Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 95/365 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Experience with AMCC 3ware 9650se raid cards? Ours seems dead

    - by antiduh
    We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

    Read the article

  • Accessing through VPN, which internet connection would be used

    - by Sriram
    I've a data card which has a limit of 2 GB up/download traffic per month. I've an office internet line which has an unlimited up/download. I've successfully connected to VPN using my data card and by changing certain configurations like DNS etc., have also been able to use my office line for internet (verified by doing a IP check - returns the static IP of our office). Now to my question - is it just a NAT which is happening or am I actually using my office line for all communication. Which one would reflect the usage/trace. The data card usage log at this moment does not reflect any usage (which is confusing since the VPN is over the data card connection). Further more (theoretically), would the net be any faster if my office line is let us say 8Mbps and the data card is 512kbps by doing this as against directly connecting the internet using the data card.

    Read the article

  • guvcview recording video and audio out of synchronisation in Ubuntu 10.10

    - by SIJAR
    I finally got Guvcview, a great software for Logitech webcam and it does all the stuff that one wants out of it. But I'm not satisfy with the video recording, video and audio out of synchronisation also video seems to be in slow motion. Please help so that I can tweak in and get a good video recording with the webcam. Below is the log of Guvcview ------------------------------------------------------------------------------- guvcview 1.4.1 video_device: /dev/video0 vid_sleep: 0 cap_meth: 1 resolution: 640 x 480 windowsize: 1024 x 715 vert pane: 578 spin behavior: 0 mode: mjpg fps: 1/25 Display Fps: 0 bpp: 0 hwaccel: 1 avi_format: 4 sound: 1 sound Device: 4 sound samp rate: 0 sound Channels: 0 Sound delay: 0 nanosec Sound Format: 85 Pan Step: 2 degrees Tilt Step: 2 degrees Video Filter Flags: 0 image inc: 0 profile(default):/home/sijar/default.gpfl starting portaudio... bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started language catalog= dir:/usr/share/locale type:UTF-8 lang:en_US.utf8 cat:guvcview.mo mjpg: setting format to 1196444237 capture method = 1 video device: /dev/video0 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! /dev/video0 - device 1 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! Init. UVC Camera (046d:0825) (location: usb-0000:00:1d.7-5) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 176 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 432, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 544, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 640, height = 360 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, ... repeats a couple of times ... vid:046d pid:0825 driver:uvcvideo Adding control for Pan (relative) UVCIOC_CTRL_ADD - Error: Operation not permitted checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls control[0]: 0x980900 Brightness, 0:255:1, default 128 control[0]: 0x980901 Contrast, 0:255:1, default 32 control[0]: 0x980902 Saturation, 0:255:1, default 32 control[0]: 0x98090c White Balance Temperature, Auto, 0:1:1, default 1 control[0]: 0x980913 Gain, 0:255:1, default 0 control[0]: 0x980918 Power Line Frequency, 0:2:1, default 2 control[0]: 0x98091a White Balance Temperature, 0:10000:10, default 4000 control[0]: 0x98091b Sharpness, 0:255:1, default 24 control[0]: 0x98091c Backlight Compensation, 0:1:1, default 1 control[0]: 0x9a0901 Exposure, Auto, 0:3:1, default 3 control[0]: 0x9a0902 Exposure (Absolute), 1:10000:1, default 166 control[0]: 0x9a0903 Exposure, Auto Priority, 0:1:1, default 0 resolutions of format(2) = 19 frame rates of 1º resolution=6 Def. Res: 0 numb. fps:6 --------------------------------------- device #0 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 (hw:0,0) Host API = ALSA Max inputs = 2, Max outputs = 2 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #1 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC ADC (hw:0,1) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #2 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC2 ADC (hw:0,2) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #3 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - ADC2 (hw:0,3) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #4 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - IEC958 (hw:0,4) Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #5 Name = USB Device 0x46d:0x825: USB Audio (hw:1,0) Host API = ALSA Max inputs = 1, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #6 Name = front Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.012 Def. high input latency = -1.000 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #7 Name = iec958 Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #8 Name = spdif Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #9 Name = pulse Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #10 Name = dmix Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.043 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #11 [ Default Input, Default Output ] Name = default Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 ---------------------------------------------- SampleRate:0 Channels:0 Video driver: x11 A window manager is available VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25371756K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cbd8b0]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cbd8b0]profile Baseline, level 3.0 [libx264 @ 0x8cbd8b0]non-strictly-monotonic PTS shift sound by -9 ms shift sound by -9 ms shift sound by -9 ms AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... AUDIO: droping audio data (/home/sijar/Videos/Webcam) 25371748K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... Cap Video toggled: 0 Shuting Down IO Thread AUDIO: droping audio data stop= 4426644744000 start=4416533023000 VIDEO: 146 frames in 10111.000000 ms = 14.439719 fps Stoping audio stream Closing audio stream... close avi Last message repeated 145 times [libx264 @ 0x8cbd8b0]frame I:2 Avg QP:14.10 size: 24492 [libx264 @ 0x8cbd8b0]frame P:103 Avg QP:16.06 size: 20715 [libx264 @ 0x8cbd8b0]mb I I16..4: 48.4% 0.0% 51.6% [libx264 @ 0x8cbd8b0]mb P I16..4: 57.5% 0.0% 0.0% P16..4: 40.2% 0.0% 0.0% 0.0% 0.0% skip: 2.3% [libx264 @ 0x8cbd8b0]final ratefactor: 62.05 [libx264 @ 0x8cbd8b0]coded y,uvDC,uvAC intra: 79.7% 92.2% 68.4% inter: 62.4% 87.5% 48.0% [libx264 @ 0x8cbd8b0]i16 v,h,dc,p: 23% 17% 41% 19% [libx264 @ 0x8cbd8b0]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 24% 26% 2% 5% 3% 3% 3% 4% [libx264 @ 0x8cbd8b0]i8c dc,h,v,p: 53% 20% 23% 4% [libx264 @ 0x8cbd8b0]ref P L0: 63.0% 37.0% [libx264 @ 0x8cbd8b0]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25379744K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cfba20]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cfba20]profile Baseline, level 3.0 [libx264 @ 0x8cfba20]non-strictly-monotonic PTS shift sound by -236 ms shift sound by -236 ms shift sound by -236 ms (/home/sijar/Videos/Webcam) 25377044K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25373408K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25370696K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25367680K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25364052K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25360312K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25356628K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25352908K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25349316K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25345552K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25341828K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25338092K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25334412K bytes free on a total of 39908968K (used: 36 %) treshold=51200K Cap Video toggled: 0 Shuting Down IO Thread stop= 4708817235000 start=4578624714000 VIDEO: 1604 frames in 130192.000000 ms = 12.320265 fps Stoping audio stream Closing audio stream... close avi Last message repeated 1603 times [libx264 @ 0x8cfba20]frame I:16 Avg QP:14.78 size: 42627 [libx264 @ 0x8cfba20]frame P:1547 Avg QP:16.44 size: 28599 [libx264 @ 0x8cfba20]mb I I16..4: 21.6% 0.0% 78.4% [libx264 @ 0x8cfba20]mb P I16..4: 28.1% 0.0% 0.0% P16..4: 70.5% 0.0% 0.0% 0.0% 0.0% skip: 1.4% [libx264 @ 0x8cfba20]final ratefactor: 88.17 [libx264 @ 0x8cfba20]coded y,uvDC,uvAC intra: 74.4% 95.8% 83.2% inter: 75.2% 94.6% 69.2% [libx264 @ 0x8cfba20]i16 v,h,dc,p: 27% 17% 40% 16% [libx264 @ 0x8cfba20]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 25% 21% 3% 6% 4% 5% 4% 7% [libx264 @ 0x8cfba20]i8c dc,h,v,p: 61% 18% 18% 4% [libx264 @ 0x8cfba20]ref P L0: 64.0% 36.0% [libx264 @ 0x8cfba20]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Shuting Down Thread Thread terminated... cleaning Thread allocations: 100% SDL Quit Video Thread finished write /home/sijar/.guvcviewrc OK free audio mutex closed v4l2 strutures free controls free controls - vidState cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK

    Read the article

  • Ralink RT3060 wireless device configuration on ubuntu 12.04

    - by Stephan
    concerning How do I get a Ralink RT3060 wireless card working? I'm running Ubuntu 12.04 with a 'LWPX07 Edimax EW-7711In 150M 1T1R WL PCI Card' which has a rt3060 chip. Out of the box the card is recognized as rt2800sta. I tried solution one, that didn't work. Still the card connects to the wireless network, but it seems to slow to load any pages. Then I tried solution 2, but then the network-manager doesn't see any wireless device. $ iwconfig lo no wireless extensions. ra0 Ralink STA Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. $ lsmod Module Size Used by rt3562sta 882296 0 $ lspci -v 05:02.0 Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Edimax Computer Co. Device 7711 Flags: bus master, slow devsel, latency 64, IRQ 23 Memory at ff9f0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2860 Kernel modules: rt3562sta, rt2800pci Am I missing a configuration step? How do I tell the network card which driver to use? Thanks in advance Stephan I found the problem. As described in stevens blog http://steveswinsburg.wordpress.com/2011/03/12/how-to-install-a-d-link-dwa-525-wireless-network-card-in-ubuntu-10-04/ sudo su make && make install "You need to use ‘sudo su’ and not just ‘sudo’ so it creates the directories properly." That is the problem with the solution describe above.

    Read the article

  • what is the best program to capture my workings as an AVI or MPEG

    - by raihanchy
    I have already used recordmydesktop, xvidcap and kazam. My sound working fine with other audio or videos. xvidcap doesn't record sound at all. I have tried many ways. If I try as: 'padsp xvidcap', it also gives error, like: /dev/dsp cannot found or missing. I have changed it to /dev/snd. Still no effect. Even I can record sound through gnome-sound-recorder - after pressing record button, I open pavucontrol. Then from Recording tab, I choose 'Monitor of Analog Stereo'. But if I run xvidcap, I don't get that option in pavucontrol. kazam works a bit slow. It records at the beginning of the captured video. But for unknown reason, it eventually the sounds just go off. Also the video is not smooth as xvidcap. Though Kazam output as H64/MP4. Record my Desktop also doesn't give sound. Can you guys please help me, either - how to get sound with xvidcap or how kazam could be record nicely. I am looking something Camtasia, as used for Windows. Thanks in advance. Raihan

    Read the article

  • hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

    - by user108754
    I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

    Read the article

  • Dealing with numerous, simultaneous sounds in unity

    - by luxchar
    I've written a custom class that creates a fixed number of audio sources. When a new sound is played, it goes through the class, which creates a queue of sounds that will be played during that frame. The sounds that are closer to the camera are given preference. If new sounds arrive in the next frame, I have a complex set of rules that determines how to replace the old ones. Ideally, "big" or "important" sounds should not be replaced by small ones. Sound replacement is necessary since the game can be fast-paced at times, and should try to play new sounds by replacing old ones. Otherwise, there can be "silent" moments when an old sound is about to stop playing and isn't replaced right away by a new sound. The drawback of replacing old sounds right away is that there is a harsh transition from the old sound clip to the new one. But I wonder if I could just remove that management logic altogether, and create audio sources on the fly for new sounds. I could give "important" sounds more priority (closer to 0 in the corresponding property) as opposed to less important ones, and let Unity take care of culling out sound effects that exceed the channel limit. The only drawback is that it requires many heap allocations. I wonder what strategy people use here?

    Read the article

  • Why does ATI 5570 HD video card driver installation cause Windows 7 To Blue Screen?

    - by Mort
    This one is for the hive mind. I have a brand new Dell Optiplex 760 workstation with 4 gigabytes of RAM running Windows 7 Professional (32bit). This is a new box with nothing installed other than what was provided for directly by Dell. I installed a Saphire ATI PCI Express 5570 HD. Upon trying to install the 10.4 Catalyst drivers the system will blue screen. It blue screens during the hardware detection phase of the installation process. I have already performed the following trouble shooting steps: Changed system RAM Installed only 2 gigabytes of RAM Installed different versions of Catalyst drivers (10.4 - 9.12) Tried to install video only component of driver (vs entire Catalyst suite) Made sure Windows 7 was fully updated Flashed mother board BIOS to current version Removed and re-seated video card Contacted ATI Support (We all know how this went......) Verified supply outputting properly The blue screen error (via Windows BugCheck entry in event log) is a 0x000000CA and refers to a plug and play error most likely caused by a bad driver. The problem is that the driver installation process never gets far enough to actually install a driver. The resolution center in Windows provides a solution of installing the 10.4 Catalyst driver to resolve issue (which fails). Looking for some alternate views to resolve.

    Read the article

  • Video output vanishes and it isn't the video card... suggestions?

    - by Ira Baxter
    I have a high-end dual processor Dell workstation that operated for several years without problem. Recently, the video output has gone flaky, in the sense that after 2-3 days, it loses synch with the monitor (sometimes you can still see a hashed-mess of the what you expect to see on the screen). Poking at the keyboard, and accessing the file system on the machine from over the network, indicates that the machine is running fine and its just the video. A reboot fixes the problem... for another day or two. This in effect makes the machine unusable. So, I replaced the video card with an exact duplicate bought from e-bay. (I checked after the dupe arrived to be sure, yep, same model number). I still get the same behavior. So unless I believe that both video cards are broken the same way, I have to beleive this is a problem with the motherboard/power supply, neither of which I am inclined to replace. The only other possibility I can think of is a Windows update to the graphics driver. How would I check for this? Anybody had a similar problem? Otherwise we're junking what used to be a perfectly good machine. (Another couple of hours of more wasted effort and that's it in terms of economics anyway).

    Read the article

  • GUI interfaces to ATI card behave weirdly out of the box and after updates.

    - by jdk
    My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

    Read the article

  • Low-profile, PCI Express, x1 video card with VGA-out?

    - by Dandy
    I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

    Read the article

  • How to send Sound Stream of a file from disk over network using FMOD?

    - by chris
    Hey everyone, i'm currently working on a project in college. my application should do some things with audio files from my computer. i'm using FMOD as sound library. the problem i have is, that i dont know how to access the data of a soundfile (wich was opened and startet using the FMOD methods) to stream it over network for playback on another pc in the net. does anyone has a similar problem?! any help is apreciated. thanks in advance. chris

    Read the article

  • C# WinForms: How to load an image, then wait a few seconds, then play a mp3 sound ?

    - by ibmkahm
    Hello everybody, (after pressing a button) i would like to show an image (using a picturebox), wait a few seconds and then play a mp3 sound, but i dont get it to work. To wait a few seconds i use "System.Threading.Thread.Sleep(5000)". The problem is, the image alway appears AFTER the wait time, but i want it to show first, then wait, then play the mp3... i tried to use "WaitOnLoad = true" but it doesnt work, shouldn't it load the image first and the continue to read the next code line ?? Here is the code i've tried, that doesnt work: private void button1_Click(object sender, EventArgs e) { pictureBox1.WaitOnLoad = true; pictureBox1.Load("image.jpg"); System.Threading.Thread.Sleep(5000); MessageBox.Show("test"); //just to test, here should be the code to play the mp3 } (i also tried loading the image with "LoadAsync" and put the code to wait and play the mp3 in the "LoadCompleted" event, but that doesnt work either...) would be very nice if somebody helps me

    Read the article

  • Is PNG the most economically sound file format to store pictures in?

    - by raoulsson
    I am looking for an economically sound solution to store pictures long time. I read about the PNG file format that it has superior characteristics compared to JPEG, namely in these categories: no patents, no licenses, no royalities no quality loss yet compressed I have a lot of big ESP's from PhotoShop that contain tons of metadata, like layers and color profiles that I don't need to store (those were handy for the designer, when he worked with it). I want to convert these images without that hidden data, to a new target file format. Another side condition to my question is that the target file format has to be displayable in the browser. So I guess my options are limited anyway: GIF, JPEG, PNG. Am I missing something or is PNG the best fit for my case?

    Read the article

  • Best practices for packaging resources (jpg's, sound, video) in an iPhone app?

    - by Mel
    I'm a newb iPhone developer writing an app that has several large JPGs and sound files. Everything works ok if I drag these non-code resources into my project. But I am wondering if this is the right way to package my app. In Windows development, I would create a "resource DLL" that keeps the .exe size small. What is the equivalent for iPhone? I think I should be creating a "bundle" - can someone please give me some pointers to using these and how to link them into my main project? Thanks!

    Read the article

  • why is this rails association loading individually after an eager load?

    - by codeman73
    I'm trying to avoid the N+1 queries problem with eager loading, but it's not working. The associated models are still being loaded individually. Here are the relevant ActiveRecords and their relationships: class Player < ActiveRecord::Base has_one :tableau end Class Tableau < ActiveRecord::Base belongs_to :player has_many :tableau_cards has_many :deck_cards, :through => :tableau_cards end Class TableauCard < ActiveRecord::Base belongs_to :tableau belongs_to :deck_card, :include => :card end class DeckCard < ActiveRecord::Base belongs_to :card has_many :tableaus, :through => :tableau_cards end class Card < ActiveRecord::Base has_many :deck_cards end and the query I'm using is inside this method of Player: def tableau_contains(card_id) self.tableau.tableau_cards = TableauCard.find :all, :include => [ {:deck_card => (:card)}], :conditions => ['tableau_cards.tableau_id = ?', self.tableau.id] contains = false for tableau_card in self.tableau.tableau_cards # my logic here, looking at attributes of the Card model, with # tableau_card.deck_card.card; # individual loads of related Card models related to tableau_card are done here end return contains end Does it have to do with scope? This tableau_contains method is down a few method calls in a larger loop, where I originally tried doing the eager loading because there are several places where these same objects are looped through and examined. Then I eventually tried the code as it is above, with the load just before the loop, and I'm still seeing the individual SELECT queries for Card inside the tableau_cards loop in the log. I can see the eager-loading query with the IN clause just before the tableau_cards loop as well. EDIT: additional info below with the larger, outer loop Here's the larger loop. It is inside an observer on after_save def after_save(pa) @game = Game.find(turn.game_id, :include => :goals) @game.players = Player.find :all, :include => [ {:tableau => (:tableau_cards)}, :player_goals ], :conditions => ['players.game_id =?', @game.id] for player in @game.players player.tableau.tableau_cards = TableauCard.find :all, :include => [ {:deck_card => (:card)}], :conditions => ['tableau_cards.tableau_id = ?', player.tableau.id] if(player.tableau_contains(card)) ... end end end

    Read the article

  • Memory issues - Living vs. overall -> app is killed

    - by D33
    I'm trying to check my applications memory issues in Instruments. When I load the application I play some sounds and show some animations in UIImageViews. To save some memory I load the sounds only when I need it and when I stop playing it I free it from the memory. problem 1: My application is using about 5.5MB of Living memory. BUT The Overall section is growing after start to 20MB and then it's slowly growing (about 100kB/sec). But responsible Library is OpenAL (OAL::Buffer), dyld (_dyld_start)-I am not sure what this really is, and some other stuff like ft_mem_qrealloc, CGFontStrikeSetValue, … problem 2: When the overall section breaks about 30MB, application crashes (is killed). According to the facts I already read about overall memory, it means then my all allocations and deallocation is about 30MB. But I don't really see the problem. When I need some sound for example I load it to the memory and when I don't need it anymore I release it. But that means when I load 1MB sound, this operation increase overall memory usage with 2MB. Am I right? And when I load 10 sounds my app crashes just because the fact my overall is too high even living is still low??? I am very confused about it. Could someone please help me clear it up? (I am on iOS 5 and using ARC) SOME CODE: creating the sound OpenAL: MYOpenALSound *sound = [[MyOpenALSound alloc] initWithSoundFile:filename willRepeat:NO]; if(!sound) return; [soundDictionary addObject:sound]; playing: [sound play]; dispatch_after(dispatch_time(DISPATCH_TIME_NOW, ((sound.duration * sound.pitch) + 0.1) * NSEC_PER_SEC), dispatch_get_current_queue(), ^{ [soundDictionary removeObjectForKey:[NSNumber numberWithInt:soundID]]; }); } creating the sound with AVAudioPlayer: [musics replaceObjectAtIndex:ID_MUSIC_MAP withObject:[[Music alloc] initWithFilename:@"mapMusic.mp3" andWillRepeat:YES]]; pom = [musics objectAtIndex:musicID]; [pom playMusic]; and stop and free it: [musics replaceObjectAtIndex:ID_MUSIC_MAP withObject:[NSNull null]]; AND IMAGE ANIMATIONS: I load images from big PNG file (this is realated also to my other topic : Memory warning - UIImageView and its animations) I have few UIImageViews and by time I'm setting animation arrays to play Animations... UIImage *source = [[UIImage alloc] initWithCGImage:[[UIImage imageNamed:@"imageSource.png"] CGImage]]; cutRect = CGRectMake(0*dimForImg.width,1*dimForImg.height,dimForImg.width,dimForImg.height); image1 = [[UIImage alloc] initWithCGImage:CGImageCreateWithImageInRect([source CGImage], cutRect)]; cutRect = CGRectMake(1*dimForImg.width,1*dimForImg.height,dimForImg.width,dimForImg.height); ... image12 = [[UIImage alloc] initWithCGImage:CGImageCreateWithImageInRect([source CGImage], cutRect)]; NSArray *images = [[NSArray alloc] initWithObjects:image1, image2, image3, image4, image5, image6, image7, image8, image9, image10, image11, image12, image12, image12, nil]; and this array I just use simply like : myUIImageView.animationImages = images, ... duration -> startAnimating

    Read the article

  • REBOL: How to do another task while waiting an alarm to trigger ?

    - by Rebol Tutorial
    So I have created an alarm function: alarm: func[seconds message [string! unset!]][ wav: load %attention.wav sound-port: open sound:// wait seconds do [ insert sound-port wav wait sound-port close sound-port if (value? 'message) [ print message ] ] ] which works like this: alarm 30 "Will trigger in 30 seconds" Now how can I for example show a timer which increments while waiting for the alarm since Rebol doesn't support thread ?

    Read the article

  • Best advice for setting up Ubuntu on my mother's computer

    - by idealmachine
    Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

    Read the article

  • 13.04 Logitech bluetooth speaker adapter pairing but no mixer output

    - by user1455622
    I had to change [General] Enable = Socket in /etc/bluetooth/audio.conf to get it to pair. But now that they are I don't get an output in pavucontrol. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPAG on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPHS on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSource on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSink on adapter /org/bluez/3855/hci0. E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: Unknown Bluetooth minor device class 0 D: [pulseaudio] module-card-restore.c: Not restoring profile for card bluez_card.C8_84_47_15_B7_34, because already set. I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card bluez_card.C8_84_47_15_B7_34. I: [pulseaudio] card.c: Created 2 "bluez_card.C8_84_47_15_B7_34" W: [pulseaudio] module-bluetooth-device.c: Profile has no transport D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] card.c: Changed profile of card 2 "bluez_card.C8_84_47_15_B7_34" to off I: [pulseaudio] module.c: Loaded "module-bluetooth-device" (index: #22; argument: "address=C8:84:47:15:B7:34 profile=a2dp"). I: [alsa-source] alsa-source.c: Scheduling delay of 10,06ms, you might want to investigate this to improve latency... I: [alsa-source] ratelimit.c: 5 events suppressed I: [alsa-source] alsa-source.c: Overrun! I: [alsa-source] alsa-source.c: Increasing minimal latency to 2,00 ms D: [alsa-source] alsa-source.c: latency set to 20,00ms D: [alsa-source] alsa-source.c: hwbuf_unused=62008 D: [alsa-source] alsa-source.c: setting avail_min=442 What can I do to get it working? Regards,

    Read the article

  • Setting up Ubuntu on my mother's computer

    - by idealmachine
    Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

    Read the article

  • How to Export a Contact to and Import a Contact from a vCard (.vcf) File in Outlook 2013

    - by Lori Kaufman
    vCard is the abbreviation for Virtual Business Card and is the standard format (.vcf files) for electronic business cards. vCards allow you to create and share contact information over the internet, such as in email messages and instant messaging. You can also use vCards to move contact information from one email or personal information management program to another, as long as both programs support the .vcf file format. vCards can contain name and address information, as well as phone numbers, email addresses, URLs, images, and audio clips. We will show you how to export a contact to and import a contact from a vCard, or .vcf file, in Outlook. First access the People section by clicking People at the bottom of the Outlook window. To view your contact in business card format, click Business Card in the Current View section of the Home tab. Select a contact by clicking on the name bar at the top of the business card. To export the selected contact as a vCard, click the File tab. On the Account Information screen, click Save As in the list of options on the left. The Save As dialog box displays. By default, the name of the contact is used to name the .vcf file in the File name edit box. Change the name, if desired, select a location for the file, and click Save. The contact is saved as a .vcf file. To import a vCard, or .vcf file, into Outlook, simply double-click on the .vcf file. By default, .vcf files are automatically associated with Outlook, so the file is opened in Outlook as a Contact. Make any changes or additions to the contact in the contact editing window. To save the contact, click Save & Close in the Actions section of the Contact tab. NOTE: Notice that because this contact is new, the full contact editing window displays rather than the Contact Card that displays when double-clicking on a contact. You can open the full contact editing window instead of the Contact Card when editing a contact or searching for a contact. The contact is added to the Contacts folder. You can add your contact information to a signature in business card format, and it will display as shown above in emails. We have covered how to create signatures and will be discussing more about signatures and business cards in Outlook.     

    Read the article

  • Great Customer Service Example

    - by MightyZot
    A few days ago I wrote about what I consider a poor customer service interaction with TiVo, a company that I have been faithful to for the past 12 years or so. In that post I talked about how they helped me, but I felt like I was doing something wrong at the end of the call – when in reality I was just following through with an offer that TiVo made possible through my cable company. Today I had a wonderful customer service interaction with American Express, another company that I have been loyal to for many years.(I am a Gold Card member.) I like my Amex card because I can use it for big purchases and it forces me to pay them off at the end of the month. Well, the reality is that I’m not always so good at doing that, so sometimes my payments are over a couple of months.  :) A few days ago I received an email from “American Express” fraud detection. The email stated that I should call a toll free number and have the last four digits of my card handy. I grew up during the BBS era with some creative and somewhat mischievous friends. I’ve learned to be extremely cautious with regard to my online life! So, I did what you would expect…I sent them a nice reply that said “Go screw yourself.” For the past couple of days someone has been trying to call me and I assumed it was the same prankster trying to get the last four digits of my card. The last caller left a message indicating that they were from American Express and they wanted to talk to me about my card. After looking up their customer service numbers on the www.americanexpress.com web site, I called and was put through to the fraud detection group. The rep explained that there were some charges on my wife’s card that did not fit our purchase profile. She went through each charge and, for the most part, they looked like charges my wife may have made. My wife had asked to use the card for some Christmas shopping during the same timeframe as the charges. The American Express rep very politely explained that these looked out of character to her. She continued through the charges. She listed a charge for $160 – at this point my adrenaline started kicking in. My wife said she was going to charge about $25 or $30 dollars, not $160. Next, the rep listed a charge for over $1200. Uh oh!! Now I know that my account has been compromised. I informed the rep that we definitely did not make those charges. She replied with, “that’s ok Mr Pope, we declined those charges as well as some others.” We went through the pending charges and there were a couple more that were questionable. The rep very patiently waited while I called my wife on my office phone to verify the charges. Sure enough, my wife had not ordered anything from Netflix or purchased anything with Yahoo Wallet! “No problem Mr Pope, we will remove those charges as well.” “We are going to cancel your wife’s card and send her a new one. She will receive it by 7pm tomorrow via Federal Express. Please watch your statements over the next couple of months. If you notice anything fishy, give us a call and we will take care of it for you.” (Wow, I’m thinking to myself!) “Is there anything else I can help you with Mr Pope?” “Nope, thank you very much for catching this so early and declining those charges!”, I said smiling. Apparently she could hear me smiling on the other end of the phone line because she replied with “keep smiling Mr Pope and have a good rest of your week.” Now THAT’s customer service!  Thank you American Express!!! I shall remain an ever faithful customer. Interesting…

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >