Search Results

Search found 3496 results on 140 pages for 'reset'.

Page 94/140 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• Ubuntu won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Using Movemail with Thunderbird on Ubuntu

  - by rxt

  I'm trying to read local mail with Thunderbird on Ubuntu (with both 12.04 and 13.04). I've followed the instructions found here: How can I access system mail in /var/mail/ via thunderbird? I can read mail on the system using alpine or vim, so I know the mailbox is not empty. When I click the get-mail button, nothing happens. I see no Inbox (or any folder structure) for the specific account. I've set the rights for /var/mail to 1777. Settings server name: localhost username: john How can I get this working? Okay, considering the extra bounty, I would like to get this working like normal mail. The accepted answer from Qasim resulted in a much more usable situation than before - opening mail in Thunderbird with layout. I still face three problems though. When new mail is received in the mailbox, Thunderbird won't see this until after I restart Thunderbird. When Thunderbird is restarted, all mail is reset to unread and deleted mail is undone. This is probably because Thunderbird reads the mail from the /var/mail/www-data file, but doesn't update this file. So after restarting, it simply reads this file again, with the new mail and all old mail. This is probably a postfix issue: mail is sent out to existing mail addresses, but cannot be delivered because the receiving mailserver cannot be reached. This results in "Undelivered mail returned to sender". Only one mailserver can be reached: localhost. Because this is a test system, I don't want real customers to receive mail. I've blocked mail ports in UFW to be sure. When opening the returned mail, I can scroll down and then I see the original mail with proper layout. So I can read the mail, see if the proper images are included, and for me that's workable. Having to restart TB to read new mail - I know when new mail arrives, so I know when to restart. Having old mail restored after a restart - not big problem as well. I can delete the mail file if it gets too much. I know how it works, but it would be nice if it worked like normal.

  Read the article

• Ubuntu 10.10 forgets desktop theme.

  - by Marcelo Cantos

  (I posed this question on superuser.com and haven't received any answers or comments, then I came across this site, so my apologies to anyone who has seen this already.) I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matt white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

  Read the article

• x axis detection issues platformer starter kit

  - by dbomb101

  I've come across a problem with the collision detection code in the platformer starter kit for xna.It will send up the impassible flag on the x axis despite being nowhere near a wall in either direction on the x axis, could someone could tell me why this happens ? Here is the collision method. /// <summary> /// Detects and resolves all collisions between the player and his neighboring /// tiles. When a collision is detected, the player is pushed away along one /// axis to prevent overlapping. There is some special logic for the Y axis to /// handle platforms which behave differently depending on direction of movement. /// </summary> private void HandleCollisions() { // Get the player's bounding rectangle and find neighboring tiles. Rectangle bounds = BoundingRectangle; int leftTile = (int)Math.Floor((float)bounds.Left / Tile.Width); int rightTile = (int)Math.Ceiling(((float)bounds.Right / Tile.Width)) - 1; int topTile = (int)Math.Floor((float)bounds.Top / Tile.Height); int bottomTile = (int)Math.Ceiling(((float)bounds.Bottom / Tile.Height)) - 1; // Reset flag to search for ground collision. isOnGround = false; // For each potentially colliding tile, for (int y = topTile; y <= bottomTile; ++y) { for (int x = leftTile; x <= rightTile; ++x) { // If this tile is collidable, TileCollision collision = Level.GetCollision(x, y); if (collision != TileCollision.Passable) { // Determine collision depth (with direction) and magnitude. Rectangle tileBounds = Level.GetBounds(x, y); Vector2 depth = RectangleExtensions.GetIntersectionDepth(bounds, tileBounds); if (depth != Vector2.Zero) { float absDepthX = Math.Abs(depth.X); float absDepthY = Math.Abs(depth.Y); // Resolve the collision along the shallow axis. if (absDepthY < absDepthX || collision == TileCollision.Platform) { // If we crossed the top of a tile, we are on the ground. if (previousBottom <= tileBounds.Top) isOnGround = true; // Ignore platforms, unless we are on the ground. if (collision == TileCollision.Impassable || IsOnGround) { // Resolve the collision along the Y axis. Position = new Vector2(Position.X, Position.Y + depth.Y); // Perform further collisions with the new bounds. bounds = BoundingRectangle; } } //This is the section which deals with collision on the x-axis else if (collision == TileCollision.Impassable) // Ignore platforms. { // Resolve the collision along the X axis. Position = new Vector2(Position.X + depth.X, Position.Y); // Perform further collisions with the new bounds. bounds = BoundingRectangle; } } } } } // Save the new bounds bottom. previousBottom = bounds.Bottom; }

  Read the article

• GNU/Linux interactive table content GUI editor?

  - by sdaau

  I often find myself in the need to gather data (say from the internet), into a table, for comparison reasons. I usually need the final table output in HTML or MediaWiki mostly, but often times also Latex. My biggest problem is that I often forget the correct table syntax for these markup languages, as well as what needs to be properly escaped in the inline data, for the table to render correctly. So, I often wish there was a GUI application, which provides a tabular framework - which I could stick "Always on Top" as a desktop window, and I could paste content into specific cells - before finally exporting the table as a code in the correct language. One application that partially allows this is Open/LibreOffice calc: The good thing here is that: I can drag and drop browser content into a specifically targeted table cell (here B2) "Rich" text / HTML code gets pasted For long content, the cell (column) width stays put as it originally was The bad thing is, that: when the cell height (due to content size) becomes larger than the calc window, it becomes nearly impossible to scroll calc contents up and down (at least with the mousewheel), as the view gets reset to top-right corner of the selected cell calc shows an "endless"/unlimited field of cells, so not exactly a "table" - which I find visually very confusing (and cognitively taxing) Can only export table to HTML What I would need is an application that: Allows for a limited size table, but with quick adding of rows and columns (e.g. via corresponding + buttons) Allows for quick setup of row and column height and width (as well as table size) Stays put at those sizes, regardless of size of content pasted in; if cell content overflows, cell scrollbars are shown (cell content could be possibly re-edited in a separate/new window); if table overflows over window size, window scrollbars are shown Exports table in multiple formats (I'd need both HTML and mediawiki), properly escaping cell content for each (possibility to strip HTML tags from content pasted in cells, to get plain text, is a plus) Targeting a specific cell in the table for the content paste operation is a must - it doesn't have to be drag'n'drop though, a right click over a cell with "Paste content" is enough. I'd also want the ability to click in a specific cell and type in (plain text) content immediately. So, my question is: is there an application out there that already does something like this? The reason I'm asking is that - as the screenshots show - for instance Libre/OpenOffice allows it, but only somewhat (as using it for that purpose is tedious). I know there exist some GUI editors for Linux (both for UI like guile or HTML like amaya); but I don't know them enough to pinpoint if any of them would offer this kind of functionality (and at least in my searches, that kind of functionality, if present in diverse software, seems not to be advertised). Note I'm not interested in styling an HTML table, which is why I haven't used "table designer" in the title, but "table editor" (in lack of better terms) - I'm interested in (quickly) adjusting row/column size of the table, and populating it with pasted data (which is possibly HTML) in a GUI; and finally exporting such a table as self-contained HTML (or other) code.

  Read the article

• SQL SERVER – DELETE, TRUNCATE and RESEED Identity

  - by pinaldave

  Yesterday I had a headache answering questions to one of the DBA on the subject of Reseting Identity Values for All Tables. After talking to the DBA I realized that he has no clue about how the identity column behaves when there is DELETE, TRUNCATE or RESEED Identity is used. Let us run a small T-SQL Script. Create a temp table with Identity column beginning with value 11. The seed value is 11. USE [TempDB] GO -- Create Table CREATE TABLE [dbo].[TestTable]( [ID] [int] IDENTITY(11,1) NOT NULL, [var] [nchar](10) NULL ) ON [PRIMARY] GO -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO When seed value is 11 the next value which is inserted has the identity column value as 11. – Select Data SELECT * FROM [TestTable] GO Effect of DELETE statement -- Delete Data DELETE FROM [TestTable] GO When the DELETE statement is executed without WHERE clause it will delete all the rows. However, when a new record is inserted the identity value is increased from 11 to 12. It does not reset but keep on increasing. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] Effect of TRUNCATE statement -- Truncate table TRUNCATE TABLE [TestTable] GO When the TRUNCATE statement is executed it will remove all the rows. However, when a new record is inserted the identity value is increased from 11 (which is original value). TRUNCATE resets the identity value to the original seed value of the table. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] GO Effect of RESEED statement If you notice I am using the reseed value as 1. The original seed value when I created table is 11. However, I am reseeding it with value 1. -- Reseed DBCC CHECKIDENT ('TestTable', RESEED, 1) GO When we insert the one more value and check the value it will generate the new value as 2. This new value logic is Reseed Value + Interval Value – in this case it will be 1+1 = 2. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] GO Here is the clean up act. -- Clean up DROP TABLE [TestTable] GO Question for you: If I reseed value with some random number followed by the truncate command on the table what will be the seed value of the table. (Example, if original seed value is 11 and I reseed the value to 1. If I follow up with truncate table what will be the seed value now? Here is the complete script together. You can modify it and find the answer to the above question. Please leave a comment with your answer. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

• How do I prevent having to log in on 3 separate prompts every time I start my machine?

  - by JC

  Ubuntu 11.04 Natty Narwhal, Ubuntu Classic desktop Each time I start my machine, I have to log in 3 times. I spent a week in IRCFreenode#ubuntu and got nothing but condescension. I've searched on the official Ubuntu fora for similar problems, tried every recommendation, and still get 3 login screens. As a workaround, I have reset login such that I get a login screen at startup, which I'd prefer not to get since this machine is accessible by no one but me, physically. I have gone into System Preferences Passwords and Encryption Keys, set first 'Passwords: default' to 'Default' and unlocked it, and unlocked the 'Passwords: login' key, too. Next, since that changed nothing, I set 'Passwords: login' to 'Default', and checked to make sure it was still unlocked. Again, no change, still get 3 login prompts at startup. I've checked twice to insure that I am the owner of the files; I am. At the suggestion of several people in #ubuntu, I've deleted first one, then the other password key in 'Passwords and Encryption Keys'. Still get 3 login prompts. I changed from the Unity desktop to Ubuntu Classic. While that didn't fix the above problem, it is a much more elegant desktop than Unity, and I'll keep it. From what I've read, this seems to be a Seahorse issue, but beyond that, no one seems to have a solution that works. I'm lost. This shouldn't be this difficult or annoying. I'm trying to help our local Old Time music collective get their machines switched over to Ubuntu in order to save them some money which they can use to promote their DRM-free music. But from what I've seen of Ubuntu so far on my own machine, I can't really recommend that they make this switch. I hope to be proved wrong on that point. But as it stands, if I was out of town or out of country and they ran into a problem, they'd have no way of fixing it as they're all less experienced than even I am. I'm not trying to cast aspersions on Ubuntu or Linux, but it seems pretty clear that KNOWLEDGEABLE, HELPFUL support for Ubuntu is lacking barring any desire on the problem-experiencing-user's part to avoid condescension. Having worked with, and run, several non-profits over the past 20 years, I know that getting volunteers to act professionally can be like herding cats. But an organization's reputation can be denigrated by sarcastic behaviors on the part of those who serve, effectively, as its public face. Thank you all for your help and support. Now...does anyone have a solution to my problem?

  Read the article

• Remove Clutter from the Opera Speed Dial Page

  - by Asian Angel

  Do you want to clean up the Speed Dial page in Opera so that only the thumbnails are visible? Today we show you a couple of tweaks that will make it happen. Speed Dial Page The search bar and text at the bottom take up room and add clutter to the look and feel of Opera’s Speed Dial page. Changing the Settings Two small tweaks to the config settings will clean it all up. To get started type opera:config into the address bar and press enter. Type “speed” into the quick find bar and look for the Speed Dial State entry. Change the 1 to 2 and click save. You will see the following message concerning the changes…click OK. Next type “search” into the quick find bar and look for the Speed Dial Search Type entry. Remove all of the text in the blank and click save. Once again you will see a message about the latest change that you have made. At this point you may need to restart Opera for both changes to take full effect. There will be a noticeable difference in how the Speed Dial page looks afterwards and is much cleaner without the Search bar and text field. You will also still be able to access the right click context menu just like before. Conclusion If you have been looking to get a cleaner and less cluttered Speed Dial page in Opera, then these two little hacks will get the job done! Similar Articles Productive Geek Tips Set the Speed Dial as the Opera Startup PageReplace Google Chrome’s New Tab Page with Speed DialSpeed up Windows Vista Start Menu Search By Limiting ResultsBlank New Tab Quick-Fix for Google ChromeMonitor and Control Memory Usage in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone

  Read the article

• Good Customer Service Example

  - by MightyZot

  Here’s another good customer service example for you! My wife purchased a Galaxy last week and she loves the phone.  She asked me to add it to our AT&T Microcell last night. I purchased the AT&T Microcell a couple of years ago, because cell signal out where I live sucks! Since microcells are managed on the AT&T web site, I went to the site and tried to sign in. Naturally, having not managed that microcell in a couple of years…and much to my chagrin…I discovered that I didn’t know my password OR my user ID. So, I decided to call and see if I could get my account reset that late in the day (we’re talking last night, so it was well after 7pm.) I called the technical support line, touched the appropriate numbers to navigate to microcell support, turned on my speaker phone, and prepared for the long wait. After about 45 seconds I was delighted to hear “Jeffrey” break in and ask what he could help me with. I explained that I have not managed my microcell for some time and had forgotten the user name and password.  “No problem”, he replied, and he asked me for the line I used to register the microcell. After confirming the last four digits of my IMEI number, he asked me for my wife’s number. I gave him my wife’s number and he said, “I’ve taken care of it Mr Pope. Just have her reboot her phone and you should see your microcell.” We rebooted her phone, it connected to the microcell, and voila, she was online! “Is there anything else I can help you with while I’ve got you on the line”, he said. “Nope”, I replied. “Ok, have a great night.” What made this a great customer service experience for me was that “Jeffrey” didn’t stop at giving me my user account and password, which I would probably forget anyway after setting up my wife’s new phone. Instead, he solved the real problem for me – adding my wife’s new phone to my microcell. Great job Jeffrey!

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• Cursor running wild, then crashes on an Asus G73sw

  - by Yarchmon

  The cursor sometimes goes wild, I get random clicks, the windows are resizing, the cursor disappears. In the worst case, clicks and keyboards are disabled. I've tried the solution given on doc.ubuntu-fr.org and add tu grub : i8042.nomux=1 i8042.reset=1 in GRUB_CMDLINE_LINUX_DEFAULT But it didn't work What can I do ? Graphic card : Geforce GTX460M. Ubuntu : 11.10 (64 bits). Laptop Asus G73sw Interface : Unity (since 11.10) - didn't get this problem with Gnome before. Complement: when a window is resizing, it gets drag-boxes at every corner, center of sides and center of the window. It looks like my touchpad sends random info, or like a "ghost" touchscreen. lspci result : 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GTX 460M] (rev a1) 01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB Controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Edit 01-09-12: Tried on Ubuntu 2D: the behavior is different: it's like i'm randomly clicking on the workspace switcher icon. In the worst case, it can happen several times in a minute.

  Read the article

• how do I set quad buffering with jogl 2.0

  - by tony danza

  I'm trying to create a 3d renderer for stereo vision with quad buffering with Processing/Java. The hardware I'm using is ready for this so that's not the problem. I had a stereo.jar library in jogl 1.0 working for Processing 1.5, but now I have to use Processing 2.0 and jogl 2.0 therefore I have to adapt the library. Some things are changed in the source code of Jogl and Processing and I'm having a hard time trying to figure out how to tell Processing I want to use quad buffering. Here's the previous code: public class Theatre extends PGraphicsOpenGL{ protected void allocate() { if (context == null) { // If OpenGL 2X or 4X smoothing is enabled, setup caps object for them GLCapabilities capabilities = new GLCapabilities(); // Starting in release 0158, OpenGL smoothing is always enabled if (!hints[DISABLE_OPENGL_2X_SMOOTH]) { capabilities.setSampleBuffers(true); capabilities.setNumSamples(2); } else if (hints[ENABLE_OPENGL_4X_SMOOTH]) { capabilities.setSampleBuffers(true); capabilities.setNumSamples(4); } capabilities.setStereo(true); // get a rendering surface and a context for this canvas GLDrawableFactory factory = GLDrawableFactory.getFactory(); drawable = factory.getGLDrawable(parent, capabilities, null); context = drawable.createContext(null); // need to get proper opengl context since will be needed below gl = context.getGL(); // Flag defaults to be reset on the next trip into beginDraw(). settingsInited = false; } else { // The following three lines are a fix for Bug #1176 // http://dev.processing.org/bugs/show_bug.cgi?id=1176 context.destroy(); context = drawable.createContext(null); gl = context.getGL(); reapplySettings(); } } } This was the renderer of the old library. In order to use it, I needed to do size(100, 100, "stereo.Theatre"). Now I'm trying to do the stereo directly in my Processing sketch. Here's what I'm trying: PGraphicsOpenGL pg = ((PGraphicsOpenGL)g); pgl = pg.beginPGL(); gl = pgl.gl; glu = pg.pgl.glu; gl2 = pgl.gl.getGL2(); GLProfile profile = GLProfile.get(GLProfile.GL2); GLCapabilities capabilities = new GLCapabilities(profile); capabilities.setSampleBuffers(true); capabilities.setNumSamples(4); capabilities.setStereo(true); GLDrawableFactory factory = GLDrawableFactory.getFactory(profile); If I go on, I should do something like this: drawable = factory.getGLDrawable(parent, capabilities, null); but drawable isn't a field anymore and I can't find a way to do it. How do I set quad buffering? If I try this: gl2.glDrawBuffer(GL.GL_BACK_RIGHT); it obviously doesn't work :/ Thanks.

  Read the article

• LWJGL - Mixing 2D and 3D

  - by nathan

  I'm trying to mix 2D and 3D using LWJGL. I have wrote 2D little method that allow me to easily switch between 2D and 3D. protected static void make2D() { glEnable(GL_BLEND); GL11.glMatrixMode(GL11.GL_PROJECTION); GL11.glLoadIdentity(); glOrtho(0.0f, SCREEN_WIDTH, SCREEN_HEIGHT, 0.0f, 0.0f, 1.0f); GL11.glMatrixMode(GL11.GL_MODELVIEW); GL11.glLoadIdentity(); } protected static void make3D() { glDisable(GL_BLEND); GL11.glMatrixMode(GL11.GL_PROJECTION); GL11.glLoadIdentity(); // Reset The Projection Matrix GLU.gluPerspective(45.0f, ((float) SCREEN_WIDTH / (float) SCREEN_HEIGHT), 0.1f, 100.0f); // Calculate The Aspect Ratio Of The Window GL11.glMatrixMode(GL11.GL_MODELVIEW); glLoadIdentity(); } The in my rendering code i would do something like: make2D(); //draw 2D stuffs here make3D(); //draw 3D stuffs here What i'm trying to do is to draw a 3D shape (in my case a quad) and i 2D image. I found this example and i took the code from TextureLoader, Texture and Sprite to load and render a 2D image. Here is how i load the image. TextureLoader loader = new TextureLoader(); Sprite s = new Sprite(loader, "player.png") And how i render it: make2D(); s.draw(0, 0); It works great. Here is how i render my quad: glTranslatef(0.0f, 0.0f, 30.0f); glScalef(12.0f, 9.0f, 1.0f); DrawUtils.drawQuad(); Once again, no problem, the quad is properly rendered. DrawUtils is a simple class i wrote containing utility method to draw primitives shapes. Now my problem is when i want to mix both of the above, loading/rendering the 2D image, rendering the quad. When i try to load my 2D image with the following: s = new Sprite(loader, "player.png); My quad is not rendered anymore (i'm not even trying to render the 2D image at this point). Only the fact of creating the texture create the issue. After looking a bit at the code of Sprite and TextureLoader i found that the problem appears after the call of the glTexImage2d. In the TextureLoader class: glTexImage2D(target, 0, dstPixelFormat, get2Fold(bufferedImage.getWidth()), get2Fold(bufferedImage.getHeight()), 0, srcPixelFormat, GL_UNSIGNED_BYTE, textureBuffer); Commenting this like make the problem disappear. My question is then why? Is there anything special to do after calling this function to do 3D? Does this function alter the render part, the projection matrix?

  Read the article

• Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 4)

  - by hinkmond

  And now here's the Java code that you'll need to read your ghost sensor on your Raspberry Pi The general idea is that you are using Java code to access the GPIO pin on your Raspberry Pi where the ghost sensor (JFET trasistor) detects minute changes in the electromagnetic field near the Raspberry Pi and will change the GPIO pin to high (+3 volts) when something is detected, otherwise there is no value (ground). Here's that Java code: try { /*** Init GPIO port(s) for input ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port File exportFileCheck = new File("/sys/class/gpio/gpio"+gpioChannel); if (exportFileCheck.exists()) { unexportFile.write(gpioChannel); unexportFile.flush(); } // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write(GPIO_IN); } /*** Read data from each GPIO port ***/ RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; int sleepPeriod = 10; final int MAXBUF = 256; byte[] inBytes = new byte[MAXBUF]; String inLine; int zeroCounter = 0; // Get current timestamp with Calendar() Calendar cal; DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd HH:mm:ss.SSS"); String dateStr; // Open RandomAccessFile handle to each GPIO port for (int channum=0; channum And, then we just load up our Java SE Embedded app, place each Raspberry Pi with a ghost sensor attached in strategic locations around our Santa Clara office (which apparently is very haunted by ghosts from the Agnews Insane Asylum 1906 earthquake), and watch our analytics for any ghosts. Easy peazy. See the previous posts for the full series on the steps to this cool demo: Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 1) Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 2) Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 3) Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 4) Hinkmond

  Read the article

• Changing Silverlight application themes at runtime

  We have received a lot of questions how can the application theme be changed at run time. The most important thing here to mark is that each time the application theme is changed all the controls should be re-drawn. Without going into too much detail, we could explain the application themes as a mechanism to replace the content of the Generic.xaml file in every loaded Telerik assembly at runtime. This does not affect the controls that already have default style applied, hence the need to create new instances. Because in the Silverlight applications the RootVisual cannot be changed at run time, we need a way to reset the application UI. The following code is in App.xaml.cs. private void Application_Startup(object sender, StartupEventArgs e)     {           // Before:           // this.RootVisual = new MainPage();            this.RootVisual = new Grid();         this.ResetRootVisual();     }        public void ResetRootVisual()     {         var rootVisual = Application.Current.RootVisual as Grid;         rootVisual.Children.Clear();         rootVisual.Children.Add(new MainPage());     }   In Application_Startup() instead of creating new MainPage UserControl instance as RootVisual, we create a new Grid panel, that will contain the MainPage UserControl. In the ResetRootVisual() method we create the instance of MainPage and add it to the RootVisual panel. Then we have to create a method in the code behind which will set StyleManager.ApplicationTheme and then will call the ResetRootVisual() method: private void ChangeApplicationTheme(Theme theme) {     StyleManager.ApplicationTheme = theme;     (Application.Current as App).ResetRootVisual(); }   Here you can find an example which illustrates the described implementation of a Silverlight theme. For more information please refer to Teleriks online demos for Silverlight, the demos for WPF and help documentation for WPF and help documentation for Silverlight. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Java: How to manage UDP client-server state

  - by user92947

  I am trying to write a Java application that works similar to MapReduce. There is a server and several workers. Workers may come and go as they please and the membership to the group has a soft-state. To become a part of the group, the worker must send a UDP datagram to the server, but to continue to be part of the group, the worker must send the UDP datagram to the server every 5 minutes. In order to accommodate temporary errors, a worker is allowed to miss as many as two consecutive periodic UDP datagrams. So, the server must keep track of the current set of workers as well as the last time each worker had sent a UDP datagram. I've implemented a class called WorkerListener that implements Runnable and listens to UDP datagrams on a particular UDP port. Now, to keep track of active workers, this class may maintain a HashSet (or HashMap). When a datagram is received, the server may query the HashSet to check if it is a new member. If so, it can add the new worker to the group by adding an entry into the HashSet. If not, it must reset a "timer" for the worker, noting that it has just heard from the corresponding worker. I'm using the word timer in a generic sense. It doesn't have to be a clock of sorts. Perhaps this could also be implemented using int or long variables. Also, the server must run a thread that continuously monitors the timers for the workers to see that a client that times out on two consecutive datagram intervals, it is removed from the HashSet. I don't want to do this in the WorkerListener thread because it would be blocking on the UDP datagram receive() function. If I create a separate thread to monitor the worker HashSet, it would need to be a different class, perhaps WorkerRegistrar. I must share the HashSet with that thread. Mutual exclusion must also be implemented, then. My question is, what is the best way to do this? Pointers to some sample implementation would be great. I want to use the barebones JDK implementation, and not some fancy state maintenance API that takes care of everything, because I want this to be a useful demonstration for a class that I am teaching. Thanks

  Read the article

• SQL Azure Security: DoS Part II

  - by Herve Roggero

  Ah!  When you shoot yourself in the foot... a few times... it hurts! That's what I did on Sunday, to learn more about the behavior of the SQL Azure Denial Of Service prevention feature. This article is a short follow up to my last post on this feature. In this post, I will outline some of the lessons learned that were the result of testing the behavior of SQL Azure from two machines. From the standpoint of SQL Azure, they look like one machine since they are behind a NAT. All logins affected The first thing to note is that all the logins are affected. If you lock yourself out to a specific database, none of the logins will work on that database. In fact the database size becomes "--" in the SQL Azure Portal.   Less than 100 sessions I was able to see 50+ sessions being made in SQL Azure (by looking at sys.dm_exec_sessions) before being locked out. The the DoS feature appears to be triggered in part by the number of open sessions. I could not determine if the lockout is triggered by the speed at which connection requests are made however.   Other Databases Unaffected This was interesting... the DoS feature works at the database level. Other databases were available for me to use.   Just Wait Initially I thought that going through SQL Azure and connecting from there would reset the database and allow me to connect again. Unfortunately this doesn't seem to be the case. You will have to wait. And the more you lock yourself out, the more you will have to wait... The first time the database became available again within 30 seconds or so; the second time within 2-3 minutes and the third time... within 2-3 hours...   Successful Logins The DoS feature appears to engage only for valid logins. If you have a login failure, it doesn't seem to count. I ran a test with over 100 login failures without being locked.

  Read the article

• Actor and Sprite, who should own these properties?

  - by Gerardo Marset

  I'm writing sort of a 2D game engine for making the process of creating games easier. It has two classes, Actor and Sprite. Actor is used for interactive elements (the player, enemies, bullets, a menu, an invisible instance that controls score, etc) and Sprite is used for animated (or not) images with transparency (or not). The actor may have an assigned sprite that represents it on the screen, which may change during the game. E.g. in a top-down action game you may have an actor with a sprite of a little guy that changes when attacking, walking, and facing different directions, etc. Currently the actor has x and y properties (its coordinates in the screen), while the sprite has an index property (the number of the frame currently being shown by the sprite). Since the sprite doesn't know which actor it belongs to (or if it belongs to an actor at all), the actor must pass its x and y coordinates when drawing the sprite. Also, since a actors may reset its sprite each frame (and usually do), the sprite's index property must be passed from the old to the new sprite like so (pseudocode): function change_sprite(new_sprite) old_index = my.sprite.index my.sprite = new_sprite() my.sprite.index = old_index % my.sprite.frames end I always thought this was kind of cumbersome, but it never was a big problem. Now I decided to add support for more properties. Namely a property to draw the sprite rotated, a property to draw it flipped, it a property draw it stretched, etc. These should probably belong to the sprite and not the actor, but if they do, the actor would have to pass them from the old to the new sprite each time it changes... On the other hand, if they belonged to the actor, the actor would have to pass each property to the sprite when drawing it (since the sprite doesn't know which actor it belongs to, and it shouldn't, since sprites aren't just meant to be used by actors, really). Another option I thought of would be having an extra class that owns all these properties (plus index, x and y) and links an actor with a sprite, but that doesn't come without drawbacks. So, what should I do with all these properties? Thanks!

  Read the article

• Addressing threats introduced by the BYOD trend

  - by kyap

  With the growth of the mobile technology segment, enterprises are facing a new type of threats introduced by the BYOD (Bring Your Own Device) trend, where employees use their own devices (laptops, tablets or smartphones) not necessarily secured to access corporate network and information.In the past - actually even right now, enterprises used to provide laptops to their employees for their daily work, with specific operating systems including anti-virus and desktop management tools, in order to make sure that the pools of laptop allocated are spyware or trojan-horse free to access the internal network and sensitive information. But the BYOD reality is breaking this paradigm and open new security breaches for enterprises as most of the username/password based systems, especially the internal web applications, can be accessed by less or none protected device.To address this reality we can adopt 3 approaches:1. Coué's approach: Close your eyes and assume that your employees are mature enough to know what he/she should or should not do.2. Consensus approach: Provide a list of restricted and 'certified' devices to the internal network. 3. Military approach: Access internal systems with certified laptop ONLYIf you choose option 1: Thanks for visiting my blog and I hope you find the others entries more useful :)If you choose option 2: The proliferation of new hardware and software updates every quarter makes this approach very costly and difficult to maintain.If you choose option 3: You need to find a way to allow the access into your sensitive application from the corporate authorized machines only, managed by the IT administrators... but how? The challenge with option 3 is to find out how end-users can restrict access to certain sensitive applications only from authorized machines, or from another angle end-users can not access the sensitive applications if they are not using the authorized machine... So what if we find a way to store the applications credential secretly from the end-users, and then automatically submit them when the end-users access the application? With this model, end-users do not know the username/password to access the applications so even if the end-users use their own devices they will not able to login. Also, there's no need to reconfigure existing applications to adapt to the new authenticate scheme given that we are still leverage the same username/password authenticate model at the application level. To adopt this model, you can leverage Oracle Enterprise Single Sign On. In short, Oracle ESSO is a desktop based solution, capable to store credentials of Web and Native based applications. At the application startup and if it is configured as an esso-enabled application - check out my previous post on how to make Skype essso-enabled, Oracle ESSO takes over automatically the sign-in sequence with the store credential on behalf of the end-users. Combined with Oracle ESSO Provisioning Gateway, the credentials can be 'pushed' in advance from an actual provisioning server, like Oracle Identity Manager or Tivoli Identity Manager, so the end-users can login into sensitive application without even knowing the actual username and password, so they can not login with other machines rather than those secured by Oracle ESSO.Below is a graphical illustration of this approach:With this model, not only you can protect the access to sensitive applications only from authorized machine, you can also implement much stronger Password Policies in terms of Password Complexity as well as Password Reset Frequency but end-users will not need to remember the passwords anymore.If you are interested, do not hesitate to check out the Oracle Enterprise Single Sign-on products from OTN !

  Read the article

• A starting point for Use Cases and User Stories

  - by Mike Benkovich

  Originally posted on: http://geekswithblogs.net/benko/archive/2013/07/23/a-starting-point-for-use-cases-and-user-stories.aspxSoftware is a challenging business and is rife with opportunities to go wrong. Over the years a number of methodologies have evolved to help make sure that things go right. In an effort to contribute to this I’ve created a list of user stories that I think should be included and sometimes are just assumed. Note this is a work in progress, so I’m looking for your feedback. I’m curious what you would add or change in my list. · As a DBA I am working with a Normalized data model that reflects an agreed upon logical model for the system · As a DBA I am using consistent names for my fields which match the naming standards of my organization · As a DBA my model supports simple CRUD operations against all the entities · As an Application Architect the UI has been validated against the Business requirements and a complete set of user story’s have been created · As an Application Architect the database model has been validated against the UI · As an Application Architect we have a logical business model that describes all the known and/or expected usage of the system during the software’s expected lifecycle · As an Application Architect we have a Deployment diagram that describes how the application components will be deployed · As an Application Architect we have a navigation diagram that describes the typical application flow · As an Application Architect we have identified points of interaction which describes how the UI interacts with the services and the data storage · As an Application Architect we have identified external systems which may now or in the future use the data of this application and have adapted the logical model to include these interactions · As an Application Architect we have identified existing systems and tools that can be extended and/or reused to help this application achieve it’s business goals · As a Project Manager all team members understand the goals of each release and iteration as they are planned · As a Project Manager all team members understand their role and the roles of others · As a Project Manager we have support of the business to do the right thing even if it is not the expedient thing · As a Test/QA Analyst we have created a simulation environment for testing the system which does not use sensitive data and accurately reflects the scenarios of all the data that will be supported by the system · As a Test/QA Analyst we have identified the matrix of supported clients used to access the system including the likely browsers, mobile devices and other interfaces to work with the application · As a Test/QA Analyst we have created exit criteria for each user story that match the requirements of the business story that was used to create them · As a Test/QA Analyst we have access to a Test environment that is isolated from production and staging environments · As a Test/QA Analyst there we have a way to reset the environment so we can rerun tests when a new version of the software becomes available · As a Test/QA Analyst I am able to automate portions of the test process Thoughts? -mike

  Read the article

• OOF checklist

  - by Daniel Moth

  When going on vacation or otherwise being out of office (known as OOF in Microsoft), it is polite and professional that our absence creates the minimum disruption possible to the rest of the business, and especially our colleagues. Below is my OOF checklist - I try to do these as soon as I know I'll be OOF, rather than leave it for the night before. Let the relevant folks on the team know the planned dates of absence and check if anybody was expecting something from you during that timeframe. Reset expectations with them, and as applicable try to find another owner for individual activities that cannot wait. Go through your calendar for the OOF period and decline every meeting occurrence so the owner of the meeting knows that you won't be attending (similar to my post about responding to invites). If it is your meeting cancel it so that people don’t turn up without the meeting organizer being there. Do this even for meetings were the folks should know due to step #1. Over-communicating is a good thing here and keeps calendars all around up to date. Enter your OOF dates in whatever tool your company uses. Typically that is the notification to your manager. In your Outlook calendar, create a local Appointment (don't invite anyone) for the date range (All day event) setting the "Show As" dropdown to "Out of Office". This way, people won’t try to schedule meetings with you on that day. If you use Lync, set the status to "Off Work" for that period. If you won't be responding to email (which when on your vacation you definitely shouldn't) then in Outlook setup "Automatic Replies (Out of Office)" for that period. This way people won’t think you are rude when not replying to their emails. In your OOF message point to an alias (ideally of many people) as a fallback for urgent queries. If you want to proactively notify individuals of your OOFage then schedule and send a multi-day meeting request for the entire period. Remember to set the "Show As" to "Free" (so their calendar doesn’t show busy/oof to others), set the "Reminder" to "None" (so they don’t get a reminder about it), set "Low Importance", and uncheck both "Response Options" so if they don't want this on their calendar, it is just one click for them to get rid of it. Aside: I have another post with advice on sending invites. If you care about people who would not observe the above but could drop by your office, stick a physical OOF note at your office door or chair/monitor or desk. Have I missed any? Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• 12.04 Unity 3D 80% CPU load with Compiz

  - by user39288

  EDIT : I have been able to to determine that the problem is not compiz, but is actually Xorg. I don't know why, but by quickly maximizing terminal and taking a screenshot with top running before the problem went away I am able to see xorg takes up 72% of cpu, with bamfdaemon taking up 18%, and compiz taking up 14%. Seems the nvidia drivers are to blame, will play more with settings and perhaps do a clean nvidia-current install to try to fix the problem. Having a very annoying problem with high CPU usage. Running 12.04 with latest drivers and nvidia-current installed. Have not had any issues for days, now I have a strange problem. Unity 3d runs great most of the time, 1-2% CPU usage with only transmission running in background. Windows open and close smoothly. However,no matter what programs are open, if I minimize all open programs to the unity bar on the left, my CPU jumps to about 80% and slows down all maximize and minimize effects. Mouse movement stays smooth the whole time, but unity becomes unresponsive for up to 30 seconds at times. Hitting alt + tab to bring up even a single window fixes the problem. The window I bring back up doesn't even have to be maximized to solve the problem. Hitting the super button to bring up the dash makes CPU drop back to idle until I close it, then high CPU usage resumes. Believe the problem is compiz, but even just having only terminal running "top", I have to minimize it to the tray for the problem to show, so I can't see the problem process. I can only tell about the high CPU usage using indicator-sysmonitor. Even tried quitting the indicator, but I can still tell very poor performance with all applications when minimized. Reset compiz back to defaults, tried going to the post-release update nvidia drivers, played with vsync settings in both the nvidia settings and compiz. Even forced refresh rate, but cannot solve the problem. The problem does NOT occur in Unity 2D. Specs are core 2 duo 2.0ghz, 4GB ddr2 ram, 2x 320's HDD in RAID 0, and Nvidia GTX 260M graphics card.

  Read the article

• Generate MERGE statements from a table

  - by Bill Graziano

  We have a requirement to build a test environment where certain tables get reset from production every night.  These are mainly lookup tables.  I played around with all kinds of fancy solutions and finally settled on a series of MERGE statements.  And being lazy I didn’t want to write them myself.  The stored procedure below will generate a MERGE statement for the table you pass it.  If you have identity values it populates those properly.  You need to have primary keys on the table for the joins to be generated properly.  The only thing hard coded is the source database.  You’ll need to update that for your environment.  We actually used a linked server in our situation. CREATE PROC dba_GenerateMergeStatement (@table NVARCHAR(128) )ASset nocount on; declare @return int;PRINT '-- ' + @table + ' -------------------------------------------------------------'--PRINT 'SET NOCOUNT ON;--'-- Set the identity insert on for tables with identitiesselect @return = objectproperty(object_id(@table), 'TableHasIdentity')if @return = 1 PRINT 'SET IDENTITY_INSERT [dbo].[' + @table + '] ON; 'declare @sql varchar(max) = ''declare @list varchar(max) = '';SELECT @list = @list + [name] +', 'from sys.columnswhere object_id = object_id(@table)SELECT @list = @list + [name] +', 'from sys.columnswhere object_id = object_id(@table)SELECT @list = @list + 's.' + [name] +', 'from sys.columnswhere object_id = object_id(@table)-- --------------------------------------------------------------------------------PRINT 'MERGE [dbo].[' + @table + '] AS t'PRINT 'USING (SELECT * FROM [source_database].[dbo].[' + @table + ']) as s'-- Get the join columns ----------------------------------------------------------SET @list = ''select @list = @list + 't.[' + c.COLUMN_NAME + '] = s.[' + c.COLUMN_NAME + '] AND 'from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk , INFORMATION_SCHEMA.KEY_COLUMN_USAGE cwhere pk.TABLE_NAME = @tableand CONSTRAINT_TYPE = 'PRIMARY KEY'and c.TABLE_NAME = pk.TABLE_NAMEand c.CONSTRAINT_NAME = pk.CONSTRAINT_NAMESELECT @list = LEFT(@list, LEN(@list) -3)PRINT 'ON ( ' + @list + ')'-- WHEN MATCHED ------------------------------------------------------------------PRINT 'WHEN MATCHED THEN UPDATE SET'SELECT @list = '';SELECT @list = @list + ' [' + [name] + '] = s.[' + [name] +'],'from sys.columnswhere object_id = object_id(@table)-- don't update primary keysand [name] NOT IN (SELECT [column_name] from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk , INFORMATION_SCHEMA.KEY_COLUMN_USAGE c where pk.TABLE_NAME = @table and CONSTRAINT_TYPE = 'PRIMARY KEY' and c.TABLE_NAME = pk.TABLE_NAME and c.CONSTRAINT_NAME = pk.CONSTRAINT_NAME)-- and don't update identity columnsand columnproperty(object_id(@table), [name], 'IsIdentity ') = 0 --print @list PRINT left(@list, len(@list) -3 )-- WHEN NOT MATCHED BY TARGET ------------------------------------------------PRINT ' WHEN NOT MATCHED BY TARGET THEN';-- Get the insert listSET @list = ''SELECT @list = @list + '[' + [name] +'], 'from sys.columnswhere object_id = object_id(@table)SELECT @list = LEFT(@list, LEN(@list) - 1)PRINT ' INSERT(' + @list + ')'-- get the values listSET @list = ''SELECT @list = @list + 's.[' +[name] +'], 'from sys.columnswhere object_id = object_id(@table)SELECT @list = LEFT(@list, LEN(@list) - 1)PRINT ' VALUES(' + @list + ')'-- WHEN NOT MATCHED BY SOURCEprint 'WHEN NOT MATCHED BY SOURCE THEN DELETE; 'PRINT ''PRINT 'PRINT ''' + @table + ': '' + CAST(@@ROWCOUNT AS VARCHAR(100));';PRINT ''-- Set the identity insert OFF for tables with identitiesselect @return = objectproperty(object_id(@table), 'TableHasIdentity')if @return = 1 PRINT 'SET IDENTITY_INSERT [dbo].[' + @table + '] OFF; 'PRINT ''PRINT 'GO'PRINT '';

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by Torben Gundtofte-Bruun

  My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >