Search Results

Search found 4617 results on 185 pages for 'html5 animation'.

Page 45/185 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Updating physics for animated models

    - by Mathias Hölzl
    For a new game we have do set up a scene with a minimum of 30 bone animated models.(shooter) The problem is that the update process for the animated models takes too long. Thats what I do: Each character has ~30 bones and for every update tick the animation gets calculated and every bone fires a event with the new matrix. The physics receives the event with the new matrix and updates the collision shape for that bone. The time that it takes to build the animation isn't that bad (0.2ms for 30 Bones - 6ms for 30 models). But the main problem is that the physic engine (Bullet) uses a diffrent matrix for transformation and so its necessary to convert it. Code for matrix conversion: (~0.005ms) btTransform CLEAR_PHYSICS_API Mat_to_btTransform( Mat mat ) { btMatrix3x3 bulletRotation; btVector3 bulletPosition; XMFLOAT4X4 matData = mat.GetStorage(); // copy rotation matrix for ( int row=0; row<3; ++row ) for ( int column=0; column<3; ++column ) bulletRotation[row][column] = matData.m[column][row]; for ( int column=0; column<3; ++column ) bulletPosition[column] = matData.m[3][column]; return btTransform( bulletRotation, bulletPosition ); } The function for updating the transform(Physic): void CLEAR_PHYSICS_API BulletPhysics::VKinematicMove(Mat mat, ActorId aid) { if ( btRigidBody * const body = FindActorBody( aid ) ) { btTransform tmp = Mat_to_btTransform( mat ); body->setWorldTransform( tmp ); } } The real problem is the function FindActorBody(id): ActorIDToBulletActorMap::const_iterator found = m_actorBodies.find( id ); if ( found != m_actorBodies.end() ) return found->second; All physic actors are stored in m_actorBodies and thats why the updating process takes to long. But I have no idea how I could avoid this. Friendly greedings, Mathias

    Read the article

  • Common way of animating 'motion' for walk cycle animations

    - by Ben Hymers
    I've just posted this at the Blender artists' forums before realising I would probably get a better response from a more game development-specific audience, so apologies for cross-posting! It's for the right reasons :) I'm a programmer trying to animate a character walking for a game project, using Ogre. I've made a very simple walk cycle in Blender and exported it to Ogre, and it plays just fine. By fine, I mean it works, but there's terrible foot sliding. This is because I just animated the walk in-place (at the origin) in Blender, and of course I don't know what "speed of walk" that corresponds to, so when I move the character in-game the motion doesn't necessarily match up with the movement of the feet in the animation. So my question is: what's the normal approach for this kind of thing? At work we use Maya, and the animators either animate a special 'moveTrans' node that represents the "position" of the character (or have the exporter generate it for them from the movement of the root node), then the game can read this to know how fast the animation moves the character. So in the Maya file, the character will walk forward for one cycle and this extra node will follow along with them by their feet. I've not seen anything like this in open-source land, and there's certainly no provision for that in the Ogre Exporter script. What do you chaps normally do for this?

    Read the article

  • Player sprite moving slower on iPhone 4

    - by nvillec
    I just finished getting movement/jump animation for a player sprite in Xcode using Cocos2D. The basic movement algorithm is a timer that updates every 0.01 sec, changing the sprite position to (sprite.position.x + xVel, sprite.position.y + yVel). Each time a movement button is tapped, the appropriate velocity (initialized to 0) is changed to whatever speed I choose, then a stop movement button returns the velocity to 0. It's not an ideal solution but I'm very new at this and stoked to at least have that working with little help from the internet. So I may not have explained that perfectly, but it is in fact working to my satisfaction in Xcode's iPhone Simulator, however when I build it for my device and run it on my phone, the sprite's movement speed is noticeably slower than in Xcode. At first I thought it must have to do with the resolution of the iPhone 4, making the sprite's movement path twice as long, but I found that if I pull up the multitask bar, then return to the app the speed will sometimes jump back to normal. My second theory was that the code is just inefficient and is bogging the processes down, but I would see this reflected in the frame rate wouldn't I? It stays at 59-60 the whole time, and the spritesheet animation runs at the correct speed. Has anyone experienced this? Is this a really obvious issue that I'm completely missing? Any help (or tips for optimizing my approach to movement) would be much appreciated!

    Read the article

  • Bejeweled-like game, managing different gem/powerup behaviors?

    - by Wissam
    I thought I'd ask a question and look forward to some insight from this very compelling community. In a Bejeweled-like (Match 3) game, the standard behavior once a valid swap of two adjacent tiles is made is that the resulting matching tiles are destroyed, any tiles now sitting over empty spaces fall to the position above the next present-tile, and any void created above is filled with new tiles. In richer Match-3 games like Bejeweled, 4 in a row (as opposed to just 3) modifies this behavior such that the tile that was swapped is retained, turned into a "flaming" gem, it falls, and then the empty space above is filled. The next time that "flaming gem" is played it explodes and destroys the 8 perimeter tiles, triggers a different animation sequence (neighbors of those 8 tiles being destroyed look like they've been hit by a shockwave then they fall to their respective positions). Scoring is different, the triggered sounds are different, etc. There are even more elaborate behaviors for Match5, Match-cross-pattern, and many powerups that can be purchased, each which produces a more elaborate sequence of events, sounds, animations, scoring, etc... What is the best approach to developing all these different behaviors that respond to players' "move" and her current "performance" and that deviate from the standard sequence of events, scoring, animation, sounds etc, in such a way that we can always flexibly introduce a new "powerup" ? What we are doing now is hard-coding the events of each one, but the task is long and arduous and seems like the wrong approach especially since the game-designers and testers often offer (later) valuable insight on what works better in-game, which means that the code itself may have to be re-written even for minor changes in behavior (say, destroy only 7 neighboring tiles, instead of all 8 in an explosion). ANY pointers for good practices here would be highly appreciated.

    Read the article

  • Mobile Friendly Websites with CSS Media Queries

    - by dwahlin
    In a previous post the concept of CSS media queries was introduced and I discussed the fundamentals of how they can be used to target different screen sizes. I showed how they could be used to convert a 3-column wide page into a more vertical view of data that displays better on devices such as an iPhone:     In this post I'll provide an additional look at how CSS media queries can be used to mobile-enable a sample site called "Widget Masters" without having to change any server-side code or HTML code. The site that will be discussed is shown next:     This site has some of the standard items shown in most websites today including a title area, menu bar, and sections where data is displayed. Without including CSS media queries the site is readable but has to be zoomed out to see everything on a mobile device, cuts-off some of the menu items, and requires horizontal scrolling to get to additional content. The following image shows what the site looks like on an iPhone. While the site works on mobile devices it's definitely not optimized for mobile.     Let's take a look at how CSS media queries can be used to override existing styles in the site based on different screen widths. Adding CSS Media Queries into a Site The Widget Masters Website relies on standard CSS combined with HTML5 elements to provide the layout shown earlier. For example, to layout the menu bar shown at the top of the page the nav element is used as shown next. A standard div element could certainly be used as well if desired.   <nav> <ul class="clearfix"> <li><a href="#home">Home</a></li> <li><a href="#products">Products</a></li> <li><a href="#aboutus">About Us</a></li> <li><a href="#contactus">Contact Us</a></li> <li><a href="#store">Store</a></li> </ul> </nav>   This HTML is combined with the CSS shown next to add a CSS3 gradient, handle the horizontal orientation, and add some general hover effects.   nav { width: 100%; } nav ul { border-radius: 6px; height: 40px; width: 100%; margin: 0; padding: 0; background: rgb(125,126,125); /* Old browsers */ background: -moz-linear-gradient(top, rgba(125,126,125,1) 0%, rgba(14,14,14,1) 100%); /* FF3.6+ */ background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(125,126,125,1)), color-stop(100%,rgba(14,14,14,1))); /* Chrome,Safari4+ */ background: -webkit-linear-gradient(top, rgba(125,126,125,1) 0%, rgba(14,14,14,1) 100%); /* Chrome10+,Safari5.1+ */ background: -o-linear-gradient(top, rgba(125,126,125,1) 0%, rgba(14,14,14,1) 100%); /* Opera 11.10+ */ background: -ms-linear-gradient(top, rgba(125,126,125,1) 0%, rgba(14,14,14,1) 100%); /* IE10+ */ background: linear-gradient(top, rgba(125,126,125,1) 0%, rgba(14,14,14,1) 100%); /* W3C */ filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#7d7e7d', endColorstr='#0e0e0e',GradientType=0 ); /* IE6-9 */ } nav ul > li { list-style: none; float: left; margin: 0; padding: 0; } nav ul > li:first-child { margin-left: 8px; } nav ul > li > a { color: #ccc; text-decoration: none; line-height: 2.8em; font-size: 0.95em; font-weight: bold; padding: 8px 25px 7px 25px; font-family: Arial, Helvetica, sans-serif; } nav ul > li a:hover { background-color: rgba(0, 0, 0, 0.1); color: #fff; }   When mobile devices hit the site the layout of the menu items needs to be adjusted so that they're all visible without having to swipe left or right to get to them. This type of modification can be accomplished using CSS media queries by targeting specific screen sizes. To start, a media query can be added into the site's CSS file as shown next: @media screen and (max-width:320px) { /* CSS style overrides for this screen width go here */ } This media query targets screens that have a maximum width of 320 pixels. Additional types of queries can also be added – refer to my previous post for more details as well as resources that can be used to test media queries in different devices. In that post I emphasize (and I'll emphasize again) that CSS media queries only modify the overall layout and look and feel of a site. They don't optimize the site as far as the size of the images or content sent to the device which is important to keep in mind. To make the navigation menu more accessible on devices such as an iPhone or Android the CSS shown next can be used. This code changes the height of the menu from 40 pixels to 100%, takes off the li element floats, changes the line-height, and changes the margins.   @media screen and (max-width:320px) { nav ul { height: 100%; } nav ul > li { float: none; } nav ul > li a { line-height: 1.5em; } nav ul > li:first-child { margin-left: 0px; } /* Additional CSS overrides go here */ }   The following image shows an example of what the menu look like when run on a device with a width of 320 pixels:   Mobile devices with a maximum width of 480 pixels need different CSS styles applied since they have 160 additional pixels of width. This can be done by adding a new CSS media query into the stylesheet as shown next. Looking through the CSS you'll see that only a minimal override is added to adjust the padding of anchor tags since the menu fits by default in this screen width.   @media screen and (max-width: 480px) { nav ul > li > a { padding: 8px 10px 7px 10px; } }   Running the site on a device with 480 pixels results in the menu shown next being rendered. Notice that the space between the menu items is much smaller compared to what was shown when the main site loads in a standard browser.     In addition to modifying the menu, the 3 horizontal content sections shown earlier can be changed from a horizontal layout to a vertical layout so that they look good on a variety of smaller mobile devices and are easier to navigate by end users. The HTML5 article and section elements are used as containers for the 3 sections in the site as shown next:   <article class="clearfix"> <section id="info"> <header>Why Choose Us?</header> <br /> <img id="mainImage" src="Images/ArticleImage.png" title="Article Image" /> <p> Post emensos insuperabilis expeditionis eventus languentibus partium animis, quas periculorum varietas fregerat et laborum, nondum tubarum cessante clangore vel milite locato per stationes hibernas. </p> </section> <section id="products"> <header>Products</header> <br /> <img id="gearsImage" src="Images/Gears.png" title="Article Image" /> <p> <ul> <li>Widget 1</li> <li>Widget 2</li> <li>Widget 3</li> <li>Widget 4</li> <li>Widget 5</li> </ul> </p> </section> <section id="FAQ"> <header>FAQ</header> <br /> <img id="faqImage" src="Images/faq.png" title="Article Image" /> <p> <ul> <li>FAQ 1</li> <li>FAQ 2</li> <li>FAQ 3</li> <li>FAQ 4</li> <li>FAQ 5</li> </ul> </p> </section> </article>   To force the sections into a vertical layout for smaller mobile devices the CSS styles shown next can be added into the media queries targeting 320 pixel and 480 pixel widths. Styles to target the display size of the images in each section are also included. It's important to note that the original image is still being downloaded from the server and isn't being optimized in any way for the mobile device. It's certainly possible for the CSS to include URL information for a mobile-optimized image if desired. @media screen and (max-width:320px) { section { float: none; width: 97%; margin: 0px; padding: 5px; } #wrapper { padding: 5px; width: 96%; } #mainImage, #gearsImage, #faqImage { width: 100%; height: 100px; } } @media screen and (max-width: 480px) { section { float: none; width: 98%; margin: 0px 0px 10px 0px; padding: 5px; } article > section:last-child { margin-right: 0px; float: none; } #bottomSection { width: 99%; } #wrapper { padding: 5px; width: 96%; } #mainImage, #gearsImage, #faqImage { width: 100%; height: 100px; } }   The following images show the site rendered on an iPhone with the CSS media queries in place. Each of the sections now displays vertically making it much easier for the user to access them. Images inside of each section also scale appropriately to fit properly.     CSS media queries provide a great way to override default styles in a website and target devices with different resolutions. In this post you've seen how CSS media queries can be used to convert a standard browser-based site into a site that is more accessible to mobile users. Although much more can be done to optimize sites for mobile, CSS media queries provide a nice starting point if you don't have the time or resources to create mobile-specific versions of sites.

    Read the article

  • Scripts Casing Flash Intro Animation To Stop [migrated]

    - by ubique
    When my Flash website loads, it freezes halfway through the initial animation for 2-3 seconds and then continues. This obviously doesn't look great and I can't figure out what is causing it. Am thinking it is one of the scripts in index.html causing the issue and have tried all sorts of ways to correct it - what have I done wrong? <!DOCTYPE html> <html lang="en"> <head> <title>company name</title> . . . <link href="style.css" rel="stylesheet" type="text/css" /> <script type="text/javascript" src="js/flashobject.js"></script> <!--[if lt IE 7]> <link href="ie6.css" rel="stylesheet" type="text/css" /> <![endif]--> </head> <body> <header> <hgroup> <h1>company</h1> <h2>company</h2> </hgroup> </header> <div id="container"> <div id="head"> <div class="aligncenter"><a href="http://www.adobe.com/go/EN_US-H-GET-FLASH"> <img src="http://www.adobe.com/images/shared/download_buttons/get_adobe_flash_player.png" alt="" /></a> </div> </div> </div> <div class="g-plus" data-href="https://plus.google.com/100925740920754223119?rel=publisher" data-width="170" data-height="69" data-theme="light"> </body> <!-- Flash --> <script type="text/javascript"> var fo = new FlashObject("main_v10.swf", "head", "100%", "100%", "8", ""); fo.addParam("quality", "high"); fo.addParam("allowFullScreen", "true"); fo.write("head"); </script> <!-- Hello Bar --> <script type="text/javascript" src="//www.hellobar.com/hellobar.js"></script> <script type="text/javascript"> new HelloBar(39040,52484); </script> <!-- GPlus --> <script type="text/javascript"> window.___gcfg = {lang: 'en'}; (function() {var po = document.createElement("script"); po.type = "text/javascript"; po.async = true;po.src = "https://apis.google.com/js/plusone.js"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(po, s); })();</script> <!-- Google --> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-xxxxxxxx-1']); _gaq.push(['_setSiteSpeedSampleRate', 10]); _gaq.push(['_trackPageview']); (function init() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga,s); })(); window.onload = init; </script> </html>

    Read the article

  • Free movement in a tile-based isometric game

    - by xtr486
    Is there a reasonable easy way to implement free movement in a tile-based isometric game? Meaning that the player wouldn't just instantly jump from one tile to another or not be "snapped" to the grid (for example, if the movement between tiles were animated but you'd be locked from doing anything before the animation finishes). I'm a really beginner with anything related to game programming, but with the help of this site and some other resources it was quite easy to do the basic stuff, but I haven't been able to find any useful resources for this particular problem. Currently I've improvised something close to this: http://jsfiddle.net/KwW5b/4/ (WASD movement). The idea for the movement was to use the mouse map to detect when the player has moved to a different tile and then flip the offsets, and for the most part it works correctly (each corner makes the player move to wrong location: see http://www.youtube.com/watch?v=0xr15IaOhrI, which is probably because I couldn't get the full mouse map work properly), but I have no illusions that it is even close to a good/sane solution. And anyway, it's mostly just to demonstrate what kind of a thing I'd like to implement.

    Read the article

  • MD5 vertex skinning problem extending to multi-jointed skeleton (GPU Skinning)

    - by Soapy
    Currently I'm trying to implement GPU skinning in my project. So far I have achieved single joint translation and rotation, and multi-jointed translation. The problem arises when I try to rotate a multi-jointed skeleton. The image above shows the current progress. The left image shows how the model should deform. The middle image shows how it deforms in my project. The right shows a better deform (still not right) inverting a certain value, which I will explain below. The way I get my animation data is by exporting it to the MD5 format (MD5mesh for mesh data and MD5anim for animation data). When I come to parse the animation data, for each frame, I check if the bone has a parent, if not, the data is passed in as is from the MD5anim file. If it does have a parent, I transform the bones position by the parents orientation, and the add this with the parents translation. Then the parent and child orientations get concatenated. This is covered at this website. if (Parent < 0){ ... // Save this data without editing it } else { Math3::vec3 rpos; Math3::quat pq = Parent.Quaternion; Math3::quat pqi(pq); pqi.InvertUnitQuat(); pqi.Normalise(); Math3::quat::RotateVector3(rpos, pq, jv); Math3::vec3 npos(rpos + Parent.Pos); this->Translation = npos; Math3::quat nq = pq * jq; nq.Normalise(); this->Quaternion = nq; } And to achieve the image to the right, all I need to do is to change Math3::quat::RotateVector3(rpos, pq, jv); to Math3::quat::RotateVector3(rpos, pqi, jv);, why is that? And this is my skinning shader. SkinningShader.vert #version 330 core smooth out vec2 vVaryingTexCoords; smooth out vec3 vVaryingNormals; smooth out vec4 vWeightColor; uniform mat4 MV; uniform mat4 MVP; uniform mat4 Pallete[55]; uniform mat4 invBindPose[55]; layout(location = 0) in vec3 vPos; layout(location = 1) in vec2 vTexCoords; layout(location = 2) in vec3 vNormals; layout(location = 3) in int vSkeleton[4]; layout(location = 4) in vec3 vWeight; void main() { vec4 wpos = vec4(vPos, 1.0); vec4 norm = vec4(vNormals, 0.0); vec4 weight = vec4(vWeight, (1.0f-(vWeight[0] + vWeight[1] + vWeight[2]))); normalize(weight); mat4 BoneTransform; for(int i = 0; i < 4; i++) { if(vSkeleton[i] != -1) { if(i == 0) { // These are interchangable for some reason // BoneTransform = ((invBindPose[vSkeleton[i]] * Pallete[vSkeleton[i]]) * weight[i]); BoneTransform = ((Pallete[vSkeleton[i]] * invBindPose[vSkeleton[i]]) * weight[i]); } else { // These are interchangable for some reason // BoneTransform += ((invBindPose[vSkeleton[i]] * Pallete[vSkeleton[i]]) * weight[i]); BoneTransform += ((Pallete[vSkeleton[i]] * invBindPose[vSkeleton[i]]) * weight[i]); } } } wpos = BoneTransform * wpos; vWeightColor = weight; vVaryingTexCoords = vTexCoords; vVaryingNormals = normalize(vec3(vec4(vNormals, 0.0) * MV)); gl_Position = wpos * MVP; } The Pallete matrices are the matrices calculated using the above code (a rotation and translation matrix get created from the translation and quaternion). The invBindPose matrices are simply the inverted matrices created from the joints in the MD5mesh file. Update 1 I looked at GLM to compare the values I get with my own implementation. They turn out to be exactly the same. So now i'm checking if there's a problem with matrix creation... Update 2 Looked at GLM again to compare matrix creation using quaternions. Turns out that's not the problem either.

    Read the article

  • Hierarchical animations in DirectX and handling seperate animations on the same mesh?

    - by meds
    I have a hierarchical animated model in DirectX which loads and animates based on the following DirectX sample: http://msdn.microsoft.com/en-us/library/ee418677%28VS.85%29.aspx As good as the sample is it does not really go into some of the details of animation that I'd like. For example, if I have a mesh which has a running animation and a throwing animation as seperate animation sets how can I get the throwing animation to occur for bones above the hip and the walking animation to occur for bones underneath the hip? Also if I wanted to for example have the person lean left or right would I simply have to find the bone for the hip and multiplay a rotation matrix by its matrix? In this case I think the matrix is m_amxBoneOffsets?

    Read the article

  • how to retain the animated position in opengl es 2.0

    - by Arun AC
    I am doing frame based animation for 300 frames in opengl es 2.0 I want a rectangle to translate by +200 pixels in X axis and also scaled up by double (2 units) in the first 100 frames Then, the animated rectangle has to stay there for the next 100 frames. Then, I want the same animated rectangle to translate by +200 pixels in X axis and also scaled down by half (0.5 units) in the last 100 frames. I am using simple linear interpolation to calculate the delta-animation value for each frame. Pseudo code: The below drawFrame() is executed for 300 times (300 frames) in a loop. float RectMVMatrix[4][4] = {1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1 }; // identity matrix int totalframes = 300; float translate-delta; // interpolated translation value for each frame float scale-delta; // interpolated scale value for each frame // The usual code for draw is: void drawFrame(int iCurrentFrame) { // mySetIdentity(RectMVMatrix); // comment this line to retain the animated position. mytranslate(RectMVMatrix, translate-delta, X_AXIS); // to translate the mv matrix in x axis by translate-delta value myscale(RectMVMatrix, scale-delta); // to scale the mv matrix by scale-delta value ... // opengl calls glDrawArrays(...); eglswapbuffers(...); } The above code will work fine for first 100 frames. in order to retain the animated rectangle during the frames 101 to 200, i removed the "mySetIdentity(RectMVMatrix);" in the above drawFrame(). Now on entering the drawFrame() for the 2nd frame, the RectMVMatrix will have the animated value of first frame e.g. RectMVMatrix[4][4] = { 1.01, 0, 0, 2, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1 };// 2 pixels translation and 1.01 units scaling after first frame This RectMVMatrix is used for mytranslate() in 2nd frame. The translate function will affect the value of "RectMVMatrix[0][0]". Thus translation affects the scaling values also. Eventually output is getting wrong. How to retain the animated position without affecting the current ModelView matrix? =========================================== I got the solution... Thanks to Sergio. I created separate matrices for translation and scaling. e.g.CurrentTranslateMatrix[4][4], CurrentScaleMatrix[4][4]. Then for every frame, I reset 'CurrentTranslateMatrix' to identity and call mytranslate( CurrentTranslateMatrix, translate-delta, X_AXIS) function. I reset 'CurrentScaleMatrix' to identity and call myscale(CurrentScaleMatrix, scale-delta) function. Then, I multiplied these 'CurrentTranslateMatrix' and 'CurrentScaleMatrix' to get the final 'RectMVMatrix' Matrix for the frame. Pseudo Code: float RectMVMatrix[4][4] = {0}; float CurrentTranslateMatrix[4][4] = {0}; float CurrentScaleMatrix[4][4] = {0}; int iTotalFrames = 300; int iAnimationFrames = 100; int iTranslate_X = 200.0f; // in pixels float fScale_X = 2.0f; float scaleDelta; float translateDelta_X; void DrawRect(int iTotalFrames) { mySetIdentity(RectMVMatrix); for (int i = 0; i< iTotalFrames; i++) { DrawFrame(int iCurrentFrame); } } void getInterpolatedValue(int iStartFrame, int iEndFrame, int iTotalFrame, int iCurrentFrame, float *scaleDelta, float *translateDelta_X) { float fDelta = float ( (iCurrentFrame - iStartFrame) / (iEndFrame - iStartFrame)) float fStartX = 0.0f; float fEndX = ConvertPixelsToOpenGLUnit(iTranslate_X); *translateDelta_X = fStartX + fDelta * (fEndX - fStartX); float fStartScaleX = 1.0f; float fEndScaleX = fScale_X; *scaleDelta = fStartScaleX + fDelta * (fEndScaleX - fStartScaleX); } void DrawFrame(int iCurrentFrame) { getInterpolatedValue(0, iAnimationFrames, iTotalFrames, iCurrentFrame, &scaleDelta, &translateDelta_X) mySetIdentity(CurrentTranslateMatrix); myTranslate(RectMVMatrix, translateDelta_X, X_AXIS); // to translate the mv matrix in x axis by translate-delta value mySetIdentity(CurrentScaleMatrix); myScale(RectMVMatrix, scaleDelta); // to scale the mv matrix by scale-delta value myMultiplyMatrix(RectMVMatrix, CurrentTranslateMatrix, CurrentScaleMatrix);// RectMVMatrix = CurrentTranslateMatrix*CurrentScaleMatrix; ... // opengl calls glDrawArrays(...); eglswapbuffers(...); } I maintained this 'RectMVMatrix' value, if there is no animation for the current frame (e.g. 101th frame onwards). Thanks, Arun AC

    Read the article

  • I need help in animation of realistic page movement of pdf. just like code-flakes.com

    - by srnm12
    hi guys, i have to move the page of pdf in realistic way as you can see in code-flakes.com code-flakes have commercial api's but i want to write my own one. I got something that we can achieve this by using flash. flash will provide animation of realistic page movement. i don't know anymore guys.. Let me know how to this can be done? if you source send me on my id mohit.movil at gmail dot com any help will be great appreciate for me.. thnks

    Read the article

  • How can I tweak this A* search pathfinding algorithm to handle different terrain movement values?

    - by user422318
    I'm creating a 2D map-based action game with similar interaction design as Diablo II. In other words, the player clicks around a map to move their player. I just finished player movement and am moving on to pathfinding. In the game, enemies should charge the player's character. There are also five different terrain types that give different movement bonuses. I want the AI to take advantage of these terrain bonuses as they try to reach the player. I was told to check out the A* search algorithm (http://en.wikipedia.org/wiki/A*_search_algorithm). I'm doing this game in HTML5 and JavaScript, and found a version in JavaScript: http://www.briangrinstead.com/blog/astar-search-algorithm-in-javascript I'm trying to figure out how to tweak it though. Below are my ideas about what I need to change. What else do I need to worry about? When I create a graph, I will need to initialize the 2D array I pass in passed on with a traversal of a map that corresponds to the different terrain types. in graph.js: "GraphNodeType" definition needs to be modified to handle the 5 terrain types. There will be no walls. in astar.js: The g and h scoring will need to be modified. How should I do this? in astar.js: isWall() should probably be removed. My game doesn't have walls. in astar.js: I'm not sure what this is. I think it indicates a node that isn't valid to be processed. When would this happen, though? At a high level, how do I change this algorithm from "oh, is there a wall there?" to "will this terrain get me to the player faster than the terrain around me?" Because of time, I'm also debating reusing my Bresenham algorithm for the enemies. Unfortunately, the different terrain movement bonuses won't be used by the AI, which will make the game suck. :/ I'd really like to have this in for the prototype, but I'm not a developer by trade nor am I a computer scientist. :D If you know of any code that does what I'm looking for, please share! Sanity check tips for this are also appreciated.

    Read the article

  • what would be a good way to implement/render a 2d tiled map for a browser game?

    - by jj_
    I've made this little rpg ruby game I did while learning and now I'd like to make it into a browser game. I've already set up Sinatra framework to serve it, so what I am looking for, before everything else, is a way to represent the game map in browser (location attributes are stored in db). A new map is randomly generated by code for each new game at each game start. For now forget db, and let's say a map (say 100x100 "squares") is stored as a tridimensional array. (x,y, ...) Last "dimension" of array stores who & what is at that map cell: a player, a building, whatever. So all I have to do is render those "squares" or array cells to a 2d tiled map in the browser. The map does not need to refresh or be dynamically fetched as you scroll it, (at least at this stage of development) but, a technology which would allow me to do so in future would be a good reason for choosing it. Things that I thought of: html tables, html5 canvas, some js framework which is designed exactly with this purpose (which I do not know of = please advice). Yes I know about gamequery-js framework, but I've never used it, and I don't know if it's going to slow down everything down to inusability as I'm adding new features (scrolling, ajax). I really don't know of any other alternatives.. maybe there are lighter approaches? Easier or more minimalistic ways ? More targeted js framework which is the right tool for the job? Maybe just some html canvas code, or even simple image maps, or images with absolute positioning will be enough? The thing is I'd like to start simple, and then gradually make it better, so, as I said before, I'd prefer something that will give me room for improvement or is headed toward new web tendencies but which will also give me a bit of gratification in the beginning :) So.. advices are needed! And appreciated! :) Thanks p.s. Flash is excluded because I don't like it.

    Read the article

  • iPhone: Waiting until selectrow animation finishes before pushing viewcontroller?

    - by Mike
    My code looks like this: NSIndexPath *ip = [NSIndexPath indexPathForRow:15 inSection:0]; [[self tableView] selectRowAtIndexPath:ip animated:YES scrollPosition:UITableViewScrollPositionMiddle]; // Pause needed here until animation finishes [[self navigationController] pushViewController:secondView animated:YES]; Right now it animates the scroll/selection of the row and pushes the view controller at the same time. What I would like it to do is wait until it finishes the scroll/selection and then push the view controller. Is there any possible way of doing this? Thanks

    Read the article

  • How to future-proof my touch-enabled web application?

    - by Rice Flour Cookies
    I recently went out and purchased a touch-screen monitor with the intention of learning how to program touch-enabled web applications. I had reviewed the MDN documentation about touch events, as well as the W3C specification. To get started, I wrote a very short test page with two event handlers: one for the mousedown event and one for the touchstart event. I fired up the web page in IE and touched the document and found that only the mousedown event fired. I saw the same behavior with Firefox, only to find out later that Firefox can be set to enable the touchstart event using about:config. When touch events are enabled, the touchstart event fires, but not mousedown. Chrome was even stranger: it fired both events when I touched the document: touchstart and mousedown, in that order. Only on my Android phone does it appear to be the case that only the touchstart event fires when I touch the document. I did a a Google search and ended up on two interesting pages. First, I found the page on CanIUse for touch events: http://caniuse.com/#feat=touch Can I Use clearly indicates that IE does not support touch events as of this writing, and Firefox only supports touch events if they are manually enabled. Furthermore, all four browsers I mentioned treat the touch in a completely different way. It boils down to this: IE: simulated mouse click Firefox with touch disabled: simulated mouse click Firefox with touch enabled: touch event Chrome: touch event and simulated mouse click Android: touch event What is more frustrating is that Google also found a Microsoft page called RethinkIE. RethinkIE brags about touch support in IE; as a matter of fact, one of their slogans is "Touch the Web". It links to a number of touch-based application. I followed some of these links, and as best I can tell, it's just like CanIUse described; no proper touch support; just simulated mouse clicks. The MDN (https://developer.mozilla.org/en-US/docs/Web/API/Touch) and W3C (http://www.w3.org/TR/touch-events/) documentation describe a far richer interface; an interface that doesn't just simulate mouse clicks, but keeps track of multiple touches at once, the contact area, rotation, and force of each touch, and unique identifiers for each touch so that they can be tracked individually. I don't see how simulated mouse clicks can ever touch the above described functionality, which, once again, is part of the W3C specification, although it is listed as "non-normative", meaning that a browser can claim to be standards-compliant without implementing it. (Why bother making it part of the standard, then?) What motivated my research is that I've written an HTML5 application that doesn't work on Android because Android doesn't fire mouse events. I'm now afraid to try to implement touch for my application because the browsers all behave so differently. I imagine that at some time in the future, the browsers might start handling touch similarly, but how can I tell how they might be handled in the future short of writing code to handle the behavior of each individual browser? Is it possible to write code today that will work with touch-enabled browsers for years to come? If so, how?

    Read the article

  • Prefilling an SMS on Mobile Devices with the sms: Uri Scheme

    - by Rick Strahl
    Popping up the native SMS app from a mobile HTML Web page is a nice feature that allows you to pre-fill info into a text for sending by a user of your mobile site. The syntax is a bit tricky due to some device inconsistencies (and quite a bit of wrong/incomplete info on the Web), but it's definitely something that's fairly easy to do.In one of my Mobile HTML Web apps I need to share a current location via SMS. While browsing around a page I want to select a geo location, then share it by texting it to somebody. Basically I want to pre-fill an SMS message with some text, but no name or number, which instead will be filled in by the user.What worksThe syntax that seems to work fairly consistently except for iOS is this:sms:phonenumber?body=messageFor iOS instead of the ? use a ';' (because Apple is always right, standards be damned, right?):sms:phonenumber;body=messageand that works to pop up a new SMS message on the mobile device. I've only marginally tested this with a few devices: an iPhone running iOS 6, an iPad running iOS 7, Windows Phone 8 and a Nexus S in the Android Emulator. All four devices managed to pop up the SMS with the data prefilled.You can use this in a link:<a href="sms:1-111-1111;body=I made it!">Send location via SMS</a>or you can set it on the window.location in JavaScript:window.location ="sms:1-111-1111;body=" + encodeURIComponent("I made it!");to make the window pop up directly from code. Notice that the content should be URL encoded - HTML links automatically encode, but when you assign the URL directly in code the text value should be encoded.Body onlyI suspect in most applications you won't know who to text, so you only want to fill the text body, not the number. That works as you'd expect by just leaving out the number - here's what the URLs look like in that case:sms:?body=messageFor iOS same thing except with the ;sms:;body=messageHere's an example of the code I use to set up the SMS:var ua = navigator.userAgent.toLowerCase(); var url; if (ua.indexOf("iphone") > -1 || ua.indexOf("ipad") > -1) url = "sms:;body=" + encodeURIComponent("I'm at " + mapUrl + " @ " + pos.Address); else url = "sms:?body=" + encodeURIComponent("I'm at " + mapUrl + " @ " + pos.Address); location.href = url;and that also works for all the devices mentioned above.It's pretty cool that URL schemes exist to access device functionality and the SMS one will come in pretty handy for a number of things. Now if only all of the URI schemes were a bit more consistent (damn you Apple!) across devices...© Rick Strahl, West Wind Technologies, 2005-2013Posted in IOS  JavaScript  HTML5   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • SVG animation along path with Raphael

    - by Toby Hede
    I have a rather interesting issue with SVG animation. I am animating along a circular path using Raphael obj = canvas.circle(x, y, size); path = canvas.circlePath(x, y, radius); path = canvas.path(path); //generate path from path value string obj.animateAlong(path, rate, false); The circlePath method is one I have created myself to generate the circle path in SVG path notation: Raphael.fn.circlePath = function(x , y, r) { var s = "M" + x + "," + (y-r) + "A"+r+","+r+",0,1,1,"+(x-0.1)+","+(y-r)+" z"; return s; } So far, so good. This all works. I have my object (obj) animating along the circular path. BUT: The animation only works if I create the object at the same X, Y coords as the path itself. If I start the animation from any other coordinates (say, half-way along the path) the object animates in a circle of the correct radius, however it starts the animation from the object X,Y coordinates, rather than along the path as it is displayed visually. Ideally I would like to be able to stop/start the animation - the same problem occurs on restart. When I stop then restart the animation, it animates in a circle starting from the stopped X,Y.

    Read the article

  • How to do a Translate Animation for both axis(X, Y) at the same time?

    - by user1235555
    I am doing something like this in my Storyboard method but not able to achieve the desired result. This animation I want to be played after the page is loaded. private void PhoneApplicationPage_Loaded(object sender, RoutedEventArgs e) { CreateTranslateAnimation(image1); } private void CreateTranslateAnimation(UIElement source) { Storyboard sb = new Storyboard(); DoubleAnimationUsingKeyFrames animationFirstX = new DoubleAnimationUsingKeyFrames(); source.RenderTransform = new CompositeTransform(); Storyboard.SetTargetProperty(animationFirstX, new PropertyPath(CompositeTransform.TranslateXProperty)); Storyboard.SetTarget(animationFirstX, source.RenderTransform); animationFirstX.KeyFrames.Add(new EasingDoubleKeyFrame() { KeyTime = kt1, Value = 20 }); DoubleAnimationUsingKeyFrames animationFirstY = new DoubleAnimationUsingKeyFrames(); source.RenderTransform = new CompositeTransform(); Storyboard.SetTargetProperty(animationFirstY, new PropertyPath(CompositeTransform.TranslateYProperty)); Storyboard.SetTarget(animationFirstY, source.RenderTransform); animationFirstY.KeyFrames.Add(new EasingDoubleKeyFrame() { KeyTime = kt1, Value = 30 }); sb.Children.Add(animationFirstX); sb.Children.Add(animationFirstY); sb.Begin(); } Too cut it short... I want to write .cs code equivalent to this code <Storyboard x:Name="Storyboard1"> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.TranslateX)" Storyboard.TargetName="image1"> <EasingDoubleKeyFrame KeyTime="0:0:0.5" Value="20"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.TranslateY)" Storyboard.TargetName="image1"> <EasingDoubleKeyFrame KeyTime="0:0:0.5" Value="30"/> </DoubleAnimationUsingKeyFrames> </Storyboard>

    Read the article

  • Why is setting HTML5's CanvasPixelArray values ridiculously slow and how can I do it faster?

    - by Nixuz
    I am trying to do some dynamic visual effects using the HTML 5 canvas' pixel manipulation, but I am running into a problem where setting pixels in the CanvasPixelArray is ridiculously slow. For example if I have code like: imageData = ctx.getImageData(0, 0, 500, 500); for (var i = 0; i < imageData.length; i += 4){ imageData.data[i] = buffer[i]; imageData.data[i + 1] = buffer[i + 1]; imageData.data[i + 2] = buffer[i + 2]; } ctx.putImageData(imageData, 0, 0); Profiling with Chrome reveals, it runs 44% slower than the following code where CanvasPixelArray is not used. tempArray = new Array(500 * 500 * 4); imageData = ctx.getImageData(0, 0, 500, 500); for (var i = 0; i < imageData.length; i += 4){ tempArray[i] = buffer[i]; tempArray[i + 1] = buffer[i + 1]; tempArray[i + 2] = buffer[i + 2]; } ctx.putImageData(imageData, 0, 0); My guess is that the reason for this slowdown is due to the conversion between the Javascript doubles and the internal unsigned 8bit integers, used by the CanvasPixelArray. Is this guess correct? Is there anyway to reduce the time spent setting values in the CanvasPixelArray?

    Read the article

  • Can the behaviour of new HTML5 form types be overridden?

    - by Mark Perkins
    I was wondering if anyone knew if it were possible to override the default behaviour of browsers that support the new HTML input types such as type="email" and type="date"? I appreciate that I could test if a browser supports an input type and provide a fallback for those browsers that don't, but what I want to know is is there any way to prevent that default behaviour from happening in browsers that do support it? For instance, if in Opera I want to use the date input type, but I don't want Opera to display the native datepicker (i.e. I want to replace it with my own custom one) is that possible? Are there any DOM events triggered like onDatePickerShow that one can hook into? I don't believe that this is possible, but if anyone knows for sure one way or the other I would love to hear from you.

    Read the article

  • How do I place a DIV tag image on the very top of the page in HTML5?

    - by Jacob
    Hello there. I'm trying to put an x-repeat "grid" of images by using background-image in CSS, then using the id in a DIV tag. My intention is to put a sort of "panel", then always extends to the very top of the page, and loops with repeat-x. It works just fine without a DOCTYPE, but when I put the clean in the code, it pushes the image in the tag downwards, as if there's a margin on the top of the page of about 15 px or so. I tried top-margin, z-index, with no success. Excuse me if I'm asking a silly question, but I'm sort of new. Thanks, -Jacob

    Read the article

  • Why is setting HTML5's CanvasPixelArray values is ridiculously slow and how can I do it faster?

    - by Nixuz
    I am trying to do some dynamic visual effects using the HTML 5 canvas' pixel manipulation, but I am running into a problem where setting pixels in the CanvasPixelArray is ridiculously slow. For example if I have code like: imageData = ctx.getImageData(0, 0, 500, 500); for (var i = 0; i < imageData.length; i += 4){ imageData.data[index] = buffer[i]; imageData.data[index + 1] = buffer[i]; imageData.data[index + 2] = buffer[i]; } ctx.putImageData(imageData, 0, 0); Profiling with Chrome reveals, it runs 44% slower than the following code where CanvasPixelArray is not used. tempArray = new Array(500 * 500 * 4); imageData = ctx.getImageData(0, 0, 500, 500); for (var i = 0; i < imageData.length; i += 4){ tempArray[index] = buffer[i]; tempArray[index + 1] = buffer[i]; tempArray[index + 2] = buffer[i]; } ctx.putImageData(imageData, 0, 0); My guess is that the reason for this slowdown is due to the conversion between the Javascript doubles and the internal unsigned 8bit integers, used by the CanvasPixelArray. Is this guess correct? Is there anyway to reduce the time spent setting values in the CanvasPixelArray?

    Read the article

  • Html5 Audio plays only once in my Javascript code.

    - by Poul
    I have a dashboard web-app that I want to play an alert sound if its having problems connecting. The site's ajax code will poll for data and throttle down its refresh rate if it can't connect. Once the server comes back up, the site will continue working. In the mean time I would like a sound to play each time it can't connect (so I know to check the server). Here is that code. This code works. var error_audio = new Audio("audio/"+settings.refresh.error_audio); error_audio.load(); //this gets called when there is a connection error. function onConnectionError() { error_audio.play(); } However the 2nd time through the function the audio doesn't play. Digging around in Chrome's debugger the 'played' attribute in the audio element gets set to true. Setting it to false has no results. Any ideas?

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >