Search Results

Search found 1425 results on 57 pages for 'cisco catalyst'.

Page 46/57 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • VMware vSwitches and Dell PowerConnect BPDU guard

    - by dunxd
    I am using two Dell PowerConnect 6248 switches to connect a VMware host vSwitch. A discussion of config of Cisco switches for use with VMware advises to set physical ports connected to vSwitch with bpduguard and portfast. However, Dell switches don't have the bpduguard setting for individual ports. I can switch it off globally for all portfast ports, but I don't think I want to do that. Should I: Disable STP on the vSwitch connected ports? Leave STP on and enable portfast on the ports, and forget about bpduguard? Disable bpduguard on all portfast ports via global config Do something else? See also: VMware vSwitches and spanning tree

    Read the article

  • PXE in an 802.1X environment

    - by newmanth
    My organization is about to implement 802.1X on our enterprise, but we currently use PXE-based OS deployment sequences in SCCM. I'm looking for a way to continue using PXE in an 802.1X environment. Our infrastructure uses Cisco network gear running at 12.2 (or newer). We are an all Windows network and all clients support 802.1X. All new workstations have Intel AMT available (but not factory configured). In a worst case scenario, we'll use a guest vlan for OSD, but I'd rather have the OSD occur in an authenticated session. I've seen white papers that describe using AMT to act as a supplicant for PXE boot, but can't find any implementation details...

    Read the article

  • How much should a Systems Administrator be making?

    - by Curtis
    Hello, I'm a Sys Admin for a small (but successful and growing) company (~60 employees). I've got roughly 5-6 years of actual sys admin experience, plus another 5+ years of lower level work in the industry. I'm responsible for most everything above a helpdesk level in the company (server[windows]/network[cisco]/firewall/SAN[emc] setup/configuration/maintenance/troubleshooting), lead many projects, analyze system data -- I'm sure you've heard it all before...I have a bunch of certs, most are just "nice to have", but the ones that actually apply to my role are CCNA, MSCE, VCP (VMware). If things go wrong, I'm first in line to resolve the issue. I'm not management (no one reports to me). I've seen many of these sorts of questions online before, and I know the typical response is "too many variables, depends on location, industry type" etc etc. I'm just wondering (ballpark) what I should be looking for. I've tried to give as much detail as I can, but if I'm missing something, I'd be glad to post it. Thanks anyone.

    Read the article

  • Setting up multiple wireless access points on same network

    - by SqlRyan
    I'd like to add wireless to my network, and I need multiple access points to cover the whole area. I'd like to set them up so that there's only one "wireless network" that the clients see, and it switches them as seamlessly as possible between access points as they wander around (if that's not possible, then at least have it so that they don't need to set up the security by hand on each one the first time, if possible). I've searched online, and there are quite a few sets of mixed instructions (same vs different SSID, frequency, does the security need to match exactly, etc.). Can somebody who has some experience doing this please let me know what they did? I imagine it's pretty simple, but there seems to be no clear cut "yes, you can do this" online, even though I know you can. I have a mid-size LAN with about 20 workstations and two Domain Controllers on it. Also, I'll be doing this with consumer wireless components, if it makes a difference, not enterprise-level components (ie. Linksys rather than Cisco).

    Read the article

  • Connecting Small business network to Azure Site to Site VPN

    - by MarkKGreenway
    Would like to have connectivity between azure virtual machines and on LAN users. My current network has a Cisco ISA550 connected to the WAN (one Ethernet cable into the office the fiber transceiver is on a different floor)and any public servers can be one-to one NAT-ed to have a public and private IP. What is the best way to get a reliable connection. Between end users and the cloud? I want to know the preferred on site endpoint. Do the azure vm's have to have a local ip in the LAN subnet? (Right now 10.10.0.0/20 or 255.255.240.0 to give room if this is the case). If in purchased an asa550 would I put it behind or in front of the isa550. Would it be ahead or peer with the users switches? What is the best way to get a reliable connection. Between end users and the cloud servers?

    Read the article

  • Check_webinject plugin will not connect to https site using

    - by uSlackr
    We're using Nagios to monitor some of our web sites. We have a script that uses the older plugin that we are trying to switch to using webinject.pl from cpan. When the script runs, it generates this error: LWP::Protocol::https::Socket: SSL connect attempt failed with unknown error error:1407741A:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert decode error at /usr/local/share/perl5/LWP/Protocol/http.pm line 51. It appears the web site does not support TLSv1 for https. If it matters, the site is a Cisco WebVPN. I've pointed the same script at a different site that does support TLSv1 and it seems to work fine. My web search is coming up empty. Successful connect: <case id="1" description1="Metro Home Page" description2="Metro, login test" method="get" url="https://metro.myco.com/index.php" verifypositive="restricted" logrequest="yes" logresponse="yes" sleep="1" / Failing connect: <case id="2" description1="WebVPN Home Page" description2="webvpn.myco.com login test" method="get" url="https://webvpn.myco.com/webvpn.html" verifypositive="Authorized" logrequest="yes" logresponse="yes" sleep="1" /

    Read the article

  • Cant logon to domain over site-to-site vpn

    - by 3molo
    Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

    Read the article

  • Two identical fiber optic broadband lines working as one

    - by Katafalkas
    I have been trying to find an answer to this, but all I can find is hobbyists trying to connect their Linksys devices to get some magic out of them. I am looking for a way I could combine two 100Mbit fiber optic lines into a single connection for our office. I assume it involves some Cisco learning or something similar. Do I need to configure some big router to load-balance the NATing in some way? I assume that many of you have done something similar and hope someone could share their knowledge or at least provide me some tips on how to do this.

    Read the article

  • IPSec tunnel between FortiGate and iPhone / iOS - Works except for DNS / Wins

    - by user57988
    I have configured my Fortigate with a new VPN IPSec tunnel to allow the iOS Cisco client to connect. That works fine. I can RDP to my servers, browse to my servers via IP address, etc. But, the iPhone does not resolve my internal IP addresses. I have added the DNS servers that serve addresses for my internal users, as well as the WINS servers, but the iPhone acts like it doesn't see them at all. config vpn ipsec phase1-interface edit "iPhone_VPN" set type dynamic set interface "wan1" set dhgrp 2 set proposal 3des-sha1 3des-md5 set xauthtype auto set mode-cfg enable set authusrgrp "iPhone_VPN_Users" set ipv4-start-ip 10.10.99.100 set ipv4-end-ip 10.10.99.199 set ipv4-netmask 255.255.0.0 set ipv4-dns-server1 10.10.2.1 set ipv4-dns-server2 10.22.1.80 set ipv4-wins-server1 10.10.2.1 set ipv4-wins-server2 10.22.1.80 set ipv4-split-include "Dialup_VPN_Networks" set psksecret ENC xxxxx next end For whatever reason, as far as I can tell, the iPhone does not 'see' the DNS or WINS entries. I don't know how to check it...

    Read the article

  • Linux router and firewall with IP accounting

    - by Andrew
    I'm working on a project to replace my organisation's aging Slackware gateway/router/firewall machine in our colo rack. Previously we used rc.firewall but we are now looking for something more modern and easily configurable. The requirements are: Act as a gateway router & firewall Port forwarding to a Terminal Server in the colo IP/traffic accounting, preferably accessible via SNMP (already using cacti for other servers) Possibility of acting as a PPTP server & routing these connections Is not an out-of-the-box Cisco product (don't have the finances or support to maintain it) I'd prefer to use Ubuntu or some other Debian-based distro but something that integrates everything we're looking for is certainly an option if it offers all the desired features and is easy to configure. Is there a simple set of packages that will provide me with the Firewall & Accounting features, or am I best served with a custom-built distro / other solution?

    Read the article

  • internal DNS server limiting the speed as 55kb/sec ?

    - by kartook
    Hi all , Thanks in advance to everyone . Here is my Question . 1 .We have LAN internal DNS server ( 192.168.205.200 ) 2. DNS server Running on my ADDITIONAL DOMAIN CONTROLLER 3. Tested with Nslookup IPADDRESS and hostname resolving without any error . 4 .DHCP server Running on 3750 Switch ( Checked with CISCO Confirmed the configuration ) .DNS name server pointed to 192.168.205.200 . ISSUE : 1.Host getting ipaddress and DNS from DHCP server .Maximum file transfer Bandwidth 55KB/sec . 2. Assigned Static DNS on Host as ISP DNSServer Address, host getting full bandwidth whihc is 1mb/sec Thanks Kartook

    Read the article

  • How do I use WAV files as a voicemail greeting in Exchange UM?

    - by Doug Luxem
    We are in the process of ditching Cisco Unity for Exchange 2007 Unified Messaging; however, I just came to realization that Exchange doesn't seem to provide a way to upload a WAV file to be used as a voicemail greeting. This could be a problem, since we have several mailboxes that use professionally recorded greetings. I found this article which shows how to access the data through MAPI, but it does not provide a way to upload new files. Note, this is not for the auto attendants, but for actual voicemail greetings.

    Read the article

  • 2 HP Procurve 4000M switches and Comcast SMC Gateway

    - by Cole Tierney
    We've got 2 HP Procurve 4000M switches joined by a trunk. Switch 1 is connected to a Cisco 2600 router which is connected to a T1. Internet traffic for hosts on switch 2 must pass through the trunk to switch 1. We're now switching to Comcast who's given us 4 port SMC router. I would like to connect each switch to the comcast router to reduce traffic on the trunk, but I don't want to create a loop. The switches support spanning tree protocol, but I don't know how this would work with the comcast router. Would a triangle network like this work? Thanks for any tips.

    Read the article

  • Is anyone else using OpenBSD as a router in the enterprise? What hardware are you running it on?

    - by Kamil Kisiel
    We have an OpenBSD router at each of our locations, currently running on generic "homebrew" PC hardware in a 4U server case. Due to reliability concerns and space considerations we're looking at upgrading them to some proper server-grade hardware with support etc. These boxes serve as the routers, gateways, and firewalls at each site. At this point we're quite familiar with OpenBSD and Pf, so hesitant at moving away from the system to something else such as dedicated Cisco hardware. I'm currently thinking of moving the systems to some HP DL-series 1U machines (model yet to be determined). I'm curious to hear if other people use a setup like this in their business, or have migrated to or away from one.

    Read the article

  • Best security practice for small networks - wifi, lan,

    - by Grimlockz
    We regularly setup small networks for clients in different locations to allow them to work on different products now the question what should be the best security practice. Currently we have a wifi enabled with WPA2 and most laptops connect to this but some will connect to a cabled switch connecting to the router. We are thinking on what we should do to increase the security on our small networks - We do have have security on the laptops so you can share directly to the other persons drive by a simple Windows user account. Some suggestions are: We get a LAN switch with ACL control and mac filtering for the hard wired connections? We get acl working on the wifi via a good Cisco router? ipSec policies on all machines? IP filtering and fixed IPs? I suppose people are worried that anyone can plug into the switches and get the access to the network . Summary: Maintain a level of decent security that can be replicated easily to every setup that we do for clients

    Read the article

  • Backing up Initial and Running configurations for Nortel Baystack 325-24G

    - by i.h4d35
    I recently came across a Nortel Baystack 325-24G switch. This is the first time I've come across a Nortel device of any sort, so I am a little intimidated. My problem is that I have been trying to get the startup and running configurations via both the CLI and the Menus but its become quite apparent that it isn't like the Cisco Switches/Routers. I've searched online but have only found Configuration Guides by Avaya. Also I'd like to know - is there a way to take backups regularly (something like tftp)? Pardon me but I'm a n00b when it comes to routers and switches. Thanks in advance.. EDIT: Still havent found a way to get the running config via the CLI

    Read the article

  • Ubuntu web site hosting & free ,tk domain

    - by user5819
    Hello, I am sort of new to web hosting so sorry if I ask bad questions. I have a pc that runs ubuntu I instaled apache and now I host a web site, but I need a domain name so I found out .tk is free. The site works when typing 192.168.1.x in the browser(x= a number) but in dot.tk when I register in ip it whats one that look like 79.117.x.x so thats where I get stuck, I think I managed to make my ip address static but it still looks like 192.168.1.x and I can't put that in because it says: " This IP address is not valid". Why must it have the ip address that looks like 79.117.x.x and won't work with the internal static one and how can I do to host my site with a .tk domain name ? PS: I'm using a cisco router that's connected with computer via a cable.

    Read the article

  • How to change aging AD password while connected over VPN from Mac

    - by Franek Kuciapa
    I am connecting to the office from mac via VPN, Cisco AnyConnect Secure Mobility Client. I do not know what to do when my AD password on the firm side will age and approach expiration to ensure that my Mac and VPN continue to work afterwards. Is the proper thing to do in this case to connect via VPN and then change the password on Mac via System Preferences, Users & Groups? Will this update the AD on the server side? Will it sync the PointSec as well that is running on the Mac? Or is a better procedure to RDP to a Windows box while connected over VPN and change the password there hoping the Mac will somehow sync up ?? Running Mountain Lion on the Mac.

    Read the article

  • ADFS 2.0 and WebEx

    - by DavisTasar
    We have a brand new deployment going on, where our University has purchased WebEx MeetingPlace. We have the Cisco CallManager component working, but the integration with Single Sign On with ADFS 2.0 has been nothing short of torture. The biggest problem I'm working with is that we use Split-Brain DNS, and our internal domain name versus external domain name is different. Trying to determine what credentials are getting passed back and forth, certificate errors for using the self-signed certificate, etc. Does anyone have any experience with this, or something similar? Do you have any tips, or watch-out-for-this, etc.? I've not worked with a Federated Authentication system before, and this scenario is very black-box-esque. Sorry, I'm also partially ranting as I'm frustrated.

    Read the article

  • email to sip voicemail

    - by alfredwesterveld
    Hi all, I don't know if this is the correct place to answer this question, but here it goes. I have been googling for a cheap email to sip voicemail service. That is because I have got a Linksys/Cisco SPA-941 phone which has a led which will light up when a new message comes in inbox(somebody calls me). So what I want is the following. I want the e-mail(title only is enough) recorded(By computer voice) and sent to my phone which I can playback when the led lights up. Like I said above I was unsuccessful googling for a service like this and I hope somebody knows if this service exists. Many thanks, Alfred

    Read the article

  • Advantages / disadvantages of having DynDNS access on a computer vs the router

    - by Margaret
    I have a shiny new toy, a Cisco Wireless-N Gigabit Security Router with VPN (WRVS4400N). While looking through the instruction manual, I discovered that it had support for DynDNS built-in. We've currently got the DynDNS client running on one of the servers (that people SSH to, as documented in this question); but the reason for the router update is to move away from SSH to VPN. To that end, is there any difference in behaviour/functionality/maintainability to run it off the computer, as opposed to the router? Thus far, DynDNS has more or less a set-and-forget setup, but since the feature was there, I wanted to know if it was a better location for the process...

    Read the article

  • "custom" routers for VPN - useful or waste of money?

    - by Andrew Heath
    I use VPN in China and my current service contract expires soon so I was checking what sort of plans are out there now. I found that Witopia offers a "Cloak Box", what appears to be a Linksys wireless router with allegedly hacked/custom firmware to support VPN. Aside from allowing multiple computers to share one VPN connection, is there anything else at work here to justify that price when most new routers are $100 or less these days? Or is this something targeted towards the cd-rom cupholder crowd? And yes, I've contacted them, but haven't heard back yet... EDIT I've heard back from the company - here are the details if anyone else is interested: the router is a Linksys WRT54GL running TomatoVPN custom firmware the hardware waranty is one (1) year, from Linksys/Cisco the VPN is hard-set, so any device connected to the router MUST use the VPN (Witopia blocks torrents) I've decided it's not for me, but hopefully this information will prove useful to others.

    Read the article

  • vSphere ESX 5.5 hosts cannot connect to NFS Server

    - by Gerald
    Summary: My problem is I cannot use the QNAP NFS Server as an NFS datastore from my ESX hosts despite the hosts being able to ping it. I'm utilising a vDS with LACP uplinks for all my network traffic (including NFS) and a subnet for each vmkernel adapter. Setup: I'm evaluating vSphere and I've got two vSphere ESX 5.5 hosts (node1 and node2) and each one has 4x NICs. I've teamed them all up using LACP/802.3ad with my switch and then created a distributed switch between the two hosts with each host's LAG as the uplink. All my networking is going through the distributed switch, ideally, I want to take advantage of DRS and the redundancy. I have a domain controller VM ("Central") and vCenter VM ("vCenter") running on node1 (using node1's local datastore) with both hosts attached to the vCenter instance. Both hosts are in a vCenter datacenter and a cluster with HA and DRS currently disabled. I have a QNAP TS-669 Pro (Version 4.0.3) (TS-x69 series is on VMware Storage HCL) which I want to use as the NFS server for my NFS datastore, it has 2x NICs teamed together using 802.3ad with my switch. vmkernel.log: The error from the host's vmkernel.log is not very useful: NFS: 157: Command: (mount) Server: (10.1.2.100) IP: (10.1.2.100) Path: (/VM) Label (datastoreNAS) Options: (None) cpu9:67402)StorageApdHandler: 698: APD Handle 509bc29f-13556457 Created with lock[StorageApd0x411121] cpu10:67402)StorageApdHandler: 745: Freeing APD Handle [509bc29f-13556457] cpu10:67402)StorageApdHandler: 808: APD Handle freed! cpu10:67402)NFS: 168: NFS mount 10.1.2.100:/VM failed: Unable to connect to NFS server. Network Setup: Here is my distributed switch setup (JPG). Here are my networks. 10.1.1.0/24 VM Management (VLAN 11) 10.1.2.0/24 Storage Network (NFS, VLAN 12) 10.1.3.0/24 VM vMotion (VLAN 13) 10.1.4.0/24 VM Fault Tolerance (VLAN 14) 10.2.0.0/24 VM's Network (VLAN 20) vSphere addresses 10.1.1.1 node1 Management 10.1.1.2 node2 Management 10.1.2.1 node1 vmkernel (For NFS) 10.1.2.2 node2 vmkernel (For NFS) etc. Other addresses 10.1.2.100 QNAP TS-669 (NFS Server) 10.2.0.1 Domain Controller (VM on node1) 10.2.0.2 vCenter (VM on node1) I'm using a Cisco SRW2024P Layer-2 switch (Jumboframes enabled) with the following setup: LACP LAG1 for node1 (Ports 1 through 4) setup as VLAN trunk for VLANs 11-14,20 LACP LAG2 for my router (Ports 5 through 8) setup as VLAN trunk for VLANs 11-14,20 LACP LAG3 for node2 (Ports 9 through 12) setup as VLAN trunk for VLANs 11-14,20 LACP LAG4 for the QNAP (Ports 23 and 24) setup to accept untagged traffic into VLAN 12 Each subnet is routable to another, although, connections to the NFS server from vmk1 shouldn't need it. All other traffic (vSphere Web Client, RDP etc.) goes through this setup fine. I tested the QNAP NFS server beforehand using ESX host VMs atop of a VMware Workstation setup with a dedicated physical NIC and it had no problems. The ACL on the NFS Server share is permissive and allows all subnet ranges full access to the share. I can ping the QNAP from node1 vmk1, the adapter that should be used to NFS: ~ # vmkping -I vmk1 10.1.2.100 PING 10.1.2.100 (10.1.2.100): 56 data bytes 64 bytes from 10.1.2.100: icmp_seq=0 ttl=64 time=0.371 ms 64 bytes from 10.1.2.100: icmp_seq=1 ttl=64 time=0.161 ms 64 bytes from 10.1.2.100: icmp_seq=2 ttl=64 time=0.241 ms Netcat does not throw an error: ~ # nc -z 10.1.2.100 2049 Connection to 10.1.2.100 2049 port [tcp/nfs] succeeded! The routing table of node1: ~ # esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 10.1.1.0 255.255.255.0 Local Subnet vmk0 10.1.2.0 255.255.255.0 Local Subnet vmk1 10.1.3.0 255.255.255.0 Local Subnet vmk2 10.1.4.0 255.255.255.0 Local Subnet vmk3 default 0.0.0.0 10.1.1.254 vmk0 VM Kernel NIC info ~ # esxcfg-vmknic -l Interface Port Group/DVPort IP Family IP Address Netmask Broadcast MAC Address MTU TSO MSS Enabled Type vmk0 133 IPv4 10.1.1.1 255.255.255.0 10.1.1.255 00:50:56:66:8e:5f 1500 65535 true STATIC vmk0 133 IPv6 fe80::250:56ff:fe66:8e5f 64 00:50:56:66:8e:5f 1500 65535 true STATIC, PREFERRED vmk1 164 IPv4 10.1.2.1 255.255.255.0 10.1.2.255 00:50:56:68:f5:1f 1500 65535 true STATIC vmk1 164 IPv6 fe80::250:56ff:fe68:f51f 64 00:50:56:68:f5:1f 1500 65535 true STATIC, PREFERRED vmk2 196 IPv4 10.1.3.1 255.255.255.0 10.1.3.255 00:50:56:66:18:95 1500 65535 true STATIC vmk2 196 IPv6 fe80::250:56ff:fe66:1895 64 00:50:56:66:18:95 1500 65535 true STATIC, PREFERRED vmk3 228 IPv4 10.1.4.1 255.255.255.0 10.1.4.255 00:50:56:72:e6:ca 1500 65535 true STATIC vmk3 228 IPv6 fe80::250:56ff:fe72:e6ca 64 00:50:56:72:e6:ca 1500 65535 true STATIC, PREFERRED Things I've tried/checked: I'm not using DNS names to connect to the NFS server. Checked MTU. Set to 9000 for vmk1, dvSwitch and Cisco switch and QNAP. Moved QNAP onto VLAN 11 (VM Management, vmk0) and gave it an appropriate address, still had same issue. Changed back afterwards of course. Tried initiating the connection of NAS datastore from vSphere Client (Connected to vCenter or directly to host), vSphere Web Client and the host's ESX Shell. All resulted in the same problem. Tried a path name of "VM", "/VM" and "/share/VM" despite not even having a connection to server. I plugged in a linux system (10.1.2.123) into a switch port configured for VLAN 12 and tried mounting the NFS share 10.1.2.100:/VM, it worked successfully and I had read-write access to it I tried disabling the firewall on the ESX host esxcli network firewall set --enabled false I'm out of ideas on what to try next. The things I'm doing differently from my VMware Workstation setup is the use of LACP with a physical switch and a virtual distributed switch between the two hosts. I'm guessing the vDS is probably the source of my troubles but I don't know how to fix this problem without eliminating it.

    Read the article

  • Anyone love/hate the PowerConnect line of switches from Dell?

    - by Rob Bergin
    I am looking at replacing some unmanaged 16 port store bought GB switches and wanted to go with Cisco but it may be cost prohibitive. Instead I am looking at ProCurve or Dell's PowerConnect line up. I am looking for SNMP, Management, VLANs, and SFLOW would icing on the switch cupcake. I would get the 6224 or the 6248 and then maybe add the RPS-600 to it for redundant power. I think the RPS-600 supports multiple switches. Rackspace is also a little challenge so I am trying to do it with as little Rack Units as possible. Ideally I would go with two 6224's or a single 6248 and then do two VLANs. Thanks for any feedback. Rob

    Read the article

  • solaris + dladm + what is unknown state and how to bring it to up?

    - by yael
    I installed Solaris 10 on my netra machine from dladm show-dev I can see which interface are down or up all interfaces are connected to the Cisco switch , and all leds are light's on all LAN cards but I not understand why all interfaces except e1000g0 are in unknown ? Please advice how to bring the unknown interfaces to up ? # dladm show-dev e1000g0 link: up speed: 1000 Mbps duplex: full e1000g1 link: unknown speed: 0 Mbps duplex: unknown e1000g2 link: unknown speed: 0 Mbps duplex: unknown e1000g3 link: unknown speed: 0 Mbps duplex: unknown nxge0 link: unknown speed: 0 Mbps duplex: unknown nxge1 link: unknown speed: 0 Mbps duplex: unknown nxge2 link: unknown speed: 0 Mbps duplex: unknown nxge3 link: unknown speed: 0 Mbps duplex: unknown

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >