Search Results

Search found 18244 results on 730 pages for 'controller action'.

Page 557/730 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >

• Setup of HP ProCurve 2810-24G for iSCSI?

  - by 3molo

  Hi, I have a pair of ProCurve 2810-24G that I will use with a Dell Equallogic SAN and Vmware ESXi. Since ESXi does MPIO, I am a little uncertain on the configuration for links between the switches. Is a trunk the right way to go between the switches? I know that the ports for the SAN and the ESXi hosts should be untagged, so does that mean that I want tagged VLAN on the trunk ports? This is more or less the configuration: trunk 1-4 Trk1 Trunk snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 24,Trk1 ip address 10.180.3.1 255.255.255.0 no untagged 5-23 exit vlan 801 name "Storage" untagged 5-23 tagged Trk1 jumbo exit no fault-finder broadcast-storm stack commander "sanstack" spanning-tree spanning-tree Trk1 priority 4 spanning-tree force-version RSTP-operation The Equallogic PS4000 SAN has two controllers, with two network interfaces each. Dell recommends each controller to be connected to each of the switches. From vmware documentation, it seems creating one vmkernel per pNIC is recommended. With MPIO, this could allow for more than 1 Gbps throughput.

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• Data Protection Manager System Protection Backups Failing

  - by TrueDuality

  I'm just starting to setup DPM 2010 in a test environment with a Domain Controller and a File Server. Everything seem to be working fairly well and I can get all of my backup jobs to succeed except for the "Computer\System Protection" backups. Both servers are running fully up to date 64 bit Windows Server 2008 R2 Enterprise with Service Pack 1. The error that is being provided is: DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x8078001D). (ID 30229 Details: Internal error code: 0x809909FB) This Microsoft Knowledge Base article describes the issue perfectly and provides a hotfix. I downloaded the hotfix, moved it onto the affected server, attempt to run it and receive the following error: The update is not applicable to your computer. I've verified that I have indeed downloaded the 64 bit version. According to this thread the hotfix got rolled into Service Pack 1, yet I'm still experiencing the issue. Both machines do have the Windows Server Backup feature installed. Can anybody point me in the right direction? What am I missing?

  Read the article

• IIS 7 rewriting subdomain to point at a specific port

  - by Tommy Jakobsen

  Having installed Team Foundation Server 2010 on Windows Server 2008, I need an easy URL for our developers to access their repositories. The default URL for the TFS repositories is http://localhost:8080/tfs Now I want the subdomain domain tfs.server.domain.com to point at http://localhost:8080/tfs. And when you access tfs.server.domain.com/repos_name it should redirect to http://localhost:8080/tfs/repos_name. How can I do this in IIS7? I already tried using the following rule, but it does not work. I get a 404. <rewrite> <globalRules> <rule name="TFS" stopProcessing="true"> <match url="^(?:tfs/)?(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^tfs.server.domain.com$" /> </conditions> <action type="Rewrite" url="http://localhost:8080/tfs/{R:1}" /> </rule> </globalRules> </rewrite> EDIT I actually got this working by adding a binding for the site on port 80 with host name tfs.server.domain.com. But using tfs.server.domain.com, I can't authenticate using Windows Authentication. Is there something that I need to configure for Windows Authentication? You can see a trace here: http://pastebin.com/k0QrnL0m

  Read the article

• How can I stream audio signals from various devices/computers to my home server?

  - by Breakthrough

  I currently have a headless home server set up (running Ubuntu 12.04 server edition) running a simple Apache HTTP server. The server is near an audio receiver, which controls a set of indoor and outdoor speakers in my home. Recently, my father purchased a Bluetooth adapter, which our various laptops and cellphones can connect to, outputting the music to the speakers. I was hoping to find a solution that worked over Wi-Fi, namely because it won't cost anything (I already have a server with an audio card), and it doesn't depend on Bluetooth. Is there any cross-platform (preferably free and open-source) solution that I can use which will allow me to stream audio to my home server, over my home network, from a wide variety of devices (laptops running Windows/Linux or cellphones running Android/BB/iOS)? I need something that works at least with Windows and Android. Also, just to clairfy, I want something that simply allows devices to connect to my server and output an audio signal without any action on the server end (since it's a server hidden away near my receiver). Any subsequent connection attempt should be dropped, so only one device can be in control of the stereo at once.

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Missing Home Folder XP Clients 2008R2 Domain

  - by minamhere

  We just completed a migration from Server 2003 to Server 2008R2. Everything seems to have gone well except that many of our desktops have stopped mapping the Home Folder as set in Active Directory. Other mappings that are defined on individual clients are mapping just fine, these mappings are all on the same file server as the failing Home Folders. Half of the users are on 1 file server and half are on another. Users from both servers are having this problem. I have enabled the Group Policy setting to "Wait for network before logging in". I enabled the policy to "Run Logon Scripts synchronously". There are no errors on the Domain Controller or either File Server. When I enabled Group Policy Preferences as an attempted workaround, I get this error: The user 'V:' preference item in the '<Policy Name>' Group Policy object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed. This seems to indicate that the network connection is not ready by the time Group Policy is processed. But isn't this the point of the "Wait before logging in" and "Run Logon scripts synchronously" settings? Some other background facts: The new Server 2008R2 installation is a Virtual Machine. It is on a new Subnet in a different building from the old server. DNS and DHCP were also migrated from the old DC to this new DC. These Home Folders were all working properly before the migration. Are there new security restrictions/policies in Server 2008R2 that might be causing this? Is there a way to check whether I have an underlying network connectivity issue? Maybe moving the server to the new building is causing a delay/timeout? Any thoughts or ideas on what could be causing this or how I can resolve this? Thanks.

  Read the article

• Postgresql base backup script

  - by Terry Lorber

  I'm using the following script to do a file-level backup of Postgresql. I sometimes see that the last part, to do cleanup after "pgs_backup_stop" is called, hangs while it waits for the last WAL to be created. The REF_FILE to search for is sometimes wrong. I'm also shipping these files to a different machine, every 5 minutes via rsync. What do other people do to safely remove old WAL files? #!/bin/bash PGDATA=/usr/local/pgsql/data WAL_ARCHIVE=/usr/local/pgsql/archives PGBACKUP=/usr/local/pgsqlbackup PSQL=/usr/local/pgsql/bin/psql today=`date +%Y%m%d-%H%M%S` label=base_backup_${today} echo "Executing pg_start_backup with label $label in server ... " CP=`$PSQL -q -Upostgres -d template1 -c "SELECT pg_start_backup('$label');" -P tuples_only -P format=unaligned` RVAL=$? echo "Begin CheckPoint is $CP" if [ ${RVAL} -ne 0 ] then echo "PSQL pg_start_backup failed" exit 1; fi echo "pg_start_backup executed successfully" echo "TAR begins ... " pushd $PGBACKUP tar -cjf pgdata-$today.tar.bz2 --exclude='pg_xlog' $PGDATA/* popd echo "TAR completed" echo "Executing pg_stop_backup in server ... " $PSQL -Upostgres template1 -c "SELECT pg_stop_backup();" if [ $? -ne 0 ] then echo "PSQL pg_stop_backup failed" exit 1; fi echo "pg_stop_backup done successfully" TO_SEARCH="*${CP:0:2}000000${CP:3:2}.00${CP:5}" echo "Check for ${WAL_ARCHIVE}/${TO_SEARCH}.backup" while [ ! -e ${WAL_ARCHIVE}/${TO_SEARCH}.backup ]; do echo "Waiting for ${WAL_ARCHIVE}/${TO_SEARCH}.backup" sleep 1 done REF_FILE="`echo ${WAL_ARCHIVE}/*${CP:0:2}000000${CP:3:2}`" echo "Reference file ${REF_FILE}" # "-not -newer" or "\! -newer" will also return REF_FILE # so you have to grep it out and use xargs; otherwise you # could also use the -delete action find ${WAL_ARCHIVE} -not -newer ${REF_FILE} -type f | grep -v "^${REF_FILE}$" | xargs rm -f REF_FILE="`echo ${PGBACKUP}/pgdata-$today.tar.bz2`" echo "Reference file ${REF_FILE}" find $PGBACKUP -not -newer ${REF_FILE} -type f -name pgdata* | grep -v "^${REF_FILE}$" | xargs rm -f

  Read the article

• New Computer freezing up at random

  - by Benjamin Frost

  Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

  Read the article

• Expected IOPS for log writing on PS6000X SAN?

  - by dssz

  Customer is experiencing poor Sybase ASE 15 performance on a PS6000X SAN with 16 X 450GB 10K in RAID-50. The server is a Dell R710 running 2003 server R2 64bit in ESX 4.0.0,256968 I've used sqlio to benchmark the sequential write performance of 4KB blocks on the drive. sqlio -kW -t1 -s600 -dE -o1 -fsequential -b4 -BH -LS sqliotestfile.dat Result is 1900 IOPS. However, when Sybase is running a sustained workload of small inserts SAN HQ shows a consistent 590 IOPS (and 100% 4K write activity). It also shows that the write latency increases to 1.2ms from <1ms. Monitoring and tests in Sybase demonstrate the performance problem is IO related and in particular there is a lot of wait time writing to the log. The SAN indicates that write caching is enabled. What IOPS should the SAN be capable of for 4k sequential write activity? Also, with write caching enabled, shouldn't the controller be batching up the 4K writes into something more efficient? Also, any tips on Sybase on ESX would be appreciated.

  Read the article

• WS2008 NTP - Using time.windows.com,0x9 - Time always skewed forwards

  - by David

  I have a domain controller configured to use time.windows.com (with 0x09 flags set). I've noticed that frequently the systems' clock is fast - it varies from 10 minutes to even 45 minutes. I always have to keep resetting the system date/time back to what it should be. When I run "w32tm /query /source" it tells me it's using time.windows.com, and obviously I trust Microsoft not to serve incorrect times, but why is my server's clock fast? EDIT: There are a few Time-Service events in the System log: Event ID: 142 Message: The time service has stopped advertising as a time source because the local clock is not synchronized. Event ID: 139 Message: The time service has started advertising as a time source. These two messages appear in pairs every hour or so. Event 142 appears 14 to 16 minutes after 139 appears. Going back a few months, these events appear: Event ID: 35 Message: The time service is now synchronizing the system time with the time source time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 37 Message: The time provider NtpClient is currently receiving valid time data from time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 47 Message: Time Provider NtpClient: No valid response has been received from manually configured peer time.windows.com,0x9 after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name. The error was: The time sample was rejected because: The peer is not synchronized, or it has been too long since the peer's last synchronization. These three events only appear once in the log, back in October.

  Read the article

• Can't connect two PCs to a Network Switch at the same time (Windows 7)

  - by puk

  I have two computers connected to a network switch and every once in a while one of the computers will lose its internet connection. It's almost always the same computer every time. However, if I play around with the control panel, I can switch it, so that now the other computer is not connected. Restarting either of the computers does not help either. In Windows, the worlds-greatest-trouble-shooter tells me that a network cable is unplugged and that I should try plugging it in...Disabling and re-enabling my NIC does not fix this problem, neither does swapping cables around. When rebooting, the BIOS complains about how the Ethernet Cable is not plugged in. If it's in any way important, My set up at the office is like so: Modem - Routher - Network Switch 1 - Network Switch 2. I have tried turning off the energy saving option for my NIC, and I tried manually setting the link-speed to 100Mbps Full Duplex without any luck. Also, I have a Realtek PCIe GBE Family controller on both computers Does anyone have any idea why this is happening every 5-10 days? EDIT: I have also tried using a completely different Network Switch and the problem still persists as before.

  Read the article

• SQLVDI error - attempt to release mutex not owned by caller

  - by Chris W

  I've started getting some errors in the App event log of one of our database servers (Windows 2003 & SQL Server 2005). The nightly full database backups are completing successfully however immediately after the job success is written to the event log there is a run of entries that say: SQLVDI: Loc=CVDS. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. There's five of these logged - the server itself has more than 20 databases on it which are all backed up successfully. The server is backed up by Bacula using a VSS backup. Has anyone got any ideas what would be causing the errors? They seem to have started after a re-boot on Friday to install some patches which included KB960089. Edit: After getting the errors for a few days they've now stopped without any action on my part other than letting the backups continue as they were. It may be a coincidence but they stopped after Bacula completed its weekly full rather than the daily incremental backup.

  Read the article

• 550 Forged HELO with postfix on debian lenny

  - by Martin Ahrer

  I'm running postfix on a debian lenny system. sending mail in general works without any problems. however some recipent mail systems return an error and I can't get a clue what is causing the problem. So far I suspect that this is either postfix setup itself or the reverse dns resolution. The mail server is running on a virtual server from my service provider. running the command hostname is returning my.domain however running host <ip-address> is returning some alias from the virtual server system. now i'm not quite sure if that is causing my problem???? The mail system <recipient-mail>: host mx0.recipient.domain[xxx.xxx.xxx.xxx] refused to talk to me: 550 Forged HELO: you are not my.domain Reporting-MTA: dns; my.domain X-Postfix-Queue-ID: 6A1135B08002 X-Postfix-Sender: rfc822; [email protected] Arrival-Date: Tue, 13 Apr 2010 17:50:36 +0200 (CEST) Final-Recipient: rfc822; recipient-mail Action: failed Status: 5.0.0 Remote-MTA: dns; mx0.recipient.domain Diagnostic-Code: smtp; 550 Forged HELO: you are not my.domain

  Read the article

• SQLVDI error - attempt to release mutex not owned by caller

  - by Chris W

  I've started getting some errors in the App event log of one of our database servers (Windows 2003 & SQL Server 2005). The nightly full database backups are completing successfully however immediately after the job success is written to the event log there is a run of entries that say: SQLVDI: Loc=CVDS. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. There's five of these logged - the server itself has more than 20 databases on it which are all backed up successfully. The server is backed up by Bacula using a VSS backup. Has anyone got any ideas what would be causing the errors? They seem to have started after a re-boot on Friday to install some patches which included KB960089. Edit: After getting the errors for a few days they've now stopped without any action on my part other than letting the backups continue as they were. It may be a coincidence but they stopped after Bacula completed its weekly full rather than the daily incremental backup.

  Read the article

• How to connect the virtual networks of vmware guests running on different hosts?

  - by gyrolf

  In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

  Read the article

• Outlook 2007 "Mark as Not Junk" Dialog Confusion

  - by David

  Outlook 2007's "Not Junk" button opens the "Mark as Not Junk" dialog. The dialog works correctly if I keep the "Always trust e-mail from <email address>" option checked. That is, the message is removed from the Junk folder and returns to the Inbox. However, if I uncheck the "Always trust" box, pressing OK dismisses the dialog, but nothing else happens. Why not? According to Outlook help, "When you mark a message as not junk, you are given the option of adding the sender or the mailing list name to your Safe Senders List or Safe Recipients List." That sure makes it sound like this is just an option, and not necessary for the core functionality of the action. I really don't want to trust a (possibly forged) From: address, but I do want my mail back in the Inbox. I could manually drag it, but I'm assuming that marking a message as not junk also trains some kind of bayesian filter. Am I mistaken? Thanks.

  Read the article

• Ubuntu raid 1 write errors

  - by Micah

  I have an Ubuntu server set up with two SATA drives in a RAID 1 configuration with MDADM. The machine is used to record raw video, which involves a lot of writing to the disk. Sometimes during video recording the computer will crash, will the following errors in kern.log: Mar 15 10:39:41 video kernel: [414501.629864] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 Mar 15 10:39:41 video kernel: [414501.629870] ata2.00: BMDMA stat 0x26 Mar 15 10:39:41 video kernel: [414501.629875] ata2.00: SError: { UnrecovData Handshk } Mar 15 10:39:41 video kernel: [414501.629880] ata2.00: failed command: WRITE DMA EXT Mar 15 10:39:41 video kernel: [414501.629889] ata2.00: cmd 35/00:00:28:6d:f6/00:04:06:00:00/e0 tag 0 dma 524288 out Mar 15 10:39:41 video kernel: [414501.629891] res 51/84:b1:77:6e:f6/84:02:06:00:00/e0 Emask 0x30 (host bus error) Mar 15 10:39:41 video kernel: [414501.629896] ata2.00: status: { DRDY ERR } Mar 15 10:39:41 video kernel: [414501.629899] ata2.00: error: { ICRC ABRT } Mar 15 10:39:41 video kernel: [414501.629910] ata2.00: hard resetting link Mar 15 10:39:41 video kernel: [414501.973009] ata2.01: hard resetting link Mar 15 10:39:41 video kernel: [414502.482642] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 15 10:39:41 video kernel: [414502.482658] ata2.01: SATA link down (SStatus 0 SControl 300) Mar 15 10:39:41 video kernel: [414502.546160] ata2.00: configured for UDMA/133 Mar 15 10:39:41 video kernel: [414502.546203] ata2: EH complete Is this the result of faulty drives? Is software RAID just not performant enough for data rates ~15 MB/s, even with a quad-core i7? Thanks for your help. Edit: cat /proc/mdstat returns this: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdb1[1] sda1[0] 976760768 blocks [2/2] [UU] unused devices: <none>

  Read the article

• Update BIOS on Sun Fire X4150 server

  - by Massimo

  I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

  Read the article

• Linux machine can't find its tape drive

  - by Kyle Hodgson

  I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

  Read the article

• How to plug power/reset buttons from case to motherboard leads?

  - by MaxMackie

  I have a motherboard I salvaged from a pre-assembled computer. Except now I'm trying to use it in my own custom build. The problem is, this motherboard doesn't have any documentation because it was never meant to be used by consumers (as far as I know). I need to plug in my case's power/reset/hdd-light plugs into the motherboard. I usually check the documentation of the board to see which leads go to what connector, but I have no documentation for the board. So, as I see it, I have two options: I find the documentation (I've emailed gateway customer service, but I'm unsure of how successful I'll be with that). I simply test the leads one after the other (can this cause damage if plugged into the wrong leads?) However, there might even be a standard for which leads do what action (I'm not sure about this). For reference, my motherboard's SN/MD (?) is: H57M01G1-1.1-8EKS3H Does anyone have any idea if I can find documentation or find another way to be sure if my connections are correct?

  Read the article

• Windows 7 - system error 5 problem

  - by Ian

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• Debian/Redmine: Upgrade multiple instances at once

  - by Davey

  I have multiple Redmine instances. Let's call them InstanceA and InstanceB. InstanceA and InstanceB share the same Redmine installation on Debian. Suppose I would want to install Redmine 1.3 on both instances, how would I do that? After upgrading the core files I would have to migrate the databases. What I would like to know is: can I migrate all databases in a single action? Normally I would do something like: rake -s db:migrate RAILS_ENV=production X_DEBIAN_SITEID=InstanceA for each instance, but this would get tedious if you have 50+ instances. Thanks in advance! Edit: The README.Debian file that's in the (Debian) Redmine package states: SUPPORTS SETUP AND UPGRADES OF MULTIPLE DATABASE INSTANCES This redmine package is designed to automatically configure database BUT NOT the web server. The default database instance is called "default". A debconf facility is provided for configuring several redmine instances. Use dpkg-reconfigure to define the instances identifiers. But can't figure out what to do with the "debconf facility". Edit2: My environment is a default Debian 6.0 "Squeeze" installation with a default Redmine (aptitude install redmine) installation on a default libapache2-mod-passenger. I have setup two instances with dpkg-reconfigure redmine.

  Read the article

• Network Traffic Log

  - by Chris Becke

  Background - On my "home" network I have a Linksys WTR45GL router providing my internet access as well as a wireless AP. Connected I have * 2 Windows PCs (wired) * At least one laptop (Wired) * Some 802.11 enabled handheld consoles (PSPs) * A Nintendo Wii * Some windows XP pcs used by the people in the granny flat. Where I live, South Africa, well, 1Gb worth of monthly cap is, while not expensive, costly enough that I'd like to be sure that all the bandwidth used by devices on my network is ... well ... legitimate and not the result of neighbors parasiting my wireless, malware or just the result of "liberal" download policies in my software. I got the Linksys WRT45GL on the understanding that there were custom firmwares (DD-WRT and Tomato) that allowed bandwidth tracking, but there doesn't seem to be any facility to get a log of traffic that can be examined to see (a) which local devices were the biggest consumers of bandwidth and (b) what they were connected to. What tools are there for logging traffic such that, when it gets to that OMG moment in the month when all my bandwidth is gone, I have a chance to find out what the hell used it all up (and hopefully attempt some corrective action).

  Read the article

• multiple folder structures/views

  - by Sojourner

  Newbie. Setting up a server for a law firm. Want to set up the folder structure as follows: Client 1 Name -- Matter 1 (i.e. setting up corporation) -- Matter 2 (i.e. divorce) -- Matter 3 (i.e. setting up trust) Client 2 Name -- Matter 1 Client 3 Name -- Matter 1 and so on. But the attorneys prefer navigating a folder structure, more based on what case type: Civil -- Client 1 Name (i.e. Smythe) -- Client 2 Name (i.e. Jones) -- Client 3 Name (i.e. Johson) -- Landlord/Tenant -- Client 1 Name (i.e. Jones) -- Client 2 Name (i.e. Johson) -- Class Action Suits -- Suit 1 -- Suit 2 Personal Injury -- Client 1 Name -- Client 2 Name -- Client 3 Name Criminal -- Client 1 Name (i.e. Smythe) I'd like to know if it's possible to set up the server with the first folder structure (it's more organized and easier to employ scripts), while having the second folder structure available for users who find it easier to deal with the same types of cases grouped together.

  Read the article

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >