Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 295/778 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

  • How to securely enable file sharing over PPTP on Windows 2008 Server

    - by Damage
    I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

    Read the article

  • Automate Windows 7's file sharing and firewall settings

    - by nhinkle
    I am working with my school to customize Windows 7 on some new laptops we are receiving. The laptops come with Windows 7 Professional already installed, and we do not need or want to reimage them. We would however like to customize the installation once it is in place, through a series of scripts. We will also be deploying these scripts to computers which have already been set up. Most of the settings we wish to change can be done easily from the command line or with a registry file. However, there is one thing we keep getting hung up on: networking options. Is there any unattended way to set the Windows 7 networking configuration? We would like to set the following things automatically, which are found under Control Panel > Network and Sharing Center > Advanced sharing settings > Home or Work network: Turn on network discovery Turn on printer and file sharing Turn off public folder sharing Turn on password protected sharing Use user accounts and passwords to connect to other computers We also need to configure the firewall to allow the following exceptions: File and printer sharing Remote assistance Remote desktop Remote scheduled tasks management Remote service management Windows remote management I've looked around, and can't find any way to change these things - I looked into netsh, registry settings, and even used RegMon to watch while I changed the values manually, all to no avail. Google hasn't offered up anything helpful so far. If anyone could provide some insight, I would very much appreciate it. I did find out that much of this is configurable with group policy, but because these computers are in a workgroup, not a domain, I don't know of any way to take advantage of that in an unattended manner.

    Read the article

  • How to get decent WiFi despite a virtual Faraday cage

    - by MT_Head
    One of my clients is the local branch of an international airline. They have a small office in the secured area behind the ticket counters, and timeshare space at the ticket counter. I need to add a ticket printer out front, which I cannot (for contract/liability reasons) attach to the shared computer at the counter; the only workable solution seems to be to put the printer and its attached computer on a cart and connect to the office's network via WiFi. So far, no problem - right? Well, the terminal has been getting a facelift, which - among other things - includes decorative stainless-steel panels along the wall behind the ticket counters. This paneling acts as a seriously effective barrier to WiFi! The office's WiFi router - a brand-new D-Link DIR-815, dual-band 802.11n - is just on the other side of the pictured wall, and twenty feet or so to the right. And yet the only way I can connect AT ALL on this side of the wall is to stick the USB adapter (on the end of an extension cable) right into the crack between panels... and even then I can only see the 5GHz network, and that very weakly. Has anyone else had experience with this sort of misguided interior decoration? Any ideas on how I can improve reception on the other side of the barrier? (Needless to say, physical modifications of the environment - tempting though they might be - are strictly no-go.)

    Read the article

  • Why does my Belkin wireless router has eMule port open?

    - by Jeremy Powell
    I have a Belkin F6D4230-4 v1 router. When I port scan it with nmap I get the following: $ sudo nmap -sS -A -T5 192.168.2.1 -p- Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-17 11:40 CDT Interesting ports on 192.168.2.1: Not shown: 65532 closed ports PORT STATE SERVICE VERSION 80/tcp open http Belkin 2307 wifi router http config (IP_SHARER httpd 1.0) |_ html-title: '+i1+' 4661/tcp filtered unknown 4662/tcp filtered edonkey MAC Address: 00:22:75:5D:52:D8 (Belkin International) Device type: WAP|broadband router|firewall|printer|specialized|webcam Running (JUST GUESSING) : Linksys embedded (95%), TRENDnet embedded (95%), Netgear embedded (92%), Canon embedded (89%), On Time RTOS (89%), Symantec embedded (89%), D-Link embedded (86%), Polycom embedded (85%) Aggressive OS guesses: Linksys WRT54GC or TRENDnet TEW-431BRP wireless broadband router (95%), TRENDnet TW100-BRF114 broadband router (95%), Netgear FR114P ProSafe VPN firewall (92%), Canon PIXMA MX850 printer (89%), On Time RTOS (89%), Symantec Firewall/VPN 100 (89%), D-Link DI-714P+ wireless broadband router (86%), Polycom ViewStation video conferencing system (85%) No exact OS matches for host (test conditions non-ideal). Network Distance: 1 hop Service Info: Device: WAP OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 21.57 seconds Why are the 4461 and 4462 ports open? This is a basic, out-of-the-box installation.

    Read the article

  • TLS (STARTTLS) Failure After 10.6 Upgrade to Open Directory Master

    - by Thomas Kishel
    Hello, Environment: Mac OS X 10.6.3 install/import of a MacOS X 10.5.8 Open Directory Master server. After that upgrade, LDAP+TLS fails on our MacOS X 10.5, 10.6, CentOS, Debian, and FreeBSD clients (Apache2 and PAM). Testing using ldapsearch: ldapsearch -ZZ -H ldap://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ... fails with: ldap_start_tls: Protocol error (2) Testing adding "-d 9" fails with: res_errno: 2, res_error: <unsupported extended operation>, res_matched: <> Testing without requiring STARTTLS or with LDAPS: ldapsearch -H ldap://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ldapsearch -H ldaps://gnome.darkhorse.com -v -x -b "dc=darkhorse,dc=com" '(uid=donaldr)' uid ... succeeds with: # donaldr, users, darkhorse.com dn: uid=donaldr,cn=users,dc=darkhorse,dc=com uid: donaldr # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 result: 0 Success (We are specifying "TLS_REQCERT never" in /etc/openldap/ldap.conf) Testing with openssl: openssl s_client -connect gnome.darkhorse.com:636 -showcerts -state ... succeeds: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:SSLv3 read server hello A depth=1 /C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department verify error:num=19:self signed certificate in certificate chain verify return:0 SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A --- Certificate chain 0 s:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=MIS/CN=gnome.darkhorse.com i:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department 1 s:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department i:/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department --- Server certificate -----BEGIN CERTIFICATE----- <deleted for brevity> -----END CERTIFICATE----- subject=/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=MIS/CN=gnome.darkhorse.com issuer=/C=US/ST=Oregon/L=Milwaukie/O=Dark Horse Comics, Inc./OU=Dark Horse Network/CN=DHC MIS Department --- No client certificate CA names sent --- SSL handshake has read 2640 bytes and written 325 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: D3F9536D3C64BAAB9424193F81F09D5C53B7D8E7CB5A9000C58E43285D983851 Session-ID-ctx: Master-Key: E224CC065924DDA6FABB89DBCC3E6BF89BEF6C0BD6E5D0B3C79E7DE927D6E97BF12219053BA2BB5B96EA2F6A44E934D3 Key-Arg : None Start Time: 1271202435 Timeout : 300 (sec) Verify return code: 0 (ok) So we believe that the slapd daemon is reading our certificate and writing it to LDAP clients. Apple Server Admin adds ProgramArguments ("-h ldaps:///") to /System/Library/LaunchDaemons/org.openldap.slapd.plist and TLSCertificateFile, TLSCertificateKeyFile, TLSCACertificateFile, and TLSCertificatePassphraseTool to /etc/openldap/slapd_macosxserver.conf when enabling SSL in the LDAP section of the Open Directory service. While that appears enough for LDAPS, it appears that this is not enough for TLS. Comparing our 10.6 and 10.5 slapd.conf and slapd_macosxserver.conf configuration files yields no clues. Replacing our certificate (generated with a self-signed ca) with an Apple Server Admin generated self signed certificate results in no change in ldapsearch results. Setting -d to 256 in /System/Library/LaunchDaemons/org.openldap.slapd.plist logs: 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 EXT oid=1.3.6.1.4.1.1466.20037 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 do_extended: unsupported operation "1.3.6.1.4.1.1466.20037" 4/13/10 5:23:35 PM org.openldap.slapd[82162] conn=384 op=0 RESULT tag=120 err=2 text=unsupported extended operation Any debugging advice much appreciated. -- Tom Kishel

    Read the article

  • Windows file sharing with a private LAN when a public VPN is connected?

    - by netvope
    OS: Windows Vista My LAN interface is configured as a "private network". I want to have all the sharing and discovery features (Network Discovery, File Sharing, Public Folder Sharing, Printer Sharing, Password Protected Sharing, and Media Sharing), so I enabled them all. My VPN interfaces are configured as "public networks", and I do NOT want to have any of the above features. Now the problem is that if I disabled these sharing features while a VPN is connected, it affects both interfaces. I guess the Network and Sharing Center is probably an oversimplified tool that may not support multiple interfaces. Where can I tell Windows to enable sharing features for the private networks and not the public networks? For file sharing, I think I can disable "File and Printer Sharing for MS Networks" in each of the VPNs' properties. However, I will need to disable it every time I add a new VPN. Moreover, I can't find how to disable Media Sharing by this way. If this can be more easily done in Windows XP or 7, please let me know.

    Read the article

  • Can I run a mix of static addressing and NAT?

    - by aroth
    Let's say that an ISP offers a plan with 5 static IP addresses, but I have more than 5 devices, many of which (such as a networked printer, for instance) I do not want or need to have a static IP address. So the topography I'm planning goes something like: ISP -> Router -> Switch -> Computer (static address) -> Computer (static address) -> Printer (DHCP/NAT) -> Tv (DHCP/NAT) -> (...) -> Wireless Devices (DHCP/NAT) Generally speaking, is it possible to run a network like that? If not, then what sort of setup do I need so that I can assign static addresses just to the things that need them, and use DHCP/NAT for everything else? Also, what internal networking devices will consume a static IP address? I'm pretty sure the router will, correct? Does the switch also?

    Read the article

  • Mystery Print Separator Page

    - by Jesse Bradlee
    Good morning! After a recent site upgrade to WebSphere 7.0 from 6.1 on an AIX server, our users reported a print separator page appearing on a certain type of report, and only on one printer. Trouble is, no one (devs, sysadmins, users) knows where it came from or where to turn it off. Based on the info, the first step was to check the app, but we don't have print separators in our code. The report they're using also lacks even an option to separate. Then I asked the WebSphere gurus but they shook their heads. Ditto the network/print server team. If anyone can identify the source of this separator, I can take that back to the relevant team and have it switched off. They look like this (some whitespace removed for brevity): *################################################## *################################################## *################################################## *************************************************** TITLE: [document name] TIME PRINTED: Fri Sep 20 08:21:45 2013 TIME QUEUED: Fri Sep 20 08:21:45 2013 PRINTED AT: hp@hp41 (generic) @ [app name] SUBMITTED BY: root DELIVER TO: =====> root <===== *************************************************** FLAG VALUES: a-0, b=0, d=a, f=, g=1, h=, i=0, j=+, l=00, p=10, t=0, v=6, w=3--, x=2, A=1, B=gn, C=!, H=, J=+, L=+, N=1, P=[printer name]:hp@hp41, X=ISO8859-1, Z=+, 0=ibm.850 *************************************************** Thank you!

    Read the article

  • Purge print driver cache on windows 7 with powershell script

    - by Doltknuckle
    [Background] We have been having trouble with our network clients suddenly being unable to print. They get an odd error with a hex code. We determined that something in the driver was messed up and we could resolve the issue by clearing the driver cache and reinstalling the driver. This happens to random computers every so often. We're assuming this is a bug with the latest Dell 2330dn driver since that is the only model that has this problem. [Problem] What we are looking to do is write a Powershell script that would clear the driver cache and redownload the driver. I see a ton of scripts out there to manage queues, servers, and ports, but nothing for local driver cache management. [Current Workaround] Since we have to do this manually, I'll write out the steps so you know what we want this script to replicate. Disable print spooler Restart machine Delete contents of: C:\windows\system32\spool\drivers\w32x86 Enable print spooler and start service. Delete the network printer object and re-add network printer off of server. [Request] I'm good enough with powershell to translate the above workaround into a pair of scripts. I'd like to find a more elegant solution then my current workaround. Any suggestions?

    Read the article

  • Windows cant repair even with sfc /scannow

    - by GeekyDewd
    Clean install of windows 8, then installed the windows 8.1 update (after all other updates). CBS Log: CBS Log on Google Drive Important pieces of the log: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:38, Info CSI 00000505 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000506 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:40, Info CSI 00000507 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000508 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:35:43, Info CSI 00000509 [DIRSD OWNER WARNING] Directory [ml:520{260},l:138{69}]"\??\C:\WINDOWS\System32\WindowsPowerShell\v1.0\Modules\NetSecurity\en" is not owned but specifies SDDL in component Networking-MPSSVC-WMI.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral And: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:12, Info CSI 00000888 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 00000889 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:13, Info CSI 0000088a [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 0000088b [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:42:13, Info CSI 0000088c [SR] Repair complete

    Read the article

  • how does openvpn decide which interface to get IP addrs from

    - by bkrupa
    Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

    Read the article

  • Possible to IPSec VPN Tunnel Public IP Addresses?

    - by caleban
    A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

    Read the article

  • I need scanning software to use with my scanner.

    - by D Connors
    So, I got this (HP F4280) printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

    Read the article

  • Have to dhclient each restart to access internet

    - by Zeophlite
    So each time I restart my ubuntu server (virtual 10.04, via Xencenter), I have to call dhclient before I can access the internet: http://img813.imageshack.us/i/dhclient.png/ What do I need to change to get internet access automatically? Apologies for posting images, I'm using Xencenter, so I can't copy/paste the console output EDIT:: daniel@workwork:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.69.136 netmask 255.255.255.0 network 192.168.69.0 broadcast 192.168.69.255 gateway 192.168.69.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.69.120 dns-search workwork.com.au daniel@workwork:~$ ifconfig eth0 Link encap:Ethernet HWaddr ae:11:14:22:0a:03 inet6 addr: fe80::ac11:14ff:fe22:a03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:85 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10496 (10.4 KB) TX bytes:13086 (13.0 KB) Interrupt:32 Base address:0x6000 eth1 Link encap:Ethernet HWaddr b2:2c:40:f2:a0:fa inet addr:192.168.69.167 Bcast:192.168.69.255 Mask:255.255.255.0 inet6 addr: fe80::b02c:40ff:fef2:a0fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13448 errors:0 dropped:0 overruns:0 frame:0 TX packets:3100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7679428 (7.6 MB) TX bytes:282286 (282.2 KB) Interrupt:36 Base address:0xa100 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:179 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:36905 (36.9 KB) TX bytes:36905 (36.9 KB) daniel@workwork:/var/lib/dhcp3$ cat dhclient.leases lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 07:36:53; rebind 5 2011/03/18 11:35:39; expire 5 2011/03/18 12:35:39; } lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 08:51:58; rebind 5 2011/03/18 12:24:16; expire 5 2011/03/18 13:24:16; } daniel@workwork:/var/lib/dhcp3$ cat dhclient.eth0.leases daniel@workwork:/var/lib/dhcp3$ ifconfig eth1 before and after dhclient http://img692.imageshack.us/i/prepost.png/

    Read the article

  • How to embed Arial in PDF when PDF has Helvetica?

    - by Brooks Moses
    So, I've got a PDF file that's generated by a program that uses the Base 14 fonts, so that it contains "Helvetica" and "Times Roman". When I look at that in my copy of Acrobat 7.0 on Windows (for example), it shows these with Arial and Times New Roman. I'm fine with that. The issue is that I'd like to publish this PDF file on lulu.com, and they want all fonts embedded. Including the Base 14. I don't have a copy of Helvetica, so what seems the natural thing to do is substitute Arial for Helvetica and embed Arial. How can I do that? I tried using the Print feature in Acrobat (note: this is the full version, not Reader) to print to a PDF file using Adobe's "Print to PDF" printer driver, and selected the "Embed All Fonts" option in the print settings. This worked for the fonts that I had actual copies of, but instead of "printing" Arial for Helvetica -- which it would do if printing to a real printer -- it leaves all the Helvetica as Helvetica and doesn't embed it. Any suggestions for alternate ways to do this? What I really want is just a copy of my PDF file with ALL fonts embedded, and I'm quite happy if doing that means making one of the usual substitutions for the "Helvetica" that's in it. I'd be happiest if I can do that within Acrobat or other software that I have (pdftex, maybe?), but I'm willing to install another free utility if I need to.

    Read the article

  • Add and remove letterhead in Word document

    - by Daniel Wolf
    Our company has letterheaded paper (pre-printed paper with our logo on it). Whenever we send something out by mail, we print it on that paper. However, when we send the same document via email, we convert it to a PDF file. Now the problem is: when converting a Word document to PDF, it should contain the letterhead. When printing the same document on paper, it should not (or else the letterhead would be printed twice). Currently, we are using two different Word document templates - one with letterhead, one without. So whenever we want to add or remove the letterhead, we have to create a new document with the other template and copy and paste everything over. Nasty solution. What I'm looking for is some simple way to switch the letterhead on and off. What I've tried so far: Switching the template: There does not seem to be a simple way to switch the template for an existing document. Using a picture watermark: Our letterhead goes all the way to the border of the page. (No printer supports this, of course, but it is fine for export to PDF.) Apparently depending on the current default printer, Word will not allow a borderless watermark, instead shifting the image around. Using the page header: When editing the page header, I can insert pictures at arbitrary positions, which is great. However, I could not find a way (short of macros) to enable/disable just the pictures in the header. (The text should remain there.)

    Read the article

  • Sharp mx2600 driver cannot see all the paper trays

    - by Frank R
    I am wondering if someone might have experienced this problem and have a solution. I have just taken over a network about a month ago so it is hard to know what truly worked and didn't work. However the end users reported that they used to be able to choose the tray they wanted to print from in the printer preferences in the driver for the Sharp MX2600n device then send the print job. Now they only have two trays to choose from instead of the four trays that exist. The only thing I have changed that might relate to this network device is the Admin password on the domain controller. I haven't made any changes to the Sharp device or the driver, until recently when I tired to update the driver for this device but that didn't fix anything. The domain controller is a Server 2008 VM running in Hyper-visor and it is pushing the shared printer out to the domain. I have looked at the web interface to manage the device and I can see all four paper trays in there, however if I try to see the number of trays from the driver interface, I can only see the top two paper trays and there should be four of them. This is the same with the admin account on the server or a workstation inside the domain, also a standard user account see's the same result. I have even tried updating the tray status within the driver to show more trays, but that doesn't help. I am hoping there is someone out there that has experienced this problem and knows a solution.

    Read the article

  • Possible to IPSec VPN Tunnel Public IP Addresses?

    - by caleban
    A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

    Read the article

  • Static route works on one computer, not the other

    - by Dan
    I have been struggling with this for a couple days now, maybe I just need some people with a fresh perspective to figure out what the issue is. Basically I have a bunch of computers that are being routed through a specific gateway in order to access a web page that is hosted internally on a separate subnet. I set up static routes on all of the computers, and they all work... except one. Here's what a route print -4 looks like for a working computer (Windows 7): =========================================================================== Interface List 14...xx xx xx xx xx xx ......Broadcom 802.11n Network Adapter 11...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 17...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.94 20 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.94 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.94 276 10.xxx.xxx.94 255.255.255.255 On-link 10.xxx.xxx.94 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.94 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.94 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.94 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== And here's a route print -4 from the station that doesn't work (also Windows 7): =========================================================================== Interface List 10...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.132 276 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.132 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.132 276 10.xxx.xxx.132 255.255.255.255 On-link 10.xxx.xxx.132 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.132 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.132 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.132 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== Both of these stations are running Windows 7. So essentially what I am trying to do here is route all traffic to the 10.zzz.zzz.0 subnet through the 10.xxx.xxx.147 gateway. Everything else should go through the 10.xxx.xxx.230 gateway. This is the intended behavior, and again it is working everywhere but that one station. I noticed that the Active Route metric costs differ between the two stations, but I am new to the routing table and I am not sure how that is impacting the behavior. I hope I have been able to explain the situation clearly. Any help would be much appreciated. I can provide any additional information if needed!

    Read the article

  • Is Cloud Print to blame for my inability to print?

    - by VarLogRant
    I have just moved to the Chrome beta (first 9.something and currently 10.0.648.127) on my Windows 7 64-bit machine, and my good web browsers (Firefox Beta and Chrome) can no longer print, and neither can Komodo Edit. The problem seems to have started when I tried to enable Google Cloud Print. Frustratingly, I can still print from IE 9 RC, and also from other machines in the office, which means the problem is entirely on this Windows machine. When I try to print from Chrome, first time I get the printer dialog, and once I click print, it waits, then pops up "Something went wrong", and each time after, it pops up with "No Printer Found". Under Firefox, I get "An unknown error occurred while printing", as does Komodo. I have printed from these applications before, and have even printed from Google Cloud Print. Once. But then it stopped. I really don't know where to go next in debugging this thing, and the Google results I see tend to be from 2007. I'm not ready for the paperless office yet, so please help!

    Read the article

  • Why *do* windows print queues occasionally choke on a print job

    - by Ian
    Y'know they way windows print queues will occasionally stop working with a print job at the head of the queue which just won't print and which you can't delete? Anyone know whats going on when this happens? I've been seeing this since the NT4 days and it still happens on 2008. I'm talking about standard IP connected laser printers - nothing fancy. I support a lot of servers and loads of workstations and see this happen a few times a year. The user will call saying they can't print. When you examine the print queue, which in my case will generally be a server based queue shared out to the workstations, you find a print job which you cannot cancel. You also can't pause it, reinitialize it, nothing. Stopping the spooler is the usual trick and works sometimes. However I occasionally see cases which even this doesn't cure and which a reboot is the only solution. Pause the queue, reboot, when it comes back up the job can then be deleted. Once gone the printer happily goes back to its normal state. No action is ever necessary on the printer. I regard having to reboot as last resort and don't like it. What on earth can be going on when stopping the process (spooler) and restarting it doesn't clear a problem? Its not linked to any manufacturer either. I've seen this on HPs, lexmark, canon, ricoh, on lasers, on plotters.... can't say I ever saw this on dot matrix. Anyone got any ideas as to what may be going on. Ian

    Read the article

  • How do I calculate the cost of printing a given page?

    - by Alenanno
    I have seen questions like How much does a square inch of ink cost and How much more will a high-dpi image cost to print?, but mine isn't asking neither about a specific case, nor about how much something costs, as that would depend on the toner, for example. Rather, I was wondering how should I go about calculating the cost of printing a given page. Note that "given page" should be seen as a sort of x, i.e. the answer should be applicable in any case; I'd like this question to provide a good reference for those who want to calculate this cost. What should be taken into consideration? The cost of a single page (the paper only) is easily checkable, since you divide the cost of the whole package for the number of pages in the package itself. But how do I calculate the cost of the ink/toner? Which could translate to: how do I calculate the Ink Density1 for a given printer? I know it depends on quality of the printer itself, the type, the quality of the image being printed, the very nature of what I'm going to print, etc. But again, the focus of my question is not on the variables of this case, but rather the constants, hoping the math simile works for this case too. 1: Total amount of ink in one area of the page.

    Read the article

  • vagrant fails to bring up additional adapter for centos vm using virtual box provider

    - by Anadi Misra
    this is in continuation of the question asked here about host only adapter on dhcp I upgraded to vagrant 1.6.3 and the updated Vagrantfile to following setting for multiple adapters # add additional adapter for inter machine networking dev.vm.network :private_network, :type => "dhcp", :adapter => "2", :netmask => "255.255.255.0" it goes through creating adapters but then fails bringing up the mic on vm Anadis-MacBook-Pro:full-stack-env anadi$ vagrant up Bringing machine 'full-stack-env' up with 'virtualbox' provider... ==> full-stack-env: Clearing any previously set forwarded ports... ==> full-stack-env: Clearing any previously set network interfaces... ==> full-stack-env: Preparing network interfaces based on configuration... full-stack-env: Adapter 1: nat full-stack-env: Adapter 2: hostonly ==> full-stack-env: Forwarding ports... full-stack-env: 22 => 4223 (adapter 1) full-stack-env: 8080 => 8090 (adapter 1) ==> full-stack-env: Running 'pre-boot' VM customizations... ==> full-stack-env: Booting VM... ==> full-stack-env: Waiting for machine to boot. This may take a few minutes... full-stack-env: SSH address: 127.0.0.1:4223 full-stack-env: SSH username: vagrant full-stack-env: SSH auth method: private key full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Remote connection disconnect. Retrying... ==> full-stack-env: Machine booted and ready! ==> full-stack-env: Checking for guest additions in VM... ==> full-stack-env: Setting hostname... ==> full-stack-env: Configuring and enabling network interfaces... The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! ARPCHECK=no /sbin/ifup eth 2> /dev/null Stdout from the command: Device eth does not seem to be present, delaying initialization. Stderr from the command: how ever when I log in to the environment I see two network interfaces as expected Anadis-MacBook-Pro:full-stack-env anadi$ vagrant ssh Last login: Wed Jun 4 12:54:47 2014 from 10.0.2.2 [vagrant@full-stack-env ~]$ ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:BD:39:57 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:3957/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:511 errors:0 dropped:0 overruns:0 frame:0 TX packets:360 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54574 (53.2 KiB) TX bytes:46675 (45.5 KiB) eth1 Link encap:Ethernet HWaddr 08:00:27:A3:86:C9 inet addr:172.28.128.3 Bcast:172.28.128.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:86c9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1360 (1.3 KiB) TX bytes:894 (894.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) I am bit confused here on why it is trying to add another mic (eth2)? In the VM I used for creating this vagrant box, I had added two NICs already.

    Read the article

  • How to use Public IP in case of two ISP when two differs from each other

    - by user1471995
    Please bare with my long explanation but this is important to explain the actual problem. Please also pardon my knowledge with PFsense as i am new to this. I have single PFSense box with 3 Ethernet adapter. Before moving to configuration for these, i want to let you know i have two Ethernet based Internet Leased Line Connectivity let's call them ISP A and ISP B. Then last inetrface is LAN which is connected to network switch. Typical network diagram ISP A ----- PFSense ----> Switch ---- > Servers ISP B ----- ISP A (Initially Purchased) WAN IP:- 113.193.X.X /29 Gateway IP :- 113.193.X.A and other 4 usable public IP in same subnet(So the gateway for those IP are also same). ISP B (Recently Purchased) WAN IP:- 115.115.X.X /30 Gateway IP :- 115.115.X.B and other 5 usable public IP in different subnet(So the gateway for those IP is different), for example if 115.119.X.X2 is one of the IP from that list then the gateway for this IP is 115.119.X.X1. Configuration for 3 Interfaces Interface : WAN Network Port : nfe0 Type : Static IP Address : 113.193.X.X /29 Gateway : 113.193.X.A Interface : LAN Network Port : vr0 Type : Static IP Address : 192.168.1.1 /24 Gateway : None Interface : RELWAN Network Port : rl0 Type : Static IP Address : 115.115.X.X /30 (I am not sure of the subnet) Gateway : 115.115.X.B To use Public IP from ISP A i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- WAN TCP/UDP * * 113.193.X.X1 53 (DNS) 192.168.1.5 53 (DNS) WAN TCP/UDP * * 113.193.X.X1 80 (HTTP) 192.168.1.5 80 (HTTP) WAN TCP * * 113.193.X.X2 80 (HTTP) 192.168.1.7 80 (HTTP) etc., c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the WAN those are only present. d) If this section in relevant then for Firewall: Rules at WAN tab then following default rule has been generated. * RFC 1918 networks * * * * * Block private networks * Reserved/not assigned by IANA * * * * * * To use Public IP from ISP B i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- RELWAN TCP/UDP * * 115.119.116.X.X1 80 (HTTP) 192.168.1.11 80 (HTTP) c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the RELWAN those are only present. d) If this section in relevant then for Firewall: Rules at RELWAN tab then following default rule has been generated. * RFC 1918 networks * * * * * * Reserved/not assigned by IANA * * * * * * Last thing before my actual query is to make you aware that to have multiple Wan setup i have done following steps a) Under System: Gateways at Groups Tab i have created new group as following MultipleGateway WANGW, RELWAN Tier 2,Tier 1 Multiple Gateway Test b) Then Under Firewall: Rules at LAN tab i have created a rule for internal traffic as follows * LAN net * * * MultipleGateway none c) This setup works if unplug first ISP traffic start routing using ISP 2 and vice-versa. Now my main query and problem is i am not able to use public IP address allocated by ISP B, i have tried many small tweaks but not successful in anyone. The notable difference between the two ISP is a) In case of ISP A there Public usable IP address are on same subnet so the gateway used for the WAN ip is same for the other public IP address. b) In case of ISP B there public usable IP address are on different subnet so the obvious the gateway IP for them is different from WAN gateway's IP. Please let me know how to use ISP B public usable IP address, in future also i am going to rely for more IPs from ISP B only.

    Read the article

  • can't connect 2 subnets through RRAS 2008 r2

    - by mcdwight6
    I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

    Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >