Search Results

Search found 44501 results on 1781 pages for 'software development life'.

Page 590/1781 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

  • Xna Equivalent of Viewport.Unproject in a draw call as a matrix transformation

    - by Nick Crowther
    I am making a 2D sidescroller and I would like to draw my sprite to world space instead of client space so I do not have to lock it to the center of the screen and when the camera stops the sprite will walk off screen instead of being stuck at the center. In order to do this I wanted to make a transformation matrix that goes in my draw call. I have seen something like this: http://stackoverflow.com/questions/3570192/xna-viewport-projection-and-spritebatch I have seen Matrix.CreateOrthographic() used to go from Worldspace to client space but, how would I go about using it to go from clientspace to worldspace? I was going to try putting my returns from the viewport.unproject method I have into a scale matrix such as: blah = Matrix.CreateScale(unproject.X,unproject.Y,0); however, that doesn't seem to work correctly. Here is what I'm calling in my draw method(where X is the coordinate my camera should follow): Vector3 test = screentoworld(X, graphics); var clienttoworld = Matrix.CreateScale(test.X,test.Y, 0); animationPlayer.Draw(theSpriteBatch, new Vector2(X.X,X.Y),false,false,0,Color.White,new Vector2(1,1),clienttoworld); Here is my code in my unproject method: Vector3 screentoworld(Vector2 some, GraphicsDevice graphics): Vector2 Position =(some.X,some.Y); var project = Matrix.CreateOrthographic(5*graphicsdevice.Viewport.Width, graphicsdevice.Viewport.Height, 0, 1); var viewMatrix = Matrix.CreateLookAt( new Vector3(0, 0, -4.3f), new Vector3(X.X,X.Y,0), Vector3.Up); //I have also tried substituting (cam.Position.X,cam.Position.Y,0) in for the (0,0,-4.3f) Vector3 nearSource = new Vector3(Position, 0f); Vector3 nearPoint = graphicsdevice.Viewport.Unproject(nearSource, project, viewMatrix, Matrix.Identity); return nearPoint;

    Read the article

  • How to make a ball fall faster on a ramp?

    - by Timothy Williams
    So, I'm making a ball game. Where you pick up the ball, drop it on a ramp, and it flies off in to blocks. The only problem right now is it falls at a normal speed, then lightly falls off, not nearly fast enough to get over the wall and hit the blocks. Is there any way to make the ball go faster down the ramp? Maybe even make it go faster depending on what height you dropped it from (e.g. if you hold it way above the ramp, and drop it, it will drop faster than if you dropped it right above the ramp.)

    Read the article

  • FreeType2 Crash on FT_Init_FreeType

    - by JoeyDewd
    I'm currently trying to learn how to use the FreeType2 library for drawing fonts with OpenGL. However, when I start the program it immediately crashes with the following error: "(Can't correctly start the application (0xc000007b))" Commenting the FT_Init_FreeType removes the error and my game starts just fine. I'm wondering if it's my code or has something to do with loading the dll file. My code: #include "SpaceGame.h" #include <ft2build.h> #include FT_FREETYPE_H //Freetype test FT_Library library; Game::Game(int Width, int Height) { //Freetype FT_Error error = FT_Init_FreeType(&library); if(error) { cout << "Error occured during FT initialisation" << endl; } And my current use of the FreeType2 files. Inside my bin folder (where debug .exe is located) is: freetype6.dll, libfreetype.dll.a, libfreetype-6.dll. In Code::Blocks, I've linked to the lib and include folder of the FreeType 2.3.5.1 version. And included a compiler flag: -lfreetype My program starts perfectly fine if I comment out the FT_Init function which means the includes, and library files should be fine. I can't find a solution to my problem and google isn't helping me so any help would be greatly appreciated.

    Read the article

  • Rendering performance in FlasCC + UDK when compared to Stage3d and UDK on Windows?

    - by Arthur Wulf White
    Adobe recently released the Flash C++ Compiler, which UDK uses to target Flash Player. Developers can now access UDK for browser applications. Does this mean greater performance than using a Stage3D engine (Away3D 4) and how much of a noticeable difference in performance would it make in rendering speeds? Is there any benchmark you could propose that would allow to compare them fairly? I am asking this to help myself understand the consequences in performance for deciding to use UDK in a browser based game. I would also like to know how it compares with UDK running natively in Windows? I am not asking which technology to use or which is better. Only interested in optimizing rendering speed in a 3d browser game with flash.

    Read the article

  • tunnel effect cocos2d

    - by samfisher
    I am looking to create a similar tunnel effect in COCOS2D (iOS). Could anyone suggest any pointers? ref Video 1 ref Video 2 Till now I have tried with several ring shape sprites with decreasing scale and positioned center to a same point and keeping Z decreasing as well for each smaller sprite. With that, animating it with CCScaleTo and changing the size to 2.0 with animation duration but it does not come anyway near to the tunnel effect shown in the reference. Thanks, sam

    Read the article

  • How to utilize miniMax algorithm in Checkers game

    - by engineer
    I am sorry...as there are too many articles about it.But I can't simple get this. I am confused in the implementation of AI. I have generated all possible moves of computer's type pieces. Now I can't decide the flow. Whether I need to start a loop for the possible moves of each piece and assign score to it.... or something else is to be done. Kindly tell me the proper flow/algorithm for this. Thanks

    Read the article

  • changing body type without change of center of mass

    - by philipp
    I have an box2d project with some bodies in it, which move around without any user interaction. But if the user selects one of the bodies, he should be able to move it around just like he wants to. To keep it short, I want to change the type of the body to "kinematic" while the user controls it and back to "dynamic" afterwards. If I do so the rotation center of the body changes with the change of the type. How can I reset this? The body's fixture is created of a single b2PolygonShape, with its vertices set via SetAsArray(). Greetings philipp EDIT:: So I looked around about setting the local center of bodies. what brought me to this solution: var md = new b2MassData(); this.body.GetMassData( md ); this.body.SetType( b2body.b2_kinematicBody ); this.body.SetMassData( md ); that did not work, so I had a look at the source and found that SetMassData() always returns if the body is not "dynamic". So I tried this: var md = new b2MassData(); this._body.GetMassData( md ); this._body.SetType( b2Body.b2_kinematicBody ); this._body.m_sweep.localCenter.Set( md.center.x, md.center.y ); what actually is modifying the private data of the body. But it works and no errors appear, but can I really do this without the risk of breaking the application, or in other words, under which circumstances could this solution might cause errors? n.b.: I am using box2dweb of the latest release. Greetings philipp

    Read the article

  • Simultaneous AI in turn based games

    - by Eduard Strehlau
    I want to hack together a roguelike. Now I thought about entity and world representation and got to a quite big problem. If you want all the AI to act simultaneously you would normally(in cellular automa for examble) just copy the cell buffer and let all action of indiviual cells depend on the copy. Actions which are not valid anymore after some cell before the cell you are currently operating on changed the original enviourment(blocking the path) are just ignored or reapplied with the "current"(between turns) environment. After all cells have acted you copy the current map to the buffer again. Now for an environment with complex AI and big(datawise) entities the copying would take too long. So I thought you could put every action and entity makes into a que(make no changes to the environment) and execute the whole que after everyone took their move. Every interaction on this que are realy interacting entities, so if a entity tries to attack another entity it sends a message to it, the consequences of the attack would be visible next turn, either by just examining the entity or asking the entity for data. This would remove problems like what happens if an entity dies middle in the cue but got actions or is messaged later on(all messages would go to null, and the messages from the entity would either just be sent or deleted(haven't decided yet) But what would happen if a monster spawns a fireball which by itself tracks the player(in the same turn). Should I add the fireball to the enviourment beforehand, so make a change to the environment before executing the action list or just add the ball to the "need updated" list as a special case so it doesn't exist in the environment and still operates on it, spawing after evaluating the action list? Are there any solutions or papers on this subject which I can take a look at? EDIT: I don't need information on writing a roguelike I need information on turn based ai in respective to a complex enviourment.

    Read the article

  • libgdx intersection problem between rectangle and circle

    - by Chris
    My collision detection in libgdx is somehow buggy. player.png is 20*80px and ball.png 25*25px. Code: @Override public void create() { // ... batch = new SpriteBatch(); playerTex = new Texture(Gdx.files.internal("data/player.png")); ballTex = new Texture(Gdx.files.internal("data/ball.png")); player = new Rectangle(); player.width = 20; player.height = 80; player.x = Gdx.graphics.getWidth() - player.width - 10; player.y = 300; ball = new Circle(); ball.x = Gdx.graphics.getWidth() / 2; ball.y = Gdx.graphics.getHeight() / 2; ball.radius = ballTex.getWidth() / 2; } @Override public void render() { Gdx.gl.glClearColor(1, 1, 1, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); camera.update(); // draw player, ball batch.setProjectionMatrix(camera.combined); batch.begin(); batch.draw(ballTex, ball.x, ball.y); batch.draw(playerTex, player.x, player.y); batch.end(); // update player position if(Gdx.input.isKeyPressed(Keys.DOWN)) player.y -= 250 * Gdx.graphics.getDeltaTime(); if(Gdx.input.isKeyPressed(Keys.UP)) player.y += 250 * Gdx.graphics.getDeltaTime(); if(Gdx.input.isKeyPressed(Keys.LEFT)) player.x -= 250 * Gdx.graphics.getDeltaTime(); if(Gdx.input.isKeyPressed(Keys.RIGHT)) player.x += 250 * Gdx.graphics.getDeltaTime(); // don't let the player leave the field if(player.y < 0) player.y = 0; if(player.y > 600 - 80) player.y = 600 - 80; // check collision if (Intersector.overlaps(ball, player)) Gdx.app.log("overlaps", "yes"); }

    Read the article

  • Corona SDK: Animation takes a long time to play after "prepare" step

    - by Michael Taufen
    First off, I'm using the current publicly available build, version 2011.704 I'm building a platformer, and have a character that runs along and jumps when the screen is tapped. While jumping, the animation code has him assume a svelte jumping pose, and upon the detection of a collision with the ground, he returns to running. All of this happens. The problem is that there is this strange gap of time, about 1/2 a second by the feel of it, where my character sits on the first frame of the run animation after landing, before it actually starts playing. This leads me to believe that the problem is somewhere between the "prepare" step of loading up a sprite set's animation sequence and the "play" step. Thanks in advance for any help :). My code for when my character lands is as follows: local function collisionHandler ( event ) if (event.object1.myName == "character") and (event.object2.type == "terrain") then inAir = false characterInstance:prepare( "run" ) -- TODO: time between prepare and play is curiously long... characterInstance:play() end end

    Read the article

  • How are buttons made to be clicked?

    - by Johnny
    I just want to ask a general question. According to that answer, Ill continue thinking. You know in games there are lots of clickable items. Play button, exit, comboboxes maybe etc. My question is are those buttons drawn in same canvas with background and all other things, or for every different thing there is another canvas object? My question is about for general. Im not asking about a specific game, im asking how they are made generally. Im planning to start a game on Android, and Im confused actually how to design buttons, and other object. Probably Im going to use View/SurfaceView for now. I don't have much experience with OpenGL yet. Thanks in advance.

    Read the article

  • How to implement a simple bullet trajectory

    - by AirieFenix
    I searched and searched and although it's a fair simple question, I don't find the proper answer but general ideas (which I already have). I have a top-down game and I want to implement a gun which shoots bullets that follow a simple path (no physics nor change of trajectory, just go from A to B thing). a: vector of the position of the gun/player. b: vector of the mouse position (cross-hair). w: the vector of the bullet's trajectory. So, w=b-a. And the position of the bullet = [x=x0+speed*time*normalized w.x , y=y0+speed*time * normalized w.y]. I have the constructor: public Shot(int shipX, int shipY, int mouseX, int mouseY) { //I get mouse with Gdx.input.getX()/getY() ... this.shotTime = TimeUtils.millis(); this.posX = shipX; this.posY = shipY; //I used aVector = aVector.nor() here before but for some reason didn't work float tmp = (float) (Math.pow(mouseX-shipX, 2) + Math.pow(mouseY-shipY, 2)); tmp = (float) Math.sqrt(Math.abs(tmp)); this.vecX = (mouseX-shipX)/tmp; this.vecY = (mouseY-shipY)/tmp; } And here I update the position and draw the shot: public void drawShot(SpriteBatch batch) { this.lifeTime = TimeUtils.millis() - this.shotTime; //position = positionBefore + v*t this.posX = this.posX + this.vecX*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); this.posY = this.posY + this.vecY*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); ... } Now, the behavior of the bullet seems very awkward, not going exactly where my mouse is (it's like the mouse is 30px off) and with a random speed. I know I probably need to open the old algebra book from college but I'd like somebody says if I'm in the right direction (or points me to it); if it's a calculation problem, a code problem or both. Also, is it possible that Gdx.input.getX() gives me non-precise position? Because when I draw the cross-hair it also draws off the cursor position. Sorry for the long post and sorry if it's a very basic question. Thanks!

    Read the article

  • What is involved for a simple UDP game?

    - by acidzombie24
    I once tried to write a simple game with UDP in a week as a throwaway test. It went horribly. I threw it away early. The main problem i had was restoring the game state of all players/enemies/objects to an old state and fast forward the game to the point of time the player is playing (ie half a second before a jump. A little early or late can make the player miss the jump) Maybe this method is not the easiest way? i suspect it to be but i designed it wrong from the beginning and realized at the end of 2nd day. (so i didnt learn too much or wasted that much time) For myself and others, What is involved for a simple UDP game and how do i write one? Or how do i solve the prediction problem restoring to state properly. I'll mark this as CW bc i know there will be lots of helpful answers.

    Read the article

  • Typical Applications of Linear System Solver in Game Developemnt

    - by craftsman.don
    I am going to write a custom solver for linear system. I would like to survey the typical problems involved the linear system solving in games. So that I can custom optimization on these problems based on the shape of the matrix. currently I am focus on these problems: B-Spline editing (I use a linear solve to resolve the C0, C1, C2 continuity) Constraint in Simulation (especially Position-Constraint, cloth) Both of them are Banded Matrix. I want to hear about some other applications of a linear system in games. Thank you.

    Read the article

  • Issues with touch buttons in XNA (Release state to be precise)

    - by Aditya
    I am trying to make touch buttons in WP8 with all the states (Pressed, Released, Moved), but the TouchLocationState.Released is not working. Here's my code: Class variables: bool touching = false; int touchID; Button tempButton; Button is a separate class with a method to switch states when touched. The Update method contains the following code: TouchCollection touchCollection = TouchPanel.GetState(); if (!touching && touchCollection.Count > 0) { touching = true; foreach (TouchLocation location in touchCollection) { for (int i = 0; i < menuButtons.Count; i++) { touchID = location.Id; // store the ID of current touch Point touchLocation = new Point((int)location.Position.X, (int)location.Position.Y); // create a point Button button = menuButtons[i]; if (GetMenuEntryHitBounds(button).Contains(touchLocation)) // a method which returns a rectangle. { button.SwitchState(true); // change the button state tempButton = button; // store the pressed button for accessing later } } } } else if (touchCollection.Count == 0) // clears the state of all buttons if no touch is detected { touching = false; for (int i = 0; i < menuButtons.Count; i++) { Button button = menuButtons[i]; button.SwitchState(false); } } menuButtons is a list of buttons on the menu. A separate loop (within the Update method) after the touched variable is true if (touching) { TouchLocation location; TouchLocation prevLocation; if (touchCollection.FindById(touchID, out location)) { if (location.TryGetPreviousLocation(out prevLocation)) { Point point = new Point((int)location.Position.X, (int)location.Position.Y); if (prevLocation.State == TouchLocationState.Pressed && location.State == TouchLocationState.Released) { if (GetMenuEntryHitBounds(tempButton).Contains(point)) // Execute the button action. I removed the excess } } } } The code for switching the button state is working fine but the code where I want to trigger the action is not. location.State == TouchLocationState.Released mostly ends up being false. (Even after I release the touch, it has a value of TouchLocationState.Moved) And what is more irritating is that it sometimes works! I am really confused and stuck for days now. Is this the right way? If yes then where am I going wrong? Or is there some other more effective way to do this? PS: I also posted this question on stack overflow then realized this question is more appropriate in gamedev. Sorry if it counts as being redundant.

    Read the article

  • Producing a smooth mesh from density cloud and marching cubes

    - by Wardy
    Based on my results from this question I decided to build myself a 3D noise map containing float values in place of my existing boolean point values. The effect I'm trying to produce is something like this, rather than typical rolling hills; which should explain the "missing cubes" in the image below. If I render my density map in normal "minecraft mode" (1 block per point in the density map) varying the size of the cube based on the value in my density map (floats in the range 0 to 1) I get something like this: I'm now happy that I can produce a density map for the marching cubes algorithm (which will need a little tweaking) but for some reason when I run it through my implementation it's not producing what I expect. My problem is that I'm getting something like the first image in this answer to my previous question, when I want to achieve the effect in the second image. Upon further investigation I can't see how marching cubes does the "move vertex along the edge" type logic (i.e. the difference between the two images on my previous link). I see that it does do some interpolation, but I'm not convinced I have the correct understanding of what I think it should do, because the code in question appears to give the same result regardless of whether I use boolean or float values. I took the code from here which is a C# implementation of marching cubes, but instead of using the MarchingCubesPrimitive I modified it to accept an object of type IDrawable, containing lists for the various collections (vertices, normals, UVs, indices), the logic was otherwise untouched. My understanding is that given a very low isovalue the accuracy level of the surface being rendered should increase, so in short "less 45 degree slows more rolling hills" type mesh output. However this isn't what I'm seeing. Have I missed something or is the implementation flawed and need to be fixed? EDIT: A little more detail on what I am seeing when I "marching cube" the data. Ok so firstly, ignore the fact that the meshes created by the chunks don't "connect" (i'll probably raise another question about this later). Then look at the shaping of the island, it's too ... square, from the voxels rendered as boxes you get the impression there's a clean soft gradual hill and yet from the image there are sharp falling edges even in the most central areas where the gradient in the first image looks the most smooth. The data is "regenerated" each time I run this so no 2 islands come out the same, and it's purely random so not based on noise, but still, how can it look so smooth in 1 image and so not smooth in the other?

    Read the article

  • Low coupling and tight cohesion

    - by hidayat
    Of course it depends on the situation. But when a lower lever object or system communicate with an higher level system, should callbacks or events be preferred to keeping a pointer to higher level object? For example, we have a world class that has a member variable vector<monster> monsters. When the monster class is going to communicate with the world class, should I prefer using a callback function then or should I have a pointer to the world class inside the monster class?

    Read the article

  • Pathfinding and BSP with Box2D

    - by Amplify91
    I'm looking into implementing AI in my 2D side-scrolling platformer, and I'm looking into using algorithms such as A*. For many kinds of pathfinding, we need some sort of grid or systems of nodes or polygon areas. My problem is that I am using Box2d for physics and I am not sure how best to create a structure that my AI can use besides placing individual nodes manually (something I really want to avoid) and using some sort of steering behavior. My level design is tile-based with each tile being about half of the height/width of my main character. The tiles are not all square (some are sloped). I'd like to have a system that can see what the terrain looks like for pathfinding and also keep track of the positions of other actors such as enemies. I'd like to avoid directly placing any nodes into my level design except for possible endpoints or goals. This question is related: How do you do AI path following within a 2d physics engine like farseer/box2d?, but it doesn't specify what kind of structure I could use instead of a list of nodes. I'm looking for some kind of grid or type of BSP that I can query for algorithms like A*.

    Read the article

  • Only draw visible objects to the camera in 2D

    - by Deukalion
    I have Map, each map has an array of Ground, each Ground consists of an array of VertexPositionTexture and a texture name reference so it renders a texture at these points (as a shape through triangulation). Now when I render my map I only want to get a list of all objects that are visible in the camera. (So I won't loop through more than I have to) Structs: public struct Map { public Ground[] Ground { get; set; } } public struct Ground { public int[] Indexes { get; set; } public VertexPositionNormalTexture[] Points { get; set; } public Vector3 TopLeft { get; set; } public Vector3 TopRight { get; set; } public Vector3 BottomLeft { get; set; } public Vector3 BottomRight { get; set; } } public struct RenderBoundaries<T> { public BoundingBox Box; public T Items; } when I load a map: foreach (Ground ground in CurrentMap.Ground) { Boundaries.Add(new RenderBoundaries<Ground>() { Box = BoundingBox.CreateFromPoints(new Vector3[] { ground.TopLeft, ground.TopRight, ground.BottomLeft, ground.BottomRight }), Items = ground }); } TopLeft, TopRight, BottomLeft, BottomRight are simply the locations of each corner that the shape make. A rectangle. When I try to loop through only the objects that are visible I do this in my Draw method: public int Draw(GraphicsDevice device, ICamera camera) { BoundingFrustum frustum = new BoundingFrustum(camera.View * camera.Projection); // Visible count int count = 0; EffectTexture.World = camera.World; EffectTexture.View = camera.View; EffectTexture.Projection = camera.Projection; foreach (EffectPass pass in EffectTexture.CurrentTechnique.Passes) { pass.Apply(); foreach (RenderBoundaries<Ground> render in Boundaries.Where(m => frustum.Contains(m.Box) != ContainmentType.Disjoint)) { // Draw ground count++; } } return count; } When I try adding just one ground, then moving the camera so the ground is out of frame it still returns 1 which means it still gets draw even though it's not within the camera's view. Am I doing something or wrong or can it be because of my Camera? Any ideas why it doesn't work?

    Read the article

  • Missing z-axis rotation for transforming between two vectors

    - by Steve Baughman
    I'm trying to rotate a cube so that it's facing up, but am getting hung up on the final implementation details. It now reliably will rotate the x,y axis to the correct side, but the z-axis is never rotating (See photos of before and after rotation). When I'm using the code below I always get '0' for my rotationVector.z. What am I missing here? // Define lookAt vector lookAtVector = GLKVector3Make(0,0,1); // Define axes vectors axes[0] = GLKVector3Make(0,0,1); axes[1] = GLKVector3Make(-1,0,0); axes[2] = GLKVector3Make(0,1,0); axes[3] = GLKVector3Make(1,0,0); axes[4] = GLKVector3Make(0,-1,0); axes[5] = GLKVector3Make(0,0,-1); CGFloat highest_dot = -1.0; GLKVector3 closest_axis; for(int i = 0; i < 6; i++) { // multiply cube's axes by existing matrix GLKVector3 axis = GLKMatrix4MultiplyVector3(matrix, axes[i]); CGFloat dot = GLKVector3DotProduct(axis, lookAtVector); if(dot > highest_dot) { closest_axis = axis; highest_dot = dot; } } GLKVector3 rotationVector = GLKVector3CrossProduct(closest_axis, lookAtVector); // Get angle between vectors CGFloat angle = atan2(GLKVector3Length(rotationVector), GLKVector3DotProduct(closest_axis, lookAtVector)); // normalize the rotation vector rotationVector = GLKVector3Normalize(rotationVector); // Create transform CATransform3D rotationTransform = CATransform3DMakeRotation(angle, rotationVector.x, rotationVector.y, rotationVector.z); // add rotation transform to existing transformation baseTransform = CATransform3DConcat(baseTransform, rotationTransform); return baseTransform; Before 3d Rotation After 3d Rotation Implementation based on this post

    Read the article

  • How do I reconfigure my GLES frame buffer after a rotation?

    - by Panda Pajama
    I am implementing interface rotation for my GLES based game for iOS, written in Xamarin.iOS with OpenTK. I am detecting the rotation by overriding WillRotate, in my UIViewController, and I correctly re-setup all of my projection matrices. However, when drawing a sprite, the image looks a bit blurrier on the landscape version compared to the portrait version, as you can see in the following closeups magnified 10x. Portrait (before rotating) Landscape (after rotating) In both cases, I'm using the same texture with the same sampler, the same shader, and the same GL state. I just changed the order of the parameters in the projection matrix, so the resulting sizes should be exactly the same pixelwise. Since this could be thought of as a window resize, I suppose that the framebuffer has to be recreated to the new size. When working on desktop apps on Direct3D11 (SharpDX), I would have to call swapChain.ResizeBuffers() to do this. I have tried setting AutoResize = true in my iPhoneOSGameView, but then the framebuffer gets clipped as I rotate the interface, and then everything disappears when rotating the interface again. I'm not doing anything strange, my framebuffer initialization is pretty vanilla: int scaling = (int)UIScreen.MainScreen.Scale; DeviceWidth = (int)UIScreen.MainScreen.Bounds.Width * scaling; DeviceHeight = (int)UIScreen.MainScreen.Bounds.Height * scaling; Size = new System.Drawing.Size((int)(DeviceWidth), (int)(DeviceHeight)); Bounds = new System.Drawing.RectangleF(0, 0, DeviceWidth, DeviceHeight); Frame = new System.Drawing.RectangleF(0, 0, DeviceWidth, DeviceHeight); ContextRenderingApi = EAGLRenderingAPI.OpenGLES2; AutoResize = true; LayerRetainsBacking = true; LayerColorFormat = EAGLColorFormat.RGBA8; I get inconsistent results when changing Size, Bounds and Frame on my CreateFrameBuffer override, but since the documentation is so incomplete (it has nothing on Bounds and Frame), I have resorted to randomly changing stuff here and there without really knowing what is going on. There is a similar question which has no answers. However, I don't know if they're experiencing the same problem as I am. Is my supposition that recreating the framebuffer is necessary, correct? If so, does anybody know how to do it correctly in OpenTK for Xamarin.iOS?

    Read the article

  • XNA 4: GetData from Texture2D and Set it into Texture3D with specific order

    - by cubrman
    I am trying to convert my color grading 2d lookup texture into 3d LUT. When I simply use: ColorAtlas.GetData(data); ColorAtlas3D.SetData(data); I get this: I tried building my 2d atlass horizontally but it did not helped - the data was messed up in a different way. So my question is how can I influence the order of the data I get from the 2d atlas and how can I properly pass it into my 3d atlas? Update: I know that I can GetData from a specific Rectangular area and put it into several arrays, but the result is still the same. This is what I tried: Color[] data2D = new Color[0]; for (int i = 0; i < 32; i++) { Color[] data = new Color[32 * 32]; GraphicsDevice.SetRenderTarget(null); ColorAtlas.GetData(0, new Rectangle(0, i*32, 32, 32), data, 0, data.Length); int oldLength = data2D.Length; Array.Resize<Color>(ref data2D, oldLength + data.Length); Array.Copy(data, 0, data2D, oldLength, data.Length); } ColorAtlas3D.SetData(data2D);

    Read the article

  • Convert rotation from Right handed System to left handed

    - by Hector Llanos
    I have Euler angles from a right handed system that I am trying to convert to a left handed system. All the information that I have read online says that to convert it simply multiply the axis and the angle in the correct order and it should work. In other words, Z * Y * X. When I do this what I see in Maya, and in engine still do not match up. This is what I have so far: static Quaternion ConvertToRightHand(Vector3 Euler) { Quaternion x = Quaternion.AngleAxis(-Euler.x, Vector3.right); Quaternion y = Quaternion.AngleAxis(Euler.y, Vector3.up); Quaternion z = Quaternion.AngleAxis(Euler.z, Vector3.forward); return (z * y * x); } Keeping the -Euler.x helps keep the object pointing up correctly, but when I pass ( 0,0,0) to face in the -z, it faces in the +z. Help :/

    Read the article

  • What's a good data structure solution for a scene manager in XNA?

    - by tunnuz
    Hello, I'm playing with XNA for a game project of myself, I had previous exposure to OpenGL and worked a bit with Ogre, so I'm trying to get the same concepts working on XNA. Specifically I'm trying to add to XNA a scene manager to handle hierarchical transforms, frustum (maybe even occlusion) culling and transparency object sorting. My plan was to build a tree scene manager to handle hierarchical transforms and lighting, and then use an Octree for frustum culling and object sorting. The problem is how to do geometry sorting to support transparencies correctly. I know that sorting is very expensive if done on a per-polygon basis, so expensive that it is not even managed by Ogre. But still images from Ogre look right. Any ideas on how to do it and which data structures to use and their capabilities? I know people around is using: Octrees Kd-trees (someone on GameDev forum said that these are far better than Octrees) BSP (which should handle per-polygon ordering but are very expensive) BVH (but just for frustum and occlusion culling) Thank you Tunnuz

    Read the article

  • How do I choose the scaling factor of a 3D game world?

    - by concept3d
    I am making a 3D tank game prototype with some physics simulation, am using C++. One of the decisions I need to make is the scale of the game world in relation to reality. For example, I could consider 1 in-game unit of measurement to correspond to 1 meter in reality. This feels intuitive, but I feel like I might be missing something. I can think of the following as potential problems: 3D modelling program compatibility. (?) Numerical accuracy. (Does this matter?) Especially at large scales, how games like Battlefield have huge maps: How don't they lose numerical accuracy if they use 1:1 mapping with real world scale, since floating point representation tend to lose more precision with larger numbers (e.g. with ray casting, physics simulation)? Gameplay. I don't want the movement of units to feel slow or fast while using almost real world values like -9.8 m/s^2 for gravity. (This might be subjective.) Is it ok to scale up/down imported assets or it's best fit with a world with its original scale? Rendering performance. Are large meshes with the same vertex count slower to render? I'm wondering if I should split this into multiple questions...

    Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >