Search Results

Search found 7992 results on 320 pages for 'hp power protector'.

Page 16/320 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Enable VT-x in HP 8300 elite

  - by lang2

  I have a HP 8300 elite (Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz). I'm trying to run a virtual machine via VirtualBox. But every time I start the VM, it says: VT-x is disabled in the BIOS. (VERR_VMX_MSR_VMXON_DISABLED). My lscpu output is like this: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 58 Stepping: 9 CPU MHz: 1600.000 BogoMIPS: 6784.74 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 8192K NUMA node0 CPU(s): 0-7 I went into the BIOS but the things the can be tweaked is very limited and I couldn't find the VT-x setting. Anybody know how to do this in this setup?

  Read the article

• HP Pavilion: Sound problem after Windows Vista SP2 update

  - by Mehper C. Palavuzlar

  I have HP Pavilion dv-2051et notebook with Windows Vista Home Premium SP1. Recently the sound of my notebook completely went off and I poked up Windows sound settings and IDT HD Sound panel to bring it back, but to no avail (trust me, I looked at every setting). Then I made a system restore to the point located just before Vista SP2 was installed. The sounds came back. Afterwards, I installed Vista SP2 again, and the sounds went off again. SP2 installation causes complete loss of sounds of my notebook. What can I do to overcome this problem? I don't want to stay with SP1 but installing SP2 brings me a huge problem. Anyone experienced this lately? Any recommendations? Thanks in advance.

  Read the article

• Getting USB boot to work in SmartOS on HP ProLiant N40L

  - by user126579

  I recently downloaded SmartOS and tried running it on my HP ProLiant N40L, but it always fails on boot. After dd'ing the image to the USB stick, I plug it into the internal USB header and turn the machine on. After selecting from GRUB, it displays the following: , bss=0x0 It sits there for 2-4 minutes, then finally boots the OS and displays the following: WARNING: Couldn't read ACPI SRAT table from BIOS. lgrp support will be limited to one group. SunOS Release 5.11 Version joyent_20120614T184600Z 64-bit Copyright (c) 2010-2012, Joyent Inc. All rights reserved. WARNING: kvm: no hardware support After that, it hangs. I've tried this with two different USB sticks. I've seen some mentions on the SmartOS website about people running it on an N40L, booting from USB, so maybe it's just broken hardware? Has anyone gotten this working?

  Read the article

• HP Color LaserJet 2605dn color alignment issue

  - by robertvt

  We have a HP Color LaserJet 2605dn at work that recently lost its mind. The red and blue colors are offset from where they should be and producing a rather trippy 3D look. I've performed a manual calibration through the menus and poked at just about everything I could find. These toner cartridges are not new (as you can see they're about 50% used) but only just recently started this problem. They were working great up until this error appeared. It happens on mac, pc, and via the printer menu printouts so I don't think it's a driver problem. The printer has been restarted and reset and is running the newest firmware. Anyone have any ideas? Here's a pic http://img16.imageshack.us/img16/9984/photoon20090914at1149.jpg

  Read the article

• HP DL160 vs DL360 for virtualization

  - by Chris

  Hi, We're planning to consolidate our infrastructure (a dozen servers). We'll buy two or three identical new servers who will be setup as a XenServer pool. Load balancing and HA tools will monitor the pool and vMotion VMs in case of failure/overload. I know that the DL100 series of HP servers is cheaper than the DL300 serie (in every sense of the word). As we don't need local storage (we have a SAN) and can live with a temporary down server (provided that Xen Server HA tools work as advertized), what are the downsides going with the DL100 serie ? Thanks, Chris

  Read the article

• Does HP 8530w support Wifi 802.11n?

  - by FoxyBOA

  According to vendor site HP 8530w supports 802.11n draft mode. My Windows 7 tell me that network card is 5100 ABG and know nothing about N mode (guys from Intel forum mentioned, that 802.11N versions must ended with N letter, e.g. 5100 ABN). Not sure if it matter, but my laptop model id is #FU462EA. How could I check that my Wifi card compliant with 802.11n (I suspect that "draft N" could have two "special" meaning: doesn't work with 802.11n at all or requires special activation of the mode). Any hints are welcome.

  Read the article

• Recover an HP recovery partition

  - by eric.chartier

  I have a (semi)-dead hard drive with an HP recovery partition on it. My goal is to Buy a new hard drive Copy the recovery partition to a drive ( dd if=/dev/sdb1 of=~/recovery.bak ) Make a new partition of 12000 mb with Windows 7 Copy back recovery partition to the new drive ( dd if=~/recovery.bak of=/dev/sdb1 ) Then press F11 when the laptop boots. However, this doesn't work. Any idea why? Edit: I suspect the F11 doesn't work because the laptop tries to boot the laptop, because my partition is the primary partition of the drive. Does anyone have any experience dealing with stuff like this?

  Read the article

• HP-UX - custom rsync path

  - by stack_zen

  Hi. There are a range of HP-UX 11.11 hosts I'm unable to install rsync (I'm limited to a non-privileged user) I've extracted both rsync binary and libpopt.sl, libiconv.sl, libintl.sl from the depots into one of that user's directories: /home/zenith/rsync/ Problem is, I can't get my RH Linux box communicating with it: rsync -e --rsync-path=/home/zenith/rsync/rsync --compress=9 -pgtov --filter=+rs_/'*.log' --exclude='*' [email protected]:/home/zenith/service/logs/ /u01/rsync_depot/service/192.102.14.18/ /usr/lib/dld.sl: Can't find path for shared library: libintl.sl /usr/lib/dld.sl: No such file or directory sh: 1644 Abort(coredump) I've added to the remote host .profile export SHLIB_PATH=/usr/lib:/home/zenith/rsync export PATH=$PATH:/home/zenith/rsync but still, no libintl.sl is found. How can I initialize the correct env variable/ get this to work?

  Read the article

• Different block sizes for partition and underlying logical disk on HP Raid Controller (Linux)

  - by Wawrzek

  Following links collected in this thread I started to check blockdev and found the following output indicating different sizes for partition c0d9p1 and the underlying device (c0d9): [root@machine ~]# blockdev --report /dev/cciss/c0d9 RO RA SSZ BSZ StartSec Size Device rw 256 512 4096 0 3906963632 /dev/cciss/c0d9 [root@machine ~]# blockdev --report /dev/cciss/c0d9p1 RO RA SSZ BSZ StartSec Size Device rw 256 512 2048 1 3906959039 /dev/cciss/c0d9p1 We have a lot of small files, so yes the block size is smaller than normal. The device is a logical driver on an HP P410 raid controller, simple disk without any raid - RAID 0 on one disk to be precise. (Please note that above configuration is a feature not a bug). Therefore, I have the following questions. Can the above discrepancy in the block size affect disk performance? Can I control the block size using hpacucli?

  Read the article

• HP dv9000 Vista laptop won't boot from CD/DVD drive

  - by scottedwards2000

  My HP dv9000 Vista laptop recently got the BSOD with error 0x0000c1f5. The only way to fix this error is to be able to boot from CD/DVD and use some repair software I have. The problem is that the laptop REFUSES to boot from any CD/DVD I try. I've changed the boot order so the CD/DVD is first, and I can hear the drive spin up a bit upon power-up, but after a second, it spins down and then the laptop tries to boot from hard drive. Any ideas? (I've tried lots of CDs so it's not the media itself) Thanks much!

  Read the article

• 2 HP Procurve 4000M switches and Comcast SMC Gateway

  - by Cole Tierney

  We've got 2 HP Procurve 4000M switches joined by a trunk. Switch 1 is connected to a Cisco 2600 router which is connected to a T1. Internet traffic for hosts on switch 2 must pass through the trunk to switch 1. We're now switching to Comcast who's given us 4 port SMC router. I would like to connect each switch to the comcast router to reduce traffic on the trunk, but I don't want to create a loop. The switches support spanning tree protocol, but I don't know how this would work with the comcast router. Would a triangle network like this work? Thanks for any tips.

  Read the article

• HP MediaSmart server system disk full

  - by Blanthor

  I have a HP MediaSmart Server (EX 490) with Windows Home Server out of the box. It comes with a single 1.0 TB drive partioned 20 GB for the System disk. The system disk keeps filling up. I haven't installed anything but McAfee. Without getting into the philosophical discussions of why they would partition it thus, what is the likely culprit of this debacle? My D: Partition has plenty of space. I can get into the server only through Remote Desktop.

  Read the article

• What to do with a HP Itanium box ?

  - by VivekRJ

  One of my customers has a HP Itanium (Integrity Rx6600 I think) box. They want to use it for a running our apps (Linux based). I was initially hoping to put a ESXi on it and load Ubu 10.10 but I was surprised IA64 is declining : Windows discontinued support since 2008 Ubuntu 10.04 is last of support CentOS also unsure VMWare ESXi not supported What are people doing ? Are people running Ubuntu 10.04 on Itanium succesfully ? Also FreeBSD 8.2 says supports it - are they going to keep with the platform ?

  Read the article

• HP LaserJet Pro 400 Color M451dn Phantom Print Jobs

  - by francisswest

  Scenario: Multiple printers hooked up to a printer server (2008r2) including this HP LaserJet Pro 400 Color M451dn. All machines that are using the printer are based on Windows 7 Enterprise x64. Problem: Every couple of days the users who frequent this printer let me know that a few dozen pages with random characters down one side of the paper print out. This happens usually during the evening when no one is around to send print jobs to it. What I have done: Provided the below screen shot of the printer log with what I assume is the print jobs in question. I have looked into the printer driver compatibility and found no issues. Question: Is there a known issue with this printer or similar printers, and is there a solution that people are familiar with when they see multiple pages of gibberish printing out?

  Read the article

• Linear Performance Scalability with HP San Solutions

  - by Berzemus

  Hi all, I need a San Solution with linear scalability in size as well as in performance. From what I know, with a Modular Smart Array solution such as the P2000/MSA-class solutions from HP, even with a dual controller initial node, I can only increase the size of it, as added nodes come controller-less, so overall performance tends to decrease. On the other hand, the P4000 (lefthand) family of solutions has each of it's nodes have it's own controller, and so when a node is added, storage capacity as well as performance increase. Am I right in all that I say, and is the P4000 the only solution, or have I forgotten something ?

  Read the article

• HP Rapid Deployment - Change Data Store Path

  - by David Carreyette

  I am running HP Rapid Deployment (Altiris eXpress Deployment Server 6.9 - Build 164) on an inherited Windows Server 2003 SP2. I need to change the Data Store Path as the default is pointing to the C: drive and there is not enough space there. I would like to set it to the D: drive where there is plenty of space. Reading the documentation: Data store path: Specifies the path to stored packages and files and other DS functions (such as license verification). The default path is C:\Program files\Altiris\express\Deployment Server. Note: Do not use this setting to change the path to the Deployment Share. Modifying this setting does not automatically allow you to use another shared directory other than the express share. To change the Deployment Share shared directory, run a Custom install to establish another location for the Deployment Share. Is there any other way I can change the path as I do not have the install media?

  Read the article

• Server 2008 R2 - Cannot add HP UPD PCL 6 - Failed with error 0x000000002

  - by Rasmus

  I am having a problem with adding a print driver to one of our 2008 R2 RDS servers. On all other RDS servers in the farm there is no problem. The print server is 2008 R2. The HP Universal Print Driver PCL 6 is installed on the print server. When trying to add a printer with the driver on the failing RDS server i just get the error "Cannnot connect to the printer. Failed with errorcode 0x00000002" I have tried to add the driver to the RDS server localy but it fails with the same error. The driver has been installed before and is currently visible in the printmanagement.msc. When trying to remove the print driver i am unable to do it because it's "Currently in use" What to do? Have tried everyting - i think :-) Thanks. /Rasmus

  Read the article

• HP Proliant ML115 G5 - Boot order lost after reboot

  - by Filipe YaBa Polido

  I have one HP Proliant ML 115 G5 (AMD) with the latest BIOS (07-06-2009) and recently I've installed an USB disk. This is a common problem on old Proliant servers. When you plug the USB disk, BIOS boot order changes and tries to boot via USB. So, I'll change the BIOS settings and make the SATA disk the default boot device. The problem is, when I need to unplug the usb disk, and plug it again later. I can't be always changing the BIOS settings... How can one solve this for ever?!?!

  Read the article

• HP Officejet 6000 E609n unexpectedly goes offline

  - by Sajee

  My local library has a number of Windows Vista SP1 PCs connected to two HP Officejet 6000 E609n wireless printers. Each PC can print to either of the two printers and one of the two printers is the default on each PC. This configuration has worked well over the last year w/o any trouble. Recently, the library staff is reporting that sometimes when patrons try to print, they can't. Closer inspection shows that the the default wireless printer is offline. In order to get the printer online again, the printer has to be restarted. In Control Panel Printers applet, under the Printer menu, the "Use Printer Offline" option is grayed out and there's no way to bring the printer back online w/o restarting it. Does anyone know what's going on here?

  Read the article

• How to perform diagnostics (stress test) on HP Smartarray Controller

  - by pepoluan

  At my office, we have a server that we suspect its RAID controller (HP Smartarray) is failing. A cold boot, however, does not indicate anything. Can anyone recommend me a method to stress-test the controller? Symptoms that makes me suspect a failing controller: Disk access getting slower, queue getting longer Running dmesg on the XenServer console I see many messages similar to this one: end_request: I/O error, dev tda, sector 253655584 (the sector number is never the same) When we move the VM to another physical host, we no longer see the above message Running idle (without any running VM), the dmesg no longer emit the above message A search on Google indicated that the above message is most commonly associated with a failing SmartArray controller. How can I be sure that the SmartArray controller is failing?

  Read the article

• HP Probook 6550b has issues with an external monitor

  - by chama

  I recently got a new HP Probook 6550b laptop for work. However, very often, when left alone (not put to sleep), the built in display will go dark. Not only that, but whenever I plug in an external monitor, the display will blank out as well. Sometimes after this happens, putting the laptop to sleep and then waking it up solves the problem. But only sometimes and only for a short time. The next time I plug in my monitor, it happens again. I know this isn't only my problem - 6 other people got the same laptop as I have at the same time, and we're all having such issues. Any suggestions as to the root of this problem and a way to fix it? It's driving me crazy!

  Read the article

• HP Ambient Light Sensor Adjustment

  - by Robin Day

  I have an HP nc4400 running Windows 7 64 bit. If I have the ambient light sensor enabled, it works well, but, its slightly too dim. I can turn off the light sensor and turn up the brightness manually and its more than bright enough. When I go to the brightness settings in Windows I can make the screen dimmer with the ambient light sensor enabled but cannot make it as bright as if it is disabled. So my question is, is it possible to keep the light sensor enabled but configure it so that the screen is brighter for given "ambient light". At the moment I have to turn it off whenever I'm in the office or outside in sunlight as I need the screen as bright as possible and it seems no matter how light it is, it never goes to full brightness when it's enabled.

  Read the article

• HP Z210 SFF: two different video cards produce no Displayport output when installed

  - by ConcernedOfTunbridgeWells

  I have a HP Z210 SFF that I'm trying to install a video card into. I've tried two different cards in Slot 2 (a Quadro FX380LP and a Quadro 600). Neither of these cards produce a displayport signal when installed. With neither installed the displayport port on the motherboard works fine with the built in graphics. When I install the cards it produces no signal and the cards don't either. The Quadro 600 is brand new and the odds of having two dead video cards is quite low. Is there something fundamental that I could be missing out - a BIOS setting maybe?

  Read the article

• hp laserjet 4200 madness

  - by C-dizzle

  I have an HP LaserJet 4200 printer that is acting really weird. I can print from internet just fine, no problem... but when I try to print from a document used in microsoft word, for example, I always get "Manual Feed Tray 1". I have racked my brain on this and cannot get it figured out. It's a networked printer and only an administrator account can make changes to it, I have also reset the printer back to factory settings, uninstalled and reinstalled onto the pc's and server it is connected to. Running out of hair since I'm pulling it all out... please help.

  Read the article

• Hp Procurve Switch : port filtered

  - by user117140

  My HP Procurve switch is blocking port 22 and I dont know how to unblock it.Please let me know From the server, see port 22 is blocked [root@server ~]#nmap -p22,80,443 10.247.172.70 Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2012-04-16 14:12 IST mass_dns: warning: Unable to determine any DNS servers. Reverse DNS is disabled. Try using --system-dns or specify valid servers with --dns_servers Interesting ports on 10.247.172.70: PORT STATE SERVICE 22/tcp filtered ssh ------------------> see 80/tcp filtered http 443/tcp filtered https This is blocked on cisco switch but I dont have any clue how this is done. I know that vlan is configured on switch. vlan 54 ip ospf 10.247.172.65 area 0.0.0.10 vrrp vrid 54 owner virtual-ip-address 10.247.172.65 255.255.255.192 priority 255 enable exit exit Please let me know how to unblock ssh port 22 access on this switch?

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >