Search Results

Search found 10306 results on 413 pages for 'opensuse 11 3'.

Page 285/413 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

  • Google Public DNS is not used in trace route

    - by IT researcher
    In my PC i am using google public DNS as DNS server.In Internet protocol(TCP/IP) properties i have set Preferred DNS server as 8 8 4 4 and Alternate DNS server as 8 8 8 8. According to me this DNS server should be used to resolve any request to website to its IP by using this DNS servers.(see google DNS and How Domain Name Servers Work). But when i checked trace route to a website in my PC i got following Tracing route to www.google.com [74.125.236.80] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.201 2 360 ms 349 ms 292 ms 122.178.216.1 3 145 ms 107 ms 148 ms 122.166.32.121 4 32 ms 53 ms 120 ms 122.166.32.9 5 45 ms 42 ms 121 ms 122.175.255.29 6 63 ms 76 ms 51 ms 182.79.255.45 7 52 ms 134 ms 61 ms 72.14.194.22 8 86 ms 59 ms 72 ms 72.14.232.202 9 106 ms 107 ms 60 ms 66.249.94.39 10 101 ms 103 ms 117 ms 209.85.249.235 11 148 ms 224 ms 276 ms 74.125.236.80 Trace complete. When i checked all these IP in who.is i found that it is of my ISP. So my question is where does Google public DNS is used? Also how come my ISP's nameserver is used even if i set google public dns as my dns server in my PC?(OR does my any settings are wrong)

    Read the article

  • Weird routing issue

    - by Joel Coel
    I'm having some weird internet problems on campus. I know it's something simple, but it's a case where I need another set of eyes. I think I can explain the problem best by posting a tracert: Tracing route to google.com [74.125.45.147] over a maximum of 30 hops: 1 3 ms 3 ms 3 ms 192.168.8.1 2 1 ms 1 ms 1 ms elissaemily-pc.york.edu [192.168.10.5] 3 2 ms 2 ms 2 ms rrcs-76-79-19-33.west.biz.rr.com [76.79.19.33] 4 31 ms 3 ms 2 ms ge-1-1-0.lnclne00-mx41.neb.rr.com [76.85.220.109] 5 20 ms 17 ms 17 ms ge-7-3-0.chcgill3-rtr1.kc.rr.com [76.85.220.137] 6 20 ms 20 ms 19 ms ae-5-0.cr0.chi30.tbone.rr.com [66.109.6.112] 7 19 ms 19 ms 24 ms ae-1-0.pr0.chi10.tbone.rr.com [66.109.6.155] 8 26 ms 24 ms 24 ms 74.125.48.109 9 23 ms 24 ms 21 ms 216.239.46.246 10 39 ms 39 ms 55 ms 209.85.242.215 11 39 ms 39 ms 39 ms 209.85.254.243 12 39 ms 40 ms 96 ms 209.85.253.145 13 39 ms 39 ms 39 ms yx-in-f147.1e100.net [74.125.45.147] Trace complete. Note the second entry in there. Not only is the host name a student's computer, but the ip address doesn't exist. Dhcp shows that host as having a different address and you can't ping any 192.168.10.5. Yet somehow it's routing packets for us (and not very well, either — things are slow right now). The basic network routing table looks like this: Destination Subnet Mask Gateway --------------------------------------- Default Route -- 10.1.1.5 (our firewall) 10.0.0.0 255.0.0.0 -- 192.168.8.0 255.255.252.0 --

    Read the article

  • Random Hard Freeze of Windows 7 (is Kaspersky to be blamed for this?)

    - by Christian Ivicevic
    The last few weeks I experienced a new strange behavior of my computer. Sometimes Windows 7 just freezes with no real reason at all. While listening to music for example the playback hangs and you can hear a very nasty sound. Neither mouse nor keyboard input is handled and everything is just stuck. Using Ubuntu this does not happen, so I think it is just a matter of driver issues or a Windows 7 bug. Furthermore I am really suspicious about Kaspersky (Internet Security 11) and so I let it perform a complete virus scan while no other app is running. At about 50% it happened again and I needed to restart the computer by holding the power button the bad way... A really weird thing is that playing Skyrim this happened once, however music playback did not stop. Only the framerate dropped to 0 and sometimes for a few seconds I am able to move. Therefore I am really confused as furthermore no bluescreen pops up. Memtest told me that everything seems to be alright... Can anyone explain me which data you need about my hardware and software (and which tools tools to use to gather the informatik) to be able to provide any help on my problem?

    Read the article

  • process and memory issue on linux server

    - by zapping
    Need some assistance in analyzing apache and php process running on linux server. Its a 8-core intel processor with 4GB ram. When the website on it runs the top displays like this. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 23459 username1 16 0 151m 27m 8388 S 11.3 0.7 0:11.71 php5 23730 username1 16 0 151m 28m 8388 S 11.3 0.7 0:03.87 php5 23458 username1 16 0 151m 28m 8388 S 3.0 0.7 0:19.20 php5 16202 mysql 15 0 459m 38m 4624 S 0.7 1.0 62:33.81 mysqld 24141 nobody 15 0 311m 5832 2304 S 0.3 0.1 0:00.03 httpd Why does the command say php5 when the website is accessed. Both apache and php was preconfigured so not sure whats done there. Tried setting up the same site and db on a different server but on it the process shows httpd always and not php5. The site uses mysql db. The problem is server load seems to go till about 5.x when the website was access by about 16users. When the free -m command was given the output shows total used free shared buffers cached Mem: 3941 3727 213 0 236 2734 -/+ buffers/cache: 756 3184 Swap: 4095 0 4095 Lots of memory seems to be in cache and free memory is less. Even when the website is not accessed that is leaving it very much idle for about 2days the free memory showed just 190. When the site is accessed the free memory seems to be go till 90mb then it increases to about 150mb. It always seems to remain just about 200mb. Is it somehow related to the server load showing 5.x. Will adding some more RAM resolve the load issue?

    Read the article

  • GlassFish cluster-targeted jdbc is not enabled

    - by Jin Kwon
    I have a GlassFish cluster. When I tried to add node and a instance, DAS saids a bunch of error messages telling Resource [ jdbc/xxxx ] of type [ jdbc ] is not enabled [#|2012-11-14T12:07:04.318+0900|SEVERE|glassfish3.1.2|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=2803;_ThreadName=Thread-2;|java.lang.StackOverflowError at java.io.FileOutputStream.writeBytes(Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:318) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:122) at java.io.PrintStream.write(PrintStream.java:480) at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:221) at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:291) at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:295) at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:141) at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:229) at java.util.logging.StreamHandler.flush(StreamHandler.java:242) at java.util.logging.ConsoleHandler.publish(ConsoleHandler.java:106) at java.util.logging.Logger.log(Logger.java:522) at com.sun.logging.LogDomains$1.log(LogDomains.java:372) at java.util.logging.Logger.doLog(Logger.java:543) at java.util.logging.Logger.log(Logger.java:607) at com.sun.enterprise.resource.deployer.JdbcResourceDeployer.deployResource(JdbcResourceDeployer.java:117) at org.glassfish.javaee.services.ResourceProxy.create(ResourceProxy.java:90) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:507) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455) at javax.naming.InitialContext.lookup(InitialContext.java:411) at javax.naming.InitialContext.lookup(InitialContext.java:411) at com.sun.appserv.connectors.internal.api.ResourceNamingService.lookup(ResourceNamingService.java:221) the JDBC Resource is ok and targeted with the cluster. I've installed the JDBC driver on the new node. Can anybody help?

    Read the article

  • Solaris: detect hotswap SATA disk insert

    - by growse
    What's the method used on Solaris to get the system to rescan for new disks that have been hot-plugged on a SATA controller? I've got an HP X1600 NAS which had 9 drives configred in a ZFS pool. I've added 3 disks, but the format command still only shows the original 9. When I plugged them in, I saw this: cpqary3: [ID 823470 kern.notice] NOTICE: Smart Array P212 Controller cpqary3: [ID 823470 kern.notice] Hot-plug drive inserted, Port=1I Box=1 Bay=12 cpqary3: [ID 479030 kern.notice] Configured Drive ? ....... NO cpqary3: [ID 100000 kern.notice] cpqary3: [ID 823470 kern.notice] NOTICE: Smart Array P212 Controller cpqary3: [ID 823470 kern.notice] Hot-plug drive inserted, Port=1I Box=1 Bay=11 cpqary3: [ID 479030 kern.notice] Configured Drive ? ....... NO cpqary3: [ID 100000 kern.notice] cpqary3: [ID 823470 kern.notice] NOTICE: Smart Array P212 Controller cpqary3: [ID 823470 kern.notice] Hot-plug drive inserted, Port=1I Box=1 Bay=10 cpqary3: [ID 479030 kern.notice] Configured Drive ? ....... NO But can't figure out how to get the format command to see them so I know they've been detected by the system.

    Read the article

  • How to write files in specific order?

    - by Bernie
    Okay, here's a weird problem -- My wife just bought a 2014 Nissan Altima. So, I took her iTunes library and converted the .m4a files to .mp3, since the car audio system only supports .mp3 and .wma. So far so good. Then I copied the files to a DOS FAT-32 formatted USB thumb drive, and connected the drive to the car's USB port, only to find all of the tracks were out of sequence. All tracks begin with a two digit numeric prefix, i.e., 01, 02, 03, etc. So you would think they would be in order. So I called Nissan Connect support and the rep told me that there is a known problem with reading files in the correct order. He said the files are read in the same order they are written. So, I manually copied a few albums with the tracks in a predetermined order, and sure enough he was correct. So I copied about 6 albums for testing, then changed to the top level directory and did a "find . music.txt". Then I passed this file to rsync like this: rsync -av --files-from=music.txt . ../Marys\ Music\ Sequenced/ The files looked like they were copied in order, but when I listed the files in order of modified time, they were in the same sequence as the original files: ../Marys Music Sequenced/Air Supply/Air Supply Greatest Hits ls -1rt 01 Lost In Love.mp3 04 Every Woman In The World.mp3 03 Chances.mp3 02 All Out Of Love.mp3 06 Here I Am (Just When I Thought I Was Over You).mp3 05 The One That You Love.mp3 08 I Want To Give It All.mp3 07 Sweet Dreams.mp3 11 Young Love.mp3 So the question is, how can I copy files listed in a file named music.txt, and copy them to a destination, and ensure the modification times are in the same sequence as the files are listed?

    Read the article

  • Is there any way for ME to improve routing to an overseas server?

    - by Simon Hartcher
    I am trying to make a connection to a gaming server in Asia from Australia, but my ISP routes my connection through the US. Tracing route to worldoftanks-sea.com [116.51.25.54]over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.1 2 34 ms 42 ms 45 ms 10.20.21.123 3 40 ms 40 ms 43 ms 202.7.173.145 4 51 ms 42 ms 36 ms syd-sot-ken-crt1-ge-6-0-0.tpgi.com.au [202.7.171.121] 5 175 ms 200 ms 195 ms ge5-0-5d0.cir1.seattle7-wa.us.xo.net [216.156.100.37] 6 212 ms 228 ms 229 ms vb2002.rar3.sanjose-ca.us.xo.net [207.88.13.150] 7 205 ms 204 ms 206 ms 207.88.14.226.ptr.us.xo.net [207.88.14.226] 8 207 ms 215 ms 220 ms xe-0.equinix.snjsca04.us.bb.gin.ntt.net [206.223.116.12] 9 198 ms 201 ms 199 ms ae-7.r20.snjsca04.us.bb.gin.ntt.net [129.250.5.52] 10 396 ms 391 ms 395 ms as-6.r20.sngpsi02.sg.bb.gin.ntt.net [129.250.3.89] 11 383 ms 384 ms 383 ms ae-3.r02.sngpsi02.sg.bb.gin.ntt.net [129.250.4.178] 12 364 ms 381 ms 359 ms wotsg1-slave-54.worldoftanks.sg [116.51.25.54] Trace complete. Since I think it will be unlikely that my ISP will do anything, are there any ways to improve my routing to the server without them having to intervene? NB. The game runs predominately over UDP, so I believe most low ping services are out of the question, as they rely on TCP traffic.

    Read the article

  • Prestashop is not saving Memcached settings

    - by ianenri
    I have a issue with the admin site of prestashop. I'm trying to activate the caching system but it doesn't save the setting. When I add a server (I'm using an Amazon ElasticCache server) saves it, but when I select the enable option and click Save, it redirects me to "Back Office Preferences Performance" but with a blank page and the admin tabs visible. I go back to those settings again and i see that the caching option is disabled. Also, there is a warning: "To use Memcached, you must install the Memcache PECL extension on your server. http://www.php.net/manual/en/memcache.installation.php" , even if i already installed memcached via yum. I tried also, by modifying the settings.inc.php file editing define('_PS_CACHE_ENABLED_', '0'); to: define('_PS_CACHE_ENABLED_', '1'); But i get 500 Internal Server Error in every page, so i prefer to leave it as before. Any ideas? I'm using PrestaShop 1.4.6.2 with Nginx 1.0.11 and PHP-FPM 5.3.8 in a CentOS 5.7 system.

    Read the article

  • Freeradius authentication failed for unknown reason

    - by Moein7tl
    I followed this instruction to force freeradius to use mysql database. and run freeradius in debug mod. but it rejects all authentication. mysql database : mysql select * from radcheck; +----+----------+-----------+----+---------+ | id | username | attribute | op | value | +----+----------+-----------+----+---------+ | 1 | test | Password | == | test123 | | 2 | test | Auth-Type | == | Local | +----+----------+-----------+----+---------+ 2 rows in set (0.02 sec) radtest command : # radtest test test123 localhost 0 testing123 Sending Access-Request of id 235 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=235, length=20 radiusd debug mod log: rad_recv: Access-Request packet from host 127.0.0.1 port 51034, id=235, length=74 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0xbf111cbbae24fb0f0a558bfa26f53476 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 20 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 20 Sending Access-Reject of id 235 to 127.0.0.1 port 51034 Waking up in 4.9 seconds. Cleaning up request 20 ID 235 with timestamp +4325 Ready to process requests. where is the problem and how should I solve it?

    Read the article

  • remote telnet and email

    - by Mustafa Ismail Mustafa
    This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

    Read the article

  • Apache 2.2, worker mpm, mod_fcgid and PHP: Can't apply process slot

    - by mopoke
    We're having an issue on an apache server where every 15 to 20 minutes it stops serving PHP requests entirely. On occasions it will return a 503 error, other times it will recover enough to serve the page but only after a delay of a minute or more. Static content is still served during that time. In the log file, there's errors reported along the lines of: [Wed Sep 28 10:45:39 2011] [warn] mod_fcgid: can't apply process slot for /xxx/ajaxfolder/ajax_features.php [Wed Sep 28 10:45:41 2011] [warn] mod_fcgid: can't apply process slot for /xxx/statics/poll/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php There is RAM free and, indeed, it seems that more php processes get spawned. /server-status shows lots of threads in the "W" state as well as some FastCGI processes in "Exiting(communication error)" state. I rebuilt mod_fcgid from source as the packaged version was quite old. It's using current stable version (2.3.6) of mod_fcgid. FCGI config: FcgidBusyScanInterval 30 FcgidBusyTimeout 60 FcgidIdleScanInterval 30 FcgidIdleTimeout 45 FcgidIOTimeout 60 FcgidConnectTimeout 20 FcgidMaxProcesses 100 FcgidMaxRequestsPerProcess 500 FcgidOutputBufferSize 1048576 System info: Linux xxx.com 2.6.28-11-server #42-Ubuntu SMP Fri Apr 17 02:45:36 UTC 2009 x86_64 GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.04 DISTRIB_CODENAME=jaunty DISTRIB_DESCRIPTION="Ubuntu 9.04" Apache info: Server version: Apache/2.2.11 (Ubuntu) Server built: Aug 16 2010 17:45:55 Server's Module Magic Number: 20051115:21 Server loaded: APR 1.2.12, APR-Util 1.2.12 Compiled using: APR 1.2.12, APR-Util 1.2.12 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" Apache modules loaded: alias.load auth_basic.load authn_file.load authz_default.load authz_groupfile.load authz_host.load authz_user.load autoindex.load cgi.load deflate.load dir.load env.load expires.load fcgid.load headers.load include.load mime.load negotiation.load rewrite.load setenvif.load ssl.load status.load suexec.load PHP info: PHP 5.2.6-3ubuntu4.6 with Suhosin-Patch 0.9.6.2 (cli) (built: Sep 16 2010 19:51:25) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies

    Read the article

  • Browser sends http request with RANGE

    - by nute
    I have a local testing environment in a Fedora virtual machine. Strangely, resources (css and js files) don't seem to work. Looking at Firebug, I see that the browser sends the HTTP request with "Range bytes=0-". The server responds with either an empty 200OK or an empty 206 Partial Content. Here is an example: Response Headers Date Mon, 23 Nov 2009 23:33:26 GMT Server Apache/2.2.13 (Fedora) Last-Modified Thu, 19 Nov 2009 22:58:55 GMT Etag "18-3aec-478c14dbee138" Accept-Ranges bytes Content-Length 15084 Content-Range bytes 0-15083/15084 Connection close Content-Type text/css Request Headers Host fedora.test User-Agent Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091105 Fedora/3.5.5-1.fc11 Firefox/3.5.5 Accept text/css,*/*;q=0.1 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 300 Connection keep-alive Referer http://fedora.test/pictures/ Cookie __utma=26341546.1613992749.1258504422.1258569125.1258752550.4; __utmz=26341546.1258504422.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); PHPSESSID=tqf8jfmc77qihe97rl4tmhq685 Range bytes=0- If-Range "18-3aec-478c14dbee138" I don't know if the browser is sending the wrong request, or if it's the server that is doing this. Request made to the outside (such as google analytics) are working fine. This is running in Fedora 11 in VirtualBox. Apache. PHP. The files are being served through the "shared folders" feature of VirtualBox (could it be related?). No error logs could help me.

    Read the article

  • Dependency issue installing PostGIS on CentOs 6.3

    - by Nyxynyx
    I am new to linux and is trying to install PostGIS2 after successfully installing PostgreSQL 9.1. The machine is running CentOS 6.3 and has cPanel installed. Problem: When I tried installing PostGIS using yum: yum install postgis2_91 postgis2_91-utils, I get the dependency error below. How should I solve this dependency problem and install PostGIS? Thank you so much! --> Finished Dependency Resolution Error: Package: postgis2_91-utils-2.0.1-1.rhel6.i686 (pgdg91) Requires: perl-DBD-Pg Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libdapserver.so.7 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libdap.so.11 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libgeotiff.so.1.2 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libnetcdf.so.6 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libdapclient.so.3 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libhdf5.so.6 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: librx.so.0 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libogdi.so.3 Error: Package: gdal-1.7.2-1.el6.i686 (pgdg91) Requires: libcfitsio.so.0 You could try using --skip-broken to work around the problem ** Found 6 pre-existing rpmdb problem(s), 'yum check' output follows: bandmin-1.6.1-5.noarch has missing requires of perl(bandmin.conf) bandmin-1.6.1-5.noarch has missing requires of perl(bmversion.pl) bandmin-1.6.1-5.noarch has missing requires of perl(services.conf) exim-4.77-1.i386 has missing requires of perl(SafeFile) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 sendmail-cf-8.14.4-8.el6.noarch has missing requires of sendmail = ('0', '8.14.4', '8.el6') Update An error still remains: Error: Package: postgis2_91-utils-2.0.1-1.rhel6.i686 (pgdg91) Requires: perl-DBD-Pg You could try using --skip-broken to work around the problem ** Found 6 pre-existing rpmdb problem(s), 'yum check' output follows: bandmin-1.6.1-5.noarch has missing requires of perl(bandmin.conf) bandmin-1.6.1-5.noarch has missing requires of perl(bmversion.pl) bandmin-1.6.1-5.noarch has missing requires of perl(services.conf) exim-4.77-1.i386 has missing requires of perl(SafeFile) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 sendmail-cf-8.14.4-8.el6.noarch has missing requires of sendmail = ('0', '8.14.4', '8.el6')

    Read the article

  • Authenticate users with Zimbra LDAP Server from other CentOS clients

    - by efesaid
    I'am wondering that how can integrate my database,web,backup etc.. centos servers with Zimbra LDAP Server. Does it require more advanced configuration than standart ldap authentication ? My zimbra server version is [zimbra@zimbra ~]$ zmcontrol -v Release 8.0.5_GA_5839.RHEL6_64_20130910123908 RHEL6_64 FOSS edition. My LDAP Server status is [zimbra@ldap ~]$ zmcontrol status Host ldap.domain.com ldap Running snmp Running stats Running zmconfigd Running I already installed nss-pam-ldapd packages to my servers. [root@www]# rpm -qa | grep ldap nss-pam-ldapd-0.7.5-18.2.el6_4.x86_64 apr-util-ldap-1.3.9-3.el6_0.1.x86_64 pam_ldap-185-11.el6.x86_64 openldap-2.4.23-32.el6_4.1.x86_64 My /etc/nslcd.conf is [root@www]# tail -n 7 /etc/nslcd.conf uid nslcd gid ldap # This comment prevents repeated auto-migration of settings. uri ldap://ldap.domain.com base dc=domain,dc=com binddn uid=zimbra,cn=admins,cn=zimbra bindpw **pass** ssl no tls_cacertdir /etc/openldap/cacerts When i run [root@www ~]# id username id: username: No such user But i am sure that username user exist on ldap server. EDIT : When i run ldapsearch command i got all result with credentials and dn. [root@www ~]# ldapsearch -H ldap://ldap.domain.com:389 -w **pass** -D uid=zimbra,cn=admins,cn=zimbra -x 'objectclass=*' # extended LDIF # # LDAPv3 # base <dc=domain,dc=com> (default) with scope subtree # filter: objectclass=* # requesting: ALL # # domain.com dn: dc=domain,dc=com zimbraDomainType: local zimbraDomainStatus: active . . .

    Read the article

  • Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

    - by db2
    Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

    Read the article

  • ghettoVCB issue

    - by romgo75
    I have setup a ghettoVCB script in order to backup three VM. I put it in a crontab but I have an issue. In my backup folder I have 3 different folders, one for each VM. In each folder I have the following files: -rw-r--r-- 1 root root 1263 Mar 17 01:51 vm1-2010-03-16--2.gz -rw-r--r-- 1 root root 1263 Mar 17 00:41 vm1-2010-03-16--3.gz -rw-r--r-- 1 root root 1261 Mar 18 01:22 vm1-2010-03-17--1.gz drwxr-xr-x 1 root root 980 Mar 19 23:39 vm1-2010-03-19 The problem is the last folder. It seems that a backup didn't finish the process. When I read the logs concerning this folder I get: 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/datastore1/backup/ 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2010-03-19 23:00:01 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2010-03-19 23:00:01 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-03-19 23:00:01 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-03-19 23:00:01 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-03-19 23:00:01 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-03-19 23:00:01 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-03-19 23:00:01 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-03-19 23:00:01 -- info: CONFIG - LOG_LEVEL = info 2010-03-19 23:00:01 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-03-19 23:00:01 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all http://... 2010-03-19 23:39:35 -- info: Initiate backup for vm1 2010-03-19 23:39:35 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-19" for vm1 Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1_1.vmdk'... ^MClone: 0% done.^MClone: 1% done.^MClone: 2% done.^MClone: 3% done.^MClone: 4% done.^MClone: 5% done.^MClone: 6% done.^MClone: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone Failed to clone disk : The file already exists (39). Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1.vmdk'... 2010-03-20 00:46:20 -- info: Removing snapshot from vm1 ... one: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone: 10% done.^MClone: 11% done.^MClone: 12% done.^MClone: 13% done.^MClone: 14% done.^MClone: 15% done.^MClone: 16% done.^MCl 2010-03-19 23:51:19 -- info: Removing snapshot from vm1 ... I can't run ghettoVCB anymore because the VM has a snapshot which has not been deleted. I know how to delete the snapshot, but I don't know why the VCB script is not able to handle rotation of the VM backups? Any ideas? Thanks!

    Read the article

  • centos 6 debuginfo repository does not have httpd debug version available

    - by Zippy Zeppoli
    I am trying to get the debug version of httpd so I can use it in conjunction with gdb. I am having a hard time getting them, and they don't seem to be in the standard epel-debuginfo repository. What should I do? > [root@buildbox-rhel6 ~]# debuginfo-install httpd Loaded plugins: fastestmirror, presto enabling epel-debuginfo Loading mirror speeds from cached hostfile epel-debuginfo/metalink | 8.3 kB 00:00 * base: mirrors.cicku.me * epel: mirrors.kernel.org * epel-debuginfo: mirrors.kernel.org * extras: mirrors.arpnetworks.com * updates: linux.mirrors.es.net epel-debuginfo | 3.1 kB 00:00 epel-debuginfo/primary_db | 487 kB 00:01 Checking for new repos for mirrors Could not find debuginfo for main pkg: httpd-2.2.15-15.el6.centos.1.x86_64 Could not find debuginfo pkg for dependency package apr-1.3.9-5.el6_2.x86_64 Could not find debuginfo pkg for dependency package apr-util-1.3.9-3.el6_0.1.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package db4-4.7.25-17.el6.x86_64 Could not find debuginfo pkg for dependency package expat-2.0.1-11.el6_2.x86_64 Could not find debuginfo pkg for dependency package openldap-2.4.23-26.el6_3.2.x86_64 Could not find debuginfo pkg for dependency package openldap-2.4.23-26.el6_3.2.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package pcre-7.8-4.el6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package libselinux-2.0.94-5.3.el6.x86_64 Could not find debuginfo pkg for dependency package zlib-1.2.3-27.el6.x86_64 No debuginfo packages available to install

    Read the article

  • Weird Apache Crash (with Dump) zend_hash_find (), libphp5.so

    - by Jacob84
    To be honest I don't have experience working with Apache. I'm just putting the best of my intentions on solving this and don't know if I'm making it right. So any help will be greatly appreciated. We have a php page wich is throwing the following message in the browser: Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. The logs from /var/log/httpd doesn't seem to help because It seems that the Apache is unable to write any information. So the exception or error is preventing the writing (maybe ocurring in some stage of the process that makes impossible to log?). I've read about the procedure to make dumps of the apache, and here we have the content: Reading symbols from /lib64/libgpg-error.so.0...(no debugging symbols found)...done. Loaded symbols for /lib64/libgpg-error.so.0 Reading symbols from /usr/lib64/php/modules/zip.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/php/modules/zip.so Core was generated by `/usr/sbin/httpd'. Program terminated with signal 11, Segmentation fault. 0 0x00007fb828fff712 in zend_hash_find () from /etc/httpd/modules/libphp5.so Missing separate debuginfos, use: debuginfo-install httpd-2.2.15-15.el6.centos.1.x86_64 I've been looking in the PHP files and I haven't found any direct call to zend_hash_find (wich seems to be causing the error). I've been looking at Google but found nothing related. Can somebody please help? Is there any step that I need to accomplish to know more? Thanks a lot, as always!

    Read the article

  • Wireless access point -> Powerline -> Router -> Internet, should this work?

    - by Anthony
    My network at home used to be a laptop and desktop connected wirelessly to a single Wireless ADSL router, a Cisco 877W. Wireless reception around the house with this setup was quite unreliable, so I've gone about looking to improve it. I purchased some Belkin Gigabit powerline adapters and I've got these working fine. I can hook a computer up to one of the powerline adapters, and with the other one plugged into the ADSL router the computer has internet access. Additionally I can hook a Netgear DG834G Wireless ADSL router into it with the adsl not plugged in, and after turning off DHCP can RJ45 a computer up to the network. Everything works fine. However, if I setup a wireless network on the Netgear then any computer that connects wirelessly to it cannot access the internet. It gets an IP address very slowly via DHCP which is a good one, but it cannot access the internet. It can however communicate with the RJ45'd computer also connected to the Netgear. I wondered whether this could be a problem with the Netgear so I've borrowed a Cisco Aironet 1200 and got this working fine when it's attached directly to the primary ADSL router. I can connect to it wireless and get onto the internet. However, if I then plug it into the Netgear I can communicate with other devices attached to the Netgear, but can't get any further than the Netgear. All the while though the other devices RJ45'd to the Netgear are communicating with the internet just fine. I'm starting to suspect it's one of two things causing the problem: 1) For some reason the belkin powerline adapters don't like carrying wireless-originating signals. Could this be possible? 2) The primary Cisco ADSL router doesn't want to communicate with other devices on my network more than one hop away from it. I'm making an assumption here that within the Netgear box the wireless and wired sides are handled differently. Could this be true? Has anyone successfully setup something similar to what I'm trying, with a wireless device on the otherside of a pair of powerline connectors? Update 06/07/2010 - Response to irrational John 28 June Thanks for the answer John - and for clearing up some of my questions. The model number of the belkin powerline adapters are F5D4076. Security was apparently enabled by default on them, and I didn't change them from their default setting. The network diagram in your answer shows exactly what I'm trying to setup: I've followed that guide and I'm still not able to get things working properly. The thing that perplexes me is that wired network traffic works just fine - it's only the wireless traffic that doesn't. This is with the same laptop, and the same DHCP or static IPs. "1. What IP addresses did you assign to each router? What subnet masks are you using?" - subnet is 255.255.255.0, the router connected to the adsl is 192.168.153.1 and that has the DHCP server. The access point on the other side of the powerline adapters I've tried both a static IP of 192.168.153.110, same subnet, and a DHCP-assigned IP. The other devices are DHCP, although I also tried manually entering IP settings. "2. Have you correctly enabled DHCP on only one of the routers and disabled it on all the others?" Yes I have - only the internet-connected router has DHCP enabled. The IP range for the DHCP is from 192.168.153.11 - 192.168.153.200. The strange thing is that wired connections work fine on the LAN, plugged into any router, work fine - it's only the wireless connections that aren't working when they're plugged into the non-primary AP. "Since the routers you are using appear to integrate an ADSL modem I'm assuming there is no WAN port on them." There's no NAT within the LAN, and all wired connections are connected to LAN ports. It's something wrong with the wireless - wired works fine throughout the whole LAN. Update 06/07/2010 - Response to irrational John 29 June The diagram you've drawn in your answer shows pretty much exactly what I'm trying to do. I've spent another evening trying different things and made some progress but I'm still scratching my head. I've borrowed a Netgear access point and been trying with this, and the strange thing is that my PC is working now - this is a Windows 7 PC connected to the access point in the position of where the DG834G is in the diagram. Meanwhile, however, I have an old Powerbook G4 12" I use for music, and while that has a DHCP-assigned IP address, it's not getting any network throughput to either LAN or internet addresses. To make matters more strange, my phone appears to be intermittently working when it's on the wifi. The access point is a Netgear WPN802v1, DHCP, NAT both switched off, running firmware 2.0.9.0. Last night I set it up with exactly the same settings, and similar to tonight I could get a couple of devices to work, and a couple not to. By the morning, however, everything had stopped working - nothing could get a DHCP IP address. I rebooted the 877W earlier this evening and I'm wondering whether this is why a few things are working now. "Could it be possible that the issue could be with the 877W?" I didn't configure this - is it possible that the DHCP server only likes assigning devices that are immediately attached to it? Or similar, could a firewall be stopping too many addresses that are coming through one device? (ie. the Access Point) This could explain why devices are working at the start but then not by the end. In reply to your questions, "1. I looked at the Netgear DG834G support page. There are five versions of this router. Which version do you have? Netgear usually lists this on the label on the bottom of the router. What version of the firmware does it have?" It's a DG834Gv3, and the firmware is the last on the netgear site version 4.01.40. "3. Not knowing which version you have, I glanced at the reference manual for the DG834G v3. In the section for Wireless Settings under the subsection Wireless Access Point there is a check box for a Wireless Isolation setting. If you have this setting it should be off/unchecked. If it is checked then any device connected via wireless would not be able to talk to any other device on the LAN. This sounds like your problem so maybe this is the cause?" I've checked this and it's switched off. I've made a change to the IP of the access point to something outside the DHCP range - it's now 192.158.153.5, with DHCP starting at 11 and going up to 254. Thanks for the tip about this - I only have a few devices so wouldn't anticipate the DHCP server assigning up to 110, but better safe than sorry. Finally one more thing I thought I should add, is with the Powerbook G4 that's not working - it's getting a DHCP IP address and it can communicate with the WPN802 as I can visit the administration page. Anything further than this, however, it can't reach; I can't administrate the 192.168.153.1 (877W router). Strangely, however, when I open Finder on the same powerbook it's detecting my NAS which is attached directly via wire to the 877W. If I try to browse it, it says connection failed. RE: "Perhaps the problem with your Powerbook is with DNS?.." The IP settings on the powerbook are identical to that of the PC with the exception of the IP address; the PC is 192.168.153.17 and the powerbook is 192.168.153.12. Subnets are the same, 255.255.255.0 and default gateway is the same, .1, and the DNS servers are the same. I administrate the 877W by going to 192.168.153.1 in the browser. This is what isn't working from the Powerbook, despite the PC working fine when I do the same. Meanwhile, however, I can administrate the AP on 192.168.153.5 from both PC and Powerbook Update 06/07/2010 - FINAL RESOLUTION of sorts: First off, sorry for the length of this question. I need start to practice a more concise writing style, so I'm going to try to keep this bit brief. After much fiddling, and with the hugely-appreciated help of irrational John, I have come to the conclusion that it's something wrong with the powerbook. I believe that this was perhaps the reason I doubted things worked at the very beginning. I now have the original DG834Gv3 running both wirelessly and wired, and both wired devices and wireless devices get internet connectivity. The only anomaly is the powerbook which I've had to keep wired, as no matter what I do it refuses to work wirelessly. I still have suspicions that the 877W isn't quite right; I'm fairly sure that if I RJ45 the powerline adapter into a different LAN port on it then everything will break. I've just about run out of patience to test this further, and I think I need to go into the 877W's config to match the 877w's lan port's settings. I'm accepting irrational John's answer as he's been enormously helpful, way above the call of duty, and for this line he wrote: Beats the heck out of me. which in the midst of great frustration made me chuckle, and for a sentence in one of his comments to the same answer: If it is specific to the Powerbook I would put that issue aside until after you feel you have the rest of your LAN and the additional WAP all working together correctlyt It was this second sentence that made me put the powerbook aside and concentrate on the other devices that ultimately led me to getting things working.

    Read the article

  • Sender's Sendmail says "stat=Sent" but recipent doesn't receive the message

    - by user44774
    Guys, I am trying to figure out why sendmail is saying that it sends out an email but I actually never get it. This is from the logs when the email is being sent out: I have replaced the email address with some fake address and I have also replaced the name of the server with a fake hostname. The most significant point of this information from the logs is that it shows that the "Message was accepted for delivery". Do you guys have any suggestions as to why it seems like the message goes out but I never get the actual email? Jun 2 14:34:40 server sendmail[9668]: o52IYeSi009668: --- 250 2.0.0 o52IYeSi009668 Message accepted for delivery Jun 2 14:34:40 server sendmail[9667]: o52IYe9I009667: [email protected], ctladdr=rick (500/500), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30058, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o52IYeSi009668 Message accepted for delivery) Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: <-- QUIT Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: --- 221 2.0.0 server.server.com closing connection Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: SMTP outgoing connect on [192.168.1.9] Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: to=<[email protected]>, ctladdr=<[email protected]> (500/500), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120368, relay=mailhost.worldnet.att.net. [207.115.11.17], dsn=5.1.1, stat=User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYeSi009668: o52IYgSi009670: DSN: User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYgSi009670: to=<[email protected]>, **delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31625, dsn=2.0.0,** ***stat=Sent*****

    Read the article

  • How to find cause of main file system going to read only mode

    - by user606521
    Ubuntu 12.04 File system goes to readonly mode frequently. First of all I have read this question file system is going into read only mode frequently already. But I have to know if it's not caused by something else than dying hard drive. This is server provided by my client and I am just runing there some node.js workers + one node.js server and I am using mongodb. From time to time (every 20-50h) system suddenly makes filesystem read only, mongodb process fails (due read-only fs) and my node workers/server (which are started by forever) are just killed. Here is the log from dmesg - I can see there some errors and messages that FS is going to read-only, and there is also some JOURNAL error but I would like to find cause of those errors.. http://speedy.sh/Ux2VV/dmesg.log.txt edit smartctl -t long /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-23-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net SMART support is: Unavailable - device lacks SMART capability. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. What I am doing wrong? Same is for sda2. Morover now when I type any command that not exists in shell I get this: Sorry, command-not-found has crashed! Please file a bug report at: https://bugs.launchpad.net/command-not-found/+filebug Please include the following information with the report:

    Read the article

  • Unknown Apache2 + PHP5 FastCGI 500 error .. caused by search engine bots?

    - by rdjurovich
    My Ubuntu server is configured with Apache 2.2.8 and PHP 5.2.4-2ubuntu5.18 in FastCGI mode. Everything works well, except I am seeing 500 errors that only seem to come from bots accessing the server.. for example (access.log): x.125.71.104 - - [16/Nov/2011:10:27:39 +1100] "GET / HTTP/1.1" 500 41377 "-" "Mozilla/5.0 (compatible; Baiduspider/2.0; +http://www.baidu.com/search/spider.html)" x.40.103.239 - - [16/Nov/2011:11:05:56 +1100] "GET / HTTP/1.0" 500 14717 "-" "Mozilla/5.0 (compatible; mon.itor.us - free monitoring service; http://mon.itor.us)" x.249.67.114 - - [14/Nov/2011:20:57:17 +1100] "GET / HTTP/1.1" 500 101 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" x.55.39.85 - - [14/Nov/2011:19:31:06 +1100] "GET / HTTP/1.1" 500 7032 "-" "msnbot/2.0b (+http://search.msn.com/msnbot.htm)._" It is my understanding that a 500 error will be thrown when the PHP process fails to respond to Apache, which could be caused by a fatal PHP error or if PHP runs out of processes.. so my assumption is that either the bots are hitting the server too hard, killing the PHP processes, or something in the request header from bots is causing a fatal error in my PHP script? If anyone can offer advice on this it would be greatly appreciated! Ryan

    Read the article

  • Google Chrome does not launch after some months without using it in Windows XP/Seven

    - by kokbira
    Well, I have in computers I use with Windows XP or Seven more than one browser installed on them, generally Internet Explorer 8, Firefox 4, Opera 11 and Google Chrome. I often use Firefox, but I want to use Google Chrome sometimes because I have a lot of addons and webapps on it. The issue is: when I try to execute Chrome after some months without using it, it does not function. Using Proccess Explorer or Task Manager, I can see that there is not any Google proccesses running. Then I reinstall it and all functions. But if I do not use it for some months again, it will not function... Is it an update problem? Must I use Chrome everyday or is there another way to avoid that issue? PS: I installed English and Portuguese last versions (how to get the version numbers when it does not execute?), not at the same time, and it continues to do not launch... PS2: There is a running Google Update proccess that is launched in startup: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run    Name:            Google Update    Type:            REG_SZ    Data:            "C:\Users\Ubirajara\AppData\Local\Google\Update\GoogleUpdate.exe" /c

    Read the article

  • ghettoVCB issue

    - by romgo75
    Hi, I setup ghettoVCB script in order to backup 3 VM. I put it in a crontab but I have an issue. In my backup folder I have 3 different folder, one for each VM. For each Folder I have th following files : -rw-r--r-- 1 root root 1263 Mar 17 01:51 vm1-2010-03-16--2.gz -rw-r--r-- 1 root root 1263 Mar 17 00:41 vm1-2010-03-16--3.gz -rw-r--r-- 1 root root 1261 Mar 18 01:22 vm1-2010-03-17--1.gz drwxr-xr-x 1 root root 980 Mar 19 23:39 vm1-2010-03-19 The problem is the last folder. It seems that a backup didn't finished the process. When I read the logs concerned by this folder I get : 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/datastore1/backup/ 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2010-03-19 23:00:01 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2010-03-19 23:00:01 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-03-19 23:00:01 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-03-19 23:00:01 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-03-19 23:00:01 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-03-19 23:00:01 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-03-19 23:00:01 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-03-19 23:00:01 -- info: CONFIG - LOG_LEVEL = info 2010-03-19 23:00:01 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-03-19 23:00:01 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all http://... 2010-03-19 23:39:35 -- info: Initiate backup for vm1 2010-03-19 23:39:35 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-19" for vm1 Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1_1.vmdk'... ^MClone: 0% done.^MClone: 1% done.^MClone: 2% done.^MClone: 3% done.^MClone: 4% done.^MClone: 5% done.^MClone: 6% done.^MClone: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone Failed to clone disk : The file already exists (39). Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1.vmdk'... 2010-03-20 00:46:20 -- info: Removing snapshot from vm1 ... one: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone: 10% done.^MClone: 11% done.^MClone: 12% done.^MClone: 13% done.^MClone: 14% done.^MClone: 15% done.^MClone: 16% done.^MCl 2010-03-19 23:51:19 -- info: Removing snapshot from vm1 ... I can't run anymore ghetto VCB because the VM has a snapshot which has not been deleted. I know how to delete the snapshot, but I don't know why the VCB script is not able to handle vm abckup rotate ? Any idea ? Thanks !

    Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >