Search Results

Search found 18761 results on 751 pages for 'lot'.

Page 638/751 | < Previous Page | 634 635 636 637 638 639 640 641 642 643 644 645  | Next Page >

• Indexing/Performance strategies for vast amount of the same value

  - by DrColossos

  Base information: This is in context to the indexing process of OpenStreetMap data. To simplify the question: the core information is divided into 3 main types with value "W", "R", "N" (VARCHAR(1)). The table has somewhere around ~75M rows, all columns with "W" make up ~42M rows. Existing indexes are not relevant to this question. Now the question itself: The indexing of the data is done via an procedure. Inside this procedure, there are some loops that do the following: [...] SELECT * FROM table WHERE the_key = "W"; [...] The results get looped again and the above query itself is also in a loop. This takes a lot of time and slows down the process massivly. An indexon the_key is obviously useless since all the values that the index might use are the same ("W"). The script itself is running with a speed that is OK, only the SELECTing takes very long. Do I need to create a "special" kind of index that takes this into account and makes the SELECT quicker? If so, which one? need to tune some of the server parameters (they are already tuned and the result that they deliver seem to be good. If needed, I can post them)? have to live with the speed and simply get more hardware to gain more power (Tim Taylor grunt grunt)? Any alternatives to the above points (except rewriting it or not using it)?

  Read the article

• WPF Event Handler in Another Class

  - by Nathan Tornquist

  I have built a series of event handlers for some custom WPF controls. The event handles format the text displayed when the user enters or leaves a textbox based on the type of data contained (Phone number, zip code, monetary value, etc.) Right now I have all of the events locally in the C# code directly attached to the xaml. Because I have developed a could controls, this means that the logic is repeated a lot, and if I want to change the program-wide functionality I would have to make changes everywhere the event code is located. I am sure there is a way to put all of my event handlers in a single class. Can anyone help point me in the correct direction? I saw this article: Event Handler located in different class than MainWindow But I'm not sure if it directly relates to what I'm doing. I would rather make small changes to the existing logic that I have, as it works, then rewrite everything into commands. I would essentially like to something like this if possible: LostFocus="ExpandedTextBoxEvents.TextBox_LostFocus" It is easy enough to do something like this: private void TextBoxCurrencyGotFocus(object sender, RoutedEventArgs e) { ExpandedTextBoxEvents.TextBoxCurrencyGotFocus(sender, e); } private void TextBoxCurrencyLostFocus(object sender, RoutedEventArgs e) { ExpandedTextBoxEvents.TextBoxCurrencyLostFocus(sender, e); } But that is less elegant.

  Read the article

• How to use interfaces in exception handling

  - by vikp

  Hi, I'm working on the exception handling layer for my application. I have read few articles on interfaces and generics. I have used inheritance before quite a lot and I'm comfortable with in that area. I have a very brief design that I'm going to implement: public interface IMyExceptionLogger { public void LogException(); // Helper methods for writing into files,db, xml } I'm slightly confused what I should be doing next. public class FooClass: IMyExceptionLogger { // Fields // Constructors } Should I implement LogException() method within FooClass? If yes, than I'm struggling to see how I'm better of using an interface instead of the concrete class... I have a variety of classes that will make a use of that interface, but I don't want to write an implementation of that interface within each class. In the same time If I implement an interface in one class, and then use that class in different layers of the application I will be still using concrete classes instead of interfaces, which is a bad OO design... I hope this makes sense. Any feedback and suggestions are welcome. Please notice that I'm not interested in using net4log or its competitors because I'm doing this to learn. Thank you Edit: Wrote some more code. So I will implement variety of loggers with this interface, i.e. DBExceptionLogger, CSVExceptionLogger, XMLExceptionLogger etc. Than I will still end up with concrete classes that I will have to use in different layers of my application.

  Read the article

• How to limit TCP writes to particular size and then block untlil the data is read

  - by ustulation

  {Qt 4.7.0 , VS 2010} I have a Server written in Qt and a 3rd party client executable. Qt based server uses QTcpServer and QTcpSocket facilities (non-blocking). Going through the articles on TCP I understand the following: the original implementation of TCP mentioned the negotiable window size to be a 16-bit value, thus maximum being 65535 bytes. But implementations often used the RFC window-scale-extension that allows the sliding window size to be scalable by bit-shifting to yield a maximum of 1 gigabyte. This is implementation defined. This could have resulted in majorly different window sizes on receiver and sender end as the server uses Qt facilities without hardcoding any window size limit. Client 1st asks for all information it can based on the previous messages from the server before handling the new (accumulating) incoming messages. So at some point Server receives a lot of messages each asking for data of several MB's. This the server processes and puts it into the sender buffer. Client however is unable to handle the messages at the same pace and it seems that client’s receiver buffer is far smaller (65535 bytes maybe) than sender’s transmit window size. The messages thus get accumulated at sender’s end until the sender’s buffer is full too after which the TCP writes on sender would block. This however does not happen as sender buffer is much larger. Hence this manifests as increase in memory consumption on the sender’s end. To prevent this from happening, I used Qt’s socket’s waitForBytesWritten() with timeout set to -1 for infinite waiting period. This as I see from the behaviour blocks the thread writing TCP data until the data has actually been sensed by the receiver’s window (which will happen when earlier messages have been processed by the client at application level). This has caused memory consumption at Server end to be almost negligible. is there a better alternative to this (in Qt) if i want to restrict the memory consumption at server end to say x MB's? Also please point out if any of my understandings is incorrect.

  Read the article

• Iphone -- maintaining a list of strings and a corresponding typedef enum

  - by William Jockusch

  Suppose I have the following: typedef enum functionType {ln, sin, sqrt} functionType; NSArray *functions = [NSArray arrayWithObjects: @"ln", @"sin", @"sqrt", nil]; Suppose further that *functions will not change at runtime. Question -- is there any way to set up a single structure which updates both of these? So that I only have to keep track of one list, instead of two. To explain what is going on -- the idea is that string input from the user will be stored in a variable of type functionType. Later on, I will have code like this: double valueOfFunction: (functionType) function withInput: (double) input switch (function) { case ln: return ln(input); case sin: return sin(input); case sqrt: return sqrt(input); //etc . . . could grow to include a lot of functions. } And valueOfFunction needs to be fast. So I don't want to be doing string comparisons there.

  Read the article

• How to define default values optional fields in play framework forms?

  - by natalinobusa

  I am implementing a web api using the scala 2.0.2 play framework. I would like to extract and validate a number of get parameters. And for this I am using a play "form" which allows me to define optional fields. Problem: For those optional fields, I need to define a default value if the parameter is not passed. The code is intended to parse correctly these three use cases: /test?top=abc (error, abc is not an integer) /test?top=123 (valid, top is 123) /test (valid, top is 42 (default value)) I have come up with the following code: def test = Action { implicit request => case class CData(top:Int) val p = Form( mapping( "top" -> optional(number) )((top) => CData($top.getOrElse(42))) ((cdata:CData) => Some(Some(cdata.top))) ).bindFromRequest() Ok("all done.") } The code works, but it's definitely not elegant. There is a lot of boiler plate going on just to set up a default value for a missing request parameter. Can anyone suggest a cleaner and more coincise solution?

  Read the article

• vaadin custom layout setting a text area in a table with the location attribute

  - by user3717298

  I need to set a text area in the html template and use it as a custom component in vaadin the html snippet is as below <table> <tr> <td> JUNK SENTENCE </td> <td> <div location="HEADIN"></div> <div location="Details"></div> <div location="Attachment"></div> </td> <td> <p>School of more than 50 students univer versities.</p> </td> </tr> </table> All the place holders are working and displays data but the "details" holder should be a text area. as the text is a lot over there so I tried the below way but it just turned the place holder to text vaadin could not manipulate / identify the "Details" place holder. I tried the below way i set - in side the text area tag. <textarea rows="4" cols="50"> </textarea> and again i tried this way too which also did not work. <textarea rows="4" cols="50" location="Details"> </textarea> Any guidance would be appreciated to solve this I am setting the needed values from a formfeildfactory and these values are set by implementing the Vaadin Custom field class(in case it helps some more to identify)

  Read the article

• License of popular dictionary word lists (e.g. SOWPODS, TWL)? Copyright? Trademarks?

  - by BobbyJim

  (I'm not sure if this off-topic. I found a lot of voted-up questions about software licenses and this is related. Plus, I'm sure many of us have had the situation that we need to use a dictionary in our code) I'm making a (maybe commercial) word game and need to use a good word dictionary for checking words. The most common dictionaries to use are the SOWPODS or TWL lists that are used Scrabble tournaments; see here: http://www.scrabblist.com/ (I have nothing to do with this site by the way). I've seen loads of websites offering these two dictionaries for download and loads of word games advertise that they use them. However, I cannot find any licensing terms attached to these dictionaries wherever I download them. For the players of my game, I'd want to say what dictionary I'm using (e.g. "this game uses SOWPODS"). However, I'm nervous about what I can do legally. Does anyone know about if you can copyright lists of words? Does anyone know the licenses of TWL and SOWPODS? TWL and SOWPODS don't seem to have trademarks on them but I'd like to know for sure. I cannot find any good sources for this information. EDIT: Great, now the top result for "SOWPODS license" is my stackoverflow question. :)

  Read the article

• How to avoid geometric slowdown with large Linq transactions?

  - by Shaul

  I've written some really nice, funky libraries for use in LinqToSql. (Some day when I have time to think about it I might make it open source... :) ) Anyway, I'm not sure if this is related to my libraries or not, but I've discovered that when I have a large number of changed objects in one transaction, and then call DataContext.GetChangeSet(), things start getting reaalllly slooowwwww. When I break into the code, I find that my program is spinning its wheels doing an awful lot of Equals() comparisons between the objects in the change set. I can't guarantee this is true, but I suspect that if there are n objects in the change set, then the call to GetChangeSet() is causing every object to be compared to every other object for equivalence, i.e. at best (n^2-n)/2 calls to Equals()... Yes, of course I could commit each object separately, but that kinda defeats the purpose of transactions. And in the program I'm writing, I could have a batch job containing 100,000 separate items, that all need to be committed together. Around 5 billion comparisons there. So the question is: (1) is my assessment of the situation correct? Do you get this behavior in pure, textbook LinqToSql, or is this something my libraries are doing? And (2) is there a standard/reasonable workaround so that I can create my batch without making the program geometrically slower with every extra object in the change set?

  Read the article

• javascript array/object issue

  - by FlyingCat

  I am trying to push elements to an array. for (a=0; a < test.length; a++){ if(this.testnumber != test[a].number){ //it will only loop 8 times under conditional statement group = { title: test.Title , ID: test.ID, contents: [] }; this.company.push(group); this.testnumber = test.number[a]; } //outside of if conditional statement.. it will loop 15 times //i want every test[a].conetents get pushed to group.contents array. //this.company is the final variable I need for this function... group.contents.push(test[a].contents); } However, when I do console.log(this.company); I see 8 elmements with only 1 element in each group.contents array The ideal situation is to have 8 elements with 2 to 3 elements in the group.contents array I hope I explain my situation well. Any idea how to solve my issue? Thanks a lot!

  Read the article

• Is NFS capable of preserving order of operations?

  - by JustJeff

  I have a diskless host 'A', that has a directory NFS mounted on server 'B'. A process on A writes to two files F1 and F2 in that directory, and a process on B monitors these files for changes. Assume that B polls for changes faster than A is expected to make them. Process A seeks the head of the files, writes data, and flushes. Process B seeks the head of the files and does reads. Are there any guarantees about how the order of the changes performed by A will be detected at B? Specifically, if A alternately writes to one file, and then the other, is it reasonable to expect that B will notice alternating changes to F1 and F2? Or could B conceivably detect a series of changes on F1 and then a series on F2? I know there are a lot of assumptions embedded in the question. For instance, I am virtually certain that, even operating on just one file, if A performs 100 operations on the file, B may see a smaller number of changes that give the same result, due to NFS caching some of the actions on A before they are communicated to B. And of course there would be issues with concurrent file access even if NFS weren't involved and both the reading and the writing process were running on the same real file system. The reason I'm even putting the question up here is that it seems like most of the time, the setup described above does detect the changes at B in the same order they are made at A, but that occasionally some events come through in transposed order. So, is it worth trying to make this work? Is there some way to tune NFS to make it work, perhaps cache settings or something? Or is fine-grained behavior like this just too much expect from NFS?

  Read the article

• Echoing variable construct instead of content

  - by danp

  I'm merging two different versions of a translations array. The more recent version has a lot of changes, over several thousand lines of code. To do this, I loaded and evaluated the new file (which uses the same structure and key names), then loaded and evaluated the older version, overwriting the new untranslated values in the array with the values we already have translated. So far so good! However, I want to be able to echo out the constructor for this new merged array so I can cut and paste it into the new translation file, and have job done (apart from completing the rest of the translations..). The code looks like this (lots of different keys, not just index): $lang["index"]["chart1_label1"] = "Subscribed"; $lang["index"]["chart1_label2"] = "Unsubscribed"; And the old.. $lang["index"]["chart1_label1"] = "Subscrito"; $lang["index"]["chart1_label2"] = "Não subscrito"; After loading the two files, I end up with a merged $lang array, which I then want to echo out in the same form, so it can be used by the project. However, when I do something like this.. foreach ($lang as $key => $value) { if (is_array($value)) { foreach ($value as $key2 => $value2) { echo "$lang['".$key."']"; // ... etc etc } } } ..obviously I get "ArrayIndex" etc etc instead of "$lang". How to echo out $lang without it being evaluated..? Once this is working, can add in the rest of the brackets etc (I realise they are missing), but just want to make this part work first. If there's a better way to do this, all ears too! Thanks.

  Read the article

• avoiding code duplication in Rails 3 models

  - by Dustin Frazier

  I'm working on a Rails 3.1 application where there are a number of different enum-like models that are stored in the database. There is a lot of identical code in these models, as well as in the associated controllers and views. I've solved the code duplication for the controllers and views via a shared parent controller class and the new view/layout inheritance that's part of Rails 3. Now I'm trying to solve the code duplication in the models, and I'm stuck. An example of one of my enum models is as follows: class Format < ActiveRecord::Base has_and_belongs_to_many :videos attr_accessible :name validates :name, presence: true, length: { maximum: 20 } before_destroy :verify_no_linked_videos def verify_no_linked_videos unless self.videos.empty? self.errors[:base] << "Couldn't delete format with associated videos." raise ActiveRecord::RecordInvalid.new self end end end I have four or five other classes with nearly identical code (the association declaration being the only difference). I've tried creating a module with the shared code that they all include (which seems like the Ruby Way), but much of the duplicate code relies on ActiveRecord, so the methods I'm trying to use in the module (validate, attr_accessible, etc.) aren't available. I know about ActiveModel, but that doesn't get me all the way there. I've also tried creating a common, non-persistent parent class that subclasses ActiveRecord::Base, but all of the code I've seen to accomplish this assumes that you won't have subclasses of your non-persistent class that do persist. Any suggestions for how best to avoid duplicating these identical lines of code across many different enum models?

  Read the article

• where is the best palce to count the lazy load property using JPA

  - by Ke

  Let's say we have a "Question" and "Answer" entity, @Entity public class Question extends IdEntity { @Lob private String content; @Transient private int answerTotal; @OneToMany(fetch = FetchType.LAZY) private List<Answer> answers = new ArrayList<Answer>(); ...... I need to tell how many answers for the question every time Question is queryed. So I need to do count: String count = "select count(o) from Answer o WHERE o.question=:q"; My question is, where is the best place to do the count? (Because I did a lot of query about Question entity, by date, by tag, by category, by asker, etc. It is obviously not a good solution to add count operation in each query. My first attempt is to implement a @PostLoad listener, so every time Question entity is loaded, I do count. However, EntityManager cannot be injected in listener. So this way does not work. Any hint?

  Read the article

• Display contact pictures in list view

  - by user1068400

  I need to display the contact pictures in a list view. In my custom_row_view.xml I have: <ImageView android:id="@+id/contact_image" android:layout_width="60dp" android:layout_height="50dp" /> and then in my activity i have: final SimpleAdapter adapter = new SimpleAdapter( this, list, R.layout.custom_row_view, new String[] {"avatar","telnumber","date","name","message","sent"}, new int[] {R.id.contact_image,R.id.text1,R.id.text2,R.id.text3,R.id.text4,R.id.isent} ); I have a hashmap HashMap temp2 = new HashMap(); where i put all the values of each line. ("list" is a list of Hashmap) But when I do: Cursor photo2 = managedQuery( Data.CONTENT_URI, new String[] {Photo.PHOTO}, // column for the blob Data._ID + "=?", // select row by id new String[]{photoid}, // filter by photoId null); Bitmap photoBitmap = null; if(photo2.moveToFirst()) { byte[] photoBlob = photo2.getBlob(photo2.getColumnIndex(Photo.PHOTO)); photoBitmap = BitmapFactory.decodeByteArray(photoBlob, 0, photoBlob.length); if (photoBitmap != null) temp2.put("avatar",photoBitmap); else temp2.put("avatar",R.drawable.unknowncontact); } photo2.close(); Nothing is displayed! "temp2.put("avatar",photoBitmap);" does not display anything but when I try to display something from the drawable folder it works!!! Please help me, i have been locked on this problem for several days! Thanks a lot!

  Read the article

• c# Why can't open generic types be passed as parameters?

  - by Rich Oliver

  Why can't open generic types be passed as parameters. I frequently have classes like: public class Example<T> where T: BaseClass { public int a {get; set;} public List<T> mylist {get; set;} } Lets say BaseClass is as follows; public BaseClass { public int num; } I then want a method of say: public int MyArbitarySumMethod(Example example)//This won't compile Example not closed { int sum = 0; foreach(BaseClass i in example.myList)//myList being infered as an IEnumerable sum += i.num; sum = sum * example.a; return sum; } I then have to write an interface just to pass this one class as a parameter as follows: public interface IExample { public int a {get; set;} public IEnumerable<BaseClass> myIEnum {get;} } The generic class then has to be modified to: public class Example<T>: IExample where T: BaseClass { public int a {get; set;} public List<T> mylist {get; set;} public IEnumerable<BaseClass> myIEnum {get {return myList;} } } That's a lot of ceremony for what I would have thought the compiler could infer. Even if something can't be changed I find it psychologically very helpful if I know the reasons / justifications for the absence of Syntax short cuts.

  Read the article

• Animate screen while loading textures

  - by Omega

  My RPG-like game has random battles. When the player enters a random battle, it is necessary for my game to load the textures used within that battle (animated monsters, animations, etc). The textures are quite a lot, and rather big (the battles are very graphical intensive). Such process consumes significant time. And while it is loading, the whole screen freezes. The game's map freezes, and the wait time is significant - I personally find it annoying. I can't afford to preload the textures because, after doing some math, I realized: If I preload all the textures at the beginning of the game, the application will definitely crash. If I preload the textures that are used in a specific map when the player enters the map, the application is very likely to crash as well. I can only afford to load the textures when I need them, and dispose of them as soon as the battle ends. I'd prefer to not use a "loading screen" image because it affects my game's design and concept. I want to avoid this approach. If I could do some kind of animation while loading the textures, it would be great, which leads to my question: is that possible? What kind of animation, you ask? Well, how about... you remember when Final Fantasy used to distort the screen while apparently loading the textures? Something like that. But well, distorting is quite a time-consuming process as well, so maybe just a cool frame-by-frame animation or something. While writing this, I realized that I could make small pauses between textures (there are multiple textures), and during such pauses, I update the screen to represent the animation's state. However, this is very unlikely to happen, because each texture is 2048x2048, so the animation would be refreshed at a rather laggy (and annoying) rate. I'd prefer to avoid this as well.

  Read the article

• Is it possible to load an entire SQL Server CE database into RAM?

  - by DanM

  I'm using LinqToSql to query a small SQL Server CE database. I've noticed that any operations involving sub-properties are disappointingly slow. For example, if I have a Customer table that is referenced by an Order table via a foreign key, LinqToSql will automatically create an EntitySet<Order> property. This is a nice convenience, allowing me to do things like Customer.Order.Where(o => o.ProductName = "Stopwatch"), but for some reason, SQL Server CE hangs up pretty bad when I try to do stuff like this. One of my queries, which isn't really that complicated takes 3-4 seconds to complete. I can get the speed up to acceptable, even fast, if I just grab the two tables individually and convert them to List<Customer> and List<Order>, then join then manually with my own query, but this is throwing out a lot of the appeal of LinqToSql. So, I'm wondering if I can somehow get the whole database into RAM and just query that way, then occasionally save it. Is this possible? How? If not, is there anything else I can do to boost the performance? Note: My database in its initial state is about 250K and I don't expect it to grow to more than 1-2Mb. So, loading the data into RAM certainly wouldn't be a problem from a memory point of view.

  Read the article

• JQuery DataTables link item

  - by rogcg

  I'm trying to link the items from a specific column, but each one will be linked for a different id from the json string. Unfortunately I can't find a way to do this using the API (I know there is a lot of ways to do that without using the API ), but I'm looking for a way to link a item from a column (each one with a link for a specific id). So here is my code, I use getJSON to get the JSON from the server, and I load the data from this JSON to the table like this: $.getJSON("/method/from/server/", function(data) { var total = 0; $("#table_body").empty(); var oTable = $('#mytable').dataTable( { "sPaginationType" : "full_numbers", "aaSorting": [[ 0, "asc" ]] }); oTable.fnClearTable(); $.each(data, function(i, item) { oTable.fnAddData( [ item.contact_name, item.contact_email ] ); }); }); What I want to do, is for each row, link the contact_name to its id, which is also in the JSON, and can be accessed inside this $.each loop by using item.contact_id. Is there a way to do this using DataTables API, if yes, could you explain me and provide a good resource that will help me with this? Thanks.

  Read the article

• Hibernate HQL m:n join problem

  - by smallufo

  I am very unfamiliar with SQL/HQL , and am currently stuck with this 'maybe' simple problem : I have two many-to-many Entities , with a relation table : Car , CarProblem , and Problem . One Car may have many Problems , One Problem may appear in many Cars, CarProblem is the association table with other properties . Now , I want to find Car(s) with specified Problem , how do I write such HQL ? All ids are Long type . I've tried a lot of join / inner-join combinations , but all in vain.. -- updated : Sorry , forget to mention : Car has many CarProblem Problem has many CarProblem Car and Problem are not directly connected in Java Object. -- update , java code below -- @Entity public class Car extends Model{ @OneToMany(mappedBy="car" , cascade=CascadeType.ALL) public Set<CarProblem> carProblems; } @Entity public class CarProblem extends Model{ @ManyToOne public Car car; @ManyToOne public Problem problem; ... other properties } @Entity public class Problem extends Model { other properties ... // not link to CarProblem , It seems not related to this problem // **This is a very stupid query , I want to get rid of it ...** public List<Car> findCars() { List<CarProblem> list = CarProblem.find("from CarProblem as cp where cp.problem.id = ? ", id).fetch(); Set<Car> result = new HashSet<Car>(); for(CarProblem cp : list) result.add(cp.car); return new ArrayList<Car>(result); } } The Model is from Play! framework , so these properties are all public .

  Read the article

• How to accommodate for the different screen resolution of iPhone 4?

  - by mystify

  This is a programming question! Read on before you vote to close! According to Apple, iPhone 4 has a new screen resolution: 3.5-inch (diagonal) widescreen Multi-Touch display 960-by-640-pixel resolution at 326 ppi This little detail affects our apps in a heavy way. Most of the demo apps on the net have one thing in common: They position views in the believe that the screen has a fixed size of 320 x 480 pixels. So what most -if not all- developers do is: They designed everything in such a way, that a touchable area is -for example- 50 x 50 pixels big. Just enough to tap it. Things have been positioned relative to the upper left, to reach a specific position on screen - let's say the center, or somewhere at the bottom. Edit: It seems Apple has integrated an switch that allows to tell if an app is highRes or not. Nice. When we develop high-resolution apps, probably they won't work on older devices. And if they did, they would suffer a lot from 4-times the size of any image, having to scale them down in memory. This is community wiki. Just add anything that you think is relevant to this huge problem (constant screen res was one of the main reasons why I didn't go for Android!!).

  Read the article

• Translate Prototype code into Jquery version

  - by user1055495

  I everybody, I'm working on a SaaS application and I need to use Jquery instead of Prototype due to some extra plugins integration. My code that was wotking a charm with Prototype is not running anymore with Jquery and I'm not used to write in this framework... Is there someone to help me in "translating" this one: Thanks a lot for your help. var rates = new Array(); <% for tva_rate in @tva_rates -%> rates.push(new Array(<%= tva_rate.id %>, '<%=h tva_rate.taux %>', '<%=h tva_rate.compte_id %>' )); <% end -%> function tvaSelected() { tva_id = $('journal_tva_id').getValue(); show = 1; if (tva_id > 0){ rates.each(function(rate) { if (rate[0] == tva_id) { $('journal_taux').setValue(rate[1]); $('journal_compte_tva').setValue(rate[2]); show = 2; } }); } if (show == 1) { $('tva_taux_field').hide(); } else { $('tva_taux_field').show(); } } document.observe('dom:loaded', function() { tvaSelected(); $('journal_tva_id').observe('change', tvaSelected); });

  Read the article

• iPhone -trouble with a loading data from webservice into a tableview

  - by medampudi

  I am using a Window based application and then loading up my initial navigationview based controller. After loading it if the user is not registered/ does not have a credentials present then it takes the user to a login view controller . loginViewController *sampleView = [[loginViewController alloc] initWithNibName:@"loginViewController" bundle:nil]; [self.navigationController presentModalViewController:sampleView animated:YES]; [sampleView release]; then right after that i try to load the table with data that i get from a webservice using asiHTTP .. for this question lets say it takes 3 seconds time to get the data and then deserialize it . now... my question is it works out okey in the later runs as I store the username and password in a seure location... but in the first instance.... i am not able to get the data to laod to the tableview... I have tried a lot of things... 1. Initially the data fetch methods was in a diffrent methods.. so i thought that might be the problem as then moved it the same place as the tbleviewController(navigationController) 2. I event put in the Reload data at the end of the functionality for the data parsing and deserialization... nothing happens. 3. i did not understand the concept of @property and alll.... 4. The screen is black screen with nothing displayed on it for a good 5 seconds in the consecutive launches of the app.... so could we have something like a MBPorgressHUD implemented for the same. could any one please help for these scenarios and guidance as to what paths to take from here...

  Read the article

• Is there a better way to write this repetitive event-declaration code in C# when implementing an int

  - by Damien Wildfire

  I have a lot of code like the following, where I explicitly implement some events required by an interface. public class IMicrowaveNotifier { event EventHandler<EventArgs> DoorClosed; event EventHandler<EventArgs> LightbulbOn; // ... } public class Microwave : IMicrowaveNotifier { private EventHandler<EventArgs> _doorClosed; event EventHandler<EventArgs> IMicrowaveNotifier.DoorClosed { add { lock (this) _doorClosed += value; } remove { lock (this) _doorClosed -= value; } } private EventHandler<EventArgs> _lightbulbOn; event EventHandler<EventArgs> IMicrowaveNotifier.LightbulbOn { add { lock (this) _lightbulbOn += value; } remove { lock (this) _lightbulbOn -= value; } } // ... } You can see that much of this is boilerplate. In Ruby I'd be able to do something like this: class Microwave has_events :door_closed, :lightbulb_on, ... end Is there a similar shorter way of removing this boilerplate in C#? Update: I left a very important part out of my example: namely, the events getting implemented are part of an interface, and I want to implement it explicitly. Sorry for not mentioning this earlier!

  Read the article

• Log in to subdomain via main domain

  - by Mattias

  I have a website, available through multiple domainnames. like www.domain1.com .... www.domain5.com All my customers have their own subdomain. like: customer1.domain1.com customer2.domain1.com .... customer351.domain4.com Currently i dont use SSL, each customer log in their own account via their sub domain. I want to change this, and make all customers log in on a central log in page, that would use SSL, for example. https://login.domain1.com And somehow redirect each user to the correct sub domain adress. (Sub domain that don't use SSL) How do I do this, and maintain security? One idea i had: Login - add random value somewhere in the database, Redirect to subdomain, with querystring the randomvalue. And after that the session takes care of it, Each value can be used once only.. But how secure is that? I guess someone would ask the question "why?" to me. Because SSL costs money. And unfortunately i dont have a lot of it. :D Thanks for your time!

  Read the article

< Previous Page | 634 635 636 637 638 639 640 641 642 643 644 645  | Next Page >