Search Results

Search found 14484 results on 580 pages for 'window opener'.

Page 123/580 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

  • FreeBSD 8.1 unstable network connection

    - by frankcheong
    I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

    Read the article

  • NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

    - by Corey Kennedy
    What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help!

    Read the article

  • Pointer position way off in Java Application menu's when using gnome-shell

    - by Hailwood
    When using any java application in gnome-shell if the window is maximised the pointer position is way off; but only on the menu's, in the editor, or the side panel, the pointer is fine. This only presents itself when the window is maximized, and it seems that the further away from 0x0 the window is when you maximise it, the bigger the pointer offset. From what I have gathered it has to do with the window not updating it's size when it gets maximised. The other issue is that when a gnome-shell notification appears, when clicking on it, I lose the ability to type in the editor, I can select text etc, but can't give it focus to type. I must bring up some other text input (e.g. right click on a file on the left, select rename, which brings up a rename dialog) after that I can type in the editor again. So, how can I fix this? Below is as much information as I can think to provide $ gnome-shell --version GNOME Shell 3.6.1 $ java -version java version "1.7.0_09" Java(TM) SE Runtime Environment (build 1.7.0_09-b05) Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode) $ file /etc/alternatives/java /etc/alternatives/javac /etc/alternatives/java: symbolic link to '/usr/lib/jvm/java-7-oracle/jre/bin/java' /etc/alternatives/javac: symbolic link to '/usr/lib/jvm/java-7-oracle/bin/javac'

    Read the article

  • Photoshop CS4 - PSD files - cant see the contents

    - by Rob
    I am opening up a photoshop psd file in CS4 to edit. When I open the file, the window shows just a grey background and no content. If I click/drag the window, then I CAN see the contents, but when I drop the window, it goes back to a grey background. Any suggestions. (Yes, I'm a PhotoShop noob ...) Thanks

    Read the article

  • TCP Tweaking options and Results: Any suggestions?

    - by krishnakumar
    I first tried with the default windows XP TCP option(It doesn't have TCPWindowSize option and TCP1323 in its Registry setting). I dynamically set those options using TCP optimizer. Here I list out the result with and without TCP Tweaking option. I see no major improvements in TCP after increasing window size optimally too. What value should I set to increase the performance? Results: Without any window size and MTU setting from server to client (receiving) TCPWindowSize : MTU : TTL: Size:586 MB total duration : 03:47 With window size extension from server to client (receiving) Bandwidth :100 Mbps Latency: 100ms BDP :1250000 TCPWindowSize : 1250000 MTU :1500 TTL:128 Size:586MB total duration : 03:44 With window size extension from server to client (receiving) TCPWindowSize :64240 MTU :1500 TTL :112 Size: 586MB total duration : 03:49

    Read the article

  • help installing some java and flash

    - by william
    ok so i have git now and some other stuff but ive looked around and all and i dont get very help full info Instructions 1 Download the latest version of Flash Player from the Adobe Website. Click on "Download the Latest Player," and choose ".deb for Ubuntu" from the drop down list. 2 Choose "Save File" from the pop up window. Sponsored Links Google Cloud Hosting Build And Run Your App Using Google App Engine cloud.google.com/appengine 3 Open a terminal window. The terminal window will be found under Applications - Utilities. 4 Change to the directory where your downloaded file was saved. cd Download 5 Install the libcurl3 library. sudo apt-get install libcurl3 6 Install the Flash Player. sudo dpkg --install install_flash_player__linux.deb Replace with the latest version number. 7 Restart Firefox. 8 Check that Flash Player was installed. Type about:plugins in a browser window, and look for the flash player MIME type. Read more: http://www.ehow.com/how_5068467_install-flash-player-ubuntu.html#ixzz2ixPj47qS what i dont is how the heck i change the directory and all that crap witch they say every one know

    Read the article

  • NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

    - by Corey Kennedy
    What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help! edit: 1/19/2011 Well, this is truly bizarre. To my knowledge I've made no changes to either system - the laptop or the server. But today after starting up the server for the first time in a few days, and making sure that nxserver was running, I was able to connect with the nxclient from my laptop with no problems. I have a full desktop in a single window and I am able to interact with it normally. This is really weird, but the problem seems to be resolved.

    Read the article

  • Cisco VPN and .pcf file

    - by yael
    I have few of profiles .pcf files , and I used them in order to automate the vpmclient connection VIA CLI command I have WIN XP server for example vpmclient connect "customor_alpha" until now everything is ok but I have problem with the last of my profiles - area1.pcf the problem is when I type in CMD window the following ( to create VPN connection ) vpmclient connect "area1" after 2 second CISCO window will pop up and ask for password , ( username already defined in window ) please advice what could be the problem , why I get the "CISCO PVN window" ? or maybe I have some in correct syntax in my .pcf file , I checked the .pcf file again and again and I couldn't find the problem ? example of area1.pcf ( only example - not my real pcf ) [main] Description=connection to TechPubs server Host=10.10.99.30 AuthType=1 GroupName=docusers GroupPwd= enc_GroupPwd=158E47893BDCD398BF863675204775622C49<SNIPPED> EnableISPConnect=0 ISPConnectType=0 ISPConnect= ISPCommand= Username=alice SaveUserPassword=0 UserPassword= enc_UserPassword= NTDomain= EnableBackup=1 BackupServer=Engineering1, Engineering2, Engineering 3, Engineering4 EnableMSLogon=0 MSLogonType=0 EnableNat=1 EnableLocalLAN=0 TunnelingMode=0 TCPTunnelingPort=10000 CertStore=0 CertName= CertPath= CertSubjectName SendCertChain=0 VerifyCertDN=CN=”ID Cert”,OU*”Cisco”,ISSUER-CN!=”Entrust”,ISSURE-OU!*”wonderland” DHGroup=2 PeerTimeOut=90 ForceNetLogin=

    Read the article

  • Positioning a sprite in XNA: Use ClientBounds or BackBuffer?

    - by Martin Andersson
    I'm reading a book called "Learning XNA 4.0" written by Aaron Reed. Throughout most of the chapters, whenever he calculates the position of a sprite to use in his call to SpriteBatch.Draw, he uses Window.ClientBounds.Width and Window.ClientBounds.Height. But then all of a sudden, on page 108, he uses PresentationParameters.BackBufferWidth and PresentationParameters.BackBufferHeight instead. I think I understand what the Back Buffer and the Client Bounds are and the difference between those two (or perhaps not?). But I'm mighty confused about when I should use one or the other when it comes to positioning sprites. The author uses for the most part Client Bounds both for checking whenever a moving sprite is of the screen and to find a spawn point for new sprites. However, he seems to make two exceptions from this pattern in his book. The first time is when he wants some animated sprites to "move in" and cross the screen from one side to another (page 108 as mentioned). The second and last time is when he positions a texture to work as a button in the lower right corner of a Windows Phone 7 screen (page 379). Anyone got an idea? I shall provide some context if it is of any help. Here's how he usually calls SpriteBatch.Draw (code example from where he positions a sprite in the middle of the screen [page 35]): spriteBatch.Draw(texture, new Vector2( (Window.ClientBounds.Width / 2) - (texture.Width / 2), (Window.ClientBounds.Height / 2) - (texture.Height / 2)), null, Color.White, 0, Vector2.Zero, 1, SpriteEffects.None, 0); And here is the first case of four possible in a switch statement that will set the position of soon to be spawned moving sprites, this position will later be used in the SpriteBatch.Draw call (page 108): // Randomly choose which side of the screen to place enemy, // then randomly create a position along that side of the screen // and randomly choose a speed for the enemy switch (((Game1)Game).rnd.Next(4)) { case 0: // LEFT to RIGHT position = new Vector2( -frameSize.X, ((Game1)Game).rnd.Next(0, Game.GraphicsDevice.PresentationParameters.BackBufferHeight - frameSize.Y)); speed = new Vector2(((Game1)Game).rnd.Next( enemyMinSpeed, enemyMaxSpeed), 0); break;

    Read the article

  • SFML - Moving a sprite on mouseclick

    - by Mike
    I want to be able to move a sprite from a current location to another based upon where the user clicks in the window. This is the code that I have: #include <SFML/Graphics.hpp> int main() { // Create the main window sf::RenderWindow App(sf::VideoMode(800, 600), "SFML window"); // Load a sprite to display sf::Texture Image; if (!Image.LoadFromFile("cb.bmp")) return EXIT_FAILURE; sf::Sprite Sprite(Image); // Define the spead of the sprite float spriteSpeed = 200.f; // Start the game loop while (App.IsOpened()) { if (sf::Keyboard::IsKeyPressed(sf::Keyboard::Escape)) App.Close(); if (sf::Mouse::IsButtonPressed(sf::Mouse::Right)) { Sprite.SetPosition(sf::Mouse::GetPosition(App).x, sf::Mouse::GetPosition(App).y); } // Clear screen App.Clear(); // Draw the sprite App.Draw(Sprite); // Update the window App.Display(); } return EXIT_SUCCESS; } But instead of just setting the position I want to use Sprite.Move() and gradually move the sprite from one position to another. The question is how? Later I plan on adding a node system into each map so I can use Dijkstra's algorithm, but I'll still need this for moving between nodes.

    Read the article

  • How do I check on non-transparent pixels in a bitmapdata?

    - by Opoe
    I'm still working on my window cleaning game from one of my previous questions I marked a contribution as my answer, but after all this time I can't get it to work and I have to many questions about this so I decided to ask some more about it. As a sequel on my mentioned previous question, my question to you is: How can I check whether or not a bitmapData contains non transparent pixels? Subquestion: Is this possible when the masked image is a movieclip? Shouldn't I use graphics instead? Information I have: A dirtywindow movieclip on the bottom layer and a clean window movieclip on layer 2(mc1) on the layer above. To hide the top layer(the dirty window) I assign a mask to it. Code // this creates a mask that hides the movieclip on top var mask_mc:MovieClip = new MovieClip(); addChild(mask_mc) //assign the mask to the movieclip it should 'cover' mc1.mask = mask_mc; With a brush(cursor) the player wipes of the dirt ( actualy setting the fill from the mask to transparent so the clean window appears) //add event listeners for the 'brush' brush_mc.addEventListener(MouseEvent.MOUSE_DOWN,brushDown); brush_mc.addEventListener(MouseEvent.MOUSE_UP,brushUp); //function to drag the brush over the mask function brushDown(dragging:MouseEvent):void{ dragging.currentTarget.startDrag(); MovieClip(dragging.currentTarget).addEventListener(Event.ENTER_FRAME,erase) ; mask_mc.graphics.moveTo(brush_mc.x,brush_mc.y); } //function to stop dragging the brush over the mask function brushUp(dragging:MouseEvent):void{ dragging.currentTarget.stopDrag(); MovieClip(dragging.currentTarget).removeEventListener(Event.ENTER_FRAME,erase); } //fill the mask with transparant pixels so the movieclip turns visible function erase(e:Event):void{ with(mask_mc.graphics){ beginFill(0x000000); drawRect(brush_mc.x,brush_mc.y,brush_mc.width,brush_mc.height); endFill(); } }

    Read the article

  • Microsoft Word 2007 restarts the installer upon exiting on Windows XP

    - by leeand00
    A user complained that they were having issues with MS Office 2007, and that the installation / configuration dialog kept appearing. I already tried uninstalling Office 2007 and I ended up needing to use the Microsoft Fix It package to uninstall it, since using the control panel failed. I close Microsoft Word. The Installer for Microsoft Office inexplicably opens. I then get a dialog that says I need to reboot. So I restart... Start Microsoft Word, Word starts up, and everything appears to be fine. I close word, and nothing much happens this is on the administrator account. I think everything is fixed so I call the user over to come try their account out. We login as the user, and the user tries to open a document in Word. The Configuration Progress Window reappears. It runs...and then Word appears. I close it and it appears to work, no window. I open it again and the Configuration Progress window appears yet again... Then Word opens up again, if I exit out and open up again I get the same Configuration Progress window. I have no idea what is causing the Configuration Progress Window to come up.. Update: I attempted to install two updates: Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687400) Update for the 2007 Microsoft Office System (KB967642) Both of these updates failed. Update: I attempted to install KB967642 manually and it failed.

    Read the article

  • Tip: Recording Non-Maximized Applications in UPK

    - by Marc Santosusso
    Have you ever wanted to record an application that would not maximize, or an application that would look strange maximized? Or perhaps your Windows Desktop has become cluttered with icons and you don't want to capture the clutter in your recordings. Here's a tip that will help: create a background for your recording. Create a blank HTML file with a black background in your favorite HTML editor. Or download this sample file: UPK_Recording_Background.html (right click to save). If you would prefer a different color background in the sample file, open it in Notepad and change “#000” to a different HTML color. Open UPK_Recording_Background.html in its own web browser window. Press F11 to make the web browser window full screen. This should give you a completely black screen. (This works great in modern versions of the most popular browsers. I successfully used Firefox 15, Chrome 22, and IE 9. Open or switch to the desired application so that it sits on top of the full screen browser window. If the application you are recording is also in a browser, it is important that it be in a separate browser window from the UPK_Recording_Background.html. Record your topic normally. The above steps create a recording background using an HTML file and a web browser. This is just one method, for instance you could do the same thing with an image editor and an image viewer with a full screen view. Now you can record a non-maximized application without a distracting background. I hope you find this to be a helpful tip. Let us know what you think in the comments.

    Read the article

  • Why nautilus quicklist is not working?

    - by jasmines
    None of my bookmarks (Documents, Pictures, Download, Dropbox, Ubuntu One, Music, Public) are correctly shown but they won't open if I right click on the Home icon and select them. The only ones who work are Home and Open A New Window. I've read similar questions (http://askubuntu.com/questions/184504/unity-home-quicklist-not-working-when-nautilus-is-closed and unity home quicklist not working) but my problem seems different... Anyway I can't solve with the suggested workarounds. $ ls ~ Audiobooks Dropbox Modelli Pubblici Video Backup dvdrip-data Musica Scaricati VirtualBox VMs deja-dup grive Pictures - GT-I9100 Scrivania virtual-drives Documenti Immagini Podcasts Ubuntu One Vuze Downloads $ cat /usr/share/applications/nautilus.desktop [Desktop Entry] Name=Files Comment=Access and organize files Exec=nautilus %U Icon=system-file-manager Terminal=false Type=Application StartupNotify=true OnlyShowIn=GNOME;Unity; Categories=GNOME;GTK;Utility;Core; MimeType=inode/directory;application/x-gnome-saved-search; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=nautilus X-GNOME-Bugzilla-Component=general X-GNOME-Bugzilla-Version=3.4.2 Actions=Window; X-Ubuntu-Gettext-Domain=nautilus [Desktop Action Window] Name=Open a New Window Exec=nautilus OnlyShowIn=Unity;

    Read the article

  • Failed to load session gnome-fallback, after messing with metacity

    - by Carlito
    I am using Ubuntu 12.04 with gnome-session-fallback (Gnome Classic in the login menu). I wanted to remove window borders from metacity and stumbled across this post which basically changes window->mwm_decorated from TRUE to FALSE, which should remove the window borders in metacity. I know that it is also possible to change your GTK theme to one without window borders, but I wanted to try this solution. So I downloaded the source from my current metacity version (2.34.1) and changed that row. After compiling (./configure && make) I ran checkinstall which generates a .deb file from the source (had to change the version a bit to match the current one exactly). But after installing and loging out and back in, I couldn't load Gnome Classic. I get the error Failed to load session gnome-fallback. I could reinstall the old metacity which was still saved in /var/cache/apt/archives/, so everything is back where it was before. But I would like to mess around with metacity. Have I installed it correctly or did I forgot something? Are there any log files that I should check for solving this error? Thanks in advance!

    Read the article

  • Win7 - Opening "Programs and Features" as Admin from command line (logged in as regular user)

    - by user1741264
    We have Win7 machines on a domain that we'd like to open the "Programs and Features" control applet via the command line while a regular user is logged in. Heres the catch: I know how to do this using runas from command line BUT after "Programs and Features" opens, I dont truly have the ability to remove a program. I am told that I need to be an Admin to do so. Here are the commands I have tried: runas /user:%computername%\administrator cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%computername%\administrator cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl I have also tried all of the above as one long line of code instead of launching a cmd.exe as Admin As you can see, I have tried running the command using both a local admin account (Administrator) AND a domain admin account. I have alos tried launching the runas command as one long command (opening the "programs and features") AND 1st launching a cmd.exe with admin rights and THEN launching the "Prgrams and Features" window. The result is the same: The "Programs and Features" windows opens but when I try to perform an uninstall, I am told I need Admin rights. Thus I am lead to believe that this instance of "Programs and Features" is not truly being run as an admin I am trying to avoid logging the regular user out. I am also aware that every program has its own uninstaller, I do not want to uninstall that way. I want to use the uninstaller in "Programs and Features". Any help is appreciated.

    Read the article

  • Inkscape: Copying an object, retaining transparency

    - by dpk
    I'm looking for a way to copy objects from one window to another without losing the surrounding transparency. I have two Inkscape windows. The setup is pretty simple. In the first window I draw a filled circle and a filled rectangle in it, with the circle set on top of the rectangle to show that the area around the circle is transparent (that is, you can see the rectangle "under" the circle, see screenshot 1, left). In the second window I just drew a filled rectangle (screenshot 1, right). When I copy the circle from window 1 to window 2 the transparency around the circle is lost (screenshot 2). I've verified that the backgrounds of the documents are 0% alpha/white. This is a rather contrived example but is readily reproducible. The real graphics I am working with have a bunch of objects all in a single group, but I have the same results. I feel like I'm missing something. The circle no longer behaves like a circle at its destination. Instead, it acts kind of like a bitmap. I'm definitely not using the bitmap copy feature.

    Read the article

  • How to deal with OpenGL and Fullscreen on OS X

    - by Armin Ronacher
    I do most of my development on OS X and for my current game project this is my target environment. However when I play games I play on Windows. As a windows gamer I am used to Alt+Tab switching from within the game to the last application that was open. On OS X I currently can't find either a game that supports that nor can I find a way to make it possible. My current project is based on SDL 1.3 and I can see that cmd+tab is a sequence that is sent directly to my application and not intercepted by the operating system. Now my first attempt was to hide the rendering window on cmd+tab which certainly works, but has the disadvantage that a hidden OpenGL window in SDL cannot be restored when the user tabs back to the application. First of all, there is no event fired for that or I can't find it, secondly the core problem is that when that application window is hidden, my game is still the active application, just that the window disappeared. That is incredible annoying. Any ideas how to approximate the windows / linux behavior for alt+tab?

    Read the article

  • Create a custom shortcut that types clipboard contents

    - by briankb
    I want to paste my clipboard contents to a remote session such as VNC, IPMI, or Raritan. To accomplish this, I installed xdotool and clip. Then I wrote a simple command that types the clipboard contents: xdotool type "$(xclip -o)" This works if I stay in a terminal window, and type that command myself. It types back my clipboard contents when I run the command. Of course now I want to make this into a hotkey that works in any window. However, if I create a custom shortcut using Keyboard settings, it doesn't work. If I assign a hotkey Alt+K to the shortcut, nothing happens when I press it. If I use Ctrl+K, unexpected behavior occurs to whatever window has focus. e.g. my terminal window size shrinks (it's somewhat amusing, actually). Similar results occur if I save it as a script and call the script, or if I encapsulate the command with sh -c. How can I make practical use of the powerful xdotool type command?

    Read the article

  • VS2012 Coded UI Test closes browser by default

    - by Tarun Arora
    *** Thanks to Steve St. Jean for asking this question and Shubhra Maji for answering this question on the ALM champs list *** 01 – Introduction The default behaviour of coded UI tests running in an Internet Explorer browser has changed between MTM 2010 and MTM 2012. When running a Coded UI test recorded in MTM 2012 or VS 2012 at the end of the test execution the instance of the browser is closed by default. 02 – Description Let’s take an example. As you can see the CloseDinnerNowWeb() method is commented out.  In VS 2010, upon running this test the browser would be left open after the test execution completes. In VS 2012 RTM the behaviour has changed. At the end of the test run, the IE window is closed even though there is no command from the test to do so. In the example below when the test runs, it opens 2 IE windows to the website. When the test run completes both the windows are closed, even though there is no command in the test to close the window. 03 – How to change the CUIT behaviour not to close the IE window after test execution? This change to this functionality in VS 2012 is by design. It is however possible to rollback the behaviour to how it originally was in VS 2010 i.e. the IE window will not close after the test execution unless otherwise commanded by the test to do so. To go back to the original functionality, set BrowserWindow.CloseOnPlaybackCleanup = false More details on the CloseOnPlaybackCleanup property can be found here http://msdn.microsoft.com/en-us/library/microsoft.visualstudio.testtools.uitesting.applicationundertest.closeonplaybackcleanup.aspx  HTH

    Read the article

  • XNA 4.0 - Purple/Pink Tint Over All Sprites After Viewing in FullScreen

    - by D. Dubya
    I'm a noob to the game dev world and recently finished the 2D XNA tutorial from http://www.pluralsight.com. Everything was perfect until I decided to try the game in Fullscreen mode. The following code was added to the Game1 constructor. graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 480; graphics.IsFullScreen = true; As soon as it launched in Fullscreen, I noticed that the entire game was tinted. None of the colours were appearing as they should. That code was removed, the game then launched in the 800x480 window, however the tint remained. I commented out all my Draw code so that all that was left was GraphicsDevice.Clear(Color.CornflowerBlue); //spriteBatch.Begin(); //gameState.Draw(spriteBatch, false); //spriteBatch.End(); //spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.Additive); //gameState.Draw(spriteBatch, true); //spriteBatch.End(); base.Draw(gameTime); The result was an empty window that was tinted Purple, not Blue. I changed the GraphicsDevice.Clear colour to Color.White and the window was tinted Pink. Color.Transparent gave a Black window. Even tried rebooting my PC but the 'tint' still remains. I'm at a loss here.

    Read the article

  • Starting multiple Chrome full screen instances on multiple monitors from (batch) script

    - by Bob Groeneveld
    My goal is to show different web content full screen on multiple monitors automatically after booting from a single computer. The browser I would like to use is Chrome. If Chrome does not support this and Firefox does that would be fine. The OS I would prefer is Windows, if it turns out that Linux is possible that would be fine. On Windows it is possible to set the position of the Chrome browser window (--window-position=) and make Chrome start in full screen mode (--kiosk). Using these options combined you can start Chrome full screen on any of the desktops/screens that you have connected to your computer. I have managed to get this working. However, if I then try to do the same thing a second time to have Chrome full screen on a second screen the second Chrome window will open over the first window, no matter the coordinates I use for the --window-position parameter. I have tried using Chrome profiles and copying the Chrome directory and starting the second chrome.exe. All these things result in the same behaviour.

    Read the article

  • Display Problems running Ubuntu 12.04 in Windows VMware Player

    - by Alex Reynolds
    I am posting this again because I have changed to VMWare Player and I discovered something new. I am running Ubuntu 12.04 LTS (Guest) in VMWare Player 6.0.2 on Windows 7 64-bit Host. I have VMWare Tools installed properly. I am running MATE but the problem persists when I change (to and from) xfce, gnome, mate a-- and back again I had been using this for a couple of years without any graphics issues. After an Ubuntu update (typical) -- my video is corrupt and will not refresh correctly. My desktop icons are "mirrored" and when I open a terminal window (for instance) -- sometimes -- the window appears multiple times. Of course, only one is the real image. It seems to be a refresh problem. When I move an active window around the screen the "older" images "erase" and my icons (for instance) are in the correct location. For instance, I can move the terminal around a pretty corrupted window and the screen behind it is repainted correctly. NEW: Next, I got the idea to try and Remote Desktop in to the Ubuntu 12.04 LTS Guest OS from my Windows 7 64-bit Host. Once working, and connected via Win RDC -- using MATE as default in my /etc/xrdp/startws.sh -- my video is not corrupted and works fine (as in the past). Any ideas about what is going on ? or how to fix this ?

    Read the article

  • AS3 How to check on non transparent pixels in a bitmapdata?

    - by Opoe
    I'm still working on my window cleaning game from one of my previous questions I marked a contribution as my answer, but after all this time I can't get it to work and I have to many questions about this so I decided to ask some more about it. As a sequel on my mentioned previous question, my question to you is: How can I check whether or not a bitmapData contains non transparent pixels? Subquestion: Is this possible when the masked image is a movieclip? Shouldn't I use graphics instead? Information I have: A dirtywindow movieclip on the bottom layer and a clean window movieclip on layer 2(mc1) on the layer above. To hide the top layer(the dirty window) I assign a mask to it. Code // this creates a mask that hides the movieclip on top var mask_mc:MovieClip = new MovieClip(); addChild(mask_mc) //assign the mask to the movieclip it should 'cover' mc1.mask = mask_mc; With a brush(cursor) the player wipes of the dirt ( actualy setting the fill from the mask to transparent so the clean window appears) //add event listeners for the 'brush' brush_mc.addEventListener(MouseEvent.MOUSE_DOWN,brushDown); brush_mc.addEventListener(MouseEvent.MOUSE_UP,brushUp); //function to drag the brush over the mask function brushDown(dragging:MouseEvent):void{ dragging.currentTarget.startDrag(); MovieClip(dragging.currentTarget).addEventListener(Event.ENTER_FRAME,erase) ; mask_mc.graphics.moveTo(brush_mc.x,brush_mc.y); } //function to stop dragging the brush over the mask function brushUp(dragging:MouseEvent):void{ dragging.currentTarget.stopDrag(); MovieClip(dragging.currentTarget).removeEventListener(Event.ENTER_FRAME,erase); } //fill the mask with transparant pixels so the movieclip turns visible function erase(e:Event):void{ with(mask_mc.graphics){ beginFill(0x000000); drawRect(brush_mc.x,brush_mc.y,brush_mc.width,brush_mc.height); endFill(); } }

    Read the article

  • Can Windows XP remember file icon position?

    - by g .
    Windows allows you to arrange icons however you like in a window. However after some time when I go back to the window, it has forgotten the icon positions and has completely rearranged the icons. Is there a way to preserve the icon positions? In the previous version of Windows I used, this would happen on rare occasions (about 6 months) and it might only move a couple of icons. Now it is happening practically every day and it is every single icon. Attempts to rearrange them manually are futile and it is increasingly maddening. Searching Google, I have found a number of programs that allow you to save and restore icon position on the desktop. But, this is just a regular folder window so I am not sure if any of those would even work. Some details: Windows XP SP 3 running in Parallels 5 virtual machine Auto Arrange and Align to Grid are NOT turned on Fresh OS install and only setting icon positions in one window

    Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >