openoffice org - Page 424

Emacs - nxhtml-mode - memory full

- by mbutz

working with nxhtml-mode in emacs, I get problems since a few weeks. While working emacs pauses unexpectingly until showing a message in the mode line "!MEM FULL!"; obviously nxhtml-mode is filling up the memory until emacs stopps to work. I am working with html, php and css files. I have no idea how I could debug this problem in a meaningfull way. Also I seem to be the only one to have this problem, because googling did not deliver any answers to this question. I am using emacs 2.32 on an Linux Mint 11 system. I can not find out the verson of nxhtml, it says revision 829 downloaded from http://bazaar.launchpad.net/~nxhtml/nxhtml/main/revision/829. I set up a test scenario with a minimal dot-emacs just to test the nxhtml-mode. It seemed to be alright, but it does not reflect my productive set up. It would probably take a week or so to gradually include everything I used to use within emacs (e.g. org-mode) while testing whether nxhtml-mode does not like anything, which is called in my dot-emacs file. Is there another way? Can I find out, what causes the memory overload? Does anyone has similar problems using nxhtml-mode? Greetings Martin

Read the article

Projecting an object into a scene based on world coordinates only

- by user354862

I want to place a 3D image into a scene base on world/global coordinates. I have an image of a scene. The image was captures at some global coordinate (x1, y1, z1). I am given an object that needs to be placed into this scene based on its global coordinate (x2, y2, y3). This object needs to be projected into the scene accurately similarly to perspective projection. An example may help to make this clear. Imagine there is a parking lot with some set of global coordinates. A picture is taken of a portion of the parking lot. The coordinates from the spot where the image was taken is recorded. The goal is to place a virtual vehicle into this image using the global coordinates for that vehicle. Because the global cooridnates for the vehicle may not be in the fov of the global coordinates for the image I am assuming that I will need the image coordinates, angle and possibly fov. 3D graphics is not my area so I have been looking at http://en.wikipedia.org/wiki/Perspective_projection#Perspective_projection. I have also been looking at Matrix3DProjection which seems to possibly be what I am looking for but it only works in Silverlight and I am trying to do this in WPF. In my mind it appears I need to determine the (X,Y,Z) coordinates that are in the fov of the image, determine the world coordinate to pixel conversion and then accurately project the vehicle into the image giving it the correct perspective such that is looks 3D i.e smaller the further away bigger closer Is there a function within WPF that can help with this or will I need to re-learn matrices and do this by hand?

Read the article

Can you write files in Chrome 8?

- by greggory.hz

I'm wondering if, with the new File API exposed in Chrome (I'm not concerned with cross-browser support at this time), it would be possible to write back to files opened via a file input. You can see an example of what I'm trying to accomplish here: http://www.grehz.com/ide. I know I can use server side scripts to dynamically create the files and allow the user to download them normally. I'm hoping that there's a way to accomplish this purely client side. I had read somewhere that you can write to files opened via a file input. I haven't been able to find any examples of this, though I have seen passing references to a FileWriter class. I would be completely not surprised if this wasn't possible though (it seems likely that there are security issues with this). Just looking for some guidance or resources. UPDATE: I was reading here: http://dev.w3.org/2009/dap/file-system/file-writer.html As I was playing around in Chrome, it looks like FileSaver and FileWriter are not implemented, but BlobBuilder is. I can call getBlob() on the BB object, is there any way I can then save that without FileSave or FileWriter?

Read the article

How to use JOIN using Hibernate's session.createSQLQuery()

- by javauser71

Hi All, I have two Entity (tables) - Employee & Project. An Employee can have multiple Projects. Project table's CREATOR_ID field refers to Employee table's ID field. Employee entity maintains a list of Project. Using EntityManager following query works fine - "entityManager.createQuery("select e from EmployeeDTO e, ProjectDTO p where p.id = ?1 and p.creator.id=e.id"); But since I have the LAZY association relationship, I get error: "Could not initialize proxy - no Session" if I try to access Project info from Employee entity. This is expected and so I am using Hibernate's Session to create query as shown below. Session session = HibernateUtil.getSessionFactory().openSession(); org.hibernate.Query q = session.createSQLQuery("SELECT E FROM EMPLOYEE_TAB E, PROJECT_TAB P WHERE P.ID = " + projectId + " AND P.CREATOR_ID = E.ID") .addEntity("EmployeeDTO ", EmployeeDTO.class) .addEntity("ProjectDTO", ProjectDTO.class); But I get error like: "Column 'E' is either not in any table in the FROM list or appears within a join specification and is outside the scope of the join specification..." Can anyone suggest what will be the right JOIN syntax for such case? If I use ("SELECT * FROM EMPLOYEE_TAB E, ........") - it gives other error: "java.lang.ClassCastException: [Ljava.lang.Object; cannot be cast to com.im.server.dto.EmployeeDTO". Thanks in advance.

Read the article

LocationMatch Regex for versioning

- by Aventus

I've tried using the docs but I'm quite new to regex. I've had success with others but the same method is not working for what I'm actually after. I'm trying to send users to different servers based on the version number in the URL. This this case, older versions are to be sent to the new server for a particular service. <LocationMatch "/(1.0|2.0|3.0)/appname"> ... </LocationMatch> The following is working - <LocationMatch "/1/appname"> ... </LocationMatch> <LocationMatch "/2/appname"> ... </LocationMatch> What I would love to achieve is sending all those major releases with a single tag - <LocationMatch "/(1*|2*|3*)/appname"> ... </LocationMatch> I've already referred the documentation at http://httpd.apache.org/docs/2.2/mod/core.html#locationmatch but unfortunately it doesn't cover my case with enough detail to help me.

Read the article

Tulsa SharePoint Interest Group - How SharePoint 2010 Business Connectivity Services could change yo

- by dmccollough

Bio: Corey Roth is a consultant at Stonebridge specializing in SharePoint solutions in the Oil & Gas Industry. He has ten plus years of experience delivering solutions in the energy, travel, advertising and consumer electronics verticals. Corey has always focused on rapid adoption of new Microsoft technologies including Visual Studio 2010, SharePoint 2010, .NET Framework 4.0, LINQ, and SilverLight. He also contributed greatly to the beta phases of Visual Studio 2005. For his contributions, he was awarded the Microsoft Award for Customer Excellence (ACE). Corey is a graduate of Oklahoma State University. Corey is a member of the .NET Mafia (www.dotnetmafia.com) where he blogs about the latest technology and SharePoint. Abstract: How SharePoint 2010 Business Connectivity Services could change your life - The New BDC How many hours have your wasted building simple ASP.NET applications to do nothing more than simple CRUD operations against a database. Many tools have made this easier, but now it's so easy, you'll be up and running in minutes. This session will show you hot easy it is to get started integrating external data from your line of business systems in SharePoint 2010. You will learn how to register an external content type using SharePoint Designer based upon a database table or web service and then build an external list. With external lists, you will see how you can perform CRUD operations on your line of business directly from SharePoint without ever having to do manual configuration in XML files. Finally, we will walk through how to create custom edit forms for your list using InfoPath 2010. Agenda: 6pm - 6:30 Pizza and Mingle - Sponsored by TekSystems 6:30 - 6:45 Announcements 6:45 - 7:45 Presentation! 7:45 - 8:00 Drawings and Door Prizes Location: TCC (Tulsa Community College) Northeast Campus 3727 East Apache Tulsa, OK 74115 918-594-8000 Campus Map | Live | Yahoo | Google | MapQuest Door Prizes: We will be giving away one of each of these: XBox 360 - Halo 3 ODST Telerik Premium Collection ($1300.00 value) ReSharper ($199.00 value) SQLSets ($149.00 value) 64 bit Windows 7 Introducing Windows 7 for Developers Developing Service-Oriented AJAX Applications on the Microsoft Platform Sponsors: Thanks to our sponsors: TekSystems - Thanks for purchasing the Pizza for our meetings. ISOCentric - Thanks for providing us hosting for the groups web site. Tulsa Community College - Thanks for providing us a place to have our meetings. NEVRON - Thanks for providing us prizes to give away. INETA.org - For allowing us to be a Charter Member and providing awesome Speakers! PERPETUUM Software - Thanks for providing us prizes to give away. Telerik - Thanks for providing us prizes to give away. GrapeCity - Thanks for providing us prizes to give away. SQLSets - Thanks for providing us prizes to give away. K2 - Thanks for providing us prizes to give away. Microsoft - For providing us with a lot of support and product giveaways! Orielly books - For providing us with books and discounts. Wrox books - For providing us with books and discounts. Have any special requests? Let us know at this link: http://tinyurl.com/lg5o38. RSVP for this month's meeting by responding to this thread: http://tinyurl.com/yafkzel . (Must be logged in to the site) Be SURE to RSVP no later than Noon on April 12th and you will get an extra entry for the prize drawings! So, do it now, before you forget and miss out! Show up for the first time or bring a new buddy and you both get TWO extra entries!

Read the article

Configuring Fed Authentication Methods in OIF / IdP

- by Damien Carru

In this article, I will provide examples on how to configure OIF/IdP to map OAM Authentication Schemes to Federation Authentication Methods, based on the concepts introduced in my previous entry. I will show examples for the three protocols supported by OIF: SAML 2.0 SSO SAML 1.1 SSO OpenID 2.0 Enjoy the reading! Configuration As I mentioned in my previous article, mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. WLST Commands The two OIF WLST commands that can be used to define mapping Federation Authentication Methods to OAM Authentication Schemes are: addSPPartnerProfileAuthnMethod() to define a mapping on an SP Partner Profile, taking as parameters: The name of the SP Partner Profile The Federation Authentication Method The OAM Authentication Scheme name addSPPartnerAuthnMethod() to define a mapping on an SP Partner , taking as parameters: The name of the SP Partner The Federation Authentication Method The OAM Authentication Scheme name Note: I will discuss in a subsequent article the other parameters of those commands. In the next sections, I will show examples on how to use those methods: For SAML 2.0, I will configure the SP Partner Profile, that will apply all the mappings to SP Partners referencing this profile, unless they override mapping definition For SAML 1.1, I will configure the SP Partner. For OpenID 2.0, I will configure the SP/RP Partner SAML 2.0 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 2.0 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use BasicScheme as the Authentication Scheme Map BasicSessionScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:Password Federation Authentication Method Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> BasicScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to BasicScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "BasicScheme") Exit the WLST environment:exit() The user will now be challenged via HTTP Basic Authentication defined in the BasicScheme for AcmeSP. Also, as noted earlier, the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via HTTP Basic Authentication, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping BasicScheme To change the Federation Authentication Method mapping for the BasicScheme to urn:oasis:names:tc:SAML:2.0:ac:classes:Password instead of urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport for the saml20-sp-partner-profile SAML 2.0 SP Partner Profile (the profile to which my AcmeSP Partner is bound to), I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:Password", "BasicScheme") Exit the WLST environment:exit() After authentication via HTTP Basic Authentication, OIF/IdP would now issue an Assertion similar to (see that the AuthnContextClassRef was changed from PasswordProtectedTransport to Password): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:Password </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to OAMLDAPPluginAuthnScheme instead of BasicScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will now be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme and BasicScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods. As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthnContextClassRef set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> OAMLDAPPluginAuthnScheme </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To add the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapping, I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to PasswordProtectedTransport): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> SAML 1.1 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 1.1 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:1.0:am:password to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner to OAMLDAPPluginAuthnScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for the SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods (in the SP Partner Profile). As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="OAMLDAPPluginAuthnScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To map the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password for this SP Partner only, I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> LDAPScheme as Authentication Scheme I will now show that by defining a Federation Authentication Mapping at the Partner level, this now ignores all mappings defined at the SP Partner Profile level. For this test, I will switch the default Authentication Scheme for this SP Partner back to LDAPScheme, and the Assertion issued by OIF/IdP will not be able to map this LDAPScheme to a Federation Authentication Method anymore, since A Federation Authentication Method mapping is defined at the SP Partner level and thus the mappings defined at the SP Partner Profile are ignored The LDAPScheme is not listed in the mapping at the Partner level I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for this SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to LDAPScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="LDAPScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping LDAPScheme at Partner Level To fix this issue, we will need to add the LDAPScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password mapping for this SP Partner only. I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OpenID 2.0 In the OpenID 2.0 flows, the RP must request use of PAPE, in order for OIF/IdP/OP to include PAPE information. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. The WLST command will take a list of policies, delimited by the ',' character, instead of SAML 2.0 or SAML 1.1 where a single Federation Authentication Method had to be specified. Test Setup In this setup, OIF is acting as an IdP/OP and is integrated with a remote OpenID 2.0 SP/RP partner identified by AcmeRP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods (the second one is a custom for this use case) LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. No Federation Authentication Method is defined OOTB for OpenID 2.0, so if the IdP/OP issue an SSO response with a PAPE Response element, it will specify the scheme name instead of Federation Authentication Methods After authentication via FORM, OIF/IdP would issue an SSO Response similar to: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=LDAPScheme&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D Mapping LDAPScheme To map the LDAP Scheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods, I will execute the addSPPartnerAuthnMethod() method (the policies will be comma separated): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeRP", "http://schemas.openid.net/pape/policies/2007/06/phishing-resistant,http://openid-policies/password-protected", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to the two policies): https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant+http%3A%2F%2Fopenid-policies%2Fpassword-protected&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will cover how OIF/IdP can be configured so that an SP can request a specific Federation Authentication Method to challenge the user during Federation SSO.Cheers,Damien Carru

Read the article

GPGPU

WhatGPU obviously stands for Graphics Processing Unit (the silicon powering the display you are using to read this blog post). The extra GP in front of that stands for General Purpose computing.So, altogether GPGPU refers to computing we can perform on GPU for purposes beyond just drawing on the screen. In effect, we can use a GPGPU a bit like we already use a CPU: to perform some calculation (that doesn’t have to have any visual element to it). The attraction is that a GPGPU can be orders of magnitude faster than a CPU.WhyWhen I was at the SuperComputing conference in Portland last November, GPGPUs were all the rage. A quick online search reveals many articles introducing the GPGPU topic. I'll just share 3 here: pcper (ignoring all pages except the first, it is a good consumer perspective), gizmodo (nice take using mostly layman terms) and vizworld (answering the question on "what's the big deal").The GPGPU programming paradigm (from a high level) is simple: in your CPU program you define functions (aka kernels) that take some input, can perform the costly operation and return the output. The kernels are the things that execute on the GPGPU leveraging its power (and hence execute faster than what they could on the CPU) while the host CPU program waits for the results or asynchronously performs other tasks.However, GPGPUs have different characteristics to CPUs which means they are suitable only for certain classes of problem (i.e. data parallel algorithms) and not for others (e.g. algorithms with branching or recursion or other complex flow control). You also pay a high cost for transferring the input data from the CPU to the GPU (and vice versa the results back to the CPU), so the computation itself has to be long enough to justify the overhead transfer costs. If your problem space fits the criteria then you probably want to check out this technology.HowSo where can you get a graphics card to start playing with all this? At the time of writing, the two main vendors ATI (owned by AMD) and NVIDIA are the obvious players in this industry. You can read about GPGPU on this AMD page and also on this NVIDIA page. NVIDIA's website also has a free chapter on the topic from the "GPU Gems" book: A Toolkit for Computation on GPUs.If you followed the links above, then you've already come across some of the choices of programming models that are available today. Essentially, AMD is offering their ATI Stream technology accessible via a language they call Brook+; NVIDIA offers their CUDA platform which is accessible from CUDA C. Choosing either of those locks you into the GPU vendor and hence your code cannot run on systems with cards from the other vendor (e.g. imagine if your CPU code would run on Intel chips but not AMD chips). Having said that, both vendors plan to support a new emerging standard called OpenCL, which theoretically means your kernels can execute on any GPU that supports it. To learn more about all of these there is a website: gpgpu.org. The caveat about that site is that (currently) it completely ignores the Microsoft approach, which I touch on next.On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the DirectX API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels that run on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as a "kernel". For a comprehensive collection of links about this (including tutorials, videos and samples) please see my blog post: DirectCompute.Note that there are many efforts to build even higher level languages on top of DirectX that aim to expose GPGPU programming to a wider audience by making it as easy as today's mainstream programming models. I'll mention here just two of those efforts: Accelerator from MSR and Brahma by Ananth. Comments about this post welcome at the original blog.

Read the article

Ubuntu 12.04 patched b43 driver compilation error

- by Zed

I tried this How do I install this patched b43 driver? guide to install patched b43 driver on Ubuntu 12.04 with 3.2.0-31-generic kernel but I can't pass compilation phase.Here is what I did: wget http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.1/compat-wireless-3.1.1-1.tar.bz2 cd compat-wireless-3.1.1-1/ scripts/driver-select b43 make make -C /lib/modules/3.2.0-31-generic/build M=/home/marco/compat-wireless-3.1.1-1 modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-31-generic' CC [M] /home/marco/compat-wireless-3.1.1-1/compat/main.o In file included from /home/marco/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5:0, from /home/marco/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24, from <command-line>:0: include/linux/netdevice.h:1153:5: warning: "IS_ENABLED" is not defined [-Wundef] include/linux/netdevice.h:1153:15: error: missing binary operator before token "(" include/linux/netdevice.h: In function ‘netdev_uses_dsa_tags’: include/linux/netdevice.h:1421:9: error: ‘struct net_device’ has no member named ‘dsa_ptr’ include/linux/netdevice.h:1422:31: error: ‘struct net_device’ has no member named ‘dsa_ptr’ include/linux/netdevice.h: In function ‘netdev_uses_trailer_tags’: include/linux/netdevice.h:1431:9: error: ‘struct net_device’ has no member named ‘dsa_ptr’ include/linux/netdevice.h:1432:35: error: ‘struct net_device’ has no member named ‘dsa_ptr’ make[3]: *** [/home/marco/compat-wireless-3.1.1-1/compat/main.o] Error 1 make[2]: *** [/home/marco/compat-wireless-3.1.1-1/compat] Error 2 make[1]: *** [_module_/home/marco/compat-wireless-3.1.1-1] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-31-generic' make: *** [modules] Error 2 To fix that error I added #include <linux/kconfig.h> to /usr/src/linux-headers-3.2.0-31-generic/include/linux/netdevice.h but now I'm getting something else make make -C /lib/modules/3.2.0-31-generic/build M=/home/marco/compat-wireless-3.1.1-1 modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-31-generic' CC [M] /home/marco/compat-wireless-3.1.1-1/compat/main.o LD [M] /home/marco/compat-wireless-3.1.1-1/compat/compat.o CC [M] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.o In file included from /home/marco/compat-wireless-3.1.1-1/include/linux/bcma/bcma.h:9:0, from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/bcma_private.h:8, from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:8: /home/marco/compat-wireless-3.1.1-1/include/linux/ssb/ssb.h: In function ‘ssb_driver_register’: /home/marco/compat-wireless-3.1.1-1/include/linux/ssb/ssb.h:236:36: error: ‘THIS_MODULE’ undeclared (first use in this function) /home/marco/compat-wireless-3.1.1-1/include/linux/ssb/ssb.h:236:36: note: each undeclared identifier is reported only once for each function it appears in In file included from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/bcma_private.h:8:0, from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:8: /home/marco/compat-wireless-3.1.1-1/include/linux/bcma/bcma.h: In function ‘bcma_driver_register’: /home/marco/compat-wireless-3.1.1-1/include/linux/bcma/bcma.h:170:37: error: ‘THIS_MODULE’ undeclared (first use in this function) /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c: At top level: /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:12:20: error: expected declaration specifiers or ‘...’ before string constant /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:13:16: error: expected declaration specifiers or ‘...’ before string constant /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:182:1: warning: data definition has no type or storage class [enabled by default] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:182:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’ [-Wimplicit-int] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:182:1: warning: parameter names (without types) in function declaration [enabled by default] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:188:1: warning: data definition has no type or storage class [enabled by default] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:188:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’ [-Wimplicit-int] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:188:1: warning: parameter names (without types) in function declaration [enabled by default] make[3]: *** [/home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.o] Error 1 make[2]: *** [/home/marco/compat-wireless-3.1.1-1/drivers/bcma] Error 2 make[1]: *** [_module_/home/marco/compat-wireless-3.1.1-1] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-31-generic' make: *** [modules] Error 2 Any suggestion what to try next?

Read the article

OBIEE 11.1.1 - Introduction to OBIEE 11g Full Sample App

- by user809526

Isn't it nice to discover OBIEE 11g around a nice "How To" catalog of features? to observe OBI and Essbase relationships at work? to discover TimesTen? The OBIEE 11g Full Sample App (FSA) is a comprehensive collection of examples designed to demonstrate the latest Oracle BIEE 11g capabilities and design best practices: Enhanced visualizations as Geo-spacial maps and interactive dashboards, Action Framework, BI Publisher, Scorecard and Strategy Management, Mobile style sheets, Semantic layer modeling, Multi-source federation, Integration with products such as Essbase, Oracle OLAP, ODM, TimesTen, ODI and more The FSA is intended to be comprehensive, it is big (see CAVEAT below). The FSA is not an Oracle product, it is a good will free deployment of OBIEE/Essbase designed to exemplify OBIEE features, infrastructure and security around the Fusion Middleware components. Its contents and code are distributed free for demonstrative purposes only. It is neither maintained nor supported by Oracle as a licensed product. The OBIEE Full Sample App is independent of the default Sample App that comes with the OBIEE product. BENEFITS The FSA helps as a demonstrator of OBIEE 11g best practices, a tutorial, an environment "Test & Scrap", a SR bench (regression, conflicts), a tuning bench, a quick ready made POC seed for projects, a security options environment, ... The FSA - Is organized around a catalog of functional features - Has been deployed over 1000 times, it should be stable RELEASE The Full Sample App (V107) is bound to OBIEE 11.1.1.5 and Essbase 11.1.2.1 (November 2011). The FSA release dates are independent of the Product GA date (OBIEE). In early December 2011, a new functional Patch (V110) is released. It is easily applied (in less than 15 mins) on top of OBIEE SampleApp 11.1.1.5 (V107). The patch (V110) includes additional functional examples: 1. Web Catalog Statistics Application: Provides detailed insight into your web catalog content, dormant catalog objects, webcat impact analysis for metadata changes and more 2. Data inflation Scripts: A set of simple SQL procedures to quickly inflate SampleApp Fact and Dimension data to millions of records in a few minutes 3. Public Content Extensions Framework: A patching framework for public examples and contributions leveraging SampleApp 4. Additional report examples (including bridge report, external chart integrations) and bug fixes DISTRIBUTION as VBox image (November 2011) The ready made VBox image is designed to run on Virtual Box. It can be converted to VMware (see another BLOG). 1/ http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html VBox Image Deployment Guide Sampleapp_v107_GA.ovf - VBox image key file The above http URL provides the user:password for the ftp URLs below. 2/ ftp://user:[email protected]/static/SampleAppV107/ 12 "7-zip" files Sampleapp_v107_GA_7_20.7z.001 -> .012 We recommend 7-zip file manager for unzipping (http://www.7-zip.org/). Select Unzip here option, it will create the contents under a directory named "SampleApp_10722". On Windows, it is important to download and save zip file under the root directory (e.g. C:\ or D:\) because of possible long pathnames. 3/ ftp://user:[email protected]/static/SampleAppV107/Unzipped_Version/ 4 files Sampleapp_v107_GA-disk[1234].vmdk Important note: Check the provided checksums (md5sum). Please do it! DISTRIBUTION as Installation files for existing OBI 11.1.1.5 (November 2011) http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html Install files Deployment Guide SampleApp_10722_1.zip - 198 MB CAVEAT Many computers have RAM chips problems that keep often silent ... until you manipulate big files. It is strongly advised you run some memory check program eg MEMTEST in GRUB boot manager. Running md5sum repeatedly onto the very same big file must be consistent [same result], else a hardware memory problem is suspected. For Virtual Box, you should most likely enable VT-X (Vanderpool) hardware virtualization in BIOS. A free disk space of 80 GB is required to perform safely the VBox image installation. A Virtual Machine of minimum 6 to 7 GB memory fits the needs of combining OBIEE and Essbase execution.

Read the article

Clean Code: A Handbook of Agile Software Craftsmanship – book review

- by DigiMortal

Writing code that is easy read and test is not something that is easy to achieve. Unfortunately there are still way too much programming students who write awful spaghetti after graduating. But there is one really good book that helps you raise your code to new level – your code will be also communication tool for you and your fellow programmers. “Clean Code: A Handbook of Agile Software Craftsmanship” by Robert C. Martin is excellent book that helps you start writing the easily readable code. Of course, you are the one who has to learn and practice but using this book you have very good guide that keeps you going to right direction. You can start writing better code while you read this book and you can do it right in your current projects – you don’t have to create new guestbook or some other simple application to start practicing. Take the project you are working on and start making it better! My special thanks to Robert C. Martin I want to say my special thanks to Robert C. Martin for this book. There are many books that teach you different stuff and usually you have markable learning curve to go before you start getting results. There are many books that show you the direction to go and then leave you alone figuring out how to achieve all that stuff you just read about. Clean Code gives you a lot more – the mental tools to use so you can go your way to clean code being sure you will be soon there. I am reading books as much as I have time for it. Clean Code is top-level book for developers who have to write working code. Before anything else take Clean Code and read it. You will never regret your decision. I promise. Fragment of editorial review “Even bad code can function. But if code isn’t clean, it can bring a development organization to its knees. Every year, countless hours and significant resources are lost because of poorly written code. But it doesn’t have to be that way. What kind of work will you be doing? You’ll be reading code—lots of code. And you will be challenged to think about what’s right about that code, and what’s wrong with it. More importantly, you will be challenged to reassess your professional values and your commitment to your craft. Readers will come away from this book understanding How to tell the difference between good and bad code How to write good code and how to transform bad code into good code How to create good names, good functions, good objects, and good classes How to format code for maximum readability How to implement complete error handling without obscuring code logic How to unit test and practice test-driven development This book is a must for any developer, software engineer, project manager, team lead, or systems analyst with an interest in producing better code.” Table of contents Clean code Meaningful names Functions Comments Formatting Objects and data structures Error handling Boundaries Unit tests Classes Systems Emergence Concurrency Successive refinement JUnit internals Refactoring SerialDate Smells and heuristics A Concurrency II org.jfree.date.SerialDate Cross references of heuristics Epilogue Index

Read the article

SOA Suite 11g Asynchronous Testing with soapUI

- by Greg Mally

Overview The Enterprise Manager test harness that comes bundled with SOA Suite 11g is a great tool for doing smoke tests and some minor load testing. When a more robust testing tool is needed, often times soapUI is leveraged for many reasons ranging from ease of use to cost effective. However, when you want to start doing some more complex testing other than synchronous web services with static content, then the free version of soapUI becomes a bit more challenging. In this blog I will show you how to test asynchronous web services with soapUI free edition. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/ Asynchronous Web Service Testing in soapUI When invoking an asynchronous web service, the caller must provide a callback for the response. Since our testing will originate from soapUI, then it is only natural that soapUI would provide the callback mechanism. This mechanism in soapUI is called a MockService. In a nutshell, a soapUI MockService is a simulation of a Web Service (aka, a process listening on a port). We will go through the steps in setting up the MockService for a simple asynchronous BPEL process. After creating your soapUI project based on an asynchronous BPEL process, you will see something like the following: Notice that soapUI created an interface for both the request and the response (i.e., callback). The interface that was created for the callback will be used to create the MockService. Right-click on the callback interface and select the Generate MockService menu item: You will be presented with the Generate MockService dialogue where we will tweak the Path and possibly the port (depends upon what ports are available on the machine where soapUI will be running). We will adjust the Path to include the operation name (append /processResponse in this example) and the port of 8088 is fine: Once the MockService is created, you should have something like the following in soapUI: This window acts as a console/view into the callback process. When the play button is pressed (green triangle in the upper left-hand corner), soapUI will start a process running on the configured Port that will accept web service invocations on the configured Path: At this point we are “almost” ready to try out the asynchronous test. But first we must provide the web service addressing (WS-A) configuration on the request message. We will edit the message for the request interface that was generated when the project was created (SimpleAsyncBPELProcessBinding > process > Request 1 in this example). At the bottom of the request message editor you will find the WS-A configuration by left-clicking on the WS-A label: Here we will setup WS-A by changing the default values to: Must understand: TRUE Add default wsa:Action: Add default wsa:Action (checked) Reply to: ${host where soapUI is running}:${MockService Port}${MockService Path} … in this example: http://192.168.1.181:8088/mockSimpleAsyncBPELProcessCallbackBinding/processResponse We now are ready to run the asynchronous test from soapUI free edition. Make sure that the MockService you created is running and then push the play button for the request (green triangle in the upper left-hand corner of the request editor). If everything is configured correctly, you should see the response show up in the MockService window: To view the response message/payload, just double-click on a response message in the Message Log window of the MockService: At this point you can now expand the project to include a Test Suite for some load balance tests etc. This same topic has been covered in various detail on other sites/blogs, but I wanted to simplify and detail how this is done in the context of SOA Suite 11g. It also serves as a nice introduction to another blog of mine: SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition.

Read the article

Oracle WebCenter - Well Connected

- by Brian Dirking

800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} An good post from Dan Elam on the state of the ECM industry (http://www.aiim.org/community/blogs/community/ECM-Vendors-go-to-War) . For those of you who don’t know Dan, he is one of the major forces in the content management industry. He founded eVisory and IMERGE Consulting, he is an AIIM Fellow and a former US Technical Expert to the International Standards Organization (ISO), and has been a driving force behind EmTag, AIIM’s Emerging Technologies Group. His post is interesting – it starts out talking about our Moveoff Documentum campaign, but then it becomes a much deeper insight into the ECM industry. Dan points out that Oracle has been making quiet strides in the ECM industry. In fact, analysts share this view Oracle, pointing out Oracle is growing greater than 20% annually while many of the big vendors are shrinking. And as Dan points out, this cements Oracle as one of the big five in the ECM space – the same week that Autonomy was removed from the Gartner Magic Quadrant for ECM. One of the key things points out is that Oracle WebCenter is well connected. WebCenter has out-of-the-box connections to key enterprise applications such as E-Business Suite, PeopleSoft, Siebel and JD Edwards. Those out-of-the-box integrations make it easy for organizations to drive content right into the places where it is needed, in the midst of business processes. At the same time, WebCenter provides composite interface capabilities to bring together two or more of these enterprise applications onto the same screen. Combine that with the capabilities of Oracle Social Network, you start to see how Oracle is providing a full platform for user engagement. But beyond those connections, WebCenter can also connect to other content management systems. It can index and search those systems from a single point of search, bringing back results in a single combined hitlist. WebCenter can also extend records management capabilities into Documentum, SharePoint, and email archiving systems. From a single console, records managers can define a series, set a retention schedule, and place holds – without having to go to each system to make these updates. Dan points out that there are some new competitive dynamics – to be sure. And it is interesting when a system can interact with another system, enforce dispositions and holds, and enable users to search and retrieve content. Oracle WebCenter is providing the infrastructure to build on, and the interfaces to drive user engagement. It’s an interesting time.

Read the article

Free SQL Server training? Now you’re talking.

- by Fatherjack

SQL Server user groups are everywhere, literally all over the globe there are SQL Server professionals meeting on a regular basis, sharing ideas, solving problems, learning about how to do new stuff and new ways to do old stuff and it’s all for free. I don’t have detailed figures but of all the SQL Server professionals there are only a small number of them attend these user groups. Those people are the people that are taking the time and making then effort to make themselves better at their chosen trade, more employable and having a good time. For free. I don’t know why but there are many people that don’t seem to want to be the best they can be. Some of you enlightened people that do already attend could be doing more though. Have you ever spoken at your group? Not just in the break while you have a mouthful of pizza and a drink in your hand but had the attention of the whole group listen to you speak. It doesn’t need to be a full hour, it doesn’t need to be some obscure deeply technical demonstration of SQL Server internals, just a few minutes on something that you do that might help other people with their daily work. A neat process that helps you get from Problem A to Solution B. There is no need to get concerned that becoming a speaker means that you suddenly have to know more than anyone else in the room. This is you talking about something that you experienced. What you did, what you would repeat, what you might do differently next time. No one in the audience can pick you up on a technicality. If someone comes out with a great idea that you hadn’t thought of, say “That’s a great idea, I didn’t think of that while we had the problem on our hands. I’ll try to remember that for next time”. If someone is looking to show you up for picking the wrong decision (and this, in my experience, is very uncommon indeed) then you simply give a reply like “Well, at the time we chose that option. Perhaps another time then we would tackle things differently but we were happy with how our solution worked”. It’s sharing things like this that makes user groups have a real value, talking about how you coped with or averted a disaster, a handy little section of code or using a tool in a particular way that you take for granted that might, just might, be something that other people haven’t thought of that solves a problem or saves some time for them. At the next meeting you might get the same benefit from a different person and so it goes on. As individuals benefits so the community benefits. For free. Things I encourage you to do; If you are a chapter or user group leader; encourage someone from your group who has never spoken before to start speaking. If you are a chapter or user group attendee that hasn’t spoken before; speak for at least 5 minutes on something related to SQL Server at any group meeting. If you don’t currently attend a user group; please go along to you nearest one when they are meeting next and invest in yourself and your future. UK user group details are here: http://sqlsouthwest.co.uk/national_ug.htm , PASS chapters outside the UK are found via http://www.sqlpass.org/PASSChapters/LocalChapters.aspx. If you are unsure of how you might achieve any of these things then get in touch with me*, I’ll give you specific advice on getting started on any of the above points and help you prove to yourself what you are capable of. SQL Community – be part of it and make it better. Let me know how you get on in the comments.

Read the article

SharePoint OCR image files indexing

Introduction This article describes how to setup indexing of the image files (including TIFF, PDF, JPEG, BMP...) using OCR technology. The indexing described below utilizes Microsoft IFilter technology and as such is not specific to SharePoint, but can be used with any product that uses Microsoft indexing: Microsoft Search, Desktop search, SQL Server search, and through the plug-ins with Google desktop search. I however use it with Microsoft Windows SharePoint Services 2003. For those other products, the registration may need to be slightly different. Background One of the projects I was working on required a storage of old documents scanned into PDF files. Then there was a separate team of people responsible for providing a tags for a search engine so those image documents could be found. The whole process was clumsy, labor intensive, and error prone. That was what started me on my exploration path. OCR The first search I fired was for the Open Source OCR products. Pretty quickly, I narrowed it down to TESSERACT (http://code.google.com/p/tesseract-ocr/). Tesseract is an orphaned brain child of HP that worked on it from 1985 to 1995. Then it was moved to the Open Source, and now if I understand it correctly, Google is working on it. With credentials like that, it's no wonder that Tesseract scores one of the highest marks on OCR recognition and accuracy. After downloading and struggling just a bit, I got Tesseract to work. The struggling part was that the home page claims that its base input format is a TIFF file. May be my TIFFs were bad, but I was able to get it to work only for BMP files. Image files conversion So now that I have an OCR that can convert BMP files into text, how do I get text out of the image PDF files? One more search, and I settled down on ImageMagic (http://www.imagemagick.org/). This is another wonderful Open Source utility that can convert any file into image. It did work out of the box, converting any TIFF files into bitmaps, but to get PDF files converted, it requires a GhostScript (http://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs864/gs864w32.exe). Dealing with text PDFs With that utility installed, I was cooking - I can convert any file (in particular PDF and TIFF) into bitmap, and then I can extract the text out of the bitmap. The only consideration was to somehow treat PDF files containing text differently - after all, OCR is very computation intensive and somewhat error prone even with perfect image quality and resolution. So another quick search, and I have a PDFTOTEXT (ftp://ftp.foolabs.com/pub/xpdf/xpdf-3.02pl4-win32.zip) - thank God for Open Source! With these guys, I can pull text out of PDF in an eye blink. However, I would get nothing for pure image PDFs, but I already have a solution for that! Batch process It took another 15 minutes to setup a batch script to automate the process: Check the file extension If file is a PDF file try to extract text out of it if there is more than certain amount of text in the file - done! if there is no text, convert first page into bitmap run OCR on the bitmap For any other file type, convert file into bitmap Run OCR on the bitmap Once you unzip the attached project, check out the bin\OCR.BAT file. It will create a temporary file in the directory where your source file is with the same name + the '.txt' extension.Continue span.fullpost {display:none;}

Read the article

Install GIMP 2.7.1 on Lucid Lynx using PPA

- by Vivek

GIMP lovers are going to be disappointed to hear that GIMP is going away in the next release of much awaited Ubuntu 10.04. Today we take a look at installing in on Lucid Lynx using PPA. The reason for getting rid of it as cited by the GIMP developers, is that GIMP is too professional a software to be included in regular desktop version of Ubuntu. And it takes up too much of space on the disk. Also, the fact that it’s too complicated for regular users. If you can’t live without it…let’s see how to install GIMP 2.7.1 on Lucid Lynx (Currently in Alpha). The new version of GIMP supports single window mode and we will also see how to enable this feature as well. First we need to add the official GIMP 2.7.1 PPA in the software sources of Ubuntu 10.04, by opening the terminal window and typing the following command: sudo sh -c “echo ‘deb http://ppa.launchpad.net/matthaeus123/mrw-gimp-svn/ubuntu lucid main’ >> /etc/apt/sources.list” Now that we have added the PPA we need to add the GPG key, so type the following in your Terminal window. sudo apt-key adv –recv-keys –keyserver keyserver.ubuntu.com 405A15CB Next up we have to update the software repository… sudo apt-get update All that is left is to install GIMP 2.7.1 by typing in the following… sudo apt-get install gimp Click ‘Y’ (for yes) to install GIMP Once GIMP is installed you can start it by going to Applications > Graphics > GNU Image Manipulation Program. You now have your favorite GIMP on your favorite Ubuntu 10.04. As you can see in the image below, GIMP still comes with default 3 windows, which could clog up your lower panel In Ubuntu 10.04. However, now you can run GIMP in single window mode by going to Windows > Single-Window mode. That’s all! Now you have your GIMP running in single window mode with less of hassle to manage 3 windows. It’s unfortunate that GIMP will not be included, but by following these instructions, you’ll be able to enjoy using it in Ubuntu 10.04. Similar Articles Productive Geek Tips Show the List of Installed Packages on Ubuntu or DebianHow to Install Windows Applications on Linux Using CrossoverInstall VMware Tools on Ubuntu Edgy EftInstall Adobe PDF Reader on Ubuntu EdgyInstall MySQL Server 4.1 on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements

Read the article

Download YouTube Videos the Easy Way

- by Trevor Bekolay

You can’t be online all the time, and despite the majority of YouTube videos being nut-shots and Lady Gaga parodies, there is a lot of great content that you might want to download and watch offline. There are some programs and browser extensions to do this, but we’ve found that the easiest and quickest method is a bookmarklet that was originally posted on the Google Operating System blog (it’s since been removed). It will let you download standard quality and high-definition movies as MP4 files. Also, because it’s a bookmarklet, it will work on any modern web browser, and on any operating system! Installing the bookmarket is easy – just drag and drop the Get YouTube video link below to the bookmarks bar of your browser of choice. If you’ve hidden the bookmark bar, in most browsers you can right-click on the link and save it to your bookmarks. Get YouTube video With the bookmarklet available in your browser, go to the YouTube video that you’d like to download. Click on the Get YouTube video link in your bookmarks bar, or in the bookmarks menu, wherever you saved it earlier. You will notice some new links appear below the description of the video. If you download the standard definition file, it will save as “video.mp4” by default. However, if you download the high definition file, it will save with the same name as the title of the video. There are many methods of downloading YouTube videos…but we think this is the easiest and quickest method. You don’t have to install anything or use up resources, but you can still get a link to download an MP4 with one click. Do you use a different method to download Youtube videos? Let us know about it in the comments! javascript:(function(){if(document.getElementById(’download-youtube-video’))return;var args=null,video_title=null,video_id=null,video_hash=null;var download_code=new Array();var fmt_labels={‘18′:’standard%20MP4′,’22′:’HD%20720p’,'37′:’HD%201080p’};try{args=yt.getConfig(’SWF_ARGS’);video_title=yt.getConfig(’VIDEO_TITLE’)}catch(e){}if(args){var fmt_url_map=unescape(args['fmt_url_map']);if(fmt_url_map==”)return;video_id=args['video_id'];video_hash=args['t'];video_title=video_title.replace(/[%22\'\?\\\/\:\*%3C%3E]/g,”);var fmt=new Array();var formats=fmt_url_map.split(’,');var format;for(var i=0;i%3Cformats.length;i++){var format_elems=formats[i].split(’|');fmt[format_elems[0]]=unescape(format_elems[1])}for(format in fmt_labels){if(fmt[format]!=null){download_code.push(’%3Ca%20href=\”+(fmt[format]+’&title=’+video_title)+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}elseif(format==’18′){download_code.push(’%3Ca%20href=\’http://www.youtube.com/get_video?fmt=18&video_id=’+video_id+’&t=’+video_hash+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}}}if(video_id==null||video_hash==null)return;var div_embed=document.getElementById(’watch-embed-div’);if(div_embed){var div_download=document.createElement(’div’);div_download.innerHTML=’%3Cbr%20/%3E%3Cspan%20id=\’download-youtube-video\’%3EDownload:%20′+download_code.join(’%20|%20′)+’%3C/span%3E’;div_embed.appendChild(div_download)}})() Similar Articles Productive Geek Tips Watch YouTube Videos in Cinema Style in FirefoxDownload YouTube Videos with Cheetah YouTube DownloaderStop YouTube Videos from Automatically Playing in FirefoxImprove YouTube Video Viewing in Google ChromeConvert YouTube Videos to MP3 with YouTube Downloader TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

Read the article

Wipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way

- by The Geek

Giving a computer to somebody else? Maybe you’re putting it out on Craigslist to sell to a stranger—either way, you’ll want to make sure that your drive is completely wiped, scrubbed, and clean of any personal data. Here’s the easy way to do it. If you only have access to an Ubuntu Live CD or thumb drive, you can actually use that instead if you prefer, and we’ve got you covered with a full guide to securely wiping your PC’s hard drive. Otherwise, keep reading. Wipe the Drive with DBAN Darik’s Boot and Nuke CD is the easiest way to permanently and totally destroy every bit of personal information on that drive—nobody is going to recover a thing once this is done. The first thing you’ll need to do is download a copy of the ISO image, and then burn it to a blank CD with something really useful like Imgburn. Just choose Burn image to Disc at the start screen, select the little file icon, grab the downloaded ISO, and then go. If you need a little more help, we’ve got you covered with a beginner’s guide to burning an ISO image. Once you’re done, stick the disc into the drive, start the PC up, and then once you boot to the DBAN prompt you’ll see a menu. You can pretty much ignore everything on here, and just type… autonuke And there you are, your disk is now being securely wiped. Once it’s all done, you can remove the CD, and then either pack the PC up to sell, or re-install Windows on there if you feel like it. More Advanced Method If you’re really paranoid, want to run a different type of wipe, or just like fiddling with the options, you can choose F3 or hit Enter at the prompt to head to the advanced selection screen. Here you can choose exactly which drive to wipe, or hit the M key to change the method. You’ll be able to choose between a bunch of different wipe options. The Quick Erase is all you really need though. So there you are, easy PC wiping in one package. What about you? Do you make sure to wipe your old PCs before giving them away? Personally I’ve always just yanked out the hard drives before I got rid of an old PC, but that’s just me. Download DBAN from dban.org Similar Articles Productive Geek Tips Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveHow to Dispose of Old Computers ResponsiblyHow To Delete a VHD in Windows 7Speed up External USB Hard Drives in Windows VistaSpeed Up SATA Hard Drives in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

Read the article

I spy a Live Framework portal

- by jamiet

Those that have followed my blogs for a while may know that I have a slightly banal interest in Windows Live and, more specifically, the Live Services developer platform'; if that doesn’t sound interesting to you then stop reading now. My interest mainly stems from the Live Mesh technology that was announced a couple of years ago and the data synchronisation platform API that underpins it; that platform is called the Live Framework or LiveFX for short. At the Professional Developer’s Conference (PDC) 2008 Microsoft made LiveFX available to the public as a Tech Preview and I spent some time learning to use it and also built a few test apps on it too. In August 2009 an announcement came that that tech preview was getting shut down: "At the Professional Developer Conference 2008, we gave the developer community access to the technical preview of the Live Framework. The Live Framework is core to our vision of providing you with a consistent programming interface. Now we are working to integrate existing services, controls and the Live Framework into the next release of Windows Live. Your feedback continues to help us build the best possible offerings for Windows Live users, for you and for your customers. " Since then news on LiveFX has disappeared save for a throwaway session at PDC09 and I was hoping that news was going to appear at this week’s MIX conference but nothing was forthcoming. Instead though today I stumbled upon an unannounced portal for future LiveFX applications on Microsoft’s Azure portal at http://live.azure.com. Check it out: I consider this to be very good news. This Azure portal was built after the LiveFX tech preview was decommissioned so seeing Live Services existing so prominently alongside Microsoft’s other cloud efforts like Windows Azure and SQL Azure vindicates my early investment in the platform and gives me hope that we’re going to see something get released very very soon. I believe that the potential uses for this platform are extremely compelling and I’m looking forward to trying some out in the near future. I am also expecting LiveFX to have a heavy dependency on the OData protocol that I talked about yesterday in my post OData.org updated - gives clues about future sql azure enhancements so you can tell where my interest in that stems from. In case you’re wondering the projects that you see listed above (Basic List Sample, JT-proj etc…) are projects that I built on the old Tech Preview platform so clearly that stuff has not gone for good which is also good news; not just because it means I’ll have access to the code I wrote before but I also assume it means that LiveFX won’t have changed much since its tech preview incarnation. I know there are other LiveFX buffs out there and hopefully this news reaches some of them. If you are one of them the please put a comment below and let me know your thoughts! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Creating dynamic breadcrumb in asp.net mvc with mvcsitemap provider

- by Jalpesh P. Vadgama

I have done lots breadcrumb kind of things in normal asp.net web forms I was looking for same for asp.net mvc. After searching on internet I have found one great nuget package for mvpsite map provider which can be easily implemented via site map provider. So let’s check how its works. I have create a new MVC 3 web application called breadcrumb and now I am adding a reference of site map provider via nuget package like following. You can find more information about MVC sitemap provider on following URL. https://github.com/maartenba/MvcSiteMapProvid So once you add site map provider. You will find a Mvc.SiteMap file like following. And following is content of that file. <?xml version="1.0" encoding="utf-8" ?> <mvcSiteMap xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://mvcsitemap.codeplex.com/schemas/MvcSiteMap-File-3.0" xsi:schemaLocation="http://mvcsitemap.codeplex.com/schemas/MvcSiteMap-File-3.0 MvcSiteMapSchema.xsd" enableLocalization="true"> <mvcSiteMapNode title="Home" controller="Home" action="Index"> <mvcSiteMapNode title="About" controller="Home" action="About"/> </mvcSiteMapNode> </mvcSiteMap> So now we have added site map so now its time to make breadcrumb dynamic. So as we all know that with in the standard asp.net mvc template we have action link by default for Home and About like following. <div id="menucontainer"> <ul id="menu"> <li>@Html.ActionLink("Home", "Index", "Home")</li> <li>@Html.ActionLink("About", "About", "Home")</li> </ul> </div> Now I want to replace that with our sitemap provider and make it dynamic so I have added the following code. <div id="menucontainer"> @Html.MvcSiteMap().Menu(true) </div> That’s it. This is the magic code @Html.MvcSiteMap will dynamically create breadcrumb for you. Now let’s run this in browser. You can see that it has created breadcrumb dynamically without writing any action link code. So here you can see with MvcSiteMap provider we don’t have to write any code we just need to add menu syntax and rest it will do automatically. That’s it. Hope you liked it. Stay tuned for more till then happy programming.

Read the article

New January 2013 Release of the Ajax Control Toolkit

- by Stephen.Walther

I am super excited to announce the January 2013 release of the Ajax Control Toolkit! I have one word to describe this release and that word is “Charts” – we’ve added lots of great new chart controls to the Ajax Control Toolkit. You can download the new release directly from http://AjaxControlToolkit.CodePlex.com – or, just fire the following command from the Visual Studio Library Package Manager Console Window (NuGet): Install-Package AjaxControlToolkit You also can view the new chart controls by visiting the “live” Ajax Control Toolkit Sample Site. 5 New Ajax Control Toolkit Chart Controls The Ajax Control Toolkit contains five new chart controls: the AreaChart, BarChart, BubbleChart, LineChart, and PieChart controls. Here is a sample of each of the controls: AreaChart: BarChart: BubbleChart: LineChart: PieChart: We realize that people love to customize the appearance of their charts so all of the chart controls include properties such as color properties. The chart controls render the chart on the browser using SVG. The chart controls are compatible with any browser which supports SVG including Internet Explorer 9 and new and recent versions of Google Chrome, Mozilla Firefox, and Apple Safari. (If you attempt to display a chart on a browser which does not support SVG then you won’t get an error – you just won’t get anything). Updates to the HTML Sanitizer If you are using the HtmlEditorExtender on a public-facing website then it is really important that you enable the HTML Sanitizer to prevent Cross-Site Scripting (XSS) attacks. The HtmlEditorExtender uses the HTML Sanitizer by default. The HTML Sanitizer strips out any suspicious content (like JavaScript code and CSS expressions) from the HTML submitted with the HtmlEditorExtender. We followed the recommendations of OWASP and ha.ckers.org to identify suspicious content. We updated the HTML Sanitizer with this release to protect against new types of XSS attacks. The HTML Sanitizer now has over 220 unit tests. The Ajax Control Toolkit team would like to thank Gil Cohen who helped us identify and block additional XSS attacks. Change in Ajax Control Toolkit Version Format We ran out of numbers. The Ajax Control Toolkit was first released way back in 2006. In previous releases, the version of the Ajax Control Toolkit followed the format: Release Year + Date. So, the previous release was 60919 where 6 represented the 6th release year and 0919 represent September 19. Unfortunately, the AssembyVersion attribute uses a UInt16 data type which has a maximum size of 65,534. The number 70123 is bigger than 65,534 so we had to change our version format with this release. Fortunately, the AssemblyVersion attribute actually accepts four UInt16 numbers so we used another one. This release of the Ajax Control Toolkit is officially version 7.0123. This new version format should work for another 65,000 years. And yes, I realize that 7.0123 is less than 60,919, but we ran out of numbers. Summary I hope that you find the chart controls included with this latest release of the Ajax Control Toolkit useful. Let me know if you use them in applications that you build. And, let me know if you run into any issues using the new chart controls. Next month, back to improving the File Upload control – more exciting stuff.

Read the article

Microsoft ReportViewer SetParameters continuous refresh issue

- by Ilya Verbitskiy

Originally posted on: http://geekswithblogs.net/ilich/archive/2013/10/16/microsoft-reportviewer-setparameters-continuous-refresh-issue.aspxI am a big fun of using ASP.NET MVC for building web-applications. It allows us to create simple, robust and testable solutions. However, .NET world is not perfect. There is tons of code written in ASP.NET web-forms. You cannot simply ignore it, even if you want to. Sometimes ASP.NET web-forms controls bring us non-obvious issues. The good example is Microsoft ReportViewer control. I have an example for you. 1: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %> 2: <%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %> 3: 4: <!DOCTYPE html> 5: 6: <html xmlns="http://www.w3.org/1999/xhtml"> 7: <head runat="server"> 8: <title>Report Viewer Continiuse Resfresh Issue Example</title> 9: </head> 10: <body> 11: <form id="form1" runat="server"> 12: <div> 13: <asp:ScriptManager runat="server"></asp:ScriptManager> 14: <rsweb:ReportViewer ID="_reportViewer" runat="server" Width="100%" Height="100%"></rsweb:ReportViewer> 15: </div> 16: </form> 17: </body> 18: </html> The back-end code is simple as well. I want to show a report with some parameters to a user. 1: protected void Page_Load(object sender, EventArgs e) 2: { 3: _reportViewer.ProcessingMode = ProcessingMode.Remote; 4: _reportViewer.ShowParameterPrompts = false; 5: 6: var serverReport = _reportViewer.ServerReport; 7: serverReport.ReportServerUrl = new Uri("http://localhost/ReportServer_SQLEXPRESS"); 8: serverReport.ReportPath = "/Reports/TestReport"; 9: 10: var reportParameter1 = new ReportParameter("Parameter1"); 11: reportParameter1.Values.Add("Hello World!"); 12: 13: var reportParameter2 = new ReportParameter("Parameter2"); 14: reportParameter2.Values.Add("10/16/2013"); 15: 16: var reportParameter3 = new ReportParameter("Parameter3"); 17: reportParameter3.Values.Add("10"); 18: 19: serverReport.SetParameters(new[] { reportParameter1, reportParameter2, reportParameter3 }); 20: } I set ShowParametersPrompts to false because I do not want user to refine the search. It looks good until you run the report. The report will refresh itself all the time. The problem caused by ServerReport.SetParameters method in Page_Load. The method cause ReportViewer control to execute the report on the NEXT post back. That is why the page has continuous post-backs. The fix is very simple: do nothing if Page_Load method executed during post-back. 1: protected void Page_Load(object sender, EventArgs e) 2: { 3: if (IsPostBack) 4: { 5: return; 6: } 7: 8: _reportViewer.ProcessingMode = ProcessingMode.Remote; 9: _reportViewer.ShowParameterPrompts = false; 10: 11: var serverReport = _reportViewer.ServerReport; 12: serverReport.ReportServerUrl = new Uri("http://localhost/ReportServer_SQLEXPRESS"); 13: serverReport.ReportPath = "/Reports/TestReport"; 14: 15: var reportParameter1 = new ReportParameter("Parameter1"); 16: reportParameter1.Values.Add("Hello World!"); 17: 18: var reportParameter2 = new ReportParameter("Parameter2"); 19: reportParameter2.Values.Add("10/16/2013"); 20: 21: var reportParameter3 = new ReportParameter("Parameter3"); 22: reportParameter3.Values.Add("10"); 23: 24: serverReport.SetParameters(new[] { reportParameter1, reportParameter2, reportParameter3 }); 25: } You can download sample code from GitHub - https://github.com/ilich/Examples/tree/master/ReportViewerContinuousRefresh

Read the article

24 hours to pass until 24 Hours of PASS

- by Rob Farley

There’s a bunch of stuff going on at the moment in the SQL world, so if you’ve missed this particular piece of news, let me tell you a bit about it. Twice a year, the SQL community puts on its biggest virtual event – 24 Hours of PASS. And the next one is tomorrow – March 21st, 2012. Twenty-four sessions, back-to-back, featuring a selection of some of the best presenters in the SQL world, speakers from all over the world, coming together in an online collaboration that so far has well over thirty thousand registrations across the presentations. Some people are signed up for all 24 sessions, some only one. Traditionally, LiveMeeting has been used as the platform for this event, but this year we’re going with a new platform – IBTalk. It promises big, and we’re hoping it won’t let us down. LiveMeeting has been great, and we thank Microsoft for providing it as a platform for the past few years. However, as the event has grown, we’ve found that a new idea is necessary. Last year a search was done for a new platform, and IBTalk ticked the right boxes. The feedback from the presenters and moderators so far has been overwhelmingly positive, and we’re hoping that this is going to really enhance the user experience. One of my favourite features of the platform is the language side. It provides a pretty good translation service. Users who join a session will see a flag on the left of the screen. If they click it, they can change the language to one of 15 on offer. Picking this changes all the labels on everything. It even translates the text in the Q&A window. What this means is that someone from Brazil can ask their question in Portuguese, and the presenter will see it in English. Then if the answer is typed in English, the questioner will be able to see the answer, also in Portuguese. Or they can switch to English to see it as the answerer typed it. I know there’s always the risk of bad translations going on, but I’ve heard good things about this translation service. But there’s more – IBTalk are providing staff to type up closed captioning live during the event. So if English isn’t your first language, don’t worry! Picking your language will also let you see subtitles in your chosen language. I’m hoping that this event is the start of PASS being able to reach people from all corners of the world. Wouldn’t it be great to find that this event is successful, and that the next 24HOP (later in the year, our Summit Preview event) has just as many non-English speakers tuning in as English speakers? If you haven’t been planning which sessions you’re going to attend, you really should get over to sqlpass.org/24hours and have a look through what’s on offer. There’s some amazing material from some of the industry’s brightest, covering a wide range of topics, from classic SQL areas to the brand new SQL 2012 features. There really should be something for every SQL professional. Check the time zones though – if you’re in the US you might be on Summer time, and an hour closer to GMT than normal. Massive thanks must go to Microsoft, SQL Sentry and Idera for sponsoring this event. Without sponsors we wouldn’t be able to put any of this on. These companies are helping 24HOP continue to grow into an event for the whole world. See you tomorrow! @rob_farley | #24hop | #sqlpass

Read the article

24 hours to pass until 24 Hours of PASS

- by Rob Farley

There’s a bunch of stuff going on at the moment in the SQL world, so if you’ve missed this particular piece of news, let me tell you a bit about it. Twice a year, the SQL community puts on its biggest virtual event – 24 Hours of PASS. And the next one is tomorrow – March 21st, 2012. Twenty-four sessions, back-to-back, featuring a selection of some of the best presenters in the SQL world, speakers from all over the world, coming together in an online collaboration that so far has well over thirty thousand registrations across the presentations. Some people are signed up for all 24 sessions, some only one. Traditionally, LiveMeeting has been used as the platform for this event, but this year we’re going with a new platform – IBTalk. It promises big, and we’re hoping it won’t let us down. LiveMeeting has been great, and we thank Microsoft for providing it as a platform for the past few years. However, as the event has grown, we’ve found that a new idea is necessary. Last year a search was done for a new platform, and IBTalk ticked the right boxes. The feedback from the presenters and moderators so far has been overwhelmingly positive, and we’re hoping that this is going to really enhance the user experience. One of my favourite features of the platform is the language side. It provides a pretty good translation service. Users who join a session will see a flag on the left of the screen. If they click it, they can change the language to one of 15 on offer. Picking this changes all the labels on everything. It even translates the text in the Q&A window. What this means is that someone from Brazil can ask their question in Portuguese, and the presenter will see it in English. Then if the answer is typed in English, the questioner will be able to see the answer, also in Portuguese. Or they can switch to English to see it as the answerer typed it. I know there’s always the risk of bad translations going on, but I’ve heard good things about this translation service. But there’s more – IBTalk are providing staff to type up closed captioning live during the event. So if English isn’t your first language, don’t worry! Picking your language will also let you see subtitles in your chosen language. I’m hoping that this event is the start of PASS being able to reach people from all corners of the world. Wouldn’t it be great to find that this event is successful, and that the next 24HOP (later in the year, our Summit Preview event) has just as many non-English speakers tuning in as English speakers? If you haven’t been planning which sessions you’re going to attend, you really should get over to sqlpass.org/24hours and have a look through what’s on offer. There’s some amazing material from some of the industry’s brightest, covering a wide range of topics, from classic SQL areas to the brand new SQL 2012 features. There really should be something for every SQL professional. Check the time zones though – if you’re in the US you might be on Summer time, and an hour closer to GMT than normal. Massive thanks must go to Microsoft, SQL Sentry and Idera for sponsoring this event. Without sponsors we wouldn’t be able to put any of this on. These companies are helping 24HOP continue to grow into an event for the whole world. See you tomorrow! @rob_farley | #24hop | #sqlpass

Read the article

How do I implement a quaternion based camera?

- by kudor gyozo

I looked at several tutorials about this and when I thought I understood I tried to implement a quaternion based camera. The problem is it doesn't work correctly, after rotating for approx. 10 degrees it jumps back to -10 degrees. I have no idea what's wrong. I'm using openTK and it already has a quaternion class. I'm a noob at opengl, I'm doing this just for fun, and don't really understand quaternions, so probably I'm doing something stupid here. Here is some code: (Actually almost all the code except the methods that load and draw a vbo (it is taken from an OpenTK sample that demonstrates vbo-s)) I load a cube into a vbo and initialize the quaternion for the camera protected override void OnLoad(EventArgs e) { base.OnLoad(e); cameraPos = new Vector3(0, 0, 7); cameraRot = Quaternion.FromAxisAngle(new Vector3(0,0,-1), 0); GL.ClearColor(System.Drawing.Color.MidnightBlue); GL.Enable(EnableCap.DepthTest); vbo = LoadVBO(CubeVertices, CubeElements); } I load a perspective projection here. This is loaded at the beginning and every time I resize the window. protected override void OnResize(EventArgs e) { base.OnResize(e); GL.Viewport(0, 0, Width, Height); float aspect_ratio = Width / (float)Height; Matrix4 perpective = Matrix4.CreatePerspectiveFieldOfView(MathHelper.PiOver4, aspect_ratio, 1, 64); GL.MatrixMode(MatrixMode.Projection); GL.LoadMatrix(ref perpective); } Here I get the last rotation value and create a new quaternion that represents only the last rotation and multiply it with the camera quaternion. After this I transform this into axis-angle so that opengl can use it. (This is how I understood it from several online quaternion tutorials) protected override void OnRenderFrame(FrameEventArgs e) { base.OnRenderFrame(e); GL.Clear(ClearBufferMask.ColorBufferBit | ClearBufferMask.DepthBufferBit); double speed = 1; double rx = 0, ry = 0; if (Keyboard[Key.A]) { ry = -speed * e.Time; } if (Keyboard[Key.D]) { ry = +speed * e.Time; } if (Keyboard[Key.W]) { rx = +speed * e.Time; } if (Keyboard[Key.S]) { rx = -speed * e.Time; } Quaternion tmpQuat = Quaternion.FromAxisAngle(new Vector3(0,1,0), (float)ry); cameraRot = tmpQuat * cameraRot; cameraRot.Normalize(); GL.MatrixMode(MatrixMode.Modelview); GL.LoadIdentity(); Vector3 axis; float angle; cameraRot.ToAxisAngle(out axis, out angle); GL.Rotate(angle, axis); GL.Translate(-cameraPos); Draw(vbo); SwapBuffers(); } Here are 2 images to explain better: I rotate a while and from this: it jumps into this Any help is appreciated. Update1: I add these to a streamwriter that writes into a file: sw.WriteLine("camerarot: X:{0} Y:{1} Z:{2} W:{3} L:{4}", cameraRot.X, cameraRot.Y, cameraRot.Z, cameraRot.W, cameraRot.Length); sw.WriteLine("ry: {0}", ry); The log is available here: http://www.pasteall.org/26133/text. At line 770 the cube jumps from right to left, when camerarot.Y changes signs. I don't know if this is normal. Update2 Here is the complete project.

Search Results

Search found 11924 results on 477 pages for 'openoffice org'.

Page 424/477 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431 | Next Page >

- by mbutz

- by user354862

- by greggory.hz

- by javauser71

- by Aventus

- by dmccollough

- by Damien Carru

- by Zed

- by user809526

- by DigiMortal

- by Greg Mally

- by Brian Dirking

- by Fatherjack

- by Vivek

- by Trevor Bekolay

- by The Geek

- by jamiet

- by Jalpesh P. Vadgama

- by Stephen.Walther

- by Ilya Verbitskiy

- by Rob Farley

- by Rob Farley

- by kudor gyozo

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431 | Next Page >