Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 176/314 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

  - by den-javamaniac

  I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

  Read the article

• Expertise Location [closed]

  - by Alexey Shatygin

  Is there some really working implementations of the expertise location systems exist? It is very hard to find anything about it. What sources to use, what to read, where to look? I've started with reading David W. McDonald's, Mark S. Ackerman's overview "Just talk to me" and now need just something more detailed. For those, who voting this question to be closed for off-topic: it is connected to IT sphere, if you don't know what it is - why ever vote? http://en.wikipedia.org/wiki/Expertise_finding http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.40.4654&rep=rep1&type=pdf

  Read the article

• Can't see a Windows XP computer on the network

  - by user56614

  I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

  Read the article

• phpmyadmin error #2002 cannot connect to mysql server

  - by Joe

  so i am getting this error when trying to connect to my mysql server. i have reinstalled MYSQL and php several times and tried a slew of command line work from info around the web.mysql is running and i know that my mysql.sock exists and is located in ~/private/tmp/ and also in ~/tmp/. i also have plenty of hard drive space. i have installed and setup phpmyadmin correctly only adding a password to 'Password for config auth'. AND i have connected to the server via Sequel Pro. so my question is what the heck is going on that i can't connect to the server via phpmyadmin? any guesses? also i'm on a 64-bit intel mac running snow leopard

  Read the article

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

• Just installed Ubuntu 10.10, can't connect via SSH

  - by swilliams

  I've just downloaded and installed Ubuntu 10.10 in a VM on virtualbox (4.0.4). Everything on the VM is set to the defaults: NAT adapter. When installing the OS, I selected OpenSSH, and nothing else. I've tried to connect to the server via ssh from the host (running Mac OS X), but it only timeouts. Can't scp my credentials to it or ping the server either. As far as I can tell, the server is connected fine, has a valid IP, and can ping google.com. I know I'm missing something basic here... I don't believe I have any kind of firewall up, unless there's one I don't know about that comes with the install. iptables has the default configuration.

  Read the article

• When using ssh with priv/pub keys, how to connect to the destination using a user different from the origin machine?

  - by lpacheco

  I need to connect to hostB using user2 from hostA where I´m connected using user1. I've run ssh-keygen -t rsa on hostA and copied the public key generated in ~/.ssh/id_rsa.pub to the ~/.ssh/authorized_keys of user2 in hostB. Then I tried to connect from hostA to hostB using the command: $user1@hostA> ssh user2@hostB I still get a request for password: user2@hostB's password: If I try to connect using the same user on both hosts, it works correctly: $user1@hostA> ssh user1@hostB Enter passphrase for key '/home/user1/.ssh/id_rsa': What am I missing?

  Read the article

• IP not detected in terremark enteprise cloud server - how to install VMware on instance?

  - by JohnMerlino

  Using terremark enteprise cloud, when you create a server, you assigned an IP address to them and that IP is visible under Detected IP when selecting the server. However, I created a server, with IP address and I created an internet service and connected it with a node. I used protocol TCP and mapped it to port 3001. But I notice when I select my server, the IP address doesnt dsplay under Detected IP and then I VPN Connect, launch terminal and try to SSH with the IP to my server, and I get connection timed out. I presume the reason lies in that the IP address is not being detected. Someone suggested that my VMware-Tools is out of date and in fact on the server instance for VMware-Tools it does say "out of date". I'm not sure how to mount the instance and install VMware-Tools. I am using Mac OSX. Someone said that it will only work on PC running IE.

  Read the article

• How to manage configuration software installations of non-domain Windows XP machines?

  - by Digi

  I have a large set of unattended Windows XP machines who are not connected to a domain or even to each other. I am struggling to find any tools out there that I can use to deal with them in one application. I am hoping to find software that I can perhaps install a client on each machine, then have it essentially proxy out configuration information and possibly commands (install, uninstall, stop service, etc) across the whole network. The closest I've come is Nagios and its client, but it cannot be used to push files through and run commands remotely. Any suggestions?

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• How can I display host name on windows desktop

  - by Martin

  I do a lot of work on Windows Server 2008 remote desktops and often lose track of which host I am currently logged on to. Is there a way of displaying (without installing any non-standard apps) the host name or IP address of the host I am connected to in either the wallpaper or the notification area? I tried creating files in the desktop with the name of the machine - but my roaming profile shows the same set of desktop files on every machine, so that was scuppered. Duh! In shell windows this is easy: just set the prompt to display the host name. Surely there is a simple way of doing the same for the graphical desktop.

  Read the article

• How could all of my hard drives fail at once?

  - by Taylor

  I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I have the SSD connected to a laptop VIA USB-SATA cable, and sure enough, the partition table is missing. This tells me that the Motherboard / SATA controller / software actually broke the drives, not that they just can't be read correctly. Something similar happened to only the SSD a few months ago, and I was forced to just re-partition it. How the heck could his have happened? Bad Motherboard or SATA controller?

  Read the article

• How to put fear of God (law) into Wi-Fi hacking neighbors [closed]

  - by Shakehar

  I live in an apartment and some new guys have apparently moved into one of the apartments. They have been shamelessly hacking into my WiFi. Mine was initially a WEP encrypted network and out of laziness I just limited and reserved the IPS on my router for the people in my house. Yesterday I had to free up an IP for a guest in my house but before he could join the network these guys connected in. I have changed my encryption to WPA2 and hope they dont have the hardware/patience required to hack into it, but there are many wi-fi networks in my apartment most of which are secured using WEP. I don't really want to call the police on them. Is there any way to deter them from misusing other people's wi-fi ? I have gone through I think someone else has access to my wireless network. What next? but I have already taken the steps mentioned there.

  Read the article

• Issues connecting to a pix 501 via console cable

  - by Bourne

  Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 ports so that's the first element that doesn't look right to me. Console cable light doesn't turn on when cable is plugged in and have tried rebooting it many many times to see the bootup sequence with no result. Also, I cannot connect to it via pdm or console but the traffic is permitted through. Are there any additional troubleshooting steps I could do or should I count it as dead? Thank you.

  Read the article

• When to use MySQL replication or DRBD for HA on Xen VM?

  - by user62513

  I'm setting up a database which needs to be needs to provide High Availabilty. My primary concern is high performance and robustness (I don't want something that will fail fast and badly). The database is accessed by the application at an average of 300 qps. It's will run on Xen VMs and it has some InnoDB tables as well as MyISAM tables. The VMs are connected via ethernet 100Mbit/s ethernet cables. Which of the two - MySQL replication or DRBD - would you recommend in such a situation? Or should I use DRBD to make the master database Highly Available and use MySQL replication on the slaves? I'm a developer so these things are all not so easy for me to make a sound judgement.

  Read the article

• Ftp freezes despite connection seems allright

  - by Alfred M.

  I am trying to connect to a an ftp through command line using ftp ftpperso.free.fr I am then prompted for username and password. I get this message 230 User username logged in. Remote system type is UNIX. Using binary mode to transfer files. and status confirm that I am connected to the server. However when I then try any command, for instance ls the console freezes and nothing happens. Do you have any idea of what is going on?

  Read the article

• Set up an Email server on intranet without domain

  - by Devdatta Tengshe

  I work in a small office with about 35 people and we are all on a intranet. This network is not connected to the internet. Is it possible to set up an email server, with which we could send emails to each other? (We don't need to send emails outside our network.) I cannot use a messenger service like Openfire, since the messages could be asynchronous, and we'd like to get those emails in a email client like Thunderbird. Another obstacle we have is that we do not have a domain name. Any ideas on which free (as in beer) software could be used? We have both Windows and Linux machines.

  Read the article

• VPN pre-shared key problems

  - by Owl

  I have two vpns set up on a Symantec Gateway Security 320. VPN 1 goes to a Symantec Firewall/VPN 100 to another clinic of ours and every hour they lose connectivity and the error log on the Firewall/VPN100 shows an invalid pre-shared key error, although, both devices show the same pre-shared key entered. VPN 2 goes to our software vendor to use an additional part of our program. I am unable to ping the remote address and so is the other company, but my VPN status shows it is connected. They have told me the pre-shared key seemed to be automatically trying to resubmit itself as if it were incorrect, about every hour even though it is correct. They also told me port80 traffic was closed but I show the HTTP service using 80 redirected to 80 in my firewall settings. Please help.

  Read the article

• Virtualbox VM (spawned by Vagrant) running but inaccessible. What now?

  - by Matt V.

  I have a Virtualbox VM running Ubuntu that was started by Vagrant. At some point my ssh session connected to the guest stopped responding. I tried "vagrant halt" from a terminal window on the host (OS X). The shutdown process seemed to also hang. Shutting down the Oracle VM VirtualBox Manager doesn't shut down the VMs themselves. Is there a way in either Vagrant or VirtualBox to force the running VM to shutdown? When running desktop guest OSes, closing the GUI window presents several options for shutting down the guest, but I don't know how to do the equivalent when the guest is running headless.

  Read the article

• Is Apache ReverseProxy to Passenger Standalone an acceptable production deployment?

  - by davetron5000

  I have the need to deploy Rails 3 apps, using RVM and gemsets, and am expecting “public” traffic (i.e. this is not an internal-only app). I also must use Apache as the public interface to my app. I understand that Passenger Standalone can help accomplish the rails/RVM end, and I have successfully set it up in my development environment. My question is how viable this setup is for a production deployment. Is deploying via Apache configured to ReverseProxy to my passenger-powered Rails app going to create problems? Since I'm designing the production deployment now, I want to understand if I should spend the additional time to set up Passenger connected to Apache and have that Passenger communicate with Passenger Standalone instance running my Rails app. So, I'm looking for one of I guess three answers: Apache Reverse Proxy to Passenger Standalone will be generally fine You should not use the Apache/Passenger Standalone configuration, but set up Passenger on the Apache side as well Your entire setup is just Wrong, please RTFM (and include link to "FM")

  Read the article

• How to switch off the monitor when mouse reaches the edge of the screen?

  - by evgeny9

  I have 2 computers at home (Windows XP and Windows 7), but one monitor for both of them. They are connected to this monitor using different interfaces: DVI and VGA. I'm also using one keyboard and one mouse to control both PCs with the help of Synergy or Input Director. But I still need to manually switch between monitor interfaces. I wonder, if there's some way (software) that will switch this interfaces (turn off the monitor), when reach the edge of the screen with the mouse. Until now I found several answers, which help to avoid pressing hardware buttons, but still can not do the job automatically based on mouse pointer coordinates. Thank you.

  Read the article

• If I let Google handle my emails for my domain, my Wordpress site won't send out emails anymore

  - by Fulvio

  Since I decided to let Google handle all my emails for my domain, while the domain is hosted on a 3rd party server, emails send out by a Wordpress installation no longer work. My supposition is that since all email is being routed to Google, my specific account on that server for that domain is unable to send out emails. I definitely wish to keep using google services for handling my emails since it comes with all the advantages connected to a Google account. However I need my Wordpress installation to send out administrative emails. I run my server with CPanel. How to configure that specific account and/or Wordpress to keep it able to send out emails? I don't need people to answer these emails sent out from server (eventually I might set a reply-to-address perhaps) thanks

  Read the article

• Windows 7 Intermittent Connection Issues (Continuously "identifying")

  - by andrewktmeikle

  I have an issue solely with my desktop windows 7 machine on my network (the network has multiple different devices, on the same and different operating systems) and the issue is that irregularly, although sometimes frequently, I briefly get disconnected from the internet (briefly is for around 5-10 seconds). However, I never loose the bars on the wifi thing, eg I don't get the yellow triangle, but it goes to the identifying stage and then reconnects. The reason I noticed the problem was when I was streaming music it would stop and I would refresh the page and it would start working again ( turned out it was because it took that amount of time to get connected again). So my question is, what would cause the intermittent issues and start the "identifying" process again. I don't think its my router, because no one else is having problems, so the other option is that its a problem specifically with my machine. I'm connecting to a Netgear DG834GT router, and I'm using a Edimax Wireless-N150 USB Adapter. Anyone have any ideas?

  Read the article

• Remotely start VNC server on computer with no Admin password

  - by Joe M.

  I'm trying to remotely access a particular computer of mine and it seems that VNC has stopped. I can tell that the computer is still running because I can VNC into another machine on the same network and can see my target machine under the Network section in Windows Explorer and can also ping it succesfully. To summarize: I own the target computer I am currently too far to physically access it Remote Desktop Connection feature of Windows is not enabled The computer normally runs a VNC server, but it seems to have stopped The computer is definitely on and connected to the network The computer has no password on the Admin account I can VNC into other computers on the same LAN Given these conditions how can I get into the target to open VNC server, or even just reboot the target (VNC should open on startup)? I have tried PsExec and get "access is denied", and also tried "Connect to another computer.." from the Computer Management console and also get "access is denied".

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >