Search Results

Search found 27800 results on 1112 pages for 'state machine'.

Page 52/1112 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• Connecting to server from remote machine

  - by Jannat Arora

  I wish to connect my machine to a server in some other city. For doing the same I am using the following command: mstsc -v ip_address_of_server remote desktop can't connect to remote computer for one of these reasons: 1) Remote access to server is not enabled. 2) Remote computer is turned off 3) Remote computer is not available on network. Make sure remote computer is turned on and connected to the network, and that remote access is enabled. As per previous posts I need to turn off my client computers firewall..which I have...but still it gives me the same message. Can someone please please help me out...so as to how i may resolve this?? I am really new to networking, etc. Also when i am pinging: ping ip_address_of server I am getting the following response: Reply from ip_address_of_server: destination host unreachable Also I did try on ubuntu with rdesktop...still its not been able to connect with it. Also i know there are other people who are able to connect their machines with the server remotely. So i guess its not working for me only. Also when I accessed the same machine through LAN I was able to do so.

  Read the article

• Lingering tcp connection in LISTEN state

  - by Silvio Donnini

  My java application can sometimes be killed by an external script. This can be done either with SIGTERM or with SIGKILL. The application is a server which receives many connections per second, and it can be killed while trying to serve them. I would like to restart the application whenever it's killed, so I have prepared a script for that purpose. The problem is that, once the app has been killed, the new application instance can't bind to the port used by the previous instance, because the "Address is already in use". The previous instance's process has been definitely terminated, anyway the offending listening port is still there, but it is assigned to bash (or sh on other machines). Obviouly, my goal is to restart the application and let it bind successfully to the previous address. I've tried waiting more than 200 seconds before restarting to no avail, anyway I can't afford to wait that much. I've encountered this problem on all the machines I've ran the application (which is a jetty server with java 1.6). Any suggestion is appreciated, thanks, Silvio

  Read the article

• APC switched rack PDU: Startup outlet state

  - by Ian Gregory

  I have an APC Switched Rack PDU powering a number of servers in a remote datacentre. After a recent power outage, I noticed that the outlets did not automatically default to the On status once power was restored. Having reviewed the Web UI, I cannot find this option. I'm not certain of the model number (it doesn't appear to be visible in the Web UI), but I think it's this one. Is it possible to configure these PDU units to automatically power outlets after a cold start?

  Read the article

• can not connect to SQL running on amazon ec2 machine

  - by njj56

  I am using SQL managment studio 2008 running on an Amazon EC2 machine. I am unable to connect to the database in my asp.net application. The EC2 instance has been set to accept connections over the SQL port. I am also able to remote the machine as well as view websites hosted on the server. Listed below is part of the connection string relating to this instance. When the program is ran and this connection string is called, it returns tcp error 0 - no return response. it just times out. <add name="ProjectServer" connectionString="Data Source=*IP ADDRESS HERE*,1433;Initial Catalog=*Catalog Name*;User ID=IP-0A6ED514\Administrator;"/> I removed the ip and the catalog name for the example, but I am sure they are correct. The only thing that I could think may cause an error, is the differences in names between the user id and the server name - the server name is ip-0A6ED514\sharepoint but the user name is ip-0A6ED514\administrator when I log into the sql server manager on the EC2 instance. A password is not used. Not sure if I would need to leave in a blank string for password - also not sure if the difference between server name and user id to log in makes a difference. Any help is appreciated. Thank you. update - when this connection string is used with out the port, i get tcp provider error 40 - when the port is in there, i get error 0 edit- the sql server is using windows authentication - does this make a difference? Usually I always use SQL server authentication

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• iis7 large worker process request queue creating process blocking aspnet.config & machine.config amended (bottleneck)

  - by scott_lotus

  ASP.net 2.0 app .net 2.0 framework IIS7 I am seeing a large queue of "requests" appear under the "worker process" option. State recorded appear to be Authenticate Request and Execute Request Handles more than anything else. I have amended aspnet.config in C:\Windows\Microsoft.NET\Framework64\v2.0.50727 (32 bit path and 64 bit path) to include: maxConcurrentRequestsPerCPU="50000" maxConcurrentThreadsPerCPU="0" requestQueueLimit="50000" I have amended machine.config in C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG (32 bit and 64 bit path) to include: autoConfig="true" maxIoThreads="100" maxWorkerThreads="100" minIoThreads="50" minWorkerThreads="50" minFreeThreads="176" minLocalRequestFreeThreads="152" Still i get the issue. The issue manifestes itself as a large number of processes in the Worker Process queue. Number of current connections to the website display 500 when this issue occurs. I dont think i have seen concurrent connections over 500 without this issue occurring. Web application slows as the request block. Refreshing the app pool resolves for a while (as expected) as the load is spread between the two pools. Application pool in question FIXED REQUEST have been set to refresh on 50000. Thank you for any help. Scott quick edit to say hmm, my develeopers are telling me the project was built with .net 3.5 framework. Looking at C:\Windows\Microsoft.NET\Framework64\v3.5 there does not appear to be a ASPNET.CONFIG or a MACHINE.CONFIG .... is there a 3.5 equivalent ? after a little searching apparenetly 3.5 uses the 2.0 framework files that 3.5 is missing. So back to the original question , where is my bottleneck ?

  Read the article

• Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

  - by Carl Lindberg

  I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

  Read the article

• Easily recreate a server's "state" [closed]

  - by Brandon Wamboldt

  I want the ability to setup new servers for dev/testing/prod very easily. The reasons for being able to setup a new dev VM is obvious, but for prod my concern is adding a new production server/migrating to a new server. I assume a traditional backup solution won't work as hardware may be different so the binaries/config might be different. I want to get experience with puppet anyways, so I was thinking about creating a manifest that would setup my users, install Postgres, Nginx, PHP-FPM, etc, and configure them the way I specify. Then I could install puppet on a new server, copy down my manifest and apply it locally. This would make keeping my server configs in sync easier too. Is there a better approach I'm not aware of, and does my approach have any pitfalls?

  Read the article

• Web-Based Virtual Machine Manager

  - by Pete Redhead

  I am looking for a web-based virtual machine manager, which will work on our Ubuntu server. Ideally, I need something that our team can use to create a VM, test builds and packaging and then either restore to the original state or delete. libvirt has an API, but I can't find any web apps using it. Thanks

  Read the article

• Long access time for static web page on virtual machine

  - by Karol

  My setup Windows 7 on workstation that I use at work (with domain) and home (no domain) Virtual machine (VMWare) that runs Arch Linux (I will call it just "Linux") with network interface in bridged mode. Linux serves web pages with Nginx. IP address of Linux machine is 192.168.0.16 and is added to C:\windows\system32\drivers\etc\hosts: 192.168.0.16 bridged bri IP address of Windows workstation is added to /etc/hosts: 192.168.0.10 workstation I can add more details to my setup description (I am not sure what is relevant). The question Often (but not always) it takes long time for a web browser (Firefox) to open static web page served by Linux. I am sure it is not a performance issue. To be more specific: it takes about ~20 seconds to resolve(?) the address http://bridged for a web browser. Additionally I have just installed samba service and noticed similar problem, so it is not specific to browser & http. Initial access for samba shares also takes long time.

  Read the article

• Dell XPS 17 Laptop USB SS Ports don't work until machine rebooted

  - by Matt

  I have a new Dell XPS 17 laptop and have an issue that the two USB SS ports on the rear of the machine are not recognising anything when I start-up. Have tried mouse, keyboard, headset, USB display. If I plug a USB hub in the power light on the hub lights (presume this is hard-wired) but a mouse plugged into the hub does not light up. If I restart the pc the ports work fine. Also the other two USB ports work fine all the time. I have switched off the power saving setting on the device manager (Power managementAllow the computer to turn off this device to save power) and also in the advanced power settings (USB Settings USB Selective suspend setting:disabled) I have also disabled USB powershare in the BIOS (not sure what this actually does!) This is becoming very annoying having to restart the machine every day before I can start work Running Win 7 Pro x64 EDIT: I have found that setting USB Emulation to Disabled has helped the devices to be recognised during start up but they keep dropping out completely when in use EDIT 2: I contacted Dell about this issue who told me to update the BIOS driver, when I asked if I should downgrade from the factory installed A13 to the A12 posted on the dell website they said no. However there is now an A14 available on the website has anyone tried this?

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• Attempting to set up xampp and zend server on the same machine

  - by umbregachoong

  I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

  Read the article

• How to get partition information from non-booting server?

  - by gravyface

  Need to manually rebuild a mirrored array on a server and am in the process of reinstalling SBS 2003 on it. However, it's a Dell server, and know that there's the Dell FAT32 diagnostics partition, a system partition, and a data partition, but do not know the size of each. Planning on reinstalling SBS 2003, all applications on the server, and then doing a System State restore, but figured that not having the correct partitions will cause some grief: am I right? Almost thinking that the size of the partitions shouldn't matter, but not positive. Question: should I care about the size of the partition? If so, how can I get this partition information from a non-booting drive? We have an Acronis image of the one working disk and the partitions are mounted/viewable in Explorer on a workstation, but I'm not sure where the Logical Disk Manager/Disk Management data is stored and/or if there's a way to retrieve it without having a working Windows installation.

  Read the article

• Changing Corosync/Heartbeat pair's active node based on MySQL/Galera cluster state

  - by Hace

  Background I'm planning on building a High Availability "cluster" for our Zabbix instance by placing two physical servers in one server room and two in another server room. In each server room one of the physical servers will run Zabbix on RHEL and the other will run Zabbix's MySQL database, also on RHEL. I'd prefer synchronous replication for the MySQL nodes so I'm planning on using Galera in a master-slave configuration. The Zabbix instances on the two Zabbix servers would be controlled by Heartbeat/Corosync (although Red Hat Cluster Suite is also an option...) If the Zabbix server in Server Room A goes down, the one in Server Room B becomes active (and vice versa). Ditto for the MySQL servers/instances. If either of those cases happen, however, the connection between the Zabbix server and the MySQL server becomes significantly slower as ti has to travel over WAN. Question Is it possible to configure the Heartbeat/CoroSync pair to instruct the MySQL/Galera cluster to change the master node to switch to (if available) the one that's in the server room as the active Heartbeat/Corosync -node and (more challengingly) is it possible to do the same in the other direction, i.e have the Galera cluster change the active Heartbeat/CoroSync server to be in the same room as the active MySQL master server in case of a failover in over to avoid unnecessary WAN transfers between the application and its DB? Theories Most likely I can get CoroSync to run something that'd log in to one of the DB nodes to change the MySQL/Galera master but I don't know if it's really possible to do anything similar in the other direction in Galera. Is it possible to define a "service" in CoroSync/Heartbeat so that both the service and its MySQL service would migrate as one if possible. Using the DB server that's behind WAN should still be a better option to DB downtime. Am I just using too many tools to solve a problem that'd be far simpler with something else?

  Read the article

• Grub Error 18 - Solid State Drive

  - by clint

  I recently used Raw Copy to make an image of my 300gb Raptor Hd to a OCZ Vertex SSD 60GB. And When I pluged in the SSD to boot I get a Grub Error 18. I have tried to changed in the BIOS setting to LBA, Large, Auto, trying different combination's. Any advice. thanks, Clint

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• Currently well suited SATA2-SSDs for Laptop usage

  - by danilo

  I am looking for a solid state drive for my laptop. My dillemma: I have been waiting for the new Intel SSDs since Q3/2010, as I've heard they should be better and cheaper, due to lower memory manufacturing costs. Now it looks like the new Intel drives are very fast, but still expensive. I would still buy one of them if I could benefit from the full speed. My hardware only has a SATA-2 port though. Thus, my question: Is it worthwhile to buy one of those new Intel SSDs made for SATA-3 if I won't be able to use the full speed? Are there any other promising new SSDs that will be released soon? (Inside the next 1-2 months) If I wouldn't make a good deal buying the newer, faster drives, what drives can you recommend? I don't consider this question subjective, as I am mainly looking for answers concerning the SATA-2/SATA-3 conflict.

  Read the article

• Automating first time login process in Windows Server 2008 R2 SP1 virtual machine

  - by George Durzi

  I have a set of Windows 2008 Server R2 SP1 Enterprise Edition virtual machines running in Hyper-V. The host server has 64GB of RAM and two SSD drives (one drive for the host OS, and the second one for the VMs). The virtual machines are as follows: Domain Controller: 4GB RAM Exchange Server: 4GB RAM Terminal Services: 50GB RAM We use this setup for a travelling training class where users remote desktop to one of the VMs - let's call it the Terminal Services or "TS" VM - where tools such as Visual Studio are installed. The students go through some labs on the TS VMs in Visual Studio. Overall, this setup works great. However, when users are collectively logging in for the first time, the VM really struggles to keep up while all the user profiles are created. It can take some users up to 10 minutes to login. The number varies from 30 to 40 students. A workaround to this would be to manually remote desktop to the TS virtual machine using all the accounts to ensure that the local profile is created in advance. I'm looking for a way to automate the first time login process on the TS virtual machine. I am envisioning iterating through the accounts in a certain Active Directory OU, and then somehow initiating a remote desktop session to the TS VM to log them in for the first time. Are there ways to do this? Thanks

  Read the article

• WBAdmin SystemState Problems

  - by TheD

  I recently installed DHCP on my 2008R2 Server and now Backup Exec and WBAdmin/WSB is having System State issues. Essentially, after some research, I came across a handy tool called VSHADOW which has allowed me to output all the files (and their respective directories) to a text file. And hooray, I think I found the problem: * WRITER "Dhcp Jet Writer" - WriterId = {be9ac81e-3619-421f-920f-4c6fea9e93ad} - InstanceId = {0ed0a8f4-19b0-414d-a3a8-d51d6f4ac8e0} - Supports restore events = TRUE - Writer restore conditions = VSS_WRE_IF_REPLACE_FAILS - Restore method = VSS_RME_RESTORE_AT_REBOOT - Requires reboot after restore = TRUE - Excluded files: - Component "Dhcp Jet Writer:\C:_Windows_system32_dhcp\dhcp" - Name: 'dhcp' - Logical Path: 'C:_Windows_system32_dhcp' - Full Path: '\C:_Windows_system32_dhcp\dhcp' The logical path and Full Path for DHCP is completely wrong. However I can't find where I would change this path, I assume in the registry but I've had no luck finding the key !

  Read the article

• OS X can connect to Windows machine, but can't access shared folders

  - by Bonnie

  I can create new folders on my Windows XP machine, set them to "shared". On my Mac, I pick Finder → Go → Connect to Server → smb://192.168.1.4 → Connect → Name / Password. It even shows me all the names of the newly created shared-folders on my PC, but when I try to actually connect to any of them I get connection failed, there was an error connecting Any idea on what would cause that? The fact that it successfully gets so far—to actually showing me my PC share-names—must mean I have 99% of this working correctly, i.e. the physical connection, the IP address, the user name, the password, etc. Still, I can't seem to access the folders themselves. I've tried this with my Windows XP firewall on/off, and Norton AntiVirus on/off. Same problem. Everything did work fine, 4 months ago. Were there any odd OS X or Windows updates released recently? I always apply them all. smbclient on the Mac does correctly find the XP machine, my XP user name, and accepts my XP password. I get the following from that smbclient command: Doing spnego session setup (blob length=16) server didn't supply a full spnego negprot Got challenge flags: ... Got NTLMSSP flags: ... Got NTLMSP flags: ... Domain=[XPMACHINE] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] tree connect failed: NT_STATUS_INSUFF_SERVER_RESOURCES I'm not sure why a standard XP box can't "supply a full spnego negprot". Whatever that means. Using XP's RegEdit to change my IRPStackSize from 11... to 13, 15, 20, 22... still gives that "NT_STATUS_INSUFF_SERVER_RESOURCES" error on the Mac.

  Read the article

• Tunneling a public IP to a remote machine

  - by Jim Paris

  I have a Linux server A with a block of 5 public IP addresses, 8.8.8.122/29. Currently, 8.8.8.122 is assigned to eth0, and 8.8.8.123 is assigned to eth0:1. I have another Linux machine B in a remote location, behind NAT. I would like to set up an tunnel between the two so that B can use the IP address 8.8.8.123 as its primary IP address. OpenVPN is probably the answer, but I can't quite figure out how to set things up (topology subnet or topology p2p might be appropriate. Or should I be using Ethernet bridging?). Security and encryption is not a big concern at this point, so GRE would be fine too -- machine B will be coming from a known IP address and can be authenticated based on that. How can I do this? Can anyone suggest an OpenVPN config, or some other approach, that could work in this situation? Ideally, it would also be able to handle multiple clients (e.g. share all four of spare IPs with other machines), without letting those clients use IPs to which they are not entitled.

  Read the article

• Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

  - by Bill

  I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

  Read the article

• NFS4 / ZFS: revert ACL to clean/inherited state

  - by Keiichi

  My problem is identical to this Windows question, but pertains NFS4 (Linux) and the underlying ZFS (OpenIndiana) we are using. We have this ZFS shared via NFS4 and CIFS for Linux and Windows users respectively. It would be nice for both user groups to benefit from ACLs, but the one missing puzzle piece goes thusly: Each user has a home, where he sets a top-level, inherited ACL. He can later on refine permissions for the contained files/folders iteratively. Over time, sometimes permissions need to be generalized again to avoid increasing pollution of ACL entries. You can tweak the ACL of every single file if need be to obtain the wanted permissions, but that defeats the purpose of inherited ACLs. So, how can an ACL be completely cleared like in the question linked above? I have found nothing about what a blank, inherited ACL should look like. This usecase simply does not seem to exist. In fact, the solaris chmod manpage clearly states A- Removes all ACEs for current ACL on file and replaces current ACL with new ACL that represents only the current mode of the file. I.e. we get three new ACL entries filled with stuff representing the permission bits, which is rather useless for cleaning up. If I try to manually remove every ACE, on the last one I get chmod A0- <file> chmod: ERROR: Can't remove all ACL entries from a file Which by the way makes me think: and why not? In fact, I really want the whole file-specific ACL gone. The same holds for linux, which enumerates ACEs starting with 1(!), and verbalizes its woes less diligently nfs4_setacl -x 1 <file> Failed setxattr operation: Unknown error 524 So, what is the idea behind ACLs under Solaris/NFS? Can they never be cleaned up? Why does the recursion option for the ACL setting commands pollute all children instead of setting a single ACL and making the children inherit? Is this really the intention of the designers? I can clean up the ACLs using a windows client perfectly well, but am I supposed to tell the linux users they have to switch OS just to consolidate permissions?

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >