Search Results

Search found 32520 results on 1301 pages for 'local machine'.

Page 48/1301 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Whats the difference between local and remote addresses in 2008 firewall address

  - by Ian

  In the firewall advanced security manager/Inbound rules/rule property/scope tab you have two sections to specify local ip addresses and remote ip addresses. What makes an address qualify as a local or remote address and what difference does it make? This question is pretty obvious with a normal setup, but now that I'm setting up a remote virtualized server I'm not quite sure. What I've got is a physical host with two interfaces. The physical host uses interface 1 with a public IP. The virtualized machine is connected interface 2 with a public ip. I have a virtual subnet between the two - 192.168.123.0 When editing the firewall rule, if I place 192.168.123.0/24 in the local ip address area or remote ip address area what does windows do differently? Does it do anything differently? The reason I ask this is that I'm having problems getting the domain communication working between the two with the firewall active. I have plenty of experience with firewalls so I know what I want to do, but the logic of what is going on here escapes me and these rules are tedious to have to edit one by one. Ian

  Read the article

• Setting up dnsmasq for a local network

  - by WishCow

  Me, and a small group of developers have just moved to a new office, and I'd like to set up dnsmasq on our development server, so when we deploy web apps there, we don't have to edit our own hosts files. We have a router at 192.168.3.1 which we don't have access to. I figured I'd install a DNS server on the development box, and we all record it's IP as a secondary DNS server. Unfortunately I'm strugling to make this work. The name of the devel server is devbox, it's IP is 192.168.3.99, and it's running the latest Ubuntu Server (Karmic) My computer is running Ubuntu Desktop (Karmic) What I'd like to achieve Let's say I have three websites, website1, website2, website3, running on the development box. I'd like to access them by the urls: http://website1.devbox http://website2.devbox http://website3.devbox So I have configured Apache on the devel box, installed dnsmasq, and put the following lines into it's hosts file: 192.168.3.99 website1.devbox 192.168.3.99 website2.devbox 192.168.3.99 website3.devbox and edited my own resolv.conf file to include the devel box as a nameserver: nameserver 192.168.3.99 It's working fine, I can access the sites. The problem is that it doesn't scale well. I'd like all the domains ending with .devbox forwarded to the development box, and this is what I'm struggling with. I have tried putting 192.168.3.99 devbox into the hosts file, and editing the line in dnsmasq.conf: # Add local-only domains here, queries in these domains are answered # from /etc/hosts or DHCP only. local=/devbox/ But I cannot get it working. If I try any url that is not explicitly present in the development box's hosts file, the dns lookup fails. Is the local directive for something else? Am I looking at the wrong place?

  Read the article

• Setting up dnsmasq for a local network

  - by WishCow

  Me, and a small group of developers have just moved to a new office, and I'd like to set up dnsmasq on our development server, so when we deploy web apps there, we don't have to edit our own hosts files. We have a router at 192.168.3.1 which we don't have access to. I figured I'd install a DNS server on the development box, and we all record it's IP as a secondary DNS server. Unfortunately I'm strugling to make this work. The name of the devel server is devbox, it's IP is 192.168.3.99, and it's running the latest Ubuntu Server (Karmic) My computer is running Ubuntu Desktop (Karmic) What I'd like to achieve Let's say I have three websites, website1, website2, website3, running on the development box. I'd like to access them by the urls: http://website1.devbox http://website2.devbox http://website3.devbox So I have configured Apache on the devel box, installed dnsmasq, and put the following lines into it's hosts file: 192.168.3.99 website1.devbox 192.168.3.99 website2.devbox 192.168.3.99 website3.devbox and edited my own resolv.conf file to include the devel box as a nameserver: nameserver 192.168.3.99 It's working fine, I can access the sites. The problem is that it doesn't scale well. I'd like all the domains ending with .devbox forwarded to the development box, and this is what I'm struggling with. I have tried putting 192.168.3.99 devbox into the hosts file, and editing the line in dnsmasq.conf: # Add local-only domains here, queries in these domains are answered # from /etc/hosts or DHCP only. local=/devbox/ But I cannot get it working. If I try any url that is not explicitly present in the development box's hosts file, the dns lookup fails. Is the local directive for something else? Am I looking at the wrong place?

  Read the article

• update all the servers through one virtual servers using Storage are network virtual machine

  - by Mr.Calm

  Using UBUNTU and Virtal Box by Oracle, and Using this script to start nginx in Virtual Box, and placing it in Virtual box inside~/init.d #!/bin/bash ### BEGIN INIT INFO # Provides: Testinit # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO # RETVAL=0; start() { CurrentTime=$(date +%d/%m/%Y"-"%I:%M:%S) ./usr/local/nginx/sbin/nginx echo "Current Time:"$CurrentTime>>/home/server/Desktop/NginxLogs.txt echo "!Starting nginx!" >>/home/server/Desktop/NginxLogs.txt Like this i want to write auto script (setup.sh file) and place that script in all virtual boxes inside my system, for example 8 virtual boxes and in all Virtual boxes NGINX is installed. Now, The thing is i am facing problem when i want change something in setup.sh i have to go to each and every virtual box, or Communicate each Virtual machine through SSH from my main machine. i am thinking to write another script (ex: Update.sh),and inside that script we give one path of file which is saved and recently edited in main machine (ex: DummySetup.sh). as soon as i run that script all the setup.sh files which are saved in each virtual machines should update the change or replace contents with DummySetup.sh's contents. Hope this is possible thing. Help would be appreciated.Thanking you

  Read the article

• Can't Connect To Local Mysql Using IP Address, but CAN connect from remote server

  - by user1782041

  Here's an interesting one that does not seem to fall into any of the mysql connection issues I've read about or searched for: On an Ubuntu 12.04 box I had some system updates waiting to install, and I took care of that this evening. After the install, I started seeing some errors in my syslog complaining about a particular php script that could no longer connect to the mysql instance on the box. Here is the specific error: PHP Warning: mysql_connect(): Can't connect to MySQL server on '192.168.0.40' (4) Now, the server's IP address is 192.168.0.40, and I've checked to make sure that I have mysql listening on 0.0.0.0 so that I can connect using either "localhost" or "192.168.0.40". Here's where things get odd: From the local machine, if I try the following: mysql -uroot -p -h192.168.0.40 I get this error: ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.0.40' (110) I've checked, and error 110 indicates an OS timeout, and error 2003 is the mysql generic "can't connect" error. This indicates that it is not permissions with the user. However, if I do the same thing from a remote machine (say, from 192.168.0.30), I log right in with no problems. Futher, other scripts on the local machine that connect to mysql using "localhost" for the host rather than "192.168.0.40" connect with no problems. Also, I can connect via the mysql socket with no problems both from the command line and php scripts. So, this feels like a networking issue of some kind on the local box, but there are no iptables rules on this box (it is firewalled externally) and I can't figure out what else may be causing this. This problematic script worked perfectly prior to the latest system update. For now, I'll simply change the script to connect via localhost, but I'd really like to know why it broke for 2 reasons: There may be other scripts that connect using 192.168.0.40 that don't run very often which are now broken. Auditing them all will take more time than I feel like devoting at the moment. I'm curious, and want to know why it broke so I can fix it correctly. Any help?

  Read the article

• Virtual Machines: What components should I upgrade to improve running virtual machines?

  - by joshsvoss

  at work I need to have one or sometimes two instances of a vmware virtual Windows 7 machine running on my real Windows 7 machine. The computer I'm using is Dell Precision 490 from 2009 I believe, possibly earlier. Running Windows 7 ultimate. Problems while running VM's: The entire computer slows down when a vmware instance is running. Pages take a while to react to a scroll, applications take forever to launch, and programs hang both in the virtual machines and on the real one. So, what components should I upgrade to improve this? I guess a more pointed question would be, which components will help the most? Possible options: Getting 8gb of RAM instead of 4gb new graphics card new processors? (Is that really an option?) My intuition tells me it will be a combination of the RAM and graphics card. There is also the possibility that an '09 tower just isn't cut out for vm's and our business should purchase a new tower.

  Read the article

• Difference in performance: local machine VS amazon medium instance

  - by user644745

  I see a drastic difference in performance matrix when i run it with apache benchmark (ab) in my local machine VS production hosted in amazon medium instance. Same concurrent requests (5) and same total number of requests (111) has been run against both. Amazon has better memory than my local machine. But there are 2 CPUs in my local machine vs 1 CPU in m1.medium. My internet speed is very low at the moment, I am getting Transfer rate as 25.29KBps. How can I improve the performance ? Do not know how to interpret Connect, Processing, Waiting and total in ab output. Here is Localhost: Server Hostname: localhost Server Port: 9999 Document Path: / Document Length: 7631 bytes Concurrency Level: 5 Time taken for tests: 1.424 seconds Complete requests: 111 Failed requests: 102 (Connect: 0, Receive: 0, Length: 102, Exceptions: 0) Write errors: 0 Total transferred: 860808 bytes HTML transferred: 847155 bytes Requests per second: 77.95 [#/sec] (mean) Time per request: 64.148 [ms] (mean) Time per request: 12.830 [ms] (mean, across all concurrent requests) Transfer rate: 590.30 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.5 0 1 Processing: 14 63 99.9 43 562 Waiting: 14 60 96.7 39 560 Total: 14 63 99.9 43 563 And this is production: Document Path: / Document Length: 7783 bytes Concurrency Level: 5 Time taken for tests: 33.883 seconds Complete requests: 111 Failed requests: 0 Write errors: 0 Total transferred: 877566 bytes HTML transferred: 863913 bytes Requests per second: 3.28 [#/sec] (mean) Time per request: 1526.258 [ms] (mean) Time per request: 305.252 [ms] (mean, across all concurrent requests) Transfer rate: 25.29 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 290 297 14.0 293 413 Processing: 897 1178 63.4 1176 1391 Waiting: 296 606 135.6 588 1171 Total: 1191 1475 66.0 1471 1684

  Read the article

• How to remap IPs visible from local machine to IPs visible from a machine I have SSH access to?

  - by gooli

  I'm so far out of my depth I don't even know what to google for. There's a server I can connect to via SSH. Via that server I can access other server on its subnet via SSH. What I want to do is be able to access the machines that server has access to directly. Say the server IP is 192.168.7.7 and is the only one in the 192.168.x.x range I have access to. I'd like to configure things in such a way that when I to access say 192.168.7.100 on my machine, the connection will go through an SSH tunnel I open to 192.168.7.7 and out to 192.168.7.100. I would like this to work for any port if at all possible. I know I can set an HTTP proxy and even a SOCKS proxy, but I'm wondering is there is a way to actually remap some of the IP my machine sees to IP only visible from the remote machine. What would this configuration be called? IS this NAT, VPN, IP2IP or something else? How can I set up this on a Windows client box that connects via SSH to a Linux box? Sounds to me like I need to set up some kind of filtering on the network driver or possibly a virtual NIC, but I'm not sure where to go next.

  Read the article

• Get cryptic error when trying to create a snapshot of any of my VMs

  - by Zolt

  I'm using Oracle VM VirtualBox. I have 6 VMs that I've imported. When I click on an individual VM, and then click the camera image (or Ctrl+Shift+S) to take a snapshot, the snapshot process fails and VirtualBox gives the following error: Failed to create a snapshot of the virtual machine vmName. Details: Result Code: VBOX_E_IPRT_ERROR (0x80BB0005) This happens not only for one of my VMs, but all of them, if I try to take a snapshot of each one separately, one at a time. My computer is a Windows 7 machine. I have 200 GB free on my hard drive, and I see no reason why the error should occur. I can import VMs, run them, and clone then without any problems. Can anyone tell me what to do to fix the issue?

  Read the article

• HAProxy "503 Service Unavailable" for webserver running on a KVM virtual machine

  - by Menda

  I'm setting up a server with KVM (IP 192.168.0.100) and I have created inside of it one virtual machine using network bridging at 192.168.0.194. This virtual machine has an nginx instance running, which I can access from the server or from any computer computer in the internal network just typing in the browser http://192.168.0.194. However, I try configure HAProxy in the same server that hosts KVM and looking the status page of HAProxy it always shows the virtual machine as "DOWN". If I try from the server http://localhost, it should be the same than if I go to http://192.168.0.194. My goal is to build a reverse proxy, but I tried this little example and won't work. What am I doing bad? This is my config file in the server: # /etc/haproxy/haproxy.cfg global maxconn 4096 user haproxy group haproxy daemon defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen ServerStatus *:8081 mode http stats enable stats auth haproxy:haproxy listen Server *:80 mode http balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /check.txt HTTP/1.0 server mv1 192.168.0.194:80 cookie A check Thanks.

  Read the article

• How do I import large sql file to local LAMP (xampp) environment

  - by mraslton

  I have used Linux to import a large mysql dump file (into a new database), but am new to how the process works in a local LAMP environment using xampp, as xampp does not support SSH. I've dowloaded the large_dump_file.sql from the Linux server to my local system. I'm using Windows XP and have used xampp to setup LAMP. I am able to access the local_database via phpMyAdmin, but the dump file is too large to import using that app. I'm trying to import the file via the command prompt, but so far with no success. At the prompt: cd .. cd .. cd xampp cd mysql cd bin I've found that mysqlimport is used to import .csv and .txt files, and mysql is used to import .sql files, but can't find documentation as to whether or not to use the -u -p options so I've tried many variations of the command with no luck. What would be the proper command? I've modified the hosts, virtual-hosts conf, and apache config files. Do I need to change any other config files on my local system? Thanks.

  Read the article

• Local DNS and Apache Server Configuration Interferring - example.com / www.example.com

  - by nicorellius

  I have a domain for my site: example.com I am also running local DNS with these lines: www IN CNAME server.<host_provider>.com. dev IN CNAME server.<host_provider>.com. So www.example.com and dev.example.com go to production and development sites, respectively, that are hosted by a host company. In my Apache configuration for the main site, I'm running a rewrite rule like this: RewriteEngine ON RewriteCond %{HTTP_HOST} ^example\.com$|!dev\.example\.com$ [NC] RewriteRule ^(.*)$ http://www\.%{HTTP_HOST}/$1 [R=302,L,NE] This rule seems to work, as when you are off the network and go to example.com in the browser, you get redirected to www.example.com. The problem is when I'm on the network, and I go to example.com I get an error page, saying page can't be found. No server errors; just a page can't be found, as if the local DNS is causing it to stop looking at that point. I'm also using Nettica for DNS service and have this A record in place: example.com Host (A) Default xxx.xx.xxx.xx This handles the external DNS, but my problem seems to be related to my internal DNS. For example, inside my network, I can go to servers on the network with addresses like this: server.example.com server1.example.com server2.example.com These are configured in my local DNS. I'm just not sure how to get past the "empty" subdomain and go to example.com. Adding to this since it might not be clear. If I'm out side the example.com network, on another network, like example123.com, then when I go to example.com I'm redirected to www.example.com as expected, eg, the Apache rewrite rule is working. Thanks in advance for any information.

  Read the article

• Redirect local, not internal, requests using SuSEfirewall2 or an iptables rule

  - by James

  I have a server that is running a web application deployed on Tomcat and is sitting in a test network. We're running SuSE 11 sp1 and have some redirection rules for incoming requests. For example we don't bind port 80 in Tomcat's server.xml file, instead we listen on port 9600 and have a configuration line in SuSEfirewall2 to redirect port 80 to 9640. This is because Tomcat doesn't run as root and can't open up port 80. My web application needs to be able to make requests to port 80 since that is the port it will be using when deployed. What rule can I add so that local requests get redirected by iptables? I tried looking at this question: How do I redirect one port to another on a local computer using iptables? but suggestions there didn't seem to help me. I tried running tcpdump on eth0 and then connecting to my local IP address (not 127.0.0.1, but the actual address) but I didn't see any activity. I did see activity if I connected from an external machine. Then I ran tcmpdump on lo, again tried to connect and this time I saw activity. So this leads me to believe that any requests made to my own IP address locally aren't getting handled by iptables. Just for reference he's what my NAT table looks like now: Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:http redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:xfer redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:https redir ports 8443 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Time capsule on windows 7

  - by Kiva

  Hi guys, I have a time machine to backup my mac book pro. All work fine with it. Now, my girlfriend have a PC on windows 7. She wants to backup her PC with cobian backup on the time machine. But her PC doesn't see the time capsule, so it's impossible to connect it. The Time capsule is connected on my box adsl with wifi and the mac and the pc are connected on the box with wifi. Why windows doesn't see the TC ? I installed "bonjour" on the PC but nothing worked. Thanks for your help.

  Read the article

• What are the limitations of virtual machines?

  - by j-g-faustus

  I'm considering setting up a virtual machine running Windows, with Ubuntu 10.10 as the host OS, for those cases where I have a Windows-only program. I understand that using a VM will lose some performance, but are there other limitations to what the OS in a virtual machine can do compared to "running on bare metal"? For example: Can a VM play games, like Dragon Age Origins or Civilization V? (Possibly with poorer framerates and/or lower resolution, but does it play at all?) Can a VM rip DVD/Blue-ray using AnyDVD or similar Windows program? Can a VM handle new hardware that requires dedicated drivers, but the drivers are only available for the OS running inside the VM? (Ex. graphics card, digital camera, card reader for smart card authentication.) Is it possible to say anything about "general limitations" of VMs, or is this wholly dependent on the specific VM?

  Read the article

• Local references to old server name remain after Windows 2003 server rename

  - by imagodei

  I have a standalone Win 2003 server with Windows Sharepoint Services (WSS3) running on it. I had to rename the server and I had bunch of problems resulting from this. Note that the server is not in AD environment. Most obvious problems were with Sharepoint, which didn't work. I was somewhat naive to think it will work in the first place, but OK - I've solved this using step 1 & 3 from this site (TNX) Other curious behavior/problems remain. Most disturbing is that Sharepoint isn't able to send email notifications to participants. I noticed there are several references to old server name everywhere I look: in Registry, in Windows Internal Database (MICROSOFT##SSEE). I see instances of old server name in the Sharepoint Central Administration - Operations - Servers in farm. There is reference to a servers: oldname.domain.local oldname.local On one of those servers there is also Windows SharePoint Services Outgoing E-Mail Service (Stopped). Also, when I try to telnet locally to the mail server (Simple Mail Transfer Protocol (SMTP) service), I get a response: 220 oldname.domain.local Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Tue, 15 Jun 2010 13:56:19 +0200 IMO these strange naming problems are also the reason why email notifications from within Sharepoint don't work. Can anyone tell me how to correct/replace those references to oldservername? Why is the email service insisting on old name? Of course I would like to try it without reinstalling the server. TNX!

  Read the article

• increase performance of virtual machines on the 27" imac

  - by evan

  I'm using a 27" iMac (i7, 8GB RAM) at work and normally run two or three virtual machines at the same time, which hurts the performance of each virtual machine. I've learned on these forums the best way to increase virtual machine performance (aside from RAM) is to have them running on a separate hard drive from the one the OS is on. Of course with the iMac you can only have one hard drive and not even an SAS or solid state drive (well you could probably take it apart and put one in yourself but I wouldn't be permitted to do that). That being said, do you think it would help to run one or more virtual machines from a firewire external drive (or a usb 2.0)? Thanks for your input!

  Read the article

• Postfix "loops back to myself" error on relay to another IP address on same machine

  - by Nic Wolff

  I'm trying to relay all mail for one domain "ourdomain.tld" from Postfix running on port 2525 of one interface to another SMTP server running on port 25 of another interface on the same machine. However, when a message is received for that domain, we're getting a "mail for loops back to myself" error. Below are netstat and postconf, the contents of our /etc/postfix/transport file, and the error that Postfix is logging. (The high bytes of each IP address are XXXed out.) Am I missing something obvious? Thanks - # netstat -ln -A inet Proto Recv-Q Send-Q Local Address Foreign Address State ... tcp 0 0 XXX.XXX.138.209:25 0.0.0.0:* LISTEN tcp 0 0 XXX.XXX.138.210:2525 0.0.0.0:* LISTEN # postconf -d | grep mail_version mail_version = 2.8.4 # postconf -n alias_maps = hash:/etc/aliases allow_mail_to_commands = alias,forward bounce_queue_lifetime = 0 command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 default_privs = nobody default_process_limit = 200 html_directory = no inet_interfaces = XXX.XXX.138.210 local_recipient_maps = local_transport = error:local mail delivery is disabled mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man message_size_limit = 10240000 mydestination = mydomain = ourdomain.tld myhostname = ourdomain.tld mynetworks = XXX.XXX.119.0/24, XXX.XXX.138.0/24, XXX.XXX.136.128/25 myorigin = ourdomain.tld newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /etc/postfix recipient_delimiter = + relay_domains = ourdomain.tld relay_recipient_maps = sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtpd_authorized_verp_clients = $mynetworks smtpd_recipient_limit = 10000 transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 450 # cat /etc/postfix/transport ourdomain.tld relay:[XXX.XXX.138.209]:25 # tail -f /var/log/maillog ... Aug 2 23:58:36 va4 postfix/smtp[9846]: 9858A758404: to=<nicwolff@... >, relay=XXX.XXX.138.209[XXX.XXX.138.209]:25, delay=1.1, delays=0.08/0.01/1/0, dsn=5.4.6, status=bounced (mail for [XXX.XXX.138.209]:25 loops back to myself)

  Read the article

• Can you run Android 2.2 Froyo or 2.3 Gingerbread in a VM?

  - by Josh B

  I came across a how-to guide for running Android 1.7 in a virtual machine (VirtualBox), but 1.7 is old. I haven't been able to find a Android 2.2 or 2.3 image anywhere, does anyone have any ideas on how to virtualize newer Android OS's? Preferably a free virtualization solution like VirtualBox. Here is the link about virtualizing 1.7: http://osxdaily.com/2010/12/14/run-android-using-a-virtual-machine-on-a-mac-or-windows-pc/ They send you to here to download Android disk images: http://virtualboxes.org/images/android-x86/ But I can't find anything newer than 1.7, anyone have any ideas? Is this considered illegal or piracy is that why there are no images available? Thanks for help!

  Read the article

• VPN within a VM to allow for internet access on the host

  - by David Durrant

  I have a network connection (created under Networks and Sharing) that I use to connect to a customer's site. But when I use this to connect to the site, I loose all access to the public internet, and can only access customer specific items. I want to circumvent this issue by creating a VM and then utilizing the VM to connect to the network location and interact within the customer's domain, while leaving my host machine open to the internet. I'm not extremely familiar with networking, but I have a few basic skills. Please let me know if this is possible and what the correct procedures are. I already have a VM created with VirtualBox, and both the host and guest are running Windows 7 x64. I have created duplicate VPNs already, but can only connect successfully on the host machine.

  Read the article

• Quad Core host with hyper-threading, how many processors to configure in VirtualBox?

  - by Anthony

  I have a quad-core i7 processor with hyperthreading (8 logical cores), when I configured a virtual machine to use 8 processors, VirtualBox gave me a warning saying that I only have four cores (which is true) and that this may cause a performance issue. But hyper-threading is a hardware feature, so the OS sees 8 cores and it sends instructions to all 8. What if setting it to 4 caused the VM to use 2 cores (4 threads) instead of 4 simultaneous threads (on all 4 cores)? Does the warning I got take into account that my machine has hyper-threading?

  Read the article

• How to use SSH Public Key with PuTTY to connect to a Linux machine

  - by ysap

  I am trying to set a public SSH key connection from a Windows 7 machine to a Red-Hat Linux machine. The ultimate purpose is to use pscp (PuTTY's version of scp) from the command terminal w/o the need to type password repetitively. Following PuTTY's documentation and other online sources, I used PuTTYgen to generate a key pair. I then copied the generated public key to a ~/.ssh/authorized_keys file on the Linux machine (as far as I can tell, it runs OpenSSH server). To check the connection, I run PuTTY and set the username and private key file in the appropriate places in its GUI. However, when trying to connect using PuTTY's SSH, the connection uses the preset username, but I get an error message of "Server refused our key" and a prompt for the password. I then tried to copy-paste the public key text from PuTTYgen's GUI to the authorized_keys file, but it did not work either. How should I set up a public key connection form Win 7 to Linux? How do I use this with pscp (rather than PuTTY's ssh)?

  Read the article

• Manual NAT on Checkpoint (Redirect all http requests to a local web server)

  - by B. Kulakli

  We have a proxy server in our internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that says "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Tries to open www.google.com Should see web server output on local network Tries another web site on internet Should see web server output on local network Sets up proxy Tries to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), no replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my NAT rule at checkpoint NGX R60 does not include return packets. I definitely need some help.

  Read the article

• Manual NAT on Checkpoint (Redirect all http requests to a local web server)

  - by kulakli

  Hi, We have a proxy server in internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that say "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Trys to open www.google.com Should see web server output on local network Trys another web site on internet Should see web server output on local network Sets up proxy Trys to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), No replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my nat rule at checkpoint NGX R60 does not include return packets. I definitely need some help. Regards, Burak

  Read the article

• Ubuntu 10.04 bind9 local zone include files and apparmor

  - by Gilgongo

  Rather than putting all my zones in one named.conf.local file, I'd like to have them in groups that I can manage as separate files. So, I've tried putting the following into named.conf.local: include "/home/zones/group1.conf"; include "/home/zones/group2.conf"; include "/home/zones/group3.conf"; However, when I restart named, I see "permission denied" errors in the logs. Ubuntu uses apparmor for bind, so I also added the following in /etc/apparmor.d/usr.sbin.named: /home/zones/group1.conf r, /home/zones/group1.conf r, /home/zones/group1.conf r, Now, when I re-start named, all appears to be well. Zones are loaded (I think). However, a day or two later, I see my secondary name server complaining that the primary is telling it that it's not authoritative for those domains. I then have to put all the domains back into the named.conf.local file again. How can I get bind9 to use include files in this way? I don't know much about apparmor, so that may or may not be the issue here, but I've used include files in this way on Debian OK.

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >