Search Results

Search found 32277 results on 1292 pages for 'module development'.

Page 469/1292 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

  • Generating geometry when using VBO

    - by onedayitwillmake
    Currently I am working on a project in which I generate geometry based on the players movement. A glorified very long trail, composed of quads. I am doing this by storing a STD::Vector, and removing the oldest verticies once enough exist, and then calling glDrawArrays. I am interested in switching to a shader based model, usually examples I see the VBO is generated at start and then that's basically it. What is the best route to go about creating geometry in real time, using shader / VBO approach

    Read the article

  • Serverside memory efficiency and threading for a turn based game

    - by SkeletorFromEterenia
    Im programming on a turn based war-game for some years now (along with the engine) and Im having quite a hard time at figuring out what the games server architecture should look like, since most game server architecture articles I found focus either on FPS oder MMOGs, which doesn't really fit since I want many matches with 1- 16 players on my server, with each match being played in turn based mode. My chief concern is memory usage, since the most basic approach of loading every game that is being played completely into RAM should be quite inefficient, so is there a suitable strategy for selecting only the needed bits and loading them? Another question I got is how to design the threading on the server, since I think using only a single thread could be a problem due to the fact that the game or part of it might have to be loaded from the database. I would be very happy if you could share your knowledge or point me to material on this topic.

    Read the article

  • Who owns the intellectual property to Fragile Allegiance?

    - by analytik
    Fragile Allegiance was developed by Gremlin Interactive, which was later acquired by Infogrames (Atari). I couldn't find any details of the acquisition though. The only interesting thing I have found online is that the owner of the registered trademark Fragile Allegiance is Interplay, who published Fragile Allegiance. However, the only copyright note I've found was in one installation .ini file, claiming it for Gremlin. What are the common business practices when it comes to old, unused IPs? What do publishers/developers actually need to legally claim an intellectual property? Does anyone have an experience with contacting big publishers with copyright/IP inquiries? Related legal question.

    Read the article

  • Lighting get darker when texture is aplied

    - by noah
    Im using OpenGL ES 1.1 for iPhone. I'm attempting to implement a skybox in my 3d world and started out by following one of Jeff Lamarches tutorials on creating textures. Heres the tutorial: iphonedevelopment.blogspot.com/2009/05/opengl-es-from-ground-up-part-6_25.html Ive successfully added the image to my 3d world but am not sure why the lighting on the other shapes has changed so much. I want the shapes to be the original color and have the image in the background. Before: https://www.dropbox.com/s/ojmb8793vj514h0/Screen%20Shot%202012-10-01%20at%205.34.44%20PM.png After: https://www.dropbox.com/s/8v6yvur8amgudia/Screen%20Shot%202012-10-01%20at%205.35.31%20PM.png Heres the init OpenGL: - (void)initOpenGLES1 { glShadeModel(GL_SMOOTH); // Enable lighting glEnable(GL_LIGHTING); // Turn the first light on glEnable(GL_LIGHT0); const GLfloat lightAmbient[] = {0.2, 0.2, 0.2, 1.0}; const GLfloat lightDiffuse[] = {0.8, 0.8, 0.8, 1.0}; const GLfloat matAmbient[] = {0.3, 0.3, 0.3, 0.5}; const GLfloat matDiffuse[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat matSpecular[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat lightPosition[] = {0.0, 0.0, 1.0, 0.0}; const GLfloat lightShininess = 100.0; //Configure OpenGL lighting glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, matAmbient); glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, matDiffuse); glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, matSpecular); glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, lightShininess); glLightfv(GL_LIGHT0, GL_AMBIENT, lightAmbient); glLightfv(GL_LIGHT0, GL_DIFFUSE, lightDiffuse); glLightfv(GL_LIGHT0, GL_POSITION, lightPosition); // Define a cutoff angle glLightf(GL_LIGHT0, GL_SPOT_CUTOFF, 40.0); // Set the clear color glClearColor(0, 0, 0, 1.0f); // Projection Matrix config glMatrixMode(GL_PROJECTION); glLoadIdentity(); CGSize layerSize = self.view.layer.frame.size; // Swapped height and width for landscape mode gluPerspective(45.0f, (GLfloat)layerSize.height / (GLfloat)layerSize.width, 0.1f, 750.0f); [self initSkyBox]; // Modelview Matrix config glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // This next line is not really needed as it is the default for OpenGL ES glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glDisable(GL_BLEND); // Enable depth testing glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LESS); glDepthMask(GL_TRUE); } Heres the drawSkybox that gets called in the drawFrame method: -(void)drawSkyBox { glDisable(GL_LIGHTING); glDisable(GL_DEPTH_TEST); glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); static const SSVertex3D vertices[] = { {-1.0, 1.0, -0.0}, { 1.0, 1.0, -0.0}, {-1.0, -1.0, -0.0}, { 1.0, -1.0, -0.0} }; static const SSVertex3D normals[] = { {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0} }; static const GLfloat texCoords[] = { 0.0, 0.5, 0.5, 0.5, 0.0, 0.0, 0.5, 0.0 }; glLoadIdentity(); glTranslatef(0.0, 0.0, -3.0); glBindTexture(GL_TEXTURE_2D, texture[0]); glVertexPointer(3, GL_FLOAT, 0, vertices); glNormalPointer(GL_FLOAT, 0, normals); glTexCoordPointer(2, GL_FLOAT, 0, texCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glEnable(GL_LIGHTING); glEnable(GL_DEPTH_TEST); } Heres the init Skybox: -(void)initSkyBox { // Turn necessary features on glEnable(GL_TEXTURE_2D); glEnable(GL_BLEND); glBlendFunc(GL_ONE, GL_SRC_COLOR); // Bind the number of textures we need, in this case one. glGenTextures(1, &texture[0]); // create a texture obj, give unique ID glBindTexture(GL_TEXTURE_2D, texture[0]); // load our new texture name into the current texture glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); NSString *path = [[NSBundle mainBundle] pathForResource:@"space" ofType:@"jpg"]; NSData *texData = [[NSData alloc] initWithContentsOfFile:path]; UIImage *image = [[UIImage alloc] initWithData:texData]; GLuint width = CGImageGetWidth(image.CGImage); GLuint height = CGImageGetHeight(image.CGImage); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); void *imageData = malloc( height * width * 4 ); // times 4 because will write one byte for rgb and alpha CGContextRef cgContext = CGBitmapContextCreate( imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big ); // Flip the Y-axis CGContextTranslateCTM (cgContext, 0, height); CGContextScaleCTM (cgContext, 1.0, -1.0); CGColorSpaceRelease( colorSpace ); CGContextClearRect( cgContext, CGRectMake( 0, 0, width, height ) ); CGContextDrawImage( cgContext, CGRectMake( 0, 0, width, height ), image.CGImage ); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); CGContextRelease(cgContext); free(imageData); [image release]; [texData release]; } Any help is greatly appreciated.

    Read the article

  • Does use of simple shaders improve performace/battery life?

    - by Miro
    I'm making OpenGL game for Android. Till now i've used only fixed function pipeline, but i'm rendering simple things. Fixed function pipeline includes a lot of stuff i don't need. So i'm thinking about implementing shaders in my game to simplify OpenGL pipeline if it can make better performance. Better performance = better battery life, unless fps is limited by software limit, not hardware power.

    Read the article

  • My vertex shader doesn't affect texture coords or diffuse info but works for position

    - by tina nyaa
    I am new to 3D and DirectX - in the past I have only used abstractions for 2D drawing. Over the past month I've been studying really hard and I'm trying to modify and adapt some of the shaders as part of my personal 'study project'. Below I have a shader, modified from one of the Microsoft samples. I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? // // Skinned Mesh Effect file // Copyright (c) 2000-2002 Microsoft Corporation. All rights reserved. // float4 lhtDir = {0.0f, 0.0f, -1.0f, 1.0f}; //light Direction float4 lightDiffuse = {0.6f, 0.6f, 0.6f, 1.0f}; // Light Diffuse float4 MaterialAmbient : MATERIALAMBIENT = {0.1f, 0.1f, 0.1f, 1.0f}; float4 MaterialDiffuse : MATERIALDIFFUSE = {0.8f, 0.8f, 0.8f, 1.0f}; // Matrix Pallette static const int MAX_MATRICES = 100; float4x3 mWorldMatrixArray[MAX_MATRICES] : WORLDMATRIXARRAY; float4x4 mViewProj : VIEWPROJECTION; /////////////////////////////////////////////////////// struct VS_INPUT { float4 Pos : POSITION; float4 BlendWeights : BLENDWEIGHT; float4 BlendIndices : BLENDINDICES; float3 Normal : NORMAL; float3 Tex0 : TEXCOORD0; }; struct VS_OUTPUT { float4 Pos : POSITION; float4 Diffuse : COLOR; float2 Tex0 : TEXCOORD0; }; float3 Diffuse(float3 Normal) { float CosTheta; // N.L Clamped CosTheta = max(0.0f, dot(Normal, lhtDir.xyz)); // propogate scalar result to vector return (CosTheta); } VS_OUTPUT VShade(VS_INPUT i, uniform int NumBones) { VS_OUTPUT o; float3 Pos = 0.0f; float3 Normal = 0.0f; float LastWeight = 0.0f; // Compensate for lack of UBYTE4 on Geforce3 int4 IndexVector = D3DCOLORtoUBYTE4(i.BlendIndices); // cast the vectors to arrays for use in the for loop below float BlendWeightsArray[4] = (float[4])i.BlendWeights; int IndexArray[4] = (int[4])IndexVector; // calculate the pos/normal using the "normal" weights // and accumulate the weights to calculate the last weight for (int iBone = 0; iBone < NumBones-1; iBone++) { LastWeight = LastWeight + BlendWeightsArray[iBone]; Pos += mul(i.Pos, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; Normal += mul(i.Normal, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; } LastWeight = 1.0f - LastWeight; // Now that we have the calculated weight, add in the final influence Pos += (mul(i.Pos, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); Normal += (mul(i.Normal, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); // transform position from world space into view and then projection space //o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Diffuse.x = 0.0f; o.Diffuse.y = 0.0f; o.Diffuse.z = 0.0f; o.Diffuse.w = 0.0f; o.Tex0 = float2(0,0); return o; } technique t0 { pass p0 { VertexShader = compile vs_3_0 VShade(4); } } I am currently using the SlimDX .NET wrapper around DirectX, but the API is extremely similar: public void Draw() { var device = vertexBuffer.Device; device.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.White, 1.0f, 0); device.SetRenderState(RenderState.Lighting, true); device.SetRenderState(RenderState.DitherEnable, true); device.SetRenderState(RenderState.ZEnable, true); device.SetRenderState(RenderState.CullMode, Cull.Counterclockwise); device.SetRenderState(RenderState.NormalizeNormals, true); device.SetSamplerState(0, SamplerState.MagFilter, TextureFilter.Anisotropic); device.SetSamplerState(0, SamplerState.MinFilter, TextureFilter.Anisotropic); device.SetTransform(TransformState.World, Matrix.Identity * Matrix.Translation(0, -50, 0)); device.SetTransform(TransformState.View, Matrix.LookAtLH(new Vector3(-200, 0, 0), Vector3.Zero, Vector3.UnitY)); device.SetTransform(TransformState.Projection, Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); var material = new Material(); material.Ambient = material.Diffuse = material.Emissive = material.Specular = new Color4(Color.White); material.Power = 1f; device.SetStreamSource(0, vertexBuffer, 0, vertexSize); device.VertexDeclaration = vertexDeclaration; device.Indices = indexBuffer; device.Material = material; device.SetTexture(0, texture); var param = effect.GetParameter(null, "mWorldMatrixArray"); var boneWorldTransforms = bones.OrderedBones.OrderBy(x => x.Id).Select(x => x.CombinedTransformation).ToArray(); effect.SetValue(param, boneWorldTransforms); effect.SetValue(effect.GetParameter(null, "mViewProj"), Matrix.Identity);// Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); effect.SetValue(effect.GetParameter(null, "MaterialDiffuse"), material.Diffuse); effect.SetValue(effect.GetParameter(null, "MaterialAmbient"), material.Ambient); effect.Technique = effect.GetTechnique(0); var passes = effect.Begin(FX.DoNotSaveState); for (var i = 0; i < passes; i++) { effect.BeginPass(i); device.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, skin.Vertices.Length, 0, skin.Indicies.Length / 3); effect.EndPass(); } effect.End(); } Again, I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? Also, whatever I set in the bone transformation matrices doesn't seem to have an effect on my model. If I set every bone transformation to a zero matrix, the model still shows up as if nothing had happened, but changing the Pos field in shader output makes the model disappear. I don't understand why I'm getting this kind of behaviour. Thank you!

    Read the article

  • XNA - Finding boundaries in isometric tilemap

    - by Yheeky
    I have an issue with my 2D isometric engine. I'm using my own 2D camera class which works with matrices and need to find the tilemaps boundaries so the user always sees the map. Currently my map size is 100x100 (with 128x128 tiles) so the calculation (e.g. for the right boundary) is: var maxX = (TileMap.MapWidth + 1) * (TileMap.TileWidth / 2) - ViewSize.X; var maxX = (100 + 1) * (128 / 2) - 1360; // = 5104 pixels. This works fine while having scale factor of 1.0f but not for any other zoom factor. When I zoom out to 0.9f the right border should be at approx. 4954. I´m using the following code for transformation but I always get a wrong value: var maxXVector = new Vector2(maxX, 0); var maxXTransformed = Vector2.Transform(maxXVector, tempTransform).X; The result is 4593. Does anyone of you have an idea what I´m during wrong? Thanks for your help! Yheeky

    Read the article

  • how to move the camera behind a model with the same angle? in XNA

    - by Mehdi Bugnard
    I meet are having difficulty in moving my camera behind an object in a 3D world. I would create two view mode. 1: for fps (first person). 2nd: external view behind the character (second person). I searched the net some example but it does not work in my project. Here is my code used to change view if F2 is pressed //Camera double X1 = this.camera.PositionX; double X2 = this.player.Position.X; double Z1 = this.camera.PositionZ; double Z2 = this.player.Position.Z; //Verify that the user must not let the press F2 if (!this.camera.IsF2TurnedInBoucle) { // If the view mode is the second person if (this.camera.ViewCamera_type == CameraSimples.ChangeView.SecondPerson) { this.camera.ViewCamera_type = CameraSimples.ChangeView.firstPerson; //Calcul position - ?? Here my problem double direction = Math.Atan2(X2 - X1, Z2 - Z1) * 180.0 / 3.14159265; //Calcul angle - ?? Here my problem this.camera.position = .. this.camera.rotation = .. this.camera.MouseRadian_LeftrightRot = (float)direction; } //IF mode view is first person else { //....

    Read the article

  • Data-driven animation states

    - by user8363
    I'm trying to handle animations in a 2D game engine hobby project, without hard-coding them. Hard coding animation states seems like a common but very strange phenomenon, to me. A little background: I'm working with an entity system where components are bags of data and subsystems act upon them. I chose to use a polling system to update animation states. With animation states I mean: "walking_left", "running_left", "walking_right", "shooting", ... My idea to handle animations was to design it as a data driven model. Data could be stored in an xml file, a rdbms, ... And could be loaded at the start of a game / level/ ... This way you can easily edit animations and transitions without having to go change the code everywhere in your game. As an example I made an xml draft of the data definitions I had in mind. One very important piece of data would simply be the description of an animation. An animation would have a unique id (a descriptive name). It would hold a reference id to an image (the sprite sheet it uses, because different animations may use different sprite sheets). The frames per second to run the animation on. The "replay" here defines if an animation should be run once or infinitely. Then I defined a list of rectangles as frames. <animation id='WIZARD_WALK_LEFT'> <image id='WIZARD_WALKING' /> <fps>50</fps> <replay>true</replay> <frames> <rectangle> <x>0</x> <y>0</y> <width>45</width> <height>45</height> </rectangle> <rectangle> <x>45</x> <y>0</y> <width>45</width> <height>45</height> </rectangle> </frames> </animation> Animation data would be loaded and held in an animation resource pool and referenced by game entities that are using it. It would be treated as a resource like an image, a sound, a texture, ... The second piece of data to define would be a state machine to handle animation states and transitions. This defines each state a game entity can be in, which states it can transition to and what triggers that state change. This state machine would differ from entity to entity. Because a bird might have states "walking" and "flying" while a human would only have the state "walking". However it could be shared by different entities because multiple humans will probably have the same states (especially when you define some common NPCs like monsters, etc). Additionally an orc might have the same states as a human. Just to demonstrate that this state definition might be shared but only by a select group of game entities. <state id='IDLE'> <event trigger='LEFT_DOWN' goto='MOVING_LEFT' /> <event trigger='RIGHT_DOWN' goto='MOVING_RIGHT' /> </state> <state id='MOVING_LEFT'> <event trigger='LEFT_UP' goto='IDLE' /> <event trigger='RIGHT_DOWN' goto='MOVING_RIGHT' /> </state> <state id='MOVING_RIGHT'> <event trigger='RIGHT_UP' goto='IDLE' /> <event trigger='LEFT_DOWN' goto='MOVING_LEFT' /> </state> These states can be handled by a polling system. Each game tick it grabs the current state of a game entity and checks all triggers. If a condition is met it changes the entity's state to the "goto" state. The last part I was struggling with was how to bind animation data and animation states to an entity. The most logical approach seemed to me to add a pointer to the state machine data an entity uses and to define for each state in that machine what animation it uses. Here is an xml example how I would define the animation behavior and graphical representation of some common entities in a game, by addressing animation state and animation data id. Note that both "wizard" and "orc" have the same animation states but a different animation. Also, a different animation could mean a different sprite sheet, or even a different sequence of animations (an animation could be longer or shorter). <entity name="wizard"> <state id="IDLE" animation="WIZARD_IDLE" /> <state id="MOVING_LEFT" animation="WIZARD_WALK_LEFT" /> </entity> <entity name="orc"> <state id="IDLE" animation="ORC_IDLE" /> <state id="MOVING_LEFT" animation="ORC_WALK_LEFT" /> </entity> When the entity is being created it would add a list of states with state machine data and an animation data reference. In the future I would use the entity system to build whole entities by defining components in a similar xml format. -- This is what I have come up with after some research. However I had some trouble getting my head around it, so I was hoping op some feedback. Is there something here what doesn't make sense, or is there a better way to handle these things? I grasped the idea of iterating through frames but I'm having trouble to take it a step further and this is my attempt to do that.

    Read the article

  • Exporting XNA class library as a DLL file

    - by Will Bagley
    I have downloaded an open source project that I intend to use with my current game. The download came with all the class files from the original project as well as a pre-compiled DLL file representing the project. I was able to easily link this DLL with my current project and get it working just fine, no problems there. The problem I now have is that I want to make a couple of changes to the original libraries (extend its functionality a bit to better suit my needs) and re-export the class library as a DLL again, but I have no clue how to do this. Is there some simple way in VS where I can just take the class library and export/compile it as a DLL file again or is there more to it than that? This seems like something that should be pretty simple but my efforts to find an answer have so far come up with nothing. Thanks in advance.

    Read the article

  • Unity: parallel vectors and cross product, how to compare vectors

    - by Heisenbug
    I read this post explaining a method to understand if the angle between 2 given vectors and the normal to the plane described by them, is clockwise or anticlockwise: public static AngleDir GetAngleDirection(Vector3 beginDir, Vector3 endDir, Vector3 upDir) { Vector3 cross = Vector3.Cross(beginDir, endDir); float dot = Vector3.Dot(cross, upDir); if (dot > 0.0f) return AngleDir.CLOCK; else if (dot < 0.0f) return AngleDir.ANTICLOCK; return AngleDir.PARALLEL; } After having used it a little bit, I think it's wrong. If I supply the same vector as input (beginDir equal to endDir), the cross product is zero, but the dot product is a little bit more than zero. I think that to fix that I can simply check if the cross product is zero, means that the 2 vectors are parallel, but my code doesn't work. I tried the following solution: Vector3 cross = Vector3.Cross(beginDir, endDir); if (cross == Vector.zero) return AngleDir.PARALLEL; And it doesn't work because comparison between Vector.zero and cross is always different from zero (even if cross is actually [0.0f, 0.0f, 0.0f]). I tried also this: Vector3 cross = Vector3.Cross(beginDir, endDir); if (cross.magnitude == 0.0f) return AngleDir.PARALLEL; it also fails because magnitude is slightly more than zero. So my question is: given 2 Vector3 in Unity, how to compare them? I need the elegant equivalent version of this: if (beginDir.x == endDir.x && beginDir.y == endDir.y && beginDir.z == endDir.z) return true;

    Read the article

  • Interesting/Innovative Open Source tools for indie games [closed]

    - by Gastón
    Just out of curiosity, I want to know opensource tools or projects that can add some interesting features to indie games, preferably those that could only be found on big-budget games. EDIT: As suggested by The Communist Duck and Joe Wreschnig, I'm putting the examples as answers. EDIT 2: Please do not post tools like PyGame, Inkscape, Gimp, Audacity, Slick2D, Phys2D, Blender (except for interesting plugins) and the like. I know they are great tools/libraries and some would argue essential to develop good games, but I'm looking for more rare projects. Could be something really specific or niche, like generating realistic trees and plants, or realistic AI for animals.

    Read the article

  • Using 2D sprites and 3D models together

    - by Sweta Dwivedi
    I have gone through a few posts that talks about changing the GraphicsDevice.BlendState and GraphicsDevice.DepthStencilState (SpriteBatch & Render states). . however even after changing the states .. i cant see my 3D model on the screen.. I see the model for a second before i draw my video in the background. . Here is the code: case GameState.InGame: GraphicsDevice.Clear(Color.AliceBlue); spriteBatch.Begin(); if (player.State != MediaState.Stopped) { videoTexture = player.GetTexture(); } Rectangle screen = new Rectangle(GraphicsDevice.Viewport.X, GraphicsDevice.Viewport.Y, GraphicsDevice.Viewport.Width, GraphicsDevice.Viewport.Height); // Draw the video, if we have a texture to draw. if (videoTexture != null) { spriteBatch.Draw(videoTexture, screen, Color.White); if (Selected_underwater == true) { spriteBatch.DrawString(font, "MaxX , MaxY" + maxWidth + "," + maxHeight, new Vector2(400, 10), Color.Red); spriteBatch.Draw(kinectRGBVideo, new Rectangle(0, 0, 100, 100), Color.White); spriteBatch.Draw(butterfly, handPosition, Color.White); foreach (AnimatedSprite a in aSprites) { a.Draw(spriteBatch); } } if(Selected_planet == true) { spriteBatch.Draw(kinectRGBVideo, new Rectangle(0, 0, 100, 100), Color.White); spriteBatch.Draw(butterfly, handPosition, Color.White); spriteBatch.Draw(videoTexture,screen,Color.White); GraphicsDevice.BlendState = BlendState.Opaque; GraphicsDevice.DepthStencilState = DepthStencilState.Default; GraphicsDevice.SamplerStates[0] = SamplerState.LinearWrap; foreach (_3DModel m in Solar) { m.DrawModel(); } } spriteBatch.End(); break;

    Read the article

  • 3D Ball Physics Theory: collision response on ground and against walls?

    - by David
    I'm really struggling to get a strong grasp on how I should be handling collision response in a game engine I'm building around a 3D ball physics concept. Think Monkey Ball as an example of the type of gameplay. I am currently using sphere-to-sphere broad phase, then AABB to OBB testing (the final test I am using right now is one that checks if one of the 8 OBB points crosses the planes of the object it is testing against). This seems to work pretty well, and I am getting back: Plane that object is colliding against (with a point on the plane, the plane's normal, and the exact point of intersection. I've tried what feels like dozens of different high-level strategies for handling these collisions, without any real success. I think my biggest problem is understanding how to handle collisions against walls in the x-y axes (left/right, front/back), which I want to have elasticity, and the ground (z-axis) where I want an elastic reaction if the ball drops down, but then for it to eventually normalize and be kept "on the ground" (not go into the ground, but also not continue bouncing). Without kluging something together, I'm positive there is a good way to handle this, my theories just aren't getting me all the way there. For physics modeling and movement, I am trying to use a Euler based setup with each object maintaining a position (and destination position prior to collision detection), a velocity (which is added onto the position to determine the destination position), and an acceleration (which I use to store any player input being put on the ball, as well as gravity in the z coord). Starting from when I detect a collision, what is a good way to approach the response to get the expected behavior in all cases? Thanks in advance to anyone taking the time to assist... I am grateful for any pointers, and happy to post any additional info or code if it is useful. UPDATE Based on Steve H's and eBusiness' responses below, I have adapted my collision response to what makes a lot more sense now. It was close to right before, but I didn't have all the right pieces together at the right time! I have one problem left to solve, and that is what is causing the floor collision to hit every frame. Here's the collision response code I have now for the ball, then I'll describe the last bit I'm still struggling to understand. // if we are moving in the direction of the plane (against the normal)... if (m_velocity.dot(intersection.plane.normal) <= 0.0f) { float dampeningForce = 1.8f; // eventually create this value based on mass and acceleration // Calculate the projection velocity PVRTVec3 actingVelocity = m_velocity.project(intersection.plane.normal); m_velocity -= actingVelocity * dampeningForce; } // Clamp z-velocity to zero if we are within a certain threshold // -- NOTE: this was an experimental idea I had to solve the "jitter" bug I'll describe below float diff = 0.2f - abs(m_velocity.z); if (diff > 0.0f && diff <= 0.2f) { m_velocity.z = 0.0f; } // Take this object to its new destination position based on... // -- our pre-collision position + vector to the collision point + our new velocity after collision * time // -- remaining after the collision to finish the movement m_destPosition = m_position + intersection.diff + (m_velocity * intersection.tRemaining * GAMESTATE->dt); The above snippet is run after a collision is detected on the ball (collider) with a collidee (floor in this case). With a dampening force of 1.8f, the ball's reflected "upward" velocity will eventually be overcome by gravity, so the ball will essentially be stuck on the floor. THIS is the problem I have now... the collision code is running every frame (since the ball's z-velocity is constantly pushing it a collision with the floor below it). The ball is not technically stuck, I can move it around still, but the movement is really goofy because the velocity and position keep getting affected adversely by the above snippet. I was experimenting with an idea to clamp the z-velocity to zero if it was "close to zero", but this didn't do what I think... probably because the very next frame the ball gets a new gravity acceleration applied to its velocity regardless (which I think is good, right?). Collisions with walls are as they used to be and work very well. It's just this last bit of "stickiness" to deal with. The camera is constantly jittering up and down by extremely small fractions too when the ball is "at rest". I'll keep playing with it... I like puzzles like this, especially when I think I'm close. Any final ideas on what I could be doing wrong here? UPDATE 2 Good news - I discovered I should be subtracting the intersection.diff from the m_position (position prior to collision). The intersection.diff is my calculation of the difference in the vector of position to destPosition from the intersection point to the position. In this case, adding it was causing my ball to always go "up" just a little bit, causing the jitter. By subtracting it, and moving that clamper for the velocity.z when close to zero to being above the dot product (and changing the test from <= 0 to < 0), I now have the following: // Clamp z-velocity to zero if we are within a certain threshold float diff = 0.2f - abs(m_velocity.z); if (diff > 0.0f && diff <= 0.2f) { m_velocity.z = 0.0f; } // if we are moving in the direction of the plane (against the normal)... float dotprod = m_velocity.dot(intersection.plane.normal); if (dotprod < 0.0f) { float dampeningForce = 1.8f; // eventually create this value based on mass and acceleration? // Calculate the projection velocity PVRTVec3 actingVelocity = m_velocity.project(intersection.plane.normal); m_velocity -= actingVelocity * dampeningForce; } // Take this object to its new destination position based on... // -- our pre-collision position + vector to the collision point + our new velocity after collision * time // -- remaining after the collision to finish the movement m_destPosition = m_position - intersection.diff + (m_velocity * intersection.tRemaining * GAMESTATE->dt); UpdateWorldMatrix(m_destWorldMatrix, m_destOBB, m_destPosition, false); This is MUCH better. No jitter, and the ball now "rests" at the floor, while still bouncing off the floor and walls. The ONLY thing left is that the ball is now virtually "stuck". He can move but at a much slower rate, likely because the else of my dot product test is only letting the ball move at a rate multiplied against the tRemaining... I think this is a better solution than I had previously, but still somehow not the right idea. BTW, I'm trying to journal my progress through this problem for anyone else with a similar situation - hopefully it will serve as some help, as many similar posts have for me over the years.

    Read the article

  • cross resolution level design advice [on hold]

    - by Mike
    I was looking for some beginner advice regarding level design across multiple resolutions. I believe the answer is likely "it depends", but any input from anyone with real experience is very appreciated. Basically, I am building a 2D Super Metroid type game. If rooms/levels are to be a tiled grid, what are some general best practices for designing rooms when taking into account different resolutions? Since more or less tiles could fit vertically on a single screen depending on the resolution, is it better to design towards possibly having more of the room visible depending on the screen (with a bare minimum needed for gameplay), or should I fix the design at a certain tile height and scale the graphics?

    Read the article

  • DirectWrite Producing Strange Artifacts?

    - by smoth190
    I've written the basis to my UI system around Direct2D. I like it because it's fast and easy to use (even if I had to do some messy work to get it to work with DirectX11). However, I notice when using DirectWrite I'm getting strange problems with my text. As you can see, the e is a little screwwed up, and it overall looks a little bumpy. This only happens with certain fonts in certain sizes, and with certain arrangements of letters. This particular example is Verdana in size 16.0 font. Can I fix this? It's pretty annoying to change all my words and fonts because of this problem.

    Read the article

  • How to implement a score database in Android

    - by Michael Seun Araromi
    I making a 2d game for android using opengl-es technology. It is a space shooting game where the player shoots enemy ships. I want to keep a track of score for the amount of enemy ships destroyed and a record of a local highscore, I want the score to be incremented whenever an enemy is destroyed. I also want a way of displaying both score and highscore on the game screen. I am not farmiliar with databases at all and I will appreciate a clear answer or a link to a good tutorial for my cause. Thanks

    Read the article

  • How a "Collision System" should be implemented?

    - by nathan
    My game is written using a entity system approach using Artemis Framework. Right know my collision detection is called from the Movement System but i'm wondering if it's a proper way to do collision detection using such an approach. Right know i'm thinking of a new system dedicated to collision detection that would proceed all the solid entities to check if they are in collision with another one. I'm wondering if it's a correct way to handle collision detection with an entity system approach? Also, how should i implement this collision system? I though of an IntervalEntitySystem that would check every 200ms (this value is chosen regarding the Artemis documentation) if some entities are colliding. protected void processEntities(ImmutableBag<Entity> ib) { for (int i = 0; i < ib.size(); i++) { Entity e = ib.get(i); //check of collision with other entities here } }

    Read the article

  • A star algorithm implementation problems

    - by bryan226
    I’m having some trouble implementing the A* algorithm in a 2D tile based game. The problem is basically that the algorithm gets stuck when something gets in its direct way (e.g. walls) Note that it only allows Horizontal and Vertical movement. Here's a picture as it works fine across the map without something in its direct way: (Green tile = destination, Blue = In closed list, Green = in open list) This is what happens if I try to walk 'around' a wall: I calculate costs with the F = G + H formula: G = 1 Cost per Step H = 10 Cost per Step //Count how many tiles are between current-tile & destination-tile The functions: short c_astar::GuessH(short Startx,short Starty,short Destinationx,short Destinationy) { hgeVector Start, Destination; Start.x = Startx; Start.y = Starty; Destination.x = Destinationx; Destination.y = Destinationy; short a = 0; short b = 0; if(Start.x > Destination.x) a = Start.x - Destination.x; else a = Destination.x - Start.x; if(Start.y > Destination.y) b = Start.y - Destination.y; else b = Destination.y - Start.y; return (a+b)*10; } short c_astar::GuessG(short Startx,short Starty,short Currentx,short Currenty) { hgeVector Start, Destination; Start.x = Startx; Start.y = Starty; Destination.x = Currentx; Destination.y = Currenty; short a = 0; short b = 0; if(Start.x > Destination.x) a = Start.x - Destination.x; else a = Destination.x - Start.x; if(Start.y > Destination.y) b = Start.y - Destination.y; else b = Destination.y - Start.y; return (a+b); } At the end of the loop I check which tile is the cheapest to go according to its F value: Then some quick checks are done for each tile (UP,DOWN,LEFT,RIGHT): //...CX are holding the F value of the TILE specified // Info: C0 = Center (Current) // C1 = UP // C2 = DOWN // C3 = LEFT // C4 = RIGHT //Quick checks if(((C1 < C2) && (C1 < C3) && (C1 < C4))) { Current.y -= 1; bSimilar = false; if(DEBUG) hge->System_Log("C1 < ALL"); } //.. same for C2,C3 & C4 If there are multiple tiles with the same F value: It’s actually a switch for DOWNLEFT,UPRIGHT.. etc. Here’s one of it: case UPRIGHT: { //UP Temporary = Current; Temporary.y -= 1; bTileStatus[0] = IsTileWalkable(Temporary.x,Temporary.y); if(bTileStatus[0]) { //Proceed normal we are OK & walkable Tilex.Tile = map.at(Temporary.y).at(Temporary.x); //Search in lists if(SearchInClosedList(Tilex.Tile.ID,C0)) bFoundInClosedList[0] = true; if(SearchInOpenList(Tilex.Tile.ID,C0)) bFoundInOpenList[0] = true; //RIGHT Temporary = Current; Temporary.x += 1; bTileStatus[1] = IsTileWalkable(Temporary.x,Temporary.y); if(bTileStatus[1]) { //Proceed normal we are OK & walkable Tilex.Tile = map.at(Temporary.y).at(Temporary.x); //Search in lists if(SearchInClosedList(Tilex.Tile.ID,C0)) bFoundInClosedList[1] = true; if(SearchInOpenList(Tilex.Tile.ID,C0)) bFoundInOpenList[1] = true; //************************************************* // Purpose: ClosedList behavior //************************************************* if(bFoundInClosedList[0] && !bFoundInClosedList[1]) { //UP found in ClosedList. Go RIGHT return RIGHT; } if(!bFoundInClosedList[0] && bFoundInClosedList[1]) { //RIGHT found in ClosedList. Go UP return UP; } if(bFoundInClosedList[0] && bFoundInClosedList[1]) { //Both found in ClosedList. Random value switch(hge->Random_Int(8,9)) { case 8: return UP; break; case 9: return RIGHT; break; } } //************************************************* // Purpose: OpenList behavior //************************************************* if(bFoundInOpenList[0] && !bFoundInOpenList[1]) { //UP found in OpenList. Go RIGHT return RIGHT; } if(!bFoundInOpenList[0] && bFoundInOpenList[1]) { //RIGHT found in OpenList. Go UP return UP; } if(bFoundInOpenList[0] && bFoundInOpenList[1]) { //Both found in OpenList. Random value switch(hge->Random_Int(8,9)) { case 8: return UP; break; case 9: return RIGHT; break; } } } else if(!bTileStatus[1]) { //RIGHT is not walkable OR out of range //Choose UP return UP; } } else if(!bTileStatus[0]) { //UP is not walkable OR out of range //Fast check RIGHT Temporary = Current; Temporary.x += 1; bTileStatus[1] = IsTileWalkable(Temporary.x,Temporary.y); if(bTileStatus[1]) { return RIGHT; } else return FAILED; //Failed, no valid path found! } } break; A log for the second picture: (Cut down to ten passes, because it’s just repeating itself) ----------------------------------------------------- PASS: 1 | C1: 211 | C2: 191 | C3: 211 | C4: 191 DOWN + RIGHT SIMILAR Going DOWN ----------------------------------------------------- PASS: 2 | C1: 200 | C2: 182 | C3: 202 | C4: 182 DOWN + RIGHT SIMILAR Going DOWN ----------------------------------------------------- PASS: 3 | C1: 191 | C2: 193 | C3: 193 | C4: 173 C4 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 4 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going UP Tile(12.000000,5.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 5 | C1: 191 | C2: 173 | C3: 191 | C4: 999 C2 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 6 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going UP Tile(12.000000,5.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 7 | C1: 191 | C2: 173 | C3: 191 | C4: 999 C2 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 8 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going LEFT ----------------------------------------------------- PASS: 9 | C1: 191 | C2: 193 | C3: 193 | C4: 173 C4 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 10 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going LEFT ----------------------------------------------------- Its always going after the cheapest F value, which seems to be wrong. If someone could point me to the right direction I'd be thankful. Regards, bryan226

    Read the article

  • Understanding how to create/use textures for games when limited by power of two sizes

    - by Matthias Reisner
    I have some questions about the creating graphics for a game. As an example. I want to create a motorbike. (1pixel = 1centimeter) So my motorbike will have 200 width and 150 height. (200x150) But the libgdx only allows to load sizes with the power of 2?! (2,4,8,16,...) First I thought about that way. I will create my bike with the size (200x150) and save it as png. Than I will open it again (e.g. with gimp) resize the image to a size which uses values with power of 2 (128x128). I will load that as texture in the programm and set width as 200 and height as 150. But wouldn't it be a problem? Because I will lose some pixel information when I make the first conversation.?! Isn't it?

    Read the article

  • The best way to structure/design game code

    - by Edward
    My question is quite broad and related to the 2D game code design/architecture/structure. Usually the main game consists of the main loop where you update & render your world states. However, it's recommended for many purposes to separate rendering from the game-logic and so on. I am kinda confused about the whole situation. Many game engines/libs/sdks don't follow separation schema. They propagate a way where you define some scenes/stages and they contain some objects and the scene/stage controls the user input and so on. For example, in cocos2d(-x) and libgdx (stage2d) the games are usually done the way that the update logic happens at the same time/place as rendering. Also, the propagated way is to have a structure where an object knows how to draw itself - which is not a separation of updating & rendering. The same with Flash based games, they are usually done the way when an object (class) contains a swf or a texture and some data and holds some update logic itself, or updated from main Scene. And again this object already knows how to draw itself via "addChild". Also, some people recommend to use MVC pattern, which will require to completely obey the structure of those engines/libs/sdks. Maybe I am overthinking everything, but I am totally confused. I would be grateful if somebody could point me to a correct direction with the game code structures. What is your way of doing things in libgdx/cocos2d/flash?

    Read the article

  • Double sides face with two normals

    - by Marnix
    I think this isn't possible, but I just want to check this: Is it possible to create a face in opengl that has two normals? So: I want the inside and outside of some cilinder to be drawn, but I want the lights to do as expected and not calculate it for the normal given. I was trying to do this with backface culling off, so I would have both faces, but the light was wrongly calculated of course. Is this possible, or do I have to draw an inside and an outside? So draw twice?

    Read the article

  • Issues with touch buttons in XNA (Release state to be precise)

    - by Aditya
    I am trying to make touch buttons in WP8 with all the states (Pressed, Released, Moved), but the TouchLocationState.Released is not working. Here's my code: Class variables: bool touching = false; int touchID; Button tempButton; Button is a separate class with a method to switch states when touched. The Update method contains the following code: TouchCollection touchCollection = TouchPanel.GetState(); if (!touching && touchCollection.Count > 0) { touching = true; foreach (TouchLocation location in touchCollection) { for (int i = 0; i < menuButtons.Count; i++) { touchID = location.Id; // store the ID of current touch Point touchLocation = new Point((int)location.Position.X, (int)location.Position.Y); // create a point Button button = menuButtons[i]; if (GetMenuEntryHitBounds(button).Contains(touchLocation)) // a method which returns a rectangle. { button.SwitchState(true); // change the button state tempButton = button; // store the pressed button for accessing later } } } } else if (touchCollection.Count == 0) // clears the state of all buttons if no touch is detected { touching = false; for (int i = 0; i < menuButtons.Count; i++) { Button button = menuButtons[i]; button.SwitchState(false); } } menuButtons is a list of buttons on the menu. A separate loop (within the Update method) after the touched variable is true if (touching) { TouchLocation location; TouchLocation prevLocation; if (touchCollection.FindById(touchID, out location)) { if (location.TryGetPreviousLocation(out prevLocation)) { Point point = new Point((int)location.Position.X, (int)location.Position.Y); if (prevLocation.State == TouchLocationState.Pressed && location.State == TouchLocationState.Released) { if (GetMenuEntryHitBounds(tempButton).Contains(point)) // Execute the button action. I removed the excess } } } } The code for switching the button state is working fine but the code where I want to trigger the action is not. location.State == TouchLocationState.Released mostly ends up being false. (Even after I release the touch, it has a value of TouchLocationState.Moved) And what is more irritating is that it sometimes works! I am really confused and stuck for days now. Is this the right way? If yes then where am I going wrong? Or is there some other more effective way to do this? PS: I also posted this question on stack overflow then realized this question is more appropriate in gamedev. Sorry if it counts as being redundant.

    Read the article

  • Camera doesnt move on opengl qt

    - by hugo
    Here is my code, as my subject indicates i have implemented a camera but i couldnt make it move,Thanks in advance. #define PI_OVER_180 0.0174532925f define GL_CLAMP_TO_EDGE 0x812F include "metinalifeyyaz.h" include include include include include include include metinalifeyyaz::metinalifeyyaz(QWidget *parent) : QGLWidget(parent) { this->setFocusPolicy(Qt:: StrongFocus); time = QTime::currentTime(); timer = new QTimer(this); timer->setSingleShot(true); connect(timer, SIGNAL(timeout()), this, SLOT(updateGL())); xpos = yrot = zpos = 0; walkbias = walkbiasangle = lookupdown = 0.0f; keyUp = keyDown = keyLeft = keyRight = keyPageUp = keyPageDown = false; } void metinalifeyyaz::drawBall() { //glTranslatef(6,0,4); glutSolidSphere(0.10005,300,30); } metinalifeyyaz:: ~metinalifeyyaz(){ glDeleteTextures(1,texture); } void metinalifeyyaz::initializeGL(){ glShadeModel(GL_SMOOTH); glClearColor(1.0,1.0,1.0,0.5); glClearDepth(1.0f); glEnable(GL_DEPTH_TEST); glEnable(GL_TEXTURE_2D); glDepthFunc(GL_LEQUAL); glClearColor(1.0,1.0,1.0,1.0); glShadeModel(GL_SMOOTH); GLfloat mat_specular[]={1.0,1.0,1.0,1.0}; GLfloat mat_shininess []={30.0}; GLfloat light_position[]={1.0,1.0,1.0}; glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular); glMaterialfv(GL_FRONT,GL_SHININESS,mat_shininess); glLightfv(GL_LIGHT0, GL_POSITION, light_position); glEnable(GL_LIGHT0); glEnable(GL_LIGHTING); QImage img1 = convertToGLFormat(QImage(":/new/prefix1/halisaha2.bmp")); QImage img2 = convertToGLFormat(QImage(":/new/prefix1/white.bmp")); glGenTextures(2,texture); glBindTexture(GL_TEXTURE_2D, texture[0]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img1.width(), img1.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img1.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glBindTexture(GL_TEXTURE_2D, texture[1]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img2.width(), img2.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img2.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST); // Really nice perspective calculations } void metinalifeyyaz::resizeGL(int w, int h){ if(h==0) h=1; glViewport(0,0,w,h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, static_cast<GLfloat>(w)/h,0.1f,100.0f); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); } void metinalifeyyaz::paintGL(){ movePlayer(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); GLfloat xtrans = -xpos; GLfloat ytrans = -walkbias - 0.50f; GLfloat ztrans = -zpos; GLfloat sceneroty = 360.0f - yrot; glLoadIdentity(); glRotatef(lookupdown, 1.0f, 0.0f, 0.0f); glRotatef(sceneroty, 0.0f, 1.0f, 0.0f); glTranslatef(xtrans, ytrans+50, ztrans-130); glLoadIdentity(); glTranslatef(1.0f,0.0f,-18.0f); glRotatef(45,1,0,0); drawScene(); int delay = time.msecsTo(QTime::currentTime()); if (delay == 0) delay = 1; time = QTime::currentTime(); timer->start(qMax(0,10 - delay)); } void metinalifeyyaz::movePlayer() { if (keyUp) { xpos -= sin(yrot * PI_OVER_180) * 0.5f; zpos -= cos(yrot * PI_OVER_180) * 0.5f; if (walkbiasangle >= 360.0f) walkbiasangle = 0.0f; else walkbiasangle += 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } else if (keyDown) { xpos += sin(yrot * PI_OVER_180)*0.5f; zpos += cos(yrot * PI_OVER_180)*0.5f ; if (walkbiasangle <= 7.0f) walkbiasangle = 360.0f; else walkbiasangle -= 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } if (keyLeft) yrot += 0.5f; else if (keyRight) yrot -= 0.5f; if (keyPageUp) lookupdown -= 0.5; else if (keyPageDown) lookupdown += 0.5; } void metinalifeyyaz::keyPressEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_Escape: close(); break; case Qt::Key_F1: setWindowState(windowState() ^ Qt::WindowFullScreen); break; default: QGLWidget::keyPressEvent(event); case Qt::Key_PageUp: keyPageUp = true; break; case Qt::Key_PageDown: keyPageDown = true; break; case Qt::Key_Left: keyLeft = true; break; case Qt::Key_Right: keyRight = true; break; case Qt::Key_Up: keyUp = true; break; case Qt::Key_Down: keyDown = true; break; } } void metinalifeyyaz::changeEvent(QEvent *event) { switch (event->type()) { case QEvent::WindowStateChange: if (windowState() == Qt::WindowFullScreen) setCursor(Qt::BlankCursor); else unsetCursor(); break; default: break; } } void metinalifeyyaz::keyReleaseEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_PageUp: keyPageUp = false; break; case Qt::Key_PageDown: keyPageDown = false; break; case Qt::Key_Left: keyLeft = false; break; case Qt::Key_Right: keyRight = false; break; case Qt::Key_Up: keyUp = false; break; case Qt::Key_Down: keyDown = false; break; default: QGLWidget::keyReleaseEvent(event); } } void metinalifeyyaz::drawScene(){ glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,1.0f); // glColor3f(0,0,1); //back glVertex3f(-6,0,-4); glVertex3f(-6,-0.5,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,-1.0f); //front glVertex3f(6,0,4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,0,4); glEnd(); glBegin(GL_QUADS); glNormal3f(-1.0f,0.0f,0.0f); // glColor3f(0,0,1); //left glVertex3f(-6,0,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); // glColor3f(0,0,1); //right glVertex3f(6,0,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(6,0,4); glEnd(); glBindTexture(GL_TEXTURE_2D, texture[0]); glBegin(GL_QUADS); glNormal3f(0.0f,1.0f,0.0f);//top glTexCoord2f(1.0f,0.0f); glVertex3f(6,0,-4); glTexCoord2f(1.0f,1.0f); glVertex3f(6,0,4); glTexCoord2f(0.0f,1.0f); glVertex3f(-6,0,4); glTexCoord2f(0.0f,0.0f); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,-1.0f,0.0f); //glColor3f(0,0,1); //bottom glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glEnd(); // glPushMatrix(); glBindTexture(GL_TEXTURE_2D, texture[1]); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); glTexCoord2f(1.0f,0.0f); //right far goal post front face glVertex3f(5,0.5,-0.95); glTexCoord2f(1.0f,1.0f); glVertex3f(5,0,-0.95); glTexCoord2f(0.0f,1.0f); glVertex3f(5,0,-1); glTexCoord2f(0.0f,0.0f); glVertex3f(5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(5,0.5,-1); glVertex3f(5,0,-1); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5,0,-0.95); glVertex3f(5, 0.5, -0.95); glColor3f(1,1,1); //right near goal post front face glVertex3f(5,0.5,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0,1); glVertex3f(5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(5,0.5,1); glVertex3f(5,0,1); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0.5, 0.95); glColor3f(1,1,1); //right crossbar front face glVertex3f(5,0.55,-1); glVertex3f(5,0.55,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5.05,0.5,1); glVertex3f(5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(5.05,0.5,-1); glVertex3f(5.05,0.5,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5,0.55,1); glVertex3f(5,0.55,-1); glColor3f(1,1,1); //left far goal post front face glVertex3f(-5,0.5,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5,0,-1); glVertex3f(-5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(-5,0.5,-1); glVertex3f(-5,0,-1); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5, 0.5, -0.95); glColor3f(1,1,1); //left near goal post front face glVertex3f(-5,0.5,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0,1); glVertex3f(-5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(-5,0.5,1); glVertex3f(-5,0,1); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0.5, 0.95); glColor3f(1,1,1); //left crossbar front face glVertex3f(-5,0.55,-1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5.05,0.5,1); glVertex3f(-5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(-5.05,0.5,-1); glVertex3f(-5.05,0.5,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.55,-1); glEnd(); // glPopMatrix(); // glPushMatrix(); // glTranslatef(0,0,0); // glutSolidSphere(0.10005,500,30); // glPopMatrix(); }

    Read the article

  • Turning on collision crashes game

    - by MomentumGaming
    I am getting a null pointer excecption to both my sprite and level. I am working on my mob class, and when I try to move him and the move function is called, the game crashes after checking collision with a null pointer excecption. Taking out the one line that actually checks if the tile located in front of it fixes the problem. Also, if i keep collision ON but don't move the position of the mob (the spider) the game works fine. I will have collision, and the spider appears on the screen, only problem is, getting it to move causes this nasty error that i just can't fix. true Exception in thread "Display" java.lang.NullPointerException at com.apcompsci.game.entity.mob.Mob.collision(Mob.java:67) at com.apcompsci.game.entity.mob.Mob.move(Mob.java:38) at com.apcompsci.game.entity.mob.spider.update(spider.java:58) at com.apcompsci.game.level.Level.update(Level.java:55) at com.apcompsci.game.Game.update(Game.java:128) at com.apcompsci.game.Game.run(Game.java:106) at java.lang.Thread.run(Unknown Source) Here is my renderMob mehtod: public void renderMob(int xp,int yp,Sprite sprite,int flip) { xp -= xOffset; yp-=yOffset; for(int y = 0; y<32; y++) { int ya = y + yp; int ys = y; if(flip == 2||flip == 3)ys = 31-y; for(int x = 0; x<32; x++) { int xa = x + xp; int xs = x; if(flip == 1||flip == 3)xs = 31-x; if(xa < -32 || xa >=width || ya<0||ya>=height) break; if(xa<0) xa =0; int col = sprite.pixels[xs+ys*32]; if(col!= 0x000000) pixels[xa+ya*width] = col; } } } My spider class which determines the sprite and where I control movement, also rendering the spider onto the screen, when I increment ya to move the sprite, I get the crash, but without ya++, it runs flawlessly with a spider sprite on screen: package com.apcompsci.game.entity.mob; import com.apcompsci.game.entity.mob.Mob.Direction; import com.apcompsci.game.graphics.Screen; import com.apcompsci.game.graphics.Sprite; import com.apcompsci.game.level.Level; public class spider extends Mob{ Direction dir; private Sprite sprite; private boolean walking; public spider(int x, int y) { this.x = x <<4; this.y = y <<4; sprite = sprite.spider_forward; } public void update() { int xa = 0, ya = 0; ya++; if(ya<0) { sprite = sprite.spider_forward; dir = Direction.UP; } if(ya>0) { sprite = sprite.spider_back; dir = Direction.DOWN; } if(xa<0) { sprite = sprite.spider_side; dir = Direction.LEFT; } if(xa>0) { sprite = sprite.spider_side; dir = Direction.LEFT; } if(xa!= 0 || ya!= 0) { System.out.println("true"); move(xa,ya); walking = true; } else{ walking = false; } } public void render(Screen screen) { screen.renderMob(x, y, sprite, 0); } } This is th mob class that contains the move() method that is called in the spider class above. This move method calls the collision method. tile and sprite comes up null in the debugger: package com.apcompsci.game.entity.mob; import java.util.ArrayList; import java.util.List; import com.apcompsci.game.entity.Entity; import com.apcompsci.game.entity.projectile.DemiGodProjectile; import com.apcompsci.game.entity.projectile.Projectile; import com.apcompsci.game.graphics.Sprite; public class Mob extends Entity{ protected Sprite sprite; protected boolean moving = false; protected enum Direction { UP,DOWN,LEFT,RIGHT } protected Direction dir; public void move(int xa,int ya) { if(xa != 0 && ya != 0) { move(xa,0); move(0,ya); return; } if(xa>0) dir = Direction.RIGHT; if(xa<0) dir = Direction.LEFT; if(ya>0)dir = Direction.DOWN; if(ya<0)dir = Direction.UP; if(!collision(xa,ya)){ x+= xa; y+=ya; } } public void update() { } public void shoot(int x, int y, double dir) { //dir = Math.toDegrees(dir); Projectile p = new DemiGodProjectile(x, y,dir); level.addProjectile(p); } public boolean collision(int xa,int ya) { boolean solid = false; for(int c = 0; c<4; c++) { int xt = ((x+xa) + c % 2 * 14 - 8 )/16; int yt = ((y+ya) + c / 2 * 12 +3 )/16; if(level.getTile(xt, yt).solid()) solid = true; } return solid; } public void render() { } } Finally, here is the method in which i call the add() method for the spider to add it to the level: protected void loadLevel(String path) { try{ BufferedImage image = ImageIO.read(SpawnLevel.class.getResource(path)); int w = width =image.getWidth(); int h = height = image.getHeight(); tiles = new int[w*h]; image.getRGB(0, 0, w,h, tiles,0, w); } catch(IOException e){ e.printStackTrace(); System.out.println("Exception! Could not load level file!"); } add(new spider(20,45)); } I don't think i need to include the level class but just in case, I have provided a gistHub link for better context. It contains all of the full classes listed above , plus my entity class and maybe another. Thanks for the help if you decide to do so, much appreciated! Also, please tell me if i'm in the wrong section of stackeoverflow, i figured that since this is the gamign section that it belonged but debugging code normally goes into the general section.

    Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >