Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 141/613 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Issue with Netgear GS108T Managed Switch and Jumbo Frames

  - by Richie086

  I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

  Read the article

• How to resolve a "driver failure" error in the Cisco VPN client connecting from a Windows 7 client

  - by JosephStyons

  I have recently upgraded my laptop from Windows Vista SP1 to Windows 7 Professional. After the upgrade, if I try to use the Cisco VPN client to connect to a network, I get this message: Secure VPN Connection terminated locally by the Client. Reason 440: Driver Failure. Prior to the upgrade, I was able to connect with no problems. The version of the client I am using is 5.0.05.0290.

  Read the article

• Google Wave CLI client and googlewave.com

  - by Andrew Ho

  I'm trying to use the CLI client for Google Wave that Google have created with my @googlewave.com account. I can't seem to get it to connect -- does anyone know if this is actually possible, or if it will only connect to locally hosted wave servers?

  Read the article

• Stop squid caching 302 and 307 with deny_info

  - by 0xception

  TLDR: 302, 307 and Error pages are being cached. Need to force a refresh of the content. Long version: I've setup a very minimal squid instance running on a gateway which shouldn't not cache ANYTHING but needs to be solely used as a domain based web filter. I'm using another application which redirects un-authenticated users to the proxy which then uses the deny_info option redirects any non-whitelisted request to the login page. After the user has authenticated the firewall rule gets placed so they no longer get sent to the proxy. The problem is that when a user hits a website (xkcd.com) they are unauthenticated so they get redirected via the firewall: iptables -A unknown-user -t nat -p tcp --dport 80 -j REDIRECT --to-port 39135 to the proxy at this point squid redirects the user to the login page using a 302 (i've also tried 307, and i've also make sure the headers are set to no-cache and/or no-store for Cache-Control and Pragma). Then when the user logs into the system they get firewall rule which no longer directs them to the squid proxy. But if they go to xkcd.com again they will have the original redirection page cached and will once again get the login page. Any idea how to force these redirects to NOT be cached by the browser? Perhaps this is a problem w/ the browsers and not squid, but not sure how to get around it. Full squid config below. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl localnet src 192.168.182.0/23 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl https port 443 acl http port 80 acl CONNECT method CONNECT # # Disable Cache # cache deny all via off negative_ttl 0 seconds refresh_all_ims on #error_default_language en # Allow manager access only from localhost http_access allow manager localhost http_access deny manager # Deny access to anything other then http http_access deny !http # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !https visible_hostname gate.ovatn.net # Disable memory pooling memory_pools off # Never use neigh cache objects for cgi-bin scripts hierarchy_stoplist cgi-bin ? # # URL rewrite Test Settings # #acl whitelist dstdomain "/etc/squid/domains-pre.lst" #url_rewrite_program /usr/lib/squid/redirector #url_rewrite_access allow !whitelist #url_rewrite_children 5 startup=0 idle=1 concurrency=0 #http_access allow all # # Deny Info Error Test # acl whitelist dstdomain "/etc/squid/domains-pre.lst" deny_info http://login.domain.com/ whitelist #deny_info ERR_ACCESS_DENIED whitelist http_access deny !whitelist http_access allow whitelist http_port 39135 transparent ## Debug Values access_log /var/log/squid/access-pre.log cache_log /var/log/squid/cache-pre.log # Production Values #access_log /dev/null #cache_log /dev/null # Set PID file pid_filename /var/run/gatekeeper-pre.pid SOLUTION: I believe I might have found a solution to this. After days and days trying to figure it out, only through a random stumble I found client_persistent_connections off server_persistent_connections off This did the trick. So it wasn't so much cache as it was a single persistent connection messing things up. W000T!

  Read the article

• Windows 7 Multi Monitor RDC

  - by Peter Stegnar

  I would like to use all my monitors for the remote session (an option in RDC dialogue) if I connect (from Windows 7) to the one server with Windows 2008 R2 it works OK (I have remote connection on my all monitors) when do I connect to the another server with Windows 7 it just wound not use all my monitors, but just one (full screen mode). What do I missing here? Some setting on the Windows 7 server?

  Read the article

• ssh - no route to host

  - by cupakob

  I have 3 machines (A, B and C) behind WLAN Router. From B i can make ssh to A and from A to B also. Ssh between C and A is also working (both destination, C-A and A-C). But when i try to connect B to C or C to B i get always ssh: connect to host <HOST> port 22: No route to host What can be the reason for this error?

  Read the article

• Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

  - by zchads

  Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

  Read the article

• Share 3G connection over WiFi-LAN network

  - by kush.impetus

  This is how I have established network between my PC and my laptop at home (being novice in networking, it took me few days to achieve the feat). And it is working perfectly. I can easily share files between them. Laptop IP Address: 192.168.1.4 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 Desktop IP Address: 192.168.1.5 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 ASUS RT-N10+ Router IP Address: 192.168.1.4 Default Gateway: 192.168.1.2 I have connected the Desktop PC to the router using a LAN cable, and laptop to router over WiFi. Both, PC and laptop are running on Windows 7 OS, are on same HomeGroup, have same username / password. Also, I have connected the Ethernet cable to LAN port 1 of the router. Click here to view a graphical representation of the network. Can't post image here, because I don't have 10 reputation points. Now, what I want is use connect to Internet using a 3G USB modem on one device and share it over the network on the other. I tried Huawei and Micromax 3G USB modem. Both obtain a new IP address whenever I connect to Internet (means they have dynamic IPs). Rest, both have Subnet Mask as 255.255.255.255 and Default Gateway as 0.0.0.0. In that case, I cannot directly share Internet from the modem. Preferred DNS is blank for now in both, laptop and PC. What I am planning to do is to connect to Internet on laptop using the 3G modem and share the Internet connection over laptop's Wi-Fi (as hotspot) using Connectify, which I have done already. That, I suppose, will broadcast a static IP to connect to. Now what I can't figure out is that what changes should I make to the network settings of the router and the PC so that PC connects to the Internet broadcast by Connectify? Is that possible on the first hand? Please note that I am trying to implement the network without spending anything extra (for purchasing as USB WiFi adapter for PC, of course, which could have made the life lot easier for me). Thanks in advance

  Read the article

• Connecting to Outlook Web (OWA) via a desktop client

  - by mgroves

  I'm having all kinds of timeout problem with the web-based client for Outlook Online (microsoftonline.com), and I'd like to use something like Live Mail to connect instead. So, can I use Live Mail to do that? If so, how do I configure it? If I can't use Live Mail, are there any desktop clients that can connect (I'd like to retain access to the calendar, etc)?

  Read the article

• Westell router setup page

  - by eych

  I can connect to the internet, ping 192.168.1.1 with no problem, haven't changed any firewall or Anti-virus settings, but bringing up 192.168.1.1 in the browser gives 'Problem loading page'. XP machine...was able to connect to the setup page few weeks ago. Any thoughts?

  Read the article

• How do I have a network share mount in Mac OS X persist between reboots

  - by user26453

  I currently connect to a Windows (smb) share via the Finder - Go - Connect To Server. I have to type in the IP (although I have saved the credentials in my keychain). If I reboot or logout, I have to do this again. I would like the SMB share I am connecting to always be available as soon as I login. How can I accomplish this?

  Read the article

• How do I remove the on screen keyboard from the logon screen in Windows Remote Desktop Server 2008 R

  - by Gomibushi

  The on screen keyboard (OSK) from the "ease of access" tools pops up on EVERY connect to the server, even if you have not activated it. I can't seem to find a control panel or reg setting to switch it off. It is VERY "in your face" for linux users who connect at lower resolutions and do not provide all credentials, but have to type username and password. I'm running a 2008 R2 Terminal Server/Remote Desktop Server.

  Read the article

• having trouble with bog standard openldap server db

  - by dingfelder

  I am having trouble getting an "out of the box" openldap server working. The examples on the openldap site stiull refer to the slapd.conf file, but the install does not make that. if I start the server (service slapd start) I do not get any errors, but cannot connect ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) anyone have a simple howto for v2.4 ? I am on fedora15, installed openldap-servers and clients via yum. I have phpldapadmin installed that I can try and connect with once I can get the command line working

  Read the article

• Creating an ad-hoc wireles network on a router

  - by bo7ons

  My router is a Wag200g with openwag firmware. My laptop is connected to the university's internet through an ethernet cable and i have to set the browser proxy settings to connect. I want to create an ad-hoc network with a router so that i can let my laptop do the proxy routing/forwarding itself and that my android phone can connect to it and use my university's proxy (I've tried setting the proxy on my phone but it wont work).. Or am i approaching this the wrong way?

  Read the article

• Why is SMB from a Windows 7 64-bit to OS X Server so slow when using DNS vs IP?

  - by chuboy

  When I connect my 64-bit Windows 7 to a OS X server using \servername, my transfer rates are around 400KB/s. However, when I do the same thing using \192.168.0.10 (which is the IP of the server), transfer rates jump to 30MB/s. All of this happens via a gigabit ethernet cable with my wireless disabled I heard Samba itself "doesn't use DNS", but if that's the case, how am I able to connect to the server in the first place?

  Read the article

• Why won't my Nokia E52 charge on some USB ports

  - by snot

  I have two computers. If I connect my Nokia to one of them using the usb cable the charge process will start. If I connect the phone to the other computer (using the same cable!) it won't start charging. Any suggestions what the problem is? (I couldn't find a usb related difference between both computers)

  Read the article

• Read-only access to MMC functionality

  - by Travis Ingram

  Does anyone know of a Windows Server 2008 role(s) to allow readonly access to MMC (MS Management Console) facilities - i.e. we would like to be able to view (not add/update/delete) "Administrative Tools" functionality such as IIS websites, Event log, Users and groups, status of services, etc. This is so we can connect to a say a Development server (administered by another team) to check configuration before/during deployment via say Administive Tools | Computer Management | Connect to another computer Many thanks Travis

  Read the article

• Visual Studio 2008 to Team Foundation Server 2010

  - by tivo

  I have Visual Studio 2008 and I installed Team Explorer 2008 Team Explorer 2008 gives me the following error message when trying to connect a TFS 2010 server: TF31002: Unable to connect to this Team Foundation Server: servername.... Any thougths?

  Read the article

• Problem with monitoring Glassfish with JConsole..

  - by Pavel

  I have enabled JMX connection on remote Glassfish server and then I've restarted it. During starting server notified: Standard JMX Clients (like JConsole) can connect to JMXServiceURL: [service:jmx:rmi:///jndi/rmi://myserver:8686/jmxrmi] for domain management purposes. Port 8686 is opened for connections. But I can't connect to server with JConsole.. It says: Connection failed. How can I solve this problem? Thanks in advance.

  Read the article

• problem with VNC

  - by Emma

  I set a VNC on my server and but when I want to connect to my server with VNC i get this error : " Failed to connect to server" what am i going to do ? thanks in advance

  Read the article

• problem with VNC

  - by Emma

  I set a VNC on my server and but when I want to connect to my server with VNC i get this error : " Failed to connect to server" what am i going to do ? thanks in advance

  Read the article

• Can't make VM off Windows XP

  - by WebDevHobo

  I've got a copy of WinXP off of MSDNAA, with a key. I've mounted it to my CD-drive, and now I'm trying to make it in to a VM. The problem is, it seems that the thing is constantly trying to connect to a DHCP server, fails to connect and then decides no operating system was found. The file I got off MSDNAA was an .img file, so I had to mount it to a virtual CD drive. VmWare workstation comes with a Windows XP iso, tried that, also failed.

  Read the article

• internet connection occasionally stops, but can still ping .com sites

  - by rj

  hi, every half hour or so, for 1-2 minutes my browser will stop navigating to sites, "waiting for ... to respond.." within 2 minutes i will be able to connect to sites and browse like normal again. weird thing is, while i cannot connect to sites, i get ping replies from any .com i type in. this happens on my home wireless network, using FF and IE on a win7 desktop AND FF on an ubuntu laptop the network is wpa2 secured, these are the only connections.

  Read the article

• mysql: job failded to start. mysqld.sock is missing

  - by Freefri

  How can I fix this and start mysql-server? After /etc/init.d/mysql start or service mysql start I get the message start: "Job failed to start" And after # mysqld I get this: mysqld 121123 11:33:33 [ERROR] Can't find messagefile '/usr/share/mysql/errmsg.sys' 121123 11:33:33 [Note] Plugin 'FEDERATED' is disabled. mysqld: Unknown error 1146 121123 11:33:33 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121123 11:33:33 InnoDB: The InnoDB memory heap is disabled 121123 11:33:33 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121123 11:33:33 InnoDB: Compressed tables use zlib 1.2.3.4 121123 11:33:33 InnoDB: Initializing buffer pool, size = 128.0M 121123 11:33:33 InnoDB: Completed initialization of buffer pool 121123 11:33:33 InnoDB: highest supported file format is Barracuda. 121123 11:33:33 InnoDB: Waiting for the background threads to start 121123 11:33:34 InnoDB: 1.1.8 started; log sequence number 1595675 121123 11:33:34 [ERROR] Aborting 121123 11:33:34 InnoDB: Starting shutdown... 121123 11:33:35 InnoDB: Shutdown completed; log sequence number 1595675 121123 11:33:35 [Note] I try to do what mysql say me to do: mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed And yes, /var/run/mysql is empty: mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed And this is my file /etc/mysql/my.cnf # cat /etc/mysql/my.cnf |grep sock # Remember to edit /etc/mysql/debian.cnf when changing the socket location. socket = /var/run/mysqld/mysqld.sock socket = /var/run/mysqld/mysqld.sock socket = /var/run/mysqld/mysqld.sock Then I try to reinstall mysql from cero: apt-get purge mysql-client mysql-common mysql-server rm -R /var/lib/mysql rm -R /etc/mysql rm -R /var/run/mysqld userdel mysql apt-get install mysql-server mysql-client Then, after typing my root password for mysql I get this error: | Unable to set password for the MySQL "root" user ¦ ¦ ¦ ¦ An error occurred while setting the password for the MySQL administrative ¦ ¦ user. This may have happened because the account already has a password, or ¦ ¦ because of a communication problem with the MySQL server. ¦ ¦ ¦ ¦ You should check the account's password after the package installation. ¦ ¦ ¦ ¦ Please read the /usr/share/doc/mysql-server-5.5/README.Debian file for more ¦ ¦ information. And again I can't start mysql getting the same messages.

  Read the article

• How do I have a network share mount in OSX persist between reboots

  - by user26453

  I currently connect to a share via the Finder - Connect To Server. I have to type in the IP (although I have saved the credentials in my keychain). If I reboot or logout, I have to do this again. I would like the smb share I am connecting to always be available as soon as I login. How can I accomplish this?

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >