Search Results

Search found 2279 results on 92 pages for 'cable clutter'.

Page 10/92 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• How do you organise the cables in your racks?

  - by Tim

  I'm migrating my current half-size rack to a full-size rack and want to take the opportunity to reorganize and sort our spaghetti-hell of ethernet cables. What system do you use for organising your cables? Do you use any tracking software? Do you physically label the cables? What are you identifying when you label each end? Mac address? Port number? Asset number? What do you use to label them? I was looking at a hand held labeler, but the wrap around laser printer sheets might work. The Brady ID PAL seems good, but it's pricey. Ideas?

  Read the article

• Mini DisplayPort to DVI-D Dual Link up to 2560 * 1600

  - by Steinway Wu

  I have a ThinkPad T530 with Mini DP++ and NVS 5400M, which are said to support 2560 * 1600 resolution. The display is Dell 3007WFP, which also supports 2560 * 1600. But, I have never seen any cables or adapters that can connect them with full support to 2560 * 1600. Do you have any idea? THANK YOU! In addition, I found that mDP++ means I can use a passive adapter. No need for active adapter which is much more expensive. This is the only one that meets my needs, but it is not sold in the US. And this one seems to be OK, but I am not sure because it says "2.5 Gbps per channel", which may not be enough.

  Read the article

• Configuring home wireless network

  - by dvanaria

  I'm new to setting up a home wireless network. I have Comcast tv/internet/phone service (modem included) as well as a wireless router. My question is pretty basic. How can I tell the performance of the following parts of the network? 1. incoming internet speed 2. speed of the modem 3. speed of the wireless router I basically want as fast an internet connection as possible, of course, but I'm not sure where to look for the bottleneck (and so, not sure where I can spend some money to speed things up). Right now I'm getting about 36 Mbps (as it shows in Windows). If I run an online speed test (xfinity has one) it shows Average download speed of 14.91 Mbps and Average upload speed of 5.72 Mbps. Thanks for your help.

  Read the article

• 3.5 mm component video jack -> Ipod female connection?

  - by Jigs

  At my gym the treadmills all have ipod male cables hanging out of them so that you can plug in a video ipod and play a video directly to the screen on the treadmill. I own a non apple MP4 player is there an adapter that will go from a 3.5mm component video jack to a female ipod connector that will allow me to watch a film on the screen?

  Read the article

• How to set up DHCP-configured access through a Linux box?

  - by marcusw

  I would like an old desktop box to use my laptop as a router to access the internet. Here is my setup: I have one ethernet port in the side of my laptop which I want to use to get internet access to my desktop computer. The laptop is connected to the LAN via a wireless link. Both systems run Linux. The desktop autoconfigures itself using DHCP. The laptop is a Kubuntu system. I do not have any crossover cables, though wireshark on the laptop sees the DHCP requests from the desktop just fine, so I doubt that I need one. What do I have to do to make this work?

  Read the article

• How to declutter and organize the cables on and under my desk?

  - by splattne

  Computer cables and external devices are a continuous source of frustration for everybody who likes a clean working environment. The more devices you add to your home office, the more disastrous the situation under the table becomes: cords falling behind the desk, ugly cables running along the sides and under of the desk, making it almost impossible to clean and remove the dust. This is not my office, but I've seen similar "setups:" I'm looking for good tips/products which help me in keeping the all cables somehow under control and organized. Thanks!

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Cables for building a computer

  - by Faken

  I'm looking at building a computer and I have already done a whole bunch of research the topic and I think I know what I'm doing. My question is where do all the cables required for connecting everything come from? I'm pretty sure that the cables required come from their respective components (power connectors from the power supply, assorted cables from the motherboard, ect). However nowhere have I seen it explicitly stated that the cables come with the component I am buying. Just to confirm, if I buy all the components needed for a basic computer (CPU, motherboard, power supply, case, ram, video card, hard drive) from a website, say newegg, will I have all the screws, cables,connectors, and components to put together a working computer or will I need to buy some cables somewhere?

  Read the article

• 3.5mm Headphone and Mic --> 3.5mm Headphone and 3.5mm Mic

  - by Taylor Price

  I am looking for a way to take the plug from a ear bud and mic set (e.g. the VModa Vibe Duo) and split it into separate headphone and mic 3.5mm plugs so that I can plug into my computer. Has anybody seen such a splitter? (Yes, I have done some quick searching for it) Thanks in advance. The reason why if you care to read this far is that I work from home and long conference calls with a big set of over-the-hear headphones can get tiring. Thus, I'd like to try with a nice ear bud/mic set and see if that is more comfortable.

  Read the article

• Annex-A vs Annex-B ADSL splitters

  - by Odys

  While trying to improve our Adsl connection, I found that we use a splitter that is from an unknown ventor and have no clue whether is for AnnexA (PSTN) or AnnexB (ISDN) line. Is it possible that somebody used the wrong splitter and just because it connected nobody ever cared? We have an ISDN line but the splitter used is blank. I am not really sure if it is AnnexB. Would it be possible to use an AnnexA filter over an ISDN line (even with that much signal loss)? (I am posting here because this is about our connection to the rack, I'm not sure if there is a more proper SExchange site)

  Read the article

• Do 10m external SAS cables work?

  - by Joachim Sauer

  According to the Wikipedia page external SAS cables are specified for up to 10m length. However, I found it pretty hard to actually find places that sell cables of that length. This made me wonder: Are there any known problems with using cables that are as long as this? Will it be more fragile? Slower? And if 10m is not suggested, would 6m be any more stable? A little background: for several reasons we'd like to put a tape library physically separate from our main server and 10m would be enough to put it on a separate floor.

  Read the article

• How can I add a DB9 serial port to a laptop?

  - by Axxmasterr

  I have a device I need a 9 pin serial port to configure. How can I add this capability to my laptop?

  Read the article

• Computer cables explained

  - by Robert English

  I've noticed lately that places to learn about both power supply cables and also peripherals and fans aren't that easy to find. There's very little information available that gives detailed explanations of what cables are used inside a computer. What I found was very dated and often lacked detailed explanations. For someone planning out their first build it would be great way for this to be explained all in one place, like here! Important things to know about cables and connections in a computer? What are their names? Where do they connect to and why? What typical Voltages do they output? Changing Voltages for Overclocking? Please refernce PSU cables(Full modular, Modular and Non-Modular,24-pin, 20+4-pin etc), SATA(I, II, III), Molex etc. EDIT: Forgot to mention any information about PSU rails would also be appreciated :)

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Building a network at home, what cables to use (if any)?

  - by Faruz

  My house is currently in ruins and am building it. While doing so, I wanted to design a home network. My main objectives are surfing and HD streaming. The house is one-level, 100 sq/m (about 300 sq/ft), and one of the rooms is a safety room with Reinforced concrete walls. About a year ago, when I started planning, I thought about putting Cat 6 STP cables in the walls and create network points in the rooms. Should I use STP or FTP? I heard that STP is a problem regarding connectors and stuff. Is it really beneficial? Will it work OK if I transfer the wire together with the telephone line? Should I maybe go with WLan and count on 802.11n to enable me to stream HD across the house? is 802.11n that good?

  Read the article

• How to declutter and organize the cables on and under my desk? [closed]

  - by splattne

  Computer cables and external devices are a continuous source of frustration for everybody who likes a clean working environment. The more devices you add to your home office, the more disastrous the situation under the table becomes: cords falling behind the desk, ugly cables running along the sides and under of the desk, making it almost impossible to clean and remove the dust. This is not my office, but I've seen similar "setups:" I'm looking for good tips/products which help me in keeping the all cables somehow under control and organized.

  Read the article

• New to networking had to reinstall xp what does blank in Default Gateway mean?

  - by waterfallraini

  I have reinstalled windows xp and posted about not being able to connect to the Interenet. I did go and ensure all drivers are there and now when I type ipconfig/all I get physical address, dhcp enabled, autoconfiguration enabled, autoconfiguration Ip address, subnet mask and then a line that says default gateway where default gateway is the only line with no numbers or anything next to it. My wireless connection works but how can I get this ethernet connection to work. This was working prior to this fresh reinstall.

  Read the article

• Is it possible for a router to "go bad" with time?

  - by JQAn

  I've been having problems with my internet connection over the past weeks (intermittent disconnections, slow transfers, etc), and my provider keeps telling me that the problem is not on their end. I have cablemodem with a wifi router (this router was not provided by them). The router is quite old (DIR-300), so I'm starting to wonder if it could be the issue and if I should replace it. Is it possible that it is the cause? Can they become so outdated that they cause intermittent interruptions of service? If I reset the modem and the router, they work fine for a few hours, but the problems starts again after a while.

  Read the article

• Why does just splitting an Ethernet cable not work?

  - by Sin Jeong-hun

  I thought the Ethernet is logically a one-line communication bus (for argument's sake, I am excluding hubs). All machines attached on the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why would splitting one Ethernet line from my home router into two and connecting two computers not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room, and I had put a computer in another room (also my room, though). Since a wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

  Read the article

• Possible to do cable & wireless syncing with Blackberry Enterprise Server?

  - by norova

  Using Blackberry Enterprise Server, is there a way to sync both wirelessly and via the sync cable? As in, can you make contacts sync via the cable and then the calendar and email sync wirelessly? Additionally, if you can sync contacts locally with the usb cable, can you sync both your regular outlook contact list and a Public Contact list without using a 3rd party application?

  Read the article

• Intel video driver upgrade now makes my external monitor display red-only with HDMI cable.

  - by Eli

  I have an HP G60 notebook with a Mobile Intel 4 Series Express Chipset video display (Driver version is 8.15.10.2021). OS is Win7 Home Premium. I also have an LG widescreen display that I was connecting to the laptop using an HDMI cable. It was working great, until I applied an Intel 4 Series Express Chipset update from Windows Update. After the update, if I plug the laptop to the monitor using the HDMI cable, it appears I only get the Magenta channel, cause that is all I see. If I connect with the VGA cable, it works fine. So, is it possible it is just the HDMI cable (which IS cheap in this case - fire sale at Blockbuster), and not related to the video driver update at all?

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• Why just splitting an Ethernet cable does not work?

  - by Sin Jeong-hun

  I thought the Ethernet is logically one-line communication bus (for argument's sake, I am excluding hubs). All machines attached in the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why splitting one Ethernet line from my home router into two and connecting two computers would not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room and I had put a computer in another room (also my room, though). Since wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

  Read the article

• How can a Virtualbox host connect to a guest VM when host wireless is disabled / host Ethernet cable is unplugged?

  - by uloBasEI

  I have a Virtualbox VM running on a computer connected to Internet via an Ethernet cable. The guest has a network adapter attached to a NAT. 2 ports (22 and 80) are forwarded so that the host can access them respectively on localhost:2222 and localhost:8080. When the Ethernet cable is plugged, both machine (host and guest) can access Internet and the host can access the SSH server/Webserver which ports are forwarded. When I unplug the Ethernet cable from the host, the host can not access the SSH server/Webserver of the guest anymore. Same situation with a Laptop connected to Internet via wireless when I disable the wireless adapter or set a wrong WPA key. My question is: is there a workaround for the host to access the guest services even if its Ethernet cable is unplugged / wireless is not available?

  Read the article

• Will installing an Ultra ATA cable backwards affect performance?

  - by GMMan

  I've recently purchased a hard drive upgrade for my Xbox 320GB WD Caviar Blue WD3200AAJB and StarTech.com Ultra ATA/66/100/133 cable IDE66 yes I'm crazy When it came to installing the cable, it was too short (my fault), and there wasn't enough space between the master and slave ends to reach both the DVD drive and the hard drive. The only thing I could do was install the cable backwards and twisting it quite a bit to make it fit. The upgrade works, but reading the manual for the hard drive I replaced (10GB Seagate U Series 5), apparently there is a specific way you have to connect the cable. I don't have that option, so the question comes down to, will my drive performance be at Ultra ATA levels, or is it still performing at original ATA speeds? Is there any way I can test this (benchmarking software for Xbox)?

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >