Search Results

Search found 1441 results on 58 pages for 'troubleshooting'.

Page 12/58 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Dlink DIR-615 suddenly stops working - Orange internet light

    - by zm15
    I unplugged my Dlink DIR-615 router last night from the wall due to a storm rolling in. I've done this countless times, no problem. However, when I went to plug it in and use the internet today, nothing. Check everything, cycled everything. Hard reset the router, nothing. The little globe on the front is red/orange, and it should be green. Windows gives me an error of a "DNS Issue", and the internet works when connected directly to the modem. How can I fix this issue? Why would it suddenly stop working?

    Read the article

  • Nvidia GTS 360M in Asus laptop shuts off when gaming on external display

    - by mr odus
    I have had this problem on my Asus G51j Intel I5, Nvidia GTS360M graphics card. Just updated the drivers to latest off Nvidias site. Most games I play, If I hook it up through an external monitor(this happens whether it's HDMI or VGA). The laptop hard shuts down after about 20 minutes, give or take. This tends to happen on more graphically intense games like Call of dutys, bioshock. I'm running Windows 7, latest nvidia drivers. Games work fine on my laptops screen, and Movies, general computing work fine on the external displays. The laptop always sits on a cooling pad and the latest time was in front of my AC unit, I ran heatfan or whatever the heat tracking software was, and my temperatures were normal through a shut down. This has been happening for the life of the laptop. I dont play very many games, and even fewer on an external monitor, so this issue doesnt come up much Is it possible I have a faulty graphics card? Is there anything else I can try?

    Read the article

  • Connection Issue

    - by Karl Schneider
    Desktop computer, connected directly into a Comcast modem. Every so often, at seemingly random intervals, my connection will drop. This could be while in the middle of browsing, or when I'm not even at the computer. When the connection drops, the modem still shows 4 green lights. The modem is connected to a splitter (cable and internet in same room), and then directly to the wall. To recover from the problem, I am forced to restart my computer, at which point everything works fine again. I have tried an ipconfig/release and renew, it tells me that it is unable to contact the DHCP server, and thus can't renew. I have updated the NICs driver, no luck. I have changed the ethernet cord, no luck. I have had Comcast replace the modem, no luck. The only thing I can think of that hasn't been replaced is the cords connecting the modem to the wall and the splitter. Can anyone think of anything else I may be able to do to isolate what's causing the issue?

    Read the article

  • "Show hidden files" option is not working

    - by crazygamer
    OK, I know this is the very basic thing that goes with Windows, but I am asking it here in search of answer. I put my pendrive and it autoruns. This changed the show hidden files option off, I mean I am not able to see my hidden files as it is not applying the changes. What is the registry file that has modified? I have scanned my computer using 4 antivirus programs. BitDefender found and deleted something in temperary folder. The rest didn't showed anything. I have encountered this problem a few more times but this time I don't want to format it ;-)

    Read the article

  • How to restore broken Ethernet functionality on Mac G5 running Mac OS 10.4.11 (Tiger)

    - by willc2
    I had a disk error that rendered my Mac unbootable. I repaired it with Tech Tool 4, but now networking does not work. Network Preferences reports that my Ethernet cable is unplugged. I know this is bogus because when I boot from an emergency partition, networking works correctly. Furthermore, wireless networking is also broken, which I tested with a known-good Wi-Fi dongle. Whenever I try to change Network Port Configurations by creating a New or Renaming an existing one, example: I get this message in the console: Error - PortScanner - setDevice, device == nil! Error - PortScanner - setDevice, device == nil! In sets of two as shown. When I try to invoke the Network Diagnostics app, it immediately crashes. My first thought is to reinstall Tiger with the Archive and Install method so I don't have to reinstall all my applications but I have lost my Tiger installer disk. My next thought is to buy Leopard for $107 on Amazon. If there is any way I can just repair my Tiger install I would be happy to save that money, though. This is not my main machine and I am loathe to put more money into it. How can I recover my network functionality? UPDATE: I found my Tiger install disk and tried an Archive and Install. It failed with an unhelpful error message along the lines of "Can't install, try again". I tried again but had the same error. My guess is, some corrupt or missing file in my User folder is preventing migration. I have a backup created with Super Duper that is a bit out of date but will startup the machine (with functional networking). I would love to just copy over the file(s) that got messed up but I don't even know where to look. What is the likely location of the System files that would cause the aforementioned symptoms?

    Read the article

  • Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

    - by David Osborn
    I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

    Read the article

  • Cannot activate windows 7

    - by Charlie
    I can't activate Windows 7, I get an error saying DNS name does not exist. Is something configured incorrectly somewhere? PS: I need the answer within 13 days ;) UPDATE: I had upgraded from my company's Windows Vista build, and when I connect to the company VPN and activate I get a different error: The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information. The Application Event Log contains this (I took out the server name, it's one of the company servers): The client has sent an activation request to the key management service machine. Info: 0xC004F042, 0x00000000, xxxxxxxxxxxxxxxxxxxxxxxxx.com:1688, 7fbdc9b7-d654-49ed-80a7-81a34408f8dc, 2009/09/01 10:59, 0, 2, 17880, ae2ee509-1b34-41c0-acb7-6d4650168915, 25

    Read the article

  • Windows 7 CRC Error When Installing Fallout 3 [closed]

    - by c00lryguy
    Earlier today, I installed Fallout 3 on Windows XP perfectly fine. Then about 2 hours ago I installed Windows 7 and I would like to install Fallout 3. But, when I try to install Fallout 3 on Win 7, I get an error while in the middle of the install: CRC Error: The File C:\Program Files\Bethesda Softworks\Fallout 3\Data\Video\B03.bik doesn't match the file in the setup's.cab file I forget the filename but it is the same each time I install. The disk literally went from the DVD-Rom to the case after the first install and straight from the case to the DVD-Rom. It's in perfect condition. My DVD-Rom is only about 2 months old and I've never had any problems with it. I don't understand what's going on. My user that I'm installing the game with is set as Administrator, as well.

    Read the article

  • Windows minimizing automatically.

    - by Gage cook
    My computer (running xp sp3) keeps minimizing windows or deselecting them automatically. It's so bad that I can't do anything before the windows close. (typing this on my phone) and no, I'm not prssing alt tab, I'm not touching anything when it happens. Had anybody else had this problem? And if so how did you fix it? Please help my pc is completely unusable because of this.

    Read the article

  • Her microphone produces white noise, after a while?

    - by Wolfpack'08
    When my friend Skypes with me or gets on FB Video with me, her sound works fine... at first. After a bit, it starts sounding like loud static. It happens more frequently as we restart video chats, until it happens as soon as we open video chats. We usually restart her PC to fix the issue. Is there a process we could kill, maybe? Skip that question, if you will, and jump to these two: How do we fix this? Why is this happening?

    Read the article

  • Problem with Skype in Snow Leopard

    - by Am1rr3zA
    Ever since I upgraded my MacBook Pro from Leopard to Snow Leopard I have always had problems with Skype. When I start a video chat, Skype tells me that my camera is not installed on the machine (even though it clearly is). After searching the internet I have found some 'solutions' but none of them work. After trying them, it makes my camera feed appear as a blank, green image. How can I get Skype to function with the built in iSight with Snow Leopard properly? is there any body else face this problem?

    Read the article

  • Down for everyone or just me?

    - by Click Ok
    When I try access a website, and it is down, I head to http://www.downforeveryoneorjustme.com, and test it. But lately, my home network PCs cannot access facebook.com, and I tried the that service and the answer was: It's just you. http://facebook.com is up. Ok, that got me. I tried several browsers and 3 PCs in my LAN and it don't works. I don't know how to troubleshoot this. What some step-by-step to troubleshoot that problem? Output from ping command: Disparando facebook.com [69.171.234.21] com 32 bytes de dados: Resposta de 69.171.234.21: bytes=32 tempo=256ms TTL=245 Resposta de 69.171.234.21: bytes=32 tempo=255ms TTL=246 Resposta de 69.171.234.21: bytes=32 tempo=251ms TTL=245 Resposta de 69.171.234.21: bytes=32 tempo=255ms TTL=246 PS.: I thank you for the nice help, but then I suppose that the first step of a step-by-step to troubleshoot is ping from command line?

    Read the article

  • Sound stopped working on Toshiba Satelite C855

    - by Eric Wilson
    I have a Toshiba Satallite C855 running Windows 7 with a Realtek High Definition Audio card. Sound worked fine yesterday. Today, my two-year old did something to the machine, and I have no sound. I have adjusted sound through the icon in the lower right corner, and using the Fn keys. I have rebooted. I've verified that there are no external speakers plugged in to the laptop. It seems that this model does not have an external volume control. (If it does I can't find it.) Any ideas?

    Read the article

  • My EEEPc 900HA won't turn on/boot. Can it be fixed or does it need to be sent in?

    - by th3dude19
    My EEEPc 900HA stopped booting up out of nowhere. It went to sleep and when I went to wake it up, it wouldn't wake up. I powered down and went to power back up, but no go. The power light comes on solid and the battery/corded power light blinks consistently. There is no HDD activity or light activity. No BIOS. Just the lights described. I've troubleshooted the RAM, HDD, and internal power connections and everything checked out both on battery power and corded power. I've also reset the CMOS to no avail. What else can I do?

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • Vista gets stuck in an endless loop while booting

    - by Mason Wheeler
    I put my laptop to sleep last night, and when I woke up this morning... it didn't. So I tried to reboot, and everything went fine until it got to the Vista splash screen, where it's supposed to display the logon. Here, it hits an endless loop: Display the cursor with the blue spinny thing that replaced the hourglass, for 5-10 seconds Display "Please wait..." for about half a second Screen flashes to black, then quickly back to the Vista splash screen Goto step 1 The whole time, my hard LED is on almost non-stop. I can boot into Safe Mode... sometimes. Sometimes it'll load all the drivers, then sit there for about 10 minutes, spinning the hard drive non-stop, then reboot with no warning. I tried booting to Last Known Good Configuration. Didn't fix anything. When I've managed to get into Safe Mode, I tried running CHKDSK. Didn't fix anything. I tried running System Restore to each of my last two restore points. Didn't fix anything either time. I ran a virus scan. Didn't find anything. I tried calling the manufacturer (Alienware), only to discover that my warranty expired last freaking week and now I can't get it fixed without paying exorbitant sums of money. I'm about at my wits' end here. Has anyone seen this problem before? Does anyone know how to fix it? Does anyone know a solution that does not involve reinstalling the OS and losing an entire year's worth of program installations, Windows Updates and configuring and tweaking things until it's working just like I want it to?

    Read the article

  • Why my 2nd ip from traceroute is not answering the ping anymore?

    - by Pedro77
    My Internet is really laggy today, I did a tracerout and I realize that I'm having no answer from an ip at the beginning of the traceroute. see: Tracing route to 12.129.202.154 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.1 2 * * * Request timed out. 3 8 ms 8 ms 8 ms bd044008.virtua.com.br [189.4.64.8] 4 9 ms 8 ms 8 ms bd044009.virtua.com.br [189.4.64.9] 5 26 ms 26 ms 24 ms embratel-T0-1-5-0-tacc01.cas.embratel.net.br [200.174.243.21] 6 360 ms 15 ms 12 ms ebt-T0-15-0-12-tcore01.ctamc.embratel.net.br [200.244.140.218] 7 330 ms 349 ms 261 ms ebt-Bundle-POS11942-intl04.mianap.embratel.net.br [200.230.220.10] 8 139 ms 141 ms 139 ms sl-st30-mia-.sprintlink.net [144.223.64.221] Connection diagram: PC - Router configured as access point - Router (192.168.0.1) - Cable modem (192.168.100.1). Well, I think it is odd that the 2nd ip is not returning the ping. I looked some old tracerout logs to see what was the 2nd ip. The ip was: 10.19.0.1 So, what this 2nd ip stand for? How can I find why it is not answering the ping? I don't understand it, if does not answer the ping, how can the packets continue (yeah newbie question)? edit: well, because the hope 3 have a ping of 8 ms the hop 2 request time out should really not be a problem. But it is still odd that the 2nd hop stopped to answer ping request. So my doubts are: 1. Were the ip 10.19.0.1 is from? 2. Why it stopped to answer ping requests? 3. How can hop 7 be smaller than 6 and 8 smaller than 7 and 6!?? Shouldn't the pings be higher for each hop? Like: hop 3 time should be the sum of the hops before it plus its own time (hop 3 = 1+2+3) ??

    Read the article

  • Diagnosing SAN connectivity issues (RHEL5)

    - by Matthew
    We are currently utilizing GFS2 to share a SAN LUN between 3 servers. However due to a feature problem with vendor software we are using, we currently have the volume unmounted on two of the boxes, and are instead exporting the GFS2 filesystem via NFS from the first one (the software requires some weird locking mechanics that GFS2 doesn't support). As of this morning, NFS was no longer able to read/write to the volume from any of the servers, including the NFS server. I then tried checking the normal mount (the directory that is exported on the NFS server) and I received a weird input/output error just trying to CD into it. When I tried running multipath, I got a DM error, however multipath -l worked just fine. I tried unmounting the GFS2 volume, and the CLI hung. I ran init 0 which killed most services, but then the shutdown appeared to have been hung. I logged in via out of band access (hp ILO) and saw that the shutdown was hung trying to unmount GFS2 volumes. My main priority was getting the box back online so after about 5 minutes of waiting I did a hard reset. I am now trying to figure out what went wrong. What are the correct logs to investigate? I've never run into SAN issues like this before. The SAN is connected via 2 fibre connections. Any help would really be appreciated. Everything appears to be up and functional now.

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • Can't create a valid symlink under VMWare HGFS

    - by Alexander Gladysh
    Host: OS X 10.6.5 VMWare Fusion: 3.1.2 Guest: Ubuntu x86 10.10 $ uname -a Linux ubuntu 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux I can not create a symlink, readable from the Guest OS anywhere in the directory, mounted with hgfs: /mnt/hgfs/projects/tmp$ touch aaa /mnt/hgfs/projects/tmp$ ln -s aaa bbb /mnt/hgfs/projects/tmp$ less bbb bbb: No such file or directory /mnt/hgfs/projects/tmp$ ls -la total 6 drwxr-xr-x 1 501 users 136 2010-12-28 18:12 . drwxr-xr-x 1 501 users 8602 2010-12-28 18:12 .. -rw-r--r-- 1 501 users 0 2010-12-28 18:12 aaa lrwxr-xr-x 1 501 users 3 2010-12-28 18:12 bbb - aaa /mnt/hgfs/projects/tmp$ readlink bbb aaa The same symlink is perfectly accessible in OS X host. Is there a workaround for this?

    Read the article

  • Random BSODs on Win7 boot. Can't find a valid reason.

    - by 0plus1
    Hi, I bought and assembled a new pc: ASUS m4a785td-v EVO AMD x4 620 OCZ Black Edition 2x 2gb WD 500gb sata Win7 Ultimate 64bit fresh install BSOD on boot. Formatted, reinstalled, BSOD on install. Ran memtest - no errors. Ran Win7 install in safe mode. Installed, random BSOD on win7 startup, even in safe mode. Updated BIOS. Ran the win7 memtest (no error), booted after some tries and ran Prime95 blend test for 12 hours straight with no errors at all! When the pc has booted, win7 runs as smooth as possible, I've been playing STALKER for 4 hours straight with not a single hiccup. Using Blue Screen View I can see that every BSOD involves: ntoskrnl.exe Here are the dumps Any help would be greatly appreciated, this thing is driving me crazy.

    Read the article

  • Bizarre and very specific Internet connection loss

    - by Synetech
    Yesterday (Friday, September 21, 2012), my Internet connection started acting up. After some testing, I confirmed a very specific and baffling set of symptoms: Internet connection goes away every 25-35 minutes (I did not confirm the exact interval, but it seems to be about 30 mins.) Only some protocols are affected; HTTP*, P2P, etc. stop working; FTP, etc. continue to work When it’s stopped, cannot even ping router or cable-modem IPs or view their firmware pages Domain-names and IPs are irrelevant (for protocols that stop working, neither work, for those that still work, both work) Resetting router fixes it for another 30 minutes Keeping the connection idle or active doesn’t seem to make a difference (nor the bandwidth usage in that period) Connecting directly to cable-modem allows it to work indefinitely Disconnecting the router from the cable-modem works indefinitely (no Internet connection obviously, but can still access router IP and firmware page) Connecting the router to the cable-modem, but putting the modem on standby also works indefinitely Same problem with both a wireless laptop and wired (on any port) desktop (both Windows 7; will try to test Windows XP when possible) Nothing had changed in the days leading up to the issue. No modifications to the networking configuration or the router; there were not even any Windows updates except for an MSSE definition update. Waiting does not fix it, nor does any amount of fiddling with anything; only resetting the router fixes it for 30 minutes (resetting the cable-modem doesn't work either) I tried cleaning the pins in the router’s plugs, but that didn’t help, which was not really a surprise since I was not getting a lost connection error. Obviously my first thought was that the router was having a problem, and this is borne out by some tests. The problem is that when it drops, it is not a full drop since I can still do things like ftp ftp.mcafee.com and such which means that the connection and DNS are still working. Moreover, if it were the router, then why does it stay alive indefinitely when not connected to the cable-modem (i.e., no outside influence)? The problem doesn't seem to be either the cable-modem nor the router, but rather an interaction between the two, like something from the outside (port scan? hacker? ISP?) that is triggering a problem in the router. I see that there have been a couple of vulnerabilities for the DI-524, but those were a while back and should be fixed since I have the last firmware for it. I don’t think it’s my ISP (Rogers) since I have been using the router for several years without problem and can connect indefinitely when bypassing it. But I can’t rule them out since that is one of the only possible things that could have suddenly changed. Does anybody have any ideas of explanations, fixed, or tests? (I note that when I opened the router, I heard a very high-pitched noise from somewhere near the capacitors/ferrite ring which I don’t think I heard the last time I opened it a few years ago, but then if it were that, then why would it affect only a very small, specific set of functions?)

    Read the article

  • How to restore jump list for Windows Explorer pinned taskbar icon?

    - by Dario Solera
    I pinned Windows Explorer's icon to my taskbar months ago, and all worked fine, including jump lists. Note: I changed the default Explorer's folder using the usual trick of changing the GUID in the shortcut. Now, all of a sudden, the jump list is empty, and dropping folders on the pinned icon does not produce any effect, nor recently-opened folders show up in the list (although in the taskbar options I made sure to have it remember recently open items). How can I restore the original functionality, given that all other pinned applications jump lists work correctly? I'm running Windows 7 Ultimate x64, updated with the latest patches. The OS is in US English and my locale is Italian-Italy.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >