Search Results

Search found 6030 results on 242 pages for 'exists'.

Page 46/242 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • directory resource does not create directory

    - by Dan Tenenbaum
    I have a Vagrantfile that provisions a VM by running a chef recipe. The first resource in the chef recipe is: directory "/downloads" do owner "root" group "root" mode "0755" action :create end # check that it worked: raise "/downloads doesn't exist!" unless File.exists? "/downloads" When I run this at work, it works fine. When I run it at home, it fails, the exception is raised when I check to see if /downloads exists. I'm not sure why this is happening. I would expect it to behave identically, since the underlying Vagrant box is the same both at work and at home. I am a chef newb so perhaps there is something I am not understanding about the order in which the resources are run within my recipe? I would expect them to run in sequential order... I also tried putting a notifies call inside the directory block, where I call another execute block :immediately. That works, but inside the second execute block I test to see whether /downloads has been created and it hasn't. Clearly I'm missing something very basic.

    Read the article

  • Generic that takes only numeric types (int double etc)?

    - by brandon
    In a program I'm working on, I need to write a function to take any numeric type (int, short, long etc) and shove it in to a byte array at a specific offset. There exists a Bitconverter.GetBytes() method that takes the numeric type and returns it as a byte array, and this method only takes numeric types. So far I have: private void AddToByteArray<T>(byte[] destination, int offset, T toAdd) where T : struct { Buffer.BlockCopy(BitConverter.GetBytes(toAdd), 0, destination, offset, sizeof(toAdd)); } So basically my goal is that, for example, a call to AddToByteArray(array, 3, (short)10) would take 10 and store it in the 4th slot of array. The explicit cast exists because I know exactly how many bytes I want it to take up. There are cases where I would want a number that is small enough to be a short to really take up 4 bytes. On the flip side, there are times when I want an int to be crunched down to just a single byte. I'm doing this to create a custom network packet, if that makes any ideas pop in to your heads. If the where clause of a generic supported something like "where T : int || long || etc" I would be ok. (And no need to explain why they don't support that, the reason is fairly obvious) Any help would be greatly appreciated! Edit: I realize that I could just do a bunch of overloads, one for each type I want to support... but I'm asking this question because I want to avoid precisely that :)

    Read the article

  • Compile time type determination in C++

    - by dicroce
    A coworker recently showed me some code that he found online. It appears to allow compile time determination of whether a type has an "is a" relationship with another type. I think this is totally awesome, but I have to admit that I'm clueless as to how this actually works. Can anyone explain this to me? template<typename BaseT, typename DerivedT> inline bool isRelated(const DerivedT&) { DerivedT derived(); char test(const BaseT&); // sizeof(test()) == sizeof(char) char (&test(...))[2]; // sizeof(test()) == sizeof(char[2]) struct conversion { enum { exists = (sizeof(test(derived())) == sizeof(char)) }; }; return conversion::exists; } Once this function is defined, you can use it like this: #include <iostream> class base {}; class derived : public base {}; class unrelated {}; int main() { base b; derived d; unrelated u; if( isRelated<base>( b ) ) std::cout << "b is related to base" << std::endl; if( isRelated<base>( d ) ) std::cout << "d is related to base" << std::endl; if( !isRelated<base>( u ) ) std::cout << "u is not related to base" << std::endl; }

    Read the article

  • Suggestion on Database structure for relational data

    - by miccet
    Hi there. I've been wrestling with this problem for quite a while now and the automatic mails with 'Slow Query' warnings are still popping in. Basically, I have Blogs with a corresponding table as well as a table that keeps track of how many times each Blog has been viewed. This last table has a huge amount of records since this page is relatively high traffic and it logs every hit as an individual row. I have tried with indexes on the fields that are included in the WHERE clause, but it doesn't seem to help. I have also tried to clean the table each week by removing old ( 1.weeks) records. SO, I'm asking you guys, how would you solve this? The query that I know is causing the slowness is generated by Rails and looks like this: SELECT count(*) AS count_all FROM blog_views WHERE (created_at >= '2010-01-01 00:00:01' AND blog_id = 1); The tables have the following structures: CREATE TABLE IF NOT EXISTS 'blogs' ( 'id' int(11) NOT NULL auto_increment, 'name' varchar(255) default NULL, 'perma_name' varchar(255) default NULL, 'author_id' int(11) default NULL, 'created_at' datetime default NULL, 'updated_at' datetime default NULL, 'blog_picture_id' int(11) default NULL, 'blog_picture2_id' int(11) default NULL, 'page_id' int(11) default NULL, 'blog_picture3_id' int(11) default NULL, 'active' tinyint(1) default '1', PRIMARY KEY ('id'), KEY 'index_blogs_on_author_id' ('author_id') ) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=1 ; And CREATE TABLE IF NOT EXISTS 'blog_views' ( 'id' int(11) NOT NULL auto_increment, 'blog_id' int(11) default NULL, 'ip' varchar(255) default NULL, 'created_at' datetime default NULL, 'updated_at' datetime default NULL, PRIMARY KEY ('id'), KEY 'index_blog_views_on_blog_id' ('blog_id'), KEY 'created_at' ('created_at') ) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=1 ;

    Read the article

  • CherryPy always returning HTTP 200 [closed]

    - by DarkArctic
    I'm having a bit of a problem when browsing to a non-existent resource. I get a response code of 200 instead of 404. I'm using the MethodDispatcher and I have a class that overloads the __getattr__ method to instantiate a resource if a child exists or to return AttributeError if one doesn't. My class is always returning the AttributeError correctly, but the data I actually get is always from the last good resource. Here's a simplified (except for __getattr__) version of my class: class BaseResource(object): exposed = True def __init__(self, name): self.children = [] # Pretend this has child resources def __getattr__(self, name): if name in self._children: uuid, application, obj_type, server = self._children[name] try: resource = getattr(app[application], obj_type) except AttributeError as e: raise cherrypy.HTTPError(500, e) return resource(uuid) else: raise AttributeError('Child with name \'{}\' could not be found.'.format(name)) def GET(self): cherrypy.log.error('*** {} not found, raising AttributeError'.format(name)) return 'GET request for {}'.format(self._name) So fetching I get the following when I browse to the following resources: http://localhost:8000/users - This resource exists, so it returns it correctly. http://localhost:8000/users/fake - This returns the "users" resource giving an HTTP 200. http://localhost:8000/users/fake/reallyfake - This returns the "users" resource again. So my question is, where can I start looking to find out why my code isn't returning a 404 for a non-existent resource. I'm sure I've done something wrong, but I'm not sure what. Whatever I did wrong I've undone and I'm now getting a 404 returned correctly. I'm sorry I can't give any detail on what the issue was, but I'm honestly not sure what I did.

    Read the article

  • Could this be considered a well-written PHP5 class?

    - by Ben Dauphinee
    I have been learning OOP principals on my own for a while, and taken a few cracks at writing classes. What I really need to know now is if I am actually using what I have learned correctly, or if I could improve as far as OOP is concerned. I have chopped a massive portion of code out of a class that I have been working on for a while now, and pasted it here. To all you skilled and knowledgeable programmers here I ask: Am I doing it wrong? class acl extends genericAPI{ // -- Copied from genericAPI class protected final function sanityCheck($what, $check, $vars){ switch($check){ case 'set': if(isset($vars[$what])){return(1);}else{return(0);} break; } } // --------------------------------- protected $db = null; protected $dataQuery = null; public function __construct(Zend_Db_Adapter_Abstract $db, $config = array()){ $this->db = $db; if(!empty($config)){$this->config = $config;} } protected function _buildQuery($selectType = null, $vars = array()){ // Removed switches for simplicity sake $this->dataQuery = $this->db->select( )->from( $this->config['table_users'], array('tf' => '(CASE WHEN count(*) > 0 THEN 1 ELSE 0 END)') )->where( $this->config['uidcol'] . ' = ?', $vars['uid'] ); } protected function _sanityRun_acl($sanitycheck, &$vars){ switch($sanitycheck){ case 'uid_set': if(!$this->sanityCheck('uid', 'set', $vars)){ throw new Exception(ERR_ACL_NOUID); } $vars['uid'] = settype($vars['uid'], 'integer'); break; } } private function user($action = null, $vars = array()){ switch($action){ case 'exists': $this->_sanityRun_acl('uid_set', $vars); $this->_buildQuery('user_exists_idcheck', $vars); return($this->db->fetchOne($this->dataQuery->__toString())); break; } } public function user_exists($uid){ return($this->user('exists', array('uid' => $uid))); } } $return = $acl_test->user_exists(1);

    Read the article

  • ASP.NET Image Upload Parameter Not Valid. Exception

    - by pennylane
    Hi Guys, Im just trying to save a file to disk using a posted stream from jquery uploadify I'm also getting Parameter not valid. On adding to the error message so i can tell where it blew up in production im seeing it blow up on: var postedBitmap = new Bitmap(postedFileStream) any help would be most appreciated public string SaveImageFile(Stream postedFileStream, string fileDirectory, string fileName, int imageWidth, int imageHeight) { string result = ""; string fullFilePath = Path.Combine(fileDirectory, fileName); string exhelp = ""; if (!File.Exists(fullFilePath)) { try { using (var postedBitmap = new Bitmap(postedFileStream)) { exhelp += "got past bmp creation" + fullFilePath; using (var imageToSave = ImageHandler.ResizeImage(postedBitmap, imageWidth, imageHeight)) { exhelp += "got past resize"; if (!Directory.Exists(fileDirectory)) { Directory.CreateDirectory(fileDirectory); } result = "Success"; postedBitmap.Dispose(); imageToSave.Save(fullFilePath, GetImageFormatForFile(fileName)); } exhelp += "got past save"; } } catch (Exception ex) { result = "Save Image File Failed " + ex.Message + ex.StackTrace; Global.SendExceptionEmail("Save Image File Failed " + exhelp, ex); } } return result; }

    Read the article

  • Name for a "naive" timekeeping system?

    - by Robert L
    I am thinking of a "naive" timekeeping system of the sort I believe would be likely to be implemented by non-specialists. A day is exactly 24 hours. An hour is exactly 60 minutes. A minute is exactly 60 seconds. No exceptions (i.e. no Daylight Saving or leap seconds). A leap year occurs exactly once every four years: if the year modulo 4 equals 0, it is a leap year. The month lengths are the normal 31 days for January, 28 or 29 days for February, etc., that you would expect to find on a wall calendar. Days of the week, if they are used, are what you would get by taking your contemporary (late 1900's / early 2000's) wall calendar and, using the above rules for leap years and month lengths, extrapolating in both directions: if the calendar goes far back enough, February 29, 1900 exists and is a Wednesday; and if the calendar goes far forward enough, February 29, 2100 exists and is a Monday. What name, if any, is used to describe precisely this system?

    Read the article

  • Retaining column state in grid panel depending on the user settings.

    - by xrx215
    Hi, I have a grid panel where I am retaining the state of the columns.It works fine for all the columns except one where i show or hide the column depending on user settings. If a checkbox is checked then i show the column in grid panel else hide it. In the column model I have defined the column as follows var colModel = new Ext.grid.ColumnModel([{ header: xppo.st('SDE_RESPONSIBILITY_ACTION1'), width: 80, sortable: true, hidden: !showColumn, hideable: !showInMenu, dataIndex: 'ResponsibilityForAction' }} In the grid panel I have given the following if (showColumn) { grid.getColumnModel().setHidden(23, false); } else { grid.getColumnModel().setHidden(23, true); } so i change the value of the checkbox column in the column header is shown (alowing the user to enable and disable in grid panel) or completely not shown in the column menu. So when the column in column menu does not exists it should no longer show that particular column in grid panel.But because I am retaining the state of the grid panel even though the column in column menu does not exists this particular column retains the state i.e it is still shown in grid panel. My question is how can we show or hide columns in grid panel like the way we do in column model.??

    Read the article

  • Velocity engine fails to load template from a remote shared folder

    - by performanceuser
    I have following code File temlateFile = new File( "D:/config/emails/MailBody.vm" ); temlateFile.exists(); VelocityEngine velocityEngine = new VelocityEngine(); velocityEngine.setProperty(RuntimeConstants.RESOURCE_LOADER, "file"); velocityEngine.setProperty("file.resource.loader.class", FileResourceLoader.class.getName()); velocityEngine.setProperty("file.resource.loader.path", temlateFile.getParentFile().getAbsolutePath()); velocityEngine.init(); template = velocityEngine.getTemplate( temlateFile.getName() ); This works because it is loading a file from local file system. Once I change the first like to: File temlateFile = new File( "//remote/config/emails/MailBody.vm" ); It doesn't work. org.apache.velocity.exception.ResourceNotFoundException: Unable to find resource 'MailBody.vm' at org.apache.velocity.runtime.resource.ResourceManagerImpl.loadResource(ResourceManagerImpl.java:474) at org.apache.velocity.runtime.resource.ResourceManagerImpl.getResource(ResourceManagerImpl.java:352) at org.apache.velocity.runtime.RuntimeInstance.getTemplate(RuntimeInstance.java:1533) at org.apache.velocity.runtime.RuntimeInstance.getTemplate(RuntimeInstance.java:1514) at org.apache.velocity.app.VelocityEngine.getTemplate(VelocityEngine.java:373) at com.actuate.iserver.mail.VelocityContent.<init>(VelocityContent.java:33) at com.actuate.iserver.mail.VolumeCreationMail.<init>(VolumeCreationMail.java:40) at com.actuate.iserver.mail.VolumeCreationMail.main(VolumeCreationMail.java:67) In both cases temlateFile.exists() always return true. Any ideas?

    Read the article

  • Mysql - Help me alter this query to apply AND logic instead of OR in searching?

    - by sandeepan-nath
    First execute these tables and data dumps :- CREATE TABLE IF NOT EXISTS `Tags` ( `id_tag` int(10) unsigned NOT NULL auto_increment, `tag` varchar(255) default NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 AUTO_INCREMENT=18 ; INSERT INTO `Tags` (`id_tag`, `tag`) VALUES (1, 'key1'), (2, 'key2'); CREATE TABLE IF NOT EXISTS `Tutors_Tag_Relations` ( `id_tag` int(10) unsigned NOT NULL default '0', `id_tutor` int(10) default NULL, KEY `Tutors_Tag_Relations` (`id_tag`), KEY `id_tutor` (`id_tutor`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `Tutors_Tag_Relations` (`id_tag`, `id_tutor`) VALUES (1, 1), (2, 1); The following query finds all the tutors from Tutors_Tag_Relations table which have reference to at least one of the terms "key1" or "key2". SELECT td . * FROM Tutors_Tag_Relations AS td INNER JOIN Tags AS t ON t.id_tag = td.id_tag WHERE t.tag LIKE "%key1%" OR t.tag LIKE "%key2%" Group by td.id_tutor LIMIT 10 Please help me modify this query so that it returns all the tutors from Tutors_Tag_Relations table which have reference to both the terms "key1" and "key2" (AND logic instead of OR logic). Please suggest an optimized query considering huge number of data records (the query should NOT individually fetch two sets of tutors matching each keyword and then find the intersection).

    Read the article

  • Hibernate many-to-one - bad usage?

    - by DaveA
    Just trying out Hibernate (with Annotations) and I'm having problems with my mappings. I have two entity classes, AudioCD and Artist. @Entity public class AudioCD implements CatalogItem { @Id @GeneratedValue(strategy = GenerationType.AUTO) private int id; private String title; @ManyToOne(cascade = { CascadeType.ALL }, optional = false) private Artist artist; .... } @Entity @Table(uniqueConstraints = { @UniqueConstraint(columnNames = { "name" }) }) public class Artist { @Id @GeneratedValue(strategy = GenerationType.AUTO) private int id; @Column(nullable = false) private String name; ..... } I get AudioCD objects from an external source. When I try to persist the AudioCD the Artist gets persisted as well, just like I want to happen. If I try persisting another different CD, but Artist already exists I get errors due to constraint violations. I want Hibernate to recognise that the Artist already exists and shouldn't be inserted again. Can this be done via annotations? Or do I have to manage the persistence of the AudioCD and Artist seperately?

    Read the article

  • Using VB6 to search for existence of DataFile in Outlook

    - by Graeme
    Hi, I am wanting to write an Add-In for Outlook 2003 which, when Outlook is opened, search for the existence of a datafile called DMSDataStore and if it doesn't exist will install the datafile. I have managed to create the Add-In using VB6 and it runs when I open Outlook. However I haven't found the best/easiest way to search for the existence of the datafile. If the datafile exists it is visible within Outlook under the user's mailbox, much the same as an archive folder is. I would like to be able to search for it by name which is DMSDataFile. I did try - Set tmpInbox = parentFolder.Folders("DMSDataFile") This works OK if the datafile exists but will throw an error if it doesn't. I can create an error handler which will then install the datafile but this doesn't seem like a very tidy way of doing things. I guess I might have to recursively search for the datafile. Can someone let me know what is the best / easiest way to search for the datafile using the name of the datafile and give me some code with which to do it. Thanks G

    Read the article

  • Custom Drupal Module not creating any tables

    - by Anthony
    Anything specific I need in the module file? Install File function module_install() { //lets create the school database $create_table_sql = "CREATE TABLE IF NOT EXISTS `table1` ( id int(11) NOT NULL, principal_name varchar(300) NOT NULL, school_name varchar(300) NOT NULL, address1 varchar(300) NOT NULL, address2 varchar(300) NOT NULL, city varchar(300) NOT NULL, computer_serial_no varchar(300) NOT NULL, state varchar(200) NOT NULL, uid int(200) NOT NULL ) ENGINE=InnoDB DEFAULT CHARSET=latin1"; db_query($create_table_sql); //lets create the student database $create_table_sql = "CREATE TABLE IF NOT EXISTS table2 ( id int(11) NOT NULL, principal_name varchar(300) NOT NULL, school_name varchar(300) NOT NULL, address1 varchar(300) NOT NULL, address2 varchar(300) NOT NULL, city varchar(300) NOT NULL, computer_serial_no varchar(300) NOT NULL, state varchar(200) NOT NULL, uid int(200) NOT NULL ) ENGINE=InnoDB DEFAULT CHARSET=latin1"; db_query($create_table_sql); } /** * _UNINSTALL hook * * This function is run to uninstall the module. * */ function module_uninstall() { // Delete the DB db_query("drop table table1"); db_query("drop table table2"); } Info File Just in Case ; $Id$ name = My Module description = This module deals with blah blah package = Somepackage core = 6.x version = "6.x-1.0" core = "6.x"

    Read the article

  • What C# container is most resource-efficient for existence for only one operation?

    - by ccornet
    I find myself often with a situation where I need to perform an operation on a set of properties. The operation can be anything from checking if a particular property matches anything in the set to a single iteration of actions. Sometimes the set is dynamically generated when the function is called, some built with a simple LINQ statement, other times it is a hard-coded set that will always remain the same. But one constant always exists: the set only exists for one single operation and has no use before or after it. My problem is, I have so many points in my application where this is necessary, but I appear to be very, very inconsistent in how I store these sets. Some of them are arrays, some are lists, and just now I've found a couple linked lists. Now, none of the operations I'm specifically concerned about have to care about indices, container size, order, or any other functionality that is bestowed by any of the individual container types. I picked resource efficiency because it's a better idea than flipping coins. I figured, since array size is configured and it's a very elementary container, that might be my best choice, but I figure it is a better idea to ask around. Alternatively, if there's a better choice not out of resource-efficiency but strictly as being a better choice for this kind of situation, that would be nice as well.

    Read the article

  • [PHP] Script looking for string in file breaks

    - by Kel
    Hey guys. I'm running a script that looks for a specific term in a pdf file. Well, actually I'm reading the pdf file as a txt file and look for the term there. The script processes over 20k files. But, unexpectedly, the script breaks after it hits a file that is over 50mb long. It stops. What could the reason be? Here's an excerpt of the script: // Proceed if file exists if(file_exists($sourcePath)){ echo "file exists\n"; if(filesize($sourcePath) > 0){ echo "filesize is greater than 0\n"; $pdfFile = fopen($sourcePath,"rb"); $data = fread($pdfFile, filesize($sourcePath)); fclose($pdfFile); // Search for string if(stripos($data,$searchFor)){ echo "Success. encrypt found\r\n"; fwrite($errorFileHandler,"Success. encrypt found\r\n"); }else{ ..... } ... ... What could be the problem?

    Read the article

  • Could this be considered a well-written class (am I using OOP correctly)?

    - by Ben Dauphinee
    I have been learning OOP principals on my own for a while, and taken a few cracks at writing classes. What I really need to know now is if I am actually using what I have learned correctly, or if I could improve as far as OOP is concerned. I have chopped a massive portion of code out of a class that I have been working on for a while now, and pasted it here. To all you skilled and knowledgeable programmers here I ask: Am I doing it wrong? class acl extends genericAPI{ // -- Copied from genericAPI class protected final function sanityCheck($what, $check, $vars){ switch($check){ case 'set': if(isset($vars[$what])){return(1);}else{return(0);} break; } } // --------------------------------- protected $db = null; protected $dataQuery = null; public function __construct(Zend_Db_Adapter_Abstract $db, $config = array()){ $this->db = $db; if(!empty($config)){$this->config = $config;} } protected function _buildQuery($selectType = null, $vars = array()){ // Removed switches for simplicity sake $this->dataQuery = $this->db->select( )->from( $this->config['table_users'], array('tf' => '(CASE WHEN count(*) > 0 THEN 1 ELSE 0 END)') )->where( $this->config['uidcol'] . ' = ?', $vars['uid'] ); } protected function _sanityRun_acl($sanitycheck, &$vars){ switch($sanitycheck){ case 'uid_set': if(!$this->sanityCheck('uid', 'set', $vars)){ throw new Exception(ERR_ACL_NOUID); } $vars['uid'] = settype($vars['uid'], 'integer'); break; } } private function user($action = null, $vars = array()){ switch($action){ case 'exists': $this->_sanityRun_acl('uid_set', $vars); $this->_buildQuery('user_exists_idcheck', $vars); return($this->db->fetchOne($this->dataQuery->__toString())); break; } } public function user_exists($uid){ return($this->user('exists', array('uid' => $uid))); } } $return = $acl_test->user_exists(1);

    Read the article

  • Stopping a SoundPlayer loop at the local level

    - by EvanRyan
    I'm working on setting up an alarm that pops up as a dialog with multiple sound file options the user can choose from. The problem I'm having is creating a sound player at the local level that I can close with a button. The problem I'm having is that the sound keeps looping when I close the form because the SoundPlayer doesn't exist within the button click event. here's what I have: void callsound() { if (SoundToggle == 0) // if sound enabled { if ((SoundFile == 0) && (File.Exists(@"attention.wav"))) { System.Media.SoundPlayer alarm = new System.Media.SoundPlayer(@"attention.wav"); alarm.PlayLooping(); } if ((SoundFile == 1) && (File.Exists(@"aahh.wav"))) { System.Media.SoundPlayer alarm = new System.Media.SoundPlayer(@"aahh.wav"); alarm.PlayLooping(); } } private void button1_Click(object sender, EventArgs e) { //alarm.Stop(); Only works if SoundPlayer declared at class level this.Close(); } Is there a way I can do what I want to do by declaring the SoundPlayer instances where I am? Or is there a way to declare it at the class level, and still be able to change the sound file based on user settings?

    Read the article

  • How can I determine whether or not to add project items using IWizard?

    - by taarskog
    Hi, I am generating entity wrappers in VS2010 based on dynamic objects in a CRM system. In addition to the entity code, I want to add an EntityBase of which all entities inherit from. If the file exists in the project from before, it should not be added. I am using an IWizard implementation to give the generator the object names etc. Is it possible in the IWizard implementation to determine whether or not to add an item if it exists in the project from before? How do I get a hold of the project handle and its items in or before the ShouldAddProjectItem method? My code so far (not completed): public class EntityWizardImplementation : IWizard { public void BeforeOpeningFile(ProjectItem projectItem) { //Note: Nothing here. } public void ProjectFinishedGenerating(Project project) { //Note: Nothing here. } public void ProjectItemFinishedGenerating(ProjectItem projectItem) { //Note: Nothing here. } public void RunFinished() { //Note: Nothing here. } public void RunStarted(object automationObject, Dictionary<string, string> replacementsDictionary, WizardRunKind runKind, object[] customParams) { try { var window = new WizardWindow(); // Replace parameters gathered from the wizard replacementsDictionary.Add("$crmEntity$", window.CrmEntity); replacementsDictionary.Add("$crmOrganization$", window.CrmOrganization); replacementsDictionary.Add("$crmMetadataServiceUrl$", window.CrmMetadataUrl); window.Close(); } catch (SoapException se) { MessageBox.Show(se.ToString()); } catch (Exception e) { MessageBox.Show(e.ToString()); } } public bool ShouldAddProjectItem(string filePath) { // This is where I assume it is correct to handle the preexisting file. return true; } }

    Read the article

  • Using placeholders/variables in a sed command

    - by jesse_galley
    I want to store a specific part of a matched result as a variable to be used for replacement later. I would like to keep this in a one liner instead of finding the variable I need before hand. when configuring apache, and use mod_rewrite, you can specificy specific parts of patterns to be used as variables,like this: RewriteRule ^www.example.com/page/(.*)$ http://www.example.com/page.php?page=$1 [R=301,L] the part of the pattern match that's contained inside the parenthesis is stored as $1 for use later. So if the url was www.example.com/page/home, it would be replaced with www.example.com/page.php?page=home. So the "home" part of the match was saved in $1 because it was the part of the pattern inside the parenthesis. I want something like this functionality with a sed command, I need to automatically replace many strings in a SQL dump file, to add drop table if exist commands before each create table, but I need to know the table name to do this, so if the dump file contains something like: ... CREATE TABLE `orders` ... I need to run something like: cat dump.sql | sed "s/CREATE TABLE `(.*)`/DROP TABLE IF EXISTS $1\N CREATE TABLE `$1`/g" to get the result of: ... DROP TABLE IF EXISTS `orders` CREATE TABLE `orders` ... I'm using the mod_rewrite syntax in the sed command as a logical example of what I'm trying to do. Any suggestions?

    Read the article

  • MySQL query problem

    - by Luke
    Ok, I have the following problem. I have two InnoDB tables: 'places' and 'events'. One place can have many events, but event can be created without entering place. In this case event's foreign key is NULL. Simplified structure of the tables looks as follows: CREATE TABLE IF NOT EXISTS `events` ( `id` int(11) unsigned NOT NULL AUTO_INCREMENT, `name` varchar(255) COLLATE utf8_bin NOT NULL, `places_id` int(9) unsigned DEFAULT NULL, PRIMARY KEY (`id`), KEY `fk_events_places` (`places_id`), ) ENGINE=InnoDB; ALTER TABLE `events` ADD CONSTRAINT `events_ibfk_1` FOREIGN KEY (`places_id`) REFERENCES `places` (`id`) ON DELETE CASCADE ON UPDATE NO ACTION; CREATE TABLE IF NOT EXISTS `places` ( `id` int(9) unsigned NOT NULL AUTO_INCREMENT, `name` varchar(255) COLLATE utf8_bin NOT NULL, PRIMARY KEY (`id`), ) ENGINE=InnoDB; Question is, how to construct query which contains name of the event and name of the corresponding place (or no value, in case there is no place assigned?). I am able to do it with two queries, but then I am visibly separating events which have place assigned from the ones that are without place. Help really appreciated.

    Read the article

  • Why does my code fail to create a directory in "C:\Program Files" under Windows 7?

    - by sunil.nishad87
    I am using Windows 7 and I have to run one program in that windows but that program working in Windows XP. This is a Visual C++ program and I am using Visual Studio 2008 for this. When I am running my application, it does not throw any errors, but it does not create a directory in "c:\program files\". So can anyone help me to create directory and exe file? This is the code I am using: char szAppPath[MAX_PATH]; char szFileName[MAX_PATH]; DWORD dwResult; WIN32_FIND_DATA FindFileData; HANDLE hFind; dwResult = ExpandEnvironmentStrings( NULL, szAppPath, MAX_PATH); // "%ProgramFiles%" // do same for NSim directory strcat(szAppPath,"\\NSim"); hFind = FindFirstFile(szAppPath, &FindFileData); if (hFind == INVALID_HANDLE_VALUE) { //Directory Does't Exists create New if(!CreateDirectory(szAppPath,NULL)) //Throw Error { MessageBox("Unable to Create N-SIM directory","NSim Installer"); return ; } } else { //check if is directory or not if(!(FindFileData.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)) { MessageBox("Can't Create N-SIM directory\n Another file with same name exists","NSim Installer"); return ; } FindClose(hFind); } //***************************************N-SIM Application**************************** strcpy(szFileName, szAppPath); HRSRC hRes; if( bRegister == FALSE) { strcat(szFileName,"\\NSim.exe"); //make same name of the Client & Server in program file hRes = FindResource(NULL, MAKEINTRESOURCE(IDR_LANSIMSERVER),RT_RCDATA); if(flagUpgrade ==0) { CString trial = installationDate(); //----- Detemine Expiry Date ----- setRegistry(trial); } }

    Read the article

  • Creating dynamic icons based on data entered into database from django forms

    - by John Hoke
    So I'm using Django to create a projects page with multiple forms for each project. Let's call them form 1, 2, 3, and 4. Once you create a project you can fill out any of these forms. I want to create "buttons" or links for each one of the forms that would show up on the main page. Now this is the part I need help with: Step 1. I want it so that if you click on a button for a form (say form 1) and none exists for that project yet a pop up would come up saying "This form does not exist yet, are you sure you want to create one?". And if you'd answer yes you would be directed to the form page. Step 2. But if that form does exist, I don't want any pop up to open and I want the link to take the user directly to that page. Step 3. My next problem is this. These forms are in order, so if you didn't create form 1 but created form 2, I don't want to give the user access to form 1. So in this scenario, if you click on form 1 I want a pop up to open and say "This form can no longer be created", and the link wouldn't function anymore. Basically the button will have 3 function. First it should look at the database and if data for that specific form exists it should do "Step 2", if data for that form and the proceeding forms don't exist it should do "Step 1", and if data for that form doesn't exist but data for proceeding form's does exist is should do "Step 3". Is this possible? Please help as I need to find a solution to this soon. Any help would be highly appreciated. Thank you

    Read the article

  • How do I delete duplicates between two excel sheets quickly vba

    - by MainTank
    I am using vba and I have two sheets one is named "Do Not Call" and has about 800,000 rows of data in column A. I want to use this data to check column I in the second sheet, named "Sheet1". If it finds a match I want it to delete the whole row in "Sheet1". I have tailored the code I have found from a similar question here: Excel formula to Cross reference 2 sheets, remove duplicates from one sheet and ran it but nothing happens. I am not getting any errors but it is not functioning. Here is the code I am currently trying and have no idea why it is not working Option Explicit Sub CleanDupes() Dim wsA As Worksheet Dim wsB As Worksheet Dim keyColA As String Dim keyColB As String Dim rngA As Range Dim rngB As Range Dim intRowCounterA As Integer Dim intRowCounterB As Integer Dim strValueA As String keyColA = "A" keyColB = "I" intRowCounterA = 1 intRowCounterB = 1 Set wsA = Worksheets("Do Not Call") Set wsB = Worksheets("Sheet1") Dim dict As Object Set dict = CreateObject("Scripting.Dictionary") Do While Not IsEmpty(wsA.Range(keyColA & intRowCounterA).Value) Set rngA = wsA.Range(keyColA & intRowCounterA) strValueA = rngA.Value If Not dict.Exists(strValueA) Then dict.Add strValueA, 1 End If intRowCounterA = intRowCounterA + 1 Loop intRowCounterB = 1 Do While Not IsEmpty(wsB.Range(keyColB & intRowCounterB).Value) Set rngB = wsB.Range(keyColB & intRowCounterB) If dict.Exists(rngB.Value) Then wsB.Rows(intRowCounterB).delete intRowCounterB = intRowCounterB - 1 End If intRowCounterB = intRowCounterB + 1 Loop End Sub I apologize if the above code is not in a code tag. This is my first time posting code online and I have no idea if I did it correctly.

    Read the article

  • Why would this query cause a Merge Cartesian Join in Oracle

    - by decompiled
    I have a query that was recently required to be modified. Here's the original SELECT RTRIM (position) AS "POSITION", . // Other fields . . FROM schema.table x WHERE hours > 0 AND pay = 'RGW' AND NOT EXISTS( SELECT position FROM schema.table2 y where y.position = x.position ) Here's the new version SELECT RTRIM (position) AS "POSITION", . // Other fields . . FROM schema.table x WHERE hours > 0 AND pay = 'RGW' AND NOT EXISTS( SELECT position FROM schema.table2 y where y.date = get_fiscal_year_start_date (SYSDATE) AND y.position = x.position ) The UDF get_fiscal_year_start_date() returns the fiscal year start date of the date parameter. The first query runs fine, but the second creates a merge Cartesian join. I looked at the indexes on the tables and found that position and date were both indexed. My question for you stackoverflow is why would the addition of 'y.date = get_fiscal_year_start_date (SYSDATE)' cause a merge cartesian join in Oracle 10g.

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >