Search Results

Search found 2066 results on 83 pages for 'cable'.

Page 77/83 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Automount of external hard disk

  - by moose

  I have an Intenso 6002560 1TB Memory Station - an external hard disk. This hard disk gets connected via Y-USB cable. When I connect both USB-ends to my Notebook, it gets recognized by my Ubuntu 10.04.4 LTS system: moose@pc07:~$ lsusb [...] Bus 002 Device 005: ID 13fd:1840 Initio Corporation [...] and Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065e10 Device Boot Start End Blocks Id System /dev/sda1 * 1 37810 303704064 83 Linux /dev/sda2 37810 38914 8864769 5 Extended /dev/sda5 37810 38914 8864768 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0d6ea32a Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976759008+ c W95 FAT32 (LBA) But it did not get mounted: moose@pc07:/dev$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) However, I could mount it manually with mount -t vfat /dev/sdc1 /mnt/sdc1 as you can see here: moose@pc07:~$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) /dev/sdc1 on /mnt/sdc1 type vfat (rw) edit: Another command: moose@pc07:~$ sudo blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 moose@pc07:~$ blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 /dev/sdc1 /mnt/sdc1 edit: another command: moose@pc07:~$ ls -l /dev/disk/by-uuid/ total 0 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 45eb611b-517e-425b-8057-0391726cccd5 -> ../../sda1 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 e9dc42f3-594c-4b62-874a-305eda5eed41 -> ../../sda5 Here is a link to a Launchpad question about this problem. But I would like it to mount automatically. What do I have to do?

  Read the article

• The Evolution of Television and Home Entertainment

  - by Bill Evjen

  This is a group that is focused on entertainment in the aviation industry. I am attending their conference for the first time as it relates to my job at Swank Motion Pictures and what we do for our various markets. I will post my notes here. The Evolution of Television and Home Entertainment by Patrick Cosson, Veebeam TV has been the center of living rooms for sometime. Conversations and culture evolve around the TV. The way we consume this content has dramatically been changing. After TV, we had the MTV revolution of TV. It has created shorter attention spans, it made us more materialistic, narcissistic, and not easily impressed. Then we came to the Internet. The amount of content has expanded. It contains a ton of user-generated content, provides filtering, organization, distribution. We now have a problem. We are in the age of digital excess. We can access whatever we want. In conjunction with this – we are moving. The challenge we have now is curation. The trends  we see: rapid shift from scheduled to on demand consumption. A move to Internet protocols from cable Rapid fragmentation of media a transition from the TV set to a variety of screens Social connections bring mediators and amplifiers. TiVo – the shift to on demand It is because of a time-crunch Provides personal experiences Once old consumption habits are changed, there is no way back! Experiences are that people are loading up content and then bringing it with them on planes, to hotels, etc. Rapid fragmentation of media sources Many new professional content sources and channels, the rise of digital distribution, and the rise of user-generated content contribute to the wealth of content sources and abundant choice. Netflix, BBC iPlayer, hulu, Pandora, iTunes, Amazon Video, Vudu, Voddler, Spotify (these companies didn’t exist 5 years ago). People now expect this kind of consumption. People are now thinking how to deliver all these tools. Transition from the TV set to multi-screens The TV screen has traditionally been the dominant consumption screen for TV and video. Now the PC, game consoles, and various mobile devices are rapidly becoming common video devices. Multi-screens are now the norm. Social connections becoming key mediators What increasingly funnels traffic on the web, social networking enablers, will become an integral part of the discovery, consumption and sharing model for Television. The revolution will be broadcasted on Facebook and Twitter. There is business disruption There are a lot of new entrants Rapid internationalization Increasing competition from existing media players A fragmenting audience base Web browser Freedom to access any site The fight over the walled garden Most devices are not powerful enough to support a full browser PC will always be present in the living room Wireless link between PC and TV Output 1080p, plays anything, secure Key players and their challenges Services Internet media is increasingly interconnected to social media and publicly shared UGC Content delivery moving to IPTV Rights management issues are creating silos and hindering a great user experience and growth Devices Devices are becoming people’s windows into all kinds of media from all kinds of sources There won’t be a consolidation of the device landscape, rather the opposite Finding the right niche makes the most sense. We are moving to an on demand world of streaming world. People want full access to anything.

  Read the article

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• Xsigo and Oracle's Storage

  - by Philippe Deverchère

  Xsigo, a virtual network infrastructure provider, has recently been acquired by Oracle. Following this acquisition, one might ask ourselves why it is important to Oracle and how Oracle's storage is going to benefit on the long term from this virtualized infrastructure layer. Well, the first thing to understand is that Virtual Networking addresses both network and storage connectivity. Oracle Virtual Networking, as the Xsigo technology is now called, connects any server to any network and storage, so this is not just about connecting servers to the Internet or Intranet. It is also for a large part connecting servers to NAS and SAN storage. Connecting servers to storage has become increasingly complex in the past few years because of the strong emergence of virtualization at the Operating System level. 50% of enterprise workloads are now virtualized, up from 18% in 2009, resulting in a strong consolidation of various applications in a high density server footprint. At the same time, server I/O capability increased 8x in the last 8 years. All this has pushed IT administrators to multiply the number of I/O connections in the back-end of their physical servers, resulting in a messy and very hard to manage networking infrastructure. Here is a typical view of a rack back-end when no virtual networking is used. We consider that today: - 75% of users have ten or more Ethernet ports per server - 85% of users have two or more SAN ports per server - 58% have had to add connectivity to a server specifically for VMs - 65% consider cable reduction a priority The average is 12 or more ports per server, resulting in an extremely complex infrastructure to manage. What Oracle wants to achieve with its Oracle Virtual Networking offering is pretty simple. The objective is to eliminate the complexity through a dramatic reduction of cabling between servers and storage/networks. It is also to provide a software based management system so that any server can be connected to any network or any storage, on demand, and without physical intervention on the infrastructure. At the end of the day, the picture on the left shows what one wants to get for the back-end of customer's racks: just a couple of connections on each physical server to provide a simple, agile and fast network infrastructure for both storage and networking access. This is exactly what the Oracle Virtual Networking solution does. It transforms a complex, error-prone, difficult to manage and expensive networking infrastructure into a simple, high performance and agile solution for the data center. Practically speaking, and for the sake of simplicity, imagine that each server just hosts a minimal number of physical InfiniBand HCAs (Host Channel Adapter) with two links (for redundancy) onto the Oracle Fabric Interconnect director. Using the Oracle Fabric Manager software, you'll then be able to create virtual NICs and HBAs (called vNIC and vHBA) that will be seen by the servers as standard NICs and HBAs and associate them to networks and storage systems which are physically connected to the back-end of the director through standard Fibre Channel and Ethernet GbE/10GbE ports. In addition to this incredibly simple "at-a-click" connectivity capability, the Oracle Virtual Networking solution offers powerful features such as network isolation, Quality of Service, advanced performance monitoring and non-disruptive reconfiguration, migration and scalability of networking infrastructure. So let's go back now to our initial question: why is Oracle Virtual Networking especially important to Oracle's storage solutions? After all, one could connect any storage in the back-end of the Oracle Fabric Interconnect directors, right? The answer is pretty simple: since Oracle owns both the virtualized networking infrastructure and the storage (ZFS-SA, Pillar Axiom and tape), it is possible to imagine several ways in the future to add value when it comes to connect storage to a virtualized storage network: enhanced storage capabilities, converged management between storage and network, improved diagnostic capabilities and optimized integration resulting in higher performance and unique features/functions. Of course, all this is not going to be done overnight, and future will tell us is which evolutions come first. But there is little doubt that the integration of Xsigo within Oracle is going to create opportunities for Oracle's storage!

  Read the article

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

  - by el10780

  After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

  Read the article

• Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect

  - by user287529

  Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect. I'm using Ubuntu 12.04 on an Acer Aspire 5742-7645 laptop with 4GB memory, Intel Core i3 processor, Intel HD Graphics, DVD drive, 802.1 b/g/n, and 500 GB HD. I connect to my router via a wireless connection. I have installed Virutalbox 4.1.12 from the Ubuntu Software Center and installed Guest additions 4.1.12 in the Windows 7 guest session. I have Windows XP and Windows 7 installed as guests in Virtual box The network settings are different for XP and 7 – see below. Network Settings XP guest = Adapter 1: PCnet-FAST III (NAT) - Network works perfectly and has worked well for several years. Network Settings Win 7 = Adapter 1: Intel PRO/1000 MT Desktop (Bridged adapter, eth1) Promiscuous Mode = allow all Cable connected = checked When I originally installed Windows 7, I tried NAT and the guest network would not connect. Once I changed the setting to the above (Bridged) the Network worked perfectly. However, what I believe is after updates (not sure if it was an Ubuntu or Windows update) the guest network stopped working and I can not get it to connect. Interfaces file content auto lo iface lo inet loopback Ifconfig yields lou@lou-Aspire-5742:~$ ifconfig eth0 Link encap:Ethernet HWaddr 1c:75:08:09:f6:5c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 Link encap:Ethernet HWaddr 4c:0f:6e:7c:9f:01 inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4e0f:6eff:fe7c:9f01/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18095 errors:2 dropped:0 overruns:0 frame:24344 TX packets:9281 errors:47 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5301926 (5.3 MB) TX bytes:1441885 (1.4 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3208 errors:0 dropped:0 overruns:0 frame:0 TX packets:3208 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:294088 (294.0 KB) TX bytes:294088 (294.0 KB) Ipconfig yields the following: Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::38ba:dbca:a21d:c3d1%13 Autoconfiguration IPv4 Address. . : 169.254.195.209 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{B292E440-679D-4FC5-8E34-77D6804669C8}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : I'm not sure what else to do. Can someone provide the troubleshooting steps to determine what the problem is and possible solution?

  Read the article

• It happens only at Devoxx ...

  - by arungupta

  After attending several Java conferences world wide, this was my very first time at Devoxx. Here are some items I found that happens only at Devoxx ... Pioneers of theater-style seating - This not only provides comfortable seating for each attendee but the screens are very clearly visible to everybody in the room. Intellectual level of attendees is very high - Read more explanation on the Java EE 6 lab blog. In short, a lab, 1/3 of the content delivered at Devoxx 2011, could not be completed at other developer days in more than 1/3 the time. Snack box for lunches - Even though this suits well to the healthy lifestyle of multiple-snacks-during-a-day style but leaves attendees hungry sooner in the day. The longer breaks before the next snack in the evening does not help at all. Fortunately, Azure cupcakes and Android ice creams turned out to be handy. I finally carried my own apple :-) Wrist band instead of lanyard - The good part about this is that once tied to your hand then you are less likely to forget in your room. But OTOH you are a pretty much a branded conference attendee all through out the city. It was cost effective as it costed 20c as opposed to 1 euro for the lanyard. Live streaming from theater #8 (the biggest room) on parleys.com All talks recorded and released on parleys.com over next year. This allows attendees to not to miss any session and watch replay at their own leisure. Stephan promised to start sharing the sessions by mid December this year. No need to pre-register for a session - This is true for most of the conferences but bigger rooms (+ overflow room for key sessions) provide sufficient space for all those who want to attend the session. And of course all sessions are available on parleys.com anyway! Community votes on whiteboard - Devoxx attendees gets a chance to vote on topics ranging from their favorite non-Java language, operating system, or love from Oracle. Captured pictures at the end of Day 2 are shown below. Movie on the last but one night - This year it was The Adventures of Tintin and was lots of fun. Fries with mayo - This is a typical Belgian thing. Guys going in ladies room to avoid the long queues ... wow! Tweet wall everywhere and I mean literally everywhere, in rooms, hallways, front desk, and other places. The tweet picking algorithm was not very clear as I never saw my tweet appear on the wall ;-) You can also watch it at wall.devoxx.com. Cozy speaker dinner with great food and wine List of parallel and upcoming sessions displayed on the screen - This makes the information more explicit with the attendees. REST API with multiple mobile clients - This API is also used by some other conferences as well. And there always is iphone.devoxx.com. Steering committee members were recognized multiple times. The committee members were clearly identifiable wearing red hoodies. The wireless SSID was intuitive "Devoxx" but hidden to avoid some crap from Microsoft Windows. All of 9000 addresses were used up most of the times with each attendee having multiple devices. A 1 GB fibre optic cable was stretched to Metropolis to support the required network bandwidth. Stephan is already planning to upgrade the equipment and have a better infrastructure next year. Free water, soda, juice in a cooler Kinect connected to TV screens so that attendees can use their hands to browse through the list of sesssions. #devoxxblog, #devoxxwomen, #devoxxfrance, #devoxxgreat, #devoxxsuggestions And Devoxx attendees are called Devoxxians ... how cool is that ? :-) What other things do you think happen only at Devoxx ? And now the pictures from the community whiteboard: And a more complete album (including bigger pics of community votes) is available below:

  Read the article

• Test your internet connection - Emtel Fixed Broadband

  Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

  Read the article

• Extreme Makeover, Phone Edition: Comcasts xfinity

  Mobile Makeover For many companies the first foray into Windows Phone 7 (WP7) may be in porting their existing mobile apps. It is tempting to simply transfer existing functionality, avoiding the additional design costs. Readdressing business needs and taking advantage of the WP7 platform can reduce cost and is essential to a successful re-launch. To better understand the advantage of new development lets examine a conceptual upgrade of Comcasts existing mobile app. Before Comcast has a great mobile app that provides several key features. The ability to browse the lineup using a guide, a client for Comcast email accounts, On Demand gallery, and much more. We will leverage these and build on them using some of the incredible WP7 features.   After With the proliferation of DVRs (Digital Video Recorders) and a variety of media devices (TV, PC, Mobile) content providers are challenged to find creative ways to build their brands. Every client touch point must provide both value added services as well as opportunities for marketing and up-sale; WP7 makes it easy to focus on those opportunities. The new app is an excellent vehicle for presenting Comcasts newly rebranded TV, Voice, and Internet services. These services now fly under the banner of xfinity and have been expanded to provide the best experience for Comcast customers. The Windows Phone 7 app will increase the surface area of this service revolution.   The home menu is simplified and highlights Comcasts Triple Play: Voice, TV, and Internet. The inbox has been replaced with a messages view, and message management is handled by a WP7 hub. The hub presents emails, tweets, and IMs from Comcast and other viewers the user follows on Twitter.  The popular view orders shows based on the users viewing history and current cable package. The first show Glee is both popular and participating in a conceptual co-marketing effort, so it receives prime positioning. The second spot goes to a hit show on a premium channel, in this example HBOs The Pacific, encouraging viewers to upgrade for this premium content. The remaining spots are ordered based on viewing history and popularity. Tapping the play button moves the user to the theatre where they can watch previews or full episodes streaming from Fancast. Tapping an extra presents the user with show details as well as interactive content that may be included as part of co-marketing efforts. Co-Marketing with Dynamic Content The success of Comcasts services are tied to the success of the networks and shows it purveys, making co-marketing efforts essential. In this concept FOX is co-marketing its popular show Glee. A customized panorama is updated with the latest gleeks tweets, streaming HD episodes, and extras featuring photos and video of the cast. If WP7 apps can be dynamically extended with web hosted .xap files, including sandboxed partner experiences would enable interactive features such as the Gleek Peek, in which a viewer can select a character from a panorama to view the actors profile. This dynamic inline experience has a tailored appeal to aspiring creatives and is technically possible with Windows Phone 7.   Summary The conceptual Comcast mobile app for Windows Phone 7 highlights just a few of the incredible experiences and business opportunities that can be unlocked with this latest mobile solution. It is critical that organizations recognize and take full advantage of these new capabilities. Simply porting existing mobile applications does not leverage these powerful tools; re-examining existing applications and upgrading them to Windows Phone 7 will prove essential to the continued growth and success of your brand.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Wireless connection works but the internet is too slow to use in Ubuntu 11.04

  - by Garrin

  The internet is so slow as to be unusable. And I'm not being picky. Even after minutes I can't get my Google home page to load. I tried installing a package through apt-get and was getting rates between 0 and a few hundred bytes/s. That's bytes, not kilobytes! Mostly 0 however (no exaggeration, it spends large amounts of time stalled). And I would go to a speed test web site of some kind but I can't since nothing will load. Briefly put, the laptop I am using was connected to two wireless networks while using Ubuntu 11.04 without any issues before this. It was also connected to a wired network without any issues. It dual boats Windows 7 which has never had any issues, not even with the current wireless network. Just to be clear, on the current wi-fi network, Windows 7 encounters no issues (speedtest.net puts the network speed at 1mb/s) but my network connection in Ubuntu 11.04 is so slow as to literally be unusable. I am unfamiliar with the router except for the fact that it boasts a Rogers logo (that's a large ISP/cable provider in Canada for those not familiar with the land of igloos and polar bears). I am far from the router and some desktop widget I use tells me the signal strength is at 58% (it seems fairly reliable and this would appear to match up with the filled bars in the network icon). I should also mention I'm just renting a room in this house so I'm not the network administrator and while I can access the 192.168.0.1 router page, the password wasn't set to 'password' so it's not much use to me. Here are a bunch of commands I ran which don't tell me a whole lot but I thought might be more instructive to the wise around here: lspci (just showing my network card): 05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) This one is self explanatory. PING www.googele.com (216.65.41.185) 56(84) bytes of data. 64 bytes from nnw.net (216.65.41.185): icmp_req=1 ttl=51 time=267 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=2 ttl=51 time=190 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=3 ttl=51 time=212 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=4 ttl=51 time=207 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=5 ttl=51 time=220 ms --- www.googele.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 190.079/219.699/267.963/26.121 ms ifconfig eth0 Link encap:Ethernet HWaddr 20:6a:8a:02:20:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 B) TX bytes:960 (960.0 B) wlan0 Link encap:Ethernet HWaddr 20:7c:8f:05:c6:bf inet addr:192.168.0.16 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::227c:8fff:fe05:c6bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:982 errors:0 dropped:0 overruns:0 frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:497250 (497.2 KB) TX bytes:95076 (95.0 KB) Thank you

  Read the article

• Changing the Operating System with only Ubuntu installed

  - by Games Brainiac

  I really wanted to dive into the world of Open Source operating systems, so I downloaded the latest version of Ubuntu (13.10), and installed it on a clean(no operating system installed, absolutely nothing) Lenovo ThinkPad machine. After a few days, I wanted to try out a different Operating System (Elementary OS). I downloaded the ISO file, burned it to a USB, tested that the USB booted from a different computer (I have 2, one is the Lenovo, the other a HP). I was able to get the bootscreen, and everything worked like a charm after I set the BIOS to boot from USB Disk Drive instead of HD. After this, I went back to Lenovo, and tried to open up the boot menu, by pressing F12, so that I could load from a temporary device. To my surprise, nothing but the HD was listed. There was no Optical Drive, No USB Drive, absolutely nothing. So, I thought that these devices were probably disabled. So I went into my BIOS and checked to see what was the case. I saw that all my devices were enabled. USB and all the other devices such as network cable and the rest were all enabled. So, I thought this probably had something to do wit UEFI and Legacy Boot options. So, I made sure that both were enabled. This did not solve the problem either. Again, I got nothing but the option to boot from my Hard Disk. I thought the USB had to be at fault. I tried different ports, but to no avail. Next, I tried with a Live CD, which had Ubuntu on it. This failed too. I simply could not boot from anything other than my hard disk. Okay, so at this point, I was pretty desperate, so I installed Boot-Repair through: sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install boot-repair What this did is lead me to GRUB. Ideally, its just a screen that gives me the option to load from Ubuntu or Advanced Settings. The Advanced settings had nothing but Ubuntu options in it. So, I kept on pressing ESC and that led me to the the grub console, and thats where I am right now with my Lenovo. I've also tried updating the BIOS, but Lenovo only has packages for Red Hat and Windows. So, a dead end there too. Right now, I need to know if there is any way that I can just delete everything from my Lenovo? I want to revert it back to its blank factory condition. How can I achieve this? I have tried to elaborate my problem as best I could. If there is any important information that I've missed out, please do not hesitate to leave a comment. I would have included some screen shots, but BIOS screen shots are a little hard to manage. However, I can provide a camera Image of the boot screen if needed (doing that as we speak).

  Read the article

• EPPM Is a Must-Have Capability as Global Energy and Power Industries Eye US$38 Trillion in New Investments

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} “The process manufacturing industry is facing an unprecedented challenge: from now until 2035, cumulative worldwide investments of US$38 trillion will be required for drilling, power generation, and other energy projects,” Iain Graham, director of energy and process manufacturing for Oracle’s Primavera, said in a recent webcast. He adds that process manufacturing organizations such as oil and gas, utilities, and chemicals must manage this level of investment in an environment of constrained capital markets, erratic supply and demand, aging infrastructure, heightened regulations, and declining global skills. In the following interview, Graham explains how the right enterprise project portfolio management (EPPM) technology can help the industry meet these imperatives. Q: Why is EPPM so important for today’s process manufacturers? A: If the industry invests US$38 trillion without proper cost controls in place, a huge amount of resources will be put at risk, especially when it comes to cost overruns that may occur in large capital projects. Process manufacturing companies must not only control costs, but also monitor all the various contractors that will be involved in each project. If you’re not managing your own workers and all the interdependencies among the different contractors, then you’ve got problems. Q: What else should process manufacturers look for? A: It’s also important that an EPPM solution has the ability to manage more than just capital projects. For example, it’s best to manage maintenance and capital projects in the same system. Say you’re due to install a new transformer in a power station as part of a capital project, but routine maintenance in that area of the facility is scheduled for that morning. The lack of coordination could lead to unforeseen delays. There are also IT considerations that impact capital projects, such as adding servers and network cable for a control system in a power station. What organizations need is a true EPPM system that’s not just for capital projects, maintenance, or IT activities, but instead an enterprisewide solution that provides visibility into all types of projects. Read the complete Q&A here and discover the practical framework for successfully managing this massive capital spending.

  Read the article

• Nexus One & Windows XP USB Driver

  - by Stefan

  I've been unable to get my Nexus One working as a development phone on Windows XP. I've got the driver (revision 3 for N1 support), I've got it installed according to the official installation guide, and the phone appears in the Device Manager just as the guide says it should. However, adb still can't find the phone. 'adb devices', for example, returns no active devices. Am I forgetting some basic step? One thing I've noticed is that the driver is labeled in Windows as version 2 released November, 2009 (I need version 3 from January 2010 for N1 support). However, I've never had version 2 installed. I've used the SDK to download version 3 several times - even deleted it and redownloaded it. I've uninstalled/reinstalled the version 3 driver multiple times. It still says version 2. Is this the problem, or this something completely unrelated? Note: The phone is working as a dev phone on Ubuntu, so I know the phone/cable/etc. are good. It's either my fault or the driver's.

  Read the article

• Print raw data to a thermal-printer using .NET

  - by blauesocke

  I'm trying to print out raw ascii data to a thermal printer. I do this by using this code example: http://support.microsoft.com/kb/322091 but my printer prints always only one character and this not until I press the form feed button. If I print something with notepad the printer will do a form feed automatically but without printing any text. The printer is connected via usb over a lpt2usb adapter and Windows 7 uses the "Generic - Generic / Text Only" driver. Anyone knows what is going wrong? How is it possible to print some words and do some form feeds? Are there some control characters I have to send? And if yes: How do I send them? Edit 14.04.2010 21:51 My code (C#) looks like this: PrinterSettings s = new PrinterSettings(); s.PrinterName = "Generic / Text Only"; RawPrinterHelper.SendStringToPrinter(s.PrinterName, "Test"); This code will return a "T" after I pressed the form feed button (This litte black button here: swissmania.ch/images/935-151.jpg - sorry, not enough reputation for two hyperlinks) Edit 15.04.2010 16:56 I'm using now the code form here: c-sharpcorner.com/UploadFile/johnodonell/PrintingDirectlytothePrinter11222005001207AM/PrintingDirectlytothePrinter.aspx I modified it a bit that I can use the following code: byte[] toSend; // 10 = line feed // 13 carriage return/form feed toSend = new byte[1] { 13 }; PrintDirect.WritePrinter(lhPrinter, toSend, toSend.Length, ref pcWritten); Running this code has the same effekt like pressing the form feed button, it works fine! But code like this still does not work: byte[] toSend; // 10 = line feed // 13 carriage return/form feed toSend = new byte[2] { 66, 67 }; PrintDirect.WritePrinter(lhPrinter, toSend, toSend.Length, ref pcWritten); This will print out just a "B" but I expect "BC" and after running any code I have to reconnect the USB cable to make it work agian. Any ideas?

  Read the article

• Serial Communication between Java RXTX and Arduino

  - by SharpBarb

  I'm trying to communicate between my PC (Windows 7 using Netbeans and RXTX) with an Arduino Pro, using the serial port. The Arduino is actually connected to the PC using an FTDI cable. The code is based on the Java SimpleRead.Java found here. Currently the Arduino simply prints out a string when it starts up. My Java program should print the number of bytes that have been read and then print out the contents. The Java program works, sort of... If the string is long (10 bytes or so) the output will get broken up. So if on the Arduino I print Serial.println("123456789123456789"); //20 bytes including '\r' and '\n' The output of my Java program may look something like: Number of Bytes: 15 1234567891234 Number of Bytes: 5 56789 or Number of Bytes: 12 1234567891 Number of Bytes: 8 23456789 I'm thinking it's a timing problem, because when I manually go through the code using the debugger, the result string is always what it should be: one 20 byte string. I've been messing with various things but I haven't been able to fix the problem. Here is the part of the code that is giving me problems: static int baudrate = 9600, dataBits = SerialPort.DATABITS_8, stopBits = SerialPort.STOPBITS_1, parity = SerialPort.PARITY_NONE; byte[] readBuffer = new byte[128]; ... ... public void serialEvent(SerialPortEvent event) { if (event.getEventType() == SerialPortEvent.DATA_AVAILABLE) { try { if (input.available() > 0) { //Read the InputStream and return the number of bytes read numBytes = input.read(readBuffer); String result = new String(readBuffer,0,numBytes); System.out.println("Number of Bytes: " + numBytes); System.out.println(result); } } catch (IOException e) { System.out.println("Data Available Exception"); } }

  Read the article

• Entity Framework Multiple associations to a table causes error 3033

  - by taylonr

  I'm using EF 3.5 SP1. I have 3 tables: Pendants PendantAccessories PartsData Basically #1 and 2 are used for product selection, so #1 has a "Number of Buttons" property and other options. #2 has fields like "Cable Type" etc. The third table contains property information for all of our parts, such as what plant it's manufactured in, it's weight etc. What I'm trying to do is set up an association between #1 and #3 and also between #2 and #3. The PK in all 3 tables is the PartNumber. I set it up between #2 and 3 by going into Mapping Details and adding a Maps to PartsData and mapping the columns. Everything worked good. I then tried the same thing between #1 and 3. However, now when I compile I get "Error 3033: Problem in Mapping Fragment starting at line 713: EntitySets 'pendants' and 'pendantAccessories' are both mapped to the table 'PartsData'. Their Primary Keys may collide." Does anyone know what I'm doing wrong here?

  Read the article

• Are Large iPhone Ping Times Indicative of Application Latency?

  - by yar

  I am contemplating creating a realtime app where an iPod Touch/iPhone/iPad talks to a server-side component (which produces MIDI, and sends it onward within the host). When I ping my iPod Touch on Wifi I get huge latency (and a enormous variance, too): 64 bytes from 192.168.1.3: icmp_seq=9 ttl=64 time=38.616 ms 64 bytes from 192.168.1.3: icmp_seq=10 ttl=64 time=61.795 ms 64 bytes from 192.168.1.3: icmp_seq=11 ttl=64 time=85.162 ms 64 bytes from 192.168.1.3: icmp_seq=12 ttl=64 time=109.956 ms 64 bytes from 192.168.1.3: icmp_seq=13 ttl=64 time=31.452 ms 64 bytes from 192.168.1.3: icmp_seq=14 ttl=64 time=55.187 ms 64 bytes from 192.168.1.3: icmp_seq=15 ttl=64 time=78.531 ms 64 bytes from 192.168.1.3: icmp_seq=16 ttl=64 time=102.342 ms 64 bytes from 192.168.1.3: icmp_seq=17 ttl=64 time=25.249 ms Even if this is double what the iPhone-Host or Host-iPhone time would be, 15ms+ is too long for the app I'm considering. Is there any faster way around this (e.g., USB cable)? If not, would building the app on Android offer any other options? Traceroute reports more workable times: traceroute to 192.168.1.3 (192.168.1.3), 64 hops max, 52 byte packets 1 192.168.1.3 (192.168.1.3) 4.662 ms 3.182 ms 3.034 ms can anyone decipher this difference between ping and traceroute for me, and what they might mean for an application that needs to talk to (and from) a host?

  Read the article

• Linux USB debug connection to LuminaryMicro evaluation board

  - by mikelong

  Hi, I am trying to connect a Stellaris LM3S8962 evaluation kit to a linux host machine. I am using the CodeSourcery G++ for the development toolchain. When I try to run a helloworld example the connection fails with this message: arm-stellaris-eabi-sprite: error: E104. I/O Error communicating with USB Device. arm-stellaris-eabi-sprite: waiting for GDB connection, to pass error along warning: Remote failure reply: E.fatal.E104. I/O Error communicating with USB Device. arm-stellaris-eabi-sprite: error: E002. Not initialized When I connect the evaluation board with the USB cable it seems the device is made available to the system: Mar 24 14:37:16 n6-ws2 kernel: usb 5-2: USB disconnect, address 5 Mar 24 14:37:18 n6-ws2 kernel: usb 5-2: new full speed USB device using uhci_hcd and address 6 Mar 24 14:37:19 n6-ws2 kernel: usb 5-2: configuration #1 chosen from 1 choice Also, it seems that I can connect in some way via the command line tool (but I do get some strange characters): [mlong@n6-ws2 bin]$ ./arm-stellaris-eabi-sprite -i CodeSourcery ARM Debug Sprite (Sourcery G++ 4.4-104) armusb: [speed=] ARMUSB device armusb:///?? - ?? (??) Does anyone have any suggestions I could try? Thanks a lot, Mike

  Read the article

• Website running JavaScript setInterval starts to fail after ~1day

  - by Martin Clemens Bloch

  I wish I could be more specific here, but unfortunately this might be hard. I basically hope this is some "well"-known timeout or setup issue. We have a website running an (JS/html - ASP.net project) website overview on a screen at a factory. This screen has no keyboard so it should keep refreshing the page forever - years perhaps (though 1 week might be okay). (It is used by factory workers to see incoming transports etc.) This all works perfectly; the site continuously updates itself and gets the new correct data. Then, sometimes, in the morning this "overview" screen has no data and the workers have to manually refresh the site using the simple refresh button or F5 - which fixes everything. I have tried a few things trying to reproduce the error myself including: Cutting the internet connection and MANY other ways of making it timeout (breakpoints, stopping services etc.). Setting the refresh time of setInterval to 100ms and letting the site run 3-5 minutes. (normal timer is 1 minute) setInterval SHOULD run forever according to the internet searching I have done. Checked that "JavaScript frequency" has not been turned down in power saving settings. No matter what; the site resumes correct function WITHOUT a refresh as soon as I plug in the internet cable or whatever again - I can't reproduce the error. The website is dependent on a backend WCF service and project integration, but since the workers are fixing this with a simple refresh I am assuming this has not crashed. EDIT: The browser I tried to reproduce the error in was IE/win7. I will ask about the factory tomorrow, but I am guessing IE/win? also. Is setInterval in fact really infinite or is there something else wrong here? All help much appreciated. 0.5 bitcoin reward for solving answer ;)

  Read the article

• Can't send smtp email from network using C#, asp.net website

  - by Kaysar

  Hi, I have my code here, it works fine from my home, where my user is administrator, and I am connected to internet via a cable network. But, problem is when I try this code from my work place, it does not work. Shows error: "unable to connect to the remote server" From a different machine in the same network: "A socket operation was attempted to an unreachable network 209.xxx.xx.52:25" I checked with our network admin, and he assured me that all the mail ports are open [25,110, and other ports for gmail]. Then, I logged in with administrative privilege, there was a little improvement, it did not show any error, but the actual email was never received. Please note that, the code was tested from development environment, visual studio 2005 and 2008. Any suggestion will be much appreciated. Thanks in advance try { MailMessage mail_message = new MailMessage("[email protected]", txtToEmail.Text, txtSubject.Text, txtBody.Text); SmtpClient mail_client = new SmtpClient("SMTP.y7mail.com"); NetworkCredential Authentic = new NetworkCredential("[email protected]", "xxxxx"); mail_client.UseDefaultCredentials = true; mail_client.Credentials = Authentic; mail_message.IsBodyHtml = true; mail_message.Priority = MailPriority.High; try { mail_client.Send(mail_message); lblStatus.Text = "Mail Sent Successfully"; } catch (Exception ex) { System.Diagnostics.Debug.WriteLine(ex.Message); lblStatus.Text = "Mail Sending Failed\r\n" + ex.Message; } } catch (Exception ex) { lblStatus.Text = "Mail Sending Failed\r\n" + ex.Message; }

  Read the article

• How to create platform independent 3D video on 3D TV via HDMI 1.4?

  - by artif

  I am writing a real-time, interactive 3D visualization program and at each point in the program, I can compute 2 images (bitmaps) that are meant to look 3D together by means of stereoscopy. How do I get my program to display the image pairs such that they look 3D on a 3D TV? Is there a platform independent way of accomplishing it? (By platform I mean independent of GPU brand, operating system, 3D TV vendor, etc.) If not, which is preferable-- to lock in by GPU, OS, or 3D TV? I suppose I need to be using an HDMI 1.4 cable with the 3D TV? HDMI 1.4 can encode stereoscopy via side-by-side method. But how do I send such an encoded signal to the monitor? What kind of libraries do I use for this sort of thing? Windows DirectShow? If DirectShow is correct, is there a cross platform equivalent available? If anyone asks, yes I have seen this question: http://stackoverflow.com/questions/2811350/generating-3d-tv-stereoscopic-output-programmatically. However, correct me if I am wrong, it does not appear to be what I'm looking for. I do not have an OpenGL or Direct3D program that generates polygons, for which a Nvidia card can do ad-hoc impromptu stereoscopy simply by rendering the scene from 2 slightly offset points of view and then displaying those 2 images on the monitor-- my program already has those image pairs and needs to display them (and they are not the result of rendering polygons). Btw, I have never done any major multimedia programming before and know very little about HDMI, Direct Show, 3D TVs, etc so pardon me if any parts of this question did not make any sense at all.

  Read the article

• adb doesn't get phone's device name/number

  - by Dona Hertel

  Okay, I have a strange problem I haven't seen listed anywhere. I'm developing an android app and I would like to run it on my Huawei Ascend. I have set up a file in /etc/udev/90-android.rules with the line: SUBSYSTEM=="usb", SYSFS{idVendor}=="12d1", MODE="0666" where '12d1' is the correct vendor ID for this phone (I verified this with 'lsusb' command). When I plug in the phone (it does have debugging on) and restart the adb server I get a connection but the name field does not get set. The output to 'adb devices' is: List of devices attached \n ???????????? device Plugging and unplugging the cable doesn't resolve this. Neither does restarting the adb server. Nor does a total reboot of both my computer or the phone. This is fine as I can get logs and a shell. The problem is that in the eclipse plugin, the device's name is list as "????????????" and so when it tries connect, it quits with an error message of 'device not found' even though the device is listed and 'online'. Is there something else I need to do? Do I need to set the name of the device somehow? cocofan P.S.: The app has 'debuggable' set to true in the manifest file.

  Read the article

• Proper way to scan a range of IP addresses

  - by Josh G

  Given a range of IP addresses entered by a user (through various means), I want to identify which of these machines have software running that I can talk to. Here's the basic process: Ping these addresses to find available machines Connect to a known socket on the available machines Send a message to the successfully established sockets Compare the response to the expected response Steps 2-4 are straight forward for me. What is the best way to implement the first step in .NET? I'm looking at the System.Net.NetworkInformation.Ping class. Should I ping multiple addresses simultaneously to speed up the process? If I ping one address at a time with a long timeout it could take forever. But with a small timeout, I may miss some machines that are available. Sometimes pings appear to be failing even when I know that the address points to an active machine. Do I need to ping twice in the event of the request getting discarded? To top it all off, when I scan large collections of addresses with the network cable unplugged, Ping throws a NullReferenceException in FreeUnmanagedResources(). !? Any pointers on the best approach to scanning a range of IPs like this?

  Read the article

• Determine asymmetric latencies in a network

  - by BeeOnRope

  Imagine you have many clustered servers, across many hosts, in a heterogeneous network environment, such that the connections between servers may have wildly varying latencies and bandwidth. You want to build a map of the connections between servers my transferring data between them. Of course, this map may become stale over time as the network topology changes - but lets ignore those complexities for now and assume the network is relatively static. Given the latencies between nodes in this host graph, calculating the bandwidth is a relative simply timing exercise. I'm having more difficulty with the latencies - however. To get round-trip time, it is a simple matter of timing a return-trip ping from the local host to a remote host - both timing events (start, stop) occur on the local host. What if I want one-way times under the assumption that the latency is not equal in both directions? Assuming that the clocks on the various hosts are not precisely synchronized (at least that their error is of the the same magnitude as the latencies involved) - how can I calculate the one-way latency? In a related question - is this asymmetric latency (where a link is quicker in direction than the other) common in practice? For what reasons/hardware configurations? Certainly I'm aware of asymmetric bandwidth scenarios, especially on last-mile consumer links such as DSL and Cable, but I'm not so sure about latency. Added: After considering the comment below, the second portion of the question is probably better off on serverfault.

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83  | Next Page >