Search Results

Search found 6605 results on 265 pages for 'complex networks'.

Page 46/265 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Static Route Qestion

  - by mrlayance

  I have a Wan simulator between 2 networks. I can ping both networks from the wan simulator, but I can not ping from one network to the other. testr01 Fa0/0 10.0.0.1/24 FA0/1 192.168.0.1/30 | | Wan Sim 2 nics Eth0 192.168.0.2/30 | Eth1 192.168.1.2/30 | | testr02 Fa0/1 192.168.1.1/30 Fa0/0 10.1.0.2/24 I can not figure out what type of routes I need. On the route? On the Server? I guess all 10. traffic to the Fa0/0 ports? Thanks

  Read the article

• FreeBSD high load loopback interface

  - by user1740915

  I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

  Read the article

• Ad-hoc connection between iPhone and Macbook Pro

  - by Phil Nash

  I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

  Read the article

• Windows 7 Wireless Network Adapter Stopped Working

  - by Andrew B Schultz

  I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

  Read the article

• keepalived questions (requirements, abilities, limitations)

  - by Poni

  1) What are keepalived's (physical/network) requirements? Does the two (or more) keepalived' nodes need to be connected to the same switch? (something related to broadcasting maybe). 2) Can keepalived nodes run on different networks, "internet" networks? 3) Is keepalived depend on the router? (as far as I understand, the virtual IP should point to the real router/switch that connects both nodes). 4) Is keepalived "service-independent"? - What is keepalived's involvement domain? IPs only? Or is it service/protocol oriented? - Does it deal ONLY with IP, or is it designed for HTTP for example? - In other words, can I use it for custom (network-based) app? 5) Have more than one failover server? If the answer for question #4 is "yes", i.e it depends on the service type, then is there any general alternative? Preferably easy to install/configure :)

  Read the article

• Configure Wireless Network Card

  - by Skizz

  I recently upgraded the wireless network card in my Ubuntu PC from an 802.11g to an 802.11n. Now, it can't see my router. It doesn't appear in the list of networks that is displayed when you click on the NetworkManager icon in Gnome. Other networks are listed and I have connected to them (no password required!). I'm using the Windows driver through ndiswrapper and it can see the card. I tested the card in a Windows PC and everything worked. The router's log doesn't show any messages coming from the wireless card. What have I done wrong? If you need any more information, just leave a comment and I'll get add it to the question.

  Read the article

• How to use 2 or more internet connections on the same network?

  - by Rogue

  Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• Routing Traffic on Ubuntu to give Raspberry PI Internet Access

  - by Scruffers

  I'm hoping someone can point me in the right direction for setting up my Linux (Ubuntu 12.04) box to route traffic from eth0 to wlan0. I'll try and explain the problem I am trying to solve: I currently have two separate networks: [RaspberryPi/eth0] 192.168.2.2 / 255.255.255.0 ^ | v [Ubuntu/eth0] 192.168.2.1 / 255.255.255.0 And: [Ubuntu/wlan0] 192.168.1.100 / 255.255.255.0 ^ | v [ADSL router] 192.168.1.1 / 255.255.255.0 So currently if I want to access the RaspberryPI I can SSH from the Ubuntu box to the PI. And if I want to use the Internet, I have full access from the Ubuntu box, but nothing from the RaspberryPI - the two networks are partitioned. What I would like to do is configure things so that the RaspberryPI has Internet access via the Ubuntu box and out to the Internet. I tried to create a bridge, but got the message "wlan0: operation not supported" (wireless chipset is Ralink RT3062). I'm sure giving the Raspberry PI Internet access should be easy to do in this configuration, but I am a bit lost - can someone point me in the right direction please?

  Read the article

• Double Click to open Office docs is slow, File -> Open is fast.

  - by Keith

  I have 2 unique networks. They both share similar architecture: Windows 2003 SBS SP2 Running Symantec Endpoint Running Symantec Information Foundation Shared drives off a data partition Clients running Office 2003 or 2007 Connect to file server through mapped drives When users try to open a file from their local PC by double clicking, it will take 30-60 seconds to open. When they do File - Open, those same documents open up almost immediately. So far I've tried the following - CCleaner to parse the registry of outdated mapped drives - Disabled "using DDE" - Disabled A/V - Reboot Any ideas beyond that? Figured this question belongs here instead of SU since its the same issue on different networks.

  Read the article

• Can remote LogMeIn Hamachi users access our local LAN?

  - by Kev

  Unknown to me, one of the kids has installed LogMeIn Hamachi on his PC so that he can access and play on his pal's Minecraft server, and vice versa. One of the things I did was disable the Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks on the Hamachi NIC in Windows 7's Network Connections. However, my lack of fu when it comes to these types of services is leaving me feeling a little uncomfortable about him using this. Is there anything I should be worried about here? For example, can his friends access our local LAN (which has a number of NAS boxes with unsecured shares) and get up to no good?

  Read the article

• What is causing my internet to be slow on one laptop but not the other and only at a distance?

  - by Matt Case

  I have a newer laptop, purchased within the last year (acer aspire 7740). This laptop does not have any problem connecting to wireless networks and indicates that the signal strength is excellent on most of the wireless networks I connect to. When the laptop is within 10 feet of my wireless router it gets 30 down 10 up. When it is farther away than 10 feet it will be lucky to get 3 down and 1 up. I also have an older laptop, purchased in 2005, that has no problems at all at the same range. None of my phones, gaming consoles or tablets have this problem. I am beginning to think that the problem must be some hardware defect with the wireless card. I can provide additional information if needed. Just thought I'd check to see what others thought because I've been working on computers my whole life and have never heard of this happening. I have also tried to change the channels on my wireless router and have had no success with this idea.

  Read the article

• Can't connect back to the wireless network after the password was changed

  - by 7777

  Family changed the network password and some other network settings after new computers were brought into the house because apparently they wouldn't work with what we had. Actually an off-site tech remotely changed it, and I have no idea what he did. My laptop detects the network (it shows up under available networks) but whenever I try to connect it says: Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again. I wish I could give more details, config settings, but frankly I have no idea what I'm looking for. This is XP (also, not a password issue, I know the password, it's just that I have no idea where to enter it, etc.)

  Read the article

• Distributed Server Monitoring Solution

  - by MaterialEdge

  I belong to an independent IT firm that manages and maintains about 50 business clients networks, ranging from small 5 system networks to 200+ systems. Because we are unable to directly monitor each server at these locations (distributed over a very large area) on a regular basis I am looking for a method to monitor and alert us to any problems that may arise so that we can respond quickly with, hopefully, preventative measures. I'm not sure what solutions are available for this type of situation, but something that utilizes a central server at our business with all client servers sending alerts or logs to it for daily monitoring might work best. All these servers are running a Windows Server OS. In your opinion, what would be the best course of action to accomplish this?

  Read the article

• Allow access to printer between interfaces on Cisco ASA5510

  - by Jonas Stensved

  I have a Cisco ASA5510 where we have to separate networks on two separate interfaces. The networks have and should have nothing to do with each other except that network B needs to access a printer on network A. Network A: 192.168.137.0/24 Printer: 192.168.137.20 Network B: 192.168.0.0/24 I've added an incoming rule from Network A to the Printer IP in the ASDM interface but clients can't print. Our previous router was configured to let traffic through so the clients on Network B is already configured so it think it should work if the traffic is allowed. How do I let clients on Network B communicate with the printer?

  Read the article

• mosh-like port forwarding

  - by Marc Merlin

  This is on linux, connecting to linux servers: I love mosh, but it doesn't support port forwarding, and likely won't for a while since it's been almost a year now and it hasn't happened yet. port forwarding over ssh is great, but because my laptop moves between networks several times a day, my ssh sessions die, and so do the port forwards. I could script/hack something to detect hung ssh and reconnect to get my port forwards back, but before I do this, is there another way to do long lasting port forwards when your source IP changes several times daily (because you go on different networks)? I'm thinking an ssh over UDP would do the trick but of course ssh is over TCP.

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• VLSM help required

  - by user68062

  I have confused myself following a VLSM tutorial and need to get my understanding confirmed, would this be the correct format, or am i away off again 172.31.0.0 VLSM this network address for as many subnetworks as possible, with no more than 14 hosts in each subnetwork. Show the subnet mask used. As the ip address is class b and contains 16 bits in the network portion, this means that we can have 2^16 = 65536 possible networks, to give each of these networks a maximum of 14 hosts we would use the subnet prefix \28 for each subnet. Is this correct? Thanks BB

  Read the article

• Internet connection sharing windows server 2008 R2

  - by This is it

  I have one windows server 2008 r2, and that server has 4 network interfaces (3 private, 1 internet connection). I would like to share internet connection with other 3 networks. Windows server firewall should make logs of data that is transfered. It should not be possible to connect directly to private networks from internet. How could I do it? Edit: I tried with NAT in RRAS, but it doesn't work. Here is the configuration: Server: IP private:192.168.0.1 IP public: xx.xx.xx.xx client IP:192.168.0.2 Default gateway: 192.168.0.1 Public and private interface added in NAT section of RRAS.

  Read the article

• Many ISP's is block port 25, how do I choose an alternative port?

  - by Xeoncross

  I am building an application that will be acting as a combined MUA/MTA on different networks. However, many of the networks are with ISP's that block port 25 for SMTP. Therefore I would also like to open up a secondary port so that some of the installs can communicate on that if port 25 is closed. How do I choose a second port? I know some people use port 26 or port 2525. What is the correct way to choose a port that won't interfere with existing software?

  Read the article

• Wireless option grayed out in Windows Mobility Center

  - by thomasvdb

  We currently have a Lenovo ThinkPad L512 which can't connect to wireless networks. He simply indicates he can't find any networks. Other notebooks (also ThinkPad L512-notebooks) in the company do find the network so nothings wrong with the configuration of the wireless router. As indicated on answer.microsoft.com, I should check Windows Mobility Center and enable the entry "Turn Wireless On". Unfortunately this option has been grayed out. How can I enable this option? There isn't a physical switch on the laptop to turn on the wireless.

  Read the article

• Firewall is blocking internet traffic to OpenVPN clients

  - by user268905

  I have a virtual network setup with a Linux router/firewall connected to two private networks. An OpenVPN server in routing mode and a web server are in one of the networks. On the other are linux client machines which access the webserver and the Internet through the OpenVPN server. Also, external clients can access the OpenVPN from the Internet. The OpenVPN's server.conf is setup to use routing mode in udp, push DNS and routes to the network it is in so clients can access the webserver. Here are my very strict firewall rules. After connecting to the OpenVPN server, my clients can not access the Internet or the web server. When I allow FORWARD traffic to go through, it works just fine. The OpenVPN server has full internet connectivity. What firewall rule do I need to add to allow internet traffic to reach my clients?

  Read the article

• user management in linux

  - by sdr

  what isThe difference between user management in Linux and networks with active directory?

  Read the article

• I have to manually enter the pwd when I login at school and when I come back home with my laptop (DELL E6410)

  - by Bong Paduano

  I didn't have to do this the first 3 months of me going to school. My laptop used to be able to connect to my Home WiFi and school Wifi automatically then after the 3rd month something changed and eversince then I literally have to manually enter each of the Wifi passwords in each location each time I try to connect to their respective WLAN. I tried adding each WiFi networks in the "Manage wireless networks" section in the Network and Sharing Center but everytime I login to one of the location, the created network disappears and I did this more than once. I tried restoring the OS back but to no avail. Can someone please assist me on this issue. I'm not sure if this issue has been addressed in this website but I haven't seen any similar question in here. I appreciate any help anyone may be able to share.

  Read the article

• Wifi network stopped being visible (and usable) (Linksys wag320n)

  - by s427

  Basically, my wifi network simply stopped working for no apparent reason. It doesn't appear in the list of the available networks anymore. I can see all my neighbors' networks, but not mine. It's as if it doesn't exist anymore. The internet connection (non-wifi), which goes through the same modem/router, is fine though. I already had a similar problem about one year ago (see here: Wifi network SSID not visible ), just after buying this very modem. I finally got it to work after performing two factory resets and getting rid of the Cisco "Magic" software; but this time it's not working. I use a linksys router-modem (WAG320N) which is directly connected (via network cable) to my desktop computer (Windows 7). I have (mainly) two devices that use the wifi network: my phone (Samsung Galaxy Nexus) and an Asus tablet (TF201, aka Transformer Prime). I also resurrected an old laptop computer (Dell, running Windows XP) to test that, and it doesn't see anything either (apart from the 20 other wifi networks, of course ^^). This wifi network was working just fine and has been for about a year. I haven't touched the modem settings so I have no idea what's causing the problem. I tried: making my phone "forget" about my network, hoping it would see it again after that: no luck. re-entering the network informations (SSID/password) manually on my phone: still no luck (says it's not in range) exporting the modem configuration, resetting the modem (factory reset, via modem admin), restarting it, importing the configuration: nope. factory reset, turning it off for 15 minutes, restarting, re-factory reset, and entering the configuration manually: still nothing. Has anybody experienced something similar before? Have you any suggestion to fix that? Thanks in advance. PS: to clear things up, here are the settings of my modem regarding wifi: Basic wireless settings: Configuration: manual Radio Band: 2.4GHz Wireless Network Mode: B/G/N-Mixed SSID: s427 Channel Bandwidth: Wide - 40 MHz Channel Wide Channel: 9 - 2.452GHz Standard Channel: 11 - 2.462GHz SSID Broadcast: Enable Advanced Wireless Settings AP Isolation: Disable Authentication Type: Auto Basic Rate: Default Transmission Rate: Auto N Transmission Rate: Auto CTS Protection Mode: Disable Beacon Interval: 100 DTIM Interval: 1 Fragmentation Threshold: 2346 RTS Threshold: 2346

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >