16 bit animation - Page 63

Learning resource for 3d modeling

- by Maik Klein

I want to start learning 3d modeling. I already have experience with maya and 3dsmax but I made a long pause (2 years) Now I have free access to maya, 3dsmax and blender (I am a student). I know that all tools are very powerful so I thought I just pick the one with the best learning materials. The best site that I found is http://www.digitaltutors.com/11/index.php and it has over 7600 videos for maya. Maybe you can recommend me some other learning sites that are as good as digitaltutors?

Read the article

Making a full-screen animation on Android? Should I use OPENGL?

- by Roger Travis

Say I need to make several full-screen animation that would consist of about 500+ frames each, similar to the TalkingTom app ( https://play.google.com/store/apps/details?id=com.outfit7.talkingtom2free ). Animation should be playing at a reasonable speed - supposedly not less, then 20fps - and pictures should be of a reasonable quality, not overly compressed. What method do you think should I use? So far I tried: storing each frame as a compressed JPEG before animation starts, loading each frame into a byteArray as the animation plays, decode corresponding byteArray into a bitmap and draw it on a surface view. Problem - speed is too low, usually about 5-10 FPS. I have thought of two other options. turning all animations into one movie file... but I guess there might be problems with starting, pausing and seeking to the exactly right frame... what do you think? another option I thought about was using OPENGL ( while I never worked with it before ), to play animation frame by frame. What do you think, would opengl be able to handle it? Thanks!

Read the article

8GB, but have to run Windows Xp (32 Bit). Anything I can do with the additional memory?

- by user12889

I ordered a new computer with 8GB RAM with the plan to run Windows 7, 64Bit. Turns out now, that I need to run a 32Bit OS (XP or 7) due to some software which does not run on 64Bit yet (not even with any of the available compatibility settings / modes). Is there anything I can do with the memory above 4GB in this scenario? I'm willing to consider creative solutions like running a hypervisor under XP that offers the memory as a RAM-Disk for swapping etc. ? The software that does not run on 64Bit is CISCO VPN (there seems to be a half-working solution for that) and CISCO IP phone / webcam integration "CISCO Unified Video Advantage" (there is apparently no solution for that).

Read the article

Dealing with "jumping" sprites: badly centered?

- by GigaBass

Thing is, I've used darkFunction Editor as a way to get all the spriteCoordinates off a spriteSheet for each individual sprite, and parse the .xml it generates inside my game. It all works fine, except when the sprites are all similarly sized, but when a sprite changes from a small sprite into a big one, such as here: When from walking from some direction, to attacking, it starts "jumping", appearing glitchy, because it's not staying in the same correct position, only doing so for the right attacking sprite, due to the drawing being made from the lower left part of the rectangle. I think someone experienced will immediately recognize the problem I mean, if not, when I return home soon, I will shoot a little youtube video demonstrating the issue! So the question is: what possible solutions are there? I've thought that some sort of individual frame "offset" system might be the answer, or perhaps splitting, in this case, the sprite in 2: the sword, and the character itself, and draw sword according to character's facing, but that might be overly complex. Another speculation would be that there might be some sort of method in LibGdx, the library I'm using, that allows me to change the drawing center (which I looked for and didn't find), so I could choose from where the drawing starts.

Read the article

MIXing it Up a Bit

- by andrewbrust

Another March, another MIX. For the fifth year running now, Microsoft has chosen to put on a conference aimed less at software development, per se, and more at the products, experiences and designs that software development can generate. In all four prior MIX events, the focus of the show, its keynotes and breakout sessions has been on Web products. On day 1 of MIX 2010 that focus shifted to Windows Phone 7 Series (WP7). What little we had seen of WP7 had been shown to us in a keynote presentation, given by Microsoft’s Joe Belfiore, at the Mobile World Congress in Barcelona, Spain last month. And today, Mr. Belfiore reprised his showmanship for the MIX 2010 audience. Joe showed us the ins and outs of WP7 and, in a breakout session, even gave us a sneak peek of Office (specifically, Excel) on WP7. We didn’t get to see that one month ago in Barcelona, nor did get to see email messages opened for reading, which we saw today. But beyond a tour of the phone itself, impressive though that is, we got to see apps running on it. Those apps included Associated Press news, Seesmic (a major Twitter client) and Foursquare (a social media darling). All three ran, ran well, and looked markedly different and better from their corresponding versions on iPhone and Android. And the games we saw looked even better. To me though, the best demos involved the creation of WP7 apps, using Silverlight in Visual Studio and Expression Blend. These demos were so effective because they showed important apps being built in very few steps, and by Microsoft executives to boot. Scott Guthrie showed us how to build a Twitter API app in Visual Strudio. Jon Harris showed us how to build a photo management and viewer application in Expression Blend, using virtually no code. Demos of apps built from scratch to F5 without the benefit of a teacher, could be challenging. But they went off fine, without a hitch and without a ton of opaque, generated code. Everything written, be it C# or XAML, was easily understood, and the results were impressive. That means lots of developers can do this, and I think it means a lot will. What I’ve seen, thus far, of iPhone and Android development looks very tedious by comparison. Development for those platforms involve a collection of tools that integrate only to a point. Dev work for WP7 involves use of Visual Studio, Silverlight and the same debugging experience .NET developers already know. This was very exciting for me. All the demos harkened back to days of building apps for with Visual Basic…design the front-end, put in code-behind and then hit F5. And that makes sense, because the phone platform, and the PC of the early 90s are both, essentially, client OS machines. The Web was minimal and the “device” was everything. Same is true of this phone. It’s a client app contraption that fits in your pocket. And if the platforms are comparable, hopefully so too will be the draw of ease-of-development. WP7 has the potential to make mobile developers want to switch over, and to convince enterprise developers to get into the phone scene. Will this propel the new phone platform to new heights, and restore Microsoft’s competiveness in the mobile arena? I hope so. I think so. And if Microsoft uses developers to build themselves a victory, that would be beneficial and would show that Microsoft has learned from its failures, as well as its successes. Today I saw a few beautiful apps. Tomorrow I hope I see a slew of others; maybe not as polished, but plentiful, attractive and stable. That would be a victory for Microsoft, and for developers. And it would show everyone else that developers are the kingmakers. They need cheap, efficient dev tools and lots of respect. Microsoft has always been the company to provide that. Hopefully, with WP7, they will return to that persona and see how very timeless it is.

Read the article

Patch an Existing NK.BIN

- by Kate Moss' Open Space

As you know, we can use MAKEIMG.EXE tool to create OS Image file, NK.BIN, or ROMIMAGE.EXE with a BIB for more accurate. But what if the image file is already created but need to be patched or you want to extract a file from NK.BIN? The Platform Builder provide many useful command line utilities, and today I am going to introduce one, BINMOD.EXE. http://msdn.microsoft.com/en-us/library/ee504622.aspx is the official page for BINMOD tool. As the page says, The BinMod Tool (binmod.exe) extracts files from a run-time image, and replaces files in a run-time image and its usage binmod [-i imagename] [-r replacement_filename.ext | -e extraction_filename.ext] This is a simple tool and is easy to use, if we want to extract a file from nk.bin, just type binmod –i nk.bin –e filename.ext And that's it! Or use can try -r command to replace a file inside NK.BIN. The small tool is good but there is a limitation; due to the files in MODULES section are fixed up during ROMIMAGE so the original file format is not preserved, therefore extract or replace file in MODULE section will be impossible. So just like this small tool, this post supposed to be end here, right? Nah... It is not that easy. Just try the above example, and you will find, the tool is not work! Double check the file is in FILES section and the NK.BIN is good, but it just quits. Before you throw away this useless toy, we can try to fix it! Yes, the source of this tool is available in your CE6, private\winceos\COREOS\nk\tools\romimage\binmod. As it is a tool run in your Windows so you need to Windows SDK or Visual Studio to build the code. (I am going to save you some time by skipping the detail as building a desktop console mode program is fairly trivial) The cbinmod.cpp is the core logic for this program and follow up the error message we got, it looks like the following code is suspected. // // Extra sanity check... // if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast && (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast) { dprintf("Found pTOC = 0x%08x\n", (DWORD)dwpTOC); fFoundIt = true; break; } else { dprintf("NOTICE! Record %d looked like a TOC except DLL first = 0x%08X, and DLL last = 0x%08X\r\n", i, pTOCLoc->dllfirst, pTOCLoc->dlllast); } The logic checks if dllfirst <= dlllast but look closer, the code only separated the high/low WORD from dllfirst but does not apply the same to dlllast, is that on purpose or a bug? While the TOC is created by ROMIMAGE.EXE, so let's move to ROMIMAGE. In private\winceos\coreos\nk\tools\romimage\romimage\bin.cpp Module::s_romhdr.dllfirst = (HIWORD(xip_mem->dll_data_bottom) << 16) | HIWORD(xip_mem->kernel_dll_bottom); Module::s_romhdr.dlllast = (HIWORD(xip_mem->dll_data_top) << 16) | HIWORD(xip_mem->kernel_dll_top); It is clear now, the high word of dll first is the upper 16 bits of XIP DLL bottom and the low word is the upper 16 bits of kernel dll bottom; also, the high word of dll last is the upper 16 bits of XIP DLL top and the low word is the upper 16 bits of kernel dll top. Obviously, the correct statement should be if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(HIWORD(pTOCLoc->dlllast) << 16) && (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(LOWORD(pTOCLoc->dlllast) << 16)) So update the code like this should fix this issue or just like the comment, it is an extra sanity check, you can just get rid of it, either way can make the code moving forward and everything worked as advertised. "Extracting out copies of files from the nk.bin... replacing files... etc." Since the NK.BIN can be compressed, so the BinMod needs the compress.dll to decompress the data, the DLL can be found in C:\program files\microsoft platform builder\6.00\cepb\idevs\imgutils.

Read the article

Edge Detection on Screen

- by user2056745

I have a edge collision problem with a simple game that i am developing. Its about throwing a coin across the screen. I am using the code below to detect edge collisions so i can make the coin bounce from the edges of the screen. Everything works as i want except one case. When the coin hits left edge and goes to right edge the system doesnt detect the collision. The rest cases are working perfectly, like hitting the right edge first and then the left edge. Can someone suggest a solution for it? public void onMove(float dx, float dy) { coinX += dx; coinY += dy; if (coinX > rightBorder) { coinX = ((rightBorder - coinX) / 3) + rightBorder; } if (coinX < leftBorder) { coinX = -(coinX) / 3; } if (coinY > bottomBorder) { coinY = ((bottomBorder - coinY) / 3) + bottomBorder; } invalidate(); }

Read the article

Objective-C Moving UIView along a curved path

- by PruitIgoe

I'm not sure if I am approaching this the correct way. In my app, when a user touches the screen I capture the point and create an arc from a fixed point to that touch point. I then want to move a UIView along that arc. Here's my code: ViewController.m //method to "shoot" object - KIP_Projectile creates the arc, KIP_Character creates the object I want to move along the arc ... //get arc for trajectory KIP_Projectile* vThisProjectile = [[KIP_Projectile alloc] initWithFrame:CGRectMake(51.0, fatElvisCenterPoint-30.0, touchPoint.x, 60.0)]; vThisProjectile.backgroundColor = [UIColor clearColor]; [self.view addSubview:vThisProjectile]; ... KIP_Character* thisChar = [[KIP_Character alloc] initWithFrame:CGRectMake(51, objCenterPoint-5, imgThisChar.size.width, imgThisChar.size.height)]; thisChar.backgroundColor = [UIColor clearColor]; thisChar.charID = charID; thisChar.charType = 2; thisChar.strCharType = @"Projectile"; thisChar.imgMyImage = imgThisChar; thisChar.myArc = vThisProjectile; [thisChar buildImage]; [thisChar traceArc]; in KIP_Projectile I build the arc using this code: - (CGMutablePathRef) createArcPathFromBottomOfRect : (CGRect) rect : (CGFloat) arcHeight { CGRect arcRect = CGRectMake(rect.origin.x, rect.origin.y + rect.size.height - arcHeight, rect.size.width, arcHeight); CGFloat arcRadius = (arcRect.size.height/2) + (pow(arcRect.size.width, 2) / (8*arcRect.size.height)); CGPoint arcCenter = CGPointMake(arcRect.origin.x + arcRect.size.width/2, arcRect.origin.y + arcRadius); CGFloat angle = acos(arcRect.size.width / (2*arcRadius)); CGFloat startAngle = radians(180) + angle; CGFloat endAngle = radians(360) - angle; CGMutablePathRef path = CGPathCreateMutable(); CGPathAddArc(path, NULL, arcCenter.x, arcCenter.y, arcRadius, startAngle, endAngle, 0); return path; } - (void)drawRect:(CGRect)rect { CGContextRef currentContext = UIGraphicsGetCurrentContext(); _myArcPath = [self createArcPathFromBottomOfRect:self.bounds:30.0]; CGContextSetLineWidth(currentContext, 1); CGFloat red[4] = {1.0f, 0.0f, 0.0f, 1.0f}; CGContextSetStrokeColor(currentContext, red); CGContextAddPath(currentContext, _myArcPath); CGContextStrokePath(currentContext); } Works fine. The arc is displayed with a red stroke on the screen. In KIP_Character, which has been passed it's relevant arc, I am using this code but getting no results. - (void) traceArc { CGMutablePathRef myArc = _myArc.myArcPath; // Set up path movement CAKeyframeAnimation *pathAnimation = [CAKeyframeAnimation animationWithKeyPath:@"position"]; pathAnimation.calculationMode = kCAAnimationPaced; pathAnimation.fillMode = kCAFillModeForwards; pathAnimation.removedOnCompletion = NO; pathAnimation.path = myArc; CGPathRelease(myArc); [self.layer addAnimation:pathAnimation forKey:@"savingAnimation"]; } Any help here would be appreciated.

Read the article

help animating player in corona sdk

- by andrew McCutchan

working on a game in the corona sdk with lua and I need help so the player animates on the line drawn. Right now he animates at the beggining and the end but not on the line. here is the player code function spawnPlayerObject(xPlayerSpawn,yPlayerSpawn,richTurn) --spawns Rich where we need him. -- riches sprite sheet and all his inital spirites. We need to adjust this so that animations 3-6 are the only ones that animate when moving horizontally local richPlayer = sprite.newSpriteSet(richSheet1,1,6) sprite.add(richPlayer, "rich", 1,6,500,1) rich = sprite.newSprite(richPlayer) rich.x = xPlayerSpawn rich.y = yPlayerSpawn rich:scale(_W*0.0009, _W*0.0009) -- scale is used to adjust the size of the object. richDir = richTurn rich.rotation = richDir rich:prepare("rich") rich:play() physics.addBody( rich, "static", { friction=1, radius = 15 } ) -- needs a better physics body for collision detection. end and here is the code for the line function movePlayerOnLine(event) --for the original image replace all rich with player. if posCount ~= linePart then richDir = math.atan2(ractgangle_hit[posCount].y-rich.y,ractgangle_hit[posCount].x-rich.x)*180/math.pi playerSpeed = 5 rich.x = rich.x + math.cos(richDir*math.pi/180)*playerSpeed rich.y = rich.y + math.sin(richDir*math.pi/180)*playerSpeed if rich.x < ractgangle_hit[posCount].x+playerSpeed*10 and rich.x > ractgangle_hit[posCount].x-playerSpeed*10 then if rich.y < ractgangle_hit[posCount].y+playerSpeed*10 and rich.y > ractgangle_hit[posCount].y-playerSpeed*10 then posCount = posCount + 1 end end I don't think anything has changed recently but I have been getting an error when testing of " attempt to upvalue "rich" a nil value" on the second line, richDir = etc.

Read the article

question about 12.10 32 bit syslinux 4.06 EDD 2012-10-23 usb direct boot

- by logan

alright so guys i am trying to do a direct boot for Ubuntu 12.10 (as stated in the topic) i have been trying to do a direct boot for about ten minutes now. so i have to do a direct boot because my original OS has a corrupted kernel (i am trying to fix a friends laptop) Toshiba satellite C655D-S5518 anyway getting back to the main point when i put the usb in everything starts up fine it loads the usb then it goes to this screen saying "SYSLINUX 4.06 EDD 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et al." also getting a blinking line (as if i could put something in however when i try to type it does not show up so im guessing its telling me it is loading) However i am not getting a corrupted file or any kind of file error so im guessing my main question is, is this normal? and if so how long does it take for this to be done and what are the steps proceeding this? sorry guys if this is a dumb question i am new to the Ubuntu party haha thanks Logan.

Read the article

Why don't more games use vector art?

- by Parris

It would seem to me that vector art is more efficient in terms of resources/scalability; however, in most cases I have seen artists using bitmap/rasterized art. Is this a limitation put on the artists by the game programmers/designers? As a programmer I think vector art would be more ideal, since it allows for scaling up resolution without having to recreate the art, creating really large graphics or causing graphics to become blurry. The questions: why aren't more people using SVG/AI to create 2D game art? Would it actually be preferred (and who prefers it)? Are bitmap graphics a standard or a limitation (or maybe neither)? Background: I am working on an engine, and I had some kinda cool ideas for vector based graphics; however, I don't want to piss off artists in the future. I guess this is more a question centered around pragmatism and developing games.

Read the article

After force-installing a 32-bit deb failed, how can I install the 64-bit version?

- by TryTryAgain

I tried to dpkg -i --force-architecture google-earth-stable_i386.deb and it failed. But now when I try to install the amd64.deb it fails saying dpkg: error processing google-earth-stable_current_amd64.deb (--install): google-earth-stable: 6.2.2.6613-r0 (Multi-Arch: no) is not co-installable with google-earth-stable:i386 6.2.2.6613-r0 (Multi-Arch: no) which is currently installed Errors were encountered while processing: google-earth-stable_current_amd64.deb somehow it thinks the i386 version is installed. No google-earth files or directories even exist. sudo dpkg --configure -a outputs: dpkg: dependency problems prevent configuration of google-earth-stable:i386: google-earth-stable:i386 depends on lsb-core (= 3.2). dpkg: error processing google-earth-stable:i386 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: google-earth-stable:i386 so it does exist in some capacity. sudo apt-get -f install does nothing out of the ordinary: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded. The weird thing is that synaptic doesn't show any google earth package available let alone installed, nothing under the broken filter either. I have also tried sudo apt-get autoremove and sudo apt-get autoclean So, my question: How can I get rid of this issue?

Read the article

help animating a player in Corona SDK

- by andrew McCutchan

Working on a game in the Corona SDK with Lua and I need help so the player animates on the line drawn. Right now he animates at the beggining and the end but not on the line. Here is the player code: function spawnPlayerObject(xPlayerSpawn,yPlayerSpawn,richTurn) --spawns Rich where we need him. -- riches sprite sheet and all his inital spirites. We need to adjust this so that animations 3-6 are the only ones that animate when moving horizontally local richPlayer = sprite.newSpriteSet(richSheet1,1,6) sprite.add(richPlayer, "rich", 1,6,500,1) rich = sprite.newSprite(richPlayer) rich.x = xPlayerSpawn rich.y = yPlayerSpawn rich:scale(_W*0.0009, _W*0.0009) -- scale is used to adjust the size of the object. richDir = richTurn rich.rotation = richDir rich:prepare("rich") rich:play() physics.addBody( rich, "static", { friction=1, radius = 15 } ) -- needs a better physics body for collision detection. end And here is the code for the line: function movePlayerOnLine(event) --for the original image replace all rich with player. if posCount ~= linePart then richDir = math.atan2(ractgangle_hit[posCount].y-rich.y,ractgangle_hit[posCount].x-rich.x)*180/math.pi playerSpeed = 5 rich.x = rich.x + math.cos(richDir*math.pi/180)*playerSpeed rich.y = rich.y + math.sin(richDir*math.pi/180)*playerSpeed if rich.x < ractgangle_hit[posCount].x+playerSpeed*10 and rich.x > ractgangle_hit[posCount].x-playerSpeed*10 then if rich.y < ractgangle_hit[posCount].y+playerSpeed*10 and rich.y > ractgangle_hit[posCount].y-playerSpeed*10 then posCount = posCount + 1 end end I don't think anything has changed recently but I have been getting an error when testing of "attempt to upvalue "rich" a nil value" on the second line, richDir = etc.

Read the article

cocos2d: syncing CCAnimation frames with Box2d Shape manipulations

- by Hezi Cohen

hi everybody! my cocos2d game currently has a ccsprite attached to a box2d body. during the game i apply different CCAnimations on my sprite, i would like to perform certain manipulations to the box2d body according to the frame currently displayed by the sprite (change rotation of the body, etc.) my current idea on implementing this is to subclass ccsprite and change the setDisplayFrame implementation but i thought somebody here probably did the same and already has a solution, so any suggestions on how to implement this? thanks!

Read the article

Level Design V.S. Modeler

- by Ecurbed

From what I understand being a level designer and a character/environment/object/etc Modeler are two different jobs, yet sometimes it feels like a Modeler can also do the job of the level designer. I know this also depends on the scale of the game. For small games maybe they are one and the same, but for bigger games they become two different jobs. I understand a background in some modeling could not hurt when it comes to level design, but the question I have is: Do jobs prefer people who can model for level designing? This way they can kill two birds with one stone and have someone to create the assets and design the level. What is your opinion of the training? Does level design contain skill sets that make them completely different from what a modeler can do, or is this an easy transition for a modeler to become a level designer? Can you be a bad level designer but a good modeler and vice versa?

Read the article

Trade offs of linking versus skinning geometry

- by Jeff

What are the trade offs between inherent in linking geometry to a node versus using skinned geometry? Specifically: What capabilities do you gain / lose from using each method? What are the performance impacts of doing one over the other? What are the specific situations where you would want to do one over the other? In addition, do the answers to these questions tend to be engine specific? If so, how much?

Read the article

Interpolating Matrices

- by sebf

Hello, Apologies if I am missing something very obvious (likely!) but is there anything wrong with interpolating between two matrices by: float d = (float)(targetTime.Ticks - keyframe_start.ticks) / (float)(keyframe_end.ticks - keyframe_start.ticks); return ((keyframe_start.Transform * (1 - d)) + (keyframe_end.Transform * d)); As in my app, when I try an use this to interpolate between two keyframes, the model begins to 'shrink' - the severity based on how far between the two keyframes the target time is; its worst when the transform split is ~50/50.

Read the article

Licence Error for Matlab 2012a on Ubuntu 12.04 (64-bit)

- by MalTec

I have installed Matlab 2012a on ubuntu 12.04, while providing the licence I find the following error: Could not complete Activation because the License File could not be written to disk. You might not have write permission on the License File or the folder. /usr/local/MATLAB/R2012a/licenses/license_Malhar-PC_161052_R2012a.lic See your System Administrator for assistance. The specific error message text is: /usr/local/MATLAB/R2012a/licenses/license_Malhar-PC_161052_R2012a.lic (No such file or directory).

Read the article

Blending animations for more character movements

- by Noob Saibot

I am making a hack n slash 3rd person game. And I want the character movements to be more dynamic not like fighting games where you have a moves list. I want to animate tons of different animations and have them "Tween" between each other? Because I want the controls to not be keyboard mouse. I want it to be all keyboard. that way you have up to 10 inputs (All your fingers) to blend and morph animations to create more fluid movements. In the end this will almost be similar to characters typing a phrase or string of keys rather than move forward mouse look click to melee. My question is. Has anyone done this before and would someone go about trying to tween lets say one for key on the keyboard excluding Tab, Caps, R+Shift, L+Shift, Enter, R+Ctrl, L+Ctrl, L+Alt, R+Alt, Windows Key, and Menu. So thats all the numbers, letters and punctuation keys. Thats 46 keys gives me a combination of 46P1 = 5502622159812088949850305428800254892961651752960000000000L (used Python) and with a minimum entry value of 2 keypresses shortening to half. This is not humanly possible to create so many inique animations in one lifetime. But I'm guessing there is a reason this hasn't been done already. Or if I just used 10 basic keys. Maybe ASDF SPACE (RIGHT HAND) 456+0 (LEFT HAND KEYPAD) it would give me 3,628,800 posible unique animations.

Read the article

what is the simplest 3d software for unity?

- by kdavis8

Ive heard a lot about Daz studio, Poser, Maya, K-3d, Anim8or, Blender, and all the rest. My question is which one is the best choice in terms of simplicity and quality. price is not an issue really. I'm programming games in java for android mobile devices at the moment but i will eventually move onto larger platforms. I would like to utilize unity3d for the game programming itself and utilize a 3d modeling software just to create the game objects. I just need to know the best one to get started with from scratch or should i use a combination of multiple ones? Any insight for this would be great, thanks!

Read the article

Maintain proper symbol order when applying an armature in flash

- by Michael Taufen

I am trying to animate a character's leg in flash CS 5.5 for a game I am working on. I decided to use the bone tool because it's awesome. The problem I am having, however, is that for my character to be animated properly, the symbols that make up his leg (upper leg, lower leg, and shoe) need to be on top of each other in a specific way (otherwise the shoe looks like its next to the leg, etc). Applying the bones results in the following problem: the first symbol I apply it to is placed in the rear on the armature layer, the next on top of it, and so on, until the final symbol is already on top. I need them to be in the opposite order, but arrange send to back does nothing on the armature layer. How can I fix this? tl;dr: The bone tool is not maintaining the stacking order of my objects, please help. Thanks for helping :).

Read the article

Wine installation error Ubuntu 13.04 64 bit

- by Ocean

Wine fails to install correctly as there apparently are unresolved dependencies. Tried through the software center and terminal. Same problem. And I can't uninstall what's installed either. I've followed steps I've found in other threads here, but they don't seem to remedy the problem. I still can't install the package completely, yet it appears in the menu, nor can I uninstall it, because the package is reported as not installed. If anyone knows what to do, I'd appreciate any help. Thanks. :)

Read the article

Tool for creating Spritesheet? and Tips

- by Spooks

I am looking for a tool that I can use to create sprite sheet easily. Right now I am using Illustrator, but I can never get the center of the character in the exact position, so it looks like it is moving around(even though its always in one place), while being loop through the sprite sheet. Is there any better tools that I can be using? Also what kind of tips would you give for working with a sprite sheet? Should I create each part of the character in individual layers (left arm, right arm, body, etc.) or everything at once? any other tips would also be helpful! thank you

Read the article

Project Euler 11: (Iron)Python

- by Ben Griswold

In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 11. As always, any feedback is welcome. # Euler 11 # http://projecteuler.net/index.php?section=problems&id=11 # What is the greatest product # of four adjacent numbers in any direction (up, down, left, # right, or diagonally) in the 20 x 20 grid? import time start = time.time() grid = [\ [8,02,22,97,38,15,00,40,00,75,04,05,07,78,52,12,50,77,91,8],\ [49,49,99,40,17,81,18,57,60,87,17,40,98,43,69,48,04,56,62,00],\ [81,49,31,73,55,79,14,29,93,71,40,67,53,88,30,03,49,13,36,65],\ [52,70,95,23,04,60,11,42,69,24,68,56,01,32,56,71,37,02,36,91],\ [22,31,16,71,51,67,63,89,41,92,36,54,22,40,40,28,66,33,13,80],\ [24,47,32,60,99,03,45,02,44,75,33,53,78,36,84,20,35,17,12,50],\ [32,98,81,28,64,23,67,10,26,38,40,67,59,54,70,66,18,38,64,70],\ [67,26,20,68,02,62,12,20,95,63,94,39,63,8,40,91,66,49,94,21],\ [24,55,58,05,66,73,99,26,97,17,78,78,96,83,14,88,34,89,63,72],\ [21,36,23,9,75,00,76,44,20,45,35,14,00,61,33,97,34,31,33,95],\ [78,17,53,28,22,75,31,67,15,94,03,80,04,62,16,14,9,53,56,92],\ [16,39,05,42,96,35,31,47,55,58,88,24,00,17,54,24,36,29,85,57],\ [86,56,00,48,35,71,89,07,05,44,44,37,44,60,21,58,51,54,17,58],\ [19,80,81,68,05,94,47,69,28,73,92,13,86,52,17,77,04,89,55,40],\ [04,52,8,83,97,35,99,16,07,97,57,32,16,26,26,79,33,27,98,66],\ [88,36,68,87,57,62,20,72,03,46,33,67,46,55,12,32,63,93,53,69],\ [04,42,16,73,38,25,39,11,24,94,72,18,8,46,29,32,40,62,76,36],\ [20,69,36,41,72,30,23,88,34,62,99,69,82,67,59,85,74,04,36,16],\ [20,73,35,29,78,31,90,01,74,31,49,71,48,86,81,16,23,57,05,54],\ [01,70,54,71,83,51,54,69,16,92,33,48,61,43,52,01,89,19,67,48]] # left and right max, product = 0, 0 for x in range(0,17): for y in xrange(0,20): product = grid[y][x] * grid[y][x+1] * \ grid[y][x+2] * grid[y][x+3] if product > max : max = product # up and down for x in range(0,20): for y in xrange(0,17): product = grid[y][x] * grid[y+1][x] * \ grid[y+2][x] * grid[y+3][x] if product > max : max = product # diagonal right for x in range(0,17): for y in xrange(0,17): product = grid[y][x] * grid[y+1][x+1] * \ grid[y+2][x+2] * grid[y+3][x+3] if product > max: max = product # diagonal left for x in range(0,17): for y in xrange(0,17): product = grid[y][x+3] * grid[y+1][x+2] * \ grid[y+2][x+1] * grid[y+3][x] if product > max : max = product print max print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

Read the article

Can I make a Compiz animation rule for Wine menus?

- by satuon

Search Results

Search found 28170 results on 1127 pages for '16 bit animation'.

Page 63/1127 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70 | Next Page >

- by Maik Klein

- by Roger Travis

- by user12889

- by GigaBass

- by andrewbrust

- by Kate Moss' Open Space

- by user2056745

- by PruitIgoe

- by andrew McCutchan

- by logan

- by Parris

- by TryTryAgain

- by andrew McCutchan

- by Hezi Cohen

- by Ecurbed

- by Jeff

- by sebf

- by MalTec

- by Noob Saibot

- by kdavis8

- by Michael Taufen

- by Ocean

- by Spooks

- by Ben Griswold

- by satuon

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70 | Next Page >