Search Results

Search found 2692 results on 108 pages for 'ts gateway'.

Page 71/108 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• dd-wrt switch for PfSense

  - by Kmao

  I currently have eth2 on my pfsense set up, and configured as 192.168.1.1, it has dhcp setup with allocation being 192.168.1.10 - 192.168.1.245. On my dd-wrt box, i disabled the WAN, and set it to act as a port for the switch. I disabled dhcp, dnsmasq, spi firewall, Wlan0 and set a static IP for the router being 192.168.1.10 Pfsense is plugged into lan0 and pc plugged into lan1 (wan port is empty) I have followed a few different guides, but i can't seem to get my router to act as a switch. Anyone have success using DD-WRT as a switch while using pfsense as your dhcp/dns/gateway. Any advice would help :)

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• IIS FTP service - download timeouts and restarts getting the data twice

  - by accel229

  We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

  Read the article

• Windows VPN not authenticating from ADSL to Wireless link

  - by deanvz

  I have a normal windows VPN on a computer connecting to a 196.201.x.x/24 IP. If this VPN tries to connect from any address in the 41.x.x.x range it cant get there. The server is a normal windows 2008 server, running exchange with a PPPoE IP natted to a public IP on the public gateway of the wireless network as the server is on site and its connectivity is derived from Mikrotik RB's. The computer on the 41 range can traceroute and ping the server, but the VPN does not authenticate. When on the network or any other, the VPN works fine. Is there something that could be configured on the VPN client? All firewall settings of a standard ADSL router have been checked and found to block only ICMP's. Is this a VPN configuration problem or a network issue?

  Read the article

• Printing on Remote Desktop session

  - by Arindam Banerjee

  We have to connect a Windows 2008 server using Remote Desktop from Windows XP machine. A Barcode Printer is attached with XP machine and the printer is shared as Local Resource in RDC session to the server. On the server we have to print from an application which prints either to LPT port or shared printer (UNC path). For this I use to configure print pooling combining LPT1 and (Terminal Server) TSxxx port. As I don't know the option to access the Terminal Session printer via UNC path. But I have the following issues - Every time I connect to a remote session, the printer from my local Win XP machine is showing in Printers and Faxes on Win 2008 Server (Terminal Server), but I am not allowed to manage the Win XP printer from Terminal Server to enable pooling. On the server I have to change the security permission every time and then enable print pooling. How can I keep the security permission unchanged? Secondly I created a batch file to enable print pooling. rundll32 printui.dll,PrintUIEntry /Xs /n "Printer (from CLIENT)" Portname "LPT1:,TS005" But every time the printer in terminal session connects in diffrent terminal Session port. Any solution to make the TS port fixed? Help from anyone will be highly appreciated.

  Read the article

• 2wire modem to linksys router

  - by Imajica666

  I want to hook a Linksys router to my 2wire modem/router (2701HG-b) to share my Internet connection. I ran from an open port from the 2wire to the WAN port of the Linksys but it will not work. I did this before with my cable modem to a router to my Linksys router. It worked then but not now. I read I can turn the 2 wire into a modem only but I need the 2wire wireless access also. IPCONFIG /ALL sees the 2wire with IP info as well as DHCP server/gateway. Any ideas?

  Read the article

• Google Chrome custom search engine for secure Wikipedia

  - by gdejohn

  I have this custom search engine set up in Google Chrome: https://encrypted.google.com/search?q=site%3Aen.wikipedia.org+%s&btnI=745 It searches Google for site:en.wikipedia.org {query}, and the btnI=745 is for I'm Feeling Lucky, so it automatically redirects to the first result. I like this better than using Wikipedia's search function directly because it gives me very effective approximate string matching, so I can misspell my search, or leave a word out, or just search for some keywords, and I still get what I'm looking for right away. What I'd like is for it to use Wikipedia's secure gateway: https://secure.wikimedia.org/wikipedia/en/wiki/ It's easy enough to set up a custom search engine that uses the secure version of Wikipedia's search function directly, but I can't figure out how to correctly incorporate it into my version going through Google. Nothing I've tried works.

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• setting up bridged adapter for VPN server

  - by B. VB.

  I have an Ubuntu linux Linode server that I am trying to install OpenVPN on. I'm following the tutorials (which, it turns out, are quite incomplete). auto br0 iface br0 inet static address 192.168.0.10 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off When I add this chunk in my /etc/network/interfaces, and I restart networking, my eth0 interface does not have an IP and I cannot get on the network (I need to use a buggy, slow, and annoying AJAX term to do damage repair). Why does adding this screw everything up? Any tips on how to set up this bridged adapter?? Thanks in advance!

  Read the article

• ipconfig /release not working, why?

  - by barlop

  ipconfig /release is not working, why is that? here is a sequence where I put my cable in get an IP, try ipconfig /release and it tells me it can't release wireless, but there is no wireless connection. i'm just trying to release the wired one. C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Fine so I plug my cable in C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0 Default Gateway . . . . . . . . . : C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.8 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.254 Fine so from above, it clearly has an iP C:\>ipconfig /release Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its me dia disconnected. C:\>

  Read the article

• Ubuntu 12.04 host lookups extremely slow

  - by tubaguy50035

  I'm having issues with one of my servers taking a long time to look up host names. This is an Ubuntu 12.04 box, so I've tried following the new resolvconf directives. In my /etc/network/interfaces file, I defined my name servers like this: auto eth0 iface eth0 inet static address someaddress netmask 255.255.255.0 gateway 198.58.103.1 dns-nameservers 74.14.179.5 72.14.188.5 In my /etc/resolv.conf, I see these name servers, like this: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 74.14.179.5 nameserver 72.14.188.5 On another box, I edited the resolv.conf directly as directed by my hosts' setup help files. It looks like this: domain members.linode.com search members.linode.com nameserver 72.14.179.5 nameserver 72.14.188.5 options rotate This second box has no issues with host name look ups and responds quite quickly. Could not having the domain and search directives make my look ups slow? By slow, I mean it's taking anywhere from 5 to 15 seconds to find the IP address of a host.

  Read the article

• Are there other application layer firewalls like Microfot TMG (ISA) that do advanced http rules?

  - by Bret Fisher

  Since the old days ISA and now TMG have had several great features that I often want to deploy to my customers because of the enhanced functionality and security, but often the cost of an additinal server HW, Windows Server, and TMG license is too much to justify when compaired to a $300-500 appliance. Are there other gateway firewalls that can perform one or more of these application layer features: pre-auth incoming http traffic against AD/LDAP before sending packets to internal server (forms auth or basic creds popup)? read host headers of incoming http traffic (even on https) to a single public IP and route packets to different internal servers based on that host header?

  Read the article

• How to create persistent static route on Mac OS X 10.6?

  - by kopobamypa

  I need to add static route on Mac OS. I found good description here Permanent Static Route Mac OS X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

  Read the article

• Inbound connections using Internet Connection Sharing in Apple/Mac/Leopard

  - by tlianza

  I have a Mac mini which I'm using to give some other devices wireless access, by sharing it's Airport connection with the local ethernet, and that is plugged into a switch. All devices can get online no problem. (See how: http://www.macosxhints.com/article.php?story=20041112101646643 and http://www.macosxhints.com/article.php?story=20071223001432304 ) The issue is that I need to be able to connect in to these machines as well (at least, for the Slingbox to work). All the devices have 192.168.2.* addresses, and the rest of my local network is on 192.168.1.*. I tried setting a static route so that the 192.168.2.* addresses would use a gateway of 192.168.1.50 (my mac mini's address) but that didn't seem to help. Does anyone know if what I'm trying to do is possible? I admit I'm not certain what Internet Connection sharing is really doing under the hood... perhaps it just does basic nat, and doesn't do the type of routing I'm looking for. If so, anyone know if this is possible?

  Read the article

• What kind of SSL certificate do I need?

  - by Christoffer

  Hi, I want to install HTTPS on my server and I wonder what kind of certificate I will need and where I can buy it. The site is a web application that demands high security by it's users since they store sensitive business data. I am also integrating a third party payment gateway into the register process of the site and need a secure way to send credit card data one way. I do not intend to store this data in our own database. So, what do I need? And also, how do I install it on Ubuntu Server 9.10 / Apache2 ? Cheers! Christoffer

  Read the article

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• RouterLess, house-wired network using multiple powerline adapters

  - by Cliff Arnell

  related to the 'old days' of one ethernet cable tapped with Ts for each monitor.... my question might be very simple... or not. I have an over-the-air internet provider with a wire dish with a powered transceiver and cat5 cable out of the providers supplied modem. I'm presently connecting the output of the modem into my wireless router which sends the internet signal all over the house. Standard stuff, I believe. My Question. Can I just connect the output of the modem into 1 powerline adapter and tie all my equipment such as computer, printer, laptop, Tivo recorder, etc. into 1-each local powerline adapters located near each devices resulting in a 'house-wired' network and no router? I'm bothered by the idea that my over-the-air provider might be using something in my router to establish and keep my IP connection alive. I did have to configure the router for my IP, a router which, in my proposed scenario, would no longer exist. Thank you for your help.

  Read the article

• OpenVPN client on Amazon EC2

  - by Matt Culbreth

  I have an account with an OpenVPN service, and I'd like to get that running on my EC2 instance running Ubuntu 12.04. I have my config file in /etc/openvpn, and it connects fine when I run sudo openvpn --config matt.ovpn. However, I then lose connectivity to the EC2 machine, and I can't SSH back to it until I reboot. Previously I have done things like sudo ip rule add from IP_ADDRESS table 10 and then sudo ip route add default via GATEWAY_IP table 10, but that's not working on EC2. Any ideas? My private IP address right now is 10.209.29.XXX and my gateway is 10.209.29.1.

  Read the article

• Auto login CISCO VPN client on linux [closed]

  - by user70704

  Hi, I have installed Cisco vpn client on my linux system (Fedora core 8). After login, every time, i need to run the following command VPNC to connect the VPN server. VPNC command request the input data from the user, IPSec gateway : IPSec ID: IPSec Secret: Username: Password: So, my requirement is, can i connect the VPN server through any single command?. I feel so lazy to enter the above requirements at every time. I want to connect the VPN Server on boot startup. I was try using expect script, but i can't. Thanks in advance.

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• Trying to get a new user up on VPN

  - by Chris

  Caveat: I am not a sysadmin, so please forgive the n00bness of the query. We have a new user and I'm trying to get them up on VPN. We use pfsense as an IPSEC endpoint. This person is using Shrewsoft for the client. I had created an entry in pfsense for them and then edited a previous user's config file. Shrewsoft didn't import the config file very well and I had to hand edit the information. Now we are getting gateway errors. One thing I've noticed is that there is a different between the values of the preshared key stored on the firewall and the psk stored in the config file. I assume it has something to do with a hash, but I've no idea if that's the case and whether that might be what's causing the problem. Any suggestions greatly appreciated! Tangentially, is there some software used to generate these config files?

  Read the article

• Slowness on Exchange 2007 Server (network related we think)

  - by Az

  We are seeing some odd behavior out of our exchange 2007 server. I believe it is network related as during the slowness in response from the exchange server. During these times downloading files to server is fraught with connection resets and extreme slow download speeds that are not affecting other servers right on the same subnet with the same gateway and ISP. We have about 50 users at a time using Outlook 2003 from a terminal server not displaying any other signs of slowness, all network slowness is confirmed trying downloads on the exchange server itself. Checked for virus issues, there are none. Checked for hardware issues, none found I am noticing between 200-400 TCPv4 connections established I am seeing around 100k tcpv4(active) connections according to perfmon are these numbers odd? Has anyone run into anything similar? Our server has a gigbabit NIC linked to a gigabit switch using cat6 so I do not believe it is "physical". Thanks!

  Read the article

• Micro Btx Motherboard Replacement.

  - by Judy

  I got the Vundo virus that took out the mobo and hard drive on my Gateway GT5220. Is there a replacement that will work? I'm willing to keep XP. I want to fix it the cheapest way possible. The mobo is a NVIDIA GeForce 6150 AM2 microBTX with primary IDE and 4 SATA connections. I want to use a new SATA as my primary, but would like to be able to connect my old IDE drives to transfer my pictures from them to the new drive. I would appreciate any help. Thanks!

  Read the article

• Where would an S3 upload speed cap originate?

  - by CoreyH

  I do a ton of uploading to S3 and am experiencing capped speeds and I can't quite figure out how to address it. The setup: Windows Server 2008 R2 x64, external HD, using a Java based upload tool called Jsh3ll and custom VBS scripts to kick the jobs off. Running one process at a time, I am always limited to about 4mbps. I have FiOS at 35/35mbps speeds, so it isn't an outright limit. AND, I can run parallel instances and can go all the way up to 35mbps, so I know the problem isn't gateway/nic/machine/amazon related. Running parallel instances works to a degree as a solution, but increases the complexity of my workflow greatly. Solving this would make my life dramatically easier. When I was first doing this I was playing around with a bunch of Windows TCP parameters and was able to briefly get unconstrained bandwidth, but it wasn't repeatable. Thoughts?

  Read the article

• Debian PPTP VPN can't get out to the internet

  - by phidah

  I've setup a Debian pptp server which seems to be running fine. I can successfully access the local services on the server when connected to the VPN, but I cannot go out of the LAN, i.e. I cannot just go to any server out on the internet. I guess this is come kind of routing issue that won't allow me to use the server as a gateway? I couldn't really find any articles or similar that could tell me how to set this up properly. Thanks in advance.

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >