Search Results

Search found 3637 results on 146 pages for 'dhcp over vpn'.

Page 39/146 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Sonicwall SSL VPN: Unable to reconnect once connection drops

  - by Jeffrey Hantin

  One of my users is having problems with his NetExtender connection. After installing NetExtender from the portal, it connects fine -- ONCE. After that, attempting to reconnect gives Verifying user...authentication fail! and the log on the router shows: [timestamp] | Info | SSLVPN | Auth Failed: No user name in http request (message id: 1079) This seems odd to me because the user name, password and domain are entered on the NetExtender client. After this error occurs, the only way to connect again is to uninstall, reboot, and reinstall NetExtender. He can connect fine to the Sonicwall SSLVPN demo site, and a different user can connect fine to this site from a different PC. Any clues?

  Read the article

• Error 720 on VPN (PPTP) attempt

  - by Andy Shulman

  When I attempt to connect to a server running XP x64 (so essentially Server 2003) using a PPTP connection, it fails with client-side error Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this configuration. and server-side error Event ID: 20050 The user WINSERV3\Andy connected to port VPN8-1 has been disconnected because no network protocols were successfully negotiated. I have configured the router to pass both TCP packets on 1723 and GRE packets. I have used Wireshark (filtering out ARP, UDP, and all TCP ports other than 1723) to observe the packets received by the server. Wireshark does not explicitly name any protocol GRE, but it does tell me the server sent and received TCP, PPTP, PPP LCP, PPP CHAP, PPP CBCP, and PPP IPCP. The connection seems to go wrong at packet 30, where the protocol is PPP LCP, with the payload of the packet being labeled "Protocol Reject". Obviously, this is going from server to client. This would seem to lead to the conclusion that there is something wrong with my client, which runs Windows 7 Ultimate x64. However, it is able to connect to my house's router, which runs the DD-WRT firmware and is thus a PPTP endpoint. I'm thoroughly at a loss. Please help!

  Read the article

• How to detect VPN disconnection with vpnc?

  - by Abhinav

  What is the easiest way to detect that a vpnc connection on Linux/Ubuntu has disconnected? Manually, I think the way to detect is to check whether the interface (tun0) appears in /sbin/ifconfig output. Is there a better way to find out immediately, so that a script can be run to restart the connection?

  Read the article

• proxy/vpn by dns entry

  - by rcourtna

  I've been using a service by unblock-us.com, which provides a proxy to Canadians/others allowing access to services that are locked down to only US ip addresses. This is easy enough to achieve by setting up a reverse proxy (eg: squid) on a US-hosted server, and then configuring your browser or OS to use that proxy. However, there is something that unblock-us does that I'm not sure how to duplicate. Rather than configuring your OS to use them as a proxy, you can simply change the DNS Server settings on your router to point to their addresses. Any requests to services they support are automatically proxied. The advantage to this is that you don't have to set up every computer in your house, and it "just works" with clients like ps3, xbox, android, etc. Disadvantage is you really don't have control over what gets proxied, as well as there are privacy concerns I suppose. How can I achieve this same functionality on my own us-based slice?

  Read the article

• Connecting Small business network to Azure Site to Site VPN

  - by MarkKGreenway

  Would like to have connectivity between azure virtual machines and on LAN users. My current network has a Cisco ISA550 connected to the WAN (one Ethernet cable into the office the fiber transceiver is on a different floor)and any public servers can be one-to one NAT-ed to have a public and private IP. What is the best way to get a reliable connection. Between end users and the cloud? I want to know the preferred on site endpoint. Do the azure vm's have to have a local ip in the LAN subnet? (Right now 10.10.0.0/20 or 255.255.240.0 to give room if this is the case). If in purchased an asa550 would I put it behind or in front of the isa550. Would it be ahead or peer with the users switches? What is the best way to get a reliable connection. Between end users and the cloud servers?

  Read the article

• Cant logon to domain over site-to-site vpn

  - by 3molo

  Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

  Read the article

• PFSense VPN Routing

  - by SvrGuy

  We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

  Read the article

• Windows 2012 VPN setup without Active Directory

  - by iss42

  I have followed the guide here: http://www.youtube.com/watch?v=9qbpxKRb-94 But my situation differs with respect to there being no AD (Active Directory) setup. When I try to connect I get this in the server event log: "The user xx connected from x.x.x.x but failed an authentication attempt due to the following reason: The account does not have permission to dial in." Is there a way to enable this without AD?

  Read the article

• VPN: What should my Gateway remote ID be?

  - by Lynn Owens

  I have a Netgear ProSafe UTM. I set the Gateway local ID to it's WAN IP. But I'm not sure what to put for it's Remote ID. I want to be able to connect to it from a laptop across the internet. I can chose between: Remote IP FQDN Client FQDN Cert DN Frankly I've tried them messing around with them all but I'm just shooting in the dark, and the help desk docs are worthless. Also, Googling around seems to end up with lots of pages not really related to what I want. A lot of pages on configuring Cisco or Windows home networking or privacy advocates.

  Read the article

• VPN within a VM to allow for internet access on the host

  - by David Durrant

  I have a network connection (created under Networks and Sharing) that I use to connect to a customer's site. But when I use this to connect to the site, I loose all access to the public internet, and can only access customer specific items. I want to circumvent this issue by creating a VM and then utilizing the VM to connect to the network location and interact within the customer's domain, while leaving my host machine open to the internet. I'm not extremely familiar with networking, but I have a few basic skills. Please let me know if this is possible and what the correct procedures are. I already have a VM created with VirtualBox, and both the host and guest are running Windows 7 x64. I have created duplicate VPNs already, but can only connect successfully on the host machine.

  Read the article

• CentOS 5 VPN Server won't work

  - by Miro Markarian

  I have a CentOS 5 server configured to be both a L2TP server and a PPTP server + a radius server for hosting the AAA. My problem is that, the L2TP works great and I can connect to it, but can't connect to PPTP and every-time it ends up with error #619 when it gets to the verifying username and password section. Here is the log I got from /var/log/messages Dec 17 07:40:02 serverdl pptpd[8570]: CTRL: Client 5.52.247.62 control connection started Dec 17 07:40:03 serverdl pptpd[8570]: CTRL: Starting call (launching pppd, opening GRE) Dec 17 07:40:03 serverdl pppd[8571]: Plugin radius.so loaded. Dec 17 07:40:03 serverdl pppd[8571]: RADIUS plugin initialized. Dec 17 07:40:03 serverdl pppd[8571]: Plugin radattr.so loaded. Dec 17 07:40:03 serverdl pppd[8571]: RADATTR plugin initialized. Dec 17 07:40:03 serverdl pppd[8571]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 17 07:40:03 serverdl pppd[8571]: pptpd-logwtmp: $Version$ Dec 17 07:40:03 serverdl pppd[8571]: pppd 2.4.4 started by root, uid 0 Dec 17 07:40:03 serverdl pppd[8571]: Using interface ppp0 Dec 17 07:40:03 serverdl pppd[8571]: Connect: ppp0 <--> /dev/pts/2 Dec 17 07:40:03 serverdl pptpd[8570]: GRE: read(fd=7,buffer=80515e0,len=8260) from network failed: status = -1 error = Protocol not available Dec 17 07:40:03 serverdl pptpd[8570]: CTRL: GRE read or PTY write failed (gre,pty)=(7,6) Dec 17 07:40:03 serverdl pppd[8571]: Modem hangup Dec 17 07:40:03 serverdl pppd[8571]: Connection terminated. Dec 17 07:40:03 serverdl pppd[8571]: Exit. Dec 17 07:40:03 serverdl pptpd[8570]: CTRL: Client 5.52.247.62 control connection finished Just yesterday when I hadn't set up the L2TP yet PPTP was working great but then I uninstalled it and removed all it's config from /etc/* and installed L2TP first and then installed PPTP after it. and then it stopped to work. I believe it must be a radiusclient issue because both of the PPTP and L2TP services use radius to authenticate. And another thing I think must be the issue is that when assigning IPs to the PPP interfaces, I have done the following config. Is that right? For L2TP: localip 10.10.10.1 remoteip 10.10.10.2-254 For PPTP: localip 10.10.9.1 remoteip 10.10.9.2-254

  Read the article

• TheGreenBow VPN with Cisco 2811 config

  - by Fujishiro

  Okay. Im using the feared x64 Win7 retail. I tried soooo many clients/methods, but none of them worked. Finally after a long battle, I made TGB working. YAY! I only have problems with the configuration. What data I've got? group auth user+pw;3DES enc(saw it from the router cfg);user+password. And that's all. I tried using the TGB provided manual and the howtos on their site, but there is no instruction for the given model, and the other cisco type conf wont work.) I tried to configure it up, but its not that easy.. as I mentioned aldy. If anyone uses this app or knows how to configure it up... please..help me.

  Read the article

• setting up bridged adapter for VPN server

  - by B. VB.

  I have an Ubuntu linux Linode server that I am trying to install OpenVPN on. I'm following the tutorials (which, it turns out, are quite incomplete). auto br0 iface br0 inet static address 192.168.0.10 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off When I add this chunk in my /etc/network/interfaces, and I restart networking, my eth0 interface does not have an IP and I cannot get on the network (I need to use a buggy, slow, and annoying AJAX term to do damage repair). Why does adding this screw everything up? Any tips on how to set up this bridged adapter?? Thanks in advance!

  Read the article

• Mesh Networked servers via vpn

  - by microspino

  I got a design idea and I would like to have some advice from SF about It. I have 5 customers with small real-estate databases. I've built for them a desktop app and now they would like to merge their database to share their data. I don't want to centralize everything in one place nor I want to do maintenance for servers. They told me also, that all of them in their offices, have little servers and maintenance guys available. Although everything seems suitable for web application, I had the idea to experiment something new: Any customer small-server wild be connected to the others in a sort of mesh network without a single point of failure and through VPNs. If one of the servers went down the customers could still connect to their databases from one of the other mesh networked servers instead of from the local one that is down. During normal operations all the servers sync the db with the others through VPNs. I can accept a half-day timing window of NON synched data, in other words, since I don't need real time synchronization, the server don't have to always stay in synch. I can migrate my data over to other Non-Sql technologies like CouchDB or Redis or whatever you suggest. As you can see I don't have a lot of constraints and although I could go with a web application I would like to delegate and decentralize support, data-privacy and management, as more as I can to my customers offices. Is that a crazy idea? Do you know If something similar exist? Which technology would you suggest?

  Read the article

• Connecting via ShrewSoft VPN client means no LAN internet access (Windows 7 64 bit) - any advice please?

  - by iwishiknewmoreaboutnetworking

  I have a Windows 7 64 bit desktop machine which is connected to a LAN. I recently installed ShrewSoft VPN client v 2.1.7 on my machine so that I can connect to a license server hosted by my customer. They are running a Cisco VPN server and I originally tried (unsuccessfully!) to use the Cisco VPN client for Windows 64 bit but the default gateway wasn't being configured correctly after loading in my pcf file. Using ShrewSoft I am able to import the same pcf file, and successfully connect to the machine I need to using the VPN client software. The client machine I need to connect to has IP address 1.52.90.33. The problem is that when I am connected to the customer network using the VPN client application (and after a few minutes) I lose my LAN internet connection. I can only presume that this is because, by default the ShrewSoft VPN client application automatically tunnels all traffic through the VPN connection. I know there is an option to switch off the "Tunnel All" option on the Policy tab of the application and enter a Remote Network Resource (to "Include" or "Exclude") as "Address" and "Netmask" IP addresses however I am not sure what I need to enter here. Here is my ipconfig output before connecting to the VPN (with suffixes blanked out): Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : ***.*** Link-local IPv6 Address . . . . . : fe80::8de3:9dbe:393a:33ba%11 IPv4 Address. . . . . . . . . . . : 150.237.13.17 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 150.237.13.1 Tunnel adapter 6TO4 Adapter: Connection-specific DNS Suffix . : ***.*** IPv6 Address. . . . . . . . . . . : 2002:96ed:d11::96ed:d11 Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301 Tunnel adapter Local Area Connection* 9: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:2cf9:38c4:6912:f2ee Link-local IPv6 Address . . . . . : fe80::2cf9:38c4:6912:f2ee%12 Default Gateway . . . . . . . . . : Tunnel adapter isatap.***.***: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : ***.*** Here is my route print output before connecting to the VPN: =========================================================================== Interface List 11...20 cf 30 9d ec 2a ......Realtek RTL8168D/8111D Family PCI-E Gigabit Ethern et NIC (NDIS 6.20) 1...........................Software Loopback Interface 1 14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 12...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 150.237.13.1 150.237.13.17 2 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 150.237.13.0 255.255.255.0 On-link 150.237.13.17 257 150.237.13.17 255.255.255.255 On-link 150.237.13.17 257 150.237.13.255 255.255.255.255 On-link 150.237.13.17 257 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 150.237.13.17 257 255.255.255.255 255.255.255.255 On-link 12

  Read the article

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• Windows 2003 - RAS service - VPN client can only connect to server, not internal network

  - by Gk

  Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/ Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The problem is when a client connect to server, client can connect to server(10.10.0.10), but cannot connect to another host locate in internal network (10.10.0.11) even cannot ping to 10.10.0.50. RAS configured with IP routing enabled, client connect with options: Use default gateway on remote network. I'm messed up and can not figure out what wrong. Please help me T_T. TIA, giobuon

  Read the article

• iPad revocable vpn access

  - by carpat

  I'm a programmer at my organization, but somehow got drafted into looking into some server stuff so forgive me of my ignorance: They want to give our sales people secure access to our internal sites using their iPads. This must be secure (obviously) but also revocable from the company's side (if someone quits they can no longer access our network). I see from http://support.apple.com/kb/HT1288 that the iPad supports "RSA SecurID", "CRYPTOCard", and "Kerberos" authentication methods. Will one of these do what we need? Are there any major differences between them?

  Read the article

• Any consumer routers with Outgoing VPN support?

  - by Brian Lacy

  When I'm working at home, I need to be able to connect to three different outgoing VPNs, two of which happen to use the same internal IP addressing schemes (192.168.0.*). I also need a static address for my VirtualBox VM so I can connect to my testing web server. Are there any routers which will allow me to connect to multiple outgoing VPNs and assign different internal IP addresses through NAT? Is such a thing even possible, or are there alternate solutions available? Thanks!

  Read the article

• Setting up a VPN tunnel between a Linux box and a Cisco FW

  - by Meni

  Hi. I have a linux box (ubuntu) and I have a service provider that will only allow an IPSEC tunnel connection between his network and my linux box. I have these details from the service provider: Service Provider: Peer IP – Lan on service provider's side - 10.10.10.10/24 Linux box details: Peer IP - Lan - Connection details: Phase1: Sha Aes 128 DH - group x Preshared – Lifetime – 24h Phase2: Sha Aes 128 Lifetime – 1h I am not sure which app I need to install on the linux box that will support this type of connection. Any ideas? Thanks!

  Read the article

• PFSence VPN Routing

  - by SvrGuy

  We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

  Read the article

• Masquerade traffic from certain source IP to VPN connection

  - by Shuo Ran

  Network Setup: 10.0.0.1 Router: to internet 10.0.0.70 Server: Ubuntu based server,default gateway is 10.0.0.1 10.0.0.51 PC I created a PPTP connection(interface: ppp0) on Server to a machine on the internet, what I want to do is route all the traffic from certain IP address(10.0.0.51) through the PPTP connection and then to the internet. What I did are: Set the gateway on PC(10.0.0.51) as 10.0.0.70 Enabled ipv4 forward on 10,0,0,70 Add the masquerade rule to iptable: iptables -t nat -A POSTROUTING -o ppp0 -s 10.0.0.51 -j MASQUERADE After that, it seems none of the traffic from 10.0.0.51 be redirected to ppp0, instead these traffic are still going through 10.0.0.1 directly. Any thoughts on it?

  Read the article

• Is it possible to set a VPN through Tor? and have functionality for Software Updates?

  - by moazhmi

  Gday, I have been trying to do a software update on Trusty both on terminal and software update app but that hasnt been successful, apparently my ISP has a broken transparent proxy. moazhmi@moazhmi-K52F:~$ wget -S http://extras.ubuntu.com/ubuntu/dists/trusty/InRelease --2014-06-04 17:34:52-- http://extras.ubuntu.com/ubuntu/dists/trusty/InRelease Resolving extras.ubuntu.com (extras.ubuntu.com)... 91.189.92.152 Connecting to extras.ubuntu.com (extras.ubuntu.com)|91.189.92.152|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 200 OK Content-Type: text/html; charset=UTF-8 Content-Length: 213 Date: Wed, 04 Jun 2014 14:34:52 GMT Server: Apache/2.2.22 (Ubuntu) Connection: Keep-Alive Vary: Accept-Encoding Length: 213 [text/html] Saving to: ‘InRelease’ 100%[======================================>] 213 --.-K/s in 0s 2014-06-04 17:34:52 (22.1 MB/s) - ‘InRelease’ saved [213/213] I was advised to refer back to the ISP with a complaint but that has returned with peanuts. My Question is - Is it possible to set a VPN through TOR , i.e whereas I can run software updates through terminals or the app . the browsing is out of question here as I need to update which I am not able to do / only on 12.04.

  Read the article

• How to setup DNS server behind a VPN

  - by Brian

  I want to host some websites behind a VPN and I need some help with the finer points of the configuration. Thus far I've settled on OpenVPN + Bind9 and I want to configure the domains like this: External DNS mail.example.com www.example.com vpn.example.com I want to be able to connect to the vpn using 'vpn.example.com'. Once connected I then want to be able to resolve anything which is '*.vpn.example.com' with the DNS server sitting behind the VPN. I know that OpenVPN can push DNS servers to clients when they connect. I am having trouble though with the DNS config, both internal and external. I've gone through a few tutorials etc. and tried to reason about it myself but I'm not getting anywhere. So my main question would be does the above configuration make sense? If so, any general pointers or examples would be greatly appreciated. Here's what I've tried so far based on this tutorial (I've redacted my domain with example.com). When I try the tests with dig at the end to check the resolution is working it fails. db.vpn.example.com $TTL 15m vpn.example.com. IN SOA ns.vpn.example.com. [email protected]. ( 2009010910 ;serial 900 ;refresh 900 ;retry 900 ;expire 900 ;minimum TTL ) vpn.example.com. IN NS ns.vpn.example.com. ns IN A 192.168.0.2 test IN A 192.168.0.2

  Read the article

• Multiple Routers, Failover, DHCP and multiple gateways. NOT WAN-failover

  - by u_b

  I've had a look around google and this forum but could not find an answer to my question. So probably one of you can help me a little. My intended setup is: Router R1: wan connection to isp. connected backup server. provides some wireless SSID. other connected devices like printer, laptop, etc. both wired and wireless. Router R2: no wan connection to isp but connected to R2. connects mp3-streamer and music server. also serves as a wireless access point with same SSID. other than described connections only wireless connections. I would like to be able to control music even if R1 is off, e.g. with no internet connection. On the other hand I would like to access internet also in the case that R2 is off, i.e. no music access. Last but not least I would like to stream internet radio, i.e., R1 and R2 are on, and music is streamed from internet to R1 to R2 to streamer. I would like to realize all this using DHCP (also using static assignments) so i do not have to configure statically on android, laptop, etc. So my questions are: Can I make DHCP provide a list of two default gateways R1,R2? In order to make clients fallback to other gateway if currently assigned gateway is turned off? Thanks in advance, u_b

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >