Search Results

Search found 1877 results on 76 pages for 'vendor'.

Page 15/76 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Guest blog: A Closer Look at Oracle Price Analytics by Will Hutchinson

  - by Takin Babaei

  Overview:  Price Analytics helps companies understand how much of each sale goes into discounts, special terms, and allowances. This visibility lets sales management see the panoply of discounts and start seeing whether each discount drives desired behavior. In Price Analytics monitors parts of the quote-to-order process, tracking quotes, including the whole price waterfall and seeing which result in orders. The “price waterfall” shows all discounts between list price and “pocket price”. Pocket price is the final price the vendor puts in its pocket after all discounts are taken. The value proposition: Based on benchmarks from leading consultancies and companies I have talked to, where they have studied the effects of discounting and started enforcing what many of them call “discount discipline”, they find they can increase the pocket price by 0.8-3%. Yes, in today’s zero or negative inflation environment, one can, through better monitoring of discounts, collect what amounts to a price rise of a few percent. We are not talking about selling more product, merely about collecting a higher pocket price without decreasing quantities sold. Higher prices fall straight to the bottom line. The best reference I have ever found for understanding this phenomenon comes from an article from the September-October 1992 issue of Harvard Business Review called “Managing Price, Gaining Profit” by Michael Marn and Robert Rosiello of McKinsey & Co. They describe the outsized impact price management has on bottom line performance compared to selling more product or cutting variable or fixed costs. Price Analytics manages what Marn and Rosiello call “transaction pricing”, namely the prices of a given transaction, as opposed to what is on the price list or pricing according to the value received. They make the point that if the vendor does not manage the price waterfall, customers will, to the vendor’s detriment. It also discusses its findings that in companies it studied, there was no correlation between discount levels and any indication of customer value. I urge you to read this article. What Price Analytics does: Price analytics looks at quotes the company issues and tracks them until either the quote is accepted or rejected or it expires. There are prebuilt adapters for EBS and Siebel as well as a universal adapter. The target audience includes pricing analysts, product managers, sales managers, and VP’s of sales, marketing, finance, and sales operations. It tracks how effective discounts have been, the win rate on quotes, how well pricing policies have been followed, customer and product profitability, and customer performance against commitments. It has the concept of price waterfall, the deal lifecycle, and price segmentation built into the product. These help product and sales managers understand their pricing and its effectiveness on driving revenue and profit. They also help understand how terms are adhered to during negotiations. They also help people understand what segments exist and how well they are adhered to. To help your company increase its profits and revenues, I urge you to look at this product. If you have questions, please contact me. Will HutchinsonMaster Principal Sales Consultant – Analytics, Oracle Corp. Will Hutchinson has worked in the business intelligence and data warehousing for over 25 years. He started building data warehouses in 1986 at Metaphor, advancing to running Metaphor UK’s sales consulting area. He also worked in A.T. Kearney’s business intelligence practice for over four years, running projects and providing training to new consultants in the IT practice. He also worked at Informatica and then Siebel, before coming to Oracle with the Siebel acquisition. He became Master Principal Sales Consultant in 2009. He has worked on developing ROI and TCO models for business intelligence for over ten years. Mr. Hutchinson has a BS degree in Chemical Engineering from Princeton University and an MBA in Finance from the University of Chicago.

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• PowerShell: Read Excel to Create Inserts

  - by BuckWoody

  I’m writing a series of articles on how to migrate “departmental” data into SQL Server. I also hold workshops on the entire process – from discovering that the data exists to the modeling process and then how to design the Extract, Transform and Load (ETL) process. Finally I write about (and teach) a few methods on actually moving the data. One of those options is to use PowerShell. There are a lot of ways even with that choice, but the one I show is to read two columns from the spreadsheet and output statements that would insert the data using a stored procedure. Of course, you could re-write this as INSERT statements, out to a text file for bcp, or even use a database connection in the script to move the data directly from Excel into SQL Server. This snippet won’t run on your system, of course – it assumes a Microsoft Office Excel 2007 spreadsheet located at c:\temp called VendorList.xlsx. It looks for a tab in that spreadsheet called Vendors. The statement that does the writing just uses one column: Vendor Code. Here’s the breakdown of what I’m doing: In the first block, I connect to Microsoft Office Excel. That connection string is specific to Excel 2007, so if you need a different version you’ll need to look that up. In the second block I set up a selection from the entire spreadsheet based on that tab. Note that if you’re only after certain data you shouldn’t get the whole spreadsheet – that’s just good practice. In the next block I create the text I want, inserting the Vendor Code field as I go. Finally I close the connection. Enjoy! $ExcelConnection= New-Object -com "ADODB.Connection" $ExcelFile="c:\temp\VendorList.xlsx" $ExcelConnection.Open("Provider=Microsoft.ACE.OLEDB.12.0;` Data Source=$ExcelFile;Extended Properties=Excel 12.0;") $strQuery="Select * from [Vendors$]" $ExcelRecordSet=$ExcelConnection.Execute($strQuery) do { Write-Host "EXEC sp_InsertVendors '" $ExcelRecordSet.Fields.Item("Vendor Code").Value "'" $ExcelRecordSet.MoveNext()} Until ($ExcelRecordSet.EOF) $ExcelConnection.Close() Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Join us on our Journey to be #1 in SaaS!

  - by jessica.ebbelaar(at)oracle.com

  WHY ORACLE? Oracle is a robust organization that has proven to maintain growth and innovation at all levels with a constant evolving attitude. The main ingredient of Oracles success is the 105.000 talented employees who constantly amaze each other in building a better and more innovative organization. Oracle is a company where YOU can make a difference. What is OD? Oracle Direct is a state-of-the-art, multi-channel EMEA sales operation bringing to life the benefits of Oracle’s complete technology stack. It offers you the unique opportunity to work with the most talented and like-minded sales professionals in the industry.  You will have access to world class training and structured career development programmes allowing you to accelerate your Solution Sales career across a multitude of product lines and a choice of attractive locations. What positions are OD Hiring?   Oracle is on a journey to be the #1 SaaS vendor in EMEA.  Due to recent expansion and acquisitions within our Cloud Business, we are now growing our EMEA Cloud Applications Sales Group in Dublin. We have many exciting NEW opportunities across our CRM and HCM SaaS Sales teams. As a SaaS Sales Account Manager, you will proactively manage an assigned territory / vertical with responsibility for the full sales cycle. This role requires strong business development, solution selling, account management and closing skills. WHY ORACLE? Oracle is a robust organization that has proven to maintain growth and innovation at all levels with a constant evolving attitude. The main ingredient of Oracles success is the 105.000 talented employees who constantly amaze each other in building a better and more innovative organization. Oracle is a company where YOU can make a difference. What is OD? Oracle Direct is a state-of-the-art, multi-channel EMEA sales operation bringing to life the benefits of Oracle’s complete technology stack. It offers you the unique opportunity to work with the most talented and like-minded sales professionals in the industry.  You will have access to world class training and structured career development programmes allowing you to accelerate your Solution Sales career across a multitude of product lines and a choice of attractive locations. What positions are OD Hiring? Oracle is on a journey to be the #1 SaaS vendor in EMEA.  Due to recent expansion and acquisitions within our Cloud Business, we are now growing our EMEA Cloud Applications Sales Group in Dublin. We have many exciting NEW opportunities across our CRM and HCM SaaS Sales teams. As a SaaS Sales Account Manager, you will proactively manage an assigned territory / vertical with responsibility for the full sales cycle. This role requires strong business development, solution selling, account management and closing skills. What is the Business Development Group (BDG) The Business Development Group is the key entry point in Oracle for the future Sales and Management talent of the organisation. We are the Demand Generation engine for Oracle in EMEA. We provide revenue generating, quality sales pipeline to our Inside and Field Sales professionals as well as to our Channel Partners. Our current focus is to provide an agile and flexible service offering to our customers and stakeholders to meet ever changing business needs, whilst constantly striving to improve the customer experience, quality of our pipeline, market coverage and penetration. As a SaaS Business Development Consultant (BDC) you will be the first touch point with new customers. Your goal is to proactively identify and qualify business opportunities leading to revenue for Oracle. You will work closely with your Inside Sales colleagues who will progress your qualified pipeline and opportunities. Work for us Work for the only multi-pillar SaaS vendor in the market Be part of a FUN, fast paced and truly International sales team  Develop you solution sales EXPERTISE Drive your CAREER development within a structured and supportive environment The Profile You have a passion for selling cutting-edge technology You thrive in a fast paced and dynamic work environment where being the best is paramount Your priority is always the customer You live for a challenge and you love to win Join us on our Journey to be #1 in SaaS and be part of our Cloud Success Story! You will find more information about open roles here

  Read the article

• We have our standards, and we need them

  - by Tony Davis

  The presenter suddenly broke off. He was midway through his section on how to apply to the relational database the Continuous Delivery techniques that allowed for rapid-fire rounds of development and refactoring, while always retaining a “production-ready” state. He sighed deeply and then launched into an astonishing diatribe against Database Administrators, much of his frustration directed toward Oracle DBAs, in particular. In broad strokes, he painted the picture of a brave new deployment philosophy being frustratingly shackled by the relational database, and by especially by the attitudes of the guardians of these databases. DBAs, he said, shunned change and “still favored tools I’d have been embarrassed to use in the ’80′s“. DBAs, Oracle DBAs especially, were more attached to their vendor than to their employer, since the former was the primary source of their career longevity and spectacular remuneration. He contended that someone could produce the best IDE or tool in the world for Oracle DBAs and yet none of them would give a stuff, unless it happened to come from the “mother ship”. I sat blinking in astonishment at the speaker’s vehemence, and glanced around nervously. Nobody in the audience disagreed, and a few nodded in assent. Although the primary target of the outburst was the Oracle DBA, it made me wonder. Are we who work with SQL Server, database professionals or merely SQL Server fanbois? Do DBAs, in general, have an image problem? Is it a good career-move to be seen to be holding onto a particular product by the whites of our knuckles, to the exclusion of all else? If we seek a broad, open-minded, knowledge of our chosen technology, the database, and are blessed with merely mortal powers of learning, then we like standards. Vendors of RDBMSs generally don’t conform to standards by instinct, but by customer demand. Microsoft has made great strides to adopt the international SQL Standards, where possible, thanks to considerable lobbying by the community. The implementation of Window functions is a great example. There is still work to do, though. SQL Server, for example, has an unusable version of the Information Schema. One cast-iron rule of any RDBMS is that we must be able to query the metadata using the same language that we use to query the data, i.e. SQL, and we do this by running queries against the INFORMATION_SCHEMA views. Developers who’ve attempted to apply a standard query that works on MySQL, or some other database, but doesn’t produce the expected results on SQL Server are advised to shun the Standards-based approach in favor of the vendor-specific one, using the catalog views. The argument behind this is sound and well-documented, and of course we all use those catalog views, out of necessity. And yet, as database professionals, committed to supporting the best databases for the business, whatever they are now and in the future, surely our heart should sink somewhat when we advocate a vendor specific approach, to a developer struggling with something as simple as writing a guard clause. And when we read messages on the Microsoft documentation informing us that we shouldn’t rely on INFORMATION_SCHEMA to identify reliably the schema of an object, in SQL Server!

  Read the article

• jqGrid dynamic select option - beforeEditCell not firing

  - by mango

  I'm creating a jqgrid with one drop down column. I need the options of the drop down columns to change dynamically so I thought I can catch the beforeCellEdit event. however it does not seem to be firing. any idea on what i am doing wrong? there is no error, and i did check that i have included the jqgrid edit js files. var lastsel2; jQuery(document).ready(function(){ jQuery("#projectList").jqGrid({ datatype: 'json', url:'projectDrv.jsp', mtype: 'GET', height: 250, colNames:['Node','Proposal #', 'Status', 'Vendor', 'Actions'], colModel :[ {name:'node', index:'node', width:100, editable:false, sortable:false}, {name:'proposal', index:'proposal', width:100, editable:false, resizable:true }, {name:'status', index:'status', width:100, resizable:true, sortable:false, editable:false }, {name:'vendor', index:'vendor', width:100, resizable:true, editable:false, sortable: false }, {name:'actions', index:'actions', width:100, resizable:true, sortable:false, editable: true, edittype:"select" } ], pager: '#pager', rowNum: 10, sortname: 'proposal', sortorder: 'desc', viewrecords: true, onSelectRow: function(id){ if (id && id!==lastsel2){ jQuery('#projectList').jqGrid('restoreRow',lastsel2); jQuery('#projectList').jqGrid('editRow',id,true); lastsel2 = id; } }, beforeEditCell: function(rowid, cellname, value, irow, icol) { alert("before edit here " + rowid); // set editoptions here } });

  Read the article

• Modify python USB device driver to only use vendor_id and product_id, excluding BCD

  - by Tony

  I'm trying to modify the Android device driver for calibre (an e-book management program) so that it identifies devices by only vendor id and product id, and excludes BCD. The driver is a fairly simply python plugin, and is currently set up to use all three numbers, but apparently, when Android devices use custom Android builds (ie CyanogenMod for the Nexus One), it changes the BCD so calibre stops recognizing it. The current code looks like this, with a simple list of vendor id's, that then have allowed product id's and BCD's with them: VENDOR_ID = { 0x0bb4 : { 0x0c02 : [0x100], 0x0c01 : [0x100]}, 0x22b8 : { 0x41d9 : [0x216]}, 0x18d1 : { 0x4e11 : [0x0100], 0x4e12: [0x0100]}, 0x04e8 : { 0x681d : [0x0222]}, } The line I'm specifically trying to change is: 0x18d1 : { 0x4e11 : [0x0100], 0x4e12: [0x0100]}, Which is, the line for identifying a Nexus One. My N1, running CyanogenMod 5.0.5, has the BCD 0x0226, and rather than just adding it to the list, I'd prefer to eliminate the BCD from the recognition process, so that any device with vendor id 0x18d1 and product id 0x4e11 or 0x4e12 would be recognized. The custom Android rom doesn't change enough for the specifics to matter. The syntax seems to require the BCD in brackets. How can I edit this so that it matches anything in that field?

  Read the article

• Is an LSA MSV1_0 subauthentication package needed for some impersonation use cases?

  - by Chris Sears

  Greetings, I'm working with a vendor who has implemented some code that uses a Windows LSA MSV1_0 subauthentication package (MSDN info if you're interested: http://msdn.microsoft.com/en-us/library/aa374786(VS.85).aspx ) and I'm trying to figure out if it's necessary. As far as I can tell, the subauthentication routine and filter allow for hooking or customizing the standard LSA MSV1_0 logon event processing. The issue is that I don't understand why the vendor's product would need these capabilities. I've asked them and they said they use it to perform impersonation. The product definitely does need to do impersonation, but based on my limited win32 knowledge, they could get the functionality they need using the normal auth APIs (LsaLogonUser, ImpersonateLoggedOnUser, etc) without the subauthentication package. Furthermore, I've worked with a number of similar products that all do impersonation, and this is the only one that's used a subauthentication package. If you're wondering why I would care, a previous version of the product had a bug in the subauthentication package dll that would cause lockups or bluescreens. That makes me rather nervous and has me questioning the use of such a low-level, kernel sensitive interface. I'd like to go back to the vendor and say "There's no way you could need an LSA subauth package for impersonation - take it out", but I'm not sure I understand the use cases and possible limitations of the standard win32 authentication/impersonation APIs well enough to make that claim definitively. So, to the win32 security gurus out there, is there any reason you would need an LSA MSV1_0 subauthentication package if all you were doing is impersonation? Thanks in advance for any thoughts!

  Read the article

• Red Box is not working

  - by palani

  Hi , I have install the Red box plugin by using the following command script/plugin install svn://rubyforge.org/var/svn/ambroseplugins/redbox . It installed successfully. and again ran the following command the following location /myapp/vendor/plugin/redbox/rake update_scripts . It shows me the following output (in /myapp/vendor/plugins/redbox) rake aborted! private method `copy' called for File:Class /home/myapp/vendor/plugins/redbox/Rakefile:28 (See full trace by running task with --trace) I don't know How to solve this ... Then i understand that "rake update_scripts" copying the Js and Css file only. so i manually copied the Redbox.js & redbox.css files into the respective places under /public folder I include the follwoing into my application.html.erb <%= stylesheet_link_tag 'redbox' % <%= javascript_include_tag :defaults % <%= javascript_include_tag 'redbox' % It included in the page successfully. The following is my view code : <%= link_to_remote_redbox('Red_box', :url = {:action= 'log'} ,:method ='get') % The popup box doesn't appear. I have no clue what is the exact error. Is that any Jquery clash? Please help me

  Read the article

• Trying to find USB device on iphone with IOKit.framework

  - by HuGeek

  Hi all, i'm working on a project were i need the usb port to communicate with a external device. I have been looking for exemple on the net (Apple and /developer/IOKit/usb exemple) and trying some other but i can't even find the device. In my code i blocking at the place where the fucntion looks for a next iterator (pointer in fact) with the function getNextIterator but never returns a good value so the code is blocking. By the way i am using toolchain and added IOKit.framework in my project. All i what right now is the communicate or do like a ping to someone on the USB bus!! I blocking in the 'FindDevice'....i can't manage to enter in the while because the variable usbDevice is always = to 0....i have tested my code in a small mac program and it works... Thanks Here is my code : IOReturn ConfigureDevice(IOUSBDeviceInterface **dev) { UInt8 numConfig; IOReturn result; IOUSBConfigurationDescriptorPtr configDesc; //Get the number of configurations result = (*dev)->GetNumberOfConfigurations(dev, &numConfig); if (!numConfig) { return -1; } // Get the configuration descriptor result = (*dev)->GetConfigurationDescriptorPtr(dev, 0, &configDesc); if (result) { NSLog(@"Couldn't get configuration descriptior for index %d (err=%08x)\n", 0, result); return -1; } ifdef OSX_DEBUG NSLog(@"Number of Configurations: %d\n", numConfig); endif // Configure the device result = (*dev)->SetConfiguration(dev, configDesc->bConfigurationValue); if (result) { NSLog(@"Unable to set configuration to value %d (err=%08x)\n", 0, result); return -1; } return kIOReturnSuccess; } IOReturn FindInterfaces(IOUSBDeviceInterface *dev, IOUSBInterfaceInterface **itf) { IOReturn kr; IOUSBFindInterfaceRequest request; io_iterator_t iterator; io_service_t usbInterface; IOUSBInterfaceInterface **intf = NULL; IOCFPlugInInterface **plugInInterface = NULL; HRESULT res; SInt32 score; UInt8 intfClass; UInt8 intfSubClass; UInt8 intfNumEndpoints; int pipeRef; CFRunLoopSourceRef runLoopSource; NSLog(@"Debut FindInterfaces \n"); request.bInterfaceClass = kIOUSBFindInterfaceDontCare; request.bInterfaceSubClass = kIOUSBFindInterfaceDontCare; request.bInterfaceProtocol = kIOUSBFindInterfaceDontCare; request.bAlternateSetting = kIOUSBFindInterfaceDontCare; kr = (*dev)->CreateInterfaceIterator(dev, &request, &iterator); usbInterface = IOIteratorNext(iterator); IOObjectRelease(iterator); NSLog(@"Interface found.\n"); kr = IOCreatePlugInInterfaceForService(usbInterface, kIOUSBInterfaceUserClientTypeID, kIOCFPlugInInterfaceID, &plugInInterface, &score); kr = IOObjectRelease(usbInterface); // done with the usbInterface object now that I have the plugin if ((kIOReturnSuccess != kr) || !plugInInterface) { NSLog(@"unable to create a plugin (%08x)\n", kr); return -1; } // I have the interface plugin. I need the interface interface res = (*plugInInterface)->QueryInterface(plugInInterface, CFUUIDGetUUIDBytes(kIOUSBInterfaceInterfaceID), (LPVOID*) &intf); (*plugInInterface)->Release(plugInInterface); // done with this if (res || !intf) { NSLog(@"couldn't create an IOUSBInterfaceInterface (%08x)\n", (int) res); return -1; } // Now open the interface. This will cause the pipes to be instantiated that are // associated with the endpoints defined in the interface descriptor. kr = (*intf)->USBInterfaceOpen(intf); if (kIOReturnSuccess != kr) { NSLog(@"unable to open interface (%08x)\n", kr); (void) (*intf)->Release(intf); return -1; } kr = (*intf)->CreateInterfaceAsyncEventSource(intf, &runLoopSource); if (kIOReturnSuccess != kr) { NSLog(@"unable to create async event source (%08x)\n", kr); (void) (*intf)->USBInterfaceClose(intf); (void) (*intf)->Release(intf); return -1; } CFRunLoopAddSource(CFRunLoopGetCurrent(), runLoopSource, kCFRunLoopDefaultMode); if (!intf) { NSLog(@"Interface is NULL!\n"); } else { *itf = intf; } NSLog(@"End of FindInterface \n \n"); return kr; } unsigned int FindDevice(void *refCon, io_iterator_t iterator) { kern_return_t kr; io_service_t usbDevice; IOCFPlugInInterface **plugInInterface = NULL; HRESULT result; SInt32 score; UInt16 vendor; UInt16 product; UInt16 release; unsigned int count = 0; NSLog(@"Searching Device....\n"); while (usbDevice = IOIteratorNext(iterator)) { // create intermediate plug-in NSLog(@"Found a device!\n"); kr = IOCreatePlugInInterfaceForService(usbDevice, kIOUSBDeviceUserClientTypeID, kIOCFPlugInInterfaceID, &plugInInterface, &score); kr = IOObjectRelease(usbDevice); if ((kIOReturnSuccess != kr) || !plugInInterface) { NSLog(@"Unable to create a plug-in (%08x)\n", kr); continue; } // Now create the device interface result = (*plugInInterface)->QueryInterface(plugInInterface, CFUUIDGetUUIDBytes(kIOUSBDeviceInterfaceID), (LPVOID)&dev); // Don't need intermediate Plug-In Interface (*plugInInterface)->Release(plugInInterface); if (result || !dev) { NSLog(@"Couldn't create a device interface (%08x)\n", (int)result); continue; } // check these values for confirmation kr = (*dev)->GetDeviceVendor(dev, &vendor); kr = (*dev)->GetDeviceProduct(dev, &product); //kr = (*dev)->GetDeviceReleaseNumber(dev, &release); //if ((vendor != LegoUSBVendorID) || (product != LegoUSBProductID) || (release != LegoUSBRelease)) { if ((vendor != LegoUSBVendorID) || (product != LegoUSBProductID)) { NSLog(@"Found unwanted device (vendor = %d != %d, product = %d != %d, release = %d)\n", vendor, kUSBVendorID, product, LegoUSBProductID, release); (void) (*dev)-Release(dev); continue; } // Open the device to change its state kr = (*dev)->USBDeviceOpen(dev); if (kr == kIOReturnSuccess) { count++; } else { NSLog(@"Unable to open device: %08x\n", kr); (void) (*dev)->Release(dev); continue; } // Configure device kr = ConfigureDevice(dev); if (kr != kIOReturnSuccess) { NSLog(@"Unable to configure device: %08x\n", kr); (void) (*dev)->USBDeviceClose(dev); (void) (*dev)->Release(dev); continue; } break; } return count; } // USB rcx Init IOUSBInterfaceInterface** osx_usb_rcx_init (void) { CFMutableDictionaryRef matchingDict; kern_return_t result; IOUSBInterfaceInterface **intf = NULL; unsigned int device_count = 0; // Create master handler result = IOMasterPort(MACH_PORT_NULL, &gMasterPort); if (result || !gMasterPort) { NSLog(@"ERR: Couldn't create master I/O Kit port(%08x)\n", result); return NULL; } else { NSLog(@"Created Master Port.\n"); NSLog(@"Master port 0x:08X \n \n", gMasterPort); } // Set up the matching dictionary for class IOUSBDevice and its subclasses matchingDict = IOServiceMatching(kIOUSBDeviceClassName); if (!matchingDict) { NSLog(@"Couldn't create a USB matching dictionary \n"); mach_port_deallocate(mach_task_self(), gMasterPort); return NULL; } else { NSLog(@"USB matching dictionary : %08X \n", matchingDict); } CFDictionarySetValue(matchingDict, CFSTR(kUSBVendorID), CFNumberCreate(kCFAllocatorDefault, kCFNumberShortType, &LegoUSBVendorID)); CFDictionarySetValue(matchingDict, CFSTR(kUSBProductID), CFNumberCreate(kCFAllocatorDefault, kCFNumberShortType, &LegoUSBProductID)); result = IOServiceGetMatchingServices(gMasterPort, matchingDict, &gRawAddedIter); matchingDict = 0; // this was consumed by the above call // Iterate over matching devices to access already present devices NSLog(@"RawAddedIter : 0x:%08X \n", &gRawAddedIter); device_count = FindDevice(NULL, gRawAddedIter); if (device_count == 1) { result = FindInterfaces(dev, &intf); if (kIOReturnSuccess != result) { NSLog(@"unable to find interfaces on device: %08x\n", result); (*dev)-USBDeviceClose(dev); (*dev)-Release(dev); return NULL; } // osx_usb_rcx_wakeup(intf); return intf; } else if (device_count 1) { NSLog(@"too many matching devices (%d) !\n", device_count); } else { NSLog(@"no matching devices found\n"); } return NULL; } int main(int argc, char *argv[]) { int returnCode; NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; NSLog(@"Debut du programme \n \n"); osx_usb_rcx_init(); NSLog(@"Fin du programme \n \n"); return 0; // returnCode = UIApplicationMain(argc, argv, @"Untitled1App", @"Untitled1App"); // [pool release]; // return returnCode; }

  Read the article

• TCL TDom: Looping through Objects

  - by pws5068

  Using TDom, I would like to cycle through a list of objects in the following format: <object> <type>Hardware</type> <name>System Name</name> <description>Basic Description of System.</description> <attributes> <vendor>Dell</vendor> <contract>MM/DD/YY</contract> <supportExpiration>MM/DD/YY</supportExpiration> <location>Building 123</location> <serial>xxx-xxx-xxxx</serial> <mac>some-mac-address</mac> </attributes> </object> <object> <type>Software</type> <name>Second Object</name> ... Then I use TDom to make a list of objects: set dom [dom parse $xml] set doc [$dom documentElement] set nodeList [$doc selectNodes /systems/object] So far I've done this to (theoretically) select every "Object" node from the list. How can I loop through them? Is it just: foreach node $nodeList { For each object, I need to retrieve the association of each attribute. From the example, I need to remember that the "name" is "System Name", "vendor" is "Dell", etc. I'm new to TCL but in other languages I would use an object or an associative list to store these. Is this possible? Can you show me an example of the syntax to select an attribute in this manner?

  Read the article

• Posting XML form data to a RESTful Server with Javascript or PHP

  - by pjs-worker

  Hi folks, I've been given the task of posting to a RESTful server. I'm new to the official "REST" but I've played with the concept before. However, this time I have an XML Payload example file that I am supposed to post. I'm struggling to figure out how the two relate. Can you help? Right now I can post to a specific site, say www.pcpost.com/schema/Application I can generate the URL for the inital, ie: postApplication?userid=4&... Being relatively new to web programming, I find that don't know how to take the following and interface it with the server. I'm at least familiar with Javascript and PHP. If this is impossible with those two types, I can learn whatever would be best. Thanks for your help on this. C <?xml version=\"1.0\" ?> <Application xmlns="http://www.pcpost.com/schema/Application" SchemaVersion="1.0" ProgramId="8" ApplicationDate="2009-08-29"> <Vendors> <Vendor Role="Applicant" Company="Test Company" Contact="Smith, John"/> <Vendor Role="Seller" Company="Test Company" Contact="Doe, Jane"/> <Vendor Role="Installer" Company="Test Company" Contact="Funk, Carl"/> </Vendors> <Participants> <Participant TaxStatus="Individual" Sector="Commercial"> <Roles> <Role>Host Customer</Role> </Roles> </Participants> </Application>

  Read the article

• Rails - strip xml import from whitespace and line break

  - by val_to_many

  Hey folks, I am stuck with something quite simple but really annoying: I have an xml file with one node, where the content includes line breaks and whitspaces. Sadly I can't change the xml. <?xml version="1.0" encoding="utf-8" ?> <ProductFeed> ACME Ltd. Fooproduct Foo Root :: Bar Category I get to the node and can read from it without trouble: url = "http://feeds.somefeed/feed.xml.gz" @source = open((url), :http_basic_authentication=>["USER", "PW"]) @gz = Zlib::GzipReader.new(@source) @result = @gz.read @doc = Nokogiri::XML(@result) @doc.xpath("/ProductFeed/Vendors/Vendor").each do |manuf| vendor = manuf.css("Name").first.text manuf.xpath("//child::Product").each do |product| product_name = product.css("Name").text foocat = product.css("Category").text puts "#{vendor} ---- #{product_name} ---- #{foocat} " end end This results in: ACME Ltd. ---- Fooproduct ---- Foo Root :: Bar Category Obviously there are line breaks and tab stops or spaces in the string returned by product.css("Category").text. Does anyone know how to strip the result from linebreaks and taps or spaces right here? Alternatively I could do that in the next step, where I do a find on 'foocat' like barcat = Category.find_by_foocat(foocat) Thanks for helping! Val

  Read the article

• Have I found a security problem in an API or do I just not understand SSL?

  - by jamieb

  I'm working on building a set of Python bindings around an XML-based API provided by a vendor. The vendor requires that all transactions be conducted over SSL. Using a Linux box, I created a key file and a CSR for my application. Using their self-service web portal, I then generate a certificate using that CSR. Both the key file and the certificate are used when making the SSL request to the API. I'm now working on designing exception classes to make error messages more verbose (and, hopefully, more useful to developers using my bindings). Part of my testing has included altering the key file: transpose a couple characters here, replace 4 or 5 with random characters there, etc. To my surprise, altering the key file had no effect! As long as I didn't change the total length of it, the API didn't complain about a bad key file. The only way I was able to throw an error was by swapping in a completely different key from another application. At that point, the API complained about the Common Name not matching. Is this normal behavior or has the vendor not properly implemented SSL?

  Read the article

• Unit Testing a rails 2.3.5 plugin

  - by brad

  I'm writing a new plugin for a rails 2.3.5 app. I've included an app directory (which makes it an engine) so i can easily load some extra routes. Not sure if that affects anything. Anyway, in the test directory i have two files: test_helper.rb and my_plugin_test.rb These files were generated automatically using script/generate plugin my_plugin When I go to vendor/plugins/my_plugin directory and run rake test they don't seem to run. I get the following console output: (in /Users/me/Repos/my_app/source/trunk/vendor/plugins/my_plugin) /Users/me/.rvm/rubies/jruby-1.4.0/bin/jruby -I"lib:lib:test" "/Users/me/.rvm/gems/jruby-1.4.0/gems/rake-0.8.7/lib/rake/rake_test_loader.rb" "test/my_plugin_test.rb" So it obviously sees my test file, but none of the tests inside get run, I just get back to my console prompt. What am I missing here? I figured the generated code would work out of the box Here are the two files test_helper.rb require 'rubygems' require 'active_support' require 'active_support/test_case' my_plugin_test.rb require 'test_helper' class MyPluginTest < ActiveSupport::TestCase # Replace this with your real tests. test "the truth" do assert true end test "Factories are supported" do assert_not_nil Factory end end File structure vendor - plugins - my_plugin - app - config - routes.rb - generators - my_plugin - some generator files.rb - lib - my_plugin.rb - my_plugin - my_plugin_lib_file.rb - rails - init.rb - Rakefile - tasks - my_plugin_tasks.rake - test - test_helper.rb - my_plugin_test.rb

  Read the article

• Correct way to generate order numbers in SQL Server

  - by Anton Gogolev

  This question certainly applies to a much broader scope, but here it is. I have a basic ecommerce app, where users can, naturally enough, place orders. Said orders need to have a unique number, which I'm trying to generate right now. Each order is Vendor-specific. Basically, I have an OrderNumberInfo (VendorID, OrderNumber) table. Now whenever a customer places an order I need to increment OrderNumber for a particuar Vendor and return that value. Naturally, I don't want other processes to interfere with me, so I need to exclusively lock this row somehow: begin tranaction declare @n int select @n = OrderNumber from OrderNumberInfo where VendorID = @vendorID update OrderNumberInfo set OrderNumber = @n + 1 where OrderNumber = @n and VendorID = @vendorID commit transaction Now, I've read about select ... with (updlock rowlock), pessimistic locking, etc., but just cannot fit all this in a coherent picture: How do these hints play with SQL Server 2008s' snapshot isolation? Do they perform row-level, page-level or even table-level locks? How does this tolerate multiple users trying to generate numbers for a single Vendor? What isolation levels are appropriate here? And generally - what is the way to do such things?

  Read the article

• no such file to load -- for several gems unpacked in a Rails 2.3.8 app

  - by vincentp

  Hi, I unpacked several gems into the /vendor/gems folder, and I get the same error message for 5 of these gems when I try to start my Rails application. The date-performance one as an example : no such file to load -- date_performance.so /opt/ruby-enterprise-1.8.7-20090928/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' /opt/ruby-enterprise-1.8.7-20090928/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' /opt/ruby-enterprise-1.8.7-20090928/lib/ruby/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' /opt/ruby-enterprise-1.8.7-20090928/lib/ruby/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' /opt/ruby-enterprise-1.8.7-20090928/lib/ruby/gems/1.8/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' /path_to_my_app/vendor/gems/date-performance-0.4.8/lib/date/performance.rb:34 ... Here is the line 34 : require 'date_performance.so' I'm including the gem using the following code : config.gem "date-performance", :lib => "date/performance" The '.so' file is under /path_to_my_app/vendor/gems/date-performance-0.4.8/lib/ Any idea on why things were working while the gems were not unpacked? Do you have any idea about this behavior? I'm using : Rails 2.3.8 REE 1.8.7 gem 1.3.6 Mac OS X Thanks! Vincent

  Read the article

• Why is Java EE 6 better than Spring ?

  - by arungupta

  Java EE 6 was released over 2 years ago and now there are 14 compliant application servers. In all my talks around the world, a question that is frequently asked is Why should I use Java EE 6 instead of Spring ? There are already several blogs covering that topic: Java EE wins over Spring by Bill Burke Why will I use Java EE instead of Spring in new Enterprise Java projects in 2012 ? by Kai Waehner (more discussion on TSS) Spring to Java EE migration (Part 1 and 2, 3 and 4 coming as well) by David Heffelfinger Spring to Java EE - A Migration Experience by Lincoln Baxter Migrating Spring to Java EE 6 by Bert Ertman and Paul Bakker at NLJUG Moving from Spring to Java EE 6 - The Age of Frameworks is Over at TSS Java EE vs Spring Shootout by Rohit Kelapure and Reza Rehman at JavaOne 2011 Java EE 6 and the Ewoks by Murat Yener Definite excuse to avoid Spring forever - Bert Ertman and Arun Gupta I will try to share my perspective in this blog. First of all, I'd like to start with a note: Thank you Spring framework for filling the interim gap and providing functionality that is now included in the mainstream Java EE 6 application servers. The Java EE platform has evolved over the years learning from frameworks like Spring and provides all the functionality to build an enterprise application. Thank you very much Spring framework! While Spring was revolutionary in its time and is still very popular and quite main stream in the same way Struts was circa 2003, it really is last generation's framework - some people are even calling it legacy. However my theory is "code is king". So my approach is to build/take a simple Hello World CRUD application in Java EE 6 and Spring and compare the deployable artifacts. I started looking at the official tutorial Developing a Spring Framework MVC Application Step-by-Step but it is using the older version 2.5. I wasn't able to find any updated version in the current 3.1 release. Next, I downloaded Spring Tool Suite and thought that would provide some template samples to get started. A least a quick search did not show any handy tutorials - either video or text-based. So I searched and found a link to their SVN repository at src.springframework.org/svn/spring-samples/. I tried the "mvc-basic" sample and the generated WAR file was 4.43 MB. While it was named a "basic" sample it seemed to come with 19 different libraries bundled but it was what I could find: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/joda-time-jsptags-1.0.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar And it is not even using any database! The app deployed fine on GlassFish 3.1.2 but the "@Controller Example" link did not work as it was missing the context root. With a bit of tweaking I could deploy the application and assume that the account got created because no error was displayed in the browser or server log. Next I generated the WAR for "mvc-ajax" and the 5.1 MB WAR had 20 JARs (1 removed, 2 added): ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.6.4.jar./WEB-INF/lib/jackson-mapper-asl-1.6.4.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar 2 more JARs for just doing Ajax. Anyway, deploying this application gave the following error: Caused by: java.lang.NoSuchMethodError: org.codehaus.jackson.map.SerializationConfig.<init>(Lorg/codehaus/jackson/map/ClassIntrospector;Lorg/codehaus/jackson/map/AnnotationIntrospector;Lorg/codehaus/jackson/map/introspect/VisibilityChecker;Lorg/codehaus/jackson/map/jsontype/SubtypeResolver;)V    at org.springframework.samples.mvc.ajax.json.ConversionServiceAwareObjectMapper.<init>(ConversionServiceAwareObjectMapper.java:20)    at org.springframework.samples.mvc.ajax.json.JacksonConversionServiceConfigurer.postProcessAfterInitialization(JacksonConversionServiceConfigurer.java:40)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsAfterInitialization(AbstractAutowireCapableBeanFactory.java:407) Seems like some incorrect repos in the "pom.xml". Next one is "mvc-showcase" and the 6.49 MB WAR now has 28 JARs as shown below: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/aspectjrt-1.6.10.jar./WEB-INF/lib/commons-fileupload-1.2.2.jar./WEB-INF/lib/commons-io-2.0.1.jar./WEB-INF/lib/el-api-2.2.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.8.1.jar./WEB-INF/lib/jackson-mapper-asl-1.8.1.jar./WEB-INF/lib/javax.inject-1.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/jdom-1.0.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-api-1.2.jar./WEB-INF/lib/jstl-impl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/rome-1.0.0.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.1.0.RELEASE.jar./WEB-INF/lib/spring-asm-3.1.0.RELEASE.jar./WEB-INF/lib/spring-beans-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-support-3.1.0.RELEASE.jar./WEB-INF/lib/spring-core-3.1.0.RELEASE.jar./WEB-INF/lib/spring-expression-3.1.0.RELEASE.jar./WEB-INF/lib/spring-web-3.1.0.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.1.0.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar The app at least deployed and showed results this time. But still no database! Next I tried building "jpetstore" and got the error: [ERROR] Failed to execute goal on project org.springframework.samples.jpetstore:Could not resolve dependencies for project org.springframework.samples:org.springframework.samples.jpetstore:war:1.0.0-SNAPSHOT: Failed to collect dependencies for [commons-fileupload:commons-fileupload:jar:1.2.1 (compile), org.apache.struts:com.springsource.org.apache.struts:jar:1.2.9 (compile), javax.xml.rpc:com.springsource.javax.xml.rpc:jar:1.1.0 (compile), org.apache.commons:com.springsource.org.apache.commons.dbcp:jar:1.2.2.osgi (compile), commons-io:commons-io:jar:1.3.2 (compile), hsqldb:hsqldb:jar:1.8.0.7 (compile), org.apache.tiles:tiles-core:jar:2.2.0 (compile), org.apache.tiles:tiles-jsp:jar:2.2.0 (compile), org.tuckey:urlrewritefilter:jar:3.1.0 (compile), org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-orm:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-context-support:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework.webflow:spring-js:jar:2.0.7.RELEASE (compile), org.apache.ibatis:com.springsource.com.ibatis:jar:2.3.4.726 (runtime), com.caucho:com.springsource.com.caucho:jar:3.2.1 (compile), org.apache.axis:com.springsource.org.apache.axis:jar:1.4.0 (compile), javax.wsdl:com.springsource.javax.wsdl:jar:1.6.1 (compile), javax.servlet:jstl:jar:1.2 (runtime), org.aspectj:aspectjweaver:jar:1.6.5 (compile), javax.servlet:servlet-api:jar:2.5 (provided), javax.servlet.jsp:jsp-api:jar:2.1 (provided), junit:junit:jar:4.6 (test)]: Failed to read artifact descriptor for org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT: Could not transfer artifact org.springframework:spring-webmvc:pom:3.0.0.BUILD-SNAPSHOT from/to JBoss repository (http://repository.jboss.com/maven2): Access denied to: http://repository.jboss.com/maven2/org/springframework/spring-webmvc/3.0.0.BUILD-SNAPSHOT/spring-webmvc-3.0.0.BUILD-SNAPSHOT.pom It appears the sample is broken - maybe I was pulling from the wrong repository - would be great if someone were to point me at a good target to use here. With a 50% hit on samples in this repository, I started searching through numerous blogs, most of which have either outdated information (using XML-heavy Spring 2.5), some piece of configuration (which is a typical "feature" of Spring) is missing, or too much complexity in the sample. I finally found this blog that worked like a charm. This blog creates a trivial Spring MVC 3 application using Hibernate and MySQL. This application performs CRUD operations on a single table in a database using typical Spring technologies.  I downloaded the sample code from the blog, deployed it on GlassFish 3.1.2 and could CRUD the "person" entity. The source code for this application can be downloaded here. More details on the application statistics below. And then I built a similar CRUD application in Java EE 6 using NetBeans wizards in a couple of minutes. The source code for the application can be downloaded here and the WAR here. The Spring Source Tool Suite may also offer similar wizard-driven capabilities but this blog focus primarily on comparing the runtimes. The lack of STS tutorials was slightly disappointing as well. NetBeans however has tons of text-based and video tutorials and tons of material even by the community. One more bit on the download size of tools bundle ... NetBeans 7.1.1 "All" is 211 MB (which includes GlassFish and Tomcat) Spring Tool Suite  2.9.0 is 347 MB (~ 65% bigger) This blog is not about the tooling comparison so back to the Java EE 6 version of the application .... In order to run the Java EE version on GlassFish, copy the MySQL Connector/J to glassfish3/glassfish/domains/domain1/lib/ext directory and create a JDBC connection pool and JDBC resource as: ./bin/asadmin create-jdbc-connection-pool --datasourceclassname \\ com.mysql.jdbc.jdbc2.optional.MysqlDataSource --restype \\ javax.sql.DataSource --property \\ portNumber=3306:user=mysql:password=mysql:databaseName=mydatabase \\ myConnectionPool ./bin/asadmin create-jdbc-resource --connectionpoolid myConnectionPool jdbc/myDataSource I generated WARs for the two projects and the table below highlights some differences between them: Java EE 6 Spring WAR File Size 0.021030 MB 10.87 MB (~516x) Number of files 20 53 (> 2.5x) Bundled libraries 0 36 Total size of libraries 0 12.1 MB XML files 3 5 LoC in XML files 50 (11 + 15 + 24) 129 (27 + 46 + 16 + 11 + 19) (~ 2.5x) Total .properties files 1 Bundle.properties 2 spring.properties, log4j.properties Cold Deploy 5,339 ms 11,724 ms Second Deploy 481 ms 6,261 ms Third Deploy 528 ms 5,484 ms Fourth Deploy 484 ms 5,576 ms Runtime memory ~73 MB ~101 MB Some points worth highlighting from the table ... 516x WAR file, 10x deployment time - With 12.1 MB of libraries (for a very basic application) bundled in your application, the WAR file size and the deployment time will naturally go higher. The WAR file for Spring-based application is 516x bigger and the deployment time is double during the first deployment and ~ 10x during subsequent deployments. The Java EE 6 application is fully portable and will run on any Java EE 6 compliant application server. 36 libraries in the WAR - There are 14 Java EE 6 compliant application servers today. Each of those servers provide all the functionality like transactions, dependency injection, security, persistence, etc typically required of an enterprise or web application. There is no need to bundle 36 libraries worth 12.1 MB for a trivial CRUD application. These 14 compliant application servers provide all the functionality baked in. Now you can also deploy these libraries in the container but then you don't get the "portability" offered by Spring in that case. Does your typical Spring deployment actually do that ? 3x LoC in XML - The number of XML files is about 1.6x and the LoC is ~ 2.5x. So much XML seems circa 2003 when the Java language had no annotations. The XML files can be further reduced, e.g. faces-config.xml can be replaced without providing i18n, but I just want to compare stock applications. Memory usage - Both the applications were deployed on default GlassFish 3.1.2 installation and any additional memory consumed as part of deployment/access was attributed to the application. This is by no means scientific but at least provides an initial ballpark. This area definitely needs more investigation. Another table that compares typical Java EE 6 compliant application servers and the custom-stack created for a Spring application ... Java EE 6 Spring Web Container ? 53 MB (tcServer 2.6.3 Developer Edition) Security ? 12 MB (Spring Security 3.1.0) Persistence ? 6.3 MB (Hibernate 4.1.0, required) Dependency Injection ? 5.3 MB (Framework) Web Services ? 796 KB (Spring WS 2.0.4) Messaging ? 3.4 MB (RabbitMQ Server 2.7.1) 936 KB (Java client 936) OSGi ? 1.3 MB (Spring OSGi 1.2.1) GlassFish and WebLogic (starting at 33 MB) 83.3 MB There are differentiating factors on both the stacks. But most of the functionality like security, persistence, and dependency injection is baked in a Java EE 6 compliant application server but needs to be individually managed and patched for a Spring application. This very quickly leads to a "stack explosion". The Java EE 6 servers are tested extensively on a variety of platforms in different combinations whereas a Spring application developer is responsible for testing with different JDKs, Operating Systems, Versions, Patches, etc. Oracle has both the leading OSS lightweight server with GlassFish and the leading enterprise Java server with WebLogic Server, both Java EE 6 and both with lightweight deployment options. The Web Container offered as part of a Java EE 6 application server not only deploys your enterprise Java applications but also provide operational management, diagnostics, and mission-critical capabilities required by your applications. The Java EE 6 platform also introduced the Web Profile which is a subset of the specifications from the entire platform. It is targeted at developers of modern web applications offering a reasonably complete stack, composed of standard APIs, and is capable out-of-the-box of addressing the needs of a large class of Web applications. As your applications grow, the stack can grow to the full Java EE 6 platform. The GlassFish Server Web Profile starting at 33MB (smaller than just the non-standard tcServer) provides most of the functionality typically required by a web application. WebLogic provides battle-tested functionality for a high throughput, low latency, and enterprise grade web application. No individual managing or patching, all tested and commercially supported for you! Note that VMWare does have a server, tcServer, but it is non-standard and not even certified to the level of the standard Web Profile most customers expect these days. Customers who choose this risk proprietary lock-in since VMWare does not seem to want to formally certify with either Java EE 6 Enterprise Platform or with Java EE 6 Web Profile but of course it would be great if they were to join the community and help their customers reduce the risk of deploying on VMWare software. Some more points to help you decide choose between Java EE 6 and Spring ... Freedom to choose container - There are 14 Java EE 6 compliant application servers today, with a variety of open source and commercial offerings. A Java EE 6 application can be deployed on any of those containers. So if you deployed your application on GlassFish today and would like to scale up with your demands then you can deploy the same application to WebLogic. And because of the portability of a Java EE 6 application, you can even take it a different vendor altogether. Spring requires a runtime which could be any of these app servers as well. But why use Spring when all the required functionality is already baked into the application server itself ? Spring also has a different definition of portability where they claim to bundle all the libraries in the WAR file and move to any application server. But we saw earlier how bloated that archive could be. The equivalent features in Spring runtime offerings (mainly tcServer) are not all open source, not as mature, and often require manual assembly.  Vendor choice - The Java EE 6 platform is created using the Java Community Process where all the big players like Oracle, IBM, RedHat, and Apache are conritbuting to make the platform successful. Each application server provides the basic Java EE 6 platform compliance and has its own competitive offerings. This allows you to choose an application server for deploying your Java EE 6 applications. If you are not happy with the support or feature of one vendor then you can move your application to a different vendor because of the portability promise offered by the platform. Spring is a set of products from a single company, one price book, one support organization, one sustaining organization, one sales organization, etc. If any of those cause a customer headache, where do you go ? Java EE, backed by multiple vendors, is a safer bet for those that are risk averse. Production support - With Spring, typically you need to get support from two vendors - VMWare and the container provider. With Java EE 6, all of this is typically provided by one vendor. For example, Oracle offers commercial support from systems, operating systems, JDK, application server, and applications on top of them. VMWare certainly offers complete production support but do you really want to put all your eggs in one basket ? Do you really use tcServer ? ;-) Maintainability - With Spring, you are likely building your own distribution with multiple JAR files, integrating, patching, versioning, etc of all those components. Spring's claim is that multiple JAR files allow you to go à la carte and pick the latest versions of different components. But who is responsible for testing whether all these versions work together ? Yep, you got it, its YOU! If something does not work, who patches and maintains the JARs ? Of course, you! Commercial support for such a configuration ? On your own! The Java EE application servers manage all of this for you and provide a well-tested and commercially supported bundle. While it is always good to realize that there is something new and improved that updates and replaces older frameworks like Spring, the good news is not only does a Java EE 6 container offer what is described here, most also will let you deploy and run your Spring applications on them while you go through an upgrade to a more modern architecture. End result, you get the best of both worlds - keeping your legacy investment but moving to a more agile, lightweight world of Java EE 6. A message to the Spring lovers ... The complexity in J2EE 1.2, 1.3, and 1.4 led to the genesis of Spring but that was in 2004. This is 2012 and the name has changed to "Java EE 6" :-) There are tons of improvements in the Java EE platform to make it easy-to-use and powerful. Some examples: Adding @Stateless on a POJO makes it an EJB EJBs can be packaged in a WAR with no special packaging or deployment descriptors "web.xml" and "faces-config.xml" are optional in most of the common cases Typesafe dependency injection is now part of the Java EE platform Add @Path on a POJO allows you to publish it as a RESTful resource EJBs can be used as backing beans for Facelets-driven JSF pages providing full MVC Java EE 6 WARs are known to be kilobytes in size and deployed in milliseconds Tons of other simplifications in the platform and application servers So if you moved away from J2EE to Spring many years ago and have not looked at Java EE 6 (which has been out since Dec 2009) then you should definitely try it out. Just be at least aware of what other alternatives are available instead of restricting yourself to one stack. Here are some workshops and screencasts worth trying: screencast #37 shows how to build an end-to-end application using NetBeans screencast #36 builds the same application using Eclipse javaee-lab-feb2012.pdf is a 3-4 hours self-paced hands-on workshop that guides you to build a comprehensive Java EE 6 application using NetBeans Each city generally has a "spring cleanup" program every year. It allows you to clean up the mess from your house. For your software projects, you don't need to wait for an annual event, just get started and reduce the technical debt now! Move away from your legacy Spring-based applications to a lighter and more modern approach of building enterprise Java applications using Java EE 6. Watch this beautiful presentation that explains how to migrate from Spring -> Java EE 6: List of files in the Java EE 6 project: ./index.xhtml./META-INF./person./person/Create.xhtml./person/Edit.xhtml./person/List.xhtml./person/View.xhtml./resources./resources/css./resources/css/jsfcrud.css./template.xhtml./WEB-INF./WEB-INF/classes./WEB-INF/classes/Bundle.properties./WEB-INF/classes/META-INF./WEB-INF/classes/META-INF/persistence.xml./WEB-INF/classes/org./WEB-INF/classes/org/javaee./WEB-INF/classes/org/javaee/javaeemysql./WEB-INF/classes/org/javaee/javaeemysql/AbstractFacade.class./WEB-INF/classes/org/javaee/javaeemysql/Person.class./WEB-INF/classes/org/javaee/javaeemysql/Person_.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$1.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$PersonControllerConverter.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController.class./WEB-INF/classes/org/javaee/javaeemysql/PersonFacade.class./WEB-INF/classes/org/javaee/javaeemysql/util./WEB-INF/classes/org/javaee/javaeemysql/util/JsfUtil.class./WEB-INF/classes/org/javaee/javaeemysql/util/PaginationHelper.class./WEB-INF/faces-config.xml./WEB-INF/web.xml List of files in the Spring 3.x project: ./META-INF ./META-INF/MANIFEST.MF./WEB-INF./WEB-INF/applicationContext.xml./WEB-INF/classes./WEB-INF/classes/log4j.properties./WEB-INF/classes/org./WEB-INF/classes/org/krams ./WEB-INF/classes/org/krams/tutorial ./WEB-INF/classes/org/krams/tutorial/controller ./WEB-INF/classes/org/krams/tutorial/controller/MainController.class ./WEB-INF/classes/org/krams/tutorial/domain ./WEB-INF/classes/org/krams/tutorial/domain/Person.class ./WEB-INF/classes/org/krams/tutorial/service ./WEB-INF/classes/org/krams/tutorial/service/PersonService.class ./WEB-INF/hibernate-context.xml ./WEB-INF/hibernate.cfg.xml ./WEB-INF/jsp ./WEB-INF/jsp/addedpage.jsp ./WEB-INF/jsp/addpage.jsp ./WEB-INF/jsp/deletedpage.jsp ./WEB-INF/jsp/editedpage.jsp ./WEB-INF/jsp/editpage.jsp ./WEB-INF/jsp/personspage.jsp ./WEB-INF/lib ./WEB-INF/lib/antlr-2.7.6.jar ./WEB-INF/lib/aopalliance-1.0.jar ./WEB-INF/lib/c3p0-0.9.1.2.jar ./WEB-INF/lib/cglib-nodep-2.2.jar ./WEB-INF/lib/commons-beanutils-1.8.3.jar ./WEB-INF/lib/commons-collections-3.2.1.jar ./WEB-INF/lib/commons-digester-2.1.jar ./WEB-INF/lib/commons-logging-1.1.1.jar ./WEB-INF/lib/dom4j-1.6.1.jar ./WEB-INF/lib/ejb3-persistence-1.0.2.GA.jar ./WEB-INF/lib/hibernate-annotations-3.4.0.GA.jar ./WEB-INF/lib/hibernate-commons-annotations-3.1.0.GA.jar ./WEB-INF/lib/hibernate-core-3.3.2.GA.jar ./WEB-INF/lib/javassist-3.7.ga.jar ./WEB-INF/lib/jstl-1.1.2.jar ./WEB-INF/lib/jta-1.1.jar ./WEB-INF/lib/junit-4.8.1.jar ./WEB-INF/lib/log4j-1.2.14.jar ./WEB-INF/lib/mysql-connector-java-5.1.14.jar ./WEB-INF/lib/persistence-api-1.0.jar ./WEB-INF/lib/slf4j-api-1.6.1.jar ./WEB-INF/lib/slf4j-log4j12-1.6.1.jar ./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-jdbc-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-orm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-tx-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar ./WEB-INF/lib/standard-1.1.2.jar ./WEB-INF/lib/xml-apis-1.0.b2.jar ./WEB-INF/spring-servlet.xml ./WEB-INF/spring.properties ./WEB-INF/web.xml So, are you excited about Java EE 6 ? Want to get started now ? Here are some resources: Java EE 6 SDK (including runtime, samples, tutorials etc) GlassFish Server Open Source Edition 3.1.2 (Community) Oracle GlassFish Server 3.1.2 (Commercial) Java EE 6 using WebLogic 12c and NetBeans (Video) Java EE 6 with NetBeans and GlassFish (Video) Java EE with Eclipse and GlassFish (Video)

  Read the article

• HP D2D 4312 Bacula configuration

  - by krisdigitx

  I have configured 5 libraries on the HP D2D system Discovery on the Bacula server shows only the last library and not all libraries. Why? [root@server bacula]# iscsiadm --mode discovery --type sendtargets --portal 10.66.59.114 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dca5e.library12.drive1 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dcaf2.library12.robotics I can query it fine using... [root@server bacula]# mtx -f /dev/sg2 inquiry Product Type: Tape Drive Vendor ID: 'HP ' Product ID: 'Ultrium 5-SCSI ' Revision: 'ED51' Attached Changer API: No [root@bray bacula]# mtx -f /dev/sg3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'MSL G3 Series ' Revision: 'EL41' Attached Changer API: No [root@server bacula]# mtx -f /dev/sg3 status Storage Changer /dev/sg3:1 Drives, 97 Slots ( 1 Import/Export ) Data Transfer Element 0:Empty Storage Element 1:Full :VolumeTag=50507F82 Storage Element 2:Full :VolumeTag=50507F83 Storage Element 3:Full :VolumeTag=50507F84 Storage Element 4:Full :VolumeTag=50507F85 Storage Element 5:Full :VolumeTag=50507F86 Storage Element 6:Full :VolumeTag=50507F87 Storage Element 7:Full :VolumeTag=50507F88 Does anyone have any good documentation for implementing Bacula with an HP D2D tape drive for server backups, and how to allocate libraries?

  Read the article

• Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

  - by leeand00

  Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

  Read the article

• Inexpensive and Open replacement for Cisco Tunnel-based EasyVPN with Cisco VPN 3000 Series

  - by Shoaibi

  I have a scenario when i have to establish peer-to-peer preshared key based VPN to a vendor. This vendor uses Cisco EasyVPN with Cisco VPN 3000 as access concentrator. I check the compatibility of the type of VPN from http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/prod_brochure0900aecd80582078.pdf and it appears that it would only work on cisco hardware. I am looking for a less inexpensive and possibly and open replacement to this to save my cost and also recommend to them. I have tried OpenVPN and thinking about vyatta.

  Read the article

• Windows XP/7: custom routing for VPN connection

  - by Peter Becker

  We are dealing with a badly configured VPN connection from a vendor, which set up the default gateway but doesn't route traffic anywhere beyond their VPN zone. I managed to do some ad-hoc routing to configure a computer in a way that it can reach the vendor's VPN, our local network as well as the internet. I then tried to turn this into a script, but that failed since the interface number of the VPN changes on every connection. Is there a way in Windows XP and/or Windows 7 to configure custom routing on the client side of a VPN connection? What I would like to do is to have a script running just after the connection comes up that changes the routing table (similar to an ifup script on UNIX).

  Read the article

• Basic networking problem with Ubuntu 9.04 on Acer Extensa 5635Z laptop

  - by sapporo

  I just installed Ubuntu 9.04 on a brand new Acer Extensa 5635Z laptop, but ethernet networking does't work (wireless doesn't work either, but I'd be happy with ethernet for now). eth0 isn't listed in /etc/network/interfaces: $ cat /etc/network/interfaces auto lo iface lo inet loopback lshw does show the nic, but I can't make much sense out of the information: $ sudo lshw -class network -sanitize *-network DISABLED description: Wireless interface product: AR928X Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:07:00.0 logical name: wmaster0 version: 01 serial: [REMOVED] width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath9k latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-network UNCLAIMED description: Ethernet controller product: Attansic Technology Corp. vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:09:00.0 version: c0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list configuration: latency=0 *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: [REMOVED] capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes Thanks for your help!

  Read the article

• Can't access USB drive anymore

  - by marie

  I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >