Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 163/808 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Router behind router network setup

  - by optimus

  My relative has bought a router instead of a switch which causes remote-access control issues on his network. His existing network has a 1st router where all PCs are connected via LAN cables. The 2nd router connnects to the 1st router and the remaining PCs are connected to the 2nd router via LAN cables. Normally, I would perform remote-access to help him out with some task. Now it seems all services behind the 2nd router are unavailable to me. How can I resolve this issue?

  Read the article

• Unable to access local network when Cisco VPN client is connected

  - by bryanroth

  I'm a developer and don't have much networking expertise, so bear with me. I'm using the Cisco VPN Client 5.0.02.0090 to connect to my work's VPN that way I can RDP into my work computer. Once connected, I can't ping anything on the local network once connected to the VPN thus I am unable to access my work's network. This used to work about two weeks ago but abruptly stopped working today. However, I have the Cisco VPN Client installed on my laptop and I am able to ping and RDP into my work computer from there. Both my desktop and laptop computers are connected to the same router at home. I have tried the following so far: Rebooted my computer Reinstalled VPN client Updated NIC drivers Disabled firewall Opened up ports 500, 4500, and 10000 Any help would be much appreciated. Thanks!

  Read the article

• Internet speed is suddenly slow only on my laptop, but it's normal in other devices

  - by Wael

  I have a TP-Link router connected to a ZTE modem, with 2 laptops, a tablet, 2 phones connected via the router's WiFi, and an additional desktop connected via ethernet to the router. Today, my laptop started to have a very slow connection to the internet, which at first I thought it was the operator's problem to find out later on that it works fine on other devices. I tried to connect directly via WiFi to the modem, but it was as slow. I cannot access facebook at all, google takes forever to do a search, and youtube barely works. The weird thing though, is that when youtube does work, the streaming is full speed. This happens also when I download a file! My browse is Firefox, but I used Chrome and IE9 with the same results. I work on Windows 7 Thanks for any advices.

  Read the article

• Wrong DNS query in Active directory network with NetBIOS enabled client

  - by koankoder

  The setup: Active Directory is enabled on the network (abcd.com) We have a single character host name (1.abcd.com) one of the desktop has an old XP with NetBIOS stuff enabled The Problem Whenever we query for any host name from the XP machine, the first character alone is taken for DNS query (one.abcd.com will query for o.abcd.com, two.abcd.com will query for t.abcd.com) Even if we give some IP, the application queries with numeric prefix (10.x.x.x will query for 1.abcd.com).Since we already have 1.abcd.com, all query and traffic ends up in 1.abcd.com After discussion with network guys, it seems netbios DNS queries by having some prefix etc. but none of them is actually sure on what is happening. Is there any docs which can explain this behavior ? Is this valid behavior in NetBIOS environment ?

  Read the article

• Dual NIC internet access

  - by JavaRocky

  Q1. If a computer had two NICs, lets say windows, on which interface would HTTP traffic (or any for that matter) go out on. Not sure how the routes table would look like. Q2. If one of the NICs link becomes unresponsive, would traffic be automatically routed to the other NIC? Thanks.

  Read the article

• Share Pc' s wifi internet connection to router and spit it out trough it

  - by Maken

  Basicly im trying to share the an internet connection that i receive through wifi from my bestfriend's place to my place and Extend it trough a router for my consoles and other computers in my household i have 1 pc with Wifi /Ethernet , one router "DD-wrt"ed" Schema is like this Internet -----Modem------- (Friend's)Router -----to my PC through Wifi (Ics)---- to Router(2) through lan----- to Computer 1 (over lan or wifi etc...) ------ Computer 2 (over lan or wifi etc...) i want the computer 1 and 2 to have internet from Router(2) if its not clear enough il try to give more details but a little help would be greatly appreciated

  Read the article

• Why does my internet connection get cut off and is slow sometimes?

  - by user3716773

  When I first set up my internet connection it was all good and fast but after 2 months the connection started to be slow sometimes and sometimes there is no connection until i turn off my wifi then turn it on again on the laptop. And sometimes I have to restart the router. I don't know what's wrong. I think there is something wrong with the router because this problem happens with my brother's laptop and my phone too.

  Read the article

• Is there any way to abstract IP address during ssh?

  - by Vivek V K

  I have a server which is in the middle of a forest. It is connected to the Internet via a microwave link and an ADSL link.Hence it has two different static IP addresses. Now if there is heavy rain, the microwave link breaks and I should use the much slower ADSL link. And I ping the microwave ip time to time to check if it is up again . But at times, I end up using the very slow ADSL link even if the microwave link is back up. Hence I need a way to automate this in the following way. 1.I need to abstract the IP address of the machine with some other name which when I use ssh or sftp, will poll both the IP and connect me to the best one. so for eg: if I say ssh -Y name@server, It should first try to connect to the microwave link if it cant, then connect to ADSL. 2.Suppose the first time I connect, the microwave link is down so it connects to ADSL, I need it to dynamically change to the microwave link once it is working again. Is this even possible?

  Read the article

• Roundcube access from outside local network

  - by Mike K

  I have setup hmailserver on a windows xp pro computer and everything is working great when it comes to getting it to send and receive email. Now here is where my problem comes in... I have setup roundcube using uniserver and everything works great internally. Now, what I am trying to do is to be able to access roundcube from the internet outside of the local network. I have opened up ports 80, 443, and the mysql port yet I am still unable to access this from outside of the network. The error message that I am getting is as followed: Forbidden You don't have permission to access /webmail/ on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. I believe something needs to be edited in the apache config file. Any help would be greatly appreciated. I am hoping I dont need to run this on windows server but I'm kinda losing hope and thinking I will need to because I need IIS.

  Read the article

• slow network in centos5 VM with centos5 host running KVM

  - by dan

  I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

  Read the article

• ZigBee Maximum Bandwidth

  - by Kris

  What is the maximum rated bandwidth for ZigBee? I can't seem to find this information anywhere, not even on the ZigBee Alliance website at http://www.zigbee.org/ I did find some information elsewhere, but it dated back to 2004, so I'm guessing it's different now that it was 5 years ago. Thanks!

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• Ubuntu not connecting to network in Hyper-V

  - by soandos

  I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

  Read the article

• Cannot access SMC8014WG-SI provided by TimeWarner/RoadRunner administrative interface...

  - by Matt Rogish

  I just received installation of RoadRunner internet/TV/Voice and I was given a wi-fi router from the TimeWarner folks. The model is a SMC SMC8014WG-SI. Unfortunately, the password it uses is WEP and that is, as we all know, completely insecure. The tech that was here didn't know how to change it to something like WPA2 w/TKIP, and I was on hold for 20 minutes with the TimeWarner folks before I gave up. My problem is that the default web interface (http://192.168.0.1) isn't responding. I can ping it, I can access the internet through it, but I can't get to the admin interface. I did a "hard reset" of the device but still no dice. My suspicion is that the wi-fi admin interface is disabled (a common setting) but the wired interface isn't working on either of my two laptops (I've tried two laptops with two different cables, no link light activated). Am I SOL? Did they lock this down so I can't do what I want to do? Worst-case is I just hook up my go-to WRT54G router to the other modem and leave this one turned off, but I'd rather use their hardware to avoid any "It's not our problem" in the future. Any thoughts? Thanks!!

  Read the article

• What is a reasonable range for signal strength when next to my router?

  - by Jeff

  I know that these things depend largely on specific hardware but I don't even know if I am in the neighborhood. What would a reasonable range of signal strength be when my device is less than 5 feet from my router? House3 is my main router at 61% strength and that seems very low! Repeater is my... repeater which is 50' away in the next room. I'm not terribly concerned with the Repeater until I get my main router settled.

  Read the article

• Juniper Network Connect (VPN) on Windows 7

  - by Virat Kadaru

  My company uses Juniper networks for vpn access. I am unable to get the juniper network connect client to work on windows 7 64-bit. It used to work before but after I formatted my system it gives the following error every time I start the vpn client If I check the logs I see this error The Juniper Network Connect Service service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly. Thanks in advance.

  Read the article

• VB6 network errors Windows 2008 run on ESX VMWare

  - by hivedome

  We have an application built in vb6, the executables for the application are run locally on a Windows 2008 Terminal Server the dll's for the application are located on a network share. Intermittently parts of the application crash with inpage errors.. we realise the .dll it references then copy that dll locally to the windows 2008 server and register the application can then run again alternatly we reboot the server and all ok. ideally we do not want the exec's or dll's on local server, they should be located on network share for other Terminal Servers to access. error values we receive are C0000203 C00000C4 I have disabled windows 2008 UAC and DEP.. Has anyone experienced this type of behaviour in 2008?

  Read the article

• wrt54gl reboots; troubleshooting steps?

  - by Bill

  I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

  Read the article

• OpenVPN Cloud for Network monitoring

  - by mezgani

  I'm working on a supervision project based on OpenVPN, a good way to send some network traffic through a secure channel to office from there out to the Internet. On office i have an OpenVPN server installed and i need to monitor all branches servers that are behind firewalls. I know that the point to point solution is very easy so we may only install OpenVPN client on node that i need to monitor. In the fact, is there any other issue that could help to supervise all branches DMZ network, without installing the client on each machines.

  Read the article

• Network wide rule to forwared IP address

  - by Patrick

  Hi, we have a virtual machine which hosts a web based bug tracker in our network which is reached internally via e.g. 192.168.1.5:9800. From the outside we made a port forwarding in our firewall so that the web site can be reached via e.g. 72.10.10.10:9800. Now that works fine but the problem is that we got different IP addresses to reach the same service depending if we are in the office or at home and when the service sends out an email the link doesn't always work :) So we are looking for a solution to fix it. One could be to make a rule in out firewall that all communication to 72.10.10.10:9800 is forwarded to 192.168.1.5:9800... If that's possible that is considering it's an IP address + a port. The reason we used a port is because we only got one static public IP address but multiple virtual web appliances. Thanks for any suggestions or solutions :) Patrick PS: The network is a Win 2008 R2 domain by the way

  Read the article

• RSSI value of wifi connection - how to interpret?

  - by knorv

  In MacOS X you can obtain the RSSI value of your by wifi connection by holding Alt and clicking on the Wifi-indicator icon. My questions are: What range of values can RSSI take? What RSSI ranges corresponds to "good", "normal" and "bad" connectivity?

  Read the article

• brctl Not working fine with bridging eth0 and at0

  - by Passi0n

  I made an access point with airbase-ng and its at0 I tried to bridge my eth0 and at0 by brctl addbr demo brctl addif demo eth0 brctl addif demo at0 brctl demo up dhclient3 demo & already removed eth0 ip so when i use ping 192.168.1.1 -I eth0 theres no reply but if i use ping 192.168.1.1 -I demo it works!!! In browser internet works fine so when i connect my android with at0 (access point) it should same work. but its now working at all :(

  Read the article

• tool for monitoring network traffic on Windows 7 Home

  - by Xah Lee

  for Windows 7 Home Edition: can anyone recommend a tool to monitor network traffic? either build-in or 3rd-party. I like to have a graph view (e.g. as in Task Manager) but also nice are tool that lets me see what IP/port that's incoming/outgoing. Command line is fine. Or even some tutorial. Thanks. (am old unix sys admin and web app dev. Though not much of a network admin and don't know much Windows. I need this tool just for my home PC, not in any pro capacity.)

  Read the article

• slow network in centos5 VM with centos5 host running KVM

  - by dan

  I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

  Read the article

• Synergy on macbook with osx mavericks wifi connection

  - by user332956

  I'm trying to set up Synergy with my macbook pro running OS X 10.9.3 as a client and my Windows 7 desktop as a server. I'm having some pretty bad connection problems though when I try to use my mac. Every couple seconds the mouse or the keyboard will stop working entirely then come back. I ran some tests and found that the ping from my desktop to my mac would be very high every third ping or so(1000+ ms) or sometimes even time out. If I ping my desktop from my mac the pings are all reasonably low. I believe that this is a power saving feature of Mavericks and I have found a way to get around it by continually pinging my router on my mac, keeping my wifi card from going to sleep. I'm using this right now to type this up with synergy and have had zero issues. Has anyone else ran into this issue and found a better solution? So far, I think my best bet would be to buy an ethernet adapter but I'd rather not have yet another cable running across my desk.

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >