Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 126/309 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

  • Microsoft CA certificate templates expires sooner than expected

    - by Tim Brigham
    The certificates my Microsoft CA is generating do not match the time period indicated in the template used. How can I resolve this? I recently created a new certificate template for use on my Linux boxes on my Microsoft CA (2008 R2 Enterprise). This template is approved for server and client authentication purposes with a validity period of 10 years - the expected lifetime of our Linux boxes - and the subject name supplied in the request. I have checked both the intermediate and offline CA - both have more than 10 years of life listed. Is there some kind of hard limit I'm hitting here?

    Read the article

  • Outlook displaying sender incorrectly

    - by Devnull
    In one user mailbox anything sent from any distribution list in our domain shows up as being from 'System Administrator'. It only happens when they are viewing the inbox using outlook (OWA is not affected), and its persisted across computers (though it did not happen immediately). When other users view the inbox from their outlook install (ie open users folder), everything appears as normal. Other folders are not affected. if a message is moved into a subfolder, the sender displays properly. Because of the persistence, and it only affecting one user, I suspect some user behavior is causing this, but i cannot determine what. Ive checked the contact list, and its not that.

    Read the article

  • How do I turn a shared computer back into a shared media drive?

    - by Brian Green
    There is an external hard drive that is set up as a shared media device for a TV. I tried to hook up my the library on my desktop as a shared media drive to watch movies from my computer on the TV. It worked for a little bit but about 5 seconds after getting into my computer the tv went blank and I couldn't access the external hard drive any more. When I checked on my computer the Hard drive was no longer a shared media device but now it was a computer on the network. How do I fix this and turn it back into a shared media device so I can access it on the TV?

    Read the article

  • Microsoft Keyboard(8000) play button opens Windows Media Player rather than Zune on Windows 7

    - by Chance
    Im currently using the Microsoft 8000 keyboard on Windows 7 and before installing Microsoft's Keyboard application, it was opening Zune and playing music with the play button. After installation, it is now opening Windows Media Player rather than Zune. If I have Zune open and press play, it will open WMP and upon pressing it again, will kick off the play command in Zune. I've checked the default programs in the control panel and have set Zune as default for all available but that hasn't changed anything. Has anyone run into this before? I'm a bit stumped as googling does not produce any relevant results. Thanks!

    Read the article

  • XAMPP MySQL stops running after ~1.5 seconds

    - by Nona Urbiz
    I have tried installing it as a service. Nothing seems to work! I have checked the status page and MySQL is listed as "Deactivated". When trying to open phpMyAdmin I get: Error MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) Connection for controluser as defined in your configuration failed. phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. and from the CD demo: Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'root'@'localhost' (using password: NO) in C:\xampp\htdocs\xampp\cds.php on line 77 Could not connect to database! Is MySQL running or did you change the password?        Thanks for any suggestions or help you can give!

    Read the article

  • How can I prevent Ask.com Toolbar from being installed every time Java is updated?

    - by abstrask
    As many are painfully aware of, Oracle continues to not only bundle the Java installation with the useless Internet browser toolbar from Ask.com, but also enable its installation by default. In addition to the toolbar, Ask also replaces your favourite search engine in your browser with Ask. Furthermore, the Java installation goes as far as to actually recommend installing this useless junk, meaning that any non IT-savvy person is more than likely to leave it checked and install it (after all, it was enabled by default and the friendly Java installer did recommend it, right?). To add insult to injury, even if you remove the Ask Toolbar, you can be sure to see it again soon, when the next Java update hits you (which seem to happen quite often lately, due to loads of security fixes for Java, but that's another story). I'll duly remove the check-mark to install Ask Toolbar, whenever I update Java, but when supporting my family and friends, it's obvious they don't. How can I prevent the pesky Ask.com Toolbar from being installed in the first place?

    Read the article

  • Firewall GPO not applying despite being enumerated by gpresult

    - by jshin47
    I have a need to open up the admin$ share on all of my domain's client PC's and I am trying to do so using group policy. I defined computer policy for Windows Firewall with Advanced Security in a policy object linked to the appropriate container and added the appropriate rules. However, they are not being applied! I feel like I have tried all of the obvious steps: I've checked gpresult and the resulting set of policy is the way that I would expect it to look. I've gpupdate /force and gpupdate /sync on a few client computers, but no matter what I do they don't seem to respond to my changes. I know that other computer policies in the GPO are being applied so it is strange that these are not. I have also disabled exceptions on clients in the firewall GPO, but that doesn't seem to be applying either. Here is a screenshot of the firewall.cpl from a client: Basically, although other options in the same GPO ARE applied for computer policy, the firewall settings seem to be ignored.

    Read the article

  • Sony Bravia (KDL-32EX402) audio connection fails

    - by Rasmus
    Hey. I'm having trouble connecting my computers audio to the TV (Sony Bravia KDL-32EX402). I'm using a standard AUX cable (some kind of adapter for L/R to go into the headphone plug on the computer). I'm connecting the other end to the back of the TV, it doesn't actually say "AUDIO IN" but it has to be (is also right below the "HDMI 1 AUDIO IN). When changing to "PC-mode" and setting the audio input to "PC" nothing happens. (but the pictures get's transmitted fine by VGA). I have checked that it's not the PC's headphone port, nor the AUX cable. What to do, what to do ?

    Read the article

  • How to keep Varnish cached populate after backend down for an extended period?

    - by Nicholas Tolley Cottrell
    We have Varnish 3.0.2 running on Amazon's Linux and it works great. We have a ttl of 48 hours for most content pages and much longer for images, PDFs etc. This weekend we've taken the backend down for some maintenance, so I upped the ttl to 5 days earlier in the week. I had assumed that anything in cache would continue to be served for up to 5 days, but much to our disappointment we checked varnishstat this morning and the cache was almost completely empty and varnish was serving "page not found" messages. I know that this is not what Varnish is designed to do, but why would it reset its cache when the backend is down? And how can I prevent it for next time?

    Read the article

  • Environment variables in Weblogic Managed Server with SSL nodemanager

    - by Eric Darchis
    We have a C legacy application start with JNI that requires environment variables. Not java -Djava.library.path -Dvar=foo as these are purely java. I need real environment variables. When we setup our domains, we usually use the SSH method to start the node managers. This works fine and the env variables are set properly. Recently the sysadmin has decided for a few reasons to use the SSL mode for nodemanagers. The servers start but the environment variables are not set. I checked with "pargs -e" (this is a Solaris machine) that the env variable was indeed not present from the nodemanager and for the managed server. Is SSL starting the managed server without running the .sh scripts or I am missing a parameter somewhere ?

    Read the article

  • Jenkins projects not visible even though user has all privleges

    - by Frank Rosario
    We want to lock down Jenkins and specific jobs to certain personnel. I have my account with all global privileges granted with project based matrix security. A coworker has a similar account and has been granted all the same privileges. When I log in with my account, I can see all of the projects we have setup. When my coworker whom has the exact same privileges logs in, none of the projects are visible. I've double and triple checked the permissions matrix to make sure we have the same global privileges; we do. Some of the projects have project specific privileges setup as well, but again; I've confirmed that both of us have the same access to these projects as well. So why can I see all the projects and my coworker is unable to see any of the projects?

    Read the article

  • Problem connecting to MySQL with zend

    - by wheresrhys
    I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

    Read the article

  • Issue with emails with attached emails.

    - by Jake
    There is this problem with our email in my organisation that happens to some people. When a remote sender sends an email that has an attached email, the reciever gets the email but the attached email is blank. The recieving mail server is MDaemon Pro. I also notice that the email header could be corrupted. I checked the MDaemon KB and find nothing regarding this issue. but I also highly doubt that this is an MS Outlook 2007 issue. Anyone have any ideas? Putting this issue aside, I feel that we really should not attach emails to emails. There is a reason for the "Forward" button. I can't understand why is it so difficult for them to just forward that email instead of drag and drop one into the other using outlook. Furthermore, if the attached email also has its own attachments, the resulting nesting will be quite unbearable. Don't you think so?

    Read the article

  • Monitor weirdness/flickering with new Viao PCG-3112L

    - by Rosarch
    I have a Sony VAIO PCG-3112L running Windows 7. It worked fine on one monitor, but now I'm using it with a 2 year old LG Flatron W2252TQ-TF. The colors are sorta off (although that might just be the monitor), but more annoyingly there are many horizontal flickering lines. It's more noticeable on non-white backgrounds. I tried rebooting the monitor, and reseting it to factory settings, but that didn't solve the issue. What could be the cause of this? The monitor works fine with an Asus netbook. I have checked that both ends of the VGA cable are plugged in between the Vaio and the monitor.

    Read the article

  • Cannot increase my screen resolution

    - by Patrick Beardmore
    I am trying to install my new monitor but my Graphics Adapter (Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family) does not offer a resolution of 1920x1080 in the [Display Properties Settings] window. It only offers up to 1360x768. Can anyone explain to me how I can increase this number to the correct resolution. The monitor does show my the windows desktop, albeit at a lower resolution which is being stretched to fill the screen, making it look very blurry. I have installed the "Monitor Drivers" I found on the disk supplied with new monitor, but these do not appear to have made any difference. The Intel software that comes with the graphics card has an information window containing lots of info about the card and the monitor itself. I have placed this on a webpage so you can examine it if helpful. Many thanks with your help in getting my Christmas present to work! Patrick P.S.: Before I got this screen I checked to see if my graphics card could cope with such a large screen.

    Read the article

  • Plesk and Apache configuration gives me 403 on all sites

    - by Michael Stark
    My friends server running Plesk 9.2 with Apache. Now there were some problems the last days where he couldn't tell me what exactly has happened. The situation now is the following: He has a lot of domains in it. When somebody visit any domain it shows up a 403. I checked the logs and saw the problem [Sun Jun 24 08:24:47 2012] [error] [client XX.XX.XX.XX] script '/srv/www/htdocs/index.php' not found or unable to stat Apache should route to '/srv/www/vhosts/domain.tld/htdocs/index.php' instead of /srv/www/htdocs/index.php It's doing that on all of the domains. Can you tell me whats wrong and how to fix it?

    Read the article

  • Plesk 9 - unable to modify atmail vhost template

    - by Ben
    Running into a small issue recently that causes my server's atmail to fail authenticating users. I gathered from a web search that it's because i recently enabled apc on the server. I've found some reference mentioning I need to modify the atmail vhost template, but that reference is for Plesk 10 (i'm on 9). The atmail config isn't in the same spot. I've found this unrelated topic that explains how to modify the vhost settings for atmail on plesk 9, which I have done (adding php_admin_flag apc.enabled off to it). I then recompiled the server config using /usr/local/psa/admin/bin/websrvmng -a but it doesn't seem to pick up the changes. If I look at /etc/httpd/conf.d/zzz_atmail_vhost.conf after recompiling it still doesn't show the apc settings. Summary of steps taken: Modified /etc/psa-webmail/atmail/atmail_vhost.conf and added php_admin_flag register_globals off to the config Recompiled with /usr/local/psa/admin/bin/websrvmng -a Checked /etc/httpd/conf.d/zzz_atmail_vhost.conf But no changes. What am I missing?

    Read the article

  • Is there a common X-Header for RFC 2821 "MAIL FROM"? Should it be DKIM signed?

    - by makerofthings7
    w.r.t. the difference between RFC2821 MAIL From and RFC2822 FROM I'm considering having my MTA add a header specifying what was sent in the MAIL FROM portion of the envelope. The RFC2821 header is used for receiving email bouncebacks, and is the header that is checked in SPF and some SenderID configurations. The goal is to make it easier for diagnostics and debugging by having this low level information in the email header. What is an acceptable name for this SMTP header? Should this header be signed by DKIM? Is there any reason why it shouldn't be signed?

    Read the article

  • de-assign alt + right arrow

    - by jcollum
    I'm trying to map View.NavigateBackward and View.NavigateBackward like so: View.NavigateBackward = Alt + LeftArrow View.NavigateForward = Alt + RightArrow Pretty simple to do in Visual Studio with the Keyboard Options dialog. OK so I've assigned the shortcuts and the NavigateBackward one is working. But NavigateForward, which used to be assigned to Edit.CompleteWord, is staying with its old assignment. I've checked that Edit.CompleteWord is assigned to 'Ctrl+K, W' but the Alt+RightArrow is still behaving as complete word. Is there something special about the arrow keys that I can't assign them? I want to do this so the mouse buttons behave the same in VS 2010 and my web browser. Works fine for the back button, but the forward button won't re-assign properly. Suggestions?

    Read the article

  • Windows 2008 R2 Task Scheduler triggered an event for unknown reasons.

    - by Mike
    Today I arrived at the office only to find that a task, which was scheduled to trigger at 5:30PM EST each Friday, had triggered on its own at 6:01AM EST this morning. I checked the event logs as well as the task schedule log and all of the evidence points to a timed trigger starting this task with the correct credentials, however the task history reports the task has not been triggered since last Friday when it ran to completion successfully. I do not have this task set to random start times or start if missed. This is the first time I have observed this happen in the Windows Task Scheduler and want to know if anyone else has come across this, why it happened and how to fix it?

    Read the article

  • /data/tmp on database server?

    - by Mellon
    I am on a Linux ubuntu machine with MySQL installed. My teacher gave out an assignment which mentioned "copy cars.dat to /data/tmp on the MySQL database server" without any explanations, I do not know what is the "/data/tmp on database server" means exactly? Basically after that I need to execute SQL statement like LOAD DATA INFILE '/data/tmp/cars.dat' INTO TABLE cars So, what does copy cars.dat to /data/tmp on the database server means as there is no /data/tmp directory even? Personally, I checked /etc/mysql/my.cnf file, inside which there are definitions of : ... basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp ... Does it mean to copy cars.dat to the tmpdir which is just /tmp under root directory??

    Read the article

  • Various problems with software raid1 array built with Samsung 840 Pro SSDs

    - by Andy B
    I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

    Read the article

  • No response from example.com using Apache

    - by stevens-G
    I am unable to access example.com or by local IP after restarting the server. I checked to make sure httpd service was on. I looked at the error_log in /var/log/httpd and found nothing. Tried to restart httpd again and it says 'Ok'. I'm not sure where else to check. I did move DocumentRoot from /var/www to /web-root and it worked before restarting the server. I tried pointing it back to /var/www and still not able to view the page. IPtables have not changed. Any suggestions?

    Read the article

  • change browser to open weblinks in thunderbird

    - by Bevor
    Hello, because it's almost obvious that either Thunderbird or Firefox freeze my whole system after some time, I'd like to not use FF at the moment and let Thunderbird run only for a short time as long as I check e-mails. Thunderbird web links should be opened with opera from now. For that I went in Thunderbird to Preferences-Advanced-General-Config Editor and set the following: network.protocol-handler.app.http -> /usr/bin/opera network.protocol-handler.app.https -> /usr/bin/opera network.protocol-handler.warn-external.ftp -> true network.protocol-handler.warn-external.http -> true network.protocol-handler.warn-external.https -> true Moreover I changed in Gnome in System-Preferences-Prefered Applications Opera as webbrowser and I checked in FF that it should warn if FF is not the default browser (obviously it isn't anymore). Unfortunately all of these settings doesn't work. Thunderbird still opens web links with FF. Any explantions why? (I already restarted Thunderbird although I don't have to, but no effect)

    Read the article

  • Windows network takes long time to access

    - by IrfanRaza
    Hello friends, I have 4 Winodws XP systems connected in a domain with Windows 2003 server. Domain name is "SoftGenIndia". We are using Star topology. I have checked all the cables and connections, all are OK. What happening is that when i try to open the computer on domain it takes long time to show the shares (around 2-3 mins). Is there anything i am missing? Can anybody provide solution on this. Thanks for sharing your valuable time. Regards Mohammad Irfan http://softwaregenius.net

    Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >