Search Results

Search found 21658 results on 867 pages for 'small business'.

Page 74/867 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

  • router only assigns small number of IPs

    - by Liam Coates
    Been having a problem with my router for a while now, might just be because it is really old but here's the problem: If a lot of computers are connected to my home network someone will get disconnected. They are assigned IPs and it seems like at a certain point (and I don't know how many) you either get assigned the same IP as someone else or something else is happening and you get disconnected - until i soft reset it and it works again which takes 30 secs. I'd say my tablet, my PC, my sisters iPad, 2 laptops and a netbook is the most that can be connected at one time so that is 6 but that should be fine. The only way I know this is the problem is because I turned on my tablet and I was online on my PC, got disconnected but my tablet was still connected, this is just after i turned the tablet on so I know my router is having difficulty with IPs, it is like it assigned the same IP to the tablet which then clashed with my desktop and knocked me off. I see that sometimes the following solves it as well so I wrote a batch file with a menu to execute these commands as I have to do it so often. ipconfig /release ipconfig /flushdns ipconfig /renew Any ideas? Or shall I just get a new router as this one is old and maybe can't handle giving out that many IPs? Cheers!

    Read the article

  • Cannot Login to SBS 2008

    - by Ryan Holt
    Hi All, I'm hoping someone has an answer for me... I installed a new Microsoft SBS 2008 server last week and everything appeared to be working normally. I went to reboot the server yesterday to finish the install for Microsoft Windows Installer 4.5 and upon reboot could no longer login to the server via either RDP or local console. The error message I get states that there are no logon servers available to service the logon request. I'm able to login to the server fine via Safe Mode with Networking but cannot login via a normal method. The server is currently at SP1. I attempted to install SP2 inside of safe mode after enabling the installation services via a registry edit but the install failed and rolled back after 2 or 3 hours. It appears that one of the services is not starting for some reason. I believe it's LSASS but can't actually login to see the active services during a normal boot. Does anyone have any suggestions?

    Read the article

  • Fax in Small Business Server 2003 fails to hang up

    - by Tim Anderson
    We have a problem with fax in SBS 2003. External modem, Courier v Everything which is a recommended model. It receives a fax OK, but then sometimes (quite often) fails to hang up. Attempts to send faxes thereafter get an engaged tone. The only fix when this happens is to reset the fax modem. Even restarting the server is not enough. We've tried with a different model modem, same problem. Any ideas? Tim

    Read the article

  • It is possible to use the Exchange 2010 web client with an Exchange 2007 mail server?

    - by michielvoo
    We are evaluating our options to upgrade our Windows SBS 2003 server. We are considering Windows SBS 2008, which comes with Exchange 2007 and an extra Windows Server 2008 Standard license. If we also bought Exchange 2010, could we install it on the Windows Server 2008 Standard machine and use the web client in combination with the Exchange 2007 server (that would be hosting the mailboxes)? Is that a supported server role for Exchange 2010? I remember reading about so called front-end server configurations, but I have no experience with that. Thanks!

    Read the article

  • Exchange backup verification shows no files

    - by Olaf
    [SBS2003SP2] If i read the exhange log it shows the backup contains no files just folders and the total size seems to be Ok. I i try to restore the folders are empty... But the 14 files that where backupped dissapeared in the verification log?! Other backups on the same medium turned out to be fine. Any idea what's wrong here? This is my log: Backup Status Operation: Backup Active backup destination: File Media name: "testbackup.bkf created 2-6-2010 at 11:25" Volume shadow copy creation: Attempt 1. Backup of "SERVER1\Microsoft Information Store\First Storage Group" Backup set #1 on media #1 Backup description: "Set created 2-6-2010 at 11:25" Media name: "testbackup.bkf created 2-6-2010 at 11:25" Backup Type: Normal Backup started on 2-6-2010 at 11:26. Backup completed on 2-6-2010 at 12:21. Directories: 4 Files: 14 Bytes: 26.842.932.104 Time: 55 minutes and 38 seconds Verify Status Operation: Verify After Backup Active backup destination: File Active backup destination: \backup\Server1\Backup Files\testbackup.bkf Verify of "SERVER1\Microsoft Information Store\First Storage Group" Backup set #1 on media #1 Backup description: "Set created 2-6-2010 at 11:25" Verify started on 2-6-2010 at 12:21. Verify completed on 2-6-2010 at 12:47. Directories: 4 Files: 0 Different: 0 Bytes: 26.842.932.104 Time: 25 minutes and 46 seconds

    Read the article

  • How to server a small image at a larger size

    - by DennyHalim.com
    We all know about hotlinking images and how to ban bad referrers, but I feel the need to take it further then that. I want to replace the hotlinked images with one huge image that's several megabytes in size. I have found a good image that's less then 100k and replaced all bad hotlinkers with it. How can I convert this image to become larger?

    Read the article

  • Can't change user security on folder - Business Objects XI 3.1

    - by Chris W
    I've got a single folder within the list of All Folders that I can't change any user permissions on. I'm logged in as an admin and when I view security for the folder it says I have full rights to the folder yet i can't change anything on it or it's sub folders even though it clearly shows me as having rights to "Modify the rights users have to objects". As a test I added a new sub-folder called Test which created ok but I'm not able to then delete the sub folder or change it's permissions either. Interestingly we changed permissions on one sub-folder last week without issue but when I check that folder today I now can't update it. Any ideas anyone?

    Read the article

  • SBD killing both cluster nodes when there are even small SAN network problems

    - by Wieslaw Herr
    I am having problems with stonith SBD in a openais-based cluster. Some background: The active/passive cluster has two nodes, node1 and node2. They are configured to provide an NFS service to users. To avoid problems with split-brain, they are both configured to use SBD. SBD is using two 1MB disks available to the hosts via an multipath fibre-channel network. The problems start if something happens with the SAN network. For example, today one of the brocade switches got rebooted and both nodes lost 2 out of 4 paths to each disks, which resulted in both nodes committing suicide and rebooting. This, of course, was highly undesirable because a) there were paths left b) even if the switch would be out for 10-20 seconds a reboot cycle of both nodes would take 5-10 minutes and all NFS-locks would be lost. I tried increasing the SBD timeout values (to 10sec+ values, dump attached at the end), however a "WARN: Latency: No liveness for 4 s exceeds threshold of 3 s" hints that something isn't working as I would it expect to. Here is what I would like to know: a) Is SBD working as it should killing nodes when 2 paths are available? b) If not, is the multipath.conf file attached correct? The storage controller we use is an IBM SVC (IBM 2145), should there be any specific configuration for it? (as in multipath.conf.defaults) c) How should I go about increasing the timeouts in SBD attachements: Multipath.conf and sbd dump (http://hpaste.org/69537)

    Read the article

  • anti-virus / malware solution for small non-profit network

    - by Jason
    I'm an IT volunteer at a local non-profit. I'm looking for a good AV/malware solution. We currently use a mishmash of different client solutions, and want to move to something centralized. There is no full time IT staff. What I'm looking for: centralized administration - server is Windows Server 2003 minimal admin overhead ability to do e-mail notification/alerts/reporting would be very cool 10-25 XP Clients (P3/P4 hardware) free or discounted solution for non-profits We can get a cheap license for Symantec Endpoint Protection. My past experience with Symantec has been bad, but I've heard good things about this product. However, I've also read that it's kind of a nightmare to setup and administer, and may not be worth it for the size of our network.

    Read the article

  • Bootable SD card still has small memory, even after formating

    - by Inazuma
    I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

    Read the article

  • Small TCP Window on WAN between 2 Locations

    - by Brent
    Site A: Denver datacenter. 60MBPS. Site B: Chicago. 100MBPS. ICMP pings: Packets: Sent = 176, Received = 176, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 74ms, Maximum = 94ms, Average = 75ms File transfer between sites that never goes past ~7MBPS: Windows Update download at 60MBPS+: Site to site: IPSec VPN using two Cisco 5520's. CPU at 3-4% and lots of memory to spare. The latency between to two sites is very acceptable so I can't see an issue why it is performing so slow when transferring between the two sites. I have found that any type of transfer (FTP, HTTP, Windows file shares) will never go above ~7MBPS. When the WAN was first setup, I was able to get transfers at 50-60MBPS, which is what is expected due to the WAN connection at the Site A at 60MBPS. Then a few days later, I was not able to get anything going faster than ~7MBPS. Is there a upstream router between Denver and Chicago causing this? I want to take the blame away from our setup as downloads from Windows Update go blazing fast and for the first few days after the site to site VPN came up, I was transferring VM images at 50-60MBPS. Our stack: HP P2000 MSA - HP C7000 Chassis - HP Flex-10 - Cisco Gigabit switch - Cisco ASA - WAN

    Read the article

  • Best Small Linux Distribution for rDesktop

    - by d2jxp
    What would be the best linux distribution to use just for the purpose of rDesktop? We're trying to decide if we should get rid of old computers or just use them as thin-clients to connect to virtual Windows 7 machines on our network. I would like something with as little bloat as possible and can be run from a USB flash drive. I have tried SliTaz, ThinStation, and Pixil from Century Software. SliTaz has been my favorite so far but I still want to know if there's something better that's also easily customizable.

    Read the article

  • Most scalable way of serving a small set of static HTTP content

    - by Ekevoo
    The story: Hi guys. I'm among the people responsible for serving the results of the most anticipated (by number of people participating) annual entrance exam in my state. As such, when our results are published, the interest is overwhelming. In the past we delegated the responsibility of serving the results to the media, but that spoils a little the officialness of these results. This year we went with a little (long overdue) experiment of using lighttpd instead of Apache as well as other physical network optimizations I wasn't directly involved with. The results were very satisfactory. The server didn't choke even once, nor we saw any of the usual Twitter complaints on unavailability and/or slowness that were previously common. However, because we still delegated the first publication of the results to the media I'm still not 100% sure we can handle the load of actually publishing the results first. The question: Now because these files are like 14MB in total and a true lightweight Linux distribution isn't that big either, I'm thinking: what if next year we run full RAMdrive? Is there any? Is that useful? Is that worth it for a team that uses Debian almost exclusively? Are there other optimizations that I should be focusing on instead?

    Read the article

  • Small business VPN solution

    - by Crash893
    I've been looking for a while but I'd like to to implement a vpn solution for anywhere from 1-5 employees at a time (possibly 10 in a year or so) edit: Basically I would like outside users to fire up a client or open a web page and be able to access things inside the company network (share drives / printers/ webapps /etc) I've looked at Astaro Gateway but im not sure if that's the right tool for the job. I know "best" is a subjective term so i would like to break it into to different suggestions 1) what is the cheapest solution given the criteria above 2) what solution will result in the least amount of headaches from the point of view of maintenance and learning curve.

    Read the article

  • Software for printing small photos on larger paper with easy layout snapping

    - by ldigas
    Have some photos and pictures to print (graphs, but that doesn't matter here). So far when printing I inserted them in MS Word, played with layout on the paper, and after half a day, finally managed to get it just right. Usually then, the power runs out :-) Anyways, does anyone know of any software which enables me to easily put up some kind of a layout (one under the other, or some rectangular grid) where I can just "snap" photos next to each other, before printing the whole thing. I know I can do that in pretty much any photo editing program, but the problem is that that pixel hunting takes time ... and is generally a very annoying process, expecially when you don't want to edit the photos in mind, just print them out. Anyways, I'm sure you get the general idea ... Suggestions ?

    Read the article

  • SQL Server plus small files

    - by user1467163
    I have a MSSQL server, 3 volumes, that runs some processes that seem to take way too long. One of these processes reads in a zip file, then writes to a database based on what's in the zip file.... for each record. I have 2 volumes in use and am creating the third- so I am trying to plan how to do this. OS has to remain on vol. 1. The TLogs should probably go on the new volume and the mdf's on the existing vol.2.. Do I put the file store on the volume with the MDF's so they don't interfere with the TLog writes, or with the TLogs so they don't interfere with the TLog flush to the MDFs? I know it's best to have more servers / volumes but I have to make do with whats on hand for now. I appreciate any suggestions.

    Read the article

  • Is drupal going to improve these small features ?

    - by Patrick
    Is drupal going to improve the following features ? 1) multi-line description for CCK fields such as images (at the moment I can only write in a line but a text-area would be better 2) thumbnails upload for CCK Video fields (so I can upload a thumbnails for each video if I cannot install ffmpeg on the server) 3) merge CCK Images and Videos in a single group. So my customer can order them in the same list by dragging and dropping them, and in my front-end I have them ordered in the same list. This would be very useful for me. Do you know if I can get some of theme with some modules maybe ? thanks

    Read the article

  • Can SBS2003 Monitoring and Reporting service work without Exchange?

    - by Magnetic_dud
    Hi, we have an SBS2003 server. Recently I decided to switch to hmailserver as i feel it's better than exchange 2003, so i disabled it. Of course i don't receive the Monitoring and Reporting emails from my server anymore, there is a way to change the setting? I think it directly interacts with Exchange, but maybe there is an smtp option out there Otherwise there is an alternative? I tried the paessler monitor on a vm, but i feel it's too much for my use: i just need to get a daily report of the security violations in the event log and something else

    Read the article

  • SBS DC DNS entries going missing?

    - by Chris W
    I've been looking at a problem on a friends SBS (2003) server where the client PC's aren't able to connect to the server with a variety of errors reported. Checking the server itself the only indicator of an issue is an error 5782: Dynamic registration or deregistration of one or more DNS records failed with the following error: No DNS servers configured for the local system. Running a dcdiag reports that there are no DNS records registered for the DC so I fixed the problem by doing a netdiag /fix after which the dcdiag comes back clean and clients are ok again. It happened a few weeks ago as well and the same fix solved it. What are the possible causes of the DC DNS entries going missing? Is this a config option that needs tweaking or could it be solved by something simple like scheduling the SBS server to re-boot periodically? The only change they can think of that was made near to the time of the first instance of this problem occurring is that RRAS was started up to allow for a VPN connection from a home user. NB - The server is setup with a pair of NICs in a team so the server has a single virtual NIC providing both LAN/WAN connections to it. An external hardware firewall is in use rather than the windows firewall.

    Read the article

  • Word to GIMP pasted image too small

    - by Marcelo Cantos
    I paste an image from Microsoft Word 2010 into GIMP 2.6.10 using Edit ? Paste as ? New Image, but the pasted image is less than half-size (1280×800 down to 553×347). Pasting into an existing blank 1280×800 image makes no difference. On the other hand, pasting exactly the same clipboard entry into Windows Paint works beautifully, producing a razor-sharp 1280×800 image, and furthermore, pressing Ctrl+C in Paint, then going to Gimp and pressing Shift+Ctrl+V in Gimp produces the correct full-size image in Gimp too. Why does pasting an image directly from Word to Gimp reduce the image size? How can I make it paste the correct image size without having to go via Paint? UPDATE: I just noticed that cutting the image from Word and pasting back into the same document also loses definition. Paint must be magical.

    Read the article

  • Best idea dataserver serving small pictures 40 ko

    - by Nicolas Manzini
    I'm designing the server structure for my application in case things go well. I have one server DB connected to multiple server who process connections. All those with lots of RAM and fast processors. (still looking for a way to use the multithread because now it's dumb apache php... so loooots of ram needed). Upon an answer from those servers, the client can then connect to another server to retrieve pictures using the address he previously got from the db. Is it a good idea to have one database server with let's say nginx and ssd disk having to send all pictures to everybody? or should I have multiple server accessing to a shared ssd disk drive or multiple disk updating each other? Also should I put a lot of RAM on the database server? because probably there wont be a picture more popular than another.

    Read the article

  • Locked out of our Comcast Business Gateway for seemingly no reason

    - by Tyler
    A little backstory... Last fall we migrated our ISP from AT&T to Comcast at one of our offices. At that time, we received a new modem/router from Comcast and we configured everything to our liking. We've never really had very many issues with the router aside from having to restart it every once in a while. Here's the problem... About three months ago I changed the password on the router from the default. After that, I logged into the router several times to make changes with no issue. During May I logged into the router to add two new static routes, no problems. A week ago, I tried to log into the router and could not. I tried the non-default password that I changed it to, the default, anything and everything I could think of and no luck. I restarted the router on Monday thinking it may just be locked up, but after the restart it would still not let me log in. This router is at our other office about 2 hours from here and I want to avoid having to drive down there and reset to factory defaults, reconfigure, etc. Any ideas?

    Read the article

  • Moving a lot of small files between servers using rsync

    - by Adirael
    Hello guys, I'm moving a lot of files (about 2 millions) between two servers on different locations using rsync over ssh, it seems to work fine but I just realised I'm losing some files on the process. I got server 1, with the original data, and server 2, with the copy. Server 1 runs CentOS 5 and Server 2 runs on Ubuntu 10. I'm doing the transfer on the Server's 2 command line like this: rsync -e ssh -avzn usr@server1:/remote/path /local/path The first file movement I did using tar, but I didn't though of piping it through ssh and it failed cause the disk on server 1 was almost full, so I transfered it anyways (it was about 200GB) and got about 80% of the files. Then I piped another tar with the rest of the files (they're in folders, I got 100 folders with about 30 subfolders each, with files inside) and now I got everything on server 2. I wanted to be sure, so I my two options are getting the md5sum of all the files and check them or running an rsync on server 2 against server 1, that's what I did. It got some missing stuff and now it says there's nothing more to do (DRY RUN). But I got at least two files that are missing inside a subfolder. I ran that same rsync on that folder, but still dry run. Am I doing something wrong? Thanks, and sorry for the wall of text.

    Read the article

  • how to make a small image become really huge

    - by DennyHalim.com
    all webmaster should already know about hotlinking stuffs. and we know how to ban those bad referer too... but i want to get revenge... i want to replace the hotlinked images with one huge image with few megs in size. i have found one good image. yet it less than 100k. i already use it to replace all bad hotlinkers. how can i convert this image to become few megs?

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >