Search Results

Search found 8850 results on 354 pages for 'windowx xp'.

Page 83/354 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Accessing WindowsXP shared printer from macbook?

  - by mobibob

  My new printer is setup on WindowsXP, it works and it is configured as a shared printer. I then setup a printer from Mac OSX 10.6.3 using the approved driver from the setup CD. I browsed for the printer via the network. When I send a test page, it queues, but never prints. Its as if the driver thinks the printer is local to the mac and just never finishes printing. THe configuration shows as: smb://dragoneye/CanonMP2 Where dragoneye is the name of the Windows XP server and the CanonMP2 is the little multi-purpose printer. My other Windows' CPU can setup and print. Is this a known problem or am I missing a setting??

  Read the article

• Need Help Debugging BSOD

  - by nmuntz

  For the last few days I've been getting a BSOD at least once a day. Apparently the crash has been caused by ntkrpamp.exe and searching on google has revealed that the issue seems to be related to bad RAM. I have run memtest and my RAM modules have no errors on them. I'm pretty sure the issue is related to drivers, but I can't figure out which one. I'm not an expert in interpreting the output of windbg so any pointers would be greatly appreciated. Here is my analysis with WinDbg. It was too long to paste it here. One strange thing i noticed is that my Windows XP is in Spanish (SP3) and ntkrpamp.exe copyright info seems to be in portuguese. Not sure if that could be an issue, perhaps i have the wrong ntkrpamp.exe... Thanks a lot in advance

  Read the article

• Exited Emacs without saving, did it save the file somewhere?

  - by rumtscho

  Hi, I am using Emacs on Windows XP. Had it open to take some notes in a meeting, but forgot to create a file first (the text got created in the usual "scratch" buffer). Then I closed a lot of applications after the meeting, forgetting to save the notes in Emacs :( I know that when I am modifying an existing file, it creates a backup of the old file in the same directory. But I don't know if the information from the scratch buffer is available somewhere after an exit without saving. Do you know if I can restore my information? I haven't shut down/suspended/hybernated the system since, so all temp files should be still accessible.

  Read the article

• Seeking a solution to automatically copy files from the cd-rom disk to the USB drive once it's connected.

  - by Ray Nathan

  I plan to distribute a free CD that automatically copies files to a connected usb device. This process will be done on the computers of the users that obtain the cd. The CD will contain an autorun.ini file that will instruct the computer to copy a set of files located on the cd..to a specific directory on the connected usb device. The usb drive letter is not the same on all the systems, therefore...Windows XP should automatically know the drive letter of the usb device before the copy operation begins. What would be the best way of creating a short batch file or script that I can place on the CD to execute this process? Also, please note that it is NOT feasible or recommended to include a batch file on the USB devices to sync this operation due to the explanation at the beginning of this paragraph. :) Thank You All

  Read the article

• Why would Remote Assistance work but not Remote Desktop?

  - by Craig Johnston

  I have managed to get Remote Assistance working between two XP-Pro machines, but as soon as I try Remote Desktop I can't even get to the login screen without an error which gives a list of possibilities and concludes with "See your network administrator", which isn't very helpful. I have ramped up the security level on Remote Desktop including turning on encryption etc. Could this be the problem? I will only get a few hours on the machine at a time so I need to be well-prepared before I attack this problem again. Any ideas?

  Read the article

• Where can I download Microsoft VC80.CRT version 8.0.50608.0 ?

  - by Leonel

  Hi, I've just installed Microsoft Office Home and Student 2007 in Windows XP SP3 When trying to run MS word or any other office app (Excel, PowerPoint), I get the following message: this application has failed to start because the application configuration is incorrect This also happens with other applications, for instance, Acrobat Reader. A bit of Googling around this error message suggests that this might be due to a mismatch of library versions. In fact, most of the articles and forum messages I found mention a programmer writing an application in Visual C++ and sending it to someone else, who then runs into that error. This is hardly my case ! I looked into Office's files and the manifest file for Excel suggests that Office is trying to use Microsoft VC80.CRT version 8.0.50608.0. However, in my Windows System folder, I can only find the assemblies for 8.0.50727.762 My next step will be trying to find version 8.0.50608.0. How can I find and download it ?

  Read the article

• how to force 1440x900 resolution on acer al1702w lcd monitor

  - by ashishsony

  i have acer al1702w lcd monitor in my office.. somehow i restarted the system using the reset button as the os stoped responding.. since then the 1440x900 resolution option in the display settings is not appearing.. the intel graphocs is 82945G... and as always the h/w guys at the office are of no help.. they start blurting out their theories that this the best resolution... even though i show them that the max resolution for the monitor is indeed 1440x900.. and its not that the 82945g cant handle it... as it was working before.. i installed the latest drivers for this graphics but still im not finding that option... how to force 1440x900 resolution... oh tes the os ix xp pro sp2 Thanks..

  Read the article

• IE8/IE7/IE6/IE5 on WinXP Use The Wrong Certificate

  - by Marco Calì

  For some reason IE8/IE7/IE6/IE5 on Windows XP, instead to use the certificate that is listed on the nginx website config, is using another certificate that is used from other websites. Checking the nging config file for the website everything is fine. A confirm of this is that all the other browsers (Chrome/Firefox/Safari/IE9) are using the correct certificate. This is the nginx configuration for the app: server { listen 80; listen 443 ssl; server_name mydomain.com; ssl_certificate /root/certs/mydomain.com/mydomain.bundle.crt; ssl_certificate_key /root/certs/mydomain.com/mydoamin.key; access_log /opt/webapps/cs_at/logs/access.log; location / { add_header P3P 'CP="CAO PSA OUR"'; proxy_pass http://127.0.0.1:20004; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header X-Real-IP $remote_addr; } }

  Read the article

• How can I throttle the bandwidth consumed by Windows Automatic Updates?

  - by eleven81

  We have many Windows XP computers sharing one connection to the internet. These machines are set to download all available automatic updates and then prompt the user to install them. Whenever Patch Tuesday rolls around, our internet usage pegs out, and remains that way for most of the day, and sometimes into the following Wednesday. This hurts! I still want the machines to start to download the updates as soon as they are available, but if it takes until Thursday or Friday before the last updates are downloaded, that's still better than the latency and dropped connections we are seeing now as a result of the internet connection bottleneck. What can I do to throttle back how rapidly each machine downloads the updates, while still having them all start the download process as soon as the updates are available? I have no desire to run a WSUS server. Also, the internet connection is more than enough, whenever there are no updates to download.

  Read the article

• Error "iertutil.dll not found" after installing IE8

  - by christianlinnell

  I rolled out IE8 to a group of test users in our organisation overnight, and after logging in in the morning, several of the users reported the error Userinit.exe error and explorer.exe error - iertutil.dll not found After clicking OK, the PC just hangs with the background visible. A few people are reporting this error in various forums, but "do a system restore" is not a good solution. We can easily roll back to IE6 by replacing the DLL, or by uninstalling IE8. We just need a flawless rollout! We're on Windows XP Service Pack 3. Edit: We deploy via SMS. Initially we had 2 machines with the error, but somebody made a mistake with the test package and it rolled out five nights in a row. By the end of the five nights, 4 more machines had developed the same issue.

  Read the article

• WinXP on VPC - Unable to change the way users log on or off

  - by kamleshrao

  On my Win7 computer, I have setup a new Win-XP VPC. In the VPC window, when I click Ctrl+Alt+Del, it shows me Windows Task Manager. As per MS KB [ http://support.microsoft.com/kb/281980 ], we can change this behavior to show the regular Windows Security window. But while making this change, I am getting the following error: User Accounts Fast User Switching cannot be turned off from a remote connection to this computer. Log on to the computer locally to turn off Fast User Switching. OK Is there any way I can fix this setting?

  Read the article

• How Can I prevent a specific application from being run on a specific machine using Group Policy?

  - by Mike

  I know this is possible to do and I am working on it with limited success. I believe the Group Policy I want is "Do Not Run Specified Windows Applications" - I can enable this and add the .exe I want to the list of programs not to be run. I have tried this on my local machine by running gpedit.msc going to User Config Admin Templates System and then choosing that policy and editing and enabling it. Doing it this way verifies that it works as I could then not run the specified .exe (XenAppWeb.exe) So this is great. I have created a GPO to do the same thing in GP Management on my domain controller where we centralize this, enforced it, applied it to an OU, and put one of our machines into this OU to test it. I have let it sit there for 3 days, run gpupdate /force, and when I try to run XenAppWeb.exe on this machine, it still lets me run it fine. What can I look at to troubleshoot this? I should note that I am trying to enact this policy on Windows XP machines (Virtual Machines) Thanks, Mike

  Read the article

• Laptop is Switching DNS Servers

  - by Steffan Harris

  Ok sometime ago I changed my ip address to a static one because I was bored and I wanted to learn more about static ips. I am running windows xp. My laptop works find on the network that i set up a static ip address, but when i go to another network, the incorrect dns servers are being used. When I enter the option to get a dns server automatically, the internet connection works but only for a short time. After that the dns servers resets to the one i entered manually on a previous network. I did this by going to Network Connection-Right Click Local Area Connection and go to properties-Select TCP/IP - then click the Properties button. At this point i am given the option to Obtain an ip address or obtain and address automatically. My question is how do I resolve this problem of the dns server reseting to the previous one.

  Read the article

• How do I record sound from my CD/DVD player without other system sounds in the mix?

  - by Software Monkey

  Using GoldWave I can record via the "Stereo Mix" channel, but I get no sound on the "CD" channel. Of course, using the stereo mix also mixes in all system sounds, including beeps, etc. I have the analog out on the DVD player connected to the CD-IN connector on the MoBo. I can hear CDs and DVDs playing just fine through my speakers - is this because the CD is also IDE data connection in to deliver the sound to the sound card, then? I specifically want to record a DVD; I can easily rip a CD using GoldWave's built-in ripper. Is there anything I have forgotten or have to enable? Or is it likely I have a damaged cable? My system is an MSI mobo and is running Windows XP SP3.

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• Why does the command forfiles list files that are not a day old despite the command being otherwise?

  - by PeanutsMonkey

  The command I am executing is forfiles -p"C:\testdata" -m*.* -d-1 -c"cmd /c echo @PATH\@FILE" I have specified that I wish to only list files that are a day old however when I execute the statement, it returns me a list of files that were created today. Why is that? Am I doing something wrong? Would it be better to specify a time period as opposed to a date e.g. 24 hours? The version of forfiles I have reads as follows FORFILES v 1.1 - [email protected] - 4/98. The batch file is being run on Windows XP.

  Read the article

• configure vpn so that it is not the preferred route

  - by pstanton

  Hi all, I recently re-installed XP on my PC. I had a vpn set up on the old system and remember being advised to change one setting so that it wasn't the preferred route for all network traffic. This was ideal as only connections to the target network would be made through the vpn and all normal traffic would go through the regular path unmolested. i remember thinking "why isn't this the default setting!?". now i've formatted my drive and lost the config for that vpn (besides host, username, passwd). does anyone know of the setting i'm referring to? thanks, paul.

  Read the article

• Workstation 7 build 203739 - Capture Movie Mouse Pointer Not Visible

  - by BMIVM

  Hi, I have noticed that whenever I create a Capture Movie, the movie is fine but the mouse pointer is not visible at all. The clicks are on buttons file menus are executed but is hard for a viewer of the capturre movie session to follow the recording smoothly. This was not a problem in previous versions of WorkStation. Is this a bug or is there a setting I can set to see the mouse pointer? Note: VM Tools are installed, Host is Vista Ultimate Edtion SP1, x64 and the guest is a Win XP SP2. Thanks in advance for your help.

  Read the article

• Why not install Msvcr71.dll into system32?

  - by hillu

  While looking for an authoritative source for the missing Msvcr71.dll that is needed by a few old applications, I stumbled across the MSDN article Redistribution of the shared C runtime component in Visual C++. The advice given to developers is to drop the DLL into the application's directory instead of system32 since DLLs in this directory are considered before the system paths. What can/will go wrong if I (as an administrator, not a developer) decide to take the lazy path and install Msvcr71.dll (and Msvcp71.dll while I'm at it) into the system32 directory (of 32 bit Windows XP or Windows 7 systems) instead of putting a copy in each application's directory? Is there another good solution to provide the applications with the needed DLLs that doesn't involve copying stuff to the application directories? added after first answers: I understand that incompatible API changes may have been made to the mentioned DLLs, but pretty much every mention of incompatibilities I have found using Google had to do with games or video codecs. Right now, I expect that the risk of breakage is pretty small. Am I missing something?

  Read the article

• What causes random clicking/navigation sound while PC is idle?

  - by user14339

  On my Dell D630 laptop running Windows XP Pro SP3, I randomly hear the "Windows Navigation Start.wav" played. This happens even if the only application active on the PC at the time is Microsoft Outlook and no one is touching the keyboard or touchpad. The start navigation sound IS enabled for Internet Explorer (I have IE 7 installed), but it is not running (no window open, anyway). The clicks are rapid, as if being executed automatically by a script or process, and they always come in threes: "click-click, click". I don't see any changes on the display and I don't know how to figure out what's running that could cause this. I have tried to leave Windows Task Manager open in the hope that I'll see a process name jump to the top of the list briefly, but it doesn't happen that often and I guess I'm not quick enough. The PC is slower than I think it should be, but System Idle Process is at 96 - 99 during the event, and for most of the time when I'm not actually using the machine. Any ideas?

  Read the article

• Dell D630 - Touchpad does not move the mouse cursor

  - by Dean McKenzie

  Windows XP - Dell D630 - Synaptics Touch Pad driver installed. The system tray icon that shows the movement of your finger on the touchpad registeres movement. The scroll feature of the touchpad works on any window with a scroll bar. The double click works even. But it never actually moves the cursor on the screen. An external mouse works with out problems, and I've replaced the palm-rest/touchpad and it continues to happen. The touch stick in the middle of the keyboard works without problems. Does anyone have any ideas?

  Read the article

• Disable/configure Back and Forward through mouse wheel in Internet Explorer

  - by Subtwo

  I have a problem with Internet Explorer (version 7 on Windows XP). Sometimes (not always) when you use the mouse wheel to scroll a page up/down it instead chooses to go back or forth in the web browsing history. This behavior is the same as when you hold the shift-key simultaneously using the wheel. My guess is that Internet Explorer somehow gets misled by something and thinks that I'm actually pressing shift. This is in turn maybe an artifact of the fact that this particular session is a remote-desktop session originating from Linux (Ubuntu). Needless to say the problem can be quite irritating and the alternative of completely turning off the wheel functionality doesn't seem like an option as other applications would suffer greatly from this. Anyway back to my question(s): Is it possible to map the shift+wheel to a simple wheel event for Internet Explorer? Is it possible to disable the shift+wheel event for Internet Explorer? Any suggestions are greatly appreciated.

  Read the article

• Error when trying to access Shared files from iMac via smb

  - by SatheeshJM

  I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

  Read the article

• Maximum burn speed keeps decreasing from Nero?

  - by Bob King

  I have a 16x DL DVD burner in my work machine (XP SP3). I'm using 8x TDK DVD+R media. The first dozen or so disks burned fine using Nero, but after that I started to coaster every disk. I asked Nero to calculate the maximum speed, and it calculated it at 4x. This worked for a few disks, then the same issues. I'm currently burning at 1.2x. I've since tried other brands and full 16x compatible disks, I can't get my burn speed to be recognized as any faster than what it's currently at. I've tried uninstalling Nero. I've tried burning directly in Windows, and also tested an MP3 CD in iTunes, and no luck. Any suggestions, short of reinstalling Windows, would be great!

  Read the article

• Explorer forgetting how to cut and paste files

  - by raimesh

  My Windows XP (SP3) machine (at work) occasionally "forgets" how to cut-and-paste files in Explorer - if I cut or copy a file then go to paste it elsewhere, the "paste" and "paste shortcut" menu items are greyed out. The keyboard shortcuts (Ctrl+X/Ctrl+C,Ctrl+V) don't work either, and neither does Drag-and-Drop - clicking and dragging a file/folder doesn't change the pointer and letting go doesn't drop the item anywhere. Restarting the explorer.exe process usually fixes the problem, but sometimes I need to do a full reboot. Note: this may be related to the following existing question, although that's Vista and it sounds like the asker has more permanent problems than I do: http://superuser.com/questions/27045/copy-paste-in-vista-explorer-broken-not-ms-vpc So, any idea what might be causing the problem and how to avoid it?

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >