Search Results

Search found 1821 results on 73 pages for 'inline formset'.

Page 62/73 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Determining the health of a Cisco switch port?

  - by ewwhite

  I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

  Read the article

• Windows Server 2008 Migration - Did I miss something?

  - by DevNULL

  I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

  Read the article

• Email postfix marked as spam by google

  - by Rodrigo Ferrari

  Hello friends, I searched about this question, found some few answers but no idea how to fix, the problem is that I realy dumb with all this! I configured the postfix and done everything how the install how to told. It send the email, but get marked as spam! The header is this one: Delivered-To: [email protected] Received: by 10.223.86.203 with SMTP id t11cs837410fal; Wed, 12 Jan 2011 04:02:21 -0800 (PST) X-pstn-nxpr: disp=neutral, [email protected] X-pstn-nxp: bodyHash=9c6d0c64fa3a4d663c9968e9545c47d77ae0242e, headerHash=1ab8726bd17a23218309165bd20fe6e0911627cd, keyName=4, rcptHash=178929be6ed8451d98a4df01a463784e6c59b3b4, sourceip=174.121.4.154, version=1 Received: by 10.100.190.13 with SMTP id n13mr537609anf.76.1294833740396; Wed, 12 Jan 2011 04:02:20 -0800 (PST) Return-Path: <[email protected]> Received: from psmtp.com ([74.125.245.168]) by mx.google.com with SMTP id w2si1297960anw.132.2011.01.12.04.02.19; Wed, 12 Jan 2011 04:02:20 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 174.121.4.154 as permitted sender) client-ip=174.121.4.154; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 174.121.4.154 as permitted sender) [email protected] Received: from source ([174.121.4.154]) by na3sys010amx168.postini.com ([74.125.244.10]) with SMTP; Wed, 12 Jan 2011 12:02:19 GMT Received: from localhost (server [127.0.0.1]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by brasilyacht.com.br (Postfix) with ESMTP id 87C121290142; Wed, 12 Jan 2011 09:50:29 -0200 (BRST) From: YachtBrasil <[email protected]> Reply-To: Vendas <[email protected]> Cc: YachtBrasil <[email protected]> To: [email protected] Subject: teste Date: Wed, 12 Jan 2011 09:50:29 -0200 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline MIME-Version: 1.0 Message-Id: <[email protected]> X-pstn-2strike: clear X-pstn-neptune: 0/0/0.00/0 X-pstn-levels: (S: 1.96218/99.81787 CV:99.9000 FC:95.5390 LC:95.5390 R:95.9108 P:95.9108 M:97.0282 C:98.6951 ) X-pstn-settings: 3 (1.0000:1.0000) s cv gt3 gt2 gt1 r p m c X-pstn-addresses: from <[email protected]> [db-null] I'm out of ideas on how to fix this, I think it's dns issue, but I have marked the spf inside my tinydns =( Is there anything I can check to know why this email is marked as spam? Any help will be appreciated! Thanks and sorry for my bad english.

  Read the article

• Is my Cisco switch port bad?

  - by ewwhite

  I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

  Read the article

• GMail detecting mail as spam

  - by Petru Toader

  I've been trying for a long time to get our company's mail server send mail that will get accepted by the GMail spam filter. I have managed making it work for Yahoo Mail and Hotmail, sadly GMail is still marking our mails as spam. I have configured DKIM, SPF, DMARC and verified our mail server IP address against blacklists. I also have pasted here the headers GMail gets when we send a mail. Delivered-To: [email protected] Received: by 10.42.215.6 with SMTP id hc6csp107427icb; Wed, 20 Aug 2014 07:34:26 -0700 (PDT) X-Received: by 10.194.100.34 with SMTP id ev2mr59101019wjb.76.1408545265402; Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.phyramid.com (mail.phyramid.com. [178.157.82.23]) by mx.google.com with ESMTPS id dj10si4827754wib.79.2014.08.20.07.34.24 for <[email protected]> (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) client-ip=178.157.82.23; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) [email protected]; dkim=pass [email protected] Received: from localhost (localhost [127.0.0.1]) by mail.phyramid.com (Postfix) with ESMTP id ED2BB2017AC for <[email protected]>; Wed, 20 Aug 2014 17:33:23 +0300 (EEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=phyramid.com; h= content-type:content-type:mime-version:x-mailer:subject:subject :message-id:to:from:from:date:date; s=dkim; t=1408545197; x= 1409409197; bh=e04RtoyF7G39lfCvA9LLhTz4nF64siZtN5IYmC18Xsc=; b=o +6mO8Uz4Uf1G4U2q6tKUiEy2N2n/5R2VtPPwIvBE5xzK/hEd2sDGMxVzQVgIDCsK Q0Xh+auPaQpxldQ+AEcL2XSZMrk/g0mJONjkpI19I5AwGIJCR1SVvxdecohTn9iR bCHzrGi2wAicfDBzOH6lUBNfh2thri79aubdCYc97U= X-Amavis-Modified: Mail body modified (using disclaimer) - mail.phyramid.com X-Virus-Scanned: Debian amavisd-new at mail.phyramid.com Received: from mail.phyramid.com ([127.0.0.1]) by localhost (mail.phyramid.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 3JcgXZAXeFtX for <[email protected]>; Wed, 20 Aug 2014 17:33:17 +0300 (EEST) Received: from whiterock.local (unknown [109.98.21.30]) by mail.phyramid.com (Postfix) with ESMTPSA id 05CAE200280 for <[email protected]>; Wed, 20 Aug 2014 17:33:15 +0300 (EEST) Date: Wed, 20 Aug 2014 17:34:15 +0300 From: Company Mail <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: hey there! X-Mailer: Airmail (247) MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline How was your summer? ---- Thanks a lot!

  Read the article

• XML transform element appearing in wrong place in document

  - by Mike

  I am having some problems with an XML transform and need some help. The stylesheet should iterate through all suffix elements and place the contents without the suffix tag next to the last text node within its first ancestor quote-block element (see desired ouput). It works when only a single suffix is present, but not when 2 are present, when 2 are present it places both suffixes next to each other in the last text node of the first quote-block. Any ideas? I have tried limiting the selections to ancestor::quote-block[1] in various places but that doesn't have the desired effect. Source XML <paragraph> <para> <quote-block> <list prefix-rules="specified"> <item prefix="“B42"> <para id="0a84d149-91b7-4012-ac6d-9f4eb8ed6c37">In June 2000, EME and EWS reached an agreement to negotiate towards a direct contract for coal haulage by rail (on a DIY basis), which would replace the previous indirect E2E arrangements that EME had in place with ECSL. An internal EWS e-mail noted: <quote-block> <quote-para>‘We did the deal with Edison Mission yesterday morning for LBT-Fiddlers @ £[…]/tonne as agreed. This rate until 16th September pending a contract.</quote-para> <quote-para><emphasis strength="strong">Enron are now off our hands so far as Edison are concerned. The Enron flows we have left are to British Energy’s station at Eggborough; from Immingham, Redcar and Hull</emphasis>. Also to Enron’s own power station at Wilton – 250,000 tonnes/year. I think we are stuck Enron [sic] on the Eggborough traffic until next April when British Energy will, hopefully take over their own coal procurement. <emphasis strength="strong">But we have got them out of Fiddlers Ferry and Ferrybridge – a big step forward</emphasis>.’</quote-para> <suffix>(Emphasis added.)</suffix> </quote-block> </para> </item> <item prefix="B43"> <para id="d64a5a72-0a02-476f-9a7b-7c07bbc93a8a">This e-mail is evidence of both EWS’s intent and, indeed, its success in stopping ECSL from carrying out indirect supplies to EME, one of the new generating companies.”</para> </item> </list> <suffix>(emphasis in original)</suffix> </quote-block> </para> </paragraph> Stylesheet <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://xml.sm.com/schema/cases/report" xmlns:sm="http://xml.sm.com/functions" xmlns:saxon="http://saxon.sf.net/" xpath-default-namespace="http://sm.com/schema/cases/report" exclude-result-prefixes="xs sm" version="2.0"> <xsl:output method="xml" indent="no"/> <xsl:template match="/"> <xsl:apply-templates/> </xsl:template> <xsl:template match="*"> <xsl:copy> <xsl:copy-of select="@*"/> <xsl:apply-templates/> </xsl:copy> </xsl:template> <!-- Match quote-blocks with open or close attributes. --> <xsl:template match="*[*:quote-block and descendant::*:suffix]"> <xsl:call-template name="process-quote-block"/> </xsl:template> <!-- Match inline quote with open or close attributes --> <xsl:template match="*[*:quote and descendant::*:suffix]"> <xsl:call-template name="process-quote-block"/> </xsl:template> <!-- Process the quote block --> <xsl:template name="process-quote-block"> <xsl:variable name="quoteBlockCopy"> <xsl:copy-of select="."/> </xsl:variable> <xsl:apply-templates select="$quoteBlockCopy" mode="append-suffix"> <xsl:with-param name="suffix" select="sm:get-suffix-note(.)"/> <xsl:with-param name="end-node" select="sm:get-last-text-node($quoteBlockCopy)"/> </xsl:apply-templates> </xsl:template> <!-- Match quote-blocks with open or close attributes. --> <xsl:template match="*[*:quote-block and descendant::*:suffix][ancestor::*:quote-block[1]]" mode="create-copy"> <xsl:call-template name="process-quote-block"/> </xsl:template> <!-- Match inline quote with open or close attributes --> <xsl:template match="*[*:quote and descendant::*:suffix]" mode="create-copy"> <xsl:call-template name="process-quote-block"/> </xsl:template> <!-- This will match all elements. Just copy and pass through the parameters. --> <xsl:template match="*" mode="append-suffix"> <xsl:param name="suffix"/> <xsl:param name="end-node"/> <xsl:copy> <xsl:copy-of select="@*"/> <xsl:apply-templates mode="append-suffix"> <xsl:with-param name="suffix" select="$suffix"/> <xsl:with-param name="end-node" select="$end-node"/> </xsl:apply-templates> </xsl:copy> </xsl:template> <!-- Apply the text node to the content. If the node is equal to the last node then append the descendants of suffix --> <xsl:template match="text()[normalize-space() != '']" mode="append-suffix"> <xsl:param name="suffix"/> <xsl:param name="end-node"/> <xsl:choose> <xsl:when test="count(. | $end-node) = 1"> <xsl:value-of select="."/> <xsl:apply-templates select="$suffix"/> </xsl:when> <xsl:otherwise> <!-- Or maybe neither. --> <xsl:value-of select="."/> </xsl:otherwise> </xsl:choose> </xsl:template> <!-- Dont copy suffix as --> <xsl:template match="*:suffix" mode="append-suffix"/> <xsl:function name="sm:get-suffix-note"> <xsl:param name="node"/> <xsl:sequence select="$node/descendant::*:suffix/node()"/> </xsl:function> <xsl:function name="sm:get-last-text-node"> <!-- Finds last non-empty text() node, ignoring <suffix> elements that are a child of this specific quote-block. --> <xsl:param name="node"/> <xsl:sequence select="reverse($node//text()[not(ancestor::*:suffix) and normalize-space() != ''])[1]"/> </xsl:function> </xsl:stylesheet> Current Output XML <paragraph> <para> <quote-block> <list prefix-rules="specified"> <item prefix="“B42"> <para id="0a84d149-91b7-4012-ac6d-9f4eb8ed6c37">In June 2000, EME and EWS reached an agreement to negotiate towards a direct contract for coal haulage by rail (on a DIY basis), which would replace the previous indirect E2E arrangements that EME had in place with ECSL. An internal EWS e-mail noted: <quote-block> <quote-para>‘We did the deal with Edison Mission yesterday morning for LBT-Fiddlers @ £[…]/tonne as agreed. This rate until 16th September pending a contract.</quote-para> <quote-para><emphasis strength="strong">Enron are now off our hands so far as Edison are concerned. The Enron flows we have left are to British Energy’s station at Eggborough; from Immingham, Redcar and Hull</emphasis>. Also to Enron’s own power station at Wilton – 250,000 tonnes/year. I think we are stuck Enron [sic] on the Eggborough traffic until next April when British Energy will, hopefully take over their own coal procurement. <emphasis strength="strong">But we have got them out of Fiddlers Ferry and Ferrybridge – a big step forward</emphasis>.’</quote-para> </quote-block> </para> </item> <item prefix="B43"> <para id="d64a5a72-0a02-476f-9a7b-7c07bbc93a8a">This e-mail is evidence of both EWS’s intent and, indeed, its success in stopping ECSL from carrying out indirect supplies to EME, one of the new generating companies.”(Emphasis added.)(emphasis in original)</para> </item> </list> </quote-block> </para> </paragraph> Desired Ouput <paragraph> <para> <quote-block> <list prefix-rules="specified"> <item prefix="“B42"> <para id="0a84d149-91b7-4012-ac6d-9f4eb8ed6c37">In June 2000, EME and EWS reached an agreement to negotiate towards a direct contract for coal haulage by rail (on a DIY basis), which would replace the previous indirect E2E arrangements that EME had in place with ECSL. An internal EWS e-mail noted: <quote-block> <quote-para>‘We did the deal with Edison Mission yesterday morning for LBT-Fiddlers @ £[…]/tonne as agreed. This rate until 16th September pending a contract.</quote-para> <quote-para><emphasis strength="strong">Enron are now off our hands so far as Edison are concerned. The Enron flows we have left are to British Energy’s station at Eggborough; from Immingham, Redcar and Hull</emphasis>. Also to Enron’s own power station at Wilton – 250,000 tonnes/year. I think we are stuck Enron [sic] on the Eggborough traffic until next April when British Energy will, hopefully take over their own coal procurement. <emphasis strength="strong">But we have got them out of Fiddlers Ferry and Ferrybridge – a big step forward</emphasis>.’(Emphasis added.)</quote-para> </quote-block> </para> </item> <item prefix="B43"> <para id="d64a5a72-0a02-476f-9a7b-7c07bbc93a8a">This e-mail is evidence of both EWS’s intent and, indeed, its success in stopping ECSL from carrying out indirect supplies to EME, one of the new generating companies.”(emphasis in original)</para> </item> </list> </quote-block> </para> </paragraph>

  Read the article

• URGENT: IE 6/7/8 problem!- Right Column is not aligned and is pushed down.

  - by Kalpesh Vasta

  Hi Guys, I'm new to this but here goes. I have been developing this website http://www.panelmaster.co.uk and i have managed to solve the majority of design problems but one! If you take a look at the site in IE the right column seems to drop down and is not aligned with the right and centre column. This problem only occurs in IE as upon testing i found it was fine in firefox and safari. I have provided below the CSS for the website. I would appreciate if you guys can help me with the problem asap. Thanks in advance. :) ========================== body { margin: 0; padding: 0; line-height: 1.5em; font-family: Tahoma, Geneva, sans-serif; font-size: 12px; color: #666; background-image: url(images/templatemo_body_top.jpg); background-color: #90857c; background-repeat: repeat-x; background-position: top; text-align: left; } a:link, a:visited { color: #073475; text-decoration: none; font-weight: normal; } a:active, a:hover { color: #073475; text-decoration: underline; } h3 { color: #1e7da9; font-size: 16px; font-weight: bold; } h2 { color: #1e7da9; font-size: 16px; font-weight: bold; } h1 { color: #696969; font-size: 20px; font-weight: bold; } p { margin: 0px; padding: 0px; } img { margin: 0px; padding: 0px; border: none; } .cleaner { clear: both; width: 100%; height: 0px; font-size: 0px; } .cleaner_h30 { clear: both; width:100%; height: 30px; } .cleaner_h40 { clear: both; width:100%; height: 40px; } .float_l { float: left; } .float_r { float: right; } .margin_r20 { margin-right: 20px; } templatemo_body_wrapper { width: 100%; background: url(images/templatemo_body_bottom.png) repeat-x bottom center; } templatemo_wrapper { width: 970px; padding: 0 10px; margin: 0 auto; background: url(images/templatemo_wrapper_top.jpg) no-repeat top center; } /* header */ templatemo_header { clear: both; width: 890px; height: 60px; padding: 20px 40px } templatemo_header #site_title { float: left; padding-top: 15px; } site_title a { font-size: 24px; color: #FFFFFF; font-weight: bold; text-decoration: none; } site_title a:hover { font-weight: bold; text-decoration: none; } site_title a span { display: block; margin-top: 5px; font-size: 14px; color: #fff; font-weight: bold; letter-spacing: 2px; } /* end of header */ /* menu */ templatemo_menu { clear: both; width: 970px; height: 80px; background: url(images/templatemo_menubar.png) no-repeat; } search_box { width: 990px; height: 35px; text-align: right; } search_box form { margin: 0; padding: 5px 40px; } search_box #input_field { height: 20px; width: 300px; color: #000000; font-size: 12px; font-variant: normal; line-height: normal; border: 1px solid #CCCCCC; background: #FFFFFF; } search_box #submit_btn { height: 24px; width: 100px; cursor: pointer; font-size: 12px; text-align: center; vertical-align: bottom; white-space: pre; outline: none; color:#666666; border: 1px solid #CCCCCC; background: #FFFFFF; } templatemo_menu ul { width: 890px; height: 35px; margin: 0; padding: 7px 40px; list-style: none; } templatemo_menu ul li { padding: 0px; margin: 0px; display: inline; } templatemo_menu ul li a { float: left; display: block; margin-right: 40px; font-size: 13px; text-decoration: none; color: #fff; font-weight: normal; outline: none; } templatemo_menu ul li a:hover, #templatemo_menu ul .current { color: #162127; } /* end of menu */ /* contetnt */ templatemo_content_wrapper { clear: both; padding: 0px 0; } templatemo_content { float: left; margin-left: 10px; width: 550px; } banner { margin: 0 0 10px 0; } templatemo_content #content_top { width: 550px; height: 20px; background: url(images/templatemo_content_top.png) no-repeat; } templatemo_content #content_bottom { width: 550px; height: 20px; background: url(images/templatemo_content_bottom.png) no-repeat; } templatemo_content #content_middle { width: 510px; padding: 5px 20px 0px 20px; background: url(images/templatemo_content_middle.png) repeat-y; } content_middle p { text-align: justify; } .templatemo_sidebar_wrapper { width: 200px; } .templatemo_sidebar { width: 197px; padding-right: 3px; background: url(images/templatemo_sidebar_middle.png) repeat-y; } .templatemo_sidebar_top { width: 200px; height: 20px; background: url(images/templatemo_sidebar_top.png) no-repeat; } .templatemo_sidebar_bottom { width: 200px; height: 20px; background: url(images/templatemo_sidebar_bottom.png) no-repeat; } .templatemo_sidebar .sidebar_box { clear: both; padding-bottom: 20px; } .sidebar_box1 { padding: 15px; } .sidebar_box h2 { color: #2d84ad; font-size: 16px; padding-left: 25px; font-weight: bold; margin: 0 0 10px 10px; background: url(images/templatemo_sidebar_h1.jpg) left center no-repeat; } .sidebar_box .sidebar_box_content { padding: 15px; background: url(images/templatemo_sidebar_box_top.png) top repeat-x; } .sidebar_box img { border: 1px solid #999; margin-bottom: 5px; } .sidebar_box .discount { margin: 5px 0 0 0; font-weight: bold; } .sidebar_box .discount span { color: #C00; } .left_sidebar_box .discount a { font-weight: bold; color: #000; } .sidebar_box .categories_list { margin: 0; padding: 0; list-style: none; } .categories_list li { padding: 0; margin: 0; } .categories_list li a { display: block; color: #201f1c; padding: 5px 0 5px 20px; background: url(images/list.png) center left no-repeat; } .categories_list li a:hover { color: #439ac3; text-decoration: none; } .news_box { clear: both; margin-bottom: 5px; padding-bottom: 5px; border-bottom: 1px solid #999; } .news_box h4 { padding: 2px 0; margin: 0; } .news_box h4 a { font-size: 12px; font-weight: normal; color: #1893f2; } newsletter_box label { display: block; margin-bottom: 10px; } newsletter_box .input_field { height: 20px; width: 155px; padding: 0 5px; margin-bottom: 10px; color: #000000; font-size: 12px; font-variant: normal; line-height: normal; } newsletter_box .submit_btn { float: right; height: 30px; width: 80px; margin: 0px; padding: 3px 0 15px 0; cursor: pointer; font-size: 12px; text-align: center; vertical-align: bottom; white-space: pre; outline: none; } .product_box { float: left; width: 223px; padding: 10px; margin-bottom: 20px; border: 1px solid #CCC; text-align: center; } .product_box img { margin-bottom: 10px; } .product_box h3 { color: #2a2522; font-size: 12px; margin: 0 0 10px; } .product_box p { margin-bottom: 10px; } .product_box p span { color: #cf5902; font-size: 14px; font-weight: bold; } .product_box .detail { float: right; } .product_box .addtocard { float: left; font-weight: bold; padding-right: 20px; background: url(images/templatemo_shopping_cart.png) bottom right no-repeat; } /* end of content */ /* footer */ templatemo_footer_wrapper { background: url(images/templatemo_footer.png) repeat-x; } templatemo_footer { width: 910px; height: 85px; padding: 50px 40px 30px 40px; margin: 0 auto; text-align: center; color: #a9a098; } templatemo_footer a { color: #d7d1cc; font-weight: normal; } templatemo_footer a:hover { text-decoration: none; color: #FFFF33; } templatemo_footer .footer_menu { margin: 0 0 30px 0; padding: 0px; list-style: none; } .footer_menu li { margin: 0px; padding: 0 20px; display: inline; border-right: 1px solid #d7d1cc; } .footer_menu li a { color: #d7d1cc; } .footer_menu .last_menu { border: none; } /* end of footer */ /twitter/ twitter_div {border-top: 0px;} twitter_div a {color: #0000ff !important;} twitter_update_list {margin-left: -1em !important; margin-bottom: 0px !important;} twitter_update_list li {list-style-type: none; padding-right: 5px; } twitter_update_list li a {color: #0000ff; padding-right: 5px;} twitter_div {border-bottom: 0px; padding-bottom: 10px; padding-top:6px; padding-right: 5px;} twitter_div a, #twitter_update_list li a {text-decoration: none !important;} twitter_div a:hover, #twitter_update_list li a:hover {text-decoration:underline !important;}

  Read the article

• Right Hand Column Does Not Align Properly in IE6/7/8

  - by Kalpesh Vasta

  Hi Guys, I'm new to this but here goes. I have been developing this website http://www.panelmaster.co.uk and i have managed to solve the majority of design problems but one! If you take a look at the site in IE the right column seems to drop down and is not aligned with the right and centre column. This problem only occurs in IE as upon testing i found it was fine in firefox and safari. I have provided below the CSS for the website. I would appreciate if you guys can help me with the problem. Thanks in advance. :) ========================== body { margin: 0; padding: 0; line-height: 1.5em; font-family: Tahoma, Geneva, sans-serif; font-size: 12px; color: #666; background-image: url(images/templatemo_body_top.jpg); background-color: #90857c; background-repeat: repeat-x; background-position: top; text-align: left; } a:link, a:visited { color: #073475; text-decoration: none; font-weight: normal; } a:active, a:hover { color: #073475; text-decoration: underline; } h3 { color: #1e7da9; font-size: 16px; font-weight: bold; } h2 { color: #1e7da9; font-size: 16px; font-weight: bold; } h1 { color: #696969; font-size: 20px; font-weight: bold; } p { margin: 0px; padding: 0px; } img { margin: 0px; padding: 0px; border: none; } .cleaner { clear: both; width: 100%; height: 0px; font-size: 0px; } .cleaner_h30 { clear: both; width:100%; height: 30px; } .cleaner_h40 { clear: both; width:100%; height: 40px; } .float_l { float: left; } .float_r { float: right; } .margin_r20 { margin-right: 20px; } #templatemo_body_wrapper { width: 100%; background: url(images/templatemo_body_bottom.png) repeat-x bottom center; } #templatemo_wrapper { width: 970px; padding: 0 10px; margin: 0 auto; background: url(images/templatemo_wrapper_top.jpg) no-repeat top center; } /* header */ #templatemo_header { clear: both; width: 890px; height: 60px; padding: 20px 40px } #templatemo_header #site_title { float: left; padding-top: 15px; } #site_title a { font-size: 24px; color: #FFFFFF; font-weight: bold; text-decoration: none; } #site_title a:hover { font-weight: bold; text-decoration: none; } #site_title a span { display: block; margin-top: 5px; font-size: 14px; color: #fff; font-weight: bold; letter-spacing: 2px; } /* end of header */ /* menu */ #templatemo_menu { clear: both; width: 970px; height: 80px; background: url(images/templatemo_menubar.png) no-repeat; } #search_box { width: 990px; height: 35px; text-align: right; } #search_box form { margin: 0; padding: 5px 40px; } #search_box #input_field { height: 20px; width: 300px; color: #000000; font-size: 12px; font-variant: normal; line-height: normal; border: 1px solid #CCCCCC; background: #FFFFFF; } #search_box #submit_btn { height: 24px; width: 100px; cursor: pointer; font-size: 12px; text-align: center; vertical-align: bottom; white-space: pre; outline: none; color:#666666; border: 1px solid #CCCCCC; background: #FFFFFF; } #templatemo_menu ul { width: 890px; height: 35px; margin: 0; padding: 7px 40px; list-style: none; } #templatemo_menu ul li { padding: 0px; margin: 0px; display: inline; } #templatemo_menu ul li a { float: left; display: block; margin-right: 40px; font-size: 13px; text-decoration: none; color: #fff; font-weight: normal; outline: none; } #templatemo_menu ul li a:hover, #templatemo_menu ul .current { color: #162127; } /* end of menu */ /* contetnt */ #templatemo_content_wrapper { clear: both; padding: 0px 0; } #templatemo_content { float: left; margin-left: 10px; width: 550px; } #banner { margin: 0 0 10px 0; } #templatemo_content #content_top { width: 550px; height: 20px; background: url(images/templatemo_content_top.png) no-repeat; } #templatemo_content #content_bottom { width: 550px; height: 20px; background: url(images/templatemo_content_bottom.png) no-repeat; } #templatemo_content #content_middle { width: 510px; padding: 5px 20px 0px 20px; background: url(images/templatemo_content_middle.png) repeat-y; } #content_middle p { text-align: justify; } .templatemo_sidebar_wrapper { width: 200px; } .templatemo_sidebar { width: 197px; padding-right: 3px; background: url(images/templatemo_sidebar_middle.png) repeat-y; } .templatemo_sidebar_top { width: 200px; height: 20px; background: url(images/templatemo_sidebar_top.png) no-repeat; } .templatemo_sidebar_bottom { width: 200px; height: 20px; background: url(images/templatemo_sidebar_bottom.png) no-repeat; } .templatemo_sidebar .sidebar_box { clear: both; padding-bottom: 20px; } .sidebar_box1 { padding: 15px; } .sidebar_box h2 { color: #2d84ad; font-size: 16px; padding-left: 25px; font-weight: bold; margin: 0 0 10px 10px; background: url(images/templatemo_sidebar_h1.jpg) left center no-repeat; } .sidebar_box .sidebar_box_content { padding: 15px; background: url(images/templatemo_sidebar_box_top.png) top repeat-x; } .sidebar_box img { border: 1px solid #999; margin-bottom: 5px; } .sidebar_box .discount { margin: 5px 0 0 0; font-weight: bold; } .sidebar_box .discount span { color: #C00; } .left_sidebar_box .discount a { font-weight: bold; color: #000; } .sidebar_box .categories_list { margin: 0; padding: 0; list-style: none; } .categories_list li { padding: 0; margin: 0; } .categories_list li a { display: block; color: #201f1c; padding: 5px 0 5px 20px; background: url(images/list.png) center left no-repeat; } .categories_list li a:hover { color: #439ac3; text-decoration: none; } .news_box { clear: both; margin-bottom: 5px; padding-bottom: 5px; border-bottom: 1px solid #999; } .news_box h4 { padding: 2px 0; margin: 0; } .news_box h4 a { font-size: 12px; font-weight: normal; color: #1893f2; } #newsletter_box label { display: block; margin-bottom: 10px; } #newsletter_box .input_field { height: 20px; width: 155px; padding: 0 5px; margin-bottom: 10px; color: #000000; font-size: 12px; font-variant: normal; line-height: normal; } #newsletter_box .submit_btn { float: right; height: 30px; width: 80px; margin: 0px; padding: 3px 0 15px 0; cursor: pointer; font-size: 12px; text-align: center; vertical-align: bottom; white-space: pre; outline: none; } .product_box { float: left; width: 223px; padding: 10px; margin-bottom: 20px; border: 1px solid #CCC; text-align: center; } .product_box img { margin-bottom: 10px; } .product_box h3 { color: #2a2522; font-size: 12px; margin: 0 0 10px; } .product_box p { margin-bottom: 10px; } .product_box p span { color: #cf5902; font-size: 14px; font-weight: bold; } .product_box .detail { float: right; } .product_box .addtocard { float: left; font-weight: bold; padding-right: 20px; background: url(images/templatemo_shopping_cart.png) bottom right no-repeat; } /* end of content */ /* footer */ #templatemo_footer_wrapper { background: url(images/templatemo_footer.png) repeat-x; } #templatemo_footer { width: 910px; height: 85px; padding: 50px 40px 30px 40px; margin: 0 auto; text-align: center; color: #a9a098; } #templatemo_footer a { color: #d7d1cc; font-weight: normal; } #templatemo_footer a:hover { text-decoration: none; color: #FFFF33; } #templatemo_footer .footer_menu { margin: 0 0 30px 0; padding: 0px; list-style: none; } .footer_menu li { margin: 0px; padding: 0 20px; display: inline; border-right: 1px solid #d7d1cc; } .footer_menu li a { color: #d7d1cc; } .footer_menu .last_menu { border: none; } /* end of footer */ /*twitter*/ #twitter_div {border-top: 0px;} #twitter_div a {color: #0000ff !important;} #twitter_update_list {margin-left: -1em !important; margin-bottom: 0px !important;} #twitter_update_list li {list-style-type: none; padding-right: 5px; } #twitter_update_list li a {color: #0000ff; padding-right: 5px;} #twitter_div {border-bottom: 0px; padding-bottom: 10px; padding-top:6px; padding-right: 5px;} #twitter_div a, #twitter_update_list li a {text-decoration: none !important;} #twitter_div a:hover, #twitter_update_list li a:hover {text-decoration:underline !important;}

  Read the article

• WPF Databinding- Not your fathers databinding Part 1-3

  - by Shervin Shakibi

  As Promised here is my advanced databinding presentation from South Florida Code camp and also Orlando Code camp. you can find the demo files here. http://ssccinc.com/wpfdatabinding.zip Here is a quick description of the first demos, there will be 2 other Blogposting in the next few days getting into more advance databinding topics.   Example00 Here we have 3 textboxes, The first textbox mySourceElement Second textbox has a binding to mySourceElement and Path= Text <Binding ElementName="mySourceElement" Path="Text"  />   Third textbox is also bound to the Text property but we use inline Binding <TextBlock Text="{Binding ElementName=mySourceElement,Path=Text }" Grid.Row="2" /> Here is the entire XAML     <Grid  >           <Grid.RowDefinitions >             <RowDefinition Height="*" />             <RowDefinition Height="*" />             <RowDefinition Height="*" />         </Grid.RowDefinitions>         <TextBox Name="mySourceElement" Grid.Row="0"                  TextChanged="mySourceElement_TextChanged">Hello Orlnado</TextBox>         <TextBlock Grid.Row="1">                        <TextBlock.Text>                 <Binding ElementName="mySourceElement" Path="Text"  />             </TextBlock.Text>         </TextBlock>         <TextBlock Text="{Binding ElementName=mySourceElement,Path=Text }" Grid.Row="2" />     </Grid> </Window> Example01 we have a slider control, then we have two textboxes bound to the value property of the slider. one has its text property bound, the second has its fontsize property bound. <Grid>      <Grid.RowDefinitions >          <RowDefinition Height="40px" />          <RowDefinition Height="40px" />          <RowDefinition Height="*" />      </Grid.RowDefinitions>      <Slider Name="fontSizeSlider" Minimum="5" Maximum="100"              Value="10" Grid.Row="0" />      <TextBox Name="SizeTextBox"                    Text="{Binding ElementName=fontSizeSlider, Path=Value}" Grid.Row="1"/>      <TextBlock Text="Example 01"                 FontSize="{Binding ElementName=SizeTextBox,  Path=Text}"  Grid.Row="2"/> </Grid> Example02 very much like the previous example but it also has a font dropdown <Grid>      <Grid.RowDefinitions >          <RowDefinition Height="20px" />          <RowDefinition Height="40px" />          <RowDefinition Height="40px" />          <RowDefinition Height="*" />      </Grid.RowDefinitions>      <ComboBox Name="FontNameList" SelectedIndex="0" Grid.Row="0">          <ComboBoxItem Content="Arial" />          <ComboBoxItem Content="Calibri" />          <ComboBoxItem Content="Times New Roman" />          <ComboBoxItem Content="Verdana" />      </ComboBox>      <Slider Name="fontSizeSlider" Minimum="5" Maximum="100" Value="10" Grid.Row="1" />      <TextBox Name="SizeTextBox"      Text="{Binding ElementName=fontSizeSlider, Path=Value}" Grid.Row="2"/>      <TextBlock Text="Example 01" FontFamily="{Binding ElementName=FontNameList, Path=Text}"                 FontSize="{Binding ElementName=SizeTextBox,  Path=Text}"  Grid.Row="3"/> </Grid> Example03 In this example we bind to an object Employee.cs Notice we added a directive to our xaml which is clr-namespace and the namespace for our employee Class xmlns:local="clr-namespace:Example03" In Our windows Resources we create an instance of our object <Window.Resources>     <local:Employee x:Key="MyEmployee" EmployeeNumber="145"                     FirstName="John"                     LastName="Doe"                     Department="Product Development"                     Title="QA Manager" /> </Window.Resources> then we bind our container to the that instance of the data <Grid DataContext="{StaticResource MyEmployee}">         <Grid.RowDefinitions>             <RowDefinition Height="*" />             <RowDefinition Height="*" />             <RowDefinition Height="*" />             <RowDefinition Height="*" />             <RowDefinition Height="*" />         </Grid.RowDefinitions>         <Grid.ColumnDefinitions >             <ColumnDefinition Width="130px" />             <ColumnDefinition Width="178*" />         </Grid.ColumnDefinitions>     </Grid> and Finally we have textboxes that will bind to that textbox         <Label Grid.Row="0" Grid.Column="0">Employee Number</Label>         <TextBox Grid.Row="0" Grid.Column="1" Text="{Binding Path=EmployeeNumber}"></TextBox>         <Label Grid.Row="1" Grid.Column="0">First Name</Label>         <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding Path=FirstName}"></TextBox>         <Label Grid.Row="2" Grid.Column="0">Last Name</Label>         <TextBox Grid.Row="2" Grid.Column="1" Text="{Binding Path=LastName}" />         <Label Grid.Row="3" Grid.Column="0">Title</Label>         <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding Path=Title}"></TextBox>         <Label Grid.Row="4" Grid.Column="0">Department</Label>         <TextBox Grid.Row="4" Grid.Column="1" Text="{Binding Path=Department}" />

  Read the article

• Workaround for datadude deployment bug - NullReferenceException

  - by jamiet

  I have come across a bug in Visual Studio 2010 Database Projects (aka datadude aka DPro aka Visual Studio Database Development Tools aka Visual Studio Team Edition for Database Professionals aka Juneau aka SQL Server Data Tools) that other people may encounter so, for the purposes of googling, I'm writing this blog post about it. Through my own googling I discovered that a Connect bug had already been raised about it (VS2010 Database project deploy - “SqlDeployTask” task failed unexpectedly, NullReferenceException), and coincidentally enough it was raised by my former colleague Tom Hunter (whom I have mentioned here before as the superhuman Tom Hunter) although it has not (at this time) received a reply from Microsoft. Tom provided a repro, namely that this syntactically valid function definition: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN (    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte) would produce this nasty unhelpful error upon deployment: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\TeamData\Microsoft.Data.Schema.TSqlTasks.targets(120,5): Error MSB4018: The "SqlDeployTask" task failed unexpectedly.System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.VariableSubstitution(SqlScriptProperty propertyValue, IDictionary`2 variables, Boolean& isChanged)   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.ArePropertiesEqual(IModelElement source, IModelElement target, ModelPropertyClass propertyClass, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareProperties(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareAllElementsForOneType(ModelElementClass type, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean compareOrphanedElements)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareStore(ModelStore source, ModelStore target, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.Build.SchemaDeployment.CompareModels()   at Microsoft.Data.Schema.Build.SchemaDeployment.PrepareBuildPlan()   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute(Boolean executeDeployment)   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute()   at Microsoft.Data.Schema.Tasks.DBDeployTask.Execute()   at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()   at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult)   Done executing task "SqlDeployTask" -- FAILED.  Done building target "DspDeploy" in project "Lloyds.UKTax.DB.UKtax.dbproj" -- FAILED. Done executing task "CallTarget" -- FAILED.Done building target "DBDeploy" in project It turns out there are a certain set of circumstances that need to be met for this error to occur: The object being deployed is an inline function  (may also exist for multistatement and scalar functions - I haven't tested that) That object includes SQLCMD variable references The object has already been deployed successfully Just to reiterate that last bullet point, the error does not occur when you deploy the function for the first time, only on the subsequent deployment.   Luckily I have a direct line into a guy on the development team so I fired off an email on Friday evening and today (Monday) I received a reply back telling me that there is a simple fix, one simply has to remove the parentheses that wrap the SQL statement. So, in the case of Tom's repro, the function definition simpy has to be changed to: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN --(    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte--) I have commented out the offending parentheses rather than removing them just to emphasize the point. Thereafter the function will deploy fine. I tested this out on my own project this morning and can confirm that this fix does indeed work.   I have been told that the bug CAN be reproduced in the Release Candidate (RC) 0 build of SQL Server Data Tools in SQL Server 2010 so am hoping that a fix makes it in for the Release-To-Manufacturing (RTM) build. Hope this helps @jamiet

  Read the article

• Sublime text 2 syntax highlighter?

  - by BigSack

  I have coded my first custom syntax highlighter for sublime text 2, but i don't know how to install it. It is based on notepad++ highlighter found here https://70995658-a-62cb3a1a-s-sites.googlegroups.com/site/lohanplus/files/smali_npp.xml?attachauth=ANoY7criVTO9bDmIGrXwhZLQ_oagJzKKJTlbNDGRzMDVpFkO5i0N6hk_rWptvoQC1tBlNqcqFDD5NutD_2vHZx1J7hcRLyg1jruSjebHIeKdS9x0JCNrsRivgs6DWNhDSXSohkP1ZApXw0iQ0MgqcXjdp7CkJJ6pY_k5Orny9TfK8UWn_HKFsmPcpp967NMPtUnd--ad-BImtkEi-fox2tjs7zc5LabkDQ%3D%3D&attredirects=0&d=1 <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>fileTypes</key> <array> <string>smali</string> </array> <dict> <key>Word1</key> <string>add-double add-double/2addr add-float add-float/2addr add-int add-int/2addr add-int/lit16 add-int/lit8 add-long add-long/2addr aget aget-boolean aget-byte aget-char aget-object aget-short aget-wide and-int and-int/2addr and-int/lit16 and-int/lit8 and-long and-long/2addr aput aput-boolean aput-byte aput-char aput-object aput-short aput-wide array-length check-cast cmp-long cmpg-double cmpg-float cmpl-double cmpl-float const const-class const-string const-string-jumbo const-wide const-wide/16 const-wide/32 const-wide/high16 const/16 const/4 const/high16 div-double div-double/2addr div-float div-float/2addr div-int div-int/2addr div-int/lit16 div-int/lit8 div-long div-long/2addr double-to-float double-to-int double-to-long execute-inline fill-array-data filled-new-array filled-new-array/range float-to-double float-to-int float-to-long goto goto/16 goto/32 if-eq if-eqz if-ge if-gez if-gt if-gtz if-le if-lez if-lt if-ltz if-ne if-nez iget iget-boolean iget-byte iget-char iget-object iget-object-quick iget-quick iget-short iget-wide iget-wide-quick instance-of int-to-byte int-to-char int-to-double int-to-float int-to-long int-to-short invoke-direct invoke-direct-empty invoke-direct/range invoke-interface invoke-interface/range invoke-static invoke-static/range invoke-super invoke-super-quick invoke-super-quick/range invoke-super/range invoke-virtual invoke-virtual-quick invoke-virtual-quick/range invoke-virtual/range iput iput-boolean iput-byte iput-char iput-object iput-object-quick iput-quick iput-short iput-wide iput-wide-quick long-to-double long-to-float long-to-int monitor-enter monitor-exit move move-exception move-object move-object/16 move-object/from16 move-result move-result-object move-result-wide move-wide move-wide/16 move-wide/from16 move/16 move/from16 mul-double mul-double/2addr mul-float mul-float/2addr mul-int mul-int/2addr mul-int/lit8 mul-int/lit16 mul-long mul-long/2addr neg-double neg-float neg-int neg-long new-array new-instance nop not-int not-long or-int or-int/2addr or-int/lit16 or-int/lit8 or-long or-long/2addr rem-double rem-double/2addr rem-float rem-float/2addr rem-int rem-int/2addr rem-int/lit16 rem-int/lit8 rem-long rem-long/2addr return return-object return-void return-wide rsub-int rsub-int/lit8 sget sget-boolean sget-byte sget-char sget-object sget-short sget-wide shl-int shl-int/2addr shl-int/lit8 shl-long shl-long/2addr shr-int shr-int/2addr shr-int/lit8 shr-long shr-long/2addr sparse-switch sput sput-boolean sput-byte sput-char sput-object sput-short sput-wide sub-double sub-double/2addr sub-float sub-float/2addr sub-int sub-int/2addr sub-int/lit16 sub-int/lit8 sub-long sub-long/2addr throw throw-verification-error ushr-int ushr-int/2addr ushr-int/lit8 ushr-long ushr-long/2addr xor-int xor-int/2addr xor-int/lit16 xor-int/lit8 xor-long xor-long/2addr</string> </dict> <dict> <key>Word2</key> <string>v0 v1 v2 v3 v4 v5 v6 v7 v8 v9 v10 v11 v12 v13 v14 v15 v16 v17 v18 v19 v20 v21 v22 v23 v24 v25 v26 v27 v28 v29 v30 v31 v32 v33 v34 v35 v36 v37 v38 v39 v40 v41 v42 v43 v44 v45 v46 v47 v48 v49 v50 p0 p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30</string> </dict> <dict> <key>Word3</key> <string>array-data .catch .catchall .class .end .end\ local .enum .epilogue .field .implements .line .local .locals .parameter .prologue .registers .restart .restart\ local .source .subannotation .super</string> </dict> <dict> <key>Word4</key> <string>abstract bridge constructor declared-synchronized enum final interface native private protected public static strictfp synchronized synthetic system transient varargs volatile</string> </dict> <dict> <key>Word4</key> <string>(&quot;0)&quot;0</string> </dict> <dict> <key>Word5</key> <string>.method .annotation .sparse-switch .packed-switch</string> </dict> <dict> <key>word6</key> <string>.end\ method .end\ annotation .end\ sparse-switch .end\ packed-switch</string> </dict> <dict> <key>word7</key> <string>&quot; ( ) , ; { } &gt;</string> </dict> <key>uuid</key> <string>27798CC6-6B1D-11D9-B8FA-000D93589AF6</string> </dict> </plist>

  Read the article

• The ugly evolution of running a background operation in the context of an ASP.NET app

  - by Jeff

  If you’re one of the two people who has followed my blog for many years, you know that I’ve been going at POP Forums now for over almost 15 years. Publishing it as an open source app has been a big help because it helps me understand how people want to use it, and having it translated to six languages is pretty sweet. Despite this warm and fuzzy group hug, there has been an ugly hack hiding in there for years. One of the things we find ourselves wanting to do is hide some kind of regular process inside of an ASP.NET application that runs periodically. The motivation for this has always been that a lot of people simply don’t have a choice, because they’re running the app on shared hosting, or don’t otherwise have access to a box that can run some kind of regular background service. In POP Forums, I “solved” this problem years ago by hiding some static timers in an HttpModule. Truthfully, this works well as long as you don’t run multiple instances of the app, which in the cloud world, is always a possibility. With the arrival of WebJobs in Azure, I’m going to solve this problem. This post isn’t about that. The other little hacky problem that I “solved” was spawning a background thread to queue emails to subscribed users of the forum. This evolved quite a bit over the years, starting with a long running page to mail users in real-time, when I had only a few hundred. By the time it got into the thousands, or tens of thousands, I needed a better way. What I did is launched a new thread that read all of the user data in, then wrote a queued email to the database (as in, the entire body of the email, every time), with the properly formatted opt-out link. It was super inefficient, but it worked. Then I moved my biggest site using it, CoasterBuzz, to an Azure Website, and it stopped working. So let’s start with the first stupid thing I was doing. The new thread was simply created with delegate code inline. As best I can tell, Azure Websites are more aggressive about garbage collection, because that thread didn’t queue even one message. When the calling server response went out of scope, so went the magic background thread. Duh, all I had to do was move the thread to a private static variable in the class. That’s the way I was able to keep stuff running from the HttpModule. (And yes, I know this is still prone to failure, particularly if the app recycles. For as infrequently as it’s used, I have not, however, experienced this.) It was still failing, but this time I wasn’t sure why. It would queue a few dozen messages, then die. Running in Azure, I had to turn on the application logging and FTP in to see what was going on. That led me to a helper method I was using as delegate to build the unsubscribe links. The idea here is that I didn’t want yet another config entry to describe the base URL, appended with the right path that would match the routing table. No, I wanted the app to figure it out for you, so I came up with this little thing: public static string FullUrlHelper(this Controller controller, string actionName, string controllerName, object routeValues = null) { var helper = new UrlHelper(controller.Request.RequestContext); var requestUrl = controller.Request.Url; if (requestUrl == null) return String.Empty; var url = requestUrl.Scheme + "://"; url += requestUrl.Host; url += (requestUrl.Port != 80 ? ":" + requestUrl.Port : ""); url += helper.Action(actionName, controllerName, routeValues); return url; } And yes, that should have been done with a string builder. This is useful for sending out the email verification messages, too. As clever as I thought I was with this, I was using a delegate in the admin controller to format these unsubscribe links for tens of thousands of users. I passed that delegate into a service class that did the email work: Func<User, string> unsubscribeLinkGenerator = user => this.FullUrlHelper("Unsubscribe", AccountController.Name, new { id = user.UserID, key = _profileService.GetUnsubscribeHash(user) }); _mailingListService.MailUsers(subject, body, htmlBody, unsubscribeLinkGenerator); Cool, right? Actually, not so much. If you look back at the helper, this delegate then will depend on the controller context to learn the routing and format for the URL. As you might have guessed, those things were turning null after a few dozen formatted links, when the original request to the admin controller went away. That this wasn’t already happening on my dedicated server is surprising, but again, I understand why the Azure environment might be eager to reclaim a thread after servicing the request. It’s already inefficient that I’m building the entire email for every user, but going back to check the routing table for the right link every time isn’t a win either. I put together a little hack to look up one generic URL, and use that as the basis for a string format. If you’re wondering why I didn’t just use the curly braces up front, it’s because they get URL formatted: var baseString = this.FullUrlHelper("Unsubscribe", AccountController.Name, new { id = "--id--", key = "--key--" }); baseString = baseString.Replace("--id--", "{0}").Replace("--key--", "{1}"); Func unsubscribeLinkGenerator = user => String.Format(baseString, user.UserID, _profileService.GetUnsubscribeHash(user)); _mailingListService.MailUsers(subject, body, htmlBody, unsubscribeLinkGenerator); And wouldn’t you know it, the new solution works just fine. It’s still kind of hacky and inefficient, but it will work until this somehow breaks too.

  Read the article

• SharePoint 2010 Hosting :: How to Customize SharePoint 2010 Global Navigation

  - by mbridge

  Requirements - SharePoint Foundation or SharePoint Server 2010 site - SharePoint Designer 2010 Steps 1. The first step in my process was to download from codeplex a starter masterpage http://startermasterpages.codeplex.com/ . 2. Once you downloaded the starter master page, open up your SharePoint site in SharePoint Designer 2010 and on the left in the “Site Objects “ area click on the folder “All Files” and drill down to catalogs >> masterpages . Once you are in the Masterpage folder copy and paste the _starter.master into this folder. 3. The first step in the customization process is to create your custom style sheet. To create your custom style sheet, click on the “all Files” folder and click on “Style Library.” Right click in the style library section and choose Style sheet. Once the style sheet is created, rename it style.css. Now open the style sheet you created in SharePoint Designer. 4. In this next step you will copy and paste the SharePoint core styles for the global navigation into your custom style sheet. Copy and paste the css below into the style sheet and save file .s4-tn{ padding:0px; margin:0px; } .s4-tn ul.static{ white-space:nowrap; } .s4-tn li.static > .menu-item{ /* [ReplaceColor(themeColor:"Dark2")] */ color:#3b4f65; white-space:nowrap; border:1px solid transparent; padding:4px 10px; display:inline-block; height:15px; vertical-align:middle; } .s4-tn ul.dynamic{ /* [ReplaceColor(themeColor:"Light2")] */ background-color:white; /* [ReplaceColor(themeColor:"Dark2-Lighter")] */ border:1px solid #D9D9D9; } .s4-tn li.dynamic > .menu-item{ display:block; padding:3px 10px; white-space:nowrap; font-weight:normal; } .s4-tn li.dynamic > a:hover{ font-weight:normal; /* [ReplaceColor(themeColor:"Light2-Lighter")] */ background-color:#D9D9D9; } .s4-tn li.static > a:hover { /* [ReplaceColor(themeColor:"Accent1")] */ color:#44aff6; text-decoration:underline; } 5. Once you created the style sheet, go back to the masterpage folder and open the _starter.master file and in the Customization category click edit file. 6. Next, when the edit file opens make sure you view it in split view. Now you are going to search for the reference to our custom masterpage in the code. Make sure you are scrolled to the top in the code section and press “ctrl f” on the key board. This will pop up the find and replace tool. In the” find what field”, copy and paste and then click find next. 7. Now, in the code replace You have now referenced your custom style sheet in your masterpage. 8. The next step is to locate your Global Navigation control, make sure you are scrolled to the top in the code section and press “ctrl f” on the key board. This will pop up the find and replace tool. In the” find what field”, copy and paste ID="TopNavigationMenuV4” and then click find next. Once you find ID="TopNavigationMenuV4” , you should see the following block of code which is the global navigation control: ID="TopNavigationMenuV4" Runat="server" EnableViewState="false" DataSourceID="topSiteMap" AccessKey="" UseSimpleRendering="true" UseSeparateCss="false" Orientation="Horizontal" StaticDisplayLevels="1" MaximumDynamicDisplayLevels="1" SkipLinkText="" CssClass="s4-tn" 9. In the global navigation code above you should see CssClass="s4-tn" . As an additional step you can replace "s4-tn" your own custom name like CssClass="MyNav" . If you can the name of the CSS class make sure you update your custom style sheet with the new name, example below: .MyNav{ padding:0px; margin:0px; } .MyNav ul.static{ white-space:nowrap; } 10. At this point you are ready to brand your global navigation. The next step is to modify your style.css with your customizations to the default SharePoint styles. Have fun styling and make sure you save your work often. Hope it helps!!

  Read the article

• Convert a PDF eBook to ePub Format

  - by Matthew Guay

  Would you like to read a PDF eBook on an eReader or mobile device, but aren’t happy with the performance? Here’s how you can convert your PDFs to the popular ePub format so you can easily read them on any device. PDFs are a popular format for eBooks since they render the same on any device and can preserve the exact layout of the print book.  However, this benefit is their major disadvantage on mobile devices, as you often have to zoom and pan back and forth to see everything on the page.  ePub files, on the other hand, are an increasingly popular option. They can reflow to fill your screen instead of sticking to a strict layout style.  With the free Calibre program, you can quickly convert your PDF eBooks to ePub format. Getting Started Download the Calibre installer (link below) for your operating system, and install as normal.  Calibre works on recent versions of Windows, OS X, and Linux.  The Calibre installer is very streamlined, so the install process was quite quick. Calibre is a great application for organizing your eBooks.  It can automatically sort your books by their metadata, and even display their covers in a Coverflow-style viewer. To add an eBook to your library, simply drag-and-drop the file into the Calibre window, or click Add books at the top.  Here you can choose to add all the books from a folder and more. Calibre will then add the book(s) to your library, import the associated metadata, and organize them in the catalog. Convert your Books Once you’ve imported your books into Calibre, it’s time to convert them to the format you want.  Select the book or books you want to convert, and click Convert E-books.  Select whether you want to convert them individually or bulk convert them. The convertor window has lots of options, so you can get your ePub book exactly like you want.  You can simply click Ok and go with the defaults, or you can tweak the settings. Do note that the conversion will only work successfully with PDFs that contain actual text.  Some PDFs are actually images scanned in from the original books; these will appear just like the PDF after the conversion, and won’t be any easier to read. On the first tab, you’ll notice that Calibri will repopulate most of the metadata fields with info from your PDF.  It will also use the first page of the PDF as the cover.  Edit any of the information that may be incorrect, and add any additional information you want associated with the book. If you want to convert your eBook to a different format other than ePub, Calibri’s got you covered, too.  On the top right, you can choose to output the converted eBook into a many different file formats, including the Kindle-friendly MOBI format. One other important settings page is the Structure Detection tab.  Here you can choose to have it remove headers and footers in the converted book, as well as automatically detect chapter breaks. Click Ok when you’ve finished choosing your settings and Calibre will convert the book.  This may take a few minutes, depending on the size of the PDF.  If the conversion seems to be taking too long, you can click Show job details for more information on the progress.   The conversion usually works good, but we did have one job freeze on us.  When we checked the job details, it indicated that the PDF was copy-protected.  Most PDF eBooks, however, worked fine. Now, back in the main Calibri window, select your book and save it to disk.  You can choose to save only the EPUB format, or you can select Save to disk to save all formats of the book to your computer. You can also view the ePub file directly in Calibri’s built-in eBook viewer.  This is the PDF book we converted, and it looks fairly good in the converted format.  It does have some odd line breaks and some misplaced numbers, but on the whole, the converted book is much easier to read, especially on small mobile devices.   Even images get included inline, so you shouldn’t be missing anything from the original eBook. Conclusion Calibri makes it simple to read your eBooks in any format you need. It is a project that is in constant development, and updates regularly adding better stability and features.  Whether you want to ready your PDF eBooks on a Sony Reader, Kindle, netbook or Smartphone, your books will now be more accessible than ever.  And with thousands of free PDF eBooks out there, you’ll be sure to always have something to read. If you’d like some Geeky PDF eBooks, Microsoft Press is offering a number of free PDF eBooks right now.  Check them out at this link (Account Required). Download the Calibre eBook program Similar Articles Productive Geek Tips Format a String as Currency in C#Convert Older Excel Documents to Excel 2007 FormatShare OneNote 2010 Notebooks with OneNote 2007Install an RPM Package on Ubuntu LinuxConvert PDF Files to Word Documents and Other Formats TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

  Read the article

• Microsoft Sql Server driver for Nodejs - Part 2

  - by chanderdhall

  Nodejs, Sql server and Json response with Rest This post is part 2 of Microsoft Sql Server driver for Node js.In this post we will look at the JSON responses from the Microsoft Sql Server driver for Node js. Pre-requisites: If you have read the Part 1 of the series, you should be good. We will be using a framework for Rest within Nodejs - Restify, but that would need no prior learning. Restify: Restify is a simple node module for building RESTful services. It is slimmer than Express. Express is a complete module that has all what you need to create a full-blown browser app. However, Restify does not have additional overhead of templating, rendering etc that would be needed if your app has views. So, as the name suggests it's an awesome framework for building RESTful services and is very light-weight. Set up - You can continue with the same directory or project structure we had in the previous post, or can start a new one. Install restify using npm and you are good to go. npm install restify Go to Server.js and include Restify in your solution. Then create the server object using restify.CreateServer() - SLICK - ha? var restify = require('restify'); var server = restify.createServer(); server.listen(8080, function () { console.log('%s listening at %s', server.name, server.url); }); Then make sure you provide a port for the Server to listen at. The call back function is optional but helps you for debugging purposes. Once you are done, save the file and then go to the command prompt and hit 'node server.js' and you should see the following:   To test the server, go to your browser and type the address 'http://localhost:8080/' and oops you will see an error.   Why is that? - Well because we haven't defined any routes. Let's go ahead and create a route. To begin with I'd like to return whatever is typed in the url after my name and the following code should do it. server.get('/ChanderDhall/:status', function respond(req, res, next) { res.end("hello " + req.params.name + "") }); You can also avoid writing call backs inline. Something like this. function respond(req, res, next) { res.end("Chander Dhall " + req.params.name + ""); } server.get('/hello/:name', respond); Now if you go ahead and type http://localhost:8080/ChanderDhall/LovesNode you will get the response 'Chander Dhall loves node'. NOTE: Make sure your url has the right case as it's case-sensitive. You could have also typed it in as 'server.get('/chanderdhall/:name', respond);' Stored procedure: We've talked a lot about Restify now, but keep in mind the post is about being able to use Sql server with Node and return JSON. To see this in action, let's go ahead and create another route to a list of Employees from a stored procedure. server.get('/Employees', Employees); The following code will return a JSON response.  function Employees(req, res, next) { res.header("Content-Type: application/json"); //Need to specify the Content-Type which is //JSON in our case. sql.open(conn_str, function (err, conn) { if (err) { //Logs an error console.log("Error opening the database connection!"); return; } console.log("before query!"); conn.queryRaw("exec sp_GetEmployees", function (err, results) { if (err) { //Connection is open but an error occurs whileWhat else can be done? May be create a formatter or may be even come up with a hypermedia type but that may upset some pragmatists. Well, that's going to be a totally different discussion and is really not part of this series. Summary: We've discussed how to execute a stored procedure using Microsoft Sql Server driver for Node. Also, we have discussed how to format and send out a clean JSON to the app calling this API.  

  Read the article

• Oracle SQL Developer v3.2.1 Now Available

  - by thatjeffsmith

  Oracle SQL Developer version 3.2.1 is now available. I recommend that everyone now upgrade to this release. It features more than 200 bug fixes, tweaks, and polish applied to the 3.2 edition. The high profile bug fixes submitted by customers and users on our forums are listed in all their glory for your review. I want to highlight a few of the changes though, as I recognize many of you lack the time and/or patience to ‘read the docs.’ That would include me, which is why I enjoy writing these kinds of blog posts. I’m lazy – just like you! No more artificial line breaks between CREATE OR REPLACE and your PL/SQL In versions 3.2 and older, when you pull up your stored procedural objects in our editor, you would see a line break inserted between the CREATE OR REPLACE and then the body of your code. In version 3.2.1, we have removed the line break. 3.1 3.2.1 Trivia Did You Know? The database doesn’t store the ‘CREATE’ or ‘CREATE OR REPLACE’ bit of your PL/SQL code in the database. If we look at the USER_SOURCE view, we can see that the code begins with the object name. So the CREATE OR REPLACE bit is ‘artificial’ The intent is to give you the code necessary to recreate your object – and have it ‘compile’ into the database. We pretty much HAVE to add the ‘CREATE OR REPLACE.’ From now on it will appear inline with the first line of your code. Exporting Tables & Views When exporting data from your tables or views, previous versions of SQL Developer presented a 3 step wizard. It allows you to choose your columns and apply data filters for what is exported. This was kind of redundant. The grids already allowed you to select your columns and apply filters. Wouldn’t it be more intuitive AND efficient to just make the grids behave in a What You See Is What You Get (WYSIWYG) fashion? In version 3.2.1, that is exactly what will happen. The wizard now only has two steps and the grid will export the data and columns as defined in the visible grid. Let the grid properties define what is actually exported! And here is what is pasted into my worksheet: "BREWERY"|"CITY" "3 Brewers Restaurant Micro-Brewery"|"Toronto" "Amsterdam Brewing Co."|"Toronto" "Ball Brewing Company Ltd."|"Toronto" "Big Ram Brewing Company"|"Toronto" "Black Creek Historic Brewery"|"Toronto" "Black Oak Brewing"|"Toronto" "C'est What?"|"Toronto" "Cool Beer Brewing Company"|"Toronto" "Denison's Brewing"|"Toronto" "Duggan's Brewery"|"Toronto" "Feathers"|"Toronto" "Fermentations! - Danforth"|"Toronto" "Fermentations! - Mount Pleasant"|"Toronto" "Granite Brewery & Restaurant"|"Toronto" "Labatt's Breweries of Canada"|"Toronto" "Mill Street Brew Pub"|"Toronto" "Mill Street Brewery"|"Toronto" "Molson Breweries of Canada"|"Toronto" "Molson Brewery at Air Canada Centre"|"Toronto" "Pioneer Brewery Ltd."|"Toronto" "Post-Production Bistro"|"Toronto" "Rotterdam Brewing"|"Toronto" "Steam Whistle Brewing"|"Toronto" "Strand Brasserie"|"Toronto" "Upper Canada Brewing"|"Toronto" JUST what I wanted And One Last Thing Speaking of export, sometimes I want to send data to Excel. And sometimes I want to send multiple objects to Excel – to a single Excel file that is. In version 3.2.1 you can now do that. Let’s export the bulk of the HR schema to Excel, with each table going to it’s own workbook in the same worksheet. Select many tables, put them in in a single Excel worksheet If you try this in previous versions of SQL Developer it will just write the first table to the Excel file. This is one of the bugs we addressed in v3.2.1. Here is what the output Excel file looks like now: Many tables - Many workbooks in an Excel Worksheet I have a sneaky suspicion that this will be a frequently used feature going forward. Excel seems to be the cornerstone of many of our popular features. Imagine that!

  Read the article

• JQuery and the multiple date selector

  - by David Carter

  Overview I recently needed to build a web page that would allow a user to capture some information and most importantly select multiple dates. This functionality was core to the application and hence had to be easy and quick to do. This is a public facing website so it had to be intuitive and very responsive. On the face of it it didn't seem too hard, I know enough juery to know what it is capable of and I was pretty sure that there would be some plugins that would help speed things along the way. I'm using ASP.Net MVC for this project as I really like the control that it gives you over the generated html and javascript. After years of Web Forms development it makes me feel like a web developer again and puts a smile on my face, that can only be a good thing!   The Calendar The first item that I needed on this page was a calender and I wanted the ability to: have the calendar be always visible select/deselect multiple dates at the same time bind to the select/deselect event so that I could update a seperate listing of the selected dates allow the user to move to another month and still have the calender remember any dates in the previous month I was hoping that there was a jQuery plugin that would meet my requirements and luckily there was! The jQuery datepicker does everything I want and there is quite a bit of documentation on how to use it. It makes use of a javascript date library date.js which I had not come across before but has a number of very useful date utilities that I have used elsewhere in the project. As you can see from the image there still needs to be some styling done! But there will be plenty of time for that later. The calendar clearly shows which dates the user has selected in red and i also make use of an unordered list to show the the selected dates so the user can always clearly see what has been selected even if they move to another month on the calendar. The javascript code that is responsible for listening to events on the calendar and synchronising the list look as follows: <script type="text/javascript">     $(function () {         $('.datepicker').datePicker({ inline: true, selectMultiple: true })         .bind(             'dateSelected',             function (e, selectedDate, $td, state) {                                 var dateInMillisecs = selectedDate.valueOf();                 if (state) { //adding a date                     var newDate = new Date(selectedDate);                     //insert the new item into the correct place in the list                     var listitems = $('#dateList').children('li').get();                     var liToAdd = "<li id='" + dateInMillisecs + "' >" + newDate.toString('ddd dd MMM yyyy') + "</li>";                     var targetIndex = -1;                     for (var i = 0; i < listitems.length; i++) {                         if (dateInMillisecs <= listitems[i].id) {                             targetIndex = i;                             break;                         }                     }                     if (targetIndex < 0) {                         $('#dateList').append(liToAdd);                     }                     else {                         $($('#dateList').children("li")[targetIndex]).before(liToAdd);                     }                 }                 else {//removing a date                     $('ul #' + dateInMillisecs).remove();                 }             }         )     }); When a date is selected on the calendar a function is called with a number of parameters passed to it. The ones I am particularly interested in are selectedDate and state. State tells me whether the user has selected or deselected the date passed in the selectedDate parameter. The <ul> that I am using to show the date has an id of dateList and this is what I will be adding and removing <li> items from. To make things a little more logical for the user I decided that the date should be sorted in chronological order, this means that each time a new date is selected it need to be placed in the correct position in the list. One way to do this would be just to append a new <li> to the list and then sort the whole list. However the approach I took was to get an array of all the items in the list var listitems = ('#dateList').children('li').get(); and then check the value of each item in the array against my new date and as soon as I found the case where the new date was less than the current item remember that position in the list as this is where I would insert it later. To make this work easily I decided to store a numeric representation of each date in the list in the id attribute of each <li> element. Fortunately javascript natively stores dates as the number of milliseconds since 1 Jan 1970. var dateInMillisecs = selectedDate.valueOf(); Please note that this is the value of the date in UTC! I always like to store dates in UTC as I learnt a long time ago that it saves a lot of refactoring at a later date... When I convert the dates back to their original back on the server I will need the UTC offset that was used when calculating the dates, this and how to actually serialise the dates and get them posted back will be the subject of another post.

  Read the article

• Breaking through the class sealing

  - by Jason Crease

  Do you understand 'sealing' in C#?  Somewhat?  Anyway, here's the lowdown. I've done this article from a C# perspective, but I've occasionally referenced .NET when appropriate. What is sealing a class? By sealing a class in C#, you ensure that you ensure that no class can be derived from that class.  You do this by simply adding the word 'sealed' to a class definition: public sealed class Dog {} Now writing something like " public sealed class Hamster: Dog {} " you'll get a compile error like this: 'Hamster: cannot derive from sealed type 'Dog' If you look in an IL disassembler, you'll see a definition like this: .class public auto ansi sealed beforefieldinit Dog extends [mscorlib]System.Object Note the addition of the word 'sealed'. What about sealing methods? You can also seal overriding methods.  By adding the word 'sealed', you ensure that the method cannot be overridden in a derived class.  Consider the following code: public class Dog : Mammal { public sealed override void Go() { } } public class Mammal { public virtual void Go() { } } In this code, the method 'Go' in Dog is sealed.  It cannot be overridden in a subclass.  Writing this would cause a compile error: public class Dachshund : Dog { public override void Go() { } } However, we can 'new' a method with the same name.  This is essentially a new method; distinct from the 'Go' in the subclass: public class Terrier : Dog { public new void Go() { } } Sealing properties? You can also seal seal properties.  You add 'sealed' to the property definition, like so: public sealed override string Name {     get { return m_Name; }     set { m_Name = value; } } In C#, you can only seal a property, not the underlying setters/getters.  This is because C# offers no override syntax for setters or getters.  However, in underlying IL you seal the setter and getter methods individually - a property is just metadata. Why bother sealing? There are a few traditional reasons to seal: Invariance. Other people may want to derive from your class, even though your implementation may make successful derivation near-impossible.  There may be twisted, hacky logic that could never be second-guessed by another developer.  By sealing your class, you're protecting them from wasting their time.  The CLR team has sealed most of the framework classes, and I assume they did this for this reason. Security.  By deriving from your type, an attacker may gain access to functionality that enables him to hack your system.  I consider this a very weak security precaution. Speed.  If a class is sealed, then .NET doesn't need to consult the virtual-function-call table to find the actual type, since it knows that no derived type can exist.  Therefore, it could emit a 'call' instead of 'callvirt' or at least optimise the machine code, thus producing a performance benefit.  But I've done trials, and have been unable to demonstrate this If you have an example, please share! All in all, I'm not convinced that sealing is interesting or important.  Anyway, moving-on... What is automatically sealed? Value types and structs.  If they were not always sealed, all sorts of things would go wrong.  For instance, structs are laid-out inline within a class.  But what if you assigned a substruct to a struct field of that class?  There may be too many fields to fit. Static classes.  Static classes exist in C# but not .NET.  The C# compiler compiles a static class into an 'abstract sealed' class.  So static classes are already sealed in C#. Enumerations.  The CLR does not track the types of enumerations - it treats them as simple value types.  Hence, polymorphism would not work. What cannot be sealed? Interfaces.  Interfaces exist to be implemented, so sealing to prevent implementation is dumb.  But what if you could prevent interfaces from being extended (i.e. ban declarations like "public interface IMyInterface : ISealedInterface")?  There is no good reason to seal an interface like this.  Sealing finalizes behaviour, but interfaces have no intrinsic behaviour to finalize Abstract classes.  In IL you can create an abstract sealed class.  But C# syntax for this already exists - declaring a class as a 'static', so it forces you to declare it as such. Non-override methods.  If a method isn't declared as override it cannot be overridden, so sealing would make no difference.  Note this is stated from a C# perspective - the words are opposite in IL.  In IL, you have four choices in total: no declaration (which actually seals the method), 'virtual' (called 'override' in C#), 'sealed virtual' ('sealed override' in C#) and 'newslot virtual' ('new virtual' or 'virtual' in C#, depending on whether the method already exists in a base class). Methods that implement interface methods.  Methods that implement an interface method must be virtual, so cannot be sealed. Fields.  A field cannot be overridden, only hidden (using the 'new' keyword in C#), so sealing would make no sense.

  Read the article

• Defining scope for Record Count functoid:

  - by ArunManick

  Defining scope for Record Count functoid: Problem: One of the most common scenarios in BizTalk is calculating the record count of repeating structure. BizTalk has come up with an advanced functoid called Record Count functoid which will give the record count for the repeating structure however you cannot define the scope for a Record Count functoid. Because Record Count functoid accepts exactly one parameter which can be repeating record or field element.   If somebody don’t know what “scope” means I will explain with a simple example. Consider that we have a source schema having a structure Country -> State -> City. Country will have various states and each state will have different cities. Now you want to calculate no. of cities present in each state. Here scope is defined at the parent node “State”. Traditional Record Count functoid will give the total no. of cities present in the source message and not the State level city count.   Source Schema:   Destination Schema:   Soultion #1: As the title indicates we are not going to add one more parameter to the record count functoid. Instead of that, we are going to achieve the solution with the help of Scripting functoid with Inline XSLT script. XSLT is basically the transformation language used in the mapping.     “No.OfCities” indicates the destination field name to which we are going to send the value. In count(City), “count” refers to built in XPath function used in XSLT and “City” refers to source schema record name. Here you can find the list of built-in functions available in XSLT.   The mapping will look like as follows:   The 2 Record Count functoids used in this map will give the total number of states and total number of cities as that of input message.   Soultion #2:  If someone doesn’t like XSLT code and they wish to achieve the solution using functoids alone, then here is another solution.   Use logical Existence functoid to check whether “City” exist or not Connect the output of Logical Existence functoid to the Value Mapping functoid with second parameter as constant “1”. Hence if the first parameter is TRUE it will give the output as “1”. Connect the output of Value Mapping functoid to the Cumulative Sum functoid with scope as “1”   This will calculate the City count at the state level. The mapping will look like as follows:     Let us see the sample input and the map output.   Input: <?xml version="1.0" encoding="utf-8"?> <ns0:Country xmlns:ns0="http://RecordCount.Source">   <State>     <StateName>Tamilnadu</StateName>     <City>       <CityName>Pollachi</CityName>     </City>     <City>       <CityName>Coimbatore</CityName>     </City>     <City>       <CityName>Chennai</CityName>     </City>   </State>   <State>     <StateName>Kerala</StateName>     <City>       <CityName>Palakad</CityName>     </City>   </State>   <State>     <StateName>Karnataka</StateName>     <City>       <CityName>Bangalore</CityName>     </City>     <City>       <CityName>Mangalore</CityName>     </City>   </State> </ns0:Country>     Output: <ns0:Country xmlns:ns0="http://RecordCount.Destination">           <No.OfStates>3</No.OfStates>           <No.OfCities>6</No.OfCities>           <States>                    <No.OfCities>3</No.OfCities>           </States>           <States>                    <No.OfCities>1</No.OfCities>           </States>           <States>                    <No.OfCities>2</No.OfCities>           </States> </ns0:Country>   Conclusion: This is my first post and I hope you enjoyed it.   -Arun

  Read the article

• CSS3 - "connecting" 2 classes animation [closed]

  - by Nave Tseva

  I have this CSS +HTML code: <!DOCTYPE HTML> <html> <head> <meta http-equiv="content-type" content="text/html; charset=UTF-8" /> <title>What</title> <style type="text/css"> #page { width: 900px; padding: 0px; margin: 0 auto; direction: rtl; position: relative; } #box1 { position: relative; width: 500px; border: 1px solid black; box-shadow: -3px 8px 34px #808080; border-radius: 20px; box-shadow: -8px 5px 5px #888888; right: 300px; top: 250px; height: 150px; -webkit-transition: all 1s; font-size: large; color: Black; padding: 10px; background: #D0D0D0; opacity: 0; } @-webkit-keyframes myFirst { 0% { right: 300px; top: 150px; background: #D0D0D0; opacity: 0; } 100% { background: #909090; ; right: 300px; top: 200px; opacity: 1; } } #littlebox1 { top: 200px; position: absolute; display: inline-block; } .littlebox1-sentence { font-size: large; padding-bottom: 15px; padding-top: 15px; padding-left: 25px; padding-right: 10px; background: #D0D0D0; border-radius: 10px; -webkit-transition: background .25s ease-in-out; } #littlebox1:hover ~ #box1 { -webkit-transition: all 0s; background: #909090;; right: 300px; top: 200px; -webkit-animation: myFirst 1s; -webkit-animation-fill-mode: initial; opacity: 1; } .littlebox1-sentence:hover { background: #909090; } .littlebox1-sentence:hover + .triangle { border-right: 50px solid #909090; } .triangle { position: relative; width: 0; height: 0; border-right: 50px solid #D0D0D0; border-top: 24px solid transparent; border-bottom: 24px solid transparent; right: 160px; -webkit-transition: border-right .25s ease-in-out; } .triangle:hover { border-right:50px solid #909090; } </style> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script> <script> $(function() { $('.littlebox1-sentence').hover(function() { $(this).css('background', '#909090'); $('.triangle').css('border-right', '50px solid #909090'); }); </script> <script> $(function() { $('.triangle').hover(function() { $(this).css('border-right', '50px solid #909090'); $('.littlebox1-sentence').css('background', '#909090'); }); </script> </head> <body dir="rtl"> <div id="page"> <div id="littlebox1" class="littlebox1-sentence">put your mouse here</div><div id="littlebox1" class="triangle"> </div> <div id="box1"> </div> </div> </body> </html> Live example you will find here: http://jsfiddle.net/FLe4g/12/ The problem here that something here wrong in the second jquery code. I want that every time that I put the mouse on the box, or on the triangke they both will change ther color together. when I put the mouse on the box it works fine, but when I put the mouse on the triangle it don't work. Any suggestions how to fix this code?

  Read the article

• Solaris 11.1 changes building of code past the point of __NORETURN

  - by alanc

  While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

  Read the article

• Notes from AT&T ARO Session at Oredev 2013

  - by Geertjan

  The mobile internet is 12 times bigger than internet was 12 years ago. Explosive growth, faster networks, and more powerful devices. 85% of users prefer mobile apps, while 56% have problems. Almost 60% want less than 2 second mobile app startup. App with poor mobile experience results in not buying stuff, going to competitor, not liking your company. Battery life. Bad mobile app is worse than no app at all because it turns people away from brand, etc. Apps didn't exist 10 years ago, 72 billion dollars a year in 2013, 151 billion in 2017.Testing performance. Mobile is different than regular app. Need to fix issues before customers discover them. ARO is free and open source AT&T tool for identifying mobile app performance problems. Mobile data is different -- radio resource control state machine. Radio resource control -- radio from idle to continuous reception -- drains battery, sends data, packets coming through, after packets come through radio is still on which is tail time, after 10 seconds of no data coming through radio goes off. For example, YouTube, e.g., 10 to 15 seconds after every connection, can be huge drain on battery, app traffic triggers RRC state. Goal. Balance fast network connectivity against battery usage. ARO is free and open source and test any platform and won awards. How do I test my app? pcap or tcdump network. Native collector: Android and iOS. Android rooted device is needed. Test app on phone, background data, idle for ads and analytics. Graded against 25 best practices. See all the processes, all network traffic mapped to processes, stats about trace, can look just at your app, exlude Facebook, etc. Many tests conducted, e.g., file download, HTML (wrapped applications, e.g., cordova). Best Practices. Make stuff smaller. GZIP, smaller files, download faster, best for files larger than 800 bytes, minification -- remove tabs and commenting -- browser doesn't need that, just give processor what it needs remove wheat from chaff. Images -- make images smaller, 1024x1024 image for a checkmark, swish it, make it 33% smaller, ARO records the screen, probably could be 9 times smaller. Download less stuff. 17% of HTTP content on mobile is duplicate data because of caching, reloading from cache is 75% to 99% faster than downloading again, 75% possible savings which means app will start up faster because using cache -- everyone wants app starting up 2 seconds. Make fewer HTTP requests. Inline and combine CSS and JS when possible reduces the number of requests, spread images used often. Fewer connections. Faster and use less battery, for example, download an image every 60 secs, download an add every 60 seconds, send analytics every 60 seconds -- instead of that, use transaction manager, download everything at once, reduce amount of time connected to network by 40% also -- 80% of applications do NOT close connections when they are finished, e.g., download picture, 10 seconds later the radio turns off, if you do not explicitly close, eventually server closes, 38% more tail time, 40% less energy if you close connection right away, background data traffic is 27% of data and 55% of network time, this kills the battery. Look at redirection. Adds 200 to 600 ms on each connection, waterfall diagram to all the requests -- e.g., xyz.com redirect to www.xyz.com redirect to xyz.mobi to www.xyz.com, waterfall visualization of packets, minimize redirects but redirects are fine. HTML best practices. Order matters and hiding code (JS downloading blocks rendering, always do CSS before JS or JS asynchronously, CSS 'display:none' hides images from user but the browser downloads them which adds latency to application. Some apps turn on GPS for no reason. Tell network when down, but maybe some other app is using the radio at the same time. It's all about knowing best practices: everyone wins with ARO (carriers, e.g., AT&T, developers, customers). Faster apps, better battery usage, network traffic better, better app reviews, happier customers. MBTA app, referenced as an example.ARO is free, open source, can test all platforms.

  Read the article

• Android - How do I load a contact Photo?

  - by PaulH

  I'm having trouble loading a photo for a contact in Android. I've googled for an answer, but so far have come up empty. Does anyone have an example of querying for a Contact, then loading the Photo? So, given a contactUri which comes from an Activity result called using startActivityForResult(new Intent(Intent.ACTION_PICK,ContactsContract.CommonDataKinds.Phone.CONTENT_URI),PICK_CONTACT_REQUEST) is: content://com.android.contacts/data/1557 The loadContact(..) works fine. However when I call the getPhoto(...) method, I get a null value for the photo InputStream. It is also confusing because the URI values are different. The contactPhotoUri evaluates to: content://com.android.contacts/contacts/1557 See the comments inline in the code below. class ContactAccessor { /** * Retrieves the contact information. */ public ContactInfo loadContact(ContentResolver contentResolver, Uri contactUri) { //contactUri --> content://com.android.contacts/data/1557 ContactInfo contactInfo = new ContactInfo(); // Load the display name for the specified person Cursor cursor = contentResolver.query(contactUri, new String[]{Contacts._ID, Contacts.DISPLAY_NAME, Phone.NUMBER, Contacts.PHOTO_ID}, null, null, null); try { if (cursor.moveToFirst()) { contactInfo.setId(cursor.getLong(0)); contactInfo.setDisplayName(cursor.getString(1)); contactInfo.setPhoneNumber(cursor.getString(2)); } } finally { cursor.close(); } return contactInfo; // <-- returns info for contact } public Bitmap getPhoto(ContentResolver contentResolver, Long contactId) { Uri contactPhotoUri = ContentUris.withAppendedId(Contacts.CONTENT_URI, contactId); // contactPhotoUri --> content://com.android.contacts/contacts/1557 InputStream photoDataStream = Contacts.openContactPhotoInputStream(contentResolver,contactPhotoUri); // <-- always null Bitmap photo = BitmapFactory.decodeStream(photoDataStream); return photo; } public class ContactInfo { private long id; private String displayName; private String phoneNumber; private Uri photoUri; public void setDisplayName(String displayName) { this.displayName = displayName; } public String getDisplayName() { return displayName; } public void setPhoneNumber(String phoneNumber) { this.phoneNumber = phoneNumber; } public String getPhoneNumber() { return phoneNumber; } public Uri getPhotoUri() { return this.photoUri; } public void setPhotoUri(Uri photoUri) { this.photoUri = photoUri; } public long getId() { return this.id; } public void setId(long id) { this.id = id; } } } Clearly, I'm doing something wrong here, but I can't seem to figure out what the problem is. Thanks.

  Read the article

• FileUpload and UpdatePanel: ScriptManager.RegisterPostBackControl works the second time.

  - by VansFannel

  Hello. I'm developing an ASP.NET application with C# and Visual Studio 2008 SP1. I'm using WebForms. I have an ASPX page with two UpdatePanels, one on the left that holds a TreeView and other on the right where I load dynamically user controls. One user control, that I used on right panel, has a FileUpload control and a button to save that file on server. The ascx code to save control is: <asp:UpdatePanel ID="UpdatePanelBotons" runat="server" RenderMode="Inline" UpdateMode="Conditional"> <ContentTemplate> <asp:Button ID="Save" runat="server" Text="Guardar" onclick="Save_Click" CssClass="button" /> </ContentTemplate> <Triggers> <asp:PostBackTrigger ControlID="Save" /> </Triggers> </asp:UpdatePanel> I make a full postback to upload the file to the server and save it to database. But I always getting False on FileUpload.HasFile. I problem is the right UpdatePanel. I need it to load dynamically the user controls. This panel has three UpdatePanels to load the three user controls that I use. Maybe I can use an Async File Uploader or delete the right Update Panel and do a full postback to load controls dynamically. Any advice? UPDATE: RegisterPostBackControl works... the second time I click on save button. First time FileUpload.HasFile is FALSE, and second time is TRUE. Second Update On first click I also check ScriptManager.IsInAsyncPostBack and is FALSE. I don't understand ANYTHING!! Why? The code to load user control first time, and on each postback is: DynamicControls.CreateDestination ud = this.LoadControl(ucUrl) as DynamicControls.CreateDestination; if (ud != null) { Button save = ud.FindControl("Save") as Button; if (save != null) ScriptManager1.RegisterPostBackControl(save); PanelDestination.Controls.Add(ud); } Thank you.

  Read the article

• getDate with Jquery Datepicker

  - by matt

  i am trying to get date from my implementation of jquery date picker, add it to a string and display the resulting image in my div. Something however is just not working. Can anyone check out the code and have a look at it? The code is supposed to take the date from date picker, combine it in a string which is to have the necessary code to display tag, images are located in /image and in the format aYY-MM-DD.png, new to this date picker and can't quite get it down yet. <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <link type="text/css" href="css/ui-lightness/jquery-ui-1.8.custom.css" rel="stylesheet" /> <script type="text/javascript" src="js/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="js/jquery-ui-1.8.custom.min.js"></script> <script type="text/javascript"> $(function(){ // Datepicker $('#datepicker').datepicker({ dateFormat: 'yy-mm-dd', inline: true, minDate: new Date(2010, 1 - 1, 1), maxDate:new Date(2010, 12 - 1, 31), altField: '#datepicker_value', }); //hover states on the static widgets $('#dialog_link, ul#icons li').hover( function() { $(this).addClass('ui-state-hover'); }, function() { $(this).removeClass('ui-state-hover'); } ); }); //var img_date = .datepicker('getDate'); var day1 = $("#datepicker").datepicker('getDate').getDate(); var month1 = $("#datepicker").datepicker('getDate').getMonth() + 1; var year1 = $("#datepicker").datepicker('getDate').getFullYear(); var fullDate = year1 + "-" + month1 + "-" + day1; var str_output = "<h1><center><img src=\"/images/a" + fullDate + ".png\"></center></h1><br/><br>"; page_output.innerHTML = str_output; // writing the results to the div element (page_out) </script> </head> <body style="background-color:#000;color:#fff;margin: auto auto;"> <!-- Datepicker --> <div id="datepicker"></div> <!-- Highlight / Error --> <p>Date Value: <input type="text" id="datepicker_value" /></p> <div id="page_output" style="text-align:center; margin-top:80px; margin-bottom:20px; "></div> </body>

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >