Search Results

Search found 32114 results on 1285 pages for 'general development'.

Page 498/1285 | < Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >

• Turn-based Client-Server Card Game - Unicast (TCP) or Multicast (UDP)

  - by LDM91

  I am currently planning to make a card game project where the clients will communicate with the server in a turn-based and synchronous manner using messages sent over sockets. The problem I have is how to handle the following scenario: (Client takes it turn and sends its action to server) Client sends a message telling the server its move for the turn (e.g. plays the card 5 from its hand which needs to placed onto the table) Server receives messages and updates game state (server will hold all game state). Server iterates through a list of connected clients and sends a message to tell of them change in state Clients all refresh to display the state This is all based on using TCP, and looking at it now it seems a bit like the Observer pattern. The reason this seems to be an issue to me is this message doesn't seem to be point-to-point like the others as I want to send it to all the clients, and doesn't seem very efficient sending the same message in that way. I was thinking about using multicasting with UDP as then I could send the message to all the clients, however wouldn't this mean that the clients would in theory be able to message each other? There is of course the synchronous aspect as well, though this could be put on top of the UDP I guess. Basically, I would like to know what would be good practice as this project is really all about learning, and even though it won't be big enough to encounter performance issues from this I would like to consider them anyway. However, please note I am not interested in using message oriented middleware as a solution (I have experience with using MOM and I'm interested in considering other options excluding MOM if TCP sockets is a bad idea!).

  Read the article

• Unity3d web player fails to load textures

  - by José Franco

  I'm having a problem with Unity3d Web Player. I have developed a project and succesfully deployed it in a web app. It works with absolutely no problem on my PC. This app is to be installed on two identical machines. I have installed them in both and it only works properly in one. The issue I have is on a computer it fails to properly load the models and textures, so the game runs but instead of the models I can only see black rectangles on a blue background. It has the same problem with all browsers and I get no errors either by the player or by JavaScript. The only difference between these computers is that one that has the problem is running on Windows 8.1 and the other one on Windows 8 only. Could this be the cause of the issue? It works fine on my computer with Windows 8.1. However both of the other computers have specs that are significantly lower than mine. I have already searched everywhere and it seems that it has to do with the individual games, however I think it may have to do with the computer itself because it runs properly in the other two. The specs on the computes I'm installing the app on are as follows: Intel Celeron 1.40 GHz, 2GB RAM, Intel HD Graphics If anybody could point me in the right direction I would be very grateful I forgot to mention, I'm running Unity Web player 4.3.5 and the version on the other two computers is 4.5.0

  Read the article

• Managing constant buffers without FX interface

  - by xcrypt

  I am aware that there is a sample on working without FX in the samplebrowser, and I already checked that one. However, some questions arise: In the sample: D3DXMATRIXA16 mWorldViewProj; D3DXMATRIXA16 mWorld; D3DXMATRIXA16 mView; D3DXMATRIXA16 mProj; mWorld = g_World; mView = g_View; mProj = g_Projection; mWorldViewProj = mWorld * mView * mProj; VS_CONSTANT_BUFFER* pConstData; g_pConstantBuffer10->Map( D3D10_MAP_WRITE_DISCARD, NULL, ( void** )&pConstData ); pConstData->mWorldViewProj = mWorldViewProj; pConstData->fTime = fBoundedTime; g_pConstantBuffer10->Unmap(); They are copying their D3DXMATRIX'es to D3DXMATRIXA16. Checked on msdn, these new matrices are 16 byte aligned and optimised for intel pentium 4. So as my first question: 1) Is it necessary to copy matrices to D3DXMATRIXA16 before sending them to the constant buffer? And if no, why don't we just use D3DXMATRIXA16 all the time? I have another question about managing multiple constant buffers within one shader. Suppose that, within your shader, you have multiple constant buffers that need to be updated at different times: cbuffer cbNeverChanges { matrix View; }; cbuffer cbChangeOnResize { matrix Projection; }; cbuffer cbChangesEveryFrame { matrix World; float4 vMeshColor; }; Then how would I set these buffers all at different times? g_pd3dDevice->VSSetConstantBuffers( 0, 1, &g_pConstantBuffer10 ); gives me the possibility to set multiple buffers, but that is within one call. 2) Is that okay even if my constant buffers are updated at different times? And do I suppose I have to make sure the constantbuffers are in the same position in the array as the order they appear in the shader?

  Read the article

• Simpler alternative to AngelScript

  - by Vee

  I want to give players the ability to create and share bullet patterns for a shoot'em up. The pattern scripts should have all the common programming stuff like loops, if/else, variables, and so on. But in the end, I just want them to call a "spawn bullet at X, Y with Z angle and A speed" in the C++ game. To spawn a circle of bullets, the user should only have to write a script with a for loop that goes from 0 to 360 and calls the spawn bullet function on every iteration. I tried integrating AngelScript, but I am getting nowhere - it looks way to complex for a simple task like this one. Is there an easy to integrate library that can solve my problem? Thanks.

  Read the article

• Creating smooth lighting transitions using tiles in HTML5/JavaScript game

  - by user12098

  I am trying to implement a lighting effect in an HTML5/JavaScript game using tile replacement. What I have now is kind of working, but the transitions do not look smooth/natural enough as the light source moves around. Here's where I am now: Right now I have a background map that has a light/shadow spectrum PNG tilesheet applied to it - going from darkest tile to completely transparent. By default the darkest tile is drawn across the entire level on launch, covering all other layers etc. I am using my predetermined tile sizes (40 x 40px) to calculate the position of each tile and store its x and y coordinates in an array. I am then spawning a transparent 40 x 40px "grid block" entity at each position in the array The engine I'm using (ImpactJS) then allows me to calculate the distance from my light source entity to every instance of this grid block entity. I can then replace the tile underneath each of those grid block tiles with a tile of the appropriate transparency. Currently I'm doing the calculation like this in each instance of the grid block entity that is spawned on the map: var dist = this.distanceTo( ig.game.player ); var percentage = 100 * dist / 960; if (percentage < 2) { // Spawns tile 64 of the shadow spectrum tilesheet at the specified position ig.game.backgroundMaps[2].setTile( this.pos.x, this.pos.y, 64 ); } else if (percentage < 4) { ig.game.backgroundMaps[2].setTile( this.pos.x, this.pos.y, 63 ); } else if (percentage < 6) { ig.game.backgroundMaps[2].setTile( this.pos.x, this.pos.y, 62 ); } // etc... (sorry about the weird spacing, I still haven't gotten the hang of pasting code in here properly) The problem is that like I said, this type of calculation does not make the light source look very natural. Tile switching looks too sharp whereas ideally they would fade in and out smoothly using the spectrum tilesheet (I copied the tilesheet from another game that manages to do this, so I know it's not a problem with the tile shades. I'm just not sure how the other game is doing it). I'm thinking that perhaps my method of using percentages to switch out tiles could be replaced with a better/more dynamic proximity forumla of some sort that would allow for smoother transitions? Might anyone have any ideas for what I can do to improve the visuals here, or a better way of calculating proximity with the information I'm collecting about each tile? (PS: I'm reposting this from Stack Overflow at someone's suggestion, sorry about the duplicate!)

  Read the article

• OpenGL 3 and the Radeon HD 4850x2

  - by rotard

  A while ago, I picked up a copy of the OpenGL SuperBible fifth edition and slowly and painfully started teaching myself OpenGL the 3.3 way, after having been used to the 1.0 way from school way back when. Making things more challenging, I am primarily a .NET developer, so I was working in Mono with the OpenTK OpenGL wrapper. On my laptop, I put together a program that let the user walk around a simple landscape using a couple shaders that implemented per-vertex coloring and lighting and texture mapping. Everything was working brilliantly until I ran the same program on my desktop. Disaster! Nothing would render! I have chopped my program down to the point where the camera sits near the origin, pointing at the origin, and renders a square (technically, a triangle fan). The quad renders perfectly on my laptop, coloring, lighting, texturing and all, but the desktop renders a small distorted non-square quadrilateral that is colored incorrectly, not affected by the lights, and not textured. I suspect the graphics card is at fault, because I get the same result whether I am booted into Ubuntu 10.10 or Win XP. I did find that if I pare the vertex shader down to ONLY outputting the positional data and the fragment shader to ONLY outputting a solid color (white) the quad renders correctly. But as SOON as I start passing in color data (whether or not I use it in the fragment shader) the output from the vertex shader is distorted again. The shaders follow. I left the pre-existing code in, but commented out so you can get an idea what I was trying to do. I'm a noob at glsl so the code could probably be a lot better. My laptop is an old lenovo T61p with a Centrino (Core 2) Duo and an nVidia Quadro graphics card running Ubuntu 10.10 My desktop has an i7 with a Radeon HD 4850 x2 (single card, dual GPU) from Saphire dual booting into Ubuntu 10.10 and Windows XP. The problem occurs in both XP and Ubuntu. Can anyone see something wrong that I am missing? What is "special" about my HD 4850x2? string vertexShaderSource = @" #version 330 precision highp float; uniform mat4 projection_matrix; uniform mat4 modelview_matrix; //uniform mat4 normal_matrix; //uniform mat4 cmv_matrix; //Camera modelview. Light sources are transformed by this matrix. //uniform vec3 ambient_color; //uniform vec3 diffuse_color; //uniform vec3 diffuse_direction; in vec4 in_position; in vec4 in_color; //in vec3 in_normal; //in vec3 in_tex_coords; out vec4 varyingColor; //out vec3 varyingTexCoords; void main(void) { //Get surface normal in eye coordinates //vec4 vEyeNormal = normal_matrix * vec4(in_normal, 0); //Get vertex position in eye coordinates //vec4 vPosition4 = modelview_matrix * vec4(in_position, 0); //vec3 vPosition3 = vPosition4.xyz / vPosition4.w; //Get vector to light source in eye coordinates //vec3 lightVecNormalized = normalize(diffuse_direction); //vec3 vLightDir = normalize((cmv_matrix * vec4(lightVecNormalized, 0)).xyz); //Dot product gives us diffuse intensity //float diff = max(0.0, dot(vEyeNormal.xyz, vLightDir.xyz)); //Multiply intensity by diffuse color, force alpha to 1.0 //varyingColor.xyz = in_color * diff * diffuse_color.xyz; varyingColor = in_color; //varyingTexCoords = in_tex_coords; gl_Position = projection_matrix * modelview_matrix * in_position; }"; string fragmentShaderSource = @" #version 330 //#extension GL_EXT_gpu_shader4 : enable precision highp float; //uniform sampler2DArray colorMap; //in vec4 varyingColor; //in vec3 varyingTexCoords; out vec4 out_frag_color; void main(void) { out_frag_color = vec4(1,1,1,1); //out_frag_color = varyingColor; //out_frag_color = vec4(varyingColor, 1) * texture(colorMap, varyingTexCoords.st); //out_frag_color = vec4(varyingColor, 1) * texture(colorMap, vec3(varyingTexCoords.st, 0)); //out_frag_color = vec4(varyingColor, 1) * texture2DArray(colorMap, varyingTexCoords); }"; Note that in this code the color data is accepted but not actually used. The geometry is outputted the same (wrong) whether the fragment shader uses varyingColor or not. Only if I comment out the line varyingColor = in_color; does the geometry output correctly. Originally the shaders took in vec3 inputs, I only modified them to take vec4s while troubleshooting.

  Read the article

• Drawing different per-pixel data on the screen

  - by Amir Eldor

  I want to draw different per-pixel data on the screen, where each pixel has a specific value according to my needs. An example may be a random noise pattern where each pixel is randomly generated. I'm not sure what is the correct and fastest way to do this. Locking a texture/surface and manipulating the raw pixel data? How is this done in modern graphics programming? I'm currently trying to do this in Pygame but realized I will face the same problem if I go for C/SDL or OpenGL/DirectX.

  Read the article

• Proportional speed movement between mouse and cube

  - by user1350772

  Hi i´m trying to move a cube with the freeglut mouse "glutMotionFunc(processMouseActiveMotion)" callback, my problem is that the movement is not proportional between the mouse speed movement and the cube movement. MouseButton function: #define MOVE_STEP 0.04 float g_x=0.0f; glutMouseFunc(MouseButton); glutMotionFunc(processMouseActiveMotion); void MouseButton(int button, int state, int x, int y){ if(button == GLUT_LEFT_BUTTON && state== GLUT_DOWN){ initial_x=x; } } When the left button gets clicked the x cordinate is stored in initial_x variable. void processMouseActiveMotion(int x,int y){ if(x>initial_x){ g_x-= MOVE_STEP; }else{ g_x+= MOVE_STEP; } initial_x=x; } When I move the mouse I look in which way it moves comparing the mouse new x coordinate with the initial_x variable, if xinitial_x the cube moves to the right, if not it moves to the left. Any idea how can i move the cube according to the mouse movement speed? Thanks EDIT 1 The idea is that when you click on any point of the screen and you drag to the left/right the cube moves proportionally of the mouse mouvement speed.

  Read the article

• How to make it so units don't stack up in one location?

  - by Daggio

  So I'm making a game in AS3, it's a strategy DotA-like game (for flash game equivalent, there's UDE) so far so good, I have the A* pathfinding algorithm all sorted out and the minion units move to the desired location as I want them to be. The problem a rise when a unit stops in a node that has already occupied by another friendly unit. Both (or more than two) of them stacks up in one location, it looks like they're one unit. I want to add collision detection so when they collide they don't stack up together. But now they stop when they collide on they way to a node. This isn't good because they won't move at all midway (they won't respond to enemy attacks like that). I've added a deltatime so they only stopped for 2 seconds before they move again to their designated designation. This moves them again but they flicker. Not how I want it. So, like the title said. How to make more than one units don't stack up in a node? And if possible, how to make them not flicker while moving (it's good if they can tell other friendly units on the way and avoid them accordingly)?

  Read the article

• Why doesn't my texture display with this GLSL shader?

  - by Chewy Gumball

  I am trying to display a DXT1 compressed texture on a quad using a VBO and shaders, but I have been unable to get it working. All I get is a black square. I know my texture is uploaded properly because when I use immediate mode without shaders the texture displays fine but I will include that part just in case. Also, when I change the gl_FragColor to something like vec4 (0.0, 1.0, 1.0, 1.0) then I get a nice blue quad so I know that my shader is able to set the colour. It appears to be either the texture is not being bound correctly in the shader or the texture coordinates are not being picked up. However, I can't find the error! What am I doing wrong? I am using OpenTK in C# (not xna). Vertex Shader: void main() { gl_TexCoord[0] = gl_MultiTexCoord0; // Set the position of the current vertex gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex; } Fragment Shader: uniform sampler2D diffuseTexture; void main() { // Set the output color of our current pixel gl_FragColor = texture2D(diffuseTexture, gl_TexCoord[0].st); //gl_FragColor = vec4 (0.0,1.0,1.0,1.0); } Drawing Code: int vb, eb; GL.GenBuffers(1, out vb); GL.GenBuffers(1, out eb); // Position Texture float[] verts = { 0.1f, 0.1f, 0.0f, 0.0f, 0.0f, 1.9f, 0.1f, 0.0f, 1.0f, 0.0f, 1.9f, 1.9f, 0.0f, 1.0f, 1.0f, 0.1f, 1.9f, 0.0f, 0.0f, 1.0f }; uint[] indices = { 0, 1, 2, 0, 2, 3 }; //upload data to the VBO GL.BindBuffer(BufferTarget.ArrayBuffer, vb); GL.BindBuffer(BufferTarget.ElementArrayBuffer, eb); GL.BufferData(BufferTarget.ArrayBuffer, (IntPtr)(verts.Length * sizeof(float)), verts, BufferUsageHint.StaticDraw); GL.BufferData(BufferTarget.ElementArrayBuffer, (IntPtr)(indices.Length * sizeof(uint)), indices, BufferUsageHint.StaticDraw); //Upload texture int buffer = GL.GenTexture(); GL.BindTexture(TextureTarget.Texture2D, buffer); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapS, (float)TextureWrapMode.Repeat); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapT, (float)TextureWrapMode.Repeat); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMagFilter, (float)TextureMagFilter.Linear); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMinFilter, (float)TextureMinFilter.Linear); GL.TexEnv(TextureEnvTarget.TextureEnv, TextureEnvParameter.TextureEnvMode, (float)TextureEnvMode.Modulate); GL.CompressedTexImage2D(TextureTarget.Texture2D, 0, texture.format, texture.width, texture.height, 0, texture.data.Length, texture.data); //Draw GL.UseProgram(shaderProgram); GL.EnableClientState(ArrayCap.VertexArray); GL.EnableClientState(ArrayCap.TextureCoordArray); GL.VertexPointer(3, VertexPointerType.Float, 5 * sizeof(float), 0); GL.TexCoordPointer(2, TexCoordPointerType.Float, 5 * sizeof(float), 3); GL.ActiveTexture(TextureUnit.Texture0); GL.Uniform1(GL.GetUniformLocation(shaderProgram, "diffuseTexture"), 0); GL.DrawElements(BeginMode.Triangles, indices.Length, DrawElementsType.UnsignedInt, 0);

  Read the article

• Issues with shooting in a HTML5 platformer game

  - by fnx

  I'm coding a 2D sidescroller using only JavaScript and HTML5 canvas, and in my game I have two problems with shooting: 1) Player shoots continous stream of bullets. I want that player can shoot only a single bullet even though the shoot-button is being held down. 2) Also, I get an error "Uncaught TypeError: Cannot call method 'draw' of undefined" when all the bullets are removed. My shooting code goes like this: When player shoots, I do game.bullets.push(new Bullet(this, this.scale)); and after that: function Bullet(source, dir) { this.id = "bullet"; this.width = 10; this.height = 3; this.dir = dir; if (this.dir == 1) { this.x = source.x + source.width - 5; this.y = source.y + 16; } if (this.dir == -1) { this.x = source.x; this.y = source.y + 16; } } Bullet.prototype.update = function() { if (this.dir == 1) this.x += 8; if (this.dir == -1) this.x -= 8; for (var i in game.enemies) { checkCollisions(this, game.enemies[i]); } // Check if bullet leaves the viewport if (this.x < game.viewX * 32 || this.x > (game.viewX + game.tilesX) * 32) { removeFromList(game.bullets, this); } } Bullet.prototype.draw = function() { // bullet flipping uses orientation of the player var posX = game.player.scale == 1 ? this.x : (this.x + this.width) * -1; game.ctx.scale(game.player.scale, 1); game.ctx.drawImage(gameData.getGfx("bullet"), posX, this.y); } I handle removing with this function: function removeFromList(list, object) { for (i in list) { if (object == list[i]) { list.splice(i, 1); break; } } } And finally, in the main game loop I have this: for (var i in game.bullets) { game.bullets[i].update(); game.bullets[i].draw(); } I have tried adding if (game.bullets.length > 0) to the main game loop before the above draw&update calls, but I still get the same error.

  Read the article

• How to derive euler angles from matrix or quaternion?

  - by KlashnikovKid

  Currently working on steering behavior for my AI and just hit a little mathematical bump. I'm in the process of writing an align function, which basically tries to match the agent's orientation with a target orientation. I've got a good source material for implementing this behavior but it uses euler angles to calculate the rotational delta, acceleration, and so on. This is nice, however I store orientation as a quaternion and the math library I'm using doesn't provide any functionality for deriving the euler angles. But if it helps I also have rotational matrices at my disposal too. What would be the best way to decompose the quaternion or rotational matrix to get the euler information? I found one source for decomposing the matrix, but I'm not quite getting the correct results. I'm thinking it may be a difference of column/row ordering of my matrices but then again, math isn't my strong point. http://nghiaho.com/?page_id=846

  Read the article

• How should I interpret these DirectX Caps Viewer values?

  - by tobi

  Briefly asking - what do the nodes mean and what the difference is between them in DirectX Caps Viewer? DXGI Devices Direct3D9 Devices DirectDraw Devices The most interesting for me is 1 vs 2. In the Direct3D9 Devices under HAL node I can see that my GeForce 8800GT supports PixelShaderVersion 3.0. However, under DXGI Devices I have DX 10, DX 10.1 and DX 11 having Shader model 4.0 (actually why DX 11? My card is not compatible with DX 11). I am implementing a DX 11 application (including d3d11.h) with shaders compiled in 4.0 version, so I can clearly see that 4.0 is supported. What is the difference between 1 and 2? Could you give me some theory behind the nodes?

  Read the article

• Procedurally generated 2d terrain for side scroller on Sega Genesis hardware?

  - by DJCouchyCouch

  I'm working on the Sega Genesis that has a 8mhz Motorola 68000 CPU. Any ideas on how to generate fast and decent 2d tile terrain for a side scroller in real time? The game would generate new columns or rows depending on the direction the player is scrolling in. The generation would have to be deterministic. The same seed value would generate the same terrain. I'm looking for algorithms that would satisfy the memory and CPU constraints of the hardware.

  Read the article

• CCUserDefault, iOS/Android and game updates

  - by Luke

  My game uses cocos2d-x and will be published on iOS platform first, later on Android. I save a lot of things with CCUserDefault (scores, which level was completed, number of coins taken, etc...). But now I have a big doubt. What will happen when the game will receive its first update? CCUserDefault uses an XML file stored somewhere in the app storage space. This file is created and retained until one uninstalls the app. I am wondering what happens when the app is updated. Will the old XML file be maintained? Because if not, how should I handle app updates (updates in the sense that 2, 3 or more new level packages will be added, but the informations about the old ones, like scores, which level was finished and which not, number of coins, etc., need absolutely not to be lost)?

  Read the article

• Issues glVertexAttribPointer last 2 parameters?

  - by NoobScratcher

  Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

  Read the article

• ConsumeStructuredBuffer, what am I doing wrong?

  - by John

  I'm trying to implement the 3rd exercise in chapter 12 of Introduction to 3D Game Programming with DirectX 11, that is: Implement a Compute Shader to calculate the length of 64 vectors. Previous exercises ask you to do the same with typed buffers and regular structured buffers and I had no problems with them. For what I've read, [Consume|Append]StructuredBuffers are bound to the pipeline using UnorderedAccessViews (as long as they use the D3D11_BUFFER_UAV_FLAG_APPEND, and the buffers have both D3D11_BIND_SHADER_RESOURCE and D3D11_BIND_UNORDERED_ACCESS bind flags). Problem is: my AppendStructuredBuffer works, since I can append data to it and retrieve it from the application to write to a results file, but the ConsumeStructuredBuffer always returns zeroed data. Data is in the buffer, since if I change the UAV to a ShaderResourceView and to a StructuredBuffer in the HLSL side it works. I don't know what I am missing: Should I initialize the ConsumeStructuredBuffer on the GPU, or can I do it when I create the buffer (as I amb currently doing). Is it OK to bind the buffer with a UAV as described above? Do I need to bind it as a ShaderResourceView somehow? Maybe I am missing some step? This is the declaration of buffers in the Compute Shader: struct Data { float3 v; }; struct Result { float l; }; ConsumeStructuredBuffer<Data> gInput; AppendStructuredBuffer<Result> gOutput; And here the creation of the buffer and UAV for input data: D3D11_BUFFER_DESC inputDesc; inputDesc.Usage = D3D11_USAGE_DEFAULT; inputDesc.ByteWidth = sizeof(Data) * mNumElements; inputDesc.BindFlags = D3D11_BIND_SHADER_RESOURCE | D3D11_BIND_UNORDERED_ACCESS; inputDesc.CPUAccessFlags = 0; inputDesc.StructureByteStride = sizeof(Data); inputDesc.MiscFlags = D3D11_RESOURCE_MISC_BUFFER_STRUCTURED; D3D11_SUBRESOURCE_DATA vinitData; vinitData.pSysMem = &data[0]; HR(md3dDevice->CreateBuffer(&inputDesc, &vinitData, &mInputBuffer)); D3D11_UNORDERED_ACCESS_VIEW_DESC uavDesc; uavDesc.Format = DXGI_FORMAT_UNKNOWN; uavDesc.ViewDimension = D3D11_UAV_DIMENSION_BUFFER; uavDesc.Buffer.FirstElement = 0; uavDesc.Buffer.Flags = D3D11_BUFFER_UAV_FLAG_APPEND; uavDesc.Buffer.NumElements = mNumElements; md3dDevice->CreateUnorderedAccessView(mInputBuffer, &uavDesc, &mInputUAV); Initial data is an array of Data structs, which contain a XMFLOAT3 with random data. I bind the UAV to the shader using the Effects framework: ID3DX11EffectUnorderedAccessViewVariable* Input = mFX->GetVariableByName("gInput")->AsUnorderedAccessView(); Input->SetUnorderedAccessView(uav); // uav is mInputUAV Any ideas? Thank you.

  Read the article

• Interpolating between two networked states?

  - by Vaughan Hilts

  I have many entities on the client side that are simulated (their velocities are added to their positions on a per frame basis) and I let them dead reckon themselves. They send updates about where they were last seen and their velocity changes. This works great and other players see this work find. However, after a while these players begin to desync after some time. This is because of latency. I'd like to know how I can interpolate between states so they appear to be in the correct position. I know where the player was LAST seen and their current velocity but interpolating to the last seen state causes the player to actually move -backwards-. I could not use velocity at all for other clients and simply 'lerp' them towards the appropriate direction but I feel this would cause jaggy movement. What are the alternatives?

  Read the article

• Making AI jump on a spot effectively

  - by Pasquale Sada

  How to calculate, in 3D environment, the closest point, from which an AI character can jump onto a platform? Setup I have an initial velocity V(Vx,Vy,VZ) and a spot where the character stands still at S(Sx,Sy,Sz). What I'm trying to achieve is a successful jump on a spot E(Ex,Ey,Ez) where you have clicked on(only lower or higher spot, because I've in place a simple steering behavior for even terrains). There are no obstacles around. I've implemented a formula that can make him jump in a precise way on a spot but you need to declare an angle: the problem arise when the selected spot is straight above your head. It' pretty lame that the char hang there and can reach a thing that is 1cm above is head. I'll share the code I'm using: Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 *a)); return vel * dir.normalized; Ended up using the lowest angle (20 degree) and checking for collision on the trajectory. If found any increase the angle. Here some code (to improve the code maybe must stop the check at the highest point of the curve): Vector3 BallisticVel(Vector3 target, float angle) { Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 * a)); return vel * dir.normalized; } Vector3 TrajectoryPoint(Vector3 startingPosition, Vector3 startingVelocity, float n ) { float t = 1/60 ; // seconds per time step Vector3 stepVelocity = t * startingVelocity; // m/s Vector3 stepGravity = t * t * Physics.gravity; // m/s/s return startingPosition + n * stepVelocity + 0.5f * (n*n+n) * stepGravity; } bool CheckTrajectory(Vector3 startingPosition,Vector3 target, float angle_jump) { Debug.Log("checking"); if(angle_jump < 80f) { Debug.Log("if"); Vector3 startingVelocity = BallisticVel(target, angle_jump); for (int i = 0; i < 180; i++) { //Debug.Log(i); Vector3 trajectoryPosition = TrajectoryPoint( startingPosition, startingVelocity, i ); if(Physics.Raycast(trajectoryPosition,Vector3.forward,safeDistance)) { angle_jump += 10; break; // restart loop with the new angle } else continue; } return true; JumpVelocity = BallisticVel(target, angle_jump); } return false; }

  Read the article

• How to make the Angry Birds "shot arch" dotted line? [duplicate]

  - by unexpected62

  This question already has an answer here: Show path of a body of where it should go after linear impulse is applied 2 answers I am making a game that includes 2D projectile flight paths like that of Angry Birds. Angry Birds employs the notion that a previous shot is shown with a dotted line "arch" showing the player where that last shot went. I think recording that data is simple enough once a shot is fired, but in my game, I want to show it preemptively, ie: before the shot. How would I go about calculating this dotted line? The other caveat is I have wind in my game. How can you determine a projectile preemptively when wind will affect it too? This seems like a pretty tough problem. My wind right now just applies a constant force every step of animation in the direction of the wind flow. I'm using Box2D and AndEngine if it matters.

  Read the article

• Hidden Loading with UDK

  - by CyrusFiredawn

  I was wondering, how would I go about creating hidden loading scenes with UDK? For example, a character walks in to an elevator, the elevator fakes movement, whilst the previous floor is destroyed and the next floor is loaded on top. I assume it's possible with UDK, since it's supposedly rather flexible, but I've never used UDK before (I decided to ask this question first to save me learning it all, finding out it isn't possible, then giving up). So yeah, is hiding the loading process possible? And if so, how would I go about doing it?

  Read the article

• Calculating vertex normals on the GPU

  - by Etan

  I have some height-map sampled on a regular grid stored in an array. Now, I want to use the normals on the sampled vertices for some smoothing algorithm. The way I'm currently doing it is as follows: For each vertex, generate triangles to all it's neighbours. This results in eight neighbours when using the 1-neighbourhood for all vertices except at the borders. +---+---+ ¦ \ ¦ / ¦ +---o---+ ¦ / ¦ \ ¦ +---+---+ For each adjacent triangle, calculate it's normal by taking the cross product between the two distances. As the triangles all have the same size when projected on the xy-plane, I simply average over all eight normals then and store it for this vertex. However, as my data grows larger, this approach takes too much time and I would prefer doing it on the GPU in a shader code. Is there an easy method, maybe if I could store my height-map as a texture?

  Read the article

• Camera movement and threshold not working

  - by irish guy mcconagheh

  I have a platformer that is in progress, part of this has a camera which I only want to move when the character moves out of a certain threshold, to try to accomplish this I have the following if statement: if(((Mathf.Abs(target.transform.position.x))-(Mathf.Abs(transform.position.x)))>thres){ x = moveTo(transform.position.x, target.position.x, trackSpeed); } in unity/c#. In pseudocode it means if((absolute value of player x) - (absolute value of camera x) is greater than the threshold){ move { however this does not seem to work correctly. it appears to work for the first couple of times the threshold is reached, however the distance between the camera and the player has to increase every time for the camera to move. I do not believe the movement of the camera is the problem, however the code for it is as follows: private float moveTo(float n, float target, float accel) { if (n == target) { return n; } else { float dir = Mathf.Sign(target - n); n += accel * Time.deltaTime * dir; return (dir == Mathf.Sign(target-n))? n: target; } } }

  Read the article

• Unity3D - Android pause screen - double click issue

  - by user3666251

  I made a pause script for the game im developing for android. I added the script to the GUITexture I created and placed on the top right side of the screen.The issue stands at the part where if the player clicks the pause button then clicks resume then he wants to pause the game again.When he clicks pause the second time the buttons dont show up unless he clicks again. This is the script : #pragma strict var paused = false; var isButtonVisible : boolean = true; function OnMouseDown(){ this.paused = !this.paused; Time.timeScale = 0; isButtonVisible = true; } function OnGUI(){ if ( isButtonVisible ) { if(this.paused){ if (GUI.Button(Rect(Screen.width/2-100,Screen.height/2+3,200,50),"Restart")){ Application.LoadLevel(Application.loadedLevel); Time.timeScale = 1; isButtonVisible = false; } if (GUI.Button(Rect(Screen.width/2-100,Screen.height/2-50,200,50),"Resume")){ Time.timeScale = 1; isButtonVisible = false; } // Insert the rest of the pause menu logic if (GUI.Button(Rect(Screen.width/2-100,Screen.height/2+56,200,50),"Main Menu")){ Application.LoadLevel ("MainMenu"); isButtonVisible = false; Time.timeScale = 1; } } } } Thank you.

  Read the article

• Sprite transparency not effected libGDX

  - by Aon GoltzCrank

  I am making a game using libGDX and Tween Universal Engine. My problem is as follows: I have 2 screens so fars, a splash screen with the logo, and a second one which is the main menu. In the splash screen I use a SpriteBatch and a Sprite with the Texture of the image I want (which goes through some scaling.) Now I use the Tween engine, along with a created SpriteAccessor to control the alpha of the sprite. I fade the picture in, then fade it out, then change it to the next screen. In the next screen I have a single sprite, and a single, 3 slot, sprite array. In this screen I also use the tween engine, I fade the single sprite into the screen (it's the background image) then I try to, using the same method, (Tween.to) to change the alpah of the sprite array (each sprite by itself.), I first set it to 0 using Tween.set, then using the method I change it. This didn't work, after some tests I tried setting the alpha of a single sprite from the array to 0, and that didn't work. It's like the program is ignoring the alpha value, I even printed out the alpha value, it saying 0, but the sprite is visible. How can I fix this, or why might it be caused?

  Read the article

< Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >