "ps_4_0" respectively. This works fine as I'm not using any DX11-only features yet. I'd like to make it compatible with DX9.0c, which naively I thought I could do by changing the feature level setting to 9_3 or something and taking the vertex/pixel shader versions down to 3 or 2. However, no matter what I change the vertex/pixel shader versions to, it always fails when I try to call D3DX11CompileFromFile to compile the vertex/pixel shader files when I have D3D_FEATURE_LEVEL_9_3 enabled. Maybe this is due to the the vertex/pixel shader files themselves being incompatible for the lower vertex/pixel shader versions, but I'm not expert enough to say. My shader files are listed below: Vertex shader: cbuffer MatrixBuffer { matrix worldMatrix; matrix viewMatrix; matrix projectionMatrix; }; struct VertexInputType { float4 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; PixelInputType LightVertexShader(VertexInputType input) { PixelInputType output; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; // Calculate the position of the vertex against the world, view, and projection matrices. output.position = mul(input.position, worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); // Store the texture coordinates for the pixel shader. output.tex = input.tex; // Calculate the normal vector against the world matrix only. output.normal = mul(input.normal, (float3x3)worldMatrix); // Normalize the normal vector. output.normal = normalize(output.normal); return output; } Pixel Shader: Texture2D shaderTexture; SamplerState SampleType; cbuffer LightBuffer { float4 ambientColor; float4 diffuseColor; float3 lightDirection; float padding; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; float4 LightPixelShader(PixelInputType input) : SV_TARGET { float4 textureColor; float3 lightDir; float lightIntensity; float4 color; // Sample the pixel color from the texture using the sampler at this texture coordinate location. textureColor = shaderTexture.Sample(SampleType, input.tex); // Set the default output color to the ambient light value for all pixels. color = ambientColor; // Invert the light direction for calculations. lightDir = -lightDirection; // Calculate the amount of light on this pixel. lightIntensity = saturate(dot(input.normal, lightDir)); if(lightIntensity > 0.0f) { // Determine the final diffuse color based on the diffuse color and the amount of light intensity. color += (diffuseColor * lightIntensity); } // Saturate the final light color. color = saturate(color); // Multiply the texture pixel and the final diffuse color to get the final pixel color result. color = color * textureColor; return color; }

    Read the article

  • Ideas for time-keeping in a webbased RPG?

    - by ashy_32bit
    I'm assigned a task of doing the preliminary research stuff for a web-based MMO RPG. Now my buggiest problem here is "web based" vs "MMO RPG". I did some research about time keeping systems and I'm totally confused as how exactly something as real-time as an MMO-RPG can work on some pull-only (unidirectional) platform like HTTP. I know there is also a turn-based alternative to time keeping but can it work in an MMO setting ? EDIT: Take a battle for example, player A (human) wants to attack Player B (also human) in the open. How does it work when when player A issues the "attack" command on player B ? how do I inform player B that he is being attacked ? and then how exactly the battle goes on between the two in an HTTP based communication channel? To my knowledge this is impossible unless you resort to another technology (HTML is 1-way, that is you can just ask server and get response, server can't update you unless being asked to. this is very well-known and simply explained). So I though maybe I can somehow change the whole timekeeping model from real-time to a more non-real-time model (towards a turn based RPG for example) and somehow work around the whole problem of "interactivity". EDIT2: It is not that I don't wanna use any server side technologies. For sure it is not gonna work client-side-only even for the most trivial of the multi-player games, let alone an RPG. So sure there would be a (probably complex) server side component to it (the so called Game Engine I suppose). The problem is not the technology that implements the logic (game mechanics) bits but the communication technology and how it limits the game mechanics abilities (like how real-time or turn based it is gonna be). HTTP is a request-response protocol meaning you get served only if you ask for it (explicitly send a GET or POST request to the server). HTTP server can not inform you if anything of interest happens in the game world unless you refresh the page (as some suggested) or you use some bi-directional tech (totally different animals) like Flash, WebSock, HTML5 etc etc. So maybe the question is: Is it possible to implement a MMORPG using only HTML5/PHP and no periodic page refreshes? if so what would be rules to make it an MMO-RPG? Can't explain it any clearer. Sorry :D

    Read the article

  • Physics-based dynamic audio generation in games

    - by alexc
    I wonder if it is possible to generate audio dynamically without any (!) audio assets, using pure mathematics/physics and some input values like material properties and spatial distribution of content in scene space. What I have in mind is something like a scene, with concrete floor, wooden table and glass on it. Now let's assume force pushes the glass towards the edge of table and then the glass falls onto the floor and shatters. The near-realistic glass destruction itself would be possible using voxels and good physics engine, but what about the sound the glass makes while shattering? I believe there is a way to generate that sound, because physics of sound is fairly known these days, but how computationaly costy that would be? Consumer hardware or supercomputers? Do any of you know some good resources/videos of such an experiment?

    Read the article

  • Is a Single Texture Cube Map Possible?

    - by smoth190
    I'm currently developing a test project to explore OpenGL 3 texturing abilities. I have a simple cube, made of 8 vertices and 36 indices. I want each of the cubes faces to have a different texture, so I devised this texture: I made it obvious which sections I want visible (I hope...). In Direct3D, I once made a skybox, and I used a cubemap. However, I had to split it into 6 different textures. This is annoying and hard to manage, it would be nice to have just one texture. Is this even possible? I read somewhere that I could do this by duplicating vertices, is that a good idea? Someone else said I could do it in the shader, but that also baffles me...

    Read the article

  • Handling window resize with arbitrary aspect ratios

    - by DormoTheNord
    I'm currently making a 2D game using SFML. I want the aspect ratio to be maintained when the user resizes the window. I also want the game to work with any arbitrary aspect ratio (like any media player would). Here is the code I have so far: void os::GameEngine::setCameraViewport() { sf::FloatRect tempViewport; float viewAspectRatio = (float)aspectRatio.x / aspectRatio.y; float screenAspectRatio = (float)gameWindow.getSize().x / gameWindow.getSize().y; if (viewAspectRatio > screenAspectRatio) { // Viewport is wider than screen, fit on X } else if (viewAspectRatio < screenAspectRatio) { // Screen is wider than viewport, fit on Y } else // window aspect ratio matches view aspect ratio { tempViewport.height = 1; tempViewport.width = 1; tempViewport.left = 0; tempViewport.top = 0; } viewport = tempViewport; camera.setViewport(viewport); gameWindow.setView(camera); } The problem is I'm having trouble with the logic to determine the properties of the viewport.

    Read the article

  • SDL2 with OpenGL -- weird results, what's wrong?

    - by ber4444
    I'm porting an app to iOS, and therefore need to upgrade it to SDL2 from SDL1.2 (so far I'm testing it as an on OS X desktop app only). However, when running the code with SDL2, I'm getting weird results as shown on the second image below (the first image is how it looks with SDL, correctly). The single changeset that causes this is this one, do you see something obviously wrong there, or does SDL2 have some OpenGL nuances I'm unaware of? My SDL is based on changeset dd7e57847ea9 from HG (since then there is one "Allow specifying of OpenGL 3.2 Core Profile on Mac OS X" commit, not sure if that would help).

    Read the article

  • Constrained/penalized distance function

    - by sigma.z.1980
    Assume a character is located on a n by n grid and has to reach a certain entry on that grid. Its current position is (x1,y1). Also on the same grid is an enemy with coordinates (x2,y2). Each step algorithm randomly generates new candidate locations for the hero (if there are k candidates then there is a kx2 matrix of new potential locations. What I need is some distance objective function to compare the candidates. I'm currently using d1 - c * d2, where d1 is distance to the objective (measure in terms of number of pixels for each axis), d2 is distance to the enemy and c is some coefficient (this is very much like a set-up for Lagrangian). It's not working very well though. I'd be quite keen to learn how what constrained distance function are used for similar cases. Any suggestions are very much appreciated.

    Read the article

  • Would like some help in understanding rendering geometry vs textures

    - by Anon
    So I was just pondering whether it is more taxing on the GPU to render geometry or a texture. What I'm trying to see is whether there is a huge difference in rendering two scenes with the same setup: Scene 1: Example Object: A dirt road (nothing else) Geometry: Detailed road, with all the bumps, cracks and so forth done in the mesh Scene 2: Example Object: A dirt road (nothing else) Geometry: A simple mesh, in a form of a road, but in this case maps and textures are simulating cracks, bumps, etc... So of these two, which one is likely to tax the hardware more? Or is it not a like for like comparison? What would be the best way of doing something like this? Go heavy on the textures? Or have a blend of both?

    Read the article

  • projected textures not appear on the "back" of the mesh as well?

    - by user975135
    I want to create blood wounds on my character's bodies by using projected textures. I've watched some commentaries on games like Left 4 Dead and they say they use projected textures for the blood. But the way projected textures work is that if you project a texture on a rigged character, say his chest, it will also appear on his back. So what's the trick? How to get projected textures appear only on one "side" of the mesh? I use the Panda3D game engine, if that will help.

    Read the article

  • Rendering order in an Entity System

    - by Daedalus
    Say I use a basic ES approach, and also inside Systems I hold lists of all entities that Systems are required to process. How do I maintain this list of entities in desired rendering order, i.e. for a dumb 2D RenderingSystem? I saw this discussion, and what they suggest is to do something like Z ordering - what I would probably do is just to store a "layer" int in DrawableComponent and then, inside RenderingSystem, just sort entities by mentioned "layer" whenever the entity list for RenderingSystem changes. They also say we could just delete and recreate the entity whenever we want it on the top, but it seems too inflexible to me. How is this problem usually solved?

    Read the article

  • Turn-based Client-Server Card Game - Unicast (TCP) or Multicast (UDP)

    - by LDM91
    I am currently planning to make a card game project where the clients will communicate with the server in a turn-based and synchronous manner using messages sent over sockets. The problem I have is how to handle the following scenario: (Client takes it turn and sends its action to server) Client sends a message telling the server its move for the turn (e.g. plays the card 5 from its hand which needs to placed onto the table) Server receives messages and updates game state (server will hold all game state). Server iterates through a list of connected clients and sends a message to tell of them change in state Clients all refresh to display the state This is all based on using TCP, and looking at it now it seems a bit like the Observer pattern. The reason this seems to be an issue to me is this message doesn't seem to be point-to-point like the others as I want to send it to all the clients, and doesn't seem very efficient sending the same message in that way. I was thinking about using multicasting with UDP as then I could send the message to all the clients, however wouldn't this mean that the clients would in theory be able to message each other? There is of course the synchronous aspect as well, though this could be put on top of the UDP I guess. Basically, I would like to know what would be good practice as this project is really all about learning, and even though it won't be big enough to encounter performance issues from this I would like to consider them anyway. However, please note I am not interested in using message oriented middleware as a solution (I have experience with using MOM and I'm interested in considering other options excluding MOM if TCP sockets is a bad idea!).

    Read the article

  • Circle to Circle collision, checking each circle against all others

    - by user14861
    I'm currently coding a little circle to circle collision demo but I've got a little stuck. I think I currently have the code to detect collision but I'm not sure how to loop through my list of circles and check them off against one another. Collision check code: public static Vector2 GetIntersectionDepth(Circle a, Circle b) { float xValue = a.Center.X - b.Center.X; float yValue = a.Center.Y - b.Center.Y; Vector2 depth = Vector2.Zero; float distance = Vector2.Distance(a.Center, b.Center); if (a.Radius + b.Radius > distance) { float result = (a.Radius + b.Radius) - distance; depth.X = (float)Math.Cos(result); depth.Y = (float)Math.Sin(result); } return depth; } Loop through code: Vector2 depth = Vector2.Zero; for (int i = 0; i < bounds.Count; i++) for (int j = i+1; j < bounds.Count; j++) { depth = CircleToCircleIntersection.GetIntersectionDepth(bounds[i], bounds[j]); } Clearly I'm a complete newbie, wondering if anyone can give any suggestions or point out my errors, thanks in advance. :)

    Read the article

  • Why can't a blendShader sample anything but the current coordinate of the background image?

    - by Triynko
    In Flash, you can set a DisplayObject's blendShader property to a pixel shader (flash.shaders.Shader class). The mechanism is nice, because Flash automatically provides your Shader with two input images, including the background surface and the foreground display object's bitmap. The problem is that at runtime, the shader doesn't allow you to sample the background anywhere but under the current output coordinate. If you try to sample other coordinates, it just returns the color of the current coordinate instead, ignoring the coordinates you specified. This seems to occur only at runtime, because it works properly in the Pixel Bender toolkit. This limitation makes it impossible to simulate, for example, the Aero Glass effect in Windows Vista/7, because you cannot sample the background properly for blurring. I must mention that it is possible to create the effect in Flash through manual composition techniques, but it's hard to determine when it actually needs updated, because Flash does not provide information about when a particular area of the screen or a particular display object needs re-rendered. For example, you may have a fixed glass surface with objects moving underneath it that don't dispatch events when they move. The only alternative is to re-render the glass bar every frame, which is inefficient, which is why I am trying to do it through a blendShader so Flash determines when it needs rendered automatically. Is there a technical reason for this limitation, or is it an oversight of some sort? Does anyone know of a workaround, or a way I could provide my manual composition implementation with information about when it needs re-rendered? The limitation is mentioned with no explanation in the last note in this page: http://help.adobe.com/en_US/as3/dev/WSB19E965E-CCD2-4174-8077-8E5D0141A4A8.html It says: "Note: When a Pixel Bender shader program is run as a blend in Flash Player or AIR, the sampling and outCoord() functions behave differently than in other contexts.In a blend, a sampling function will always return the current pixel being evaluated by the shader. You cannot, for example, use add an offset to outCoord() in order to sample a neighboring pixel. Likewise, if you use the outCoord() function outside a sampling function, its coordinates always evaluate to 0. You cannot, for example, use the position of a pixel to influence how the blended images are combined."

    Read the article

  • How to work with scenes in a 2D game

    - by Anearion
    I'm a java/android programmer, but I don't have any experience in game programming, I'm already reading proper books, like "Pro Android Games", but my concerns are more about the ideas behind game programming than the techniques themselves. I'm working on a 2D game, something like Cluedo to let you understand the genre. I would like to know how should I act with the "scenes", for example, a room with a desk, TV, windows and a lamp. I need to make some items tappable and others not. Is it common to use one image (invisible to the user) with every different item a different color, then call the getColor() method on the image? Or use one image as background, and separate images for all the items? If the latter, how can I set the positioning? and should I use imageView or imageButton? I'm sorry if those are really low quality questions, but as "outsider" ( I'm 23 and still finishing my university ) it's pretty hard learn alone.

    Read the article

  • Character jump animation is not working when i hit the space bar

    - by muzzy
    i am having an issue with my game in XNA. My jump sprite sheet for my character does not trigger when i hit the space bar. I cant seem to find the problem. Please help me. I am also put the code below to make things easier. namespace WindowsGame4 { public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; // start of new code Texture2D playerWalk; // sprite sheet of walk cycle (14 frames) Texture2D idle; // idle animation Texture2D jump; // jump animation Vector2 playerPos; // to hold x and y position info for the player Point frameDimensions; // to hold width and height values for the frames int presentFrame; // to record which frame we are on at any given time int noOfFrames; // to hold the total number of frames in the spritesheet int elapsedTime; // to know how long each frame has been shown int frameDuration; // to hold info about how long each frame should be shown SpriteEffects flipDirection; // SpriteEffects object int speed; //rate of movement int upMovement; int downMovement; int rightMovement; int leftMovement; int jumpApex; string state; //this is going to be "idle","walking" or "jumping". KeyboardState previousKeyboardState; Vector2 originalPlayerPos; Vector2 movementDirection; Vector2 movementSpeed; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { // textures will be defined in the LoadContent() method playerPos = new Vector2(0, 200); // starting position for the player is at the left of the screen, and a Y position of 200 frameDimensions = new Point(55, 65); // each frame in the idle sprite sheet is 55 wide by 65 high presentFrame = 0; // start at frame 0 noOfFrames = 5; // there are 5 frames in the idle cycle elapsedTime = 0; // set elapsed time to start at 0 frameDuration = 80; // 80 milliseconds is how long each frame will show for (the higher the number, the slower the animation) flipDirection = SpriteEffects.None; // set the value of flipDirection to none speed = 200; upMovement = -2; downMovement = 2; rightMovement = 1; leftMovement = -1; jumpApex = 100; state = "idle"; previousKeyboardState = Keyboard.GetState(); originalPlayerPos = Vector2.Zero; movementDirection = Vector2.Zero; movementSpeed = Vector2.Zero; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); playerWalk = Content.Load<Texture2D>("sprites/walkSmall"); // load the walk cycle spritesheet idle = Content.Load<Texture2D>("sprites/idleCycle"); // load the idle cycle sprite sheet jump = Content.Load<Texture2D>("sprites/jump"); // load the jump cycle sprite sheet } protected override void UnloadContent() // we're not using this method at the moment { } protected override void Update(GameTime gameTime) // Update method - used it to call a number of other methods { if (Keyboard.GetState().IsKeyDown(Keys.Escape)) { this.Exit(); // Exit the game if the Escape key is pressed } KeyboardState presentKeyboardState = Keyboard.GetState(); UpdateMovement(presentKeyboardState, gameTime); UpdateIdle(presentKeyboardState, gameTime); UpdateJump(presentKeyboardState); UpdateAnimation(gameTime); playerPos += movementDirection * movementSpeed * (float)gameTime.ElapsedGameTime.TotalSeconds; previousKeyboardState = presentKeyboardState; base.Update(gameTime); } private void UpdateAnimation(GameTime gameTime) { elapsedTime += gameTime.ElapsedGameTime.Milliseconds; if (elapsedTime > frameDuration) { elapsedTime -= frameDuration; elapsedTime = elapsedTime - frameDuration; presentFrame++; if (presentFrame > noOfFrames) if (state != "jumping") { presentFrame = 0; } else { presentFrame = 8; } } } protected void UpdateMovement(KeyboardState presentKeyboardState, GameTime gameTime) { if (state == "idle") { movementSpeed = Vector2.Zero; movementDirection = Vector2.Zero; if (presentKeyboardState.IsKeyDown(Keys.Left)) { state = "walking"; movementSpeed.X = speed; movementDirection.X = leftMovement; flipDirection = SpriteEffects.FlipHorizontally; } if (presentKeyboardState.IsKeyDown(Keys.Right)) { state = "walking"; movementSpeed.X = speed; movementDirection.X = rightMovement; flipDirection = SpriteEffects.None; } } } private void UpdateIdle(KeyboardState presentKeyboardState, GameTime gameTime) { if ((presentKeyboardState.IsKeyUp(Keys.Left) && previousKeyboardState.IsKeyDown(Keys.Left) || presentKeyboardState.IsKeyUp(Keys.Right) && previousKeyboardState.IsKeyDown(Keys.Right) && state != "jumping")) { state = "idle"; } } private void UpdateJump(KeyboardState presentKeyboardState) { if (state == "walking" || state == "idle") { if (presentKeyboardState.IsKeyDown(Keys.Space) && !presentKeyboardState.IsKeyDown(Keys.Space)) { presentFrame = 1; DoJump(); } } if (state == "jumping") { if (originalPlayerPos.Y - playerPos.Y > jumpApex) { movementDirection.Y = downMovement; } if (playerPos.Y > originalPlayerPos.Y) { playerPos.Y = originalPlayerPos.Y; state = "idle"; movementDirection = Vector2.Zero; } } } private void DoJump() { if (state != "jumping") { state = "jumping"; originalPlayerPos = playerPos; movementDirection.Y = upMovement; movementSpeed = new Vector2(speed, speed); } } protected override void Draw(GameTime gameTime) // Draw method { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); // begin the spritebatch if (state == "walking") { noOfFrames = 14; frameDimensions = new Point(55, 65); Vector2 playerWalkPos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(playerWalk, playerWalkPos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } if (state == "idle") { noOfFrames = 5; frameDimensions = new Point(55, 65); Vector2 idlePos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(idle, idlePos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } if (state == "jumping") { noOfFrames = 9; frameDimensions = new Point(55, 92); Vector2 jumpPos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(jump, jumpPos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } spriteBatch.End(); // end the spritebatch commands base.Draw(gameTime); } } }

    Read the article

< Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >