Search Results

Search found 6028 results on 242 pages for 'total commander'.

Page 85/242 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • Way in over my head! (Dealing with better programmers)

    - by darkman
    I've just been hired to be part of a group that is developing in C++. Before, I've been coding on and off at my job for the past 11 years (some C, some Fortran, some C++). The coding I've done was mostly maintaining and adding new features to one of our systems. The code, being 10 years old, did not contain all the modern C++ stuff. Lo and behold, my new job is filled with programmers with 5-10 years experience of pure coding and they all use the most modern aspects of C++ (C++11, template, lambda, etc, etc). They are expecting someone with that same experience... Well, I've been working for 15 years total but when I looked at their code, I couldn't understand half of it! :-| Anyone been in that situation? What would you recommend?

    Read the article

  • Cannot launch an application, 'No such file or directory' but it exists

    - by pst007x
    The folder exists, the application has been made executable. But when i run it I get the following message: pst007x@pst007x-Aspire-5741:~$ /home/pst007x/Applications/ClipGrab/clipgrab bash: /home/pst007x/Applications/ClipGrab/clipgrab: No such file or directory pst007x@pst007x-Aspire-5741:~$ Thanks NOTE: AS SUGGESTED BELOW pst007x@pst007x-Aspire-5741:~$ file /home/pst007x/Applications/ClipGrab/clipgrab /bin/bash /home/pst007x/Applications/ClipGrab/clipgrab: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, BuildID[sha1]=0x22c8628796d72d721cf46293fe1d83b965de6df0, stripped /bin/bash: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, BuildID[sha1]=0x7ea55c6b94d32a06887081649ec990fd70700455, stripped pst007x@pst007x-Aspire-5741:~$ NOTE: AS SUGGESTED BELOW pst007x@pst007x-Aspire-5741:~/Applications/ClipGrab$ ls -l total 588 -rwxrwxrwx 1 pst007x pst007x 388096 Mar 26 14:50 clipgrab -rwxrwxr-x 1 pst007x pst007x 194397 Feb 11 04:07 clipgrab-3.1.3.0.bz2 -rwxrwxr-x 1 pst007x pst007x 15981 Feb 13 00:46 Clipgrab icon.jpg pst007x@pst007x-Aspire-5741:~/Applications/ClipGrab$ NOTE: AS SUGGESTED BELOW pst007x@pst007x-Aspire-5741:~$ cd /home/pst007x/Applications/ClipGrab/ pst007x@pst007x-Aspire-5741:~/Applications/ClipGrab$ ./clipgrab bash: ./clipgrab: No such file or directory pst007x@pst007x-Aspire-5741:

    Read the article

  • Runtime analysis

    - by Joe Smith
    can someone please help me with the analysis of the following function (for inputs of size n). The part that confuses me the most is the inner for loop. def prefix_sums(L): # Total cost = ? pSum = [] #cost = 1 for a in range(len(L)+1): # range + body of function = (n+1) + (n+1)*(body) ? s = 0 #cost = 1 for b in range(a): # cost = ? s = s + L[b] #cost = operation + accessing list = 2 pSum.append(s) #cost = 1 return pSum #cost = 1 What I need to do is figure out the cost of each statement.

    Read the article

  • How does btrfs RAID work in degraded mode?

    - by turbo
    My idea was that (using loopback devices) it works like this Create the raid array sudo mkfs.btrfs -m raid1 -d raid1 /dev/loop1 /dev/loop2 You mount them sudo mount /dev/loop1 /mnt and mark them touch goodcondition You unmount and simulate disk failure (remove disk or delete loopback device loop2 in my case) You mount degraded -o degraded and mark again touch degraded You add the bad disk again sudo btrfs dev add /dev/loop2 You rebalance sudo btrfs fi ba /mnt And Raid 1 should work again. But that's not the case. sudo btrfs fi show: Total devices 3 FS bytes used 28.00KB devid 3 size 4.00GB used 264.00MB path /dev/loop1 devid 2 size 4.00GB used 272.00MB path /dev/loop2 *** Some devices missing The file degraded lives on loop1 but not on loop2 when loop2 is mounted in degraded mode. Why is that?

    Read the article

  • Analysing Group & Individual Member Performance -RUP

    - by user23871
    I am writing a report which requires the analysis of performance of each individual team member. This is for a software development project developed using the Unified Process (UP). I was just wondering if there are any existing group & individual appraisal metrics used so I don't have to reinvent the wheel... EDIT This is by no means correct but something like: Individual Contribution (IC) = time spent (individual) / time spent (total) = Performance = ? (should use individual contribution (IC) combined with something to gain a measure of overall performance).... Maybe I am talking complete hash and I know generally its really difficult to analyse performance with numbers but any mathematicians out there that can lend a hand or know a somewhat more accurate method of analysing performance than arbitrary marking (e.g. 8 out 10)

    Read the article

  • Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

    - by Kellsey Ruppel
    Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the  very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts.  With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button.  Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000  Challenges – Replace disparate medical service portals to meet future demands and eliminate an  unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems  Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution –  Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty  Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals  Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made  available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements  Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project.  “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said.  Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

    Read the article

  • I'm not sure if this is a valid Ubuntu bug to file

    - by Ian Hincks
    I was in the process of filing an bug on Launchpad, but I had second thoughts because there were so many threatening warnings of the effect, "Don't file a bug report unless you're sure it's a bug, and you should really provide a package name". The problem I have, and I've had it for years, is the following: When I'm installing Ubuntu, it asks me to type in my location before it asks me what my keyboard layout is. Using a QWERTY keyboard but with the buttons popped of and in the Dvorak order, this is annoying, because it is assumes I am using a QWERTY keyboard, and so I have to guess at where all the QWERTY keys are to spell my city's name. It seems like it would make more sense to switch the order of these two questions. (I'll be the first person to admit that this is a very minor problem that has probably wasted less than 2 minutes of my life in total -- but it's the principle of the thing :p) So my question is: is this order there for a particular reason, and if it isn't, is it appropriate to file it as a bug, and under which package name?

    Read the article

  • OpenGL ES 2.0 example for JOGL

    - by fjdutoit
    I've scoured the internet for the last few hours looking for an example of how to run even the most basic OpenGL ES 2 example using JOGL but "by Jupiter!" it has been a total fail. I tried converting the android example from the OpenGL ES 2.0 Programming Guide examples (and at the same time looking at the WebGL example -- which worked fine) yet without any success. Are there any examples out there? If anyone else wants some extra help regarding this question see this thread on the official Jogamp forum.

    Read the article

  • How to install drivers for NVIDIA GeForce FX 5200 on Precise

    - by Aaron Simmons
    Ok, I'm a total Linux noob. I was able to install 12.4 without issue, except that it says in the system settings that the graphics card/driver is "unknown". I have NVIDIA GeForce FX 5200, and have not been able to get it installed. I've found the driver at NVIDIA but couldn't figure out how to actually install it. I found instructions that used apt-get to automatically find the current driver and install it, and that came close. At least then it showed up in the 3rd party drivers list. It said it was installed but not being used? And I was unable to find out why that might be, or how to get the system to use it Two questions: 1. CAN/SHOULD my graphics card work with 12.4? 2. If so, HOW? I'm running a 100% fresh install, so what's the step-by-step from there?

    Read the article

  • Why do webpages take longer to loo in ubuntu 12.04 than Windows 7

    - by Emil Abraham
    For example, when I click on a Facebook picture, the picture remains pixelated for about 30 seconds, then starts to clear up. Or when I watch YouTube videos, I can't watch them on HD without running into buffer issues. Windows 7 is just much snappier. It might be an issue with the graphics card. Dualbooting Windows 7 64bit & Ubuntu 12.04 64 bit Specs: CPU: Intel® Core™ i7-2630QM CPU @ 2.00GHz × 8 RAM: 8GB DDR3 HDD: 50 GB to Ubuntu & Remaining 1.5 TB to Windows The interesting part: Graphics Card: On System Settings in Ubuntu: Intel® Sandybridge Mobile Graphics Card: What it should be: Radeon™ HD 7690M XT switchable graphics with 1024MB GDDR5 and up to 5093MB total graphics memory

    Read the article

  • 64 bit Ubuntu sees half my RAM

    - by koehn
    This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

    Read the article

  • Expanding on requestaudit - Tracing who is doing what...and for how long

    - by Kyle Hatlestad
    One of the most helpful tracing sections in WebCenter Content (and one that is on by default) is the requestaudit tracing.  This tracing section summarizes the top service requests happening in the server along with how they are performing.  By default, it has 2 different rotations.  One happens every 2 minutes (listing up to 5 services) and another happens every 60 minutes (listing up to 20 services).  These traces provide the total time for all the requests against that service along with the number of requests and its average request time.  This information can provide a good start in possibly troubleshooting performance issues or tracking a particular issue.   [Read More] 

    Read the article

  • The practical cost of swapping effects

    - by sebf
    I use XNA for my projects and on those forums I sometimes see references to the fact that swapping an effect for a mesh has a relatively high cost, which surprises me as I thought to swap an effect was simply a case of copying the replacement shader program to the GPU along with appropriate parameters. I wondered if someone could explain exactly what is costly about this process? And put, if possible, 'relatively' into context? For example say I wanted to use a short shader to help with picking, I would: Change the effect on every object, calculting a unique color to identify it and providing it to the shader. Draw all the objects to a render target in memory. Get the color from the target and use it to look up the selected object. What portion of the total time taken to complete that process would be spent swapping the shaders? My instincts would say that rendering the scene again, no matter how simple the shader, would be an order of magnitude slower than any other part of the process so why all the concern over effects?

    Read the article

  • Encrypted Home directory not auto mounting

    - by Valorin
    I somehow managed to break auto-mounting for my encrypted home directory. Every time I login via SSH, I see this: valorin@joshua:~$ ls -la total 44 dr-x------ 3 valorin valorin 4096 2012-03-17 17:10 . drwxr-xr-x 7 root root 4096 2012-03-17 11:45 .. lrwxrwxrwx 1 valorin valorin 56 2012-03-08 20:37 Access-Your-Private-Data.desktop -> /usr/share/ecryptfs-utils/ecryptfs-mount-private.desktop -rw------- 1 valorin valorin 917 2012-03-17 19:24 .bash_history drwx------ 3 valorin valorin 4096 2012-03-16 17:58 .cache lrwxrwxrwx 1 valorin valorin 33 2012-03-08 20:37 .ecryptfs -> /home/.ecryptfs/valorin/.ecryptfs -rw-r--r-- 1 root root 21954 2012-03-08 20:35 .face lrwxrwxrwx 1 valorin valorin 32 2012-03-08 20:37 .Private -> /home/.ecryptfs/valorin/.Private lrwxrwxrwx 1 valorin valorin 52 2012-03-08 20:37 README.txt -> /usr/share/ecryptfs-utils/ecryptfs-mount-private.txt -rw------- 1 root root 703 2012-03-17 17:10 .viminfo Any ideas what I've done, and how I can fix it?

    Read the article

  • Unable to boot: Missing Operating system

    - by Vivek S Panicker
    i had installed Ubuntu 11.10 along with the another Ubuntu 11.10 which already installed in my netbook. Later I formatted the partition I newly installed. Next time when I boot it went to Grub Rescue menu. I boot my system again with Ubuntu USB stick, Then I installed Boot repair package in USB and restored MBR and GRUB menu in hard disk. Now when I am restarting, I am getting a message Missing operating system, press any key to continue. Can somebody help me on this? Below is the output for sudo fdisk -l omitting empty partition (7) Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00058a60 Device Boot Start End Blocks Id System /dev/sda1 * 2048 204072287 102035120 83 Linux /dev/sda2 204072958 312580095 54253569 5 Extended /dev/sda5 310507520 312580095 1036288 82 Linux swap / Solaris /dev/sda6 308432896 310503423 1035264 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 4006 MB, 4006608896 bytes 124 heads, 62 sectors/track, 1017 cylinders, total 7825408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004d3df Device Boot Start End Blocks Id System /dev/sdb1 * 62 7818695 3909317 b W95 FAT32 Below is the output for sudo blkid /dev/loop0: TYPE="squashfs" /dev/loop1: LABEL="casper-rw" UUID="533defb1-f073-254a-b46f-7ca0ac1f4e0c" TYPE="ext2" /dev/sda1: LABEL="Ubuntu" UUID="6a141040-3ba8-457a-9de5-ad06e6057084" TYPE="ext4" /dev/sda5: UUID="3a7f62d6-9c65-4d12-a3b6-5d62b9710f7d" TYPE="swap" /dev/sda6: UUID="274da115-cec2-4418-a1af-88fe921e3670" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="EC22-6BE4" TYPE="vfat" File /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6a141040-3ba8-457a-9de5-ad06e6057084 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6a141040-3ba8-457a-9de5-ad06e6057084 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • Virtual screen size with libgdx and GLES 2

    - by David Saltares Márquez
    I've been trying to use a virtual screen size for my libgdx desktop-android game. I'd like to always use a 16:9 aspect ratio but with a virtual screen size so everything would adapt automatically depending on the device size. This post illustrates the process pretty well but my game crashes when camera.apply(Gdx.Gl10) is called. This is because I'm using GLES 2.0 (for not having to use multiple of 2 texture sizes). As stated in the OrthographicCamera doc, the apply method only works with GLES 1 and GLES 1.1. Is there another way of applying my GL transformation to the camera so I can use a virtual screen resolution? Having to resize everything manually it's a total pain. Thanks a lot.

    Read the article

  • Updated Payroll Tax Liability Formula for Dynamics GP

    - by Ryan McBee
    Prior to the latest Payroll Update for Great Plains, you could do an audit check of the Payroll Tax Liability GP calculation by simply taking Federal Tax Witholding + Fica Medicare Withholding times 2 + Fica SSN times 2.  As you probably know by now, the Employers portion of FICA is 6.2% and the Employers portion has been reduced to 4.2%. However, I have had a number of clients contact me and say this formula is no longer applicable and have asked for a revised formula.  The new formula is described below and ties out to a sample Payroll Run using Fabrikam.   As you can see from above, the prior formula is not applicable and the new audit check is as follows; Federal Tax WH  $                  6,655.17   Employee Medicare  $                     408.47   Employees SS  $                  1,746.54   Employer Medicare  $                     408.47   Employer SS  $                  1,746.55 (FICA Owned – FICA Medicare WH)       Total Tax Liability  $               10,965.20   I have talked with Microsoft and at this time, they have no intent on modifying the report to split out the employer (6.2%) and employee (4.2%) FICA portions.

    Read the article

  • bash script move file to folders based in name

    - by user289111
    I hope you can help me... I made a perl and bash script to make a backup of my firewalls and tranfers via tftp #!/bin/sh perl /deploy/scripts/backups/10.160.23.1.pl > /dev/null 2>&1 perl /deploy/scripts/backups/10.160.23.2.pl > /dev/null 2>&1 so this tranfers the file to my tftp directory /tftpboot/ ls -l /tftpboot/ total 532 -rw-rw-rw- 1 tftp tftp 209977 jun 6 14:01 10.160.23.1_20140606.cfg -rw-rw-rw- 1 tftp tftp 329548 jun 6 14:02 10.160.23.2_20140606.cfg my questions is how to improve my script to moving this files dynamically to another folder based on the name (in this case on the ip address) for example: 10.160.23.1_20140606.cfg move to /deploy/backups/10.160.23.1/ is that the answer to this surely was on Google, but wanted to know if there was a particular solution to this request and also learn how to do :) Thanks!

    Read the article

  • New host, high load?

    - by dotancohen
    A few minutes ago I signed up at a new webhost. I have yet to move my sites over. Upon initial SSH connection, I checked the load and memory usage, they do seem rather higher than I would like: # uptime 12:06:51 up 71 days, 23:23, 1 user, load average: 9.02, 9.49, 9.45 # free total used free shared buffers cached Mem: 33014800 31927192 1087608 0 2384812 17729816 -/+ buffers/cache: 11812564 21202236 Swap: 16787916 8584 16779332 Is that a bit to packed? I'm only paying about $5 USD per month, so I don't expect <0.1 loads, but ~10 is worrisome. Is it not? Also, there is no /etc/issue file so I tried other methods to guess the OS: # uname -a Linux box358.bluehost.com 2.6.32-20120131.55.1.bh6.x86_64 #1 SMP Tue Jan 31 15:43:27 EST 2012 x86_64 x86_64 x86_64 GNU/Linux # which yum /usr/bin/yum # which apt-get # That looks like CentOS / RHEL 6.2 possibly?

    Read the article

  • Building lirc package from source with patches

    - by joystick
    I'd like to build latest lirc package for 12.04 with two patches from http://bit.ly/17779VW to make USB Infrared toy v2 work: Running sudo apt-build source lirc gave me ? build ll total 960 drwxr-xr-x 10 root root 4096 Nov 5 07:07 lirc-0.9.0 -rw-r--r-- 1 root root 113909 May 5 2011 lirc_0.9.0-0ubuntu1.debian.tar.gz -rw-r--r-- 1 root root 1553 May 5 2011 lirc_0.9.0-0ubuntu1.dsc -rw-r--r-- 1 root root 857286 May 5 2011 lirc_0.9.0.orig.tar.bz2 in /var/cache/apt-build/build. Running sudo apt-build build-source lirc then gave me Some error occured building package which is not really informative. I have successfully built patched lirc from source but now I would like to get a deb package. Where can I look for this 'some errors' in detail? Thank you, Alexei

    Read the article

  • Where can I find Cinema4D for game development tutorials ?

    - by George Profenza
    Hi, I started to learn Cinema 4D. I've noticed it's really easy to use for motion graphics, but I want to use it for modeling for games/realtime 3d engines. Before I used 3dsmax and it was easy to estimate how a model would look/behave in a 3d engine. The two main things I did was displaying Polygon triangles and displaying the Polygon Count. I've found the Total Polygons tick in HUD settings in Cinema 4D, but I can't find any display mode that will show triangles. Is there there a way to display triangle faces/not quads in Cinema4D ? If so how ? There is a Triangulate function, but I'd rather not Triangulate/Untriangulate all the time, especially since it's converting back and forth between the two doesn't always produce the same result. I imagine I'm asking for old school techniques, but I plan to use these to make low poly models for web(canvas/webGL) and mobile.

    Read the article

  • Can't see my partitions after grub recovery

    - by dimbo
    I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

    Read the article

  • Find the latest file by modified date

    - by Rich
    If I want to find the latest file (mtime) in a (big) directory containing subdirectories, how would I do it? Lots of posts I've found suggest some variation of ls -lt | head (amusingly, many suggest ls -ltr | tail which is the same but less efficient) which is fine unless you have subdirectories (I do). Then again, you could find . -type f -exec ls -lt \{\} \+ | head which will definitely do the trick for as many files as can be specified by one command, i.e. if you have a big directory, -exec...\+ will issue separate commands; therefore each group will be sorted by ls within itself but not over the total set; the head will therefore pick up the lastest entry of the first batch. Any answers?

    Read the article

  • New Procurement Report for Transportation Sourcing

    - by John Murphy
    Welcome to our fourth annual transportation procurement benchmark report. American Shipper, in partnership with the Council of Supply Chain Management Professionals (CSCMP) and the Retail Industry Leaders Association (RILA), surveyed roughly 275 transportation buyers and sellers on procurement practices, processes, technologies and results. Some key findings: • Manual, spreadsheet-based procurement processes remain the most prevalent among transportation buyers, with 42 percent of the total • Another 25 percent of respondents use a hybrid platform, which presumably means these buyers are using spreadsheets for at least one mode and/or geography • Only 23 percent of buyers are using a completely systems-based approach of some kind • Shippers were in a holding pattern with regards to investment in procurement systems the past year • Roughly three-quarters of survey respondents report that transportation spend has increased in 2012, although the pace has declined slightly from last year’s increases • Nearly every survey respondent purchases multiple modes of transportation • The number of respondents with plans to address technology to support the procurement process has increased in 2012. About one quarter of respondents who do not have a system report they have a budget for this investment in the next two years.

    Read the article

  • Microsoft Money alternative?

    - by torbengb
    I'm looking for something to replace my MS Money 2004 application. I've tried KMyMoney which seems pretty simple (that's good!) but it can't import the OFC files I get from my bank, so I would have to enter everything manually = not good. I've tried GnuCash which does import OFC files but I can't wrap my mind around this double-entry philosophy. It may be good for accounting but not for home use. I've tried to make MS Money run in Wine with some success but it was hard to make it work and I'd have to re-do that on my new machine. This is still a useful alternative for me though... Is there a similar tool that can import OFC files and that doesn't do double-entry accounting? Tax capability is not needed for me, I only do after-tax numbers. Some nice dashboard views (upcoming bills, future cash flow, total net worth) and some graphs would be a definite bonus!

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >