Search Results

Search found 4073 results on 163 pages for 'hosts deny'.

Page 92/163 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Live CD with good anti-virus software to scan/repair Windows?

  - by overtherainbow

  Hello, I browsed through the archives, and it seems like there's no live CD from which to run a good, up-to-date anti-virus application, at least to check whether a Windows host has been compromised The Ultimate Boot CD has only three AV applications, and their virus definition is from... 2007 In a report, ClamAV scored very low. It's nice that it's open-source, but if it's not as good as commercial alternatives... Those of you into this kind of thing, do you confirm that there's just no good live CD to inspect Windows hosts, and possibly repair them? If there is, what do you recommend? Thank you.

  Read the article

• Apple XRaid questions

  - by luckytaxi

  I inherited an environment with a couple of apple xraid san. 1 - I have a 14 drive setup that's split into 5 LUNs on EACH side. The SAN goes into a fibre switch along w/ the servers that are attached to it. LUN masking is enabled on the SAN and as far as I know, there aren't any zoning on the fibre switch. Question, I have a server that's assigned two LUNs, one from each side of the controller. For some reason, it only sees one LUN (from the upper controller) and it doesn't see the one from the lower controller. The controller seems to be working fine as I have other servers attached to LUNs on the lower controller. 2 - I see a little "disclaimer" saying that any changes to the xraid will result in a reboot. So, if I add/remove hosts, this thing is going to reboot?!?!?!

  Read the article

• Plesk 10 Postfix with multiple IP adresses and SSL certificates

  - by JulianB

  We are currently running a root server with Debian 6 and Plesk 10.4.4. We have some virtual hosts using one IP adress (shared) - e.g. example1.com - and another virtual host using a dedicated IP address (example2.com). Is there a way to configure postfix to do the following Always use the IP address of the virtual host to which the e-mail account belongs (so that an e-mail from [email protected] will originate from the shared IP-Address and an e-mail from [email protected] will originate from the dedicated IP? Use different certificates for TLS for example1.com and example2.com? If the latter is not possible: Could any problems arrive when using example1.com as certificate for example2.com users? Of course, example2.com users would have to configure their clients to use example1.com as the SMTP server name to avoid annoying security warnings. But if we still would be able to get the effect of the first point that would still be acceptable.

  Read the article

• Apache2 conditional section based on port

  - by Waleed Hamra

  I don't know much about if statements in apache configuration, and I'm wondering if I can have a section of the configuration applied only if the request is received on a certain port. In short, this is about SSL. I have name based virtual hosts, I can make a configuration for port 80, then duplicate it all for port 443, and add the relevant SSL configurations. But this seems redundant. I was wondering if i can have something like: <VirtualHost *:80 *:443> and then I can put: <IfModule mod_ssl.c> SSLEngine on SSLCertificateFile ... SSLCertificateKeyFile ... SSLCACertificateFile ... </IfModule> inside an if statement that checks if connection is on port 443... or is such thing impossible? the server supports SNI, and I don't have any worries from non-SNI compliant browsers.

  Read the article

• Classic ASP on large memory server

  - by Steve Evans

  I have a client with a large ASP app that apparently is fairly memory intensive. I’m helping them migrate to new hardware they have running Win2k8 R2. They have 4 physical servers with 32gb of RAM each. I’m making the assumption that ASP apps run as a x32 process. So I see that we have two options: On the application pool enable web gardens. Use the physical servers as VM hosts and split the box into say 4 web servers each. Any thoughts on which path will provide us better performance? I’m just not really sure how ASP will handle a machine with lots of memory, and I’m worried it won’t really be able to address the memory well. (you can ignore all the obvious stuff like increased maintenance of 16 web servers vs 4, or the flexibility virtualization gets us over physical servers, etc)

  Read the article

• 127.0.0.1 is working but localhost is not working on mac XAMPP

  - by Ganim

  I installed XAMPP on my mac months ago and was working great. Now i get "Test Page For Apache Installation" when i try to browse /localhost and /localhost/xampp is not found. But when i browse /127.0.0.1 it just works as localhost used to be. I double checked my /etc/hosts file that i have 127.0.0.1 localhost and not commented. Also when i browse localhost/~username/test.php , i get contents of test.php: <?php echo 'ganim'; ?> but if i browse 127.0.0.1/~username/test.php , i get: ganim what could change redirecting of localhost or how can i get localhost work again?

  Read the article

• Is using Capistrano for user maintenance tasks on university lab feasible?

  - by danielkza

  I've been looking around for tools to replace some legacy scripts for creating and maintaining accounts in a university computer lab ecosystem consisting of things like: LDAP and Kerberos for authentication User home storage and web pages Entries on an SQL database Printing quotas Mailing lists, etc. I'd also like to automate machine and VM membership for Kerberos and Puppet if possiible. I've found Capistrano, and while the basic principle of running tasks on remote hosts through SSH seems to fit, and the DSL in Ruby looks quite nice, I've found most documentation is related to application deployment, not generic tasks. I'm also not aware of any good way to parameterize tasks so I can pass on the user information for creation. Is something about Capistrano I am missing, or is it not the correct tool for this job? Are there any more userful alternatives?

  Read the article

• Nagios - NagWin - Send notification with gmail

  - by Attila Bujáki

  I would like to send Nagios notifications using my gmail account. I have already set up my hosts I want to monitor and services also. What is the most simple way to accomplish this using NagWin on a Windows Server 2012 installation? As far as I know I must change some of these configuration settings: # 'notify-host-by-email' command definition define command{ command_name notify-host-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" -server ??? } # 'notify-service-by-email' command definition define command{ command_name notify-service-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" -server ??? } What should I use for smtp server? Is it possible to directly send my notifications to the Gmail server?

  Read the article

• rip in RouterSim

  - by Olga Anastasiadou

  I have to design a network given IPs 146.124.0.0/16 and 146.124.10.0/24. My given requirements are : at least 60 more subnets and maximum 1000 hosts per subnet and use of RIP. I have 3 routers (RA1, RA2, RA3) and 3 subnets (Sales, Logistic and Deposit). I gave WAN1 (RA1-RA3): 146.124.10.0/30, WAN2 (RA2-RA3) : 146.124.10.4/30 and WAN3 (RA1-RA2) : 146.124.10.8/30 and Sales : 146.124.0.0/22, Logistic: 146.124.4.0 and Deposit : 146.124.8.0. When I tried to configure RIP protocol, it didn’t work (I use routerSim 6). What am I doing wrong? Can anyone help please????

  Read the article

• Apache w/out internet connection

  - by robert knobulous

  I have a Vista laptop that I have been running Apache / MySql / Php / PhpMyAdmin on for quite some time without fail. I just use it to test bits of code here and there etc. No problems, until recently when I needed to test something and I happened to be in a place that I could not get an internet connection. Why am I unable to access localhost from the same machine without an internet connection? I am type http://localhost..etc into the browser's address bar and I get the message that I am unable to access without an internet connection. I checked my windows/system32/etc/hosts file and the first two lines are 127.0.0.1 localhost ::1 localhost What am I missing here?

  Read the article

• How do you enable syslogd to accept incoming connections on Snow Leopard from remote loggers?

  - by Emmel

  How do I get syslogd to accept incoming connections from remote hosts on Snow Leopard? I'd like to centralize logging such that various devices and systems send logs to Snow Leopard's syslogd, which normally hangs out on UDP 514. However, I'm unable to get them to successfully be accepted by good ole syslogd. I tcpdumped on the Snow Leopard box to verify that packets are being spouted to port 514 -- they are. I checked that syslogd is listening on 514 -- it's not. Googling around told me that, on older versions of OSX (don't you love the way things change so rapidly on OSX), one just had to add a flag to the syslogd daemon to allow remote; one did this in com.apple.syslogd.plist. However the syslogd daemon has no flags (at least in its man page) that suggests any remote anything. What's the solution to this? Secondary, less import but relevant question: What's 'newsyslog'? I see a plist file but it's not running (apparently). Thanks

  Read the article

• How to Host Multiple Domains / Web Sites on one IIS6 Server

  - by Josh Stodola

  I currently have an IIS6 server that hosts one web site/domain. I am developing another web site (completely separate) that I want to host on this same server. Both domains were purchased from GoDaddy. I believe I will need a server-side ISAPI rewrite filter to internally route the incoming requests based on the domain name. I plan to use Ionic's ISAPI Rewrite Filter to do this because it is free. I know how to install the ISAPI filter and apply it to a web site in IIS, but I have no clue how I am going to route the incoming requests correctly (based on the domain). Also, I don't know if it is wise to setup multiple "Web Sites" or "Virtual Directories". I am thinking that this will depend on how the configured. How should I go about getting this accomplished?

  Read the article

• How can I selectively increase latency? E.g. throttle games

  - by Arcymag

  Basically, I want networked games to run poorly on a network, but I want everything else to run smoothly. I would also appreciate advice on blocking games in general. As far as I can tell, there's a few ways to completely prevent an internet game from running: Blocking entirely via DNS configuration (e.g. hosts file), or router DNS configuration Blocking entirely via a separate DNS server Blocking the application, by uninstalling or some kind of access control Blocking the application by automatically killing the process every once in a while Blocking the application by corrupting files periodically However, I would like a more subtle way to block a program. Something that either: Increases latency (would this be doable through some kind of QoS like what DD-WRT offers?) Increases latency by using a special routing configuration for specific target IPs Throttle other systems resources, such as memory, IO, or CPU Screw around with keyboard configurations when a game is launched I would like this to work on MacOSX and Windows, but Linux would be great too. FYI I don't have a kid, but I was brainstorming with some friends and parents.

  Read the article

• Run one virtual machine on a Linux server + standard Linux functions

  - by fistameeny

  Hi, I am looking for a method to setup a Linux server (running Ubuntu Server) that uses Samba for file sharing, as well as hosting a Windows virtual machine (in this case, Windows Small Business Server 2003, which in turn hosts SQL Server Express - Exchange won't be used on this). I would like to have the Linux server serving the files over Samba, and hosting the Virtual Machine. This obviously rules ESXi out as it couldn't do Samba at the same time. What would be the next best solution to give reasonable speed? Vmware Server 2.0, VirtualBox, Xen? There will be 10-15 users accessing the Samba shares and the SQL Express virtual machine. Matt

  Read the article

• Getting FC11 to run under VMware Server, converted from physical machine

  - by Kristian

  I have a FC11 installation that I have converted to a VMware disk image to run om my VMware Server. I converted it with qemu-img, as the VMware Converter software apparently only converts Linux hosts to VMware Infrastructure servers. The disk image boots fine (grub is loaded and boots the kernel) but it seems like the disk is not found by the kernel, and the boot process stalls. Hotplugging USB devices work (the kernel prints debug information) and I'm able to press keys (Ctrl-Alt-Delete for instance). The VMware guest OS is set to RedHat Enterprise Linux 5 (32 bit), and I have tried both the LSI Logic, LSI Logic SAS and VMware Accelerated SCSI SCSI controllers, to no avail. I'm able to boot an installer disk and get into rescue mode and mount the filesystem, so my question is, what do I need to do to the guest kernel / initrd image to make it recognize the virtual disk?

  Read the article

• NIS client cannot find NIS server (Opensuse)

  - by Tony

  I installed NIS server on head node of a virtual cluster(VirtualBox). One of the node (let's say node-1) can find NIS server and work with it, but another node (node-2) just can't find the NIS server in Yast while it can ping and ssh to both head node and node-1. BTW, all the nodes are VMs, head node and node-1 are on the same physical machine, node-2 is on another physical machine. I set the domain name in /etc/hosts and /etc/yp.conf, and ypwhich sometimes gives the correct domainname several minutes later complains about "ypwhich: Can't communicate with ypbind", and will back to work after some time. Also tried rpcinfo -p hostname and it worked as expected. I almost tried every thing I can find on internet, but seems that not many people had this problem. Any help would be very appreciated.

  Read the article

• Getting rid of Plesk on a VPS

  - by TomA

  I've been using a relatively expensive VPS for hosting about 30 domains and I want to migrate to a cheaper one, without Plesk. Both use CentOS. My users will not care, they don't use Plesk anyway. But I will not be able to use it for creating new virtual hosts, FTP accounts etc. I'm not a commandline guru, esp. not in a server environment. Is there a free Plesk alternative for these purposes? I need to: Create a new virtual host with it's own FTP account Setup some basic FTP quota I don't need: DNS management (the new VPS service has an external DNS management GUI) Mail server management (I use Google Apps) Any suggestions welcome, from Plesk alternatives to "RTFM" or links to tutorials.

  Read the article

• OSX 10.6 integration into NIS/netgroup/automount infrastructure

  - by mdpc

  I have an existing infrastructure where accounts are maintained under NIS (yp) with no local unix accounts. Also, all the standard maps including hosts, mail aliases, netgroups, etc...are maintained in this form. Extensive use of the UNIX/Linux automounter with items scattered over the network on NFS servers. There are NO ACLs on any local or shared files. All mail needs to use basically the nullclient sendmail configuration feeding into a different system. I now have a requirement to integrate an Apple OSX 10.6 system into this environment and make it run seamlessly. My initial reading and second-hand information seems to indicate that this may not be possible on the native OSX 10.6 system. I'm concerned. Any ideas as to how to accomplish this task and make everybody happy? Thanks PS: I have never used an Apple OSX system.

  Read the article

• Windows Server - Dual NIC Bandwidth Pooling

  - by tsilb

  I have a Windows Server 2008 machine with dual NICs. Both are plugged into the same switch in a typical one-switch, one-gateway home network. This server is used almost exclusively for inbound connections. It hosts a web server (IIS 6), SQL server, and file server (via LAN UNC paths and mapped drives). How do I make best use of inbound bandwidth across both NICs? For example, if I connect to it by hostname and one of the interfaces has high traffic, I'd like the new connection to use the other interface.

  Read the article

• Cannot ping ubuntu server by hostname - can only ping by IP

  - by Tone

  I have an unbuntu 9.10 server and have set the hostname to "fileserver" When I try to ping fileserver from a client machine it doesn't find it, however I can ping by the IP my router assigns it. I have tried changing the ip in /etc/hosts from this: 127.0.0.1 fileserver to this: 192.168.1.109 fileserver which is the ip being assigned. I had a previous install of this server and i had no issues with this - only difference in this install is i did not select any of the options such as LAMP, OpenSSH, etc during the install process. I can access the machine fine by ip using PuTTY. Any ideas?

  Read the article

• Sporadic '.Xauthority not writable, changes will be ignored' going from OSX -> Linux

  - by Kamil Kisiel

  Every now and then when users SSH from their OS X (Snow Leopard) workstation to one of our Linux hosts they receive the message: /usr/bin/xauth: ~/.Xauthority not writable, changes will be ignored Of course, their X forwarded applications will not work at this point. However, if they log out and log right back in again they do not get the message and everything works as expected. On their Mac they get their home directory via AFP. The Linux machines get it via NFS. Any ideas on what could be going on here?

  Read the article

• RTF File Opens as Read Only from Document Management System (Does not happen for all users)

  - by Dave

  We have a third party system in place that as one part of its duties hosts RTF files that a user can open, make changes to, and save back into the document management system. Recently we have begun upgrading users to Office 2007 from 2003. We are now hearing that when some users open these documents, they open as Read Only (even though there is no document protection in place and the files are set for Unrestricted Access). Other users though, who also have Word 2007, report no problems. There were no problems for anyone when Word 2003 was being used. I'm sure it's a setting in Word but I'm having a lot of difficulty in identifying where the issue could be. Looking for any assistance on why these RTF files are opening as Read Only for some and not for others when using Word 2007. Thanks! Dave

  Read the article

• Static Routes and the Routing Table

  - by TheD

  This is very much a learning question if someone would be happy to explain a couple of concepts. My question is - the default routing table that exists in, in my case, a default Windows 7 install, what do each of the routes in the table do? Here is a screenshot: The 10.128.4.0 is just a route I've added while messing. I understand from a question I posted on Superuser the first route is just a default route that will route all traffic for any IP to my default gateway on my Interface in use. But what about the others? And how would the routing table handle a machine with multiple NIC's, perhaps connected to two different networks, or maybe even two NIC's on the same network so a VM can have a physical Network card instead of each VM sharing the hosts. Thanks!

  Read the article

• 2 HP Procurve 4000M switches and Comcast SMC Gateway

  - by Cole Tierney

  We've got 2 HP Procurve 4000M switches joined by a trunk. Switch 1 is connected to a Cisco 2600 router which is connected to a T1. Internet traffic for hosts on switch 2 must pass through the trunk to switch 1. We're now switching to Comcast who's given us 4 port SMC router. I would like to connect each switch to the comcast router to reduce traffic on the trunk, but I don't want to create a loop. The switches support spanning tree protocol, but I don't know how this would work with the comcast router. Would a triangle network like this work? Thanks for any tips.

  Read the article

• How can I suppress /etc/issue without losing error messages?

  - by Andy

  Is it possible to tell the ssh client to not print the connects of /etc/issue to stdout when connecting to a remote host, but to print out any other diagnostic (e.g. error) messages? Either using ssh -q or having LogLevel quiet in ~/.ssh/config suppresses the /etc/issue printing, but also turn off error messages. I've tried touching ~/.hushlogin as well - that stops /etc/motd being printed, but doesn't affect /etc/issue. The most obvious solution is just to remove /etc/issue, but company policy dictates the file be there with dire warnings about unauthorised access. This is non-negotiable. Unfortunately, I've got a bunch of scripts that run across quite a few hosts via ssh, and the log files are a) very large and b) full of legalese. Since quite a lot of stuff runs unattended, I don't want to lose any error messages that are printed.

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >